A scheme is required to be able to run tests through Xcode, even from the
command line, but Xcode doesn't auto-generate the schemes until launched
as an application. Xcode also auto-generates schemes for all our targets,
but we only need one for the primary application target.
Change-Id: Ia42f3825aba3ffde3be93be55e165d6284434853
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Change-Id: I2e58c22301a433208718c26b362b4dda2b891f0e
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
The latter location resulted in the wrong SDK paths being resolved if
sdk.prf was loaded before default_post.prf through an explicit load(sdk)
call.
Change-Id: Ia443260572fbdf5f9ed1daf558c2962703274e32
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
If the user adds CONFIG+=bundle and doesn't set QMAKE_BUNDLE_EXTENSION,
we interpret that as a request to generate a test bundle.
Change-Id: Id4fbb64d39cddd6f95ac641a910a9d5543c30daa
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Gives a stack-trace at the point the error was caused, making it easier
to debug what's going on.
Change-Id: I0d65bb5061e9a97c142d41f6c99a1a1803cbe82d
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Change-Id: I0928c4aaa0c308ee86b9611beeba3937b61e226c
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Add a command line parser so that the directory can be specified.
Resize depending on screen size and make first (name) column larger.
Change-Id: Ied5823b4e8f50345aae792628fb610b8604e37d3
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Add missing blanks and prevent line wraps
"...Qt\napplications.." for clarity.
Change-Id: I35932fb296ec47a1832f5c244b9719838621d5be
Reviewed-by: Iikka Eklund <iikka.eklund@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This allows one to check whether the conversion is successful without
checking for the return result, as the value of 0 represents the valid
IPv4 address 0.0.0.0.
Change-Id: I637fe55583f2255c85b0d955e5886b61494e0c7c
Reviewed-by: Richard J. Moore <rich@kde.org>
Unlike localhost (127.0.0.1), there's really no point in using
::ffff:0.0.0.0, since you shouldn't be sending packets to it. Linux
transforms 0.0.0.0 to localhost, but that's non-standard and won't work
on other OSs, so it's still a bad idea.
Change-Id: I5982b21bf953e11e04fc19893f94be90ed29089b
Reviewed-by: Richard J. Moore <rich@kde.org>
In 85136496bc, Shane made QHostAddress
automatically convert any IPv6 address that was v4-mapped to IPv4 in
QHostAddress. While that is an interesting trick, it prevents us from
being specific about what we want. On some OS (like FreeBSD and OS X),
the distinction is relevant, so keep it.
Moreover, it was inconsistent: it might fail depending on how the
QHostAddress was constructed and the order of comparison.
[ChangeLog][Important Behavior Changes] QHostAddress will no longer
convert IPv6 addresses of type "v4-mapped" to IPv4. To perform this
conversion manually, construct another QHostAddress with the result of
toIPv4Address().
Change-Id: I06afbc7018539804bb3044ef1fe6a49ac7a5f240
Reviewed-by: Richard J. Moore <rich@kde.org>
Start using signalfd where we can. Drop the crash (SIGSEGV, SIGBUS) handling completely.
The crash handling that was in place previously was not async-safe. It also prevented getting
a core dump. So just remove it. There is no safe solution for a single application process since
restoring the keyboard, video modes, etc. all need unsafe calls in the signal handler almost for sure.
We can however improve the handling of non-crash scenarios greatly:
Introduce support for SIGINT, allowing nicely and cleanly restoring the video
mode with the KMS backend when pressing Ctrl+C while QT_QPA_ENABLE_TERMINAL_KEYBOARD
is set.
Same goes for keyboard suspend (SIGTSTP, Ctrl+Z). When QT_QPA_ENABLE_TERMINAL_KEYBOARD is set,
platform plugins now have the possibility to act upon Ctrl+Z. As an example eglfs' KMS backend
is enhanced to handle this by restoring the video mode before suspending the process, and
reinitializing when brought into foreground again (SIGCONT).
SIGTERM is also handled. This is extremely handy when starting an application locally on the embedded
device and then kill-ing it via a remote ssh session. Keyboard and video mode is now cleanly restored.
Finally, when disabling the keyboard, try setting also KDSKBMUTE.
Change-Id: I2b3608dc23c798e2b39f74cb27f12dcb0e958435
Reviewed-by: Louai Al-Khanji <louai.al-khanji@theqtcompany.com>
It was already a user meta-type, so it only gets
promoted to internal.
[ChangeLog][QtCore] QPersistentModel index becomes an built-in
meta-type, including QVariant support.
Change-Id: I63d733d1eb66aa61691e7afce27fe7372a83ac00
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Q_ASSERT expands to:
do {} while (false && (<your condition>))
Which is fine for Clang as long as it's a macro. However, when you
compile as a preprocessed source, the macro is gone and Clang prints the
warning:
warning: code will never be executed [-Wunreachable-code]
do {} while (false && (f()));
^
note: silence by adding parentheses to mark code as explicitly dead
So add the parentheses that it's asking about.
The changelog refers to the full Q_ASSERT change from
ebef2ad136.
[ChangeLog][Important Behavior Changes] Q_ASSERT will now expand the
condition even in release mode when asserts are disabled, albeit in an
unreachable code path. This solves compiler warnings about variables and
functions that were unused in release mode because they were only used
in assertions. Unfortunately, codebases that hid those functions and
variables via #ifndef will need to remove the conditionals to compile
with Qt 5.5.
Change-Id: Ia0aac2f09e9245339951ffff13c8aa70229254d0
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Avoid invokeMethod on every cursor movement and use an event instead. This is more
lightweight and efficient. Also, there is no need to have a separate QObject just
for this.
Change-Id: I65ae202943eeb1e30cf22926576f84198f2487f8
Reviewed-by: Andy Nichols <andy.nichols@theqtcompany.com>
Calling applicationName() in the destructor of a global static (e.g.
via QLockFile) was working when calling setApplicationName explicitly
but otherwise it would suddenly return an empty string.
This led to inconsistencies, the application name switching from
non-empty to empty at saving-on-destruction time.
There was already a global static, used when setting the app name
explicitly before construction. Use it now to store the app name
in all cases (explicitly set, or fallback).
Change-Id: I71d3a0c40158f8bfd022c385b198346a2594b1cb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
ecf6e34efefcedbff0a457ed4b5e0f4e5d096b37 introduced new values to
specify icons in the manifest.
Change-Id: I8f0cc9790ffd2f50ed2008bc8bab053b3db4965e
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@theqtcompany.com>
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
eglfs does not depend on the device makespecs anymore when it comes to these device
integration backends (hooks). Instead, backends are autodetected by configure.
The name of the preferred plugin is still set in the device makespecs. This
is optional. When not set and there is more than one plugin present in the system,
the environment variable QT_QPA_EGLFS_INTEGRATION will have to be set at runtime.
In the absence of that, the order is undefined.
Change-Id: Ie1ced2c9aa1beff2adb13b4fdea7c499cb5a6aab
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Andy Nichols <andy.nichols@theqtcompany.com>
Failure to write into a successfully opened lock file left the
lock file with size 0 in the filesystem.
Task-number: QTBUG-44771
Change-Id: I561bf629b9f160174d658bf105be828f71d78ff9
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Change-Id: Ifc99af49398e5d6e057035d2de55fe218c8418d6
Reviewed-by: Andy Nichols <andy.nichols@theqtcompany.com>
Reviewed-by: Robin Burchell <robin.burchell@viroteck.net>
In QFontEngineMulti::stringToCMap() we call the primary engine's
implementation of the same function. If this engine does not support
the character in question, then it's supposed to clear the glyph array,
otherwise there may be left-over junk in the glyph array from previous
script items and the font selection algorithm will think it has already
found a match for the character corresponding to the glyph position.
The freetype engine, for instance, clears the respective entries
in the array when it gets a 0 glyph from the font engine.
In particular, this would happen when you had a ligature preceding
an item that was shaped separately. The ligature (e.g. "fi") would
set the first two slots of the glyph array, but later replace
them with a single glyph. The next item would then get an offset
of 1, i.e. pointing to the position in the glyph array where the
glyph for i was originally contained. If this was not cleared,
it would assume the primary engine supported the character. If
the character was of an unsupported writing system, then you would
get a box in place of it instead.
[ChangeLog][OS X][Text] Fixed appending text with a different
writing system and formatting to a latin ligature.
Change-Id: Id8c81cdc8e2d8994cc1a999769fcae452c4f52ae
Task-number: QTBUG-44708
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Change the shared pointer to store a QPlatformCursor instead of
QWindowsCursor, removing the dependency of qwindowsscreen.h on
qwindowscursor.h.
Change-Id: I8b4bbc9fd4d5046c30ac3784f14229a9cc6d8dc6
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
The Activity onResume function is always called before the application
gets initialized and we let the applicationState set to the default
value which is AppicationInactive.
Change-Id: Ifc3c7e3dfc51f2b821f8ca87f8b711f485b6a6f8
Reviewed-by: Peter Rustler <peter.rustler@basyskom.com>
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
When using default configure value (auto) for libudev + libinput and
libudev is not available, disabling libinput failed and it is enabled
even it requires libudev to work.
Change-Id: Ia2ead66c5cebc8658f2c29445f5c81c9f8b30dc8
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Until now it was mapped that way only under KDE and Gnome.
Task-number: QTBUG-44772
Change-Id: I65a425bb531909dff4110f086c9aee8ae7a747c6
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Moved to processKeyEvents() on all platforms except OS X.
Previously QWindowSystemInterface::tryHandleShortcutEvent() was called
from inside QWindowSystemInterface, this is considered unsafe as it
ends up calling sendEvent(). On some platforms the call might come from
a different thread then the receiver and cause an assert.
Task-number: QTBUG-44712
Change-Id: Ie80c698f63b9c3d9f52aa94380e539a84caea912
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
And add tests for the GCC intrinsics and for std::atomic.
Task-number: QTBUG-43794
Change-Id: Ic5d393bfd36e48a193fcffff13b9b2dbaee80469
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
If our socket is already of a given type (probably due to a previous
call to bind()), then constrain the incoming target address to be of the
same family. On some OSs, trying to send or connect to an IPv4 address
from an IPv6 socket will fail with EINVAL, even if the socket is not in
"v6only" mode.
bind() can't be called after already being bound, but the function can
still be called on a socket created by the user and passed on with
setSocketDescriptor().
Change-Id: I209a1f8d0c782c6b6de2b39ea4cfad74d63f3293
Reviewed-by: Richard J. Moore <rich@kde.org>
This has been known to be broken for a while. Now it works: you can bind
and you'll retain the port (and the file descriptor) for the connect
call. Incidentally, in fixing the binding for more than one IP for the
hostname (with event loop), this commit fixes the setSocketDescriptor
XFAIL.
[ChangeLog][QtNetwork] Fixed a bug that caused both QTcpSocket and
QUdpSocket to close the socket and lose any bound ports before
connecting. Now bind()/setSocketDescriptor() followed by connect() will
retain the original file descriptor.
Task-number: QTBUG-26538
Change-Id: I691caed7e8fd16a9cf687b5995afbf3006bf453a
Reviewed-by: Richard J. Moore <rich@kde.org>
invalid conversion from ‘unsigned char**’ to ‘const unsigned char**’
Task-number: QTBUG-44744
Change-Id: I6263db106fe28c6aa04db8ca79421b3a9fc5adc9
Reviewed-by: Richard J. Moore <rich@kde.org>
If a QWindow has never been shown, it has no platformWindow (it's null).
So it's a valid condition and we need to be sure that the pointer isn't
null before dereferencing it.
Task-number: QTBUG-44766
Change-Id: Ia0aac2f09e9245339951ffff13c7eb024d6a0773
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Removes the non-templated pixellayout methods that were used for
non-c++11 builds, and instead initialize with the templated ones
verbatim.
These versions are faster, and using only those removes duplicate code.
Change-Id: I91a7d9122d2601ad282287a2f5ed6b88877d52fb
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
As QAIM and related classes are becoming more useful in the QML
environment, it makes sense to make these invokable.
Make the access API and the setData method scriptable. Avoid
making the structure changing APIs scriptable now to be conservative.
Export the ItemDataRole enum through the staticQtMetaObject to make
built-in roles available.
Change-Id: I47b1682e6fa8ba32c7314c73fc10a7bbaa6d1f98
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
Reviewed-by: Stephen Kelly <steveire@gmail.com>
QML code like this should be possible:
Text {
text: selModel.selection.contains(modelIndex) ? "blue" : "yellow"
}
If the selection is just a Q_INVOKABLE method, then all consumers need
to set up
Connections {
target: selModel
selectionChanged: foo()
}
That is obviously not the API we want (made more clear by the fact that
the signal is already perfectly named) because it is not declarative but
it can be. So, make it declarative by making selection a property.
Change-Id: Id1a05ae9b91e45e6d462bea4272b8740571e9fc3
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
Moc doesn't have the built in defines that clang has, so we need to
hard-code some of these so that moc resolves the Q_OS_IOS define
in the end, based on qsystemdetection.h and TargetConditionals.h
Change-Id: Id9a7f870b940f99f27c55a2a887d0ce93217b821
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Due to common subexpression elimination instruction set extensions may
leak from the objects where they were enabled when doing link-time
optimizations.
To avoid that this patch disables LTCG/LTO on files built with extra
instruction set extensions.
Change-Id: Ie34ad900be7fb04a0dc4d3562187ee170c183333
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If the coordinates were too close (at the limit of the number
accuracy), the splitting algorithm in QBezier::shifted() would never
finish. Ref. testcase in bugreport.
Task-number: QTBUG-44674
Change-Id: I2a575cdc6284504ef5e3eb2b749857576fe433c3
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
www.example.com is a reserved domain (RFC 6761), but IANA is running a
web server there. As for www.foo.com, that also exists, is a real
website and is often content-filtered in corporations (it triggers a
firewall warning for me -- "You attempted to visit a site that is in
violation of Intel acceptable use guidelines").
So use a localhost instead, since we don't actually need to connect to
the servers to do the work. And since we don't need to connect, I chose
port 4 as it's extremely unlikely someone is running an HTTP server
there (/etc/services lists it as unassigned).
Change-Id: Ia0aac2f09e9245339951ffff13c82439c6d5f945
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Improves the conversion from RGB888 to RGB32 on platforms without SIMD
versions. This includes the fallback used on non-neon ARM devices.
Besides image conversion the routine is also used for decoding JPEG.
On x86 this version is within 0.7x of the speed of the SSSE3 version.
Change-Id: Id131994d7c3c4f879d89e80f9d6c435bb5535ed7
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
[ChangeLog][QtCore] Q_ENUMS and Q_FLAGS have been deprecated, and replaced
by Q_ENUM and Q_FLAG macros. These two new macros automatically register the
enum with the Qt metatype system, allowing automatic conversion to or from
string in QVariant, or to show the strings by QDebug operators. They also
enable the new QMetaEnum::fromType function.
Change-Id: I80cccd7ad3fc46b11aee2fe50681a8126debf972
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
There's no need to decode the event details here anymore, and anyway
this had a bug: it always said the device is unknown.
Change-Id: If99dddbe2136d95e818f4fe526f62650cbd7c1ca
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
