- fix build on 10.6
- actually build it at all
Change-Id: Ib929f8b56e55f00191f7fcfb2be25975e46a1af2
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
qml2 needs QML2_IMPORT_PATH.
this didn't affect non-prefix builds (which most developers use), so
it wasn't too serious.
Change-Id: I435dca151348669b66f091f9a9324cd69394284e
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
a) qmlimportscanner has no built-in -importPath, so it can't be omitted
even for non-prefix builds, and b) the QMLPATHS variable is also used
further down, so we can't just do away with it.
amends a658fa40.
Change-Id: I42a47a82fe13694fbac3c4a3962ebbe1d7e7865b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
it helps enormously to use the flag correctly.
amends f0c34eb08f.
Change-Id: I04a63cc59e133169d9f6677f2f88ef98fd5c524c
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the condition is now consistent with that of the target itself (which
means that by setting target.CONFIG=no_dll one can actually suppress
installing the target itself even if it's not a dll, but anyway).
Task-number: QTBUG-39253
Change-Id: Id4684a550a33b463594ab537eaa9e1cbfb61e4ff
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
qdoc uses the indexes as "precompiled headers" to obtain type info
necessary to properly parse sources.
the indexes needed are the ones the module actually depends on
(publically).
Change-Id: I6aad0b511d2534d584f7947c8d800300eede94ff
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
the doc/ dirs in the build dir won't be created until the docs have been
built, so of course checking whether they are there during the qmake
phase is counterproductive.
this also means that we'll get some complaints about non-existing
directories (for repos that don't create any docs). there is no
reasonable way to query qmake which repos are affected, and writing
shell-specific code to query it at make time seems a bit overengineered.
Task-number: QTBUG-38862
Change-Id: Ie0588e75bfc39718fffd46f0df6785428e396eb2
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
the install dir may contain indexes from previous builds. a build must
never refer to previous builds.
Change-Id: I67c04df8f3f82bdbebb67e280f70795ed0a76ccf
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
even if we are not doing a top-level build, we still need to specify an
index dir. that may be the install dir or the qtbase build dir,
depending on whether we are building against an installed prefix build
or a non-prefix build (building against non-installed prefix builds
outside a top-level build is inherently impossible).
Task-number: QTBUG-35596
Change-Id: Ia37d429855480d3bfe36b7ee29e087029861bfc5
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
instead of adding all possible plugin paths (for which QMAKEMODULES
wouldn't have been a reliable source anyway), only add the paths of
plugins of the necessary types.
this necessitates that we create qt_plugin_<foo>.pri files also in shared
builds of qt when making a prefix build. we don't install them unless it's
a static build, though.
Change-Id: Ib56b009562a7131d4dc4dfc259b34ec6581b0f77
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Adds QApplicationPrivate::usesNativeStyle to check whether the
QApplication is using the native platform style.
This can be needed internally to decided whether to let the platform
plugins do stuff or do it interally, style dependent. E.g. letting the
platform plugin popup a QMenu vs. letting the style draw one.
Change-Id: Ibb5e11a4d9d1d2824685ff146786a9354ceef43c
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Makes it possible to use "android-extra-plugins" from qmake through the
ANDROID_EXTRA_PLUGINS variable.
Change-Id: I7c67e9f104e5397e094afff730efccb91949caa2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Some codecs can't handle the range outside ascii properly and would then
fail to read the data back in correctly.
Task-number: QTBUG-15543
Change-Id: I4c02921e787a939eeec0c7a11603b5896d756aef
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Store the value of QMessageBoxPrivate::autoAddOkButton
temporarily when automatically adding the "Show Details..."
button.
Task-number: QTBUG-39334
Change-Id: I173c83893548ee83b3d8ea2743f87686c32657e7
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
There are no automatic updates of the window when it moves, since
this is not required on most platforms. This broke drag and drop on
Android, because drag and drop creates a temporary window containing
a pixmap with a snapshot of its content. We need to make sure the old
and new location of the window is repainted when it has moved.
[ChangeLog][Android] Fixed repaint issues in drag and drop.
Task-number: QTBUG-35975
Change-Id: I7b043d728551d9963fb5acec804fb90aec5b50ff
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
This is pretty much the same thing that eglfs does.
Task-number: QTBUG-38960
Change-Id: Ibf310ca8e3a4e31e5310ab3a3d3e851eae31a4ad
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
There were several issues on startup of the application which
were caused by the fact that we would get the wrong
available screen geometry on startup, set this as the
initial surface size and then expose native windows with this
size. This would cause first a flicker of white on the early
expose and the window contents to jump around as the window was
resized to the actual available space on screen.
The fix for this is to postpone the first expose until we have
actually got a proper screen size from the main layout. We use
width,height = 0 as an indicator that the available geometry
is not yet known, and we skip posting any expose events before
this is set by the layout.
In addition, since we removed the surface before we shut down
the application, it was by a white rectangle before the
shutdown transition happens, and this white rectangle will
be animated instead of application contents.
To rectify this, we make sure the last surface in the stack
remains in the layout until it is either replaced by a different
surface or until the application has shut down. This way, the
shutdown animation will work on this surface instead.
[ChangeLog][Android] Fixed regression where there would be flickering
on startup and shutdown of the application.
Task-number: QTBUG-38960
Change-Id: Ia1579ca8c522d8beeab066f78070ad49009d0238
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Some languages (for example Finnish) need to customize punctuation
and capitalization in this case.
Change-Id: I9720626263f061adc7972bff18bcb59f2f2b382f
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
QCocoaEventDispatcher stores user input events in a queue in certain
cases. If the target of those events is destroyed, the events are later
sent to the stale window, causing a crash.
Task-number: QTBUG-39211
Change-Id: Ie55d2df5697c742bcb644ebf8c5028015a0b8148
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Don't interrupt the Qt event loop if the Qt event
loop isn't running (meaning processEvents has not/
will not be called). This can happen in the QMacNativeWidget
or plugin case where the native code calls [NSApp run]
and QApplication::exec() is never called.
In Qt 4 this was not necessary since UI event
processing was more direct: QCocoaView would call
QCoreApplication::sendMouseEvent/sendSpontaneousEvent
directly on mouse events.
Task-number: QTBUG-36225
Change-Id: I2894cbbca66a902652c9f8bc916e94ad8ce0e18e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Block flush until all bits have been flushed. This prevents Qt from trying to
draw over the buffer while it is still being cleared.
Change-Id: I49b90a7653ec3768411a1a94837bb31fec4d44e8
Reviewed-by: Frank Osterfeld <frank.osterfeld@kdab.com>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Bernd Weimer <bweimer@blackberry.com>
If QNX does not have inotify there is no native engine.
Change-Id: I042efd0b59f916f9e0b55bbe5c7f3fe7bb6914c8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
CRT dependencies should contain "Phone" in the name.
Change-Id: I1b0de01df6a016c20b59232f6068e9bb87e3f18c
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
It speeds up the extraction and it reduces memory consumption.
Change-Id: I188f7efbb826343e5bd75f63ace36522f0d7a24d
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
HSTRING needs to be released or handles will be leaked.
Instead use HString which takes care of resource management
on its own.
Task-Number: QTBUG-38115
Change-Id: I2c767776c1f22f45acd8dd77b693f30d63d894b9
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
The original dist target no longer copies files around, but
merely does the final packaging. It depends on a new recursive
distdir target, which handles copying distfiles to the distdir.
[ChangeLog][Tools][qmake] Added 'make dist' target for subdirs
projects (unix only)
Task-number: QTBUG-21910
Change-Id: Ib59139c3fe196caf832d8dcefab484ab91f1f5ce
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Testing whether alphaBufferSize() != 0 does not work, because when no alpha
channel is present, alphaBufferSize() can return '-1', which will cause
non-transparent windows to be wrongly cleared and an artifact will appear.
Change-Id: Id9e985f105c0bb302cc6f53960a5dbae2acdb921
Reviewed-by: Frank Osterfeld <frank.osterfeld@kdab.com>
Reviewed-by: Wolfgang Bremer <wbremer@blackberry.com>
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
When binding an FBO directly via glBindFramebuffer, the QOpenGLContext's
internal current_fbo, that is maintained by QOpenGLFramebufferObject,
becomes out of sync. This will lead to QOpenGLFramebufferObjects thinking
they are still bound.
Such state tracking should be avoided since it is becoming increasingly
difficult to keep it consistent between the various OpenGL API wrappers
and will never be robust enough when the application changes the state by
directly calling OpenGL functions.
current_fbo is now removed in QtGui. QtOpenGL is not touched.
Change-Id: Id809aab1306c9486d1e2ba3bb5aa93593659e920
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
This update is preparation for implementing the actual task
described in the bug. To implement it required converting
the QML type node and the QML basic type node to be first
order tree nodes instead of subtypes of the documentation
node. This cleans up a lot of messy logic in some places.
It was also necessary to split the getLink() function in the
html output generator into two functions, one still called
getLink(), which handles the \l command, and one called
qetAutoLink() which is called for generating auto links.
This should make qdoc run faster.
The basic infrastructure was also added for parsing the
string in the square brackets for the \l command.
There will be a further update to complete this task.
Note that some autolinks might not be generated due to
this change. I haven't seen any yet, but I believe there
will be some. This can be fixed later, if it is a problem.
Task-number: QTBUG-39221
Change-Id: I8135229984398408205ba901b9ef95ceac74683c
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
The selectable/selected states refer to items in a list and similar,
do not interpret them as text selection states.
Without this change NVDA for example announces text edits as selected
which makes no sense and which it doesn't do for native text items.
Change-Id: Ib1d109523bd4cc2b9b40ace8a8c3d7d3a7f9f25c
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
It will now share the same behavior as QGroupBox, which has NoFocus
if its not checkable.
This doesn't lure AT clients to stop and read its content (this is the
case for android accessibility) (designer seems to generate a tooltip
for each QDialogButtonBox, which will be read as the name).
Change-Id: I6cfacdd9c01299521222c773634df1e36971d982
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
The previous code resulted in that all regions that had some alpha
blending content had to be rasterized as bitmaps.
With this patch, we only need to fallback to proper alpha blending
if there is a background content to blend against.
If there is no background content we simly assume that the background
is white (which happen to be the most common paper color). It will
then be treated as a solid background.
Task-number: QTBUG-33548
Change-Id: I9d2c9be95a701704cdb3724480421db49b4cdd98
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
gestaltSystemVersion's encoding only has room for a single version
digit. Thus, OS X 10.10 would previously have been detected as OS X 10.9
(Apple's comments in the header even warn against this).
Change-Id: I41c35b1507d39e2958a9aaffaa8c48ac380f61d9
Reviewed-by: Samuel Gaist <samuel.gaist@edeltech.ch>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QSignalBlocker resets to the previous state, which might have already
been a blocked signal state.
Task-number: QTBUG-39352
Change-Id: I918cc6ea346755b940e027cee5d6704824fbba32
Reviewed-by: David Faure <david.faure@kdab.com>
