- turn CursorHandleShowMode in a QFlag for better control
- add ScopedValueChangeBack which is useful to control m_blockUpdateSelection
- implement longPress word selection
Change-Id: Ieed709644db991e10077d5be5d5a59f16f4fc3a8
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Makes the naming of QPA logging categories the same across different
platforms, which makes it easier to debug an unfamiliar platform.
Change-Id: I60ed34892d154e86723c8e4bcff3c28fcab1f7a1
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Some tests are not written to handle running on a retina screen,
resulting in additional test failures when trying to fix a CI test
failure on a local retina-enabled machine.
Change-Id: I0fed33c38792b686ac83abba2bfbc45623382200
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The Test Anything Protocol (TAP), was originally Perl's simple text-based
interface between testing modules and test harnesses, but has since been
adopted by a large number of producers and consumers in many different
languages, which allows colorizing and summarizing test results.
The format is very simple:
TAP version 13
ok 1 - test description
not ok 2 - test description
---
message: 'Failure message'
severity: fail
expected: 123
actual: 456
...
ok 3 - test description # SKIP
1..3
The specification [1] is very brief, so the implementation has been
based on how typical consumers behave, especially when it comes to
the undefined diagnostics block.
[1] http://testanything.org/tap-version-13-specification.html
Change-Id: I616e802ea380165c678510e940ddc6607d39c92d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Using QFileInfo to check if the file exists based on the filename
alone ignores the fact that all the expected files are embedded
as QRC resources.
The expectedResult() function already does a similar check, so we
can use that directly instead of checking twice if the file exists.
Task-number: QTBUG-66981
Change-Id: I0beb8d3503ed49682ae7d7e2a5172922fab5420d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Also makes the qt_rectfill_quint16 actually work with any uint16 format
Change-Id: Ibb3deed54ee1a0a86b14d5349c95f106ced057f7
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
The generic one is better optimized and faster at this point.
Change-Id: Ie7eef2402265183ef4d27a7f0eab5dc801beba7a
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
When the source model of a QSortFilterProxyModel has rows removed, a
mapping is performed in order to figure out which corresponding rows in
the sorted and filtered view of the model are affected. In doing so it
constructs a vector of removal intervals which are subsequently used to
emit rowsRemoved signals. In the case where many rows are removed (e.g.
all of them), many removal intervals are identified that are often
adjacent and could be simplified, which is what this patch does. i.e.
instead of emitting 3 rowsRemoved for 0-3, 4-6, 7-12, now a single
rowsRemoved is emitted for 0-12.
Change-Id: Ia503091cc4928378c88257cd8b431582e9ff454e
Reviewed-by: David Faure <david.faure@kdab.com>
There was a superfluous ';' at the end of main. No compiler will
complain I guess but the examples should be syntactically correct.
Task-number: QTBUG-55128
Change-Id: I2ddc3041ed05106d04fb4f4ad74735c72c9ddb26
Reviewed-by: André Hartmann <aha_1980@gmx.de>
This is done in QAction::event(), not eventFilter().
Change-Id: Idc5d7864d259dcf035543c40c8e7b6acd86bde9b
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
QRasterPaintEngineState::flags.non_complex_pen was not initialized in
the ctor which leads to valgrind warnings. Initialize it to false - the
correct value is set within update/ensurePen() before it is really used.
Task-number: QTBUG-66615
Change-Id: If154873ad89903c243662ab1f140f74434a6f88c
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Set the color buffer depths on the PIXELFORMATDESCRIPTOR for
the fallback code path (-platform windows:gl=gdi).
Task-number: QTBUG-66797
Change-Id: Idccd94fdf121803af1c19e34cc86b6f06ca88d90
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
The Q_GADGET macro cannot be used in templates. It can however be useful
to derive a template class from a Q_GADGET enabled base class to benefit
from type safety features in C++ (e.g. the class could represent an id
or handle for some C++ type).
For proper wrapping of a QVariant with a gadget value in a QJSValue, the
QMetaType::IsGadget flag must be set for the registered template
instance type - which does not happen prior to the fix because
IsGadgetHelper requires qt_check_for_QGADGET_macro to be defined in the
registered class but not in an ancestor class - in other words: The
class must declare Q_GADGET.
To overcome this, IsGadgetHelper/IsPointerToGadgetHelper can now
differentiate between a Q_GADGET flagged class (allowing
automatic registration) and a derived class, e.g. a template class
(forcing Q_DECLARE_METATYPE to be used explicitly).
[ChangeLog][QtCore][QMetaObject] It is now possible to use template
class instances inheriting from a Q_GADGET in Qml
Task-number: QTBUG-66744
Change-Id: I7632ad45cff79fa422b3f852ca0b963f35fab155
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Instead of keeping a static list in a qrc file.
Change-Id: I7783db5cad5929cc3f449889e1cbcbb87f7f2637
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
QtTestLib uses its own message handler for plain text logging, so it doesn't
go though the logic in qDefaultMessageHandler that dispatches logging to
alternate logging sinks.
Building on the approach of Android and Windows, we log to AUL from the
plain text logger. A future improvement in this area would be to make
QtTestLib make more use of the infrastructure in qlogging.cpp, but this
is a bigger task and requires a better overview of the requirements.
The AUL code has been isolated into a wrapper, to allow logging both
to AUl and to e.g. the QPlainTextLogger. This is needed so that we
short circuit the plain text logger in case AUL already has handled
printing to stderr.
Change-Id: Iee0c3902190bd081b7ffbaf77c41b3118ce7f6da
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The check on line 972 says lcQpaXInputEvents().isDebugEnabled() so
that debug output was always showing "from 0,0" due to
lastScrollPosition not being set.
Change-Id: I345732e36db05108f70474261c47e78333b57d30
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Divide the whole FP1616 value by 0x10000 instead of dividing
the integer part by 0x10000 and the fractional part by 0xFFFF.
It also makes fixed1616ToInt() consistent with fixed1616ToReal(),
see 7d3f353a5b.
Change-Id: Id76025028c926872b002ef0a1ca8a8bdc2de3e1e
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Various tests were adapted to Q_OS_WIN to take account of the
deficiencies in its TZ APIs; which are now bypassed when ICU is
configured, as we use it instead. Replace some #if-ery on a local
define with QT_CONFIG(icu) and QMAKE_USE_PRIVATE += icu here, to match
in corelib/tools/tools.pri
Task-number: QTBUG-66367
Change-Id: Ia93abdeb7d12046310f0bb4a78c2669f8eecbbc2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This fix issues where long plain text where not wrapping and being
unreadable.
Change-Id: I64d4ce94f7460d00d1722647893bd8f70e5ea8d6
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
That is correct C++. GCC (and apparently Clang) accept it after the name
for compatibility with the old __attribute__ syntax.
Change-Id: Ie7f3adaaed83198ca1c61bc0efdf51634e457b07
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If buddy is deleted then QLabel will still try to deliver the
shortcut event to it, in QLabel::event(), and cras.
Besides connecting to destroyed() which alone fixes the crash,
also hardened it and guarded against dereferencing null buddy,
in the unlikely event of someone adding features to QLabel.
The second part is suitable for backporting to the LTS branches.
Task-Id: QTBUG-66841
Change-Id: Ib6a36a9f99cee31afe1f88eb77f5b6cafb8b1086
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Change container of spanningIndexes from QVector to QSet to speedup
the isFirstColumnSpanned/setFirstColumnSpanned. The order of the indexes
in the container is not needed and therefore QSet can be used here.
This also simplifies the code a little bit.
Task-number: QTBUG-66714
Change-Id: I1692ca1df751b2b8d26b607faf60ff2b94f6f964
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QItemDelegate::textRectangle did not adjust the width when the item
had a decoration or a checkbox. This lead to a too big width used for
the layouting and therefore sometimes the calculated height was too
small.
This was already done for QCommonStylePrivate::viewItemSize which is
used by QStyledItemDelegate before.
[ChangeLog][QtWidgets][QItemDelegate] fix text height calculation
when the item has a decoration or checkbox
Task-number: QTBUG-16134
Change-Id: I14c47c3f2d8cc0a0b6ec2b2999e70fda213887ae
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Whitelist tests that pass locally and that have been
blacklisted since the BLACKLIST was introduced in
2015 (in commit a8dda3b8).
Change-Id: I777b490313ebaa6c8c8daee168487d350179a5e6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The test has been flaky on top of QEMU. The test is clearly a sort of manually
rolled benchmark, not a regular autotest. Remove the test and replace it with a
benchmark in QObjectBenchmark.
Task-number: QTBUG-66823
Task-number: QTBUG-66216
Change-Id: I7a48293023f32141eed6fea50fbb63af18933a8f
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Since we made the NSMenu delegate a singleton we could not rely
on it to have enough information to implement worksWhenModal.
At the same time as the delegate change, we derived NSMenu into
QCocoaNSMenu. This allows us to extend the menu functionality
and, in this case, serve as target for the Cocoa menu items.
We also refactor setting the item's target/action.
Manually tested against menurama and bigmenucreator tests, the
test-case for QTBUG-17291, and the richtext/textedit example.
Change-Id: I222241f71db82611711b23d4a8c6122a741370ae
Task-number: QTBUG-66676
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
To have a stable base for creating temporary files it's useful to have
the temporary path be not just cleaned, but also the canonical path, so
that any symlinks are resolved. This is e.g. the case on macOS, where
/tmp is symlinked to /private/tmp.
Fixes tests that compare paths, e.g:
FAIL! : tst_QDir::current(startup) Compared values are not the same
Actual (newCurrent.absolutePath()): "/private/var/folders/51/hhvngbjd36vbn1ncklb73g2h0000gn/T/tst_qdir-FACBOE"
Expected (currentDir) : "/var/folders/51/hhvngbjd36vbn1ncklb73g2h0000gn/T/tst_qdir-FACBOE"
[ChangeLog][QtCore] QDir::tempPath() now reports the canonical path
of the temporary directory, with any symlinks removed.
Change-Id: I20df9076c9869227f32740b196fd7ffb8b1b9ced
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
They were forgotten when the overloads for append()/push_back() were
added in Qt 5.6
[ChangeLog][QtCore][QVarLengthArray] Added missing rvalue overload of
operator+=() and operator<<()
[ChangeLog][QtCore][QVector] Added missing rvalue overload of
operator+=() and operator<<()
Change-Id: I20fedfba2bf282773bd1f9cf2c8ec06f05896a7d
Reviewed-by: Martin Smith <martin.smith@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Rearrange QSqlFieldPrivate members to only need 64Byte instead 72 in
an 64bit environment.
Change-Id: I620c18aca06a11b7ab4bd8e99b377b9d823da7f4
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
When QStandardItem::insertRows/Columns is called with an empty list
or an insert count of 0, do not assert but return false.
Task-number: QTBUG-66491
Change-Id: I328598e08584fb9b0a35075458bfeb31c57ebfee
Reviewed-by: Samuel Gaist <samuel.gaist@edeltech.ch>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Since Qt 5.4 the QTabBar can be automatically hidden when it has less
then 2 tabs. Therefore the sizeHint should not consider the tabbars
size when the tabbar is hidden.
Task-number: QTBUG-64715
Change-Id: I2f248f88d9070de5354f7344c7628a78442ab499
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Postgresql needs a special value for nan and +/- inf. This was
considered during insert but not during select.
Also remove some pre-c++11 inf/nan - handling and replace it with
Qt equivalents.
Change-Id: I044ca58e9cf673f4b100b05a0d8e25c8a9c29ec5
Reviewed-by: Robert Szefner <robertsz27@interia.pl>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
On Apple OSes, both compilers and linkers are given an absolute path.
For consistency, the same should be done with the C linkers.
The change is also a convenience to the MacPorts project,
which actively discourages ambiguous compiler names.
(https://trac.macports.org/wiki/UsingTheRightCompiler).
Change-Id: Ic1885aed825340696e9fde766788eebf51de3ff6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The privately exported qt_logging_to_console() function has been renamed
to shouldLogToStderr, and exported in the QtPrivate namespace for QtTestLib.
[ChangeLog][Important behavior changes][Logging (including qDebug and
qWarning)] The QT_LOGGING_TO_CONSOLE environment variable has been
deprecated. Use the more specific QT_ASSUME_STDERR_HAS_CONSOLE or
QT_FORCE_STDERR_LOGGING, depending on your usecase.
Change-Id: Ie29228eeac3b700c3de94fee022d5d66d9b5c210
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The simple scaling that only samples every input pixel once, can be
used with downscaling < 2x as well if we just handle the case where the
input can't be in the intermediate buffer.
At the same time the handling of the intermediate buffer has been moved
out of simple scale helper functions so the code can be shared and the
AVX2 optimizations also used for non-argb32pm formats.
Change-Id: I98d225ef8d4f2978480d09110c959b556c563b57
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The printVolumes function already adds line endings.
Change-Id: Id2553f881ccc0ab3c8b8fc77d3096dd5d968abda
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Instead of the current working directory, which doesn't necessarily match
the location of the settings file.
Change-Id: Idffe2e87190cc9b6027fbba3b84e9dbf72ccf2f6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
On Windows (Phone) 8.1 __getmainargs was still supported and used
to do the initialization of the application's parameters and
environment. When that functionality was removed together with the
now unsupported OSs,the initial filling of argc, argv, and env part
was forgotten.
Change-Id: I3b788de317b22b4525427faefc3fe974dac5d9ac
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Although WinRT doesn't officially support argc/argv, respect C++03
§3.6.1/2 (The value of argv[argc] shall be 0).
Task-number: QTCREATORBUG-19705
Change-Id: I190e2923b8a0665cc8975a800619fd916a4dd244
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Miguel Costa <miguel.costa@qt.io>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
This is the first step in being able to use the undo framework in QML.
The next step would be to separate it out of Qt Widgets so that a pure
Qt Quick application doesn't need to rely on it.
Note that QUndoCommand is not a QObject, so we cannot expose its text
member as a property until Qt 6.
[ChangeLog][QUndoStack] Exposed canUndo, canRedo, undoText, redoText
and clean as Q_PROPERTYs.
Task-number: QTBUG-40040
Change-Id: Ida7ec03f871f0db7fdcc5b90ed200024c5cb348e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
