This was documented, but not what the code did.
Task-number: QTBUG-48529
Change-Id: I4849778c61dcae13be27c62b24717693c0c07d78
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This will be used in QTextStream to speed up padding processing.
[ChangeLog][QtCore][QString] Added resize(int, QChar) overload.
Change-Id: Id51f8cdacb167310157100b05cacf20e9a5d2716
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
In bind+connect scenario, rejected connection can trigger a read
notification while the socket is opened. But unlike UDP, reading from
the socket engine or emitting a readyRead() signal is not allowed for
the TCP socket in bound or connecting state.
To make a bind+connect scenario work properly, disable the read
notifications until a connection is established.
Task-number: QTBUG-50124
Change-Id: I7b3d015b0f6021fb9ff9f83560478aa5545f41f5
Reviewed-by: Richard J. Moore <rich@kde.org>
Probably correct.
The question is just why this code has survived for so many years.
Change-Id: Iaf01850476f9b066243abebb9ee6c5928d7ada19
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Probably correct.
The question is just why this code has survived for so many years.
Change-Id: Iaf01850476f9b066243abebb9ee6c5928d7ada19
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The test produces compiler warnings in release builds:
tst_qgraphicswidget.cpp: In member function 'void tst_QGraphicsWidget::setTabOrderAndReparent()':
tst_qgraphicswidget.cpp:1521:89: warning: 'w2' may be used uninitialized in this function [-Wmaybe-uninitialized]
tst_qgraphicswidget.cpp:1536:88: warning: 'w1' may be used uninitialized in this function [-Wmaybe-uninitialized]
Use arrays instead of the variables w1,2... and rewrite the helper
function compareFocusChain() to work on iterators allowing to
remove some temporary lists. Also return error messages in a
QByteArray ready for the Q[TRY_]VERIFY2 macros.
Change-Id: I43466921af59521d1faf00b75fe943508418abb3
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
/home has been observed to be writable on some CI machines.
Add checks verifying existence and correct permissions.
Change-Id: Ie0f952e20d0d8eb0b57234eea2e2ecb78f5a7b58
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
If the variant contains a known json type (value, array, object or
document), simply unwrap those. In the case of the json document
wrap the contained object/array into a QJsonValue.
This should be the expected behavior, and makes more sense than
returning a null QJsonValue.
Task-number: QTBUG-41234
Change-Id: Id084fc11220d51aaf78b7694fd0ebef1411f5c51
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Path normalization should happen only when NormalizePathSegments is set.
Use a less intrusive fix for the setPath("//path") issue that
commit aba336c2b4 was about.
This allows fromLocalFile("/tmp/.") to keep the "/." at the end,
which is useful for appending to the path later on (e.g. to get "/tmp/.hidden")
Change-Id: Ibc3d4d3276c1d3aaee1774e21e24d01af38fa880
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If the environment variable is set, but points to a non-existing directory,
the user would get a warning about chmod failing. Better be clear and
warn about the fact that the directory itself doesn't exist.
Also warn if $XDG_RUNTIME_DIR points to a file rather than a directory.
Task-number: QTBUG-48771
Change-Id: If84e72d768528ea4b80260afbbc18709b7b738a8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This partially reverts commit 025d6a778c.
Change-Id: I7b964b0d598abe46137c22177fe2b5dcca5bb812
Task-number: QTBUG-49831
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
Reviewed-by: Andy Shaw <andy.shaw@theqtcompany.com>
Commit ed0c0070 introduced qt_subtract_from_timeout but used it
incorrectly in several places.
Change-Id: I80ea16088707929a45d5a61ec6f3370f8e63d1cd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
When the byte sequence for a BOM occurs in the middle of a utf8 stream,
it is a ZWNBSP.
When a ZWNBSP occurs in the middle of a utf8 character sequence, and the
SIMD conversion does some work (meaning: the length is at least 16
characters long), it would not recognize the fact some charactes were
already decoded. So the conversion would then strip the ZWNBSP out,
thinking it's a BOM.
The non-SIMD conversion did not have this problem: the very first
character conversion would already set the headerdone flag.
Change-Id: I39aacf607e2e068107106254021a8042d164f628
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test was improved by:
- Use QCOMPARE instead of QVERIFY
- Use QTRY_ macro instead arbitrary qWait
- Use longer time line
The test executes faster and it should be less vulnerable to
an unreliable timer.
Change-Id: I92675015a6251b47eaf20b0fc916f3a36b52d783
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
The test run faster and it less vulnerable to an inaccurate time.
Change-Id: I19475095395dcf1e6d47fdbba5eeffabab1fc7b9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Now the test is less fragile to time and it executes 4s faster
Change-Id: Id3eb8ed2c03317e7d2f2c3cd17f889a8d8e7e5b4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
The test still can fail because 1s is quite a short time.
Change-Id: I6f42c182f2932d5a053f6a69667210529c9a7697
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
- Do not save geometry when going from maximized->fullscreen
- Use SW_SHOWNA instead SW_SHOWNOACTIVATE as otherwise the
maximized geometry is restored.
- Add a test for Windows.
Task-number: QTBUG-49709
Change-Id: Ic81e7398ee90d499a50b02192a45cb09276a2105
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Adds NEON version of interpolate_4_pixels used by smooth upscaling, and
bilinear sampling.
The SSE2 version is reordered to match the NEON version so they have
the same order of operations and a faster version that loads directly
into vector registers.
Testing is extended so we have a test of smoothness that can catch more
possible mistakes.
Change-Id: I0de4aecf5cb79468e7c8f19f421aa24b2955547c
Reviewed-by: Erik Verbruggen <erik.verbruggen@theqtcompany.com>
Strings do not have to be overly specific to test parser function.
Change-Id: I345dfec7fb4b8004661f6757cfd53b428ad87b6b
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
As for the #include-parser, the moc-detector's minimal C preprocessor
could be confused by a raw string into ignoring large chunks of code.
Change-Id: Id688e9a1f04628ce75a51a7d15269078c734288e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
If a / wasn't part of a comment-start, it and the character after it
were none the less stepped over. If the character after started an
enclosure, this would duly be missed, leading to mis-parsing of the
subsequent text. As for similar bug recently fixed in findDeps().
Change-Id: Ie5329ec633c23a554b42a6351723c980e27fb9a9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This extends the test suite introduced in 497f0af1f7 for
a known-to-be-good case also for 32 bit systems.
Change-Id: Ia231bcb9b0102c28483d932be18767662b7a6afd
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Previously, the geometry stored for floating dock widgets
in QPlaceHolderItem::topLevelRect and QDockAreaLayoutInfo::saveState()
included the window frame (frame position/content area size).
This does not work in the case where a floating dock widget is deleted
since the geometry is determined after reparenting the widget when the
frame geometry is no longer available. Change the behavior to store
the geometry excluding frame to avoid such problems and adapt
QDockWidgetPrivate::setWindowState() accordingly.
Task-number: QTBUG-49832
Task-number: QTBUG-45780
Change-Id: I84b5c80df6e1c9e738bbb1407b9047cc84719ce0
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This test is marked as blacklisted on 10.10, and it
is found to still fail in 10.11.
Task-number: QTBUG-49834
Change-Id: Ibddb1af6b61f3fca2b2aea18102bbaa5390a40d3
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The C preprocessor allows backslash-newline anywhere and allows
comments anywhere it allows space. Testing wilfully perverse
applications of that revealed qmake's parsing of #include directives
wasn't very robust. So rework to actually follow the rules and add
those tests.
Change-Id: If5cc7bfb65f9994e9ab9ed216dd1ee7285c63934
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This reverts commit 9a6a58a95a,
which was a work-around for a qmake bug, now fixed.
Task-number: QTBUG-19393
Change-Id: Id467bb5907a88f03eac0e29a90f4ff7e97045423
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
TEST_HELPER_INSTALLS cannot be used on platforms with no
QProcess support.
Change-Id: I2a6a283d94ca4487fc628449c53fc37140dd291d
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
This is used throughout Qt and resolves to
operator op(QChar, QChar)
This test makes sure we don't break those
use-cases as we fix missing relational
operators as found by tst_QStringBinOps.
In the other direction, 0 op QChar is
ambiguous, due to op(const char*, QString)
etc, so only test the uint op QChar case.
Change-Id: Ifae7fb65bf3269583898cfea3fc6c95547c75122
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Since special files have file size == -1, they were always filtered
out by QFileSystemModel, even when passing QDir::System as filtering
option. Keep them instead.
The testcase is more convoluted than it should be because QFSM
is so broken that it returns valid indexes for invisible elements
in the model (such as filtered out elements).
Change-Id: I023a9813dbfeed7be99dded42c66b1191afdc17e
Task-number: QTBUG-20968
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The test was comparing an "unsorted" file listing read from disk
with a reference listing, checking whether the two were different.
Obviously that's a nonsense test, as there's no stable order
for the entries returned by readdir_r and friends.
Change-Id: I1d781a6513c42bb0b585d02e57a771c5336c7df4
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
I still have no idea how to fix this properly given the absolute mess
of QWidgetLineControl. For now add a failing test.
Change-Id: Ieb5ad6994c8ce7deb0cd0f2f47d51073d042244e
Task-number: QTBUG-49295
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The parser in QMakeSourceFileInfo::findDeps() would step over the
closing quote of a string, only to have a for loop then step over the
character just after that closing quote, which was thus never studied;
this could lead to problems in various ways. Fixed that and expanded
findDeps() test to catch regressions.
Task-number: QTBUG-17533
Change-Id: I7dec5222e38fa188495b39376ffee70bc7bbc87f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It makes little sense to give focus to a hidden widget; in order
to make the treeview visible, we need to set the view mode to Detail.
Change-Id: I453111e83593a790a656651b603a9c9b1a78dd9d
Task-number: QTBUG-7690
Reviewed-by: Jan Blumschein <jan@jan-blumschein.de>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
... otherwise we would not detect subsequent file/directories added
into the non-removed one.
Change-Id: I43018dfb9a9c6c0399190800da3f0d572ec5d8d8
Task-number: QTBUG-49307
Reviewed-by: David Faure <david.faure@kdab.com>
[ChangeLog][QtCore][QProcess] Added method
setCreateProcessArgumentsModifier to QProcess on Windows to enable
users to intercept and modify CreateProcess parameters.
With such a modifier, calling code can decide whether to inherit
handles, modify the STARTUPINFO struct, and pass its own
combination of process flags to CreateProcess.
Task-number: QTBUG-390
Task-number: QTBUG-6917
Task-number: QTBUG-9350
Task-number: QTBUG-24619
Change-Id: I14757dbbacfebb1c89f52402d36fba0ba9c45f3a
Reviewed-by: Björn Breitmeyer <bjoern.breitmeyer@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Move some code (like registrations of meta types) from init() to
initTestCase() in the process.
Change-Id: I57db5156647cfadab554fbed853b2e68b2815f3b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
When a QLineEdit is readonly there's a discrepancy between key press
events and shortcut override events. For instance, presses Ctrl+C
copies the text unless there's also a shortcut for the same key sequence.
In this case, the shortcut override event is not handled, and no text
is copied. Fix it by splitting the handling of shortcut override
events between "read only" access (copy, select, etc.), which still
makes sense on a read only line edit, and write access (paste, ...)
which doesn't.
[ChangeLog][Important Behavior Changes][QLineEdit] QLineEdit will
now accept certain shortcut override events even if it is read only.
Change-Id: Ie5b048259b99a1eff0581129e3ad97f27a88fe86
Task-number: QTBUG-21217
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
The documentation says that we scroll one pixel, but changing the
behavior in 934f062203 to do that
was not well received.
People were relying on the undocumented behavior - and the new behavior
was considered to be a regression. (Nobody called setSingleStep since
Qt in many cases provide a reasonable singleStep - which implied that their
programs scrolled with 1 pixel which was quite slow). Furthermore getting
the old behavior (auto set of single step) was nearly impossible.
However the revert (done in 0e69230d02)
gets us back to QScrollbar::setSingleStep not working in pixel scroll mode
(even without it being documented - but we should also have a working API
rather than documenting that it is not working)
The previous approach was directly prevented Qt from changing
single step (on e.g resize) at all. This patch only prevents Qt from
changing when a user explicitly has called the function
QScrollBar::setSingleStep (in pixel scroll mode).
That is we expect that calls to setSingleStep means that the user actually
wants to set the singleStep and doesn't want Qt to control that value.
Furthermore it is possible to switch back to the automatically adjusted
singlestep with QScrollBar::setSingleStep(-1).
[ChangeLog][QtWidgets][QAbstractItemView] QTBUG-7232 - In ItemViews
when scrollMode is set to scrollPerPixel, it is now possible to
change the single step. Qt will automatically adjust the single step
until setSingleStep is called. When setSingleStep is called it will
however respect the set and stop doing automatic changes of the value.
Calling setSingleStep(-1) will switch mode back to automatic adjust.
Task-number: QTBUG-7232
Change-Id: Ibfe0caa9751d3bcc11bfc6e0654a3d1ac35ac8ae
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Replace hide() call (present in itemViewKeyboardEvent since Qt 4.5)
by reject(). Add signal spy to existing test function.
QDialog doc states that reject() will always be called on Key_Escape.
hide() is not enough: it makes exec() terminate and return the proper
value, but the signals finished(int) and rejected() will not be sent.
Task-number: QTBUG-7690
Change-Id: Ica4ae2843574478c5b9a7672f871f3ef3f16f3c9
Done-with: Jan Blumschein <jan@jan-blumschein.de>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
If the LHS is detached and has existing capacity that is large
enough to hold the RHS, re-use the memory instead of allocating
a new buffer and throwing away the old.
Change-Id: I53d42825da92c264c7301e8e771cba9fb35c321b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][State Machine] Added constructor overload that
takes a pointer-to-member for the QSignalTransition.
Change-Id: I80ac6e16d0edf7d2ab09882b6f6db4cbd73364e1
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Can't sensibly test unless the compiler does support raw strings,
since any test that would catch qmake's (prior) inability to parse raw
strings would necessarily confuse the C++ compiler in the same way.
This even applies (in test app code) to any #if-ery around the raw
string, since tokenization happens before preprocessor directives are
resolved. So the #if-ery on Q_COMPILER_RAW_STRINGS has to be in
tst_qmake.cpp, not the test app it builds.
Change-Id: I4a461f515adff288b54fb273fd9996f9b906d11c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Commit 64a1448d87 (Qt 5.2) caused
QNetworkInterface to report address labels (a.k.a. interface aliases) as
separate interfaces. This is caused by the fact that glibc, uClibc and
MUSL copy the address label (netlink address attribute IFA_LABEL) to the
ifa_name field, which made QNetworkInterfaceManager think that it was an
interface it hadn't yet seen.
Address labels are the old way to add more than one IP address to an
interface on Linux, for example:
ifconfig eth0:1 192.0.2.2
Those do not create a new interface, so the "eth0:1" label maps to the
same interface index as the parent interface. This has been deprecated
for 10 years, but there are still tools out there that add addresses in
this manner.
This commit restores behavior compatibility with Qt 4.2-5.1. The Qt
5.2-5.5 behavior is incorrect because it reports more than one interface
with the same index. On systems configured like the above, the
tst_QNetworkInterface::interfaceFromXXX test was failing.
Change-Id: I8de47ed6c7be4847b99bffff141c2d9de8cf7329
Reviewed-by: Richard J. Moore <rich@kde.org>
It should compile, since the std::shared_ptr does.
[ChangeLog][QtCore][QSharedPointer] Fixed a problem that would cause a
compilation error when constructing a QSharedPointer of a const type
when the type derives from QEnableSharedFromThis.
Task-number: QTBUG-49748
Change-Id: I8de47ed6c7be4847b99bffff141c84f5e0b6bea8
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
In a QPair, the member names {first, second} have no semantic
value. A simple struct, while not as featureful as QPair, can
be given meaningful member names, {rect, index}, in this case.
Change-Id: If1e289ecee82a1cb020ac3a854efd2ec1096493b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
QColor always uses unpremultiplied alpha, but the new QImage methods
were based on the QRgb versions which might be either. This patches fixes
the two new methods so they treat QColor alpha correctly.
Change-Id: I78a5b875ad4e78ad7fde3b811c6187482b4f6d15
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Introduce QVERIFY2() to get some information when exactly it fails.
Change-Id: Icaddf2ecae434d0bafc90c18458c5ee067dfd506
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
This follows up 130c2baa93.
Change-Id: I2f6c9b4f995af427cec9a2162b782039debf8564
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Only add C++14 to the project configuration when C++14 support is
available on the platform. Adding it because the platform supports
C++11 doesn't work when the platform _only_ supports C++11 (e.g.,
QNX 6.6.0).
Task-number: QTBUG-49491
Change-Id: I15de38bb06d912a314b9dd18c80b513cc06a855e
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use SW_SHOWNORMAL instead SW_SHOWNOACTIVATE as a parameter to
ShowWindow() to enforce the window to be restored to normal state,
even if the state before minimized was maximized.
Task-number: QTBUG-48449
Change-Id: I9436623b1495f574a72050e50e8b31bfc83ced5c
Reviewed-by: Andy Shaw <andy.shaw@theqtcompany.com>
The old code was extremely inefficient, and QCollator
can provide the same functionality in a much better
and faster way.
Task-number: QTBUG-30902
Change-Id: Iaf5dbe587d9a6ebca26885259fdee74a29d3c84f
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
QVariant was using QColor::name() to convert a color to string, which by
default loses alpha value. The patch is fixing the problem by always
including the alpha value in the string when required.
[ChangeLog][Core][Variant] QVariant(QColor)::toString() uses
QColor::HexArgb format when the alpha component is different from 1.
Task-number: QTBUG-37851
Change-Id: I887460c1ea151180ba99d64dd873ba9d6e2268f2
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
In QMenuPrivate::hideMenu(), delay clearing of 'causedPopup.widget'
to after the QMenu::close() call, so that it is still accessible
in QMenu::hideEvent() which calls QMenuBarPrivate::setCurrentAction(0)
if the caused widget is a QMenuBar.
Task-number: QTBUG-47377
Task-number: QTBUG-49592
Change-Id: Idbda48e918dae799afea84068a60d7383d7b4971
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The platform window geometry can be misleading until it has
been properly positioned and
QWindowPrivate::resizeEventPending has been cleared.
Task-number: QTBUG-49588
Task-number: QTBUG-48396
Change-Id: Ie065f62478fc8522a9ad51391bb897510afa5aad
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Remove unused ctors and dtor, add Q_OBJECT, indent,
privatize slots, don't check for nullptr before
delete'ing a pointer, and add one override keyword.
Setting test_box (a QPointer) to nullptr is already
done by the variable's default ctor.
Change-Id: I13f06dc8104ef1c0ac08a25c960641c076f10499
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Replace hardcoded interval by QTRY_COMPARE() ensuring that all tasks have
finished, since otherwise QThreadPool::tryStart() fails in the next run.
Remove blacklisting for MSVC2012 since it is not compiler-specific.
Task-number: QTBUG-49654
Change-Id: If49b6eb9ef4da4ba2911839166c397d84c175e00
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Ensure the test works in a working directory with read-only
permission and that the file names are unique.
The test can then be executed repeatedly by COIN even in case
left-over hanging process helpers still lock the files. Also
disambiguate the "data" files used by various tests.
Task-number: QTBUG-47370
Change-Id: I3b9c7b70828da78f400196fcbba27bc61ea4538f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Introduce constants and make the interval for the 2nd thread a bit
longer.
Task-number: QTBUG-49653
Change-Id: I92ac0494ec6c9af5bde858007d08e26210215434
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Introduce a base class for the threads that ensures termination in the
destructor to ensure all QThreads instantiated on the stack are terminated.
This should reduce crashes since the test thread classes have pointers
to stack variables of the test slots.
Set object names on the threads for better diagnostics.
Decouple wakeOne()/wakeAll() that impact each other via the static count
variables of the thread class by introducing a base class WakeThreadBase
keeping a pointer to an QAtomicInt count variable on the stack instead
(similar to the existing pointers to the mutexes, etc).
Task-number: QTBUG-49653
Change-Id: I73537386bf36019efa81e8e24ba9af92506f7794
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
It was used to verify waitForFinished() and printed QProcess::errorString()
on failure, which is misleading, since the process is not
in an error state - it is still running. Example:
QWARN : tst_QProcess::setStandardOutputFileAndWaitForBytesWritten() QProcess error: 5: Unknown error
FAIL! : tst_QProcess::setStandardOutputFileAndWaitForBytesWritten() 'ret' returned FALSE. ()
Use a plain QVERIFY instead.
Task-number: QTBUG-47370
Change-Id: Iacfa6e1a5ffd2be4e1257a27a400ccc59671e8c8
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Silence warning:
Don't know how to handle 'hint', use qRegisterMetaType to register it.
Task-number: QTBUG-49623
Change-Id: Iec0a823c7af87eddd9a3f126a1b970da1ff2f03f
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
On Windows, the wrong value was used to calculate the
design-to-device scale. The assumption has been that tmHeight
in the TEXTMETRIC is the pixel size of the em square, but
it is not, it's the height of the font (ascent + descent).
The pixel size of the font is defined to be the em square size
in pixels.
On OS X, the kerning data was never actually read from the
font. I've added a lazy initialization for this similar to
the one in the FT engine.
This was discovered when investigating QTBUG-48546, as it turned
out that the kerning information extracted by Qt in this case was
different from the one used by Harfbuzz.
I've changed testfont.ttf to kern "_2" so that the digit is positioned
directly on top of the underscore and constructed a test.
[ChangeLog][QRawFont] Fixed kerning on advances in QRawFont for
OS X and Windows.
Change-Id: Ic9a321ad119ea880cef89b861c75a820ab8d3182
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Move the code from cleanup() into a separate cleanupTestData()
and call this from initTestData() and cleanup(). Remove slot init().
Change-Id: I4e7b5b89197ed0aa50f46f730e9c1d9c59749614
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Use a QTemporaryFile in readFromFileAfterJunk() instead writing
to the current directory which might not have write permission.
Enclose each call to QFile::open() in QVERIFY2() with error message.
Change-Id: I3c5da31c6681a2396cee473cafe7d92c5c220de3
Reviewed-by: aavit <eirik.aavitsland@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Create a temporary directory instead of writing to the
test data directory or home path (Android).
Change-Id: I6af583e5da91eefb603eaae179e7d789487dc626
Reviewed-by: aavit <eirik.aavitsland@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
VS2010 is not supported in Qt5.7+
Task-number: QTBUG-31611
Change-Id: I4b2bd703f6462e6f0a4de9e75bca8316b8707680
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Ubuntu 10.04 is not supported anyways in Qt 5.7+
Task-number: QTBUG-25293
Change-Id: I6420f76b12835aca268455341b46be61e9a2b143
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The EcmaScript format for printing doubles in exponent form differs
from Qt's format only in this aspect. EcmaScript explicitly prohibits
leading zeroes in exponents. It is thus worthwhile to add those flags
in order to be able to generate and parse doubles in compliance with
EcmaScript.
[ChangeLog][QtCore][QLocale] Additional flags in QLocale::NumberOption
allow generating and parsing doubles in EcmaScript compliant format.
Change-Id: Ia7b82c2e67bb8b80bd890014ff5cd4563faf2a03
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Also use this for converting doubles with QVariant. We generally want
exact results there, rather than adding rounding errors whenever we
convert.
[ChangeLog][QtCore][QLocale] Added special value for double conversion
precision to get shortest accurate representation.
Change-Id: I905b8a103f39adf31d24b6ce2c8a283cf271b597
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Check that we can use std::forward, and that the compiler
synthesizes move special member functions when it should.
MSVC only supports the latter since the Nov 2013 CTP,
which, for our intents and purposes, means VC2015.
Change-Id: I8d8e4ae064abce90076a05b3b637950ab7d21dac
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The platform is no longer supported or actively maintained, and is
in the way for improvements to the Unix event dispatcher and QProcess
implementations.
Change-Id: I3935488ca12e2139ea5f46068d7665a453e20526
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
QString::asprintf() has the ability to take a ushort* array as
obtained from QString::utf16() and insert that into the output
with an %ls conversion.
But no-one ever used this, because just passing QString::utf16()
to QString::asprintf() creates a warning about wchar_t* expected,
but ushort* provided.
The new qUtf16Printable() macro adds the necessary casts (via void*
to prevent any "type-punned pointer" warnings) to make
passing QString::utf16() to QString::asprintf() work silently.
This should greatly reduce the need to do a round-trip via utf-8
just to print the contents of a QString.
[ChangeLog][QtCore] Added qUtf16Printable().
Change-Id: I7ddd8d2b2a2191c9faa26aca95d49850d94b287c
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Check that it works on C arrays, with auto type deduction
and with types that only provide free begin()/end()
functions that can only be found through ADL.
Change-Id: I760722a0f56c9ebe967070ff68af90b96ed77e66
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
A loop to skip space and comments was meant to break on anything else
but would have not broken on a division operator (where it should) due
to it getting caught in the check for a comment-start, without falling
back suitably when it didn't complete that check.
Managed to contrive a suitably twisted change to findDeps test to
reveal the bug; broken previously, now fixed. Not ideal, as it relied
on another bug to fail previously - backslash-newline shouldn't end a
preprocessing directive line - but it should still pass once that's
fixed, too. Exercising a bug in qmake usually involves code that
won't compile anyway, making it tricky to write a test that reveals
the bug but that passes once it's fixed.
Change-Id: I08a1d7cc5e3d7fd1ac0a48e5c09dfdfbb7580b11
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
... at the cost of a bunch of warnings about
ushort*/wchar_t*.
It wasn't checked at all, which isn't really a solution,
either.
Split off the %s checks into a separate function, which
makes obvious the sorry state of sprintf non-%s, non-%d
testing that's left.
Change-Id: I6312f984bacfb568b609e34b5218b3ab9a9765c4
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
In C++, signed overflow math is Undefined Behavior. However, many CPUs
do implement some way to check for overflow. Some compilers expose
intrinsics to use this functionality. If the no intrinsic is exposed,
overflow checking can be done by widening the result type and "manually"
checking for overflow. Or, for X86, by using inline assembly to use the
CPU features.
Used in QtQml.
Change-Id: I2ef2523ccaa98f6757a45e24862a2fa730a26bb0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Currently QOpenGLWidget and QQuickWidget do not support having native
child widgets inside the same top-level window. In some cases this is
inevitable, f.ex. multimedia may require native windows when used from
widget apps. winId() calls made for various (valid or invalid) reasons
are also problematic.
There are no blockers for supporting this setup, however. By storing
multiple texture lists (one for each subtree where the root is a
native widget), adding the missing markDirtyOnScreen calls, letting
each native widget access the correct texture list (i.e. the one
corresponding to its children) when they are (separately) flushed, and
fixing composeAndFlush() to take the update region and the (native
child) offset into account, it can all be made functional.
The change also fixes the issue of keeping GL-based compositing
enabled even after all render-to-texture widgets in the window become
hidden. Due to the changes of how such widgets are gathered,
composeAndFlush() is not invoked anymore when no such widgets are
discovered for a given native parent. This is great since having
compositing enabled infinitely is an issue for applications like Qt
Creator that implement certain views with QQuickWidgets but cannot
afford the cost of texture uploads in other places (e.g. for the text
editor) on slower machines.
The openglwidget manual test is greatly enhanced to test various
situations (MDI, scroll areas, tab widgets, QOpenGLWidget as native
child, QOpenGLWidget with non-tlw native parent, etc.)
Task-number: QTBUG-48130
Task-number: QTBUG-49172
Change-Id: Iad098359c8bcf749f01c050da0853415e1550eda
Reviewed-by: Paul Olav Tvete <paul.tvete@theqtcompany.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
The ppm decoder used a fixed size buffer to discard comment lines,
which would fail for comments longer than 100 characters.
Task-number: QTBUG-49414
Change-Id: I92e910e025cf7584a6ff1c0e5b0e8a4ab281d479
Reviewed-by: Liang Qi <liang.qi@theqtcompany.com>
Call begin/endResetModel() in QSqlQueryModel and all
derived classes.
Task-number: QTBUG-49404
Change-Id: I11492d6386efb4c945c246a6379aaa6ca4502a25
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
When that happens, we need to detach (in-place conversion won't work),
so we recurse back into the same function, but the template version that
does detaching.
Task-number: QTBUG-49181
Change-Id: Idba8c29717f34c70a58fffff1412fea3acc95f98
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Extend the current BLACKLIST to cover all all Windows versions
and add watchFileAndItsDirectory:native backend-testfile.
Task-number: QTBUG-30943
Change-Id: Ic58c090f23d3584843bc1e74eba533d75c530ad3
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
The file exists and it's listed in json.qrc (for Android) but it isn't
listed in TESTDATA. This is only a problem when the target is a another
system as is the case with Qt for QNX. One of the tests fails because
the file isn't deployed.
Noticed this while testing the changes for custom spacing of JSON
output.
Task-number: QTBUG-47437
Change-Id: I627592a5a225f50fdb8e3cdd6ac72dff43936ae5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Apple changed some enums in the 10.11 SDK from being just:
enum { ... }; typedef uint64_t Foo;
to:
typedef CF_ENUM(uint64_t, Foo) { ... };
which in C++11 mode expands to:
typedef enum Foo : uint64_t Foo; enum Foo : uint64_t { ... };
The use of strongly typed enums means we need to explicitly cast from
int in the places where we know what we are doing.
Change-Id: I7c8cfdbc0549471a3292de14d8b766fe17133e25
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
This is due to the Gtk style in use. It is already blacklisted for
Ubuntu and in Qt 5.7 we'll use Gtk 3, so there is no reason to invest
into fixing this.
The test used to pass because we would build with -no-gtkstyle.
Change-Id: I1cf26301ba8b19be9a995837b0b5984838ec777a
Reviewed-by: J-P Nurmi <jpnurmi@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
tst_qmenubar::taskQTBUG4965_escapeEaten
tst_qtabbar::sizeHints
These tests will not pass when Gtk style is enabled, similar to the Ubuntu
blacklisting.
Change-Id: I590d84fb7ce0df28d0e8525e0f04b676280a12ff
Reviewed-by: J-P Nurmi <jpnurmi@theqtcompany.com>
The test is new and something seems to go wrong on the Ubuntu test
machines.
Since it ends up failing a lot, blacklist it for the time being.
Task-number: QTBUG-49388
Change-Id: I06de7ba15aaee68351a747e3a06c0150018b39de
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Test that stepping into the missing hour lands us somewhere sane.
Check that raw instance and product of .toLocalTime() agree.
Task-number: QTBUG-49008
Change-Id: I430382ae223bcb43b151d2d6054ecbdd7edc8a47
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is follow-up for QTabBar fix ea47d152b3.
In native OS X applications using mouse wheel on combo boxes have absolutely no
effect. We should bring the same behavior to Qt based OS X apps too, as users
are complaining of unexpected behavior, eg. randomly switching Qt Creator
sidebar mode when scrolling file list and moving mouse pointer little bit
above. Moreover inertial mouse behavior on OS X makes combo box usually move
several indexes, rather than single one on slight finger slide.
This also applies to iOS apps so the change affects all Apple platforms.
Task-number: QTBUG-10707
Change-Id: I6582265039198707ad8c2f54de96ee2a0b0e0b47
Reviewed-by: Adam Strzelecki <ono@java.pl>
Reviewed-by: Jake Petroules <jake.petroules@theqtcompany.com>
Otherwise write() for my python (OS X 2.7) wants strings, which is incorrect.
Change-Id: Ibd9d050646d1039ba8370d121dd25756ceffdb7a
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
As these are strongly typed, they won't implicitly convert to int, so make sure
to cast explicitly.
Change-Id: Ic8daa31c528bbd8f399ab401d0963e13db191312
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
warning: 'typemsg1' may be used uninitialized in this function [-Wmaybe-uninitialized]
Change-Id: Ie68d279eccb003a2ca5a0116eea336cbc8776660
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Introduce class ExecCloseHelper which runs a timer
timer checking for the test candidate to become
the active modal window and closing it either
by key event or calling close.
The test then runs in 4s as opposed to 45s before.
Task-number: QTBUG-38890
Change-Id: I610fb09e6b8269d218cddc8d11abae2bd3317f9d
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
A QAbstractSocket can be close()'d at any time, independently of its
current connection state. being closed means that we cannot use it to
read or write data, but internally it might still have some data to
send or receive, for example to an http server. We can even get a
connected() signal after close()'ing the socket.
We need to catch this condition and mark any pending data not yet
written to the socket for resending.
(cherry picked from commit 0df5d07929)
Task-number: QTBUG-48326
Change-Id: I67d9ad36f7288c9c6bef51aa6253d7b187737601
Reviewed-by: Ulf Hermann <ulf.hermann@theqtcompany.com>
Reviewed-by: Markus Goetz (Woboq GmbH) <markus@woboq.com>
* Georgian lari currency symbol
* A large collection of CJK unified ideographs
* Emoji symbols and symbol modifiers
* Letters to support the Ik language in Uganda, Kulango in
the Côte d’Ivoire, and other languages of Africa
* A set of lowercase Cherokee syllables, forming case pairs
with the existing Cherokee characters
* The Ahom script for support of the Tai Ahom language in India
* Arabic letters to support Arwi—the Tamil language written in the Arabic script
For more details, see http://www.unicode.org/versions/Unicode8.0.0/
[ChangeLog][QtCore] Unicode data updated to v.8.0
Change-Id: If255f95c9c45655b721369a116299da3cabbba0a
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The behavior from before libdouble-conversion is that in case of an
overflow the OK flag is set to false, but the returned number is still
infinity, rather than 0. Also, the number of processed characters is
always set to the number of characters actually processed, unless
garbage is found.
There is an important distinction between an overflow and garbage. The
client code may accept overflows and infinity may be a valid result.
Garbage is most certainly not acceptable. Having an infinity/false result
in addition to 0/false allows the client code to distinguish those.
One application where this is useful is parsing JavaScript.
Change-Id: I4b8581568144b44fca3353c4bd9685c702762af9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A dialog embedded into QGraphicsView has Qt::WA_DontShowOnScreen set
(similar to a native dialog). It must not trigger the modal handling
though as not to lock up.
Task-number: QTBUG-49124
Change-Id: I22ce3f18d01df017b9317666770686bd4491387f
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
When rebuilding the tab bar after hiding several dock widgets,
the index gets offset.
Task-number: QTBUG-49045
Change-Id: I05f6a976ca1d8c6f7cdf6532f1a728483398eabc
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
On some platforms our 1200 x 1000 bytes seems to be not enough to
fill kernel buffers (socket write). But it's not a reason to fail test,
just skip it.
Task-number:QTBUG-49205
Change-Id: I13ea6f315f9318288ba054cf8bfa6cdd61e489d2
Reviewed-by: Richard J. Moore <rich@kde.org>
This test keeps on failing on Windows 8 with 32 bit.
Let's add the platform despite this one test failing.
Change-Id: Id6a2b3e0b587d3cff29d1f616d5edacfcf68746d
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
This also fixes the underlying cause of QTBUG-44039 and QTBUG-43885.
You can choose between system, qt, and no libdouble-conversion
support. If you choose "no", snprintf_l and sscanf_l will be
used.
By default, system double conversion is used if the system provides a
double-conversion library. Otherwise the bundled libdouble-conversion
is built. sscanf_l and snprintf_l are not used by default as the
planned "shortest" conversion mode to produce the shortest possible
string will give less precise results when implemented with snprintf_l.
Change-Id: I8ca08a0fca5c54cf7009e48e771385614f6aa031
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
After canceling the asynchronous read operation, the
notified() slot receives ERROR_OPERATION_ABORTED.
We must not handle this situation as an error.
This amends commit 5ce567c5.
Task-number: QTBUG-48336
Change-Id: Iff948ceb3ad1f805a9de8c188fbc39ed4c76ba82
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
If the future is finished when a watcher starts watching it, it is
perfectly reasonable for the watcher to get the finished message
promptly. If you pause the watcher before any message loops get to
run, the message presently won't get through until the watcher is
resumed, but there is no reason to guarantee that; indeed, one could
consider it somewhat perverse behavior.
So move the reportFinished() calls to after the pause()s.
Also eliminate a used-once local variable and use QTRY_VERIFY() in one
place where qWait() was used before.
Change-Id: I4bc6091fd7437a4d341be511b7a140f3d72d850e
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Attaching spies afterwards was provoking a warning during tests:
QFutureWatcher::connect: connecting after calling setFuture() is likely to produce race
Change-Id: I6ee8c3613cecebd1c69b0337139d8a19a33f4a11
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Different multicast tests fail on different platforms for different reasons.
Blacklist them to get rid of insignificant and later fix/un-blacklist.
Change-Id: I91548366c7666478ea1cc446bbf337becfdefd49
Task-number: QTBUG-46612
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
The previous implementations did not check the full mantissa. The result
was that certain NaN values were seen as +/-Infinity.
A nice benefit is that the generated code for this implementation is also
faster.
Task-number: QTBUG-47692
Change-Id: I1507ec579ccd9a2ab97da8cf83dabbc5d6e28597
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
We want to be sure that the conversions are independent of the current
locale set by setlocale(3) and we want to test both directions of the
conversion.
Change-Id: I01be19e680588478d07fd65a48796e806e681863
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
As a follow-up for 5c1b9bbdf1 disable the
test on all platforms, since it fails on newer openssl. This was now
also happening on Windows, so until a fix is there, skip the test.
Change-Id: I6c8822c0ac5411b1114e9cd426219574ab1c9b54
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Some of the examples make no sense without bearer management and
QNetworkSession is not defined if QT_NO_BEARERMANAGEMENT, so
tst_qnetworkreply.cpp has to be adjusted.
Change-Id: Ic2f73746cba74f670ae5b5e99b0be1461ff6d182
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Skip the correct number of bytes in the read buffer when expanding '\n'
into "\r\n" upon writing.
Change-Id: I5b01fc47c330dee5c83001abf0acd7d63d790b96
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This may result in incrementing an invalid iterator after the
iterator's container has changed. Also, for this to happen,
the view needs to have an active editor.
The reentrant call happens as follows in QTreeView, after the
model adds new rows to the view:
QTreeView::rowsInserted()
QAbstractItemView::rowsInserted()
QAbstractItemView::updateEditorGeometries()
QTreeView::visualRect()
QAbstractItemViewPrivate::executePostedLayout()
QTreeView::doItemsLayout()
QAbstractItemView::doItemsLayout()
QTreeView::updateGeometries()
QAbstractItemView::updateGeometries()
QAbstractItemView::updateEditorGeometries()
Other concrete item view classes may be prone to the same issue.
The fix consists in relayouting the items if needed, which should
trigger calling updateEditorGeometries() again. This doesn't
invalidate previous optimizations regarding item relayouting since
we only force relayouting when it'll be done by visualRect().
Change-Id: Id31507fdc8d9a84d50265298191d690d1a06792b
Task-number: QTBUG-48968
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Tests that window creation order doesn't affect the resulting geometry
of the parent and child windows.
Change-Id: Iff0cb5adf87107dfed4a633a67e1b4312b90e24a
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
When a child QWindow is shown by calling setVisible(true), we don't need to
create the platform window immediately if the parent window hasn't been
created yet.
We defer creation until the parent is created, or we're re-parented into
a created parent or made top level.
This optimization is more important now that we create the full parent
hierarchy once we decide that we need to create a child QWindow.
Change-Id: Ia4f0430f0d3709a12f41f6473c1cea6b0ef3c9cd
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
If the QWindow has been created and has a platform window, we need to
ensure that the windows in the parent hierarchy also are created before
we set a new parent on the platform window, otherwise the platform window
will think that it's a top level window.
Change-Id: Icb2c3cd5411cd1eb595e8673e144095feda31df9
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
To be able to create a platform window for a given QWindow we need to
sync up the parent hierarchy first, so that the newly created window
can be placed into that hierarchy.
Without creating the parent hierarchy first, the QPlatformWindow will
end up thinking it's a top level window, when in reality is represents
the platform backing of a child QWindow.
Change-Id: I2cad7759fbc118b04718e7a27ec7570ce1238757
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
This test hasn't been run for years, so clean up. And besides, it's
extremely fragile and would depend on how IBM packages their OpenGL
libraries.
Change-Id: I1d0f78915b5942aab07cffff140f9db5a09ee7e2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
For Windows CE 7, a QCoreApplication was instantiated
in each test.
Change-Id: Ib579e416e47f884ef0cdf829139518fcc3910b9b
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Compare against isVisibleTo() in QLineEditIconButton::actionEvent()
so that action events received before show() are handled correctly.
Fix a regression introduced by change
4dccb2ca67 for handling action
events causing side widgets to overlap when added before the widget was
shown. Use QAction::isVisible() to determine visibility.
Task-number: QTBUG-48806
Task-number: QTBUG-48899
Task-number: QTBUG-39660
Change-Id: I7a39a3b9a094f2c74cde09544f1158deb2b81cf2
Reviewed-by: David Faure <david.faure@kdab.com>
This was never a documented feature, but happended to work before Qt 5.5.
It broke because the peoperty access went into the static function and are
now prefixed with '_t->'
So restore the behavior as it was by not including the parentheses in the
member name.
Task-number: QTBUG-47695
Change-Id: Ic3509ddea7ac9abc871e71f5bfbe81d04d08e9bc
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
Remove the insignificant_tests CONFIG option in favor of a BLACKLIST
file. The test blacklisted have been found using CI builds logs.
Change-Id: Iac07316862cff9b5085dacdf9f35e691cff09384
Task-number: QTBUG-27571
Reviewed-by: Janne Anttila <janne.anttila@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Use QByteArray/QString addition instead in loops and for
test row names.
Change-Id: Ieffb429efdc14aa5932b3fcdef5a18e13a62d35f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Use QByteArray/QString addition instead in loops and for
test row names.
Change-Id: Iae76d852a1657bfb6d88e84515f30bd2f1dece6b
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
- Avoid duplication of slashes and use static variable for the
const part in settingsPath().
- Do not run expensive cleanup twice in init()/cleanup() as was
before by moving the code into a separate cleanupTestData()
function called from cleanup() and initTestCase().
- Use QDir::removeRecursively() (which should be able to deal
with readonly files, etc after 26bcc0565f )
instead of system calls or the special removePath() function for
CE/RT.
- Switch QStandardPaths into test mode.
Change-Id: Idcde2d17020eae1ea43e448266e3940c06f174ef
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
QLatin1String wasn't really tested except as a drive-by.
Unearthed a discrepancy with docs. Fixed the docs.
Change-Id: I1246bb33888132edbc4e22da792a480a156357bf
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Use QByteArray/QString addition instead in loops and for
test row names.
Change-Id: Ia067cd966bf13506e6ca19925eae3158da027b83
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Use QByteArray/QString addition instead in loops and for
test row names.
Change-Id: I7974ace5b34f2da43e7511044e80de1e733245ac
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Check whether the action under the mouse is enabled before closing.
Task-number: QTBUG-48493
Change-Id: I2a0669840b9b6c81dacdf179325301c02f1c0c35
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
The delegate may be null in QHeaderView.
Task-number: QTBUG-48543
Change-Id: I4d3ba104b0b57431e8765271dc2dc880be096672
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Use QByteArray/QString addition instead in loops and for
test row names.
Change-Id: I31adb60bdaf7ea243143a9244b6c4f66f38b189d
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Numbers formatted in the C locale should not use group
separators by default.
[ChangeLog][QtCore][QLocale] The C locale does not use group separators
when formatting numbers any more.
Task-number: QTBUG-4044
Task-number: QTBUG-3068
Change-Id: Ia647a72efc11fecd66d22f9253562b1d4ef58168
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If a macro is used with too few parameters, complaining about its
definition using '#' followed by something other than a macro
parameter name is apt to be confusing - reading the definition will
reveal that the name in fact is a macro parameter after all. The
reader needs attention directed to the invocation, not the definition.
Split the test in two: one to test the prior error message does in
fact get produced for an invalid macro definition, the other to test
the invalid invocation case.
Task-number: QTBUG-46210
Change-Id: Ie177a56d346e553bf9d67e2008a4352633afa1ae
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
It simply is missing. We could wait for QStringView to come around, but
I need this function in uic _now_, so let's add it.
[ChangeLog][QtCore][QTextStream] Can now stream QStringRef without converting
to a QString first.
Change-Id: Idd178e0ba8a89c025f4533d46de912cbdb3883d5
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
These are for faster lookups between ID and name when one doesn't need
the full information set about the interface.
Change-Id: I7de033f80b0e4431b7f1ffff13f98d448a705c3e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Prefer QCOMPARE over QVERIFY for equality and use QLatin1String().
Change-Id: If226a0fc7b25be3e6774c7e36ca1e6f99234e5dd
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Use character literals where applicable.
Change-Id: I1a026c320079ee5ca6f70be835d5a541deee2dd1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Now all Qt sequential containers consistently provide reverse iterators.
The associative ones, by way of not returning std::pair from op*, can't
just use std::reverse_iterator. They would miss .key() and .value() methods.
So that has to wait for 5.7.
The reverse versions of the new key_iterators can also just use
std::reverse_iterator, but I'm afraid that after bikeshedding over
keyRBegin() vs. rKeyBegin() vs. reverseKeyBegin() vs. rkbegin()
vs. krbegin() (<-- of course, what else?), it would anyway be too
late for 5.6, so defer, too.
[ChangeLog][QtCore][QLinkedList/QSet] Added rbegin(), crbegin(), rend(), crend(),
and reverse_iterator and const_reverse_iterator typedefs.
Task-number: QTBUG-25919
Change-Id: I58316fffade469e9a42c61d7aa1455ae3443fd94
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
A QAbstractSocket can be close()'d at any time, independently of its
current connection state. being closed means that we cannot use it to
read or write data, but internally it might still have some data to
send or receive, for example to an http server. We can even get a
connected() signal after close()'ing the socket.
We need to catch this condition and mark any pending data not yet
written to the socket for resending.
Task-number: QTBUG-48326
Change-Id: I6f61c35f2c567f2a138f8cfe9ade7fd1ec039be6
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Previously, only QXmlTestLogger had timers to take elapsed times
and log them. Move those into class QTestLog for access by
the loggers and output the times in the crash dump to make it
easier to spot hangs/recursion crashes.
Produces:
QFATAL : foo() Received signal 11
Function time: 22ms Total time: 23ms
A crash occurred in ...
Function time: 24ms Total time: 26ms
Task-number: QTBUG-47370
Change-Id: Ia530a63104087daffc9a15f68c15d93378b9407e
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Removed the insignificant flag so the rest of the test becomes enforcing.
This test seems to fail only on win32-msvc2010_developer-build_angle_Windows_7
Task-number: QTBUG-31611
Change-Id: Ic4818e50305e1e15eb67b505205436d3fec0ccfb
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
After calling connectToHost(), the socket enters HostLookup state. At this
stage, the socket engine was not created yet, and writing to the socket
should result in either data buffering or an error. So, add a check for
d->socketEngine to prevent a crash on unbuffered sockets.
Task-number: QTBUG-48356
Change-Id: I15ea9ce7de97ce6d7e13e358eca5350745b556bb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
If QTimer::singleShot() is used with a functor callback and a context
object with different thread affinity than the caller, a crash can
occur. If the context object's thread is scheduled before
connecting to QCoreApplication::aboutToQuit(), the timer has a change
to fire and QSingleShotTimer::timerEvent() will delete the
QSingleShotTimer object making the this pointer used in the
connection invalid. This can occur relatively often if an interval
of 0 is used.
Making the moveToThread() call the last thing in the constructor
ensures that the constructor gets to run to completion before the
timer has a chance to fire.
Task-number: QTBUG-48700
Change-Id: Iab73d02933635821b8d1ca1ff3d53e92eca85834
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
