Even though GtkColorChooser provides a "color-activated" signal, it
does not get emitted whenever the selection in the dialog changes, but
only when a color is activated in a sense that the dialog is accepted.
Switch to the "notify::rgba" signal to get proper live notifications
of the selection changes.
Task-number: QTBUG-55298
Change-Id: I39ab798764c8b42a998d75c56605948eaf154dcd
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Dmitry Shachnev <mitya57@gmail.com>
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
A workaround for the missing currentFontChanged() signal was added in
130f43c. Now we can remove the improper emission on accept, because by
using the "notify::font" signal gives proper notifications whenever the
current font selection in the dialog changes.
Task-number: QTBUG-55298
Change-Id: Id9a4f32a92f0be8f466a0a0587bb2acd4c9056f7
Reviewed-by: Dmitry Shachnev <mitya57@gmail.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
plugins.qmltypes should never be built into resources, but always
deployed on the file system so Qt Creator can read it.
Task-number: QTBUG-52297
Task-number: QTBUG-52299
Task-number: QTBUG-52940
Change-Id: Ieadb82bcb71dd4fb769fa0b7d15ec74e12ce7b42
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The platform is not supported since Qt 5.7
Task-number: QTBUG-55331
Change-Id: I3a6027661c2d597158999fe9665e76b1db18a9de
Reviewed-by: Martin Smith <martin.smith@theqtcompany.com>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
The clientRect might be empty when creating a window of zero size. The
side effect of a division by zero is that matrix transformation fails
and hence the swapchain gets into an invalid state.
Change-Id: Idbaed72deadb7b87052ac27e194a40d1810e6f7a
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
In a parallel build we may end up copying the qmldir file at the same
time, which doesn't work on Windows due to file locking. Apply the same
guard for the copying condition as in commit
770a0c91f3.
Change-Id: Ia34395e8654acf192b94e7ea6d0137730e4ea027
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The qmldir file is needed in the build dir for non-installed
static builds, so that qmlimportscanner can work.
Change-Id: I9028db6d1e36da5a2be9b0c1ba4c9d475edd5cb5
Task-number: QTBUG-53926
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
In any code (such as QtQuick Flickable) which calculates velocity as
distance / time, it's unrealistic to simulate instantaneous touchpoint
movements. So, force a slight delay before each event, so that
the touchpoint can only move very fast, but not infinitely fast.
We use qSleep() rather than qWait() because qWait() has a minimum
qSleep(10), and also processes events. commit() also conditionally
calls processEvents(), and we don't want to make that unconditional.
Change-Id: I3cee890f8951d7ecb8837a6abe216c5a8e0a6e34
Reviewed-by: Liang Qi <liang.qi@qt.io>
The Qt logo has changed (see http://brand.qt.io/ ) but it had not been
updated in the QMessageBox::aboutQt dialog, yet.
Task-number: QTBUG-55137
Change-Id: I81431e44efe65f576e62b92214aa835b82675d00
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Task-number: QTBUG-54951
Change-Id: Iba031a9038aad00e0d06f608eac8d95184ca6950
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
We used to check if the SDK used by a project is less than 8.0 and error
out if so. The intention of the test was to avoid a situation where a
project is built with an SDK that is older than the one used to build Qt,
but this was obviously bogus, as Qt could have been built with a newer SDK
than the oldest supported one. Also, 8.0 has been outdated for quite a
while.
On top of that, the check failed now that the major iOS version has two
digits.
So let's remove the check for now, until we can handle this in a better
way.
See QTBUG-37592.
Change-Id: I6106b9521b5d47d9906d4db30c2ffa21794bc307
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
When xcodebuild in Xcode 8 beta dumps out the available
destinations, it prints an extra section called 'Ineligible
destinations for the "tst_someTest" scheme'.
Those destinations doesn't contain valid ID-s for the script to
use, which will result in "make check" failing.
This patch will filter out devices that are marked as placeholders.
Change-Id: I88a25b7307e21b76c6f7764a82f67627aae8f02f
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
As of version 10.12 (Sierra), the name of Apple's desktop operating
system will be macOS. Change the occurrences where the Mac platform
is discussed to use a macro \macos, which expands to 'macOS'. This
helps with adapting to future renaming.
Update the instructions on mac-specific Q_OS_* macro usage.
Add a \target for the old 'Qt for OS X' topic to keep links working
for other documentation modules that try to link with the old name.
Change-Id: Id33fb0cd985df702a4ae4efb4c5fd428e77d9b85
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Simply allocate objects on the stack instead of the heap.
Change-Id: Ic047d78e49668878821cce1c8ab599a8551b6476
Reviewed-by: David Faure <david.faure@kdab.com>
In QStringListModel, the display and the edit roles are synonyms,
so when one is changed, the other changes with it. However, in
setData() we only emitted a vector with just the role that was
passed in by the user.
Fix by always passing both roles, regardless of which one was used
to set the data.
Change-Id: I498e7cb33796fae266901817b01ad85d861d4bb4
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This gives a chance for some cleanups at least.
Change-Id: I3a628e32c6fc8c7fa00943769210c517005f2a0a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When pressing the Command key, or any other modifier key,
Cocoa will filter whatever the application has set in the
QDrag object. However, Qt is already taking all this into
account, so we should not let yet another voice chime in.
Task-number: QTBUG-55177
Change-Id: I7c56e72d846d10cdfc132776bdfdd6b79799bcff
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Visual Studio automatically defines _WINDLL when building a DLL,
regardless of project settings
(https://msdn.microsoft.com/en-us/library/8x480de8.aspx). This define
is therefore widely used to detect DLL vs. static library or executable
build target on Windows.
For makefiles, _WINDLL need to be manually defined, which QMake failed
to do so far.
Task-number: QTBUG-55183
Change-Id: Ic62201666c44e730e6881706d568ce9eaf22b7a4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This doesn't cover FBOs bound directly with glBindFramebuffer(),
but it's perfect to create a fast path for code we know uses QOGLFBO,
thus avoiding expensive glGetIntegerv() driver calls.
The use case is to use this in QSG24BitTextMaskShader::activate(), where
we need to check if the current FBO is sRGB capable.
Change-Id: I434eeeb7e6a3d16be9327315536ad7280245085d
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
I am not convinced toUpper/toLower is a generally sound solution here;
however, QLocale doesn't make the upper/lower case distinction this
parser does and a bug report shows tr() isn't doing an adequate job.
Task-number: QTBUG-47815
Change-Id: Iaf654d1d76d4c38d74fc647e168d50debb924a8f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
According to documentation, waitForReadyRead() returns 'true' if
the readyRead() signal is emitted and there is new data available
for reading. Thus, waitForReadyRead() is being blocked in cycle
until canReadNotification() will return 'true'. This patch
adjusts canReadNotification() to return 'true' only when new data
arrives on buffered socket that ensures waitForReadyRead() to
succeed correctly.
Change-Id: Ic38c4a4dd8ef9128f04b6c1d5f3d03068f6c9894
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The deleteLater() call wasn't reliably reached when tests fail,
so use a QScopedPointer with QScopedPointerDeleteLater deleter.
Change-Id: Ica73bc73c2a0ac1e9b77e4804f2aedcad9b662a0
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
The test no longer writes to SRCDIR, so don't try to remove
generated files from there, either.
Amends bb5570082e.
Change-Id: I1d5df88b1865f3dbd914ec71147de61e173f2f4e
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Value was inverted.
Found by own code review.
Change-Id: I2027d97e1f9d52f6d79fb72ecad9ee2034f9af25
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
QAndroidEventDispatcherStopper is stopped when the application is in background
and the user uses the task manager to kill the task. If the application has
services the task manager doesn't kills it, but instead it tries to gently
terminate the activity. The problem is that the activity is still backgrounded
(meaning that the Qt event loop is freezed), therefore terminateQt will hang.
Task-number: QTBUG-54012
Change-Id: I6e333cbcaf41e9e298eeb8b2b0bc3adcf446783f
Reviewed-by: Christian Stromme <christian.stromme@qt.io>
The spec, added in 5.7.0, simply defined WIN_INTERFACE_CUSTOM, leading
to the generic, non-X11 typedefs for the EGL native types. This is
fine for the typical embedded use, but is not what is wanted when
targeting xcb, and leads to disabling EGL-on-X support.
Therefore, move the define into a comon header and let the individual
libs decide by defining or not defining QT_EGL_NO_X11. This sets both
MESA_EGL_NO_X11_HEADERS and WIN_INTERFACE_CUSTOM in qt_egl_p.h.
This way Qt builds supporting all three of eglfs (DRM+EGLDevice),
wayland, and xcb (EGL) can be generated out of the box.
[ChangeLog][Platform Specific Changes][Linux] xcb with EGL and OpenGL
ES, as well as eglfs with the eglfs_x11 backend, are now supported on
DRIVE CX boards when using the linux-drive-cx-g++ device spec.
Done-with: Louai Al-Khanji <louai.al-khanji@qt.io>
Task-number: QTBUG-55140
Change-Id: I6f186d16612e170995e3bca1214bcabad59af08e
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
QStyle was created but never removed
Change-Id: I55011377afd475af28e4ce2cf657e435dd37c96a
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
This warning has been introduced by VS2015 Update 3 and is not in our
control as the warning happens inside the system headers. To keep the
compile output clean, disable this warning.
Change-Id: I96253538c6d6774bb91cd5a4ea80dda2910e74b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
26238aca8c causes double deletion of the
QTouchDevice in case the post routine already cleaned up the list by the
time the touch handler gets to do it.
Just check the list of devices to see if the one we hold is still there.
If not, the pointer is likely to be a dangling one so do nothing.
This will avoid dying with bus error or similar on application exit.
Task-number: QTBUG-51562
Change-Id: I50c1edee7405aad308274538219698388c2cc9f9
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
ICC supplies a math.h header that defines things like:
#define isnan( __x__ ) __IMFC99MACRO1ARG_ALL( __x__, isnan, __, f, __, , __, l)
So use the already-existing workaround for it.
Since Qt 5.7 requires C++11, we can remove the check for that.
Change-Id: I149e0540c00745fe8119fffd1463cc5caf341337
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The first part adds QTabBarPrivate::initBasicStyleOption()
which is basically QTabBar::initStyleOption() but
without the expensive QFontMetrics::elidedText() call.
That is because QTabBar::tabSizeHint() would call
initStyleOption() and then immediately discard the result
of that computation.
Then, QTabBar::tabSizeHint() is modified to cache the calls
to QFontMetrics::size(), which is also expensive. The cache
is invalidated when the style or the font changes, or when
the elide mode is set.
Change-Id: I591b2e401af3576a2ebabc5b94f19ae157e28cf2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Wayne Arnold <wayne.arnold@autodesk.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
This is only when the attached MIME data contains text, and we
fall back to rendering that text into a pixmap. It requires
getting the device pixel ratio from the source which, for now,
may be a QWidget or a QWindow. Other cases may exist, but that
would bring more dependencies than desired.
Similarly, it fixes the draggabletext example. Other examples
would require either to get updated pixmaps or change substantially
in order to support HiDPI (e.g., the fridgemagnets example).
Change-Id: I66198214233e3e06c87505744e2aaa9691fe1bb6
Reviewed-by: Filipe Azevedo <filipe.azevedo@kdab.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Otherwise we can fail to stretch the last section when adding new
sections.
Task-number: QTBUG-52446
Change-Id: I7eb5267ac500bf4246e57c3e3a43268bb65ef1f7
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Enable switching application to fullscreen mode. This is mostly required
for desktop targets of WinRT.
Task-number: QTBUG-54517
Change-Id: I67e4020bc2ec8da86d94815e5765959f4ae2b63f
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
The text is correctly describing the gradient from gray to blue but the
picture shows white to blue. Additionally including the SVG sources for
creating the pictures.
Change-Id: I608a239f4de9c2d3761196c44db024cc31ce441a
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
To make sure it does not end up picking the desktop OpenGL implementation
from Mesa that may be present in the sysroot.
Change-Id: I815eb7d2664f9e62d620acf8260cae40f83dfaf8
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
