QProcess::finished(int)/readChannelMode()/setReadChannelMode() are
obsolete but were not marked as deprecated.
Explicit mark them as deprecated so they can be removed with Qt6.
Change-Id: Iedbfd80a3c987f35caf93181e9277913a18961d9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Change b86d0b6215 rearranged the
sequence of function calls when generating code adding QTabWidget
and QToolBox pages, not taking into account that the iconCall()
has a side effect (writing out icon definition) Revert that part
and add a comment.
Fixes: QTBUG-72980
Task-number: PYSIDE-797
Change-Id: Ie8fbaa36f21cd4408fb1f491195da5c260708e6c
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Useful in contexts such as other QDebug operators, where the class
is already known, and the full scope of the flags is not needed.
Change-Id: I546381b1722c9c846e2412e56763563b8f625212
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Useful in contexts such as other QDebug operators, where the class
is already known, and the full scope of the enum is not needed.
Change-Id: Ibd04b1fd4f0f914c7224a007fc248d4ebabcde3e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Setting the fall-back network interface of danted's environment to eth0
by docker-compose file is redundant because the value of danted's
configuration (danted.conf) has been set to eth0 by default.
Change-Id: If2dea8daaf851577a573e201e9c50684916e5206
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
For macOS and Windows, the test-server containers are deployed in the
VirtualBox (Boot2Docker). Because Boot2Docker is a lightweight Linux
distribution made specifically to run Docker containers, it doesn't
install avahi-daemon and support mDNS discovery.
To resolve this problem, Docker compose file supports "extra_hosts" to
add hostname mappings inside containers.
BFAIL items:
tst_QNetworkReply::headFromHttp(...+proxy...) (ten cases)
tst_QNetworkReply::ioGetWithManyProxies(http-on-http)
tst_QNetworkReply::ioGetWithManyProxies(http-on-http2)
tst_QNetworkReply::ioGetWithManyProxies(http-on-multiple-http)
tst_QNetworkReply::ioGetWithManyProxies(http-on-http+socks)
tst_QNetworkReply::ioGetWithManyProxies(http-on-ftp+http+socks)
tst_QNetworkReply::ioPostToHttpFromSocket(...+proxy) (twelve cases)
tst_QNetworkReply::ioPostToHttpFromSocket(...+proxyauth) (ten cases)
Change-Id: Iec55966a9b5f191b7446985a15b49a8b09dcf407
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Docker compose file supports variable substitution. When running
docker-compose up, Compose looks for the environment variables from
shell and substitutes the values at runtime.
Change-Id: I5255ead82276fac7db24ee74af453f83ca20bbe6
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
There is no docker bridge on Windows. Docker document recommends using
port mapping to connect to a container. The problem is that it causes a
port conflict if the user is running a service that binds the same port
on the host. This change applies the same solution of macOS to deploy
the docker environment into VirtualBox and use the host network option.
Task-number: QTQAINFRA-2294
Change-Id: Iedcb8daa39373f02adb59f02eae2775f02870c54
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Apparently, it is not enough to just retry 10 times (10 seconds) in the
CI network. It happens from time to time that a test fails due to server
port is unreachable. Especially, the docker containers are running in a
virtual machine on Windows and macOS platforms. In such cases, it needs
more time to warm up the service depending on the system loading.
Change-Id: Ia0234bff2a82988b62f451e20b50671708784008
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Set the inherited properties as resolved on the font, so non-default
values are passed on in contexts that does resolve logic like QPainter.
One test is updated as it actually tests what it is supposed to on
more configurations.
Fixes: QTBUG-39560
Change-Id: Ief668e992ccdc091337a259a4c1306a00e67c73f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Adds support for Schannel, an SSL backend for Windows, as an
alternative to OpenSSL.
[ChangeLog][QtNetwork][Ssl] Added support for Schannel on Desktop
Windows. To build Qt with Schannel support use '-schannel' during
configure.
Task-number: QTBUG-62637
Change-Id: Ic4fb8ed3657dab994f9f4a4ac5cbddc7001a0a46
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Add qWaitForWindowExposed() for the toplevel and use QTRY_VERIFY()
for finding the delegates consistently.
Change-Id: I430088a91b5cc1a8f856d0a58aba066b1baf179b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Some of the spdy/3 tests don't pass anymore because those services
no longer support spdy/3. Solve this by updating it to HTTP/2 (h2).
Change-Id: Ib3ef6109b75f4298fed15c1c7922deca35459df9
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
tst_QString::localeAwareCompare() is failing since
ab448f731e because the 'C' locale no
longer initializes ICU and falls back to simple QString comparison.
Fix it by explicitly setting the locale for the testdata to en_US so the
QCollator is properly initialized.
Task-number: QTBUG-73116
Change-Id: I9d4d55e666c5c52f93298dedb7e22da01a25318d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit 9d2923c1b0)
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
The cursor test sometimes fails due to the fact that the topLevel widget
has not yet reached it's fullscreen geometry. This means the
QGraphicsView is to small and the test will fail.
Avoid it by simply removing the topLevel widget since it's not used at
all.
Change-Id: Ia7b34f283a917a35b6665e6333a01378575a5a04
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Various tests were setting the default locale and relying on cleanup()
to "restore" the C locale; which needn't actually be the locale we
started out in and, in any case, was the wrong locale for some tests.
So handle this via an RAII class that records the actual prior locale
and restores it on destruction.
Fixes: QTBUG-73116
Change-Id: If44f7cb8c6e0ce81be396ac1ea8bab7038a86729
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The CreationDate entry in the two PDF files can potentially
be different depending on when the test is run.
97b4c5a574 already accounts for it but
the current tag for creation date is '/CreationDate'. Therefore check
if the line contains 'CreationDate' instead.
Change-Id: I1fc069cf935bba07084ac4a0743ff05312374d10
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
tst_QString::localeAwareCompare() is failing since
ab448f731e because the 'C' locale no
longer initializes ICU and falls back to simple QString comparison.
Fix it by explicitly setting the locale for the testdata to en_US so the
QCollator is properly initialized.
Task-number: QTBUG-73116
Change-Id: I9d4d55e666c5c52f93298dedb7e22da01a25318d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The output files for the tuplediagnostics selftest of testlib had a
stray non-canoical path fragment in them; so replaced with its
canonical form.
Change-Id: Ib421380036c3fb1b91447eb8c87be4ad0dfe5c96
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
This appears to be a timing issue of vsftpd's initial script
(/etc/init.d/vsftpd). When starting the vsftpd service, the script uses
a while loop to make sure that the vsftpd process has been created with
the expected PID. The problem is that it should sleep if it can't grep
the same PID via ps command.
while [ ${n} -le 5 ]
do
_PID="$(if [ -e ...vsftpd.pid ]; then cat ...vsftpd.pid; fi)"
if ! ps -C vsftpd | grep -qs "${_PID}"
then
break
fi
sleep 1
n=$(( $n + 1 ))
done
if ! ps -C vsftpd | grep -qs "${_PID}"
then
log_warning_msg "vsftpd failed - probably invalid config."
exit 1
fi
However, synchronization based on time is not working in general. This
change will rewrite the while loop to an infinite loop and remove the
exclamation symbol (!) from the if condition.
Upgrading the version of vsftpd is not helpful here because
vsftpd_3.0.3-11 (Ubuntu 18.10) didn't resolve it yet.
Change-Id: I07382709c33bd9bab61fcea76ab7deca5f630084
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The bool is assigned on the previous line: QTRY_VERIFY will not do
anything because the statement is already true.
Change-Id: I067290e19ffd100819b2b631af431c6013623a00
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
It was an implicit effect before which stopped working after
dec7961709. Reintroduce it as some
projects used this side-effect as a way to abort the initial
highlighting.
Change-Id: I5340ee9882a242bc8b5f7f843f1cfe793a65d357
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
When debug_and_release option is in use, qmake will generate one
mata-Makefile and two additional leaf Makefile (Makefile.Debug and
Makefile.Release). In such case, testserver.pri will be included in all
three passes. The problem is that the mata-Mafile is used to invoke leaf
Mafile recursively. The docker test server should only be integrated in
the leaf Makefile.
To resolve this problem, this change uses "!build_pass" condition to
determine whether this is a pass of meta-Makefile, and then skip it.
Change-Id: Ibc48d657680e089ebaa1bc356b87eb4cfd9f4580
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
tr() recognizes %n and %Ln. it offers no way to escape lone percent
signs, which implies that they must be interpreted verbatim, which is
what the code actually does. except that it would run off the end if the
% appeared at the end of the string.
Fixes: QTBUG-57171
Done-with: Mateusz Starzycki <mstarzycki@gmail.com>
Change-Id: Icf81925c482be1ea66ec8daafb3e92ad17ea7fab
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Its filePath() and absoluteFilePath() don't trust its own
isAbsolute(), due to some infelicities on MS-Win; and kludged round a
consequent problem with resource paths; but other virtual file systems
weren't catered for. Replace the convoluted test there with a static
bool function (so that future kludges in this area shall only need to
edit one place; and can document why they're needed) and use a more
robust test that handles all virtual file systems (by asking
QFileInfo) but falls back to QFileSystemEntry to work round the known
infelicities on MS-Win. Add regression test for asset library paths
issue on iOS. Ammends 27f1f84c1c.
Moved a couple of local variables to after the early return, since it
doesn't need them, in the process.
Task-number: QTBUG-70237
Change-Id: Ib3954826df40ccf816beebe5c3751497e3bf6433
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
When using the overload of QCoreApplication::processEvents that takes a
maxtime argument, the function will keep processing events until there
are no more events, or until it times out.
The problem is that the function doesn't distinguish between events that
were on the event queue when the function was called, and events generated
by processing events as part of its own execution. If for example a widget
calls update() in its paintEvent, the function will spin for the entire
duration of maxtime.
That doesn't work for qWaitFor, where we need to check the predicate
between each pass, so we use the overload of processEvents that doesn't
take a maxtime. That's fine, as we have our own timeout logic.
Change-Id: I9738d7d0187c36d4a5ddfcd3fd075b0bd84583c4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
... as we normally do in other tests, using localhost.
Change-Id: I7969d7bfd50b545adae7e23476d17b6224e9a8fc
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The tests of smb protocol only work in the CI network. Therefore,
the docker-based test server for Windows can't pass all the tests of
QNetworkReply.
These two tests should be reworked when adding Samba server to the
docker-based test servers later on.
Task-number: QTBUG-72861
Change-Id: I54e639b5414760ee929d0d28fe10f9e021aff7dc
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
As the mnemonic has no meaning when it is in a dockwidget title, we
should just treat it as a literal ampersand instead and display it
as such.
Fixes: QTBUG-54485
Change-Id: I96c856ce2771a68d226f48f8f47affc24f1c53cd
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
This makes it possible to get rid of specialized functions for
converting to RGBA64PM, while at the same time making the conversion
faster as the painter routines are better optimized.
Change-Id: I3e73856b2c1411977450e72af1741aab0ecf537e
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
This allows anticipating and reusing internal allocations of
QPainterPathElements instead of using the common `m_myPath = QPainterPath{}` pattern.
[ChangeLog][QtGui][QPainterPath] Added clear(), reserve(), capacity().
clear() removes allocated QPainterPath elements but preserves allocated memory, which can be
useful for application with complex paths that are often recreated. reserve() and capacity()
follow QVector semantics.
Change-Id: I763461e2a421feda9053d3eb512af2fcf07ade2b
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The refactoring of dnd with f8944a7f07
added a regression which results in a need to reimplement
dragMoveEvent() on the drop side. Before this change it was possible to
accept the dnd in dragEnterEvent() without again accepting it in
dragMoveEvent().
Fix it in a similar way it's done in
QGuiApplicationPrivate::processDrag() by prefilling the first simulated
QDragMoveEvent with the values from the previous QDragEnterEvent before
it is sent to the drop receiver.
Fixes: QTBUG-72844
Change-Id: I1300dd02b7f1d9dcd44ecefa8335f92ad6c6cafa
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
qtbase/src/corelib/kernel/qmetatype.cpp: In static member function ‘static void QMetaType::destroy(int, void*)’:
qtbase/src/corelib/kernel/qmetatype.cpp:2599:27: error: ‘info.QMetaType::m_destructor’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (m_typedDestructor && !m_destructor)
~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~
qtbase/src/corelib/kernel/qmetatype.cpp:1868:15: note: ‘info.QMetaType::m_destructor’ was declared here
QMetaType info(type);
^~~~
qtbase/src/corelib/kernel/qmetatype.cpp:2600:26: error: ‘info.QMetaType::m_typedDestructor’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
m_typedDestructor(m_typeId, data);
~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~
qtbase/src/corelib/kernel/qmetatype.cpp:1868:15: note: ‘info.QMetaType::m_typedDestructor’ was declared here
QMetaType info(type);
^~~~
The extended (not inlined) function may be called on a half
initialized invalid instance.
Change-Id: I26d677a8ad2bd0c5846233f06393e774d377936d
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Also blacklist tst_QRawFont::unsupportedWritingSystem() and
tst_QGlyphRun::mixedScripts() on windows for now.
Conflicts:
qmake/generators/makefile.cpp
src/corelib/itemmodels/qstringlistmodel.cpp
src/platformsupport/fontdatabases/windows/qwindowsfontengine_p.h
tests/auto/corelib/itemmodels/qstringlistmodel/tst_qstringlistmodel.cpp
tests/auto/gui/text/qglyphrun/BLACKLIST
tests/auto/gui/text/qrawfont/BLACKLIST
Task-number: QTBUG-72836
Change-Id: I10fea1493f0ae1a5708e1e48d0a4d7d6b76258b9
When a button added to QMessageBox has AcceptRole or YesRole, the signal
accepted() will be emitted upon click on the button. If the button has
RejectRole or NoRole, the signal rejected() will be emitted upon click
on the button. If a button has a different role, neither accepted() nor
rejected() will be emitted. This works for both standard and custom
buttons.
The signal finished() with result code will be sent regardless of a
clicked button role.
Also added documentation strings for some methods of private classes in
order to have better tooltips in IDE(s).
Task-number: QTBUG-44131
Change-Id: I521a4e5112eb4cf168f6fbb4c002dbe119aeeb09
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This reverts commit c1fc47b06a.
CI is now running on 18.04 hosts and vmx is enabled on that level.
As the update in QTQAINFRA-2288, the macOS 10.13, openSUSE 42.3
and Ubuntu 18.04 had vmx enabled inside the VM.
Change-Id: I6ec4094ca826418f46f417b3cab89678bb089417
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The function is setting the brushes correctly in the return value, but
without updating the resolve_mask, making it return wrong results in
functions like isBrushSet or the debug operator.
Added a unit test for the member function, since the class is still
mostly untested, and clarified the reference documentation of what the
function is supposed to do.
Change-Id: Iaa820dc44f095e125f9375cb00da5569986803c6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The keyboard search in QAbstractItemView did not handled Key_Space
because this is also an edit trigger. It was also consumed if no edit
was started.
This patch changes this behavior and triggers the keybaord search when
the editing was not started.
Fixes: QTBUG-48505
Change-Id: I58e0d283f863c9b12ac5d2f6171f15522bd7c30a
Reviewed-by: David Faure <david.faure@kdab.com>
The keyboard navigation did not consider the disabled state when trying
to find the new index under all circumstances. This lead to a
non-working PageUp/Down/Home/End navigation when the first or last item
was disabled or hidden.
Fix it by explicitly checking if the calculated item is hidden/enabled
and skip it in this case.
Fixes: QTBUG-44746
Fixes: QTBUG-34832
Change-Id: Ifa3b64a405e67b792db5db9d186d426fcfe183fb
Reviewed-by: David Faure <david.faure@kdab.com>
QStringListModel::setData documentation states that
"The dataChanged() signal is emitted if the item is changed."
This patch actually respects the doc. setData will check that the data
actually changed before sending the dataChanged signal.
[ChangeLog][QtCore][QStringListModel] setData will now emit the
dataChanged() signal only if the string set is different from
the one already contained in the model
Change-Id: I4308a6f3b4851203fb899c5e29a36076e0c32f2f
Reviewed-by: David Faure <david.faure@kdab.com>
The grayscale font-smoothing doesn't expect to be linearly blended,
as first assumed.
Amended nativetext manual test to better diagnose the native Core
Text behavior. Non-linear blending will result in the magenta
text having a dark outline against the green background.
Change-Id: I24a5f04eb1bd66fb98d621078d80ee9b80800827
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Since QSqlDatabase::database() cannot be used to access another database
from another thread, then the overload is provided to make it possible
to clone with just the connection name. This will handle the cloning
internally safely then.
Fixes: QTBUG-72545
Change-Id: I861cc5aa2c38c1e3797f6f086594a1228f05bada
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
When eliding text we would check for the existence of the ellipsis
character and fall back to using the dot if it was not available.
However, when font merging was in use, we would also use ellipsis
from a fallback font if available. This could cause the metrics
of the text to increase if the fallback font had larger metrics,
and the result was that text could shift when elided.
It is better to prefer the dot from the current font than to use
the ellipsis from a fallback, so we only use the ellipsis if
it is in the main font.
[ChangeLog][QtGui][Text] Fixed a bug where eliding text could
change the height of its bounding rectangle for certain fonts.
Fixes: QTBUG-72553
Change-Id: Ib27fc65302465ddce661801bcc5ae32e55f1aeb9
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
since we'll refuse to continue with a handshake, failing in initSslContext()
on a disabled protocol versions. Then, functions like waitForEncrypted,
connectToHostEncrypted, startServerEncryption and startClientEncryption
should either bail out early (who needs a TCP connection which we'll
abort anyway?) or bail out whenever we can, as soon as a disabled protocol
was found in a configuration. This change also makes the behavior
of different back-ends consistent, since it's a general code-path
that reports the same SslInvalidUserData error. Update auto-test to
... actually test what it claims it tests.
Task-number: QTBUG-72196
Task-number: QTBUG-72179
Change-Id: I548468993410f10c07ce5773b78f38132be8e3e0
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The keyboard navigation with MovePageUp/Down and MoveEnd did not honor
disabled cells in all cases which lead to inconsistencies in the
navigation (esp. since MoveHome does honor them correctly).
Therefore make sure that all four move operations work consistent by
refactoring the code to use common functions.
Fixes: QTBUG-72400
Change-Id: I63fa3b626510d21c66f4f9b2b1bfb3261728ecaf
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
C++11 added the new enum class key as well as enum struct. While the
former is likely the most known and used, the later can be used in the
same contexts and with the same effects.
Currently moc doesn't parse enum struct while it does for enum class.
This patch fixes this.
[ChangeLog][moc] moc now parses enum struct the same way as enum class
therefore that keyword can be used with the Q_ENUM macro as well as
Q_FLAG and Q_DECLARE_FLAGS.
Change-Id: Iaac3814ad63a15ee4d91b281d451e786b510449c
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The current implementation of wildcardToRegularExpression doesn't
anchor the pattern which makes it not narrow enough for globbing
patterns. This patch fixes that by applying anchoredPattern before
returning the wildcard pattern.
[ChangeLog][QtCore][QRegularExpression] The wildcardToRegularExpression
method now returns a properly anchored pattern.
Change-Id: I7bee73389d408cf42499652e4fb854517a8125b5
Fixes: QTBUG-72539
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As per RFC 6176 (2011) and RFC 7568 (2015).
Code-wise, we're left with the decision of what to do with a few
enumerators in QSsl::Protocol; I've made TlsV1SslV3 act as TlsV1,
and adjusted the description of AnyProtocol.
A new test was introduced - deprecatedProtocol() - to test that
we, indeed, do not allow use of SSL v2 and v3. protocol() and
protocolServerSide() were reduced to exclude the (now) no-op
and meaningless tests - neither client nor server side can
start a handshake now, since we bail out early in initSslContext().
[ChangeLog][QtNetwork][SSL] Support for SSLv2 and SSLv3
sockets has been dropped, as per RFC 6176 (2011)
and RFC 7568 (2015).
Change-Id: I2fe4e8c3e82adf7aa10d4bdc9e3f7b8c299f77b6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
There was a comment in the code that said:
// It seems we need to use invertedAppearance for Left and right, otherwise, things look weird.
It's not clear what that was referring to, but in its current state,
a slider with invertedControls set to true will not behave as expected:
pressing the left arrow key will decrease its value instead of increasing it,
and vice versa for the right arrow key.
As stated in the documentation (and by its name), invertedAppearance only
controls the appearance of the slider, and not the effect of key events.
Remove the comment and use invertedControls instead.
Change-Id: I13296cbda9244413978ef0d7f0856065f74fd0bf
Fixes: QTBUG-25988
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Don't do several tests at once in the test function. Instead, move
the extra tests to the data function. This makes it possible to easily
add a self-contained test (i.e row) for an upcoming fix.
Task-number: QTBUG-25988
Change-Id: I65c8d7620f01107f8f59c96896b1a641d97f5fdc
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Add a lookup for the affected enum values and use the names instead.
Task-number: PYSIDE-797
Change-Id: I6be166409000aff83d9465c9a3b2f37b44c5c085
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Firefox, Chrome and various http libraries normalize /./ and /../ from
urls, but retain multiple adjacent slashes as is. Qt removes
duplicated slashes which makes it impossible to access some web
resources that rely on those.
Fixes: QTBUG-71973
Change-Id: Ie18ae6ad3264acb252fcd87a754726a8c546e5ec
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This solution is composed of two features:
1) C++ code generated by RCC uses two symbols exported from QtCore that
are only present if the feature was compiled in. If the feature was not
compiled in, this will cause a linker error either at build time or at
load time (if they were functions, the error could be at runtime).
2) Binary files generated by RCC have a new header field containing
flags. We're currently using two flags, one for Zlib and one for
Zstandard.
This means we now have binary RCC format version 3.
Change-Id: I42a48bd64ccc41aebf84fffd156545fb6a4f72d9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Insufficient memory was allocated when asking GetDIBits() to convert to 32bit.
Fix allocation size and use a QScopedArrayPointer.
Fixes: QTBUG-72343
Change-Id: I45f79c913a243316e01bc6efed08e50ccc7d25f4
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Changed 0 to nullptr, used more C++-style casts, simplified some
code for searching a button, and changed foreach to range-based for
loop.
Task-number: QTBUG-44131
Change-Id: I211b12751b0e2591d1d14294c31b51d52bb4e3f6
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
The Qt and CoreText positioning is now in sync.
Change-Id: I0cbb5b150d1bef732674b8d42c64a040773a62ab
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Previously, the C locale was treated as English because each back-end
takes the locale's bcp47Name(), which maps C to en. However, the C
locale has its own rules; which QString helpfully implements; so we
can delegate to it in this case. Extended this to sort keys, where
possible. Clean up existing implementations in the process.
Extended tst_QCollator::compare() with some cases to check this. That
required wrapping the test's calls to collator.compare() in a sign
canonicalizer, since it can return any -ve for < or +ve for >, not
just -1 and +1 for these cases (and it'd be rash to hard-code specific
negative and positive values, as they may vary between backends).
[ChangeLog][QtCore][QCollator] Added support for collation in the C
locale, albeit this is only well-defined for ASCII. Collation sort
keys remain unsupported on Darwin.
Fixes: QTBUG-58621
Change-Id: I327010d90f09bd1b1816f5590cb124e3d423e61d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Deprecate the QTreeWidget functions is/setFirstItemColumnSpanned() to
stay in sync with the other deprecated functions
(selected/expanded/hidden) so they can get removed in Qt6.
Also add a small unit test for them.
Change-Id: Ie1cb5d7163c2d56d653c21e841ccaf7d38569787
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This update is used to free the dependencies of the specific Ubuntu
packages. It ensures that test server is using the latest version of the
Ubuntu packages to test network changes.
Change-Id: I3257f435e6da02e3c6d5a141ece9c5d025e13065
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
All types that can be trivially copied and destructed are by definition
relocatable, and we should apply those semantics when moving them in
memory.
Types that are trivial, are by definition not complex and should be
treated as such.
[ChangeLog][QtCore] Qt Containers and meta type system now use C++11
type traits (std::is_trivial, std::is_trivially_copyable and
std::is_trivially_destructible) to detect the class of a type not
explicitly set by Q_DECLARE_TYPEINFO. (Q_DECLARE_TYPEINFO is still
needed for QList.)
Done-with: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Change-Id: Iebb87ece425ea919e86169d06cd509c54a074282
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][QUrlQuery] QUrlQuery now provides an
initializer list constructor. It can be created using a list of
key/value pairs.
Fixes: QTBUG-68645
Change-Id: Ief5939aa477718f6dd3580f2c60f95ff3aa892ae
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If the widget to which the scroller was assigned is deleted, the
QScroller ought to be deleted too, to avoid filtering events and then
following a dangling pointer while trying to react.
Fixes: QTBUG-71232
Change-Id: I62680df8d84fb630df1bd8c482df099989457542
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Robert Griebl <robert.griebl@pelagicore.com>
Verify that it does cut in after the specified time has elapsed.
Task-number: QTPM-1385
Change-Id: Ib18e8d6af28339f79cca4d62b869287ce07b8cc1
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Match the environment tst_selftests.cpp uses for subtests more
faithfully. Extends b22e50acda. In the process, tweak how crashers
are handling, in preparation for the watchdog test.
Change-Id: I09a046460f6f3bff0b12069fad6c1437d89572ce
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
One test for bad data for the column, another for a bad QFETCH.
Incidentally extend blacklist testing by blacklisting them.
Reorganise a QEMU condition that needed extended as part of this.
Task-number: QTPM-1385
Change-Id: Iac72ada19760321c5c9264ddfff7740d1fdd0700
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Currently, a tile rearrange will move the active subwindow (if any)
to position zero (top-left). This ignores any tiling order set via
setActivationOrder(). This change removes this move so that the set
tiling order is respected when a tile operation is performed.
Fixes: QTBUG-43356
Change-Id: I2c481f0ffe45e42e811c6b6d476eb4cb65aa5d1f
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This patch introduces a private 'API' to enable server-side OCSP responses
and implements a simple OCSP responder, tests OCSP status on a client
side (the test is pretty basic, but for now should suffice).
Change-Id: I4c6cacd4a1b949dd0ef5e6b59322fb0967d02120
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QListWidget::(is|set)Item(Selected|Hidden)() are deprecated for a long
time but not marked as such. Therefore explicitly mark them as
deprecated so they can get removed with Qt6.
Change-Id: I4567e740f1ebb5841b2e5b50c601fb83a782950c
Reviewed-by: Konstantin Shegunov <kshegunov@gmail.com>
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QMdiAreaPrivate::resizeToMinimumTileSize() does not take into account
scroll bars when calculating the minimum size for the QMdiArea widget.
As a result, if scroll bars are enabled or showing during a tiling
operation, the top-level widget incorrectly expands in size (instead of
utilizing the scroll bars). Therefore, we should only resize the
top-level widget if scroll bars are disabled.
Fixes: QTBUG-40821
Change-Id: I3a8b7582d23fdf12d2b09f3740eea6b60bb395c3
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
To unlock dev branch, we need to disable the Docker-based test server on
Linux for short-term. With this change, we can force update the SHA-1 of
docker images in both qt5 and qtbase. During this transitional period,
the Linux platform should keep using the remote test server.
Change-Id: I4c07abf36154382e5d667ca733901b6d7fda9677
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The tests of QNetworkReply keep failing due to VT-x is not available in
Coin environment. The VT-x/AMD-v feature is necessary when starting the
virtual machines. Before VT-X is added back to the CPU features, the
macOS platform should keep using the remote test server.
Task-number: QTQAINFRA-2288
Change-Id: Ib37d0e7a5fb1fb4ed5484f925f5023b19467e672
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
::link() is defined in unistd.h, so include it.
Change-Id: I58e99dbcdd64da6388f85d98e73e7d1bd56f4e37
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Adds a test case for 199f9c5448.
Task-number: QTBUG-59310
Change-Id: Iee26f8bc21884da36471935f64524b62c3f79ff4
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Certain fonts with multiple styles have the same family name. When
loading these as application fonts we were not specific enough when
querying for the text metrics. This meant that e.g. the bold version in
a font family would get the metrics of the regular one.
Fixes: QTBUG-67273
Change-Id: Ic988d62cddde0a1f77ddcaf2891cadc21c9b31e6
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
You cannot manipulate variables in custom target dependencies, so the
following code was invalid:
i386_d.depends = EXPORT_VALID_ARCHS=i386
In order to still build the fat binary, we split the project in four,
one for each architecture, plus one to create the final package.
Change-Id: If08cf54e2e4098a7e10df41b7ea8d2bf699f58be
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
If a focus frame is set around a widget that exist inside a
QAbstractItemView, both the focus frame and the widget will
be scrolled when the table is scrolled (since the focus frame
is a child of the view). The result is that after the widget
has been scrolled (which will move the focus frame to the
correct position as well), the focus frame will be scrolled
next, and therefore away from the widget.
This patch will catch this case by always adjusting the
focus frame position when someone tries to move it. Trying
to move the focus frame away from the widget it tracks
will anyway be flaky.
Fixes: QTBUG-63877
Change-Id: Ic2aacc4fafc219280e32092c258a7539d0db9cd0
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
It would crash if there is no screen at 0,0.
Change-Id: Ic84d75b3d8b917fe3696530cbe843e82923ba676
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The previous implementation leads to infinite chain of showing/hidden
line edit under circumstances described in QTBUG-54676. We basically got
the situation when size hint were calculated differently depending on
the line edit visibility state. In this case toolbar layout have to
show/hide extension button and line edit a lot of times and can never
leave this "loop" (please note, that the chain is much more complicated
in reality):
Resize toolbar -> Set layout geometry -> Size is OK to display line edit
-> Set layout geometry -> Hide extension button -> Set layout geometry
(wrong size is calculated here, so "run out of space") -> Hide line edit
-> Set layout geometry -> Show extension button -> Set layout geometry -
> Size is OK to display line edit ... And we're in the "loop"
Clear button is hidden if there is no text in a line edit.
In the previous implementation, the button was always visible, only
opacity was changing in order to "hide" the button. It resulted to
incorrect size hints (regular and minimum).
In the current implementation the button is really hidden/shown, and
size hints calculated correctly.
Also updated unit test for line edit.
Remove code duplication in functions for calculation text margin
Fixes: QTBUG-54676
Change-Id: I4549c9ea98e10b750ba855a07037f6392276358b
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Some tests were fixed and others were skipped/blacklisted.
Task-number: QTBUG-63152
Change-Id: Ica7df555f8d152ee589865911130525101d4b941
Reviewed-by: Liang Qi <liang.qi@qt.io>
This will be the only options for Qt 6, so make sure the code compiles now.
Change-Id: I23f791d1efcbd0bd33805bb4563d40460954db43
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This is necessary to provide details for the key too,
when the server is using DHE-RSA-AESxxx-SHAxxx.
Amends 7f77dc84fb.
Change-Id: I8ab15b6987c17c857f54bc368df3c6c1818f428c
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
keyboardInputInterval() is 400ms by default which slows down the
testcase without a good reason.
Set it to 100ms which speeds up the testcase from 20s to 10s on my
system.
Change-Id: Ib883c5d3f09f8e896ae56a8fc8df2233be63de01
Reviewed-by: David Faure <david.faure@kdab.com>
Fixed a misguided condition in the check for bogus texts in the sscanf
branch of the decoder; it checked for 'e' but neglected 'E', which is
just as valid.
Change-Id: I9236c76faea000c92df641930e401bce445e06c8
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Revised some toFloat()s to be consistent with the matching
toDouble()s; previously, they would return infinity if toDouble() did
but return 0 if toDouble() got a finite value outside float's range.
That also applied to values that underflowed float's range, succeeding
and returning 0 as long as they were within double's range but failing
if toDouble() underflowed. Now float-underflow also fails. Amended
their documentation to reflect this more consistent reality.
Added some tests of out-of-range values, infinities and NaNs.
[ChangeLog][QtCore][toFloat] QString, QByteArray and QLocale returned
an infinity on double-overflow (since 5.7) but returned 0 on a finite
double outside float's range, while setting ok to false; this was at
odds with their documented behavior of returning 0 on any failure.
They also succeeded, returning zero, on underflow of float's range,
unless double underflowed, where they failed. Changed the handling of
values outside float's range to match that of values outside double's
range: fail, returning an infinity on overflow or zero on underflow.
The documentation now reflects the revised behavior, which matches
toDouble().
Change-Id: Ia168bcacf7def0df924840d45d8edc5f850449d6
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
They actually return infinity if conversion overflows, while still
setting ok to false; they were documented to return 0 on failure, with
no mention of this special handling of overflow. Documented reality
rather than changing the behavior. Gave underflow as an example of
failure other than overflow (toDouble()s do indeed fail on it).
Added some tests of out-of-range values, infinities and NaNs.
[ChangeLog][QtCore][toDouble] QString, QByteArray and QLocale return
an infinity on overflow (since 5.7), while setting ok to false; this
was at odds with their documented behavior of returning 0 on failure.
The documentation now reflects the actual behavior.
Fixes: QTBUG-71256
Change-Id: I8d7e80ba1f06091cf0f1480c341553381103703b
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
A couple of QLocale tests were using setlocale twice to provide a
transient locale tweak in tests; however, if the test in between
fails, that can leave the program running in the "transient" locale
after. So implement a proper class whose destructor ensures the
transient is tidied away. Also change the locale in use by one of
these transient changes: it purported to be checking things didn't
depend on locale, but was using the same local as most of the
test-cases for its test.
Change-Id: I0d954edcc96019a8c2eb12b7a7c568e8b87a41d5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
QGraphicsProxyWidget::setWidget() is checking if the newly assigned
widget is already assigned to a child proxy widget without checking if
the child has a widget assigned at all which lead to a nullptr reference
if it is not the case.
Therefore check if the assigned widget is a valid pointer.
Fixes: QTBUG-15442
Change-Id: I006877f99895ca01975bdcad071cfcf90bea22ad
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Use 'msvc' instead of 'win32-msvc' or even 'win32-mscv*'.
Change-Id: I21dc7748a4019119066aea0a88a29a61827f9429
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This test was taking so much time that it regularly timed out on WinRT
and when running in qemu. Reduce it from around 40 to 7 seconds on a
powerful desktop.
Now it either runs for two full seconds for each test function or until
it has done 50 iterations.
Fixes: QTBUG-71405
Change-Id: If752c1e65d3b19009b883f64edc96d020df479d1
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
QFile::map() is documented to continue working after the QFile is
closed, so this should work for the resource file engine too.
Change-Id: I343f2beed55440a7ac0bfffd1563243a3966441f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We were returning a pointer to the compressed data and comparing to the
compressed data size.
Change-Id: I343f2beed55440a7ac0bfffd1563232d557c9427
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: hjk <hjk@qt.io>
Instead of using a QString with only the prefix, let's do a full
comparison to make sure there's no junk at the end of the file.
Take the opportunity to remove the nonsense of a space at the end of
most of these files (I didn't remove from all).
Change-Id: I343f2beed55440a7ac0bfffd15632228c1bfe78f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Both use same source, but link without and with Qt Gui library.
Task-number: QTBUG-71751
Change-Id: I5643a07a8067f5fc10fc66f717f19bc3e16a33ab
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The test has been failing over and over since it was removed from the
blacklist. Obviously it is not stable.
This is a partial revert of commit
b10ee45546.
Task-number: QTBUG-71773
Change-Id: Ie2588538ee704652c2f09ce6ad947da3011e7dad
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The test needs to also unregister its timers when it fails. Therefore,
wrap the registering and unregistering in an RAII class.
Task-number: QTBUG-71773
Change-Id: I6ef44e580880deecb32763b5b0cd71e1c26929be
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Windows and WinRT only have on event dispatcher class so that failing
test cases in one test will most likely also happen in the other.
Change-Id: Ib047c6870e6e02f3cf8deaaa6e438ed0ac7e2d5a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
- Fix some clang nags (QFileInfo::exists(), raw string literals).
- Update the version numbers in the baseline to be 5.12 consistently
to make future modifications easier.
- Introduce another environment variable to redirect the diff
output to stderr. This can be used to generate a diff for applying
when making larger changes to uic.
Task-number: PYSIDE-797
Change-Id: I3f6716f0fe8e5939f6bef3965d90b2bb2c37f4c4
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Replace the generation of #ifdef's for the macros by QT_CONFIG
checks. Implement it using streamable classes to make it easier
to switch the output language later.
Task-number: PYSIDE-797
Change-Id: I28b5ed3ec80cd525a3df0cd54d9be4f09149cde4
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Including 4f7ad5ec44
to make appimage not ambiguous
Change-Id: I8db13fc785b267c09667ef38430bf98135c7f0d6
Reviewed-by: David Faure <david.faure@kdab.com>
We document being able to parse more than 8-bit per color, but were
ignoring everything after the first 8 bits.
Change-Id: Ic85ab04b0836e6979a623e294eebd5084c1a9478
Fixes: QTBUG-71373
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
On Linux, the printer panel impacts the application startup time,which
can be annoying when testing other dialogs.
Change-Id: Id13446047cf50765951a6bb5182ee50cae983457
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
QTBUG_7714_fullUpdateDiscardingOpacityUpdate2() would fail when
it moved to another screen if there is one to the left.
Change-Id: I3f8edc04c31dffc5a3bd005d9e5170dd68151df7
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
QTreeWidget::(is|set)Item(Selected|Hidden|Expanded)() are deprecated
for a long time but not marked as such. Therefore explicitly mark them
as deprecated so they can get removed with Qt6.
Change-Id: Ie4971350de61326811e0788df0d359ed3c442869
Reviewed-by: Konstantin Shegunov <kshegunov@gmail.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QHeaderView::initializeSections() was calling updateHiddenSections()
with wrong parameters which lead to an inconsistency in the hidden
section handling.
updateHiddenSections() needs the first and last index which got removed.
Therefore we must pass the new section count for logicalFirst.
Fixes: QTBUG-55461
Change-Id: Ica06125cf19bdd500f55fd9cd59ace1795f3703f
Reviewed-by: David Faure <david.faure@kdab.com>
When calling setDocument (directly or through the constructor) a delayed
rehighlight is initiated. Previously, if any text was changed before
this rehighlight could run it would cancel the rehighlight, even if the
changed text only caused a new block of text to be highlighted.
Fixes: QTBUG-71307
Change-Id: Ib09b664d90906f5b4427105f0e45469806f3a779
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Since the comma character was originally used as a separator, we
need to extend QFont to have setFamilies() so that we can avoid
joining the family strings together. This enables us to see the
family name as a single string and for multiple family names,
we have families().
Subsequently, this has added functions to QTextCharFormat to
account for multiple font families too. So it is now possible to
set a single one directly with setFontFamily() and multiple ones
with setFontFamilies().
This also bumps up the datastream version to 19 as QFont now
streams the families list as well.
[ChangeLog][QtGui][QFont] Add setFamilies()/families() to aid using of font families with commas and quotes in their name.
[ChangeLog][Important Behavior Changes] QDataStream version bumped up to 19 to account for changes in the serialization of QFont.
Fixes: QTBUG-46322
Change-Id: Iee9f715e47544a7a705c7f36401aba216a7d42b0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
It's not actually exercised by anything in our source tree, but is
potentially useful and has been part of the documented public API for
some time. So mention that the caller is responsible for delete[]ing
its return and add a test that exercises it.
Task-number: QTPM-1385
Change-Id: Ifc5284b9eb1b678cf3c9708c681311e874838fc6
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The unit tests weren't running into this problem because the every
setDevice() was preceded by the object being initialized with the exact
same data, so there was never a previous error state. I've only changed
a couple of tests, left the other setDevice() unchanged so we test both
behaviors.
Fixes: QTBUG-71426
Change-Id: I1bd327aeaf73421a8ec5fffd1561a590e3933376
Reviewed-by: Nils Jeisecke <nils.jeisecke@saltation.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
By accident, when we erroneously tried testing TlsV1_3 on macOS with
SecureTransport (which does not support TLS 1.3) we hit this quite
subtle problem: it can happen that a server-side socket is never
created but a client (after TCP connection was established) fails
in TLS initialization and ... stops the loop preventing
SslServer::incomingConnection() from creating its socket. Then we
dereference nullptr.
Task-number: QTBUG-71638
Change-Id: I8dc5a4c53022a25aafe2c80a6931087517a48441
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Add an option that moves windows back to the top left corner,
which is useful when some window (of some application saving its
position) is lost after changing the monitor setup.
Change-Id: If358b1ed7f481f2bb98e375e88f11049f97a4a91
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
1. Remove the conditional inclusion of DTLS versions, they made difficult
and unnecessary ugly adding new protocols (something like TlsV1_2OrLater + 4).
2. OpenSSL 1.1.1 first introduced TLS 1.3 support. OpenSSL 1.1 back-end is
compatible with OpenSSL 1.1.1, but would fail to extract/report protocol
versions and set versions like 'TLS 1.3 only' or 'TLS 1.3 or better' on a
new context. Given 1.1.1 is deployed/adapted fast by different distros,
and 5.12 is LTS, we fix this issue by introducing QSsl::Tls1_3 and
QSsl::Tls1_3OrLater.
SecureTransport, WinRT and OpenSSL below 1.1.1 will report an error in case
the application requests this protocol (SecureTransport in future will
probably enable TLS 1.3).
Saying all that, TLS 1.3 support is experimental in QSslSocket.
Done-by: Albert Astals Cid <albert.astals.cid@kdab.com>
Done-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Change-Id: I4a97cc789b62763763cf41c44157ef0a9fd6cbec
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This allows a user to efficiently watch for services with a common
domain prefix.
This is exposed in the API via a wildcard character in the service name.
For example creating a watcher on "org.mpris*" will match
"org.mpris.foo" "org.mpris.bar" and "org.mpris" itself. It will not
match org.mprisasdf.
Internally the argument match rules have been expanded from a single
QStringList to a struct containing args and arg0namespace. This was done
so that we can easily use argpath in match rules in the future.
Change-Id: I55882ab603cc6ba478e8c0ea9a6800f6e483a50c
Reviewed-by: Kai Uwe Broulik <kde@privat.broulik.de>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: David Faure <david.faure@kdab.com>
This avoids memory allocation and data copying in e.g.
QObject::property().
Detected by heaptrack's "Temporary allocations" counter in an
application using the breeze widget style (many animations).
Change-Id: Iabdb58a3e504cb121cce906ef707b0722de89df6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Implemented a new proxy model to transpose the source model.
Rows will become columns and vice-versa.
Both flat and tree models supported.
[ChangeLog][QtCore] New class QTransposeProxyModel to
swap rows and columns of the source model.
Change-Id: I902963c6b81aa0f63b5ad2bddca538f28b565084
Reviewed-by: David Faure <david.faure@kdab.com>
Replace BackgroundColorRole/TextColorRole with
BackgroundRole/ForegroundRole and explicit deprecate them for 5.13
Change-Id: I6b0d99844a32d2f5fdfd1878317a7b7422b800d3
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Replace all occurrences of QApplication::set/resetOverrideCursor with
the QGuiApplication::set/resetOverrideCursor since it's a static
function of QGuiApplication.
Change-Id: Ic898ab50a7ad4ed2bc9c6acb26cf4a979c2f82af
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The tests would rely on the window manager giving it focus a bit too much.
Change-Id: I1b28def2c95a4f0a9665a7cf6e0c14db03df98d5
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
This only updates data on languages already present in 5.12; once it
has merged up to dev, the scripts need to be run again to pick up a
few more languages and possibly add any more new languages present in
v34. Change some tests to match changes in en_AU's abbreviated day
and month names.
[ChangeLog][ThirdParty][CLDR] Update locale data to CLDR v34.
Task-number: QTBUG-71144
Change-Id: I68402b5e7e9d3dba669b8ba31b9a8abd86675c6e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
tst_QSqlQuery::bindBool() did not check if the bool is correctly bound
as part of the WHERE statement. Add a new test to query for the bool
column and check if there is exactly one row returned.
Fixes: QTBUG-38891
Change-Id: I0bd1ceb1b30e50f67f44f5b06d68683195b78b29
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
When QMimeProvider parses the shared mime database xml files,
it will read the <comment> element for mime comment and treat the
`xml:lang` attribute as locale language string. When no `xml:lang`
attr is provided, QMimeProvider will read the value and treat it as
a en_US locale string as the default key.
When we call QMimeType::comment(), it will try to get the locale
comment string with the default language (QLocale().name()), once
it can't find a matched result, it should return the default key
(which QMimeProvider set it as en_US locale before) as fallback.
Task-number: QTBUG-71314
Change-Id: I444f8159d6f19dfef6338cd79312f608d8f13394
Reviewed-by: David Faure <david.faure@kdab.com>
QTableWidget::isItemSelected/setItemSelected() are deprecated for a
long time but not marked as such. Therefore explicitly mark them as
deprecated so they can get removed with Qt6.
Change-Id: I77fffe2786751306115c3f5da0ef98ff84e35b1a
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QTreeView/TableView::sortByColumn(int) was deprecated a long time ago
but never got removed. Therefore mark it with QT_DEPRECATED_SINCE(5, 13)
so we can remove it with Qt6.
Also sync the handling of the sort order changes in QTableView with the
one from QTreeView.
Change-Id: I0371d9a9c21116edaa9125835827f1a200075d36
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QTreeView only had functions to either expand all items or until a given
depth. What was missing is to expand all subitems for an index
programmatically which is added with this patch.
[ChangeLog][QtWidgets][QTreeView] Added expandRecursively() to expand
all items below a given index
Fixes: QTBUG-10482
Change-Id: I8fc4d50b0b7e90245840c99a0188f13c0670253a
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Follow the pattern of char and float, and treat shorts as a more generic
type in QVariant::canConvert()
Task-number: QTBUG-60914
Change-Id: Ib1cc7941ee47cb0fc0098f22f98a03cd6f6b63fe
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In the process, corrected an inaccurate XFAIL message (an XPASS is
normally an error, unless blacklisting ignores it so turns it into a
BPASS). Added the missing .tap file to its expected output.
Documented the similarity to the silent/ selftest.
Task-number: QTPM-1385
Change-Id: Id74a1353d54af2f3bfe2c764e33c1f051958ab21
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The testlib selftest sets various things in the environment for
crashing tests; the generator for its expected output should set the
same things, as they affect what output is produced.
Change-Id: Iec2ed59982ea1043582573530c33619d8e8ed08e
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
If the two lines have identical texts, the comparison returns true.
So don't complicate various other conditions on the way there with
filtering out that case; deal with it first so they don't need to.
Change-Id: Iebd230704ce5f53d12d5afa64aab30f83bb9d407
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Added operator[] to QCborValueRef and mutating operator[] both there
and in QCborValue. If the value (referenced) is not a container, it
is replaced with a map and a reference into the result is returned.
If the value is an array and the key is a string, negative, or more
than 0xffff, the array is first converted to a map.
Change-Id: Ibbc9e480fb25eb3d05547c8a1b99e762b2a68b68
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The bitmap cache for the first 64 signals being connected was only set when the
connection is added. It was never unset when the connection was removed.
Internal use of the connectedSignals bitmap is not hurt by it occasionally
saying a signal is connected even though it is not, since the purpose of those
checks is avoiding expensive operations that are not necessary if nothing is
connected to the signal.
However, the public API using this cache meant that it also never spotted
signals being disconnected. This was not documented. Fix the behavior by only
using the cache if it is up to date. If it is not, use a slower path that gives
the correct answer.
To avoid making disconnections and QObject destructions slower, the cache is
only updated to unset disconnected signals when new signal connections are
added. No extra work is done in the common case where signals are only
removed in the end of the QObject's lifetime.
Fixes: QTBUG-32340
Change-Id: Ieb6e498060157153cec60d9c8f1c33056993fda1
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Spaceship operator was disabled for QCborValue, but not the test.
Change-Id: Icb91da689f62ef6de9f4fa926346505c5e50e9eb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
PCRE2 does not support JIT on winrt. This test row takes a long time
(30 seconds here) without JIT and thus might cause test timeouts in
COIN when run on winrt.
Change-Id: I79d9f6be16dbe16594ae2bf51f353acd06b3d2fe
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This way there is only one for loop, which is more optimizer friendly
Change-Id: Iaa02026627d5259c3eea1ff5664e8f22664eef73
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since Qt 5.10, qTo/FromBig/LittleEndian<float/double> stopped working.
It may be confusing, but big endian floats do exist, so not to break old
code, we should support them.
Change-Id: I21cdbc7f48ec030ce3d82f1cd1aad212f0fe5dd0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
the test is stable in Qt 5.12.
Task-number: QTBUG-60993
Change-Id: I0c366567121688d9518e90b5e8f9ec1b4006b7b9
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
on macOS, the test seems to be stable nowadays.
Task-number: QTBUG-39986
Change-Id: I18430c3feb27a5bee5474e1eb95f7d89b25f00a9
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
on macOS, where it was skipped but where it now seems to be stable/work.
Task-number: QTBUG-39983
Change-Id: I100a57f23b43074ebacc012be247d92acc6ae336
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Calling rowCount inside another auto test function yields unexpected
results, if rowCount fails. Without a check for QTest::currentTestFailed
the failure will not stop the calling function and other functions like
rowsInserted and rowsRemoved might happily continue even though their
requirements are not met. That caused a crash on winrt under certain
circumstances.
In addition to that TRY_WAIT now does not only wait for the given
amount of time, but also gives feedback about its result. Before
this change TRY_WAIT was basically useless, as it gave no indication
about its success/failure.
Fixes: QTBUG-71121
Change-Id: Ibd3f233a0b913db799814be97c4274d510643c74
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Before reading the configuration of a docker machine, the machine shall
be created and started. Otherwise, the docker command will complain
about "cannot connect to the Docker daemon".
If the docker machine has not been created, the make check will be
immediately terminated, and then print the error message. If its status
is not running, the machine will be turned on by a start command.
Change-Id: I7f4c322e7bdf29e4e4203e0e1bbc2e5c8cf677be
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The state was forgotten from the translation layer, this is important for tree views.
Fixes: QTBUG-71223
Change-Id: Ief4004fe455889f9d5a7eb018bf34d37c36a6bd9
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
POSIX specifies that tzset() consults environment variable TZ and
modifies some globals; it also specifies mktime(), localtime() and
strftime() to behave as if they called tzset(). Fortunately, we only
call strftime() from a test and only call localtime() when not
threaded. Provide wrappers for tzset() and mktime() that share the
lock used by our environment-access code, to prevent races on the
environment (and tzset()'s globals) when we call them.
In the process, re-use tst_QDateTime's TimeZoneRollback in its older
test systemTimeZoneChange() and presume that this can now be tested
cross-platform, since TimeZoneRollback is used in another test where
this works.
Fixes: QTBUG-71030
Change-Id: I79f559b8857ea2803e73501008bf0d7158c6731f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTableWidget::takeItem() emitted cellChanged with row and column set to
-1. The internal functions searched for item after it was reset to
nullptr and therefore it was not found.
Since the modified cell is known because it's passed to the takeItem
function, the correct row/column can be retrieved from there.
Task-number: QTBUG-70478
Change-Id: I5ff5991c49f3200efe95fde4c7d0d28e19be7ebf
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This test works for me with KWin and is blacklisted on most linux platforms.
Let's try to remove the blacklisting next.
Using qWait right in front of the QTRY_VERIFY does not add any value.
Task-number: QTBUG-26424
Change-Id: I2dcd5fb3f3cbb64e190c777231b791d1ad9dd704
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
There is no docker bridge on macOS. Docker document recommends using
port mapping to connect to a container; but it causes a port conflict
if the user is running a service that binds the same port on the host.
An alternative solution is to deploy the docker environment into
VirtualBox and use the host network option.
Task-number: QTQAINFRA-2293
Change-Id: I05dc65c5f8b4be7a1b1874a4ec7c034cc68679ca
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The internal and external keywords in the server configuration are used
to specify the network interface (IP address) that the Dante server
should bind to. Because docker-compose allows a container to join more
than one network (by adding multiple entries under the top level
networks key to a docker-compose file), the default server
configuration (danted.conf) shall be updated in accordance with the
settings in the docker-compose file.
The user can pass the setting of a docker-compose file to containers by
adding environment variables in the docker-compose file. After the
container gets created, the danted.sh script uses the input environment
variables to overwrite the default value of internal and external
interfaces before starting the Dante server.
environment:
- danted_internal=eth1
- danted_external=eth1
- danted_auth_internal=eth1
- danted_auth_external=eth1
Change-Id: I7c65cdd136ba5dac387bee5e22e1f4335e960101
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The hue parameter in hsl/hsv was treated the same way as a the other
parameters although it's range is from 0-359 and not from 0-255.
Fix it by extending the maximum range for the first parameter when
parsing a color value given in hsv or hsl.
[ChangeLog][QtGui][CSS] Fix the range of the hue parameter when parsing
a color given in hsl or hsv
Fixes: QTBUG-70897
Change-Id: I9ffa65a89c0abcca62bae35777ca1cbde3375180
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The Qt stylesheets color property did not support hsl or hsla although
CSS 2.1 does support it. Since QColor natively supports this color model
only the color parsing needed to be adjusted.
This also adds some stricter checks for a valid css color definition and
prints a warning about the issue.
[ChangeLog][QtGui][CSS] Added support for hsl/hsla colors
Fixes: QTBUG-58804
Change-Id: Ief65a36a7e0ed0d705dc1fe5a8658e8d07fe9a13
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Only QGuiApplication would emit the signal. Untangling the duplicate
code is rather non-trivial, so left alone for now.
Fixes: QTBUG-71186
Change-Id: I4021e3b9ff39718562f4fa3a03c092436b559e9a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This test triggered a compiler warning for good reason, it made no
sense, trying to change it to what it was probably meant to be.
Change-Id: I01a848272b42dae2aaa58a4f5bed998644d864da
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Some of the enums were cast to int on comparison. That just makes it
harder to know what the values were.
And verifyClientCertificate had 4 cases which were named the same as 4
others.
Change-Id: I09e8e346a6f416236a92073cf9a8f349938d37ef
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Before commit 4d15f393a7 update requests
were handled by a timer on QWindow. Therefore they survived the closing
and re-opening of platform windows. Now, as the timer was moved to
QPlatformWindow, it gets reset when you close the QWindow, and any
pending update requests are lost. However, we do set the
updateRequestPending variable on QWindow when requesting an update.
Therefore, we can also restore the update timer on the platform window
when creating it.
Change-Id: I23b00f24a46706beac7d1455edd8a5623db46b22
Fixes: QTBUG-70957
Reviewed-by: Tim Jenssen <tim.jenssen@qt.io>
Reviewed-by: Thomas Hartmann <thomas.hartmann@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
In some cases, a tool tip may be shown outside screen geometry, i.e. if:
- QToolTip::showText is invoked manually with a position outside.
- In tst_QToolTip::setPalette if there is no screen at (0, 0). This might
happen in a multi-monitor setups where one screen is taller than the other.
- On Wayland windows are (by design) not allowed to know their position on
the screen. This means that global positions can't be trusted.
This started crashing when QDesktopWidget::screenGeometry(pos) was replaced
with QGuiApplication::screenAt(pos)->geometry() because screenAt will return
null if no screen is found, while screenGeometry defaulted to the primary
screen.
This reverts to the old behavior of falling back to the primary screen.
This won't solve the issue completely for the Wayland case, but at least we
will stop crashing.
Change-Id: I42dd07cc21c2f9f0ea0d69f0c25bd46d8a2615a0
Reviewed-by: Filipe Azevedo <filipe.azevedo@kdab.com>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QImage's operator>>(QDataStream&) did not set an error mode on the
stream on read failures. That would break QDataStream transactions.
Since the current QImage serialization cannot differentiate between
truncated and corrupted data, we set the ReadPastEnd error as expected
by the transaction system.
Also specify the expected file format on decoding QImage from stream,
to avoid all the format handlers' canRead() being invoked. This is
necessary since some of them may call ungetChar(), which fails when
the stream is in a transaction.
Also add testing of this feature to the QDataStram transaction
autotest. That required a slight rewrite of the fake sequential
QIODevice subclass. The previous implementation had incorrect
behavior of peek(), which is required by QImage decoders.
Task-number: QTBUG-70875
Change-Id: If3f1ca7186ad1e6ca0e6e8ea81d2b2fbece6ea01
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Wrong option was used to set zlib compression level for png
setCompression with negative value uses default compression
setCompression with value between 0-100 converts to zlib compression level 0-9
setCompression with positive value overrides Quality option
Change-Id: Ic4b048a1e30d6940019c2a00a6c24d0c11e3f821
Reviewed-by: Alexandra Cherdantseva <neluhus.vagus@gmail.com>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
When there were additional spaces between the function definition and
the first parameter, the parser failed to parse it when it contained
another function (e.g. 'qlineargradient(... rgb() ...)').
The reason for this was that ::until() needs the function at index-1 so
it can correctly count the opening parenthesis.
Fixes: QTBUG-61795
Change-Id: I992f556e7f8cd45550f83bc90aa8de2b4e905574
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The flakiness was reported for macOS 10.8 a long time ago and I
am not able to reproduce it, so lets remove the workaround for
it.
Task-number: QTBUG-32690
Change-Id: I92e64065c7480b8f4c5d1d1e6cb5fdd218a70313
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Use a template on the size of the char[], as suggested by Ville
Voutilainen. This resolves ambiguity about whether such look-ups
should be done via QString or QCborValue (not that it would have made
any difference).
When we come to add mutating indexing of QCborValue, chained
dereferences like map[i][j][k] need to stay in operator[] const
throughout, to avoid detaching intermediates to create references into
them due to using the mutating operator[] on the earlier dereference's
return. So const-qualify the QCborValue operator[] const variants at
the same time, to match those of QCborValue itself.
Change-Id: Ib1652ae9440fe3767a653afa2856b74040210e07
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch adds the missing overload for QRegularExpression to match the
QRegExp one for QPlainTextEdit.
[ChangeLog][QtWidgets][QPlainTextEdit] Added QRegularExpression find()
method overload.
Change-Id: Id156971d3fa0372712bfa8b72a55550942a767e0
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: David Faure <david.faure@kdab.com>
This patch adds the missing overload for QRegularExpression to match the
QRegExp one for QTextEdit.
[ChangeLog][QtWidgets][QTextEdit] Added QRegularExpression find() method
overload.
Change-Id: Ic7be224dcc59fc8d832daddd1999a713b7f04253
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: David Faure <david.faure@kdab.com>
Theoretically, it could improve the speed. Some of the modified lines
also make the style homogeneous.
Change-Id: Iaed7b16fa75e485be0f825220c366903525448ce
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Make the code consistent with the DomProperty::write() method.
Task-number: QTBUG-70613
Change-Id: I622b4a019a4473823584de97304f8324f2cf0c6b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
52f1692b84 introduced a possible fix for
this flaky test. Therefore unblacklist them to see if the change really
fixed the issue.
Task-number: QTBUG-64639
Change-Id: I759d66aac7641505487e88254d16750e87c97350
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
QTable/QTreeView did not follow the documentation and returned
their needed size with scrollbars within viewportSizeHint().
Then sizeHint() also took the size of the scrollbars into account
when the policy was set to ScrollBarAlwaysOn.
This lead to different results when the widget was shown/hidden and/or
the scrollbar was visible or not.
Fix it by only adding the additional size when the scrollbars are
really visible. Also use header->isHidden() instead of isVisible() in
QTreeView the same way it is done in QTableView.
[ChangeLog][QtWidgets][QAbstractScrollArea] QTableView/QTreeView are
now reporting their viewportSizeHint() correctly taking into account
its scroll bars visibility and visibilityPolicy.
Task-number: QTBUG-69120
Change-Id: If50959a9f7429275e3e33122644c978fb64972ba
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Perform a @Nx image file lookup when loading pixmaps.
Make drawBackgroundImage() handle high-dpi pixmaps,
here the layout calculations needs to be in device-
independent pixels
Fixes: QTBUG-36825
Change-Id: I61e6f53c59f61f3bd88c34a036349e51e8c8ad92
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Usually we focus in when we receive a click or equivalent.
QGraphicsScene by default also transfers the focus when you start a
touch on a trackpad or similar. Most of the time this also generates a
synthetic mouse click, so people don't necessary notice. However, at
least on macOS you can configure this behavior. With focusOnTouch
switched off, QGraphicsScene behaves as one would expect on macOS.
Fixes: QTBUG-59442
Change-Id: Ib87112640eef6b77892ad2490d80eedd055e6dce
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This patch enabled json1 support for sqlite3 by defining
SQLITE_ENABLE_JSON1
[ChangeLog][QtSql][SQLite] Enable the json1-extension for
the SQLite3 plugin
Task-number: QTBUG-63498
Change-Id: Iaf1069ff1396c573125a5a3f490c0df5df560468
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The matatype should not keep manually maintained list of stream
operators. The patch adds automatic detection for all builtin types
so load and save functions pick the right delegate automatically.
This change exposed some existing anomalies:
- char is enforced to be signed while it seems that just calling
the operator directly does not have that feature.
- [unsigned] long type is always upgraded to [unsigned] long long
- QCborSimpleType doesn't have the data stream operators while
metatype is able to stream it through casting
Change-Id: I51178d6acd97d0585a6089e30ddd6acb2a29af54
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: Ife72db5a0d7cb8abe55c60c519087e2b60f26990
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This is a regression from commit 346c15102b, which creates a new QRegExp
in setFilterRegExp, losing previously set case sensitivity property
(i.e. when the code does proxy->setFilterCaseSensitivity(Qt::CaseInsensitive)
before setFilterRegExp).
Interestingly that commit ensured that setFilterFixedString would still
preserve CaseSensitivity, but not setFilterRegExp(QString).
Change-Id: I3d37d001ce6e86dd90e7e07431440a42607172f9
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
When a time-zone does a spring-forward, skipping an hour (either to
start DST or to move its standard time), there's an hour that doesn't
exist on the day in question. That hour can be the first hour of the
day, in which case using 0:0 as the default time is broken. So catch
this case and use the first time that day that makes sense.
Fixes: QTBUG-70823
Change-Id: I23dae9320a3cdd2c988841a7db1b111edb945730
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Moc shouldn't artificially introduce calls to possibly overloaded
operator&. It can cause odd side effects in a user code.
Change-Id: Iaa1b491fe6a1a5ebd4dfa1172359dc792cc7604f
Fixes: QTBUG-68191
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There is not reason why it should be kept in secret. Not having public
accessor forces a user code to keep a copy of the id. Visible for
example in QML (QQmlValueType).
Change-Id: If0de65fb8d91bcd50880c66b5f87c68f6d888dd3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Move the creation of the symbolic link/junction from the _data() slot
into the actual test function. The parameters are passed by a newly
introduced struct. This ensures only the symbolic links/junctions that
are actually needed are created. It can then no longer happen that
filtering for one data row invokes recursive deletion of the mountpoint
junction.
Also use of the newly introduced convenience createSymbolicLink()
in canonicalFilePath()
Task-number: QTBUG-63989
Change-Id: Ia78fd4ad6097136934ab5a375f4c352713d0f115
Reviewed-by: Orgad Shaneh <orgads@gmail.com>
Using std::vector saves a bit c++ code when using range-for loop over
the vector.
Besides, no shared copies created anymore which is a bit faster.
Change-Id: I564306ed9ac907e9f32f59b33ed15c027a59b4eb
Reviewed-by: David Faure <david.faure@kdab.com>
QUrl::RemoveAuthority is RemoveUserInfo | RemovePort | 0x10, so the
condition
if (options & QUrl::RemoveAuthority)
would match if any of the other bits for the username, password or port
were set, which meant we would skip the host comparison. Ditto for
username and RemovePassword.
[ChangeLog][QtCore][QUrl] Fixed a bug that caused QUrl::matches to
incorrectly compare two URLs with different hostnames or different
usernames as equal, if certain QUrl::RemoveXxx options were passed.
Change-Id: I015970a03b874898bba7fffd155856ab9d6cb1be
Fixes: QTBUG-70774
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
