When a window is closed, then it will cause the child windows to be
closed as well as a result. Therefore in order to ensure that they are
shown again as a result, we need to remove the WA_WState_ExplicitShowHide
attribute if the widget was not already hidden before. This enables us to
test for this attribute when calling showChildren(), so that if the
window has a windowHandle then we can make sure that this widget is shown
again.
Fixes: QTBUG-73021
Change-Id: I1186242b889899dfcd38d782a67567348e2055ee
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Cleanup QDataWidgetMapper/QFileIconProvider/ItemEditorFactory autotests:
- use range-based for loops
- use nullptr
- use member initialization
- use new signal/slot syntax
- use static invocations
- use override
Change-Id: I1a36ea2da7de1cfa5d5d4e305ef508fda3a6c460
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
If a transfer timeout is set for QNetworkRequest, downloads
and uploads are aborted if the timeout expires and bytes
haven't been transmitted in either direction.
Task-number: QTBUG-3443
Change-Id: I702d223d673f0c6612343dc9d053815acfcb61b8
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Released on October 4th.
Adds Windows names for two time zones, Qyzylorda and Volgograd.
Added languages Chickasaw (cic), Muscogee (mus) and Silesian (szl).
Norwegian number formatting has flipped back to using colon rather
than dot as time separator; it's flipped back and forth over the last
several CLDR releases. The dot form is present as a variant, the
colon form was long given as the normal pattern, then went away; but
now it's back as a contributed draft and that's what we pick up.
The MS-Win time-zone ID script was iterating a dict, causing random
reshuffling when new entries are added. Fixed that by doing the
critical iteration in sorted order.
Omitted locales ccp_BD and ccp_IN due to QTBUG-69324.
Task-number: QTBUG-79418
Change-Id: I43869ee1810ecc1fe876523947ddcbcddf4e550a
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
While I was looking into a bug related to problems building the test
without GUI, I noticed a lot of spurious #include lines so tidied up a
bit. Split some long lines, while I was about it.
Change-Id: Id87eb6f612c6b174f8240dfe9c00e0929244fb6c
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
Thanks to Dmitriy Purgin for pointing out the serialization one.
Task-number: QTBUG-79353
Change-Id: Ia3d750b17ddd8fbb7a83a55df7e4546ca78c358b
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The qmake config for tst_QString tried to impose QT_NO_CAST_TO_ASCII
on it, but the source file explicitly #undef-s this symbol and its
friends. Leave the define commented out in the .pro so that a comment
can explain why it's no good.
Change-Id: I7620f4e104f0cdab05fdc246b903c40026e63d76
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Test QT_CONFIG(icu) in the code instead of testing qtConfig(icu) in
the profile and setting an extra define just to shadow what's already
defined. Also remove the matching define from qcollator.pro, whose
test code didn't use it.
Noticed while reviewing the conversions to CMake.
Change-Id: I19d3b1026b2a8f50ec424c450614e721500fd38a
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
See the comment in the test for details.
Change-Id: Ie3d356e476ba0419d304bccd396fc18a831a30cd
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
When the first column is hidden or not visible in the current viewport,
it is not possible to deselect the current row.
Fix it by passing the correct column to
QItemSelectionModel::selectedRows() when testing if the current index is
selected.
Fixes: QTBUG-79092
Change-Id: I9d8082d2b29ad2f799156aee910c6ff6e3217771
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
stat() and friends expect a null-terminated C string. There is no way to
generate anything useful from a string that has null bytes in the
middle. It's important to catch this early, as otherwise, for example, a
QDir::exists() on such a path can return true, as the path is silently
truncated.
Extend the checks for empty file names to windows and add checks for null
bytes.
Change-Id: Ie9794c3a7c4fd57f9a66bdbbab8b45a08b6f9170
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
During the creation of a raster paint engine in QImage::paintEngine(),
the QImage will be detached. At least old gcc versions would get
confused so that the newly created paintengine would end up in the old
QImage copy insteads of the newly detached one. Work around by
dropping the temporary engine pointer.
Fixes: QTBUG-79383
Change-Id: I27b1f24312269bc2bcc641dc4334397a92e3bfbb
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The default font on Windows ("Times" is not found) does not have
a ligature for "fi", so the test would not actually be testing
what it was supposed to on this platform, and would pass even
when the code was buggy.
To enable the test on Windows, we select a standard font which
has the ligature (Calibri).
Change-Id: Ic117cd8e549aa729a0cd68006d7c180c6c89c053
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Either by testing for platform name or window activation.
After this gets in, we can enable widget tests in the Wayland bot, which
hopefully will reduce the number of regressions in the Wayland plugin.
Fixes: QTBUG-62188
Change-Id: I71ce8abd6b5891e5b953126b1c35345892585931
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
For some scalings, setClipRect(QRect) would produce a clip one pixel
different from setClipRect(QRectF) because of different
rounding. Ditto for setClipRegion. Fix by making sure to transform
QRectFs instead of QRects.
Fixes: QTBUG-78962
Fixes: QTBUG-78963
Change-Id: I0be721133858c30769ec6d81e978962a3d6b70cf
Reviewed-by: Christoph Cullmann <cullmann@kde.org>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
CMake will complain that we have a duplicate test name otherwise.
Generally it makes a lot of sense to name the test binary the same as
the test itself.
Change-Id: I27c4b51e6a2869f025e1100f1a9dd6b54ebdaf55
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Morten Kristensen <me@mortens.dev>
Reviewed-by: Liang Qi <liang.qi@qt.io>
Makes the tests pass on Wayland.
Task-number: QTBUG-62188
Change-Id: I5860c1ae6dd3d15632d827f4e357cb6c2cc9c5e3
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This makes the test pass on Wayland.
Task-number: QTBUG-62188
Change-Id: Ib67cf8913055bbe753f71791095aff035342c18d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
[ChangeLog][QtCore][QAbstractItemModel] The match() method now
supports the new Qt::RegularExpression match flag value. This
will allow users to use either a string or a fully configured
QRegularExpression when doing searches. In the second case,
the case sensitivity flag will be ignored if passed.
Task-number: QTBUG-72587
Change-Id: I07c8d72a661c48b7f4fcf13ef8e95980bcdcb998
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Remove some code which was commented out with 'NOT_READY_YET' since the
initial Qt5 import. Since the mentioned bug reports are no longer
available remove this code.
Change-Id: I98686e53d85619f01d16105d147eba79b557a104
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Prefer qWaitForWindowExposed over qWaitForWindowActive whenever possible, skip
in the other cases.
Makes the test pass on Wayland.
Task-number: QTBUG-62188
Change-Id: I60b4000c72c3727a2f33b79a5038469055b0fef2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Makes the test pass on Wayland.
Task-number: QTBUG-62188
Change-Id: I53011ad623e4bdb557d79c136f06ce7ac00a08ee
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Makes the test pass on Wayland.
Task-number: QTBUG-62188
Change-Id: I3900925e74d8d940a8c5af87ea64a6ec3c8c3293
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
QDesktopWidget is marked as obsolete in docs, but it is not yet
completely deprecated, some of its methods are still in use.
Replace uses of the following methods marked as obsolete:
- QDesktopWidget::screenNumber(QWidget*) -> QWidget::screen()
- QDesktopWidget::screenGeometry(QWidget*) -> QWidget::screen()->geometry()
- QDesktopWidget::availableGeometry(QWidget*) -> QWidget::screen()->availableGeometry()
Task-number: QTBUG-76491
Change-Id: I2cca30f2b4caa6e6848e8190e09f959d2c272f33
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When a prepared statement is still alive after the database was removed
with QSqlDatabase::removeDatabase(), the cleanup routine is trying to
access the driver which is no longer alive which results in a crash.
Fixes: QTBUG-79019
Change-Id: I4630e3b947a12b23ed062f015abc373fc0e246c1
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Add a RAII class for registry keys and use it throughout
the code base.
Change-Id: I666b2fbb790f83436443101d6bc1e3c0525e78df
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When calculating the header section size based on its contents when a
stylesheet is used, the size hints from the stylesheet are used. In case
if the stylesheet specifies only one of the sizes, the other is set to
-1. Because of this the actual content size is ignored.
The solution is to calculate the size based on the application style, in
case if it's not specified in the stylesheet.
Fixes: QTBUG-75615
Change-Id: I3453fa623d75b6b32832edf753de6e3e4e7f5a22
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Some windowing systems (i.e. Wayland) do not allow applications to steal window
focus.
Normally, we would just replace qWaitForWindowActive with
qWaitForWindowExposed, because that is usually the intent, in this test
however, there are many occurrences of both variants right after each other.
And, as described in the commit message of 153e8b49a, this may be because
window activation may cause repaints, and we want to wait for it to reduce
the chance of receiving an extra repaint later (possibly causing tests to be
racy).
Therefore, I took the conservative approach, and kept the qWaitForWindowActive
calls, except when the capability is not available. Hopefully this will not
cause flakiness in existing platforms, while also allowing tests to pass on
platforms where activation is not supported.
Task-number: QTBUG-62188
Change-Id: I15502baa28c464a808d585a5e6d67c9b745b17ae
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
- Replaced the usages of the following deprecated APIs:
* QDesktopWidget::screenCount() -> QGuiApplication::screens().size()
* QDesktopWidget::screenGeometry(int) -> QGuiApplication::screens().at()
* QDesktopWidget::screenNumber(QPoint) -> QGuiApplication::screenAt(QPoint)
- Added notes for the QWidget *QDesktopWidget::screen(int), which
currently has no replacement.
- Fixed the tests to build conditionally, only when these APIs are
enabled.
Task-number: QTBUG-76491
Change-Id: I2fdec96d0a6a4fc782c53549b05a5556412b8305
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
MySql 5.0 was released 2005 so it's time to remove support for MySql 4.x
14 years later.
[ChangeLog][QtSql][QMYSQL] Removed support for MySql < 5.0 since 5.0 was
released 14 years ago.
Change-Id: I45005accdffefbd9338ac0e710512a4c7ea8e09e
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Always try to create the runtime directory and never change
the permissions of an existing directory. Conform to the
XDG Base Directory Specification:
"If, when attempting to write a file, the destination directory
is non-existent an attempt should be made to create it with
permission 0700. If the destination directory exists already
the permissions should not be changed."
Fixes: QTBUG-68338
Change-Id: Iaf854d69225fc46e43abae86232d749e5c247df0
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A previous fix has caused a performance degradation while adding a
check for avoiding adding duplicated rectangles to the update list.
This patch fixes it by using a std::set instead of a QList, avoiding
duplication while using an O(log N) operation, instead of the O(N)
used before.
Fixes: QTBUG-77952
Change-Id: Ifa9fbf110e0bad60ee02a42d91281981fd98ceab
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Only allow implicit conversions when the types involved are compatible.
That means, only allow construction and copy assignment when the type
X* is convertible to type T*. This is done using SFINAE and the
std::is_convertible type trait, which makes the previous
QSHAREDPOINTER_VERIFY_AUTO_CAST obsolete.
This patch fixes compilation when a function is overloaded with
Q{Shared,Weak}Pointer of different, incompatible types. Previously, this
resulted in a compilation error due to an ambiguous overload.
Change-Id: I069d22f3582e69842f14284d4f27827326597ca2
Fixes: QTBUG-75222
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The childEvent handler sets the enabled property of children as they are
added to the groupbox, but applications might later enable children and
check/uncheck the groupbox's checkbox in undefined order. In that case,
we would end up with enabled children inside a conceptually disabled
groupbox (the groupbox's checkbox represents the logical "disabled"
state), which breaks documented QWidget::enabled rules.
To make sure that all children are disabled as per the state of the
groupbox, we need to run that logic once the UI has been set up, and
before it becomes visible. This is what polishing is for, so listen
for that event in addition and handle it the same way as adding (which
duplicates things, but keeps existing code that might depend on things
being updated as they are added working).
Adds the case to the existing enabledChildPropagation test case.
[ChangeLog][QWidget][QGroupBox] Always disable children of a checkable,
unchecked group box before showing.
Change-Id: I978bd27b6f1a3f54ec745faeea529a98d0d93619
Fixes: QTBUG-25938
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Both the spline curves and (most of) the predefines curves are defined
as having start value 0.0 and end value 1.0. The spline and In/OutBack
functions would sometimes not produce that result precisely, so code
could not reliably depend on expressions like (easedValue < 1.0)
becoming false. Fix by explicitly handling endpoints.
Fixes: QTBUG-76781
Fixes: QTBUG-72630
Change-Id: I21be43af469a76c090154bffef8406a9baf2d0b1
Reviewed-by: Thomas Hartmann <thomas.hartmann@qt.io>
A default-constructed QDateTime is invalid, but compared equal to a
valid one referencing the start of 1970. This lead to date properties
in QML being initialized invalid but not getting an onChange if the
first value they're set to is the start of 1970.
Fixing that then lead to some tests failing. Indeed, the original
equality check involved using toMSecsSinceEpoch(), whose value is
undefined unless the datetime is valid, without a prior check on its
validity: so ensure all uses of toMSecsSinceEpoch() are guarded with
isValid() checks.
Reworked tst_QDateTime::toSecsSinceEpoch() to use its bool column
(previously unused, after separating from toTime_t(), which uses this
column for "out of time_t's range") for validity of the datetime.
[ChangeLog][QtCore][QDateTime] Invalid datetimes are now treated as
equal and less than all valid ones. They could previously be found
equal to valid datetimes.
Fixes: QTBUG-79006
Change-Id: Ie72deb8af4350a5e808144d0f6e42dc8eb3ff5ef
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Cleanup QAbstractItemView autotest:
- use range-based for loops
- use nullptr
- use member initialization
- use new signal/slot syntax
- use static invocations
- use override
- replaced QCoreApplication::processEvents with
QTRY_VERIFY/QTRY_COMPARE
Change-Id: Iba91811db6fb925364fc88ec36357e758b937329
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
It seems like qmake is happy with the comment, followed by a
continuation and then another comment, but having the continuation at
the end of the line makes more sense.
This will make it easier to port to CMake.
Change-Id: I20c964e8c3b6fea4745095783503045b191b000b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
There is no onscreen support for WinRT in the D3D11 backend yet.
However, offscreen operations (rendering into a texture) should work.
One catch is that there is no D3DCompile available for deployed WinRT
apps. So ship the intermediate format (DXBC output from fxc) in the
.qsb files.
Change-Id: Ic0aba4b817c27d13dcf3af41bf7612d799382655
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Also improve (docs and runtime checks) and test the minimum set
of required data to create a graphics pipeline.
Task-number: QTBUG-78971
Change-Id: If5c14f1ab1ff3cf70f168fde585f05fc9d28ec91
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
The joys of "level - Specifies the mipmap level of the texture
image to be attached, which must be 0." for glFramebufferTexture2D
in OpenGL ES 2.0.
Change-Id: Iaf19502f48d7ba73b26abb72535bfa6696a1e182
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
...and make the Null backend able to deal with these, for RGBA8 textures
at least. Naturally it is all QImage and QPainter under the hood.
Also fix a bug in the OpenGL backend, as discovered by the autotest:
the size from the readback did not reflect the mip level.
Task-number: QTBUG-78971
Change-Id: Ie424b268bf5feb09021099b67068f4418a9b583e
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
This also marks the beginnings of significantly extending autotesting
of the resource and rendering functionality in QRhi.
Also involves fixing up the buffer operation lists like we did
for textures before. This is to ensure updates and reads on the
same batch execute in the correct order. So just have two lists:
one with buffer, one with texture operations.
Also simplify the struct layouts. No need for those inner structs
with many duplicate members. This reduces the size even, since using a
union was never an option here. Also switch to a VLA, the size is around
253 KB per batch.
The Null backend now keeps track of the QRhiBuffer data so it can return
valid results in readbacks.
Task-number: QTBUG-78984
Task-number: QTBUG-78986
Task-number: QTBUG-78971
Task-number: QTBUG-78883
Change-Id: I9694bd7fec523a4e71cf8a5c77c828123ebbb3bd
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Properly return an invalid frame when calling jumpToFrame()
with a non existent frame number.
Fixes: QTBUG-79029
Change-Id: Ic40f4a6de3106fab42c0bb6c961194be47b04e31
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
QString::fromAscii() is deprecated since 5.0 but still tested.
So suppress deprecations for its code.
Change-Id: Ic048a843c43551021da39a16d94c3222201573dc
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
And add a test for it so it can no longer happen in any current or
future implementation.
Change-Id: I3214aa90595e291b1e1c66befe185cfe1ea7bc6b
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The --output-json parameter will make moc produce a .json file next to
the regular output file. With --collect-json the .json files for a
module can be merged into a single one.
Task-number: QTBUG-68796
Change-Id: I0e8fb802d47bd22da219701a8df947973d4bd7b5
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Cleanup QColumnView autotest:
- use range-based for loops
- use nullptr
- use member initialization
- use new signal/slot syntax
- use static invocations
- use override
Change-Id: Iae94e9074b65cca1e4d9eb199ea2b13e0cfa2880
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Is't been deprecated since Mac OS X 10.5.
Task-number: QTBUG-74872
Change-Id: I8b1ad7aca6448883cb164fd0c4b329592ca60548
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
People tend to "turn off debug and release builds" by just not building
one of the variants. For example, Qt's own rcc is built in release only,
however it is configured for debug_and_release with the same TARGET for
both.
Let qmake complain about conflicting TARGETs only we're about to build
all of those conflicting targets, i.e. if build_all is set.
Change-Id: I0448bf5cb421e2d801d3cc30e0d80353fba0d999
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
It is conceivable that during the try-compare loop of processing
windowing system events we loose and regain the focus. That would
explain the occasional test failure where instead of the expected 3
focus in events, we have received four.
Task-number: QTBUG-77769
Change-Id: I2221440d09a74d4d18a72f7786232b4491cf45a8
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
(cherry picked from commit 56f084781e)
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
It is finite and normal; it classifies as a zero; and it should not be > qfloat16(0).
Added tests to match.
Change-Id: I7874fb54f622b4cdf28b0894050ad3e75cf5d77c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Its limits() test was rather large and had some overlap with an older
qNan() test, that needed some clean-up (it combined qfloat16 values
with double and float values in ways that caused qfloat16 to be
promoted to another type, so we weren't testing qfloat16).
Renamed the qNan() test to qNaN(), separated out the parts of it that
actually tested infinity. Moved various parts of limits() to these and
rationalised the result. Split out a properties() test from limits()
for the properties of the qfloat16 type that are supplied by its
numeric_limits. Split out a data-driven finite() test to cover some
repeated code that was in limits() and extended it to test more
values. Added more tests of isNormal().
Fixed my earlier UK-ish spelling of "optimise", in the process, and
identify the processor rather than the virtualization as the context
where the compiler errs.
Change-Id: I8133da6fb7995ee20e5802c6357d611c8c0cba73
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As usual, keep some QVector overloads around to allow Qt Quick to compile.
Color attachments and vertex input bindings get an at(index) type of
accessor, unlike any other of similar lists. This is because there the
index is significant, and sequential iteration is not the only type of
operation that is performed. Sometimes a lookup based on an index will
be needed as well.
Task-number: QTBUG-78883
Change-Id: I3882941f09e94ee2f179e0e9b8161551f0d5dae7
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
It is conceivable that during the try-compare loop of processing
windowing system events we loose and regain the focus. That would
explain the occasional test failure where instead of the expected 3
focus in events, we have received four.
Task-number: QTBUG-77769
Change-Id: I2221440d09a74d4d18a72f7786232b4491cf45a8
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Forcing users to go through a QVector, when in practice they almost
always want to source the data from an initializer list, a QVarLengthArray,
or a plain C array, is not ideal. Especially since we can reason about
the maximum number of elements in the vast majority of use cases for all
the affected lists. QRhiResource is also not copyable so we do not need
the usual machinery offered by containers. So switch to a
QVarLengthArray.
Note that a resource is not a container. The only operations we are
interested in is to be able to source data either via an initializer
list or by iterating on something, and to be able to extract the data,
in case a user wishes to set up another resource based on the existing
one.
In some cases a QVector overload is kept for source compatibility with
other modules (Qt Quick). These may be removed in the future.
Also do a similar QVector->QVarLengthArray change in the srb-related
data in the backends.
Change-Id: I6f5b2ebd8e75416ce0cca0817bb529446a4cb664
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
One of our compilers for emscripten coerces all signaling NaNs to
quiet ones, so won't do any actual signaling. Anyone relying on them
to do so shall be disappointed, so it's better that they know about it
at compile-time - or, at least, have the ability to find it out.
Put the signaling NaN producers (and remaining (test) code using them)
under the control of a feature that's disabled when numeric_limits
claims double has no signaling NaN. Assume the bootstrap library
doesn't need signaling NaNs. Sadly, until C++20 <bit>, there's no
contexpr way to test that alleged signalling and quiet NaNs are
actually distinct.
Added some auto-tests for signaling NaN, including that it's distinct
from quiet NaN. Any platform on which the last fails should disable
this feature.
Task-number: QTBUG-77967
Change-Id: I57e9d14bfe276732cd313887adc9acc354d88f08
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Revert surfacePixelSize() to be a getter only. With Metal this will
mean returning the "live" layer size (and so not the
layer.drawableSize), which is in line with what we expect with other
backends.
Instead, we leave it to the swapchain's buildOrResize() to "commit"
the size by setting drawableSize on the layer. With typical
application or Qt Quick logic this ensures that layer.drawableSize is
set once and stays static until we get to process the next resize - on
the rendering thread.
This of course would still mean that there was a race when a client
queries surfacePixelSize() to set the depth-stencil buffer size that
is associated with a swapchain. (because that must happen before
calling buildOrResize() according to the current semantics)
That can however be solved in a quite elegant way, it turns out,
because we already have a flag that indicates if a QRhiRenderBuffer is
used in combination with (and only in combination with) a
swapchain. If we simply say that setting the UsedWithSwapChainOnly
flag provides automatic sizing as well (so no setPixelSize() call is
needed), clients can simply get rid of the problematic
surfacePixelSize() query and everything works.
Task-number: QTBUG-78641
Change-Id: Ib1bfc9ef8531bcce033d1f1e5d4d5b4984d6d69f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It can be important to see for example the adapter enumeration that is
printed when qt.rhi.general is enabled. Make it enabled by default in
the tests.
Change-Id: I7bd073781e176d9b17b5386c548e9f8a2e16c10f
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
The test was found crashing with software rendering in Qt 5.7.
Removing the insignification revealed that there are failures
on WinRT as well, blacklist them for the moment.
Task-number: QTBUG-78802
Fixes: QTBUG-49630
Change-Id: Ib1a3efe69d7b63cdd98c6da364ab09e0e2dbdf62
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Some AMD CPUs (e.g. AMD A4-6250J and AMD Ryzen 3000-series) have a
failing random generation instruction, which always returns
0xffffffff, even when generation was "successful".
This code checks if hardware random generator generates four consecutive
equal numbers. If it does, then we probably have a failing one and
should disable it completely.
Change-Id: I38c87920ca2e8cce4143afbff5e453ce3845d11a
Fixes: QTBUG-69423
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This will also cause clearing to 0,0,0,0.
Essential in order to allow fast testing of window transparency
issues in combination with QRhi and the various backends.
Change-Id: Iee2763c1d06f1d3e5d59a9142abaf30fab1dc543
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
With OpenGL a scissor (or viewport) rectangle is not allowed to have a negative
width or height. Everything else is allowed. This is also the semantic we wish to
keep for QRhiViewport and QRhiScissor.
This raises some problems. For instance, when we do bottom-left - top-left
rectangle conversion, the case of partially out of bounds rects needs to be
taken into account.
Otherwise, Qt Quick ends up in wrong scissoring in certain cases, typically when
the QQuickWindow size is decreased so the content does not fit because that will
then start generating negative x, y scissors for clipping (which is perfectly
valid but the QRhi backends need to be able to deal with it)
Then there is the problem of having to clamp width and height carefully, because
some validation layers for some APIs will reject a viewport or scissor with
partially out of bounds rectangles.
To verify all this, add a new manual test, based on the cubemap one. (cubemap was
chosen because that is an ideal test scene as it fills the viewport completely, and
so it is visually straightforward when a scissor rectangle is moving around over it)
Fixes: QTBUG-78702
Change-Id: I60614836432ea9934fc0dbd0ac7e88931f476542
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
Cleanup QItemView autotest:
- use range-based for loops
- use nullptr
- use member initialization
- use new signal/slot syntax
- use static invocations
- use override
Change-Id: I46edc2dc5bbaa09fb11710fa34ef4c6639181f62
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The fix for QTBUG-35203 set the Alt+Right shortcut on the next
button, clobbering the Alt+N shortcut from parsing the text (similar
for other languages). Add a separate shortcut for Alt+Right since a
button may not have several shortcuts.
Amends 6714196f45.
Fixes: QTBUG-78604
Change-Id: I1367da739c35fbd011d11f850c9bc3915113c644
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Following the deprecation of add[Default]CaCertificate[s] let's update
the uses of it. While we're doing this, let's also use QSslConfiguration
more in some places where it makes sense.
Change-Id: I2c9e7c73fee8a405492410378f2babe67d3a3f25
Reviewed-by: Jesus Fernandez <jsfdez@gmail.com>
Cleanup QHeaderView autotest:
- use range-based for loops
- use nullptr
- use member initialization
- use new signal/slot syntax
- use static invocations
- use override
Change-Id: I4df0b46c58ae9ae9dd4d9762390a2b14886aa68f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The error was due to a compiler optimization bug, which is fixed
in 16.3.0.
This reverts commit 305f2c3aa6.
Fixes: QTBUG-77239
Change-Id: Idfb86ad5c3ec026518f0713c41f7ad744ab4d5db
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Due to their sandboxed nature, UWP applications do not have access to
system settings like time zone.
Fixes: QTBUG-71185
Change-Id: I567a255f8adc18838fff79b81210faa094674722
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Cleanup QTreeWidget autotest:
- use range-based for loops
- use nullptr
- use member initialization
- use new signal/slot syntax
- use static invocations
- use override
Change-Id: Ied5c0b12c0d3338469e50f3b30892557c9b4479d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Separate quiet NaN from infinity and expand the nan-with-payload test
to a general test that bits outside the exponent don't break qIsNan().
Generally test more thoroughly and systematically.
Tests for signalling NaN shall follow.
Change-Id: Ib35dabacc8ebcc9a0761df38f6f419f0398d0e20
Reviewed-by: Erik Verbruggen <erik.verbruggen@me.com>
Testlib's signaldumper functionality would crash inside
testlib as it dereferenced the sender after it was deleted.
Change-Id: I6013b75b0a121e2768429d8a3cf0339a940314f2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Cleanup QListView autotest:
- use range-based for loops
- use nullptr
- use member initialization
- use new signal/slot syntax
- use static invocations
- use override
- replaced QCoreApplication::processEvents with
QTRY_VERIFY/QTRY_COMPARE
Change-Id: I38de7fb105cd70259e60e6b05de82944bee53a54
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
QSqlDriver::notifcation() signal is available in two versions since Qt4
times. They are both emitted in the corresponding places which is
useless.
Therefore deprecate the one-arg version.
[ChangeLog][QtSql][QSqlDriver] The one-arg version of
QSqlDriver::notifcation() is now deprecated.
Change-Id: Ie09aa0cc952f4d854c6fb617b37b9047a3194ee3
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Cleanup QTreeView autotest:
- use range-based for loops
- use nullptr
- use member initialization
- use new signal/slot syntax
- use static invocations / replace with QTRY_foo() calls
- use override
- use QStyledItemDelegate
Change-Id: I0e2d023254ed9f6f5d94cebf4d4358351cc4c3e2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Cleanup QTreeWidget autotest:
- use range-based for loops
- use nullptr
- use member initialization
- use new signal/slot syntax
- use static invocations
- use override
Change-Id: I2c07e95871d8725366cddd5cd098010709c8dc55
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The requirement to separate debug and release DLLs on Windows stems from
the Visual Studio C run-time library appearing in two different variants
(debug and release) and not mixing well. It's possible to perform builds
without optimzations and with debug symbols while linking against the
release version of the C run-time, but at the same time the debug
version of the run-time brings other developer visible advantages.
MinGW on the other hand does not have this distinction, does not ship
with separate DLLS and does also not require the VS C runtime library.
Therefore we do not need this separation for MinGW, which means that our
packages can be reduced in size and application developers wishing to
debug their applications do not have to use debug builds of the Qt
libraries or run into Qt internal debug code.
Task-number: QTBUG-78445
Change-Id: Idf588606091298dc44262c4c89e689df18d34747
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Those values must be scaled to device coordinates - otherwise borders,
margins etc. will be too small when rendered on high dpi devices
(printers etc.).
This change will add the scaling to those values.
QTextDocument::print applies 2cm margins to the root frame of a
unpaginated QTextDocument. Those margins were previously scaled to
device coordinates in order to give the correct result. But because
scaling is now done inside QTextDocumentLayout that scaling must be
removed and pixel values based on qt_defaultDpi are provided instead.
Fixes: QTBUG-78318
Change-Id: I6fe6dcc25f846341f6a2fe5df2f54baea473fdfd
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
We presently only support the UTC-based offset timezones that are
listed in the CLDR; and it doesn't make sense to list more than these
in the list of available zones. However, if someone sets their TZ
environment variable to a conformant UTC-offset string, we should make
sense of it even if CLDR doesn't mention it. Only do so as final
fall-back, as backends may handle the givne name better (some such IDs
appear in the windows-compatibility list, for example).
Added tests for the new UTC-offset time-zone names.
Removed one test that relied on them not being supported.
[ChangeLog][QtCore][QTimeZone] The constructor can now handle general
UTC-offset zone names. The reported id() of such a zone shall be in
canonical form, so might not match the ID passed to the constructor.
Fixes: QTBUG-77738
Change-Id: I9a0aa68281a345c4717915c8a8fbc2978490d0aa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In tst_QTimeZone::isTimeZoneIdAvailable(), a block of tests of
QTimeZonePrivate::isValidId() overlapped with what
tst_QTimeZone::isValidId_data() tests; so move out of the former and
adapt to use by the latter. At the same time, check that each
allegedly available zone *is* available enough that we can create it
and it's valid.
Change-Id: I3f7c8e2e3fbfb201747c7b769d691d7f17fc6b2a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If the domain passed down is an actual TLD that's the subject of a *
rule, e.g. "ck" subject to *.ck, then we were finding no dot in it and
concluding that it couldn't be the subject of a * rule.
Added a test for the specific .ck case and commented on where we could
get some canonical test data that I tripped over while researching
this. Cross-reference the cookie-jar test from the QUrl test, too.
Fixes: QTBUG-78097
Change-Id: Id858a9dae22e6b306a68df3fc199e0160f537159
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The DefaultFontFallbacks.plist system file that we used for looking up
style fallbacks does not exists in macOS 10.15, nor did it ever exists
on iOS. Instead of relying on this file, we hard-code a set of default
families, that we then look up the fallbacks for.
The result of QFont::defaultFamily() on macOS is now:
QFont::Helvetica --> "Helvetica"
QFont::Times --> "Times New Roman"
QFont::Courier --> "American Typewriter"
QFont::OldEnglish --> ""
QFont::System --> "Lucida Grande"
QFont::AnyStyle --> "Lucida Grande"
QFont::Cursive --> "Apple Chancery"
QFont::Monospace --> "Menlo"
QFont::Fantasy --> "Zapfino"
And on iOS:
QFont::Helvetica --> "Helvetica"
QFont::Times --> "Times New Roman"
QFont::Courier --> "American Typewriter"
QFont::OldEnglish --> ""
QFont::System --> "Helvetica"
QFont::AnyStyle --> "Helvetica"
QFont::Cursive --> ""
QFont::Monospace --> "Menlo"
QFont::Fantasy --> "Zapfino"
Fixes: QTBUG-78240
Change-Id: Ie9bc13c9c1031d89f024199e4736a046c568a48d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Since 9c8d1ca18b, the test would fail
when High DPI scaling is enabled:
FAIL! : tst_QWidget::translucentWidget() Compared QImages differ in device pixel ratio.
Actual (actual): 2
Expected (expected): 1
.\tst_qwidget.cpp(8913) : failure location
Set the device pixel ratio on the expected pixmap to fix this.
Change-Id: I517495931c2c6b1f49125bb4b5836e304bdbf545
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Cleanup QTableView autotest:
- use range-based for loops where possible
- use nullptr
- use member initialization
- use new signal/slot syntax
- remove a lot of c-style casts
- use static invocations
- use override
- instantiate objects on stack instead heap to avoid memleaks
Change-Id: I52fee26697b1732afa9f965e600d4c59551370ce
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Use the standard testlib helpers for generating clicks and port the
remaining occurrences to the new versions of
QWindowSystemInterface::handleMouseEvent(). Similarly, fix
QWindowSystemInterface::handleTabletEvent().
Task-number: QTBUG-76491
Change-Id: I6a30957164891b56a018696606956c3cab56047f
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
There is no year 0 in the proleptic Gregorian calendar, so QDate()
won't be happy if asked for a date in it. Tweak scanning of the data
we get from MS-Win so as to avoid a date calculation that could
otherwise happen in year 0 when constructing
QDateTime(QDate(1, 1, 1), QTime(0, 0, 0), QTimeZone("Australia/Sydney")).
Added a test for this case, which Oliver Wolff has kindly verified
does reproduce the assertion failure. However, Coin is unable to
reproduce, as all its MS builds are configured with -release, so
Q_ASSERT() does nothing. (The relevant code then skips over year 0,
albeit for the wrong reasons, and gets the right results, albeit
inefficiently, leaving no other symptom by which to detect the
problem.)
Fixes: QTBUG-78051
Change-Id: Ife8a7470e5bd450bc421e89b3f1e1211756fc889
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
...if there is one and the concept is applicable in the first place.
Change-Id: Iab202c1c1cdd229f4910159de4cae7ce30805ea9
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
The device can be lost when physically removing the graphics adapter,
disabling the driver (Device Manager), upgrading/uninstalling the
graphics driver, and when it is reset due to an error.
Some of these can (and should) be tested manually, but the last
one has a convenient, programmatic way of triggering: by triggering
the timeout detection and recovery (TDR) of WDDM. A compute shader
with an infinite loop should trigger this after 2 seconds by default.
All tests in tests/manual/rhi can now be started with a --curse <count>
argument where <count> specifies the number of frames to render before
breaking the device. Qt Quick will get an environment variable with
similar semantics in a separate patch.
Change-Id: I4b6f8d977a15b5b89d686b3973965df6435810ae
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
Results on my machine:
PASS : tst_QReadWriteLock::writeOnly(QMutex)
RESULT : tst_QReadWriteLock::writeOnly():QMutex:
3,607 msecs per iteration (total: 3,607, iterations: 1)
PASS : tst_QReadWriteLock::writeOnly(QReadWriteLock)
RESULT : tst_QReadWriteLock::writeOnly():QReadWriteLock:
39,703 msecs per iteration (total: 39,703, iterations: 1)
PASS : tst_QReadWriteLock::writeOnly(std::mutex)
RESULT : tst_QReadWriteLock::writeOnly():std::mutex:
3,697 msecs per iteration (total: 3,697, iterations: 1)
PASS : tst_QReadWriteLock::writeOnly(std::shared_mutex)
RESULT : tst_QReadWriteLock::writeOnly():std::shared_mutex:
5,727 msecs per iteration (total: 5,727, iterations: 1)
PASS : tst_QReadWriteLock::writeOnly(std::shared_timed_mutex)
RESULT : tst_QReadWriteLock::writeOnly():std::shared_timed_mutex:
5,921 msecs per iteration (total: 5,921, iterations: 1)
(the 'nothing' test of course doesn't work with writing, as writing to
the same QString from different threads is UB)
Change-Id: Ia78b54963a51eaf6563ce0d243316a3337056a83
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Cleanup QTableWidget autotest:
- use range-based for loops where possible
- use nullptr
- use member initialization
- use new signal/slot syntax
- remove a lot of C-style casts
- use static invocations
- use override
- instantiate objects on stack instead of heap to avoid memleaks
Change-Id: I99ed144caab88d648d5ab987ce0963fbc6f1197d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The constructor taking a QWidget is needed for specifying the screen
where the splash screen should be displayed.
Add a new constructor for specifying the target screen for the splash screen
directly, instead of "extracting" the screen information from a widget.
This removes the need for using the deprecated QDesktopWidget.
Deprecate the constructor taking a QWidget.
Task-number: QTBUG-76491
Change-Id: I1dde242ff5f7b53e52af308bb685f492d6266d33
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The test is not failing anymore on QEMU targets.
This partially reverts commit
71bd06d516.
Fixes: QTBUG-71915
Change-Id: I68593edf0ec245e14879833c8aa90661a3c2e227
Reviewed-by: Liang Qi <liang.qi@qt.io>
BT.2020 is an HDR color space and its luminance range doesn't match
that of the rest of the currently available color spaces. Without
support for white-point luminance in 5.14, there would be a behavior
change when luminance support is later introduced, so it is better to
remove it now, and reintroduce it when the necessary handling of
different luminance levels is available.
Change-Id: Ie29e4dd757faae3ac91d4252e1206acce42801dc
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This was accidentally introduced by
2f33e030b8 and since manual tests are not
built by default, was not discovered earlier.
Change-Id: I5cb6d5cfe0911bdb01a33014f2648a47b7a48848
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QShortcut::event() did not call the base class implementation
QObject::event() which caused that e.g. QEvent::DeferredDelete was not
handled.
Fix it by calling QObject::event() when the event was not handled.
Fixes: QTBUG-66809
Change-Id: Ideebc980bc658f8f2b9ec4417e738bccda5eeab5
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
And let the meat of the function be shared with the rbSwap routine.
Change-Id: I0ea18b30c26ff050c17dcb3ad4d654bfbb8c6221
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
The enum OptimizationFlag::DontClipPainter is deprecated and not used in
the code since Qt4 times. Therefore also mark it as deprecated so it can
be removed with Qt6
Change-Id: I318a55cf42e7a233d13d4ec0144e1977251f5c92
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Fix warnings:
tst_qpdfwriter.cpp:223:58: warning: virtual void QPdfWriter::setPageSize(QPagedPaintDevice::PageSize)’ is deprecated: Use setPageSize(QPageSize(id)) instead [-Wdeprecated-declarations]
by using the QPageSize-based API. Streamline the code by using
QPageSizeId.
Task-number: QTBUG-76491
Change-Id: I409f0e27de64bc66502a60a9109c6115f36e527d
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The minimum supported version is Windows 7. Remove
QOperatingSystemVersion::WindowsVista added by
b0cd007335 and replace with "true"
wherever it was used.
Change-Id: I08c0208467b655a921b6773f77d8bc099be69031
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Deprecate the constructors, add guards.
Use a QStandardItemModel in tst_QCompleter::setters() instead.
Task-number: QTBUG-69410
Change-Id: If77298982bb3d0b5321ae1271fab3f33b196101d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Words should not be abbreviated.
Split a long line and reflowed some comments in the process.
Fixes: QTBUG-78008
Change-Id: I52d75409f02e2cecbed3e94d424617ad594c275b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
I was observing rare crashes on my mac, where I was using SecureTransport.
This would imply both the client (the test) and the server were working
in h2c mode. But this is against the test's logic - the first request
will be HTTP/1.1 (and upgrading protocol) and I wanted to send 3 HTTP/2
requests instead.
Fixes: QTBUG-77476
Change-Id: I048ca242e2096ca36dd112277807d1fee530150c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Change the lancelot baseline test runner to use generic text files for
host info data collection. This also avoids relying on QProcess and
scraping the bash scripts output from stdout.
Fixes: QTBUG-71836
Change-Id: I88a46c99dbb11f71afc18cae5a6d2fbebcbe76c5
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
We don't need a getter for the 'preset' of a color-space, as color
spaces can be compared to the presets directly. This allows us to
remove the Undefined and Unknown values from the presets.
Internally we still distinguish known presets from unknown or undefined
presets via the magic 0-value. The validity of a QColorSpace is not
based on this preset, but on its actual values.
Fixes: QTBUG-77963
Change-Id: I1e0a2a4be83021b8c82b3c778019f680fd46455b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
- Remove member m_testWidget; instantiate test widget on the
stack where needed
- Introduce nullptr
- Use range-based for
- Streamline some code
- Fix static invocation
- Fix class structure, add override
- Use initializer lists
- Fix some style issues
Task-number: QTBUG-76493
Change-Id: If339d51a16bb77565cf10404ad1266c8f63a68b4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The test requires High DPI scaling to be disabled since it
manipulates the factors itself in a test.
Turn it off initially and introduce a member variable
containing a suitable size depending on the screen to make the
test pass on High DPI screens without violating minimum window
widths on Windows.
Task-number: QTBUG-76493
Change-Id: I7b908940413d6a35a4bee781b4df07a31069bb17
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QGraphicsItem::ItemMatrixChange has been deprecated since 5.14. Fixed
the usage in tests to compile condinionally, only when it is available.
Change-Id: I63e892a01a50fb9ac51bf38eb761cb26375bc194
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Stop using QExplicitlySharedDataPointer, makes it possible to inline
the move constructor and assign operator.
Also protect other methods from nullptr d_ptr, and change the default
constructed value to also have a null d_ptr, to match the result after
a move.
Change-Id: I40928feef90cc956ef84d0516a77b0ee0f8986c7
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
In QPainter, there is a shortcut code path for the drawImage(point,
image) call, relative to the full drawImage(targetRect, img,
srcRect). The lance script interpreter would only use the latter, so
the former was not covered by the tests.
As a driveby, remove the pointless usage of non-default dithering
flags in drawImage(), since it is more important to test the default.
Change-Id: Id373fd528a0c4c40b6bd8eea37b960fd7cdb2cc7
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
In case a text to be layouted contains more than 128 directional characters
it causes the application to crash
The function initScriptAnalysisAndIsolatePairs() collects information of
RTL/LTR chaaracters into vector "isolatePairs". The size of the vector is
capped to 128. Later the function generateDirectionalRuns() iterates
the text again and tries to access items from the previously capped vector
above the upper bound.
Task-number: QTBUG-77819
Change-Id: Ibb7bf12c12b1db22f43ff46236518da3fdeed26a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
(cherry picked from commit 1232205e32)
Reviewed-by: Jukka Jokiniva <jukka.jokiniva@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
In case a text to be layouted contains more than 128 directional characters
it causes the application to crash
The function initScriptAnalysisAndIsolatePairs() collects information of
RTL/LTR chaaracters into vector "isolatePairs". The size of the vector is
capped to 128. Later the function generateDirectionalRuns() iterates
the text again and tries to access items from the previously capped vector
above the upper bound.
Task-number: QTBUG-77819
Change-Id: Ibb7bf12c12b1db22f43ff46236518da3fdeed26a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The API is problematic for several reasons:
- the mixing of flags and enum in a single enum type
- the name "type" as somewhat overloaded
- the ease of misuse when comparing the result rather than testing
for a bit being set
In light of this, focus for 5.14 on the new isShortcut and
isSymbolicLink functions, thus migitating the problematic
isSymLink which conflates the two concepts.
Change-Id: I57e02321edd5061f69a775f04a0932ef89adf866
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Test more methods.
Document what the existing test covers.
Use the right #include for QDate.
Change-Id: I051542c244e5bc381aafa3ae38144e246919db7a
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Aside from the start-date and the end-date, and a variant with a
time-zone, the lists various tests were building were all built the
same way; so pack that up as a pair of functions (one without
time-zone, one with) to save duplication. Make the list in each
function const, ready for conversion of foreach loops to ranged for.
In the process, replace QList with QVector, reserve space before we
populate and use auto for the now-const list variables it's saved in.
Change-Id: I7d8cce459a4d6111cd645e8d3966ad769ab7e201
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Multiplying a Julian Day number by the number of milliseconds per day
does not get you a time since the start of 1970; it gets you a time
since the start of the Julian Day number system, which was several
millennia earlier.
Change-Id: Ic90a6c3de445baf9cfd30f28dd847f146e6a7adf
Reviewed-by: David Faure <david.faure@kdab.com>
This can, of course, only be done in private APIs - but comment on
public APIs to do the same at Qt 6.
Change-Id: I3c79951572be3c37b0b0c5b1b05bced051a40964
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
According to Windows docs, GetMessage() function retrieves the messages
from the input queue in defined order, where posted messages are
processed ahead of input messages, even if they were posted later.
Therefore, if the application produces a posted event permanently, as
a result of processing that event, user input messages may be blocked
due to hard CPU usage by the application.
It's not a problem, if an internal Qt event loop is running. By calling
sendPostedEvents() on the beginning of processEvents(), we are sending
posted events only once per iteration. However, during execution of
the foreign loop, we should artificially lower the priority of the
WM_QT_SENDPOSTEDEVENTS message in order to enable delivery of other
input messages.
To solve the problem, it is proposed to postpone the
WM_QT_SENDPOSTEDEVENTS message until the message queue becomes empty,
as it works for the internal loop.
Task-number: QTBUG-77464
Change-Id: I8dedb6837c6fc41aa6f497e67ab2352c2b4f3772
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
As an option. Must opt in via setting ExternalContentsInPass in
the flags for beginFrame(). It is somewhat unfortunate to require
declaring this up front, but forcing using secondary command buffers
always, even though beginExternal() may not be used in many applications,
would be an overkill.
Change-Id: I8d52bcab40c96f89f140c4c7877b6c459925e3c7
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
QColorConstant is a C++11 version of Qt::GlobalColor, except that instead
of Qt::red being an enum, QColorConstants::red is an actual QColor instance,
a bit like in the Qt 3 days.
In addition, the SVG names that QColor understands are also available,
with the same values. Technically, when building a QColor from a color
name, QColor ignores casing and whitespaces; we stick to the SVG/CSS
official color names (which are lowercase), and prefix them with Svg
to clarify where they come from. For instance, note how SVG's gray
is not Qt::gray.
[ChangeLog][QtGui][[QColor] Added QColorConstants, a namespace
containing constexpr QColor instances.
Change-Id: Ic9fab26a9a537fcc43cc230da28f4c6314a32438
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The test requires High DPI scaling to be disabled since it
captures widgets.
Turn it off initially and introduce a member variable
containing a suitable size depending on the screen to make the
test pass on High DPI screens without violating minimum window
widths on Windows.
Change-Id: Ida9f306cff6abd48ee5de7001c7670a0da60c6c2
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
- Fix includes
- Add window titles
- Introduce nullptr
- Remove unneeded C-style casts in QCOMPARE
- Replace remaining C-style casts
- Use range-based for
- Fix static invocation
- Fix class structure, add override, use member initialization
- Fix top level widget leaks and add a check
- Silence debug output by using a logging category
- Use Qt 5 connection syntax
Task-number: QTBUG-76497
Change-Id: I77532a517353d04d1da43ce844988ee0ac2ffc7d
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Is pretty common on some architectures so we can avoid swizzling by
supporting it.
Fixes: QTBUG-45671
Change-Id: Ic7a21b5bfb374bf7496fd2b2b1252c2f1ed47705
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
For tst_QFrame and tst_QOpenGLWidget, force scaling off
since they do screen captures which would fail with
scaling activated due to different device pixel ratios.
For tst_QGraphicsItem and tst_QHeaderView, force
scaling on for Windows since some tests otherwise fail
due to violation of the minimum size constraints of
framed windows on Windows.
The tests will then pass regardless of any environment
setting of the scaling variables on a developer
machine.
Change-Id: Iefa4e84b433f7e51dce4e416546a9eda8ee6d0f1
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
This test displays a summary of relevant DPI and scale
factor/devicePixelRatio values:
- DPI and DPR as seen by the application
- Input from QPlatformScreen
- Input from environment variables.
Task-number: QTBUG-53022
Change-Id: I340391624b202e342f22902ffbd7228fe7fbe94b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Remove pixelScale() in favor of logicalBaseDpi(). Compute scale factor
based on logical DPI and logical base DPI, or optionally based on the
physical DPI.
Add policies for running the scale factor and adjusting the logical
DPI reported to the application. The policies are set via environment
variables:
QT_SCALE_FACTOR_ROUNDING_POLICY=Round|Ceil|Floor|RoundPreferFloor|PassThrough
QT_DPI_ADJUSTMENT_POLICY=AdjustDpi|DontAdjustDpi|AdjustUpOnly
QT_USE_PHYSICAL_DPI=0|1
Done-with: Friedemann Kleint <Friedemann.Kleint@qt.io>
Task-number: QTBUG-53022
Change-Id: I4846f223186df665eb0a9c827eaef0a96d1f458f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The test contained outdated baseline images for
1) Windows Vista: They were only used for OS version Vista
and do not match any more.
2) macOS: They were apparently were not in use any more
Remove the testing and image comparison code.
Task-number: QTBUG-76493
Change-Id: I91cec5113db8d1845b43f97ad2987e63d9f86ac7
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
And send it in our 'SETTINGS' frame. Add an auto-test
for this and (as a bonus) - fix a bug accidentally
introduced by the previous change.
Task-number: QTBUG-77412
Change-Id: I4277ff47e8d8d3b6b8666fbcd7dc73c827f349c0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Otherwise, we get a warning:
QWARN : tst_NoQtEventLoop::consumeSocketEvents() QWindowsContext::windowsProc: No Qt Window found for event 0x2a3 (WM_MOUSELEAVE), hwnd=0x0x9b80646.
in the event loop which is running by another test. So, add missing
'delete' call.
Change-Id: Ib9b24155bdd6e78062a5234c317c9f878906e413
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This has its own locale data, extracted from CLDR. This data may
potentially be shared with other variants on the Islamic calendar, so
is handled by a separate base-class, QHijriCalendar, on which such
variants may base their implementations.
[ChangeLog][QtCore][QCalendar] Added support for the Islamic Civil
calendar, controlled by feature islamiccivilcalendar, with locale data
that can be shared with other implementations, controlled by feature
hijricalendar.
Fixes: QTBUG-56675
Change-Id: Idf32d3da7034baa8ec5e66ef847e59a8a2f31cbd
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
These functions tighten the integration of QMargins(F) with the rest
of the geometry classes by providing a way to apply margins to sizes
(and later, rects).
Apply them in a few obvious cases across QtWidgets.
[ChangeLog][QtCore][QSize/QSizeF] Added grownBy(QMargin(F))/shrunkBy(QMargin(F)).
Change-Id: I8a549436824cdb7fb6125a8cde89d5bf02826934
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Base it on QWidgetPrivate::associatedScreen(), but make a larger
effort to find a screen in case the widget is not shown yet.
Rename QDesktopScreenWidget::screen() to something else to avoid
clashes.
Task-number: QTBUG-62094
Task-number: QTBUG-53022
Change-Id: I36ba5ef5f0645a4ac89da0b38a391f7057b2f49c
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This has its own locale data, extracted from CLDR.
[ChangeLog][QtCore][QCalendar] Added support for the Jalali (Persian
or Solar Hijri) calendar, controlled by feature jalalicalendar.
Fixes: QTBUG-58404
Change-Id: Id5c56a10db05a4fd612aafc01615273db81ec743
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
These share their locale data with the Gregorian calendar, making them
virtually free to add. Still leave them out of the boot-strap build,
though.
[ChangeLog][QtCore][QCalendar] Added support for Julian and Milankovic
calendars. These are enabled by default, except in bootstrap builds.
Change-Id: I585045ed9e78c1e959957f6772b3e144093b701c
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The benefit of keeping this code around was to inspire or inform
changes in the areas to take into account possibly missing features
in Qt 5, but at this point that benefit is questionable. We can
always use the history to learn about missing pieces if needed.
Change-Id: I87a02dc451e9027be9b97554427bf8a1c6b2c025
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It couldn't find the test images if not build in sources.
Change-Id: Ieeb5a76694a37d05b3e9a4ed0154885040b0812f
Reviewed-by: Daniel Smith <Daniel.Smith@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
That way the image formats with color space supports all have both read
and write support.
Change-Id: Ib52ebd56192c4a8a0897a6afc7c4a26020319270
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Add QCalendarBackend as a base class for calendar implementations and
QCalendar as a facade via which to access it.
QDate's implicit implementation of the Gregorian calendar becomes
QGregorianCalendar and QDate methods now support choice of calendar.
Convert QLocale's CLDR data for month names to a locale-data component
of each supported calendar and relevant QLocale methods now support
choice of calendar. Adapt Python scripts for locale data generation to
extract month name data from CLDR (keeping on version v35.1) into the
new calendar-locale files. The locale data for the Gregorian calendar
is held in a Roman calendar base, for sharing with other calendars.
Add tests for basic uses of the new API.
[ChangeLog][QtCore][QCalendar] Added QCalendar to support diverse
calendars, supported by implementing QCalendarBackend.
[ChangeLog][QtCore][QDate] Allow choice of calendar in various
operations, with Gregorian remaining the default.
Done-with: Lars Knoll <lars.knoll@qt.io>
Done-with: Edward Welbourne <edward.welbourne@qt.io>
Fixes: QTBUG-17110
Fixes: QTBUG-950
Change-Id: I9d6278f394269a183aee8156e990cec4d5198ab8
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Quoting a blog from 2009, "this class is responsible for figuring out which parts
of the window surface needs to be updated prior to showing it to screen, so it's
really a repaint manager."
https://blog.qt.io/blog/2009/12/16/qt-graphics-and-performance-an-overview/
What better time to do the rename than 10 years later!
Change-Id: Ibf3c3bc8c7df64ac03d72e1f71d296b62d832fee
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Similar to TLS configuration that we can use on QNetworkRequest,
we can configure different options in our HTTP/2 handling by
providing QNetworkAccessManager with h2 configuration. Previously,
it was only possible internally in our auto-test - a hack with
QObject's properties and a private class. Now it's time to provide
a public API for this.
[ChangeLog][QtNetwork][QNetworkRequest] Add an ability to configure HTTP/2 protocol
Change-Id: I80266a74f6dcdfabb7fc05ed1dce17897bcda886
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
It was added for Symbian almost 10 years ago (d7057e7c1f1a), for a somewhat
dubious use-case. The Symbian code is since long gone (ae30d7141), so the
remaining pieces are just adding complexity to the already intricate workings
of the QtWidgets backingstore/painting logic.
Task-number: QTBUG-8697
Change-Id: I82af610a8ac26719c588ac63f06b4501f59b400d
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
(cherry picked from commit 2e0b0be2ce)
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Supported style attributes:
<table>
style: supports "border-collapse: collapse" and "border-color".
border: width of the outer border
bordercolor: basic color for all borders
<tr>
style: not supported
<td>/</th>
style: supports the "border", "border-[top|left|bottom|right]]"
shorthand styles and the "border-width", "border-color"
and "border-style" (and the top/left/bottom/right variants)
attributes
<table border=1 style="border-collapse: collapse"> will render
a simple 1px table grid.
Notes:
The QTextDocument table model is much simpler than the HTML table model.
It basically only has <table> and <td> support. So the HTML parser is
forced to map markup and styling to the QTextDocument model which
is not without loss.
In other words: While QTextDocument -> HTML -> QTextDocument should
preserve the QTextDocument structure, HTML -> QTextDocument -> HTML
does not preserve the HTML DOM at all.
So for now the HTML importer and writer only support border styles on
the <td> and <th> nodes. In future updates, the HTML parser might be
enhanced to map <tr> and <table> CSS styles to the cells.
Change-Id: If9e7312fa6cbf270cf8f7b3c72ba1fa094107517
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Replace foreach with range-based for loop, replace some int values with
the correct Qt flag enum as drive-by.
Change-Id: I41c52f6ae6c537fa9ad4f9e169485533936952d1
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This patch was generated with tooling from patchset 31 of
https://codereview.qt-project.org/c/qt/qtqa/+/267034 in interactive
mode. General platform names were chosen if greater than 60% of the
currently active platforms of a given type in COIN recently failed.
Change-Id: Ia4bde7f0ec422bbb727dc9d7151295159094f146
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
It was added for Symbian almost 10 years ago (d7057e7c1f1a), for a somewhat
dubious use-case. The Symbian code is since long gone (ae30d7141), so the
remaining pieces are just adding complexity to the already intricate workings
of the QtWidgets backingstore/painting logic.
Task-number: QTBUG-8697
Change-Id: I82af610a8ac26719c588ac63f06b4501f59b400d
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Qt has traditionally considered Windows shortcut files equivalent to
symlinks on Unix file systems. Because of NTFS symlinks, the
interpretation of shotcut files as symlinks is confusing.
In this change, QFileInfo treats shortcut (.lnk) files as regular files
but can follow the pointed object.
In addition, QFileInfo introduces a more comprehensive file type. So
that applications can make well-informed decisions about how to treat a
file system entry.
Based on the implementation of QFileInfo::type(), two inline helper
functions are introduced to QFileInfo.
1. isSymbolicLink, returns true if it points to a symbolic link.
2. isShortcut, returns true if it points to a shortcut.
[ChangeLog][QtCore][QFileInfo] Introduce QFileInfo::type() to replace
the isSymLink method.
Task-number: QTBUG-75869
Change-Id: Icc0dd52f9ad0ea50b0265d77ee0d0a3d25054e39
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Qt for QNX is, by default, built without the clipboard feature.
Change-Id: Ie8a36ceb0c0f0a695ae7d0fcf6f0bd70d2a43e0c
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Dan Cape <dcape@qnx.com>
Reviewed-by: Rafael Roquetto <rafael@roquetto.com>
Add support for astc format files as an experimental feature.
To enable, configure with "-feature-texture_format_astc_experimental"
(Backported from commit 5a4db421bd94acd12a4ac1f77031996b95f85dbf)
Change-Id: I9a2f7b1fa20ba344b79637bafb50ff2bd0596747
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
...with a failing test case for QTBUG-77299.
Task-number: QTBUG-77299
Change-Id: I42c4fc4bb96f8660f8ff9bea97e6096ca6cec972
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When running Qt autotests on a developer machine with a high
resolution, failures occur due to either some widget becoming too
small, some rounding fuzz appearing when Qt High DPI scaling is active,
or some test taking screenshots failing to deal with device pixel
ratios != 1 in the obtained pixmaps.
It is not feasible to adapt all tests to pass on high resolution
monitors in both modes (Qt High DPI scaling enabled/disabled). It
should be possible to specify the High DPI setting per test.
Previously, it was not possible to set the Qt High DPI scaling
attributes since they must be applied before QApplication
instantiation.
Enable this by checking for the presence of a static void initMain()
function on the test object and invoking it before QApplication
instantiation.
Prototypically use it in tst_qtimer and to turn off High DPI scaling for
tst_QGL.
[ChangeLog][QtTestLib] It is now possible to perform static
initialization before QApplication instantiation by implementing a
initMain() function in the test class.
Change-Id: Idec0134b189710a14c41a451fa8445bc0c5b1cf3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QTreeView allowed to set the sort column to -1 which shows the data in
it's natural order (when the model supports it). This functionality was
removed during the porting away from the deprecated sortByColumn(int)
functionality done in d0f909f8db
Readd the functionality and also allow it for QTableView.
Fixes: QTBUG-77419
Change-Id: I96b0c09ab9da36ca0a9de58fe0f37e2c56b1d51b
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: David Faure <david.faure@kdab.com>
This functionality is especially convenient if meta-object system is
heavily used in a test. For example, if you need to test a bunch of
signals based on their names and/or argument types.
Change-Id: I09a4ecbbd3d0859b5fd466d9dde7679804eb7614
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
After comparing colorspaces was remove from QImage equality, the test
was no longer testing what it was supposed to.
Change-Id: Ie7ee8ac2f488ea4254086cbb91a2662dc729e80b
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
... in case of a test failure. QAutoPointer is private API, but here we can use it.
Change-Id: I45b734385cd13fdea95d0100f2d8152f969612f9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Windows resource files support a subset of C preprocessor directives.
Among others they can have #include directives.
Use QMake's own scanner to retrieve the files that are included by a
Windows resource file and add them to its dependencies.
For the test case the TestCompiler class had to be extended:
runCommand is now public, and commandOutput is less peculiar.
Fixes: QTBUG-3859
Change-Id: I138703352c37c98297c0574a9a440510c1c494b8
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This happened to work by chance, as QList::insert() would
gracefully handle out of bounds insertions.
Change-Id: I7ee1e645ed9a538946a509957ce5155641ffea1d
Reviewed-by: David Faure <david.faure@kdab.com>
This commit adds transitive dependencies to the plugins, so that a
sane set of default plugins get auto-imported when linking against a
module. It also provides a new function, qt5_import_plugins(), which
allows you to override the set of plugins that get imported. The decision
of whether or not to import a specific plugin is based on several custom
target properties and a very clever generator expression.
Note that this change only imports plugins on static Qt builds. It
does nothing on shared Qt builds, as the shared libraries already have
their own plugin import mechanism.
[ChangeLog][CMake] Added ability to auto-import non-qml plugins on
CMake builds
Task-number: QTBUG-38913
Task-number: QTBUG-76562
Change-Id: I2d6c8908b521cf6ba1ebbbc33a87cb7ddd9935cf
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The sendMouseMove() function calls QTest::mouseMove(),
which again calls QCursor::setPos() to move the cursor.
It then creates and sends a MouseMove event, using
the constructor which picks up the global position
by calling QCursor::pos().
On macOS 10.14, QCursor::setPos() may silently fail
if the user does not grant the application permission
to move the cursor (via a dialog). As result of this
the mouse move event gets an incorrect global position.
Provide the global position directly when creating
the event to make sure it gets the correct value.
Task-number: QTBUG-75786
Change-Id: I3e8df450fea802783a3d1dbe471753f502b42de3
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
We were loading “Background.png” from the KeyboardSetupAssistant
app bundle. As of macOS 10.14 that image is no longer
there.
Adjust auto tests and document the behavior.
Change-Id: Icb4dd73b3fa88927e87bb86db2bc9f7b4a8094f7
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Commit b6ded193 added an unconditional dereference
of the platformScreen pointer, for calls where nativePostion
is non-nullptr.
Change-Id: I4a6fbbd0337f91d4fcb76c17b4dc60e1b9ad10ed
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
As a macro, we can't directly deprecate it, but need to make it call
something deprecated. That is a new ctor with a new enum type
added. The type might be useful for other such ventures, so put it
into qglobal.h
Remove the QT_NO_UNICODE_LITERAL protection, as it's always false
these days, and QT_UNICODE_LITERAL is unconditionally #defined a 20
lines above.
[ChangeLog][QtCore][QStringView] Deprecated the (undocumented)
QStringViewLiteral macro. Just use u"" or QStringView(u"") instead.
Change-Id: I9141320225037e1bc6b7f920bf01a9d0144fdac2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
There are two cases:
In a BlockingQueuedConnection, QMetaCallEvent doesn't allocate memory
and instead passes already existing pointers through. A QSemaphore
is used to serialize data access between threads. So the constructor
taking a QSemaphore can be simplified to only accept an existing arg
array.
In a QueuedConnection, QMetaCallEvent needs to make deep copies of
the arguments, and memory needs to be allocated based on the number
of arguments. The previous code put the burden of memory allocation
on the code generating the event, while the memory was free'd by
~QMetaCallEvent. Instead, make it QMetaCallEvent's responsibility
to allocate and free the memory as needed, and adjust the code
generating QMetaCallEvents.
We can allocate the memory for types and pointers to arguments in a
single block, starting with the space for the array of void*, followed
by the space for the array of integers to avoid byte alignment issues.
By pre-allocating the space that's needed by three arguments, we can
avoid all mallocs for the majority of QMetaCallEvents.
Until this change has propagated through qt5.git, we need to keep the
old API that is still used by QtDeclarative around. Once QtDeclarative
has migrated to the new API, it can be removed.
Change-Id: Id7359ffc14897237ea9672dabae9ef199a821907
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
If a project has DESTDIR and TARGET set to fixed values, then the
target paths conflict when doing debug_and_release builds.
With this change we're detecting this situation and yield a warning.
Fixes: QTBUG-2736
Change-Id: Ib163db3463322792ab9fa5b997285ac9fc9819ab
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
This adds a manual test for the QTextTable border logic.
Two HTML files are bundled as resources:
table-border-test.html: Contains various test cases for the border
logic.
table-border-test-header.html: Contains a test case for printing a table
with a repeated header.
The test application allows:
- editing
- previewing
- printing
- opening the HTML in the system browser (via temp. file)
It is possible to edit the HTML with "live preview" so new test cases
can easily be implemented.
Change-Id: Ic88488bc8b7dd74d5c03c3363f55840423462325
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
When I initially added it, it was ony for QCborValue, but I never added
the tests. Turns out there were two bugs:
[ChangeLog][QtCore][QBitArray] Fixed two bugs that caused QBitArrays
created using fromBits() not to compare equal to the equivalent
QBitArray created using other methods if the size was zero or not a
multiple of 4. If the size modulus 8 was 5, 6, or 7, the data was
actually incorrect.
Fixes: QTBUG-77285
Change-Id: Ife213d861bb14c1787e1fffd15b70573d162042c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
When calling QTextDocument::clearUndoRedoStacks() with UndoStack,
there were two bugs: The first was that we were retrieving
the item at "undoState" and deleting this. This is actually the
upper limit of the for loop. If the stack does not contain any
redos, then it would be == undoStack.size() and we would assert.
If there were redos, then we would delete the item at undoState
multiple times (actually undoState times).
In addition, when the loop exited, we first removed the dangling
pointers using remove() and then there was a weird resize() to
the new size minus the old undoState.
This would either assert because we tried to resize to a negative
number, or it would arbitrarily remove items from the stack.
[ChangeLog][QtGui][Text] Fixed a crash bug in
QTextDocument::clearUndoRedoStacks(QTextDocument::UndoStack).
Task-number: QTBUG-69546
Change-Id: I8a93e828ec27970763a2756071fa0b01678d2dcd
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Don't manage the ref-count yourself, as this requires the code to use
the QAtomic copy ctor, which we want to remove going forward. Using
QSharedData, we can let the compiler write the code for us.
Since 'ref' this way moves to the first spot in the list of effective
members, creating a 4B hole between itself and 'msecs', swap 'status'
and 'msecs' to fill the hole:
offset: 0 8 16 24
| | | |
without v v v v
adj.mnt: |*R*| | msecs | S | U | TZ....
before: | msecs | S | U |*R*| | TZ...
after: |*R*| S | msecs | U | | TZ....
This keeps the padding out of the critical first word, which improves
latency. That said, for accessing the members the old layout surely was
optimal. This layout optimizes copies and pessimizes access to 'msecs'
on 32-bit platforms without the Critical Word First optimization.
Requires adjustments to tst_toolsupport and the qhooks version.
Also default members using NSDMI, consequently drop the manual default
ctor.
Change-Id: I3c48e68694ad29b28a13aa47ea0f283fae52edd7
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For symmetry with QSize and QRect and because there were some users in Qt.
Port those users.
[ChangeLog][QtCore][QPoint/QPointF] Added transposed().
Change-Id: If4f23dbcf7d67983a6b1885e0d1d538115b49e2b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Amends 2e1763d83a.
The new range ctors need deduction guides, since the compiler can't
deduce the value_type from a pair of iterators.
Change-Id: I3ec1e5f91305b317c443b6a70246be416b55bad9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
some assumptions were incorrect: our test server immediately sends
its SETTINGS frame, as a result we have to reply with client preface +
SETTINGS(ACK). So QVERIFY(!prefaceOK) was wrong from the beginning and
was only passing by pure luck.
Change-Id: Ie43f0d4ac41deb0e5339badaae6149a9b2f9d9b3
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Adds setters for transfer-functions and primaries.
This allows us to remove use of private QColorSpace API from the PNG
handler.
Change-Id: Ieeff81c813c253649500acd1e53f35247b872325
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Replace our use of 'gamut' with 'primaries'. One is the axes of the
color space, the other the volume of representable values. For the
currently supported color spaces those are mostly equivalent, but when
we later add support for scRgb, this would be misleading as it has the
same primaries as sRGB but a much wider gamut, and we would like to use
the same primaries/"gamut" id for it.
Also few people would know what "the sRGB gamut" is, but
"the sRGB primaries" is easily googable.
Change-Id: I3348ccaae27a071ec77a4356331b9bbbf92e0d19
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
- Replace the usages of deprecated APIs by corresponding
alternatives in the library code and documentation.
- Build docs for deprecated APIs conditionally, based on deprecation
version. Remove the docs of methods deprecated since 5.0.0, these
methods are not compiled anymore.
- Modify the tests to make them build when deprecated APIs disabled:
* Make the the parts of the tests testing the deprecated APIs to
be compiled conditionally, only when the corresponding methods
are enabled.
* If the test-case tests only the deprecated API, but not the
corresponding replacement, add tests for the replacement
Task-number: QTBUG-76491
Task-number: QTBUG-76540
Task-number: QTBUG-76541
Change-Id: I6aaf0a1369c479fb880369a38f2b8e1e86b46934
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
- No need to use QSignalMapper here, replace its uses with lambdas.
- Replace index 'for' loop with iterator loop, to simplify the code.
Change-Id: Ide3d2db99a074c0233eb5c2fd7a9b217d804973f
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
One of the tests above was unsetting a variable that enforces
the use of a temporary keychain. We have to set it back, otherwise
the test is failing. What surprises me though - why I had this
problem only locally and not on CI? Apparently, SecureTransport
is not covered by our configurations ...
Change-Id: I0ff1e3e304632869391ed61213c245b949d8c778
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Done-with: Sona Kurazyan <sona.kurazyan@qt.io>
Change-Id: I5b584cbe468429c53c2d661a0d7957d74e7ad691
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Somehow missed these during my first iteration.
Change-Id: Iaef0ab84d9320a98f49ec071c93cd6f2907d92c3
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
For some reason, the overload resolution of the
High DPI scale() functions introduced by
b6ded193ee chose the
wrong overloads for QPointF and/or QPoint; it fell
back to the generic template intended for qreal,
QSize, etc, ignoring the origin. Remove the
template and spell out all overloads.
Fixes: QTBUG-77255
Change-Id: I5661f16f7326f65156f646f430f5a0c71d5302d2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This change removes the leftovers form other cleanup commits.
Task-number: QTBUG-76491
Change-Id: I61440f87c5a280f9666b78e19aac4d8ac603767e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
In two cases, we now detach. ¯\_(ツ)_/¯ This is test code.
Change-Id: I244f5e20dd923281049f38b76366163c16b6498c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Add missing implicit size checks of tags by passing the already checked
explicitly given size forward.
Also adds my fuzzing test for the ICC parser as it is security critical,
by being used by multiple image formats.
Change-Id: Ieb632ccb78f9b445a276959ffbd66fa04a7a5b45
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
The newly introduced clear() method left the path in an undefined
state: d_ptr allocated, but no elements. The elements vector is
otherwise never empty, since ensureData() inserts a dummy initial
moveTo element.
Fix by making sure that clear() leaves the path in the same state as
ensureData() (i.e. "empty" but not "null"), except possibly more
capacity allocated in the elements vector.
Fixes: QTBUG-76534
Change-Id: I7ad8b312913f5eb6e22023f5d2fd873e54b1e23c
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Leftover from the migration to QColor as color clear value.
Change-Id: Ibf49d65234a1e14d53035b46249753a5929ca22b
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
The Quick render loops do SkipPresent occasionally, and it all seemed
to work with the threaded one because we lack an autorelease pool on
the SG render thread. (to be corrected separately) The basic one ended
up crashing sometimes, however. Holding on to the drawable is incorrect.
Fixes: QTBUG-76953
Change-Id: I0d0ec6d09aa209d2c848d7a9dbd9b15916fe23ab
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Commit 8010e906d3 accidentally ended up
removing the removal-on-undefined-insertion check by calling insertAt
instead of insert, which had it. This patch moves the check back into
setValueAt.
Change-Id: Ic381e284d3da37e31c4eb29f79dfab9c55c2e3e9
Fixes: QTBUG-77204
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Instead, use (void)x; directly.
The current use of Q_UNUSED(x); generates warnings for an
empty statement the expansion of Q_UNUSED contains a semicolon
already.
Emitting Q_UNUSED(x) without the extra semicolon would be
an option, too, but as the future of Q_UNUSED's embedded
semicolon seems unclear right now, avoid its use altogether.
The change affects only generated code that's barely ever
read by a human, so the overall utility of "improved readability"
of Q_UNUSED in that place is questionable anyway.
Change-Id: I332527ed7c202f779bd82290517837e3ecf09a08
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
Task-number: QTBUG-72587
Change-Id: Id82e103d4076fed63c871385b2b0f21c04735d00
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QApplicationPrivate::focus_widget became a dangling pointer
in the following scenario:
A widget first gets focus and later on gets a focus proxy.
QApplicationPrivate::focus_widget was still pointing to the initial widget.
Upon destruction, QWidget::hasFocus() [which follows to the focus proxy
and then compares with focus_widget] was therefore false for both
widgets. So QWidget::clearFocus() didn't call
QApplicationPrivate::setFocusWidget(0) for either of them. As a
result, focus_widget remained set, and became dangling.
In real life, this happened with a QWebEngineView, which the application
gave focus to upon creation. At that time it doesn't have a focus proxy
yet. That happens later, in QWebEngineViewPrivate::widgetChanged.
https://bugs.kde.org/show_bug.cgi?id=381793
Change-Id: Ifee610bb76a2d4d2797b98ece9bffe5fffe3c6a6
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QImage comparison has always ignored differences in
metadata. Introducing colorspace comparison can break backwards
compatibility, as not all image formats or handlers have colorspace
capability.
This partially reverts commit
733ca2230c.
Fixes: QTBUG-77205
Change-Id: I1d525a9727e84502624cd118f503eec7be306c99
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Now that all our supported compilers know char16_t, we no longer need
QStringViewLiteral, whose only purpose in life was to turn u"" into
L"" for MSVC < 2015.
Change-Id: I25a094fe7992d9d5dbeb4a524d9e99e043dcb8ce
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Passes locally, and there is no reason why it shoulnd't. Use IPv6
addresses for Google and Cloudflare DNS servers, and as with the IPv4
tests, rely on Python and (as a fallback) nslookup to produce the
reference.
Change-Id: I584f8ae9bc89c66a1f59d7b1e7493d0ed8033e8a
Fixes: QTBUG-22287
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The test instantiated and deleted a model in each test which is
wasteful since not all tests use it. Remove it and introduce per-test
variables instead.
Task-number: QTBUG-76493
Change-Id: I1684ea5b8eac7b52bb99e830f723693c51e8b9a5
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Lookups performed via QHostInfoRunnable must not synchronously call
the user-code's receiver objects, as that would execute user-code in
the wrong thread. Instead, post a metacall event through the event
loop of the receiver object, or the thread that initiated the lookup.
This was done correctly for the trivial cases of empty host name or
cached results, so the code generally existed. By moving it from a
global function into a member function of QHostInfoResult, we can
simply access the required data to construct and post the event.
As we process that posted event, we need to check that the context
object (which is already guarded via QPointer) is still alive, if
we had one in the first place. If we had one, and it's deleted, then
abort.
[ChangeLog][QtNetwork][QHostInfo] Functors used in the lookupHost
overloads are now called correctly in the thread of the context object.
When used without context object, the thread that initiates the lookup
will run the functor, and is required to run an event loop.
Change-Id: I9b38d4f9a23cfc4d9e07bc72de2d2cefe5d0d033
Fixes: QTBUG-76276
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
- Use nullptr
- Instantiate test helpers on the stack or use QScopedPointer
- Remove C-style casts of enumerations/flags, use meta types
- Port to Qt 5 connection syntax
- Fix static method invocation
- Use initializer lists for QStringList
- Introduce a logging category for all debug output
- Streamline code
- Refactor cleanup() to operate on QFileInfoList which is faster
and streamline
- Remove unused variables
Task-number: QTBUG-76493
Change-Id: I3a033af7c9ec4dac3149d2016104daad07797a4f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
QNetworkAccessManager::connectToHostEncrypted()/connectToHost()
creates 'fake' requests with pseudo-schemes 'preconnect-https'/
'preconnect-http'. QHttp2ProtocolHandler should handle this
requests in a special way - reporting them immediately as
finished (so that QNAM emits finished as it does in case of
HTTP/1.1) and not trying to send anything.
We also have to properly cache the connection - 'https' or
'http' scheme is too generic - it allows (unfortunately)
mixing H2/HTTP/1.1 in a single connection in case an attribute
was missing on a request, which is wrong.
h2c is more complicated, since it needs a real request
to negotiate the protocol switch to H2, with the current
QNetworkHttpConnection(Channel)'s design it's not possible
without large changes (aka regressions and new bugs introduced).
Auto-test extended.
Fixes: QTBUG-77082
Change-Id: I03467673a620c89784c2d36521020dc9d08aced7
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This commit re-applies commit f8efe8e0c9,
which was lost in the recent tools → text changes.
Change-Id: I03ce35fcb89840e5607776d67578fb75b66f6eb2
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Take color space into account when comparing images, and fix gamma
comparison that was trying to be too accurate.
Change-Id: I3674653abb21b66aaacb557addc4afb4ee75cfdd
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Deprecated APIs of sql lib are used only in tests. This change
makes sure, that the tests build and pass with those deprecated APIs
removed or disabled, by:
- Making the parts of the tests testing the deprecated APIs to be
compiled conditionally, only when the corresponding methods are
enabled.
- If the test-case tests only the deprecated API, but not the
corresponding replacement, added tests for the replacement.
Task-number: QTBUG-76541
Change-Id: I93ed6ff92c7aa7af2c106b1a9d92d3704c7d9105
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Deprecated APIs of network lib are used only in tests. This change
makes sure, that the tests build and pass with those deprecated APIs
removed or disabled, by:
- Making the parts of the tests testing the deprecated APIs to be
compiled conditionally, only when the corresponding methods are
enabled.
- If the test-case tests only the deprecated API, but not the
corresponding replacement, added tests for the replacement.
Task-number: QTBUG-76541
Change-Id: I78c4913155007fd1d0df2c38e1b9a8b80066adeb
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Imports were expanded in the list of commands every time they were
evaluated. This meant any test with imports ran slower and slower the
more iterations it got through.
Fixed by creating a new PaintCommands object every time and living with
initialization of it being part of the benchmark results.
Change-Id: Ib53a3a25f1393437452bc5aede04ccb63e8715a6
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Also optimized the existing QL1S overload of non-const operator[](), and
applied Extract Method refactoring to the other existing QL1S overloads.
[ChangeLog][QtCore][QJsonObject] Added insert(), remove(), and take()
overloads taking QLatin1String.
Change-Id: I5e737cf2d7d9ffb325d6981db1e4a6a9f093657b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
[ChangeLog][QtCore][JSON] Added overloads of functions taking key
strings as QStringView; in QJsonObject, QJsonValue and QJsonDocument.
Change-Id: I78b40aba8200003acfae257ff06f5f15737005e7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
When successfully finishing a parse, it's reasonable to expect that the
QIODevice was advanced to the end of the input data.
[ChangeLog][QtCore][QCborStreamReader] Fixed a bug that caused the
QIODevice that the data was being read from not to show the entire CBOR
message as consumed. This allows the user to consume data that may
follow the CBOR payload.
Fixes: QTBUG-77076
Change-Id: I1024ee42da0c4323953afffd15b23f5d8fcc6f50
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
If QImageReader recognized the suffix of a file, it would by default
not check if the file contents matched the claimed format. Hence, a
valid but misnamed image file would fail to load.
Fix by adding contents check for suffix-recognized files.
[ChangeLog][QtGui][Image] Loading of image files having a file name
suffix for a different image file type has been fixed. QImageReader
will now ask the suffix format handler to confirm the file contents
(canRead()), and fall back to normal file content recognition on
failure. This implies a slight behavior change in
QImageReader::loopCount(), ::imageCount() and ::nextImageDelay(): For
an unreadable file with a recognized suffix, they would earlier return
0, while they now will return -1, i.e. error as per the documentation.
Fixes: QTBUG-42540
Fixes: QTBUG-68787
Change-Id: I205e83f29ed7190cbcae95dab960232544d012f6
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
warning C4573: the usage of 'tst_QNetworkReply::connect' requires the
compiler to capture 'this' but the current default capture mode does not
allow it
Change-Id: Ic9fd526fedf7c52e53e2b1136834c10bf4cd0ea9
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
It's not implemented
Change-Id: I56abb0a5fe0e6d5c2f5f678adadafed395456902
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
1. Use per-case QNAM objects
2. In a slots (connected to QNetworkReplies) - if an error detected - stop
the event loop (no reason to continue waiting) and then do normal
QVERIFY/QCOMPARE things.
3. In tests, check QTest::currentTestFailed after the event loop returned -
if an error was detected by a slot, no need to continue with QCOMPARE/QVERIFY
in the test itself.
Task-number: QTBUG-77053
Change-Id: I3827a629a2749becd3dc6eee7fd6994d96441e65
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Applications might receive paths with Windows' '\\?\' markers, which
indicates a long path to Win32 APIs, when the application is opened by
explorer via file association. Qt not ignoring those markers will fail
to open such files.
By stripping the marker in QDir::fromNativeSeparators, QFile, QFileInfo
etc automatically are able to handle such paths. QDir::cleanPath is
also documented to normalize separators, so it needs to be done there
as well.
[ChangeLog][QtCore][QDir] Remove Windows specific long path markers
when handling file paths with native separators.
Change-Id: I526a890614edee8c85b39fc12c98e7ddb6e0d793
Fixes: QTBUG-75117
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Current codebases assume isCompressed() implies ZlibCompression, since
there was no compressionAlgorithm() getter. In order to force codebases
to change, deprecate isCompressed() and force handling of the algorithm.
The replacement API is being introduced in 5.14, which is why the
warning is being emitted in 5.15 only.
Change-Id: Ief874765cd7b43798de3fffd15a9f5d978951ea5
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Windows has a problem relating to cross-DLL variable relocations: they
are not supported. Since QMetaObject's link to the parent class is done
via a pointer, every QMetaObject in a DLL or in the EXE that derives
from a class from another DLL (such as QObject) will be dynamically
initialized.
This commit changes the meta object pointers in QMetaObject::d from raw
pointers to a wrapper class SuperData, which is almost entirely source-
compatible with the pointer itself. On all systems except for Windows
with Qt 6, it's binary compatible with the current implementation.
But for Windows with Qt 6, this commit will store both the raw pointer
and a pointer to a function that returns the QMetaObject, with one of
them non-null only. For all meta objects constructed by moc, we store
the function pointer, which allows the staticMetaObject to be statically
intialized. For dynamic meta objects (QMetaObjectBuilder, QtDBus, QtQml,
ActiveQt), we'll store the actual raw pointer.
[ChangeLog][QtCore][QMetaObject] Some internal members of the
QMetaObject class have changed types. Those members are not public API
and thus should not cause source incompatibilities.
The macro QT_NO_DATA_RELOCATION existed in Qt 4 but was called
Q_NO_DATA_RELOCATION and only applied to Symbian. It was removed in
commit 24a72c4efa ("qglobal: Remove
symbian specific features").
Task-number: QTBUG-38876
Fixes: QTBUG-69963
Change-Id: Id92f4a61915b49ddaee6fffd14ae1cf615525e92
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Caused by commit 01301b0b34, which made
vector.resize(vector.size()) not to detach, which was used by fill() and
assumed that detaching happened. The test does not test the resize()
behavior, only that fill() is not broken anymore.
[ChangeLog][QtCore][QVector] Fixed a regression that caused fill() not
to detach, corrupting shared copies.
Fixes: QTBUG-77058
Change-Id: I6aed4df6a12e43c3ac8efffd15b1b527a8007bf3
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
fix the bloody test for good - the idea to have a shared QNAM (shared
by test cases in this test) was somewhat wrong to start with.
Fixes: QTBUG-77053
Change-Id: I5755e96ec988e2dd546f527f3f902fc43914b0b7
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
As in QVarLengthArray (c34242c679), this will
probably bite someone someday, so fix it before there's a bug report.
Use ctor delegation to keep code size increase small.
There's also the benefit that default-constructing a QNetworkRequest now
no longer creates an expensive QUrl object just to destroy it unused again.
Add an auto-test.
Change-Id: I5ceb5402ca3946048d695244d1b1c36564a1e80a
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Don't call realloc() with all its machinery when we know exactly what
to do: destroy the last element and decrease the size by one.
Extend the test, removing the unused Foo class for a new Tracker one.
Change-Id: I568eef4f6335669689fb16fd23af92cb4d6464bd
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
- Replaced the usages of deprecated APIs by corresponding
alternatives in the library code and documentation.
- Modified the tests to make them build when deprecated APIs disabled:
* Made the the parts of the tests testing the deprecated APIs to
be compiled conditionally, only when the corresponding methods are
enabled.
* If the test-case tests only the deprecated API, but not the
corresponding replacement, added tests for the replacement.
Change-Id: Ic38245015377fc0c8127eb5458c184ffd4b450f1
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The public QWidget::create still has them, but we don't need to
propagate them on - that just makes debugging the window creation
flow harder.
The window argument to QWidget::create is technically used to
guard an early exit in the function, but to keep behavior the
same we leave it for now.
Change-Id: Ic0287575aa25f1272e216adc1b75e34d6f55f6d9
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
In Qt 5.0, delta() and orientation() were already marked obsolete,
but Widgets and tests have kept on depending on them all this time.
We now start using alternative API so they can really be deprecated.
All constructors except the newest one are also deprecated.
The plan is for all events from pointing devices to have
QPointF position() and globalPosition(), so we deprecate
the other position accessors.
[ChangeLog][QtGui] Obsolete constructors and accessors in QWheelEvent
now have proper deprecation macros. What is left is intended to be
compatible with planned changes in Qt 6.
Change-Id: I26250dc90922b60a6ed20d7f65f38019da3e139e
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QLinkedList is still used in several tests. Add exceptions for
these subdirs.
Change-Id: I50ccd2a0892129d4a47aa4e2400211690da9a82d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Conflicts:
configure.pri
Also required s/solid\.color/solidColor/ in a couple of places in:
src/gui/painting/qpaintengine_raster.cpp
Change-Id: I29937f63e9779deb6dac7ae77e2948d06ebc0319
There's like three pages of this when compiling the test :)
Change-Id: I923f2c4f5eff7c709977026666cc5b2a2cbfaa72
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The call to QFileDevice::unsetError() in QSaveFile::open() does
not clear QSaveFilePrivate::writeError. Clear it in addition.
Fixes: QTBUG-77007
Change-Id: I5e5009750f1726d1c74c1b4eb1c33f3a5393fe4f
Reviewed-by: David Faure <david.faure@kdab.com>
Change-Id: Ifecb1bac475512241de9bcf195955409bb3adaff
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
The previous code handled only some error codes, in a very inefficient
way, for some code paths. This change standardizes error handling using
a helper function that maps winsock WSAE* codes to Qt error codes.
The test for connecting to unreachable hosts or ports is now more
generic, and enabled on Windows, where it passes in local tests,
but dependency on network configuration still makes it fragile,
so ignoring some failures without completely skipping the test.
[ChangeLog][Network][Windows] Correctly emit errors when trying to
reach unreachable hosts or services
Change-Id: Icaca3e6fef88621d683f6d6fa3016212847de4ea
Fixes: QTBUG-42567
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It's not done by toWCharArray. This caused some issues as we were using
API requiring a null-terminator. wcslen for instance was measuring the
string as being millions of characters long, causing fairly quick
crashes when appending.
Change-Id: Iedaaf9f195be22a610543ab649da92a87cb71973
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Counting absolute paint events is fragile, as there are no guarantees
that a single call to QApp::processEvents only delivers a single paint
event to a widget. As of QTBUG-76566, we see that the items occasionally
receive three calls to paint, which can be simulated by activating other
windows while the test is running and waiting for events to be
processed.
Instead, verify that we do receive any paint events as the first test,
and then verify increments when we expect updates.
This also reverts change 24b9424adc.
Change-Id: Ib51853e918f31acd3aea10d4109c95f34012a29f
Fixes: QTBUG-76566
Reviewed-by: Dimitrios Apostolou <dimitrios.apostolou@qt.io>
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
The QTest::mouseMove calls are not reliable, and seem to produce
flakiness, at least on WinRT. Removing them, and only depending on
handling of the synchronously delivered QMouseEVent for simulated
mouse moves.
Also, initialize the expected cursor shape from an empty scene;
this avoids that showing the view with the cursor accidentially
on an item results in the wrong default shape. Remove hard
coded coordinates, just test what we know.
Fixes: QTBUG-73545
Change-Id: I6f81d6b16bb613ec77aaa776d6a80aac739aeb58
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When accidentally running a test doing screen-grabbing
with High DPI scaling active, sizes of the obtained pixmaps
can differ due to the device pixel ratio. Add a check to make that
clearer.
[ChangeLog][QtTestLib] Comparison of QImage, QPixmap now checks for the
device pixel ratio.
Change-Id: Id8d5187e99c565c44a7bfb8b9cfb09737815fb15
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
As with widgets, items that are disabled should not receive any input
events.
Similar to QGraphicsScene, which ignores disabled items when handling
mouse presses, the view should also ignore them when handling mouse
moves to update the cursor.
Since QGraphicsView only adjusts the cursors on mouse moves, reenabling
an item that is currently under the mouse will not change the cursor.
This is consistent with other changes of item attributes that would
position the item under the mouse (such as moving it). The overhead of
hit-testing items for every such attribute change would be too large,
and applications can generate a mouse move event if they really need
to adjust the cursor in all situations.
[ChangeLog][QtWidgets][QGraphicsView] Ignore disabled items when setting
the mouse cursor.
Fixes: QTBUG-76765
Change-Id: Ifcd31fc0581e8421e58eeb436a55b031909eed7e
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The tests send QEvent::MouseMove events to the view, but don't fully
construct the event with both local and global position. Consequently,
QMouseEvent will use QCursor::pos as the global position, which is
unreliable, as QTest::mouseMove can not guarantee that the mouse really
moves - when running the tests locally on e.g macOS, it never does.
So instead construct the QMouseEvent with the trivially calculated
global position.
Change-Id: Ic4c914e3af7f15751545080d4743b06d3887cce8
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
These tests have not failed on the removed platforms for at least 60 days
Task-number: QTBUG-76608
Change-Id: If7a9f4db907124e3cd54e3f4b0ad3e20717d1912
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Simplistic console application with one test for each of the two
classes. Simply tests that we receive the signal when the connection
is disrupted in some way.
This patch also exports the classes for tests/developer builds
so that we can actually link with them.
Change-Id: I8066312274350984110c3f3ad3e94854adca7c2a
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QNetworkSession has a concept of UsagePolicy which can disable
background* transfers to conserve battery or bandwidth. However, it is
only possible to change the policy through
QNetworkSessionPrivate::setUsagePolicy which currently doesn't have any
callers outside of our auto tests.
*background = transfers not initiated directly by the user, but needs
to be marked as such by the application developer.
Change-Id: I92c4abccaca040612b4795abe7c52d68a2d21749
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
That's how CommonMark specifies it. The HTML codec-guessing algorithm
was making it fall back to Latin1 in practice, which was screwing up
any Unicode characters found in the markdown source.
Change-Id: I4021adc4a68591ecfd56ef24971af53ce3e9c96d
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Some compilers (hello, MSVC) do not produce literal types in Qt
because their constexpr support has been blacklisted.
Therefore, amend the check for literal types in Q_ARRAY_LITERAL:
only do the check if the compiler supports constexpr.
Change-Id: I7cffe00dde447d975aa6a7d02248df9c351508ff
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
In all of these cases, the effect of the change is local to one file.
Change-Id: I3bda3aadee3b42e7797183c2330183390b92d1f2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Move the recursive mutex use case out of QMutex into a separate class,
unsurprisingly called QRecursiveMutex. As an immediate benefit, 90% of
the QMutex users now enjoy a constexpr QMutex ctor.
This change prepares for a real split in Qt 6, so that both use-cases
are no longer bundled up in one class.
[ChangeLog][QtCore][QMutex] Added QRecursiveMutex as a replacement of
QMutex(QMutex::Recursive).
Change-Id: I79b8724e8a8ee65e4bd0f06acd76103fe4197b8c
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When I added the QEXPECT_FAIL the http proxy was the only one.
That's no longer true after fixing the SOCKS proxy, so let's make the
condition more specific.
Change-Id: I1eaa5117d5d0219e04cbd091ec54e522fe7b5509
Reviewed-by: Dimitrios Apostolou <dimitrios.apostolou@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
- Replaced QOperatingSystemVersion::WindowsVersion,
QSysInfo::windowsVersion(), QSysInfo::macVersion(),
QSysInfo::MacintoshVersion with QOperatingSystemVersion::current().
- Added QOperatingSystemVersion::WindowsVista for convenience, as it
is used in lots of places.
Change-Id: If9c4ac496005b2e70b5c70be160747afa74b98c1
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
- Replaced the usages of deprecated APIs of corelib by corresponding
alternatives in the library code and documentation.
- Modified the tests to make them build when deprecated APIs disabled:
* Made the the parts of the tests testing the deprecated APIs to
be compiled conditionally, only when the corresponding methods are
enabled.
* If the test-case tests only the deprecated API, but not the
corresponding replacement, added tests for the replacement.
Task-number: QTBUG-76491
Task-number: QTBUG-76539
Task-number: QTBUG-76541
Change-Id: I62ed4a5b530a965ec3f6502c6480808f938921aa
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
... except for tests, which manually undefine the macro.
Like QT_NO_FOREACH, this is a technical way to keep JSI-free
modules JSI-free going forward.
Change-Id: Icf1342da00a700f42f9e32a253d1cdb94c38dd7e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
