This reverts commit 6a93ec2435.
Reason for revert: Breaks qtdeclarative build, submodules need
to be clean before we deprecate or remove APIs.
Change-Id: Id0726b9bfad6072065b380b44b6ff6dffda79e45
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
These special member functions have no purpose.
We never *documented* their semantics. Any code using them is
unconditionally wrong (which semantics was it assuming?), so we can
accept the SIC (type A). If a user needs such a copy, they would have to
reason on the intended semantics (relaxed? acquire/release?) and be
explicit in their code. Especially for assignment, they would need
understand the consequences of the memory ordering that apply on _each_
atomic object involved and not on the assignment operation as a whole
(there are no such semantics).
Testing this change on qtbase has already found bugs.
From a purely technical point of view: we don't guarantee lock-free
atomics nor we require them from the underlying platform. An atomic is
therefore allowed to be implemented as a mutex protecting a value, and
mutexes are not copiable. std::atomic follows the exactly same pattern
(not copiable nor copy-assignable) for exactly the same reasons, and Qt
atomics are implemented on top of std:: ones.
[ChangeLog][QtCore] The copy constructor and assignment operators of
Qt atomic classes (QAtomicInteger, QAtomicPointer) have been removed.
Their usage in user code should be considered a programming error, as no
memory ordering semantics were ever documented for these operations (and
therefore relying on any specific semantic would be relying on
undocumented, unportable behavior). This matches the API of the
std::atomic class in C++. Note that you can still use explicit
load/store operations to transfer a value across two Qt atomic objects,
and therefore use the memory ordering specified for the load/store
operations.
Change-Id: Iab653bad761afb8b3e3b6a967ece7b28713aa944
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Then we can easily test how fromLocal8Bit() and toLocal8Bit() behave
with different code-pages.
Pick-to: 6.6 6.5
Task-number: QTBUG-118318
Task-number: QTBUG-118185
Task-number: QTBUG-105105
Change-Id: Ib1cd3bccd27d598f4c80915557e332befcd96354
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove qt_poll_msecs() since the "forever" state can be simply expressed
with a QDeadlineTimer::Forever arg, instead of passing a nullptr
timespec, and the negative timeouts treated as "run forever" is also
encapsulated by QDealineTimer.
Use the QDealineTimer(qint64) constructor in the call sites where
the timeout could be negative, so that it creates a Forever timer (the
QDeadlineTimer(chrono::duration) constructor uses
setRemainingTime(duration) which handles negative timeouts by creating
expired timers).
Remove qt_gettime() (and do_gettime()).
Drive-by changes:
- Fix a narrowing conversion warning, qt_make_pollfd() takes an int
- Remove an unused include
Change-Id: I096319af5e191e28c3d39295fb1aafe9d69841e6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When the array type is QJniObject or a subclass, then we need to
explicitly release the local reference returned by GetObjectArrayElement
in the QJniArray::at implementation. Do this by constructing the
QJniObject via fromLocalRef, which does exactly that.
Amends 80d4d55e25.
Add a test case that stresses the local reference pool, and fix the old
test case (which operates on a QJniArray<jobject>) to also release the
local references.
Change-Id: Ie293b1db9f1b6825376bbf12338b22dfc3f8c6e9
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
The format is changed from 6.7 to support more than UINT32_MAX - 1
elements. The format used to have a quint32 size. Now if the size is
larger or equal to 0xfffffffe (2^32 -2) the old size is an extend
value 0xfffffffe followed by one quint64 with the actual value. The
32 bit size with all bits set is still used as null value.
Fixes: QTBUG-105034
Change-Id: I62188be170fe779022ad58ab84a54b1eaf46e5d9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][QStringList] Added lastIndexOf() overloads that take
a QString/QStringView/QLatin1StringView and a Qt::CaseSenitivity
parameters. Prior to this calling lastIndexOf() would call the methods
inherited from the base class. This change is source compatible and
existing code should continue to work.
Task-number: QTBUG-116918
Change-Id: Ia50c884c00021bf581c23c12e0e0c22700dae446
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][QStringList] Added filter(QLatin1StringView)
overload, which is more optimized when searching for a Latin-1 string
literal as no conversion to QString is necessary.
Task-number: QTBUG-116918
Change-Id: Ieb92f4cfd545b070258dbc5c701ddfb2e6f3fc64
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][QStringList] Added indexOf() overloads that take
QString/QStringView/QLatin1StringView, and a Qt::CaseSensitivity
parameter. Prior to this using QStringList::indexOf() called the methods
inherited from the base class.
Task-number: QTBUG-116918
Change-Id: Ibc42130b6509f6ecfe7de0d6be378f226ae61982
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Now that users can pass a QStringMatcher to do the matching, change the
existing overload to not use QStringMatcher.
Thanks to Giuseppe D'Angelo for the idea of passing a QStringMatcher to
filter instead of using a magic number to decide whether to use
QStringMatcher or not.
Results of running filter() and filter_stringMatcher, times are in msecs
and this was compiled with gcc -O3:
Without With QStringMatcher
list10 0.00022 0.000089
list20 0.00040 0.00014
list30 0.00058 0.00018
list40 0.000770 0.00023
list50 0.00094 0.00027
list70 0.0012 0.00037
list80 0.0014 0.00041
list100 0.0018 0.00050
list300 0.0054 0.0014
list500 0.0091 0.0023
list700 0.012 0.0032
list900 0.016 0.0041
list10000 0.17 0.045
Drive-by change: optimize tst_QStringList::populateList().
[ChangeLog][QtCore][QStringList] Added filter(const QStringMatcher &)
overload, which may be faster for large lists and/or lists with very
long strings.
[ChangeLog][Possible Performance Changes][QtCore][QStringList] Changed
the implementation of filter(QStringView) overload to not use
QStringMatcher by default. Using QStringMatcher adds overhead, so it is
beneficial/faster when searching for a pattern in large lists and/or
lists with long strings, otherwise using plain string comparison is
faster. If using QStringMatcher makes a difference in your code, you can
use the newly added filter(QStringMatcher) overload.
Change-Id: I7bb1262706d673f0ce0d9b7699f03c995ce28677
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Instead of the previous realpath() comparison resulting from the symlink
processing. parseMountInfo() was extracting the device number from
/proc, so this information was already readily available.
We must take care of anonymous block devices (major == 0). Certain
filesystems, such as btrfs, always use them, so we must still stat() the
device path to get the real block device.
This implementation assumes that udev only creates entries in the
/dev/disks/by-label directory that are symlinks to real devices, but
that must already be the case because they are in /dev in the first
place. An alternative implementation would be to compare the inode and
host device (st_dev) of the entry, if different /dev entries could have
different labels. I don't think that's possible. But multiple /dev
entries for the same device is definitely possible.
Pick-to: 6.6
Change-Id: I9d43e5b91eb142d6945cfffd1787552af3d09676
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Otherwise we have no way of knowing which QStorageInfo entry was being
tested.
Previous:
FAIL! : tst_QStorageInfo::storageList() 'other.isValid()' returned FALSE. ()
Now:
FAIL! : tst_QStorageInfo::storageList(/run/user/0/gvfs) 'other.isValid()' returned FALSE. ()
Change-Id: I8f3ce163ccc5408cac39fffd178d786e596ece81
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The existing pattern() method always returns a QString, which means that
if the matcher was constructed using a QStringView, pattern() would
uncoditionally convert it to a QString.
This is useful to check if a match is exact:
auto pattern = matcher.patternView();
if (pattern.size() == needle.size() && matcher.indexIn(needle) == 0)
....
This may be needed for a later change in QStringList::contains();
regardless of that, this change makes sense on its own.
Change-Id: I49018551dd22a8f88cf6b9f878a5166902a26f58
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For those that simply repeat or skip a whole calendar day, life is
fairly simple. However, Alaska's 24-hour transition at 15:30 LMT Sitka
(incidentally combined with a change of calendar) is a bit trickier.
Also fix a typo I noticed in passing.
Write tests to determine what the actual behavior is and document
enough to make the actual behavior seem unsurprising once encountered,
without trying to go into all the excruciating details. Naturally, MS
time-zone data lacks the data on the historic transitions involved in
these tests, so MS (when not using ICU's time-zone data) is excluded.
It seems Cupertino believes Alaska was always in the USA, too.
Change-Id: Ia638c04d2ffc3a956a70a2a85badb7bbfdbb791c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Previously, requesting a time that got repeated - on the given date,
due to a fall-back transition - would get one of the two repeats,
giving the caller (no hint that there was a choice and) no way to
select the other. Add a flags parameter that captures the available
ways to resolve such ambiguity or select a suitable time near a gap.
Add such a parameter to relevant QDateTime methods, including
constructors, to enable callers to indicate their preference in the
same way. This replaces DST-hint parameters in various internal
functions, including QTimeZonePrivate's dataForLocalTime(). Adapted
tst_QDateTime to test the new feature.
Adapt to gap-times no longer being invalid (by default; or, when they
are, no longer having a useful toMSecsSinceEpoch() value). Instead,
they don't match what was asked for. Amend documentation to reflect
that. Most of the code change for this is to QDTParser and QDTEdit.
[ChangeLog][QtCore][QDateTime] Added a TransitionResolution parameter
to various QDateTime methods to enable the caller to indicate, when
the indicated datetime falls in a time-zone transition, which side of
the transition to fall or whether to produce an invalid result.
[ChangeLog][QtCore][Possibly Significant Behavior Change] When
QDateTime is instantiated for a combination of date and time that was
skipped, by local time or a time-zone, for example during a
spring-forward DST transition, the result is no longer marked invalid.
Whether the selected nearby date-time is before or after the skipped
interval may have changed on some platforms; unless overridden by an
explicit TransitionResolution, it is now a date-time as long after the
previous day's noon as a naive reading of the requested date and time
would expect. This was the prior behavior at least on Linux.
Fixes: QTBUG-79923
Change-Id: I11d5339abef9e7125c4e0dc95a09a7cd4f169dab
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... adding a bit of test coverage of keysToValue().
This is not intended as a reproducer for QTBUG-118240, because that
is concerned with inputs valueToKeys() cannot produce.
Task-number: QTBUG-118240
Pick-to: 6.6 6.5 6.2 5.15
Change-Id: I5d772be4231717cdbb5d033b1f11ae31e4c57c0b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The comment in this function made it clear that it really depended on
the size of the pipe buffer in the OS. I don't see a way to make a pipe
default to a different size on Linux -- it always defaults to
PIPE_DEF_BUFFERS (16) and that value is only increased as a result of
fcntl(F_SETPIPE_SZ), which we don't do. But we can be defensive and
simply write until the OS can't take any more data.
Drive-by update the comment on Windows to be clear that bytesToWrite()
does work, but only while the child process is still running.
Pick-to: 6.6
Task-number: QTBUG-80953
Change-Id: I9d43e5b91eb142d6945cfffd17866d22a4127e5e
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Amends commit 78d0b6e975 ("Ignore failing
test for free space on APFS") and merges it with the btrfs code, which
seems to have the same problem. But unlike Linux systems with btrfs,
Apple systems don't usually have another filesystem available so we
don't bother to try and find another.
Change-Id: I8f3ce163ccc5408cac39fffd178d7b4c13f0dfd1
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
These tests skip when we're writing to a btrfs filesystem because, for
some reason, the amount of free space does not update synchronously with
file writing. But instead of giving up if $TMPDIR is a btrfs, let's try
and use the $XDG_RUNTIME_DIR, which is usually a tmpfs.
This will work in the CI for the openSUSE set ups, where / is btrfs,
/tmp is not a separate tmpfs, but /run/user/1000 is available.
FAIL! : tst_QStorageInfo::tempFile() The computed value is expected to be different from the baseline, but is not
Computed (free) : 25510780928
Baseline (storage2.bytesFree()): 25510780928
Loc: [tst_qstorageinfo.cpp(234)]
Pick-to: 6.6
Change-Id: I8f3ce163ccc5408cac39fffd178d7af1c67ec988
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Almost all operations on a QJniObject require a QJniEnvironment,
including the construction and destruction of a QJniObject. Instead of
instantiating a temporary QJniEnvironment object in each call, store the
one from the constructor in the private, and reuse it.
Pass the stored environment through to other functions needing it, and
add a checkAndClearExceptions() wrapper.
Static class members still need their own QJniEnvironment, but we can
reuse the one we have to get both jclass and jmethodID rather than
creating new QJniEnvironments in several wrappers.
As a drive-by, clean up nullptr usage in the test that failed when
shortcutting isSameObject for the trivial cases.
Change-Id: Ibadbd2be8a0ec9ab62daf285608ee7fe0a3c8852
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Our signature mapping treats both e.g. bool and jboolean as "Z", and it
is allowed to pass a bool variable as an argument to a function expecting
a jboolean. Except for fields and callMethod return values, where we only
allowed the JNI primitive types.
Fix this by comparing the signatures and size of the type we have with
the JNI types that there are explicit functions for. Cast from and to
the JNI type in both directions to address narrowing (e.g. jboolean is an
unsigned char and converting to bool would be narrowing, even though
both are 8bit types).
This way we can get boolean fields using getField<bool>, and int fields
using getField<int> etc.
Change-Id: I2f1ba855ee01423e79ba999dfb9d86f4b98b1402
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
So we can more easily get any errors from attempting to write the file.
It is possible to get them with QFile, by either doing .flush() or using
QIODevice::Unbuffered, but using the C API is a definite sure way. Plus,
since this is QFileSystemEngine, this avoids the possibility that QFile
may choose to use a different file engine than the native one, for some
reason. And it reduces overhead.
This allows us to more easily detect why the file creation failed and
therefore stop looping if the error wasn't EEXIST. That will avoid an
infinite loop in case the necessary directories exist but aren't
writable.
It's also moved above the renaming, such that the failure to populate
the info file prevents the renaming too. Both operations can have the
same likely errors, ENOSPC and EIO. The likelihood of EIO is very low,
for both; but for ENOSPC it's far more likely for writing the
file. Avoiding the ENOSPC error for the renaming is handled in a later
commit.
Change-Id: I9d43e5b91eb142d6945cfffd1786d417142ac728
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Implements an iterator API and other standard member access functions
for sequential containers so that we can use ranged-for over an object
that is a jarray. Provides read-only access to individual elements
(which is mostly relevant for arrays of objects), or the entire data()
as a contiguous memory block (which is useful for arrays of primitive
types).
QJniObject call functions can return QJniArray<T> when the return type
is either explicitly QJniArray<T> or T[], or their Qt equivalent (e.g.
a jbyteArray can be taken or returned as a QByteArray). If the return
type is a jarray type, then a QJniObject is returned as before.
Arrays can be created from a Qt container through a constructor or the
generic fromData named constructor in the QJniArrayBase class, which
implements the generic logic.
Not documented as public API yet.
Added a compile-time test to verify that types are mapped correctly.
The function test coverage is added to the QJniObject auto-test, as
that already provides the Java test class with functions taking and
returning arrays of different types.
Change-Id: I0750fc4f4cce7314df3b10e122eafbcfd68297b6
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
These must pass, but they're highly unlikely to be trashable because
/var/tmp is usually not its own filesystem (it might be a subvolume of
its own, but usually isn't). Instead, it's usually part of / or /var.
On my machine:
openat(AT_FDCWD, "/var/.Trash", O_RDONLY|O_NOFOLLOW|O_CLOEXEC|O_DIRECTORY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/var/.Trash-1000", O_RDONLY|O_NOFOLLOW|O_CLOEXEC|O_DIRECTORY) = -1 ENOENT (No such file or directory)
mkdirat(AT_FDCWD, "/var/.Trash-1000", 0700) = -1 EACCES (Permission denied)
Change-Id: Ifeb6206a9fa04424964bfffd17884246a4d27443
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Both QTemporaryFile and QTemporaryDir are documented to use the current
directory if given a pattern. That can be anything & arbitrary, so it
doesn't give us consistency in checking. Moreover, it might be a read-
only directory.
Drive-by fix the number of 'X'.
Task-number: QTBUG-117449
Pick-to: 6.6
Change-Id: Ifeb6206a9fa04424964bfffd178841c44e9636a0
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
QtTest can't handle a test that does both. This ends up recorded as a
skip in the summary.
Pick-to: 6.6
Change-Id: Ifeb6206a9fa04424964bfffd1788412a438085b0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This base class implementation for COM objects provides IUnknown
interface implementation with reference counting which will allow to
keep all this functionality and implementation in the same place.
Pick-to 6.6 6.5
Change-Id: I8ec597b1040ac33295317e06338ffdcb61b78f85
Reviewed-by: Jøger Hansegård <joger.hansegard@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It was weird that they were missing. Now that C++23 added them to
std::span, add them to QSpan, too.
Pick-to: 6.6
Change-Id: I4a9b1fdeda66bc7b133c8f7b3b269656e5faffa3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This changes takes Qt for Android Java code away from the Delegate
classes that uses heavily Java reflection to invoke Activity/Service
calls and overrides. So instead of that, now, we have a QtActivityBase
and a QtServiceBase classes which handle the override logic needed for
Qt directly without reflection.
These Base classes extend Android's Activity and Service directly, and
are inside the internal Qt android package (under Qt6Android.jar).
For example, to handle onConfigurationChanged, instead of the current
way where we need this in QtActivityDelegate:
public void onConfigurationChanged(Configuration configuration)
{
try {
m_super_onConfigurationChanged.invoke(m_activity, configuration);
} catch (Exception e) {
e.printStackTrace();
}
handleUiModeChange(configuration.uiMode &
Configuration.UI_MODE_NIGHT_MASK);
}
And then this in QtActivity:
@Override
public void onConfigurationChanged(Configuration newConfig)
{
if (!QtLoader.invokeDelegate(newConfig).invoked)
super.onConfigurationChanged(newConfig);
}
public void super_onConfigurationChanged(Configuration newConfig)
{
super.onConfigurationChanged(newConfig);
}
And having to keep it's Method handles around and then use Java
reflection
to call the override behavior done by Qt and the superclass methods.
instead of that, we can do it now in QtActivityBase like:
@Override
public void onConfigurationChanged(Configuration newConfig)
{
super.onConfigurationChanged(newConfig);
handleUiModeChange(newConfig.uiMode &
Configuration.UI_MODE_NIGHT_MASK);
}
Then, we would still have our user facing QtActivity class which extends
QtActivityBase and benefit from the same implementation of Qt logic done
in the base class.
An additional benefit to this approach is that now QtActivity will be
very lightweight and doesn't need to have all the boilerplate code as
before.
[ChangeLog][Android] Simplify Qt for Android public bindings
(QActivity, QtService and QtApplication) by implementing base
classes which use the delegate implementions directly and avoid
reflection.
Task-number: QTBUG-115014
Task-number: QTBUG-114593
Change-Id: Ie1eca74f989627be4468786a27e30b16209fc521
Reviewed-by: Tinja Paavoseppä <tinja.paavoseppa@qt.io>
It noted that an unspecified function claimed the offset it was
checking should be +1, while testing it against that or -1. The
function turns out to be QDateTime::addDays(), whose doc did indeed,
misleadingly, say that it lands after a gap it would have hit. It in
fact overshoots the gap in the direction of its change. Amend its
docs, likewise those of addMonths() and addYears(), to reflect the
true behavior.
Amend the test to look at the direction of the step its taking and
anticipate that the adjustment will be in the same direction; then
compare the actual adjustment to that.
Change-Id: I9ab918fac0ab2195ef014983f37fccc435bf0498
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The implementation previously worked for non-short date-times, where
the offset has been remembered since construction. This included the
case of zoned times (and local times more than 2^55 msec away from the
start of 1970) that hit a spring-forward's gap; but excluded local
times that did the same (within 2^55 msec of the epoch).
This precluded an offset check in a spring-forward test, now added.
We can in fact determine the offset whenever we got a valid date and
time (we do so in the course of initializing the object, and when
asked for toMSecsSinceEpoch(), even when invalid), and we should not
use the value of the recorded offset if we didn't get a valid date and
time, so amend to always return 0 if we didn't get valid date and time
and always report the correct offset otherwise.
In the process, amend offsetFromUtc()'s computation to directly
resolve the date-time, rather than doing so via toMSecsSinceEpoch(),
which has to repeat decision-making offsetFromUtc() has already done
by the time it calls it. Also amend toMSecsSinceEpoch() to return 0 if
we didn't have a valid date and time to begin with, so it only
attempts to produce a useful result in the case where construction
attempted to resolve the date-time.
Change-Id: I6574e362275ccc4fbd8de6f0fa875d2e50f3bffe
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The resolution selects a point in time outside the gap, which will be
represented by toMSecsSinceEpoch()'s return, despite the QDT object's
isValid() returning false. Previously we retained the
originally-calculated msecs, so as to keep date() and time() matching
what was asked for. However, this required adjusting offset, which was
not remembered for local times within 2^55 milliseconds of the start
of 1970. This lead to an inconsistency between the offset from UTC
reported for the resolution for a local time further from the epoch,
or for a time-zone, and the actual offset from UTC at the time
indicated by the return from toMSecsSinceEpoch().
Instead, retain the actually calculated offset (even if we aren't
going to remember it) and adjust the msecs to the value that ensures
toMSecsSinceEpoch() will get the selected resolution. This
incidentally means that, when toMSecsSinceEpoch() has to re-resolve
(for a local time within 2^55 msecs of the epoch), it avoids
revisiting the complications of hitting the gap.
In passing, change internal stateAtMillis() to take the QTimeZone it
is passed by const reference, to save a copy (noticed during debug).
Also tweak a comment in a test to be explicit about a default value.
[ChangeLog][QtCore][Possibly Significant Behavior Change] When
QDateTime is instantiated for a combination of date and time that was
skipped, by local time or a time-zone, for example during a
spring-forward DST transition, the invalid result's time() - and, in
rare cases, date() - no longer match what was asked for. Instead,
these values and offsetFromUtc() now match the point in time
identified by toMSecsSinceEpoch().
Change-Id: Id61c4274b365750f56442a4a598be5c14cfca689
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Since it hides QFile's overloads this was not supported for
QTemporaryFile.
[ChangeLog][QtCore][QTemporaryFile] Added support for passing
std::filesystem::path to rename and createNativeFile.
Change-Id: I909ff1d5b9c586824c9901d7dad278dfad09ffc3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Added moveToTrashDuplicateName() to see what happens if you attempt to
trash two files with the same exact full path. Both files should get
independently moved to the trash bin and not clobber each other.
Added moveToTrashXdgSafety() to test that QFileSystemEngine will
properly skip over an unsafe $root/.Trash directory, as required by the
XDG specification. I think the specification should also make security
requirements on $root/.Trash-$uid too, but that's for another change.
Pick-to: 6.6
Change-Id: I9d43e5b91eb142d6945cfffd1786cd60e4244c7c
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
qnativesocketengine_win.cpp: don't check if timeout is < 0, because
remainingTimeAsDuration() doesn't return negative values.
All the changes done in one go, not function by function, as that causes
the least churn. You can think of them as a couple of very similar
changes repeated various times.
Drive-by change: replace `forever {` with `for (;;)`
Task-number: QTBUG-113518
Change-Id: Ie9f20031bf0d4ff19e5b2da5034822ba61f9cbc3
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Construction from nullptr wasn't, before, because it was using the
QPointer(T*) constructor, which cannot be constexpr. Add a constexpr
QPointer(std::nullptr_t) constructor to enable this use-case.
This requires to mark the (T*) constructor as Q_WEAK_OVERLOAD,
otherwise legacy construction from a literal 0 would be ambiguous.
No documentation changes needed, as the set of valid expressions
(apart from constinit'ing) has not changed. Mention the nullptr ctor,
though, without \since.
Add a test to confirm that contruction from derived still works.
Change-Id: If9d5281f6eca0c408a69f03fecba64a70a0c9cf0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Ignore expected warning messages when looking up classes, methods, or
field that don't exist. Make the test implicitly fail for any other
warning messages.
Change-Id: I79ec799102b1ab9424aa39c5255413931b8ad152
Reviewed-by: Petri Virkkunen <petri.virkkunen@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
In non-static builds, of course.
Change-Id: Ifbf974a4d10745b099b1fffd1777ac97c0921759
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Construction from nullptr isn't, because it's using the QPointer(T*)
constructor, which cannot be constexpr.
Pick-to: 6.6 6.5
Change-Id: I19129a0fca5873e83d20351a909a7994399bfcce
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Initialize QStringList with an initializer_list instead of old style
operator <<()
- Use Qt::StringLiterals more, better readability
- Test CaseSensitivity
Change-Id: If7dde14333d54b8c2f682036634ad94d5f9f9c74
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The jbyte type is a signed char, which also promotes to int in variadic
argument functions.
Extend the test case to make sure that we don't get any warnings for
the most relevant parameter types.
Change-Id: I7811e1eebdbc989ab5989eb1a2c502acd0540bc7
Reviewed-by: Juha Vuolle <juha.vuolle@qt.io>
Reviewed-by: Zoltan Gera <zoltan.gera@qt.io>
Implement the missing overload to handle UTF-8 specific data types,
including char8_t (C++20), char, uchar and signed char.
Introduce the helper function 'assign_helper_char8' which handles the
non-contiguous_iterator case. The contiguous_iterator case is already
handled by the QAnyStringView overload.
Include 'qstringconverter.h' at the end of the file, since it can't
be included at the top due to diamond dependency conflicts.
QStringDecoder is an implementation detail we don't want users to
depend on when using assign(it, it). It would be unnatural to not
be able to use a function just because we didn't include an
apparently unrelated header.
[ChangeLog][QtCore][QString] Enabled assign() for UTF-8 data types.
Fixes: QTBUG-114208
Change-Id: Ia39bbb70ca105a6bbf1a131b2533f29a919ff66d
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
We want to test the traits even on nonsensical types.
Change-Id: I63ed022c9529d9de9d336157e6f025937321ca16
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Now that QtJniTypes::Objects are no longer primitive types that are the
same as a jobject, using those types in registered native functions
breaks. JNI will call those function with a jobject on the function
pointer, and lacking any type safety, the call to the registered
function will proceed with a wrong type of object on the stack.
To fix that, register the native function via a proxy that is a variadic
argument function, and unpack the variadic arguments into a list of
typed arguments, using the types we know the user-code function wants.
Then call the function with a tuple of those types using std::apply,
which gives us type safety and implicit conversion for free.
Add a test that exercises this.
Change-Id: I9f980e55d3d13f8fc16c410dc0d17dbdc200cb47
Reviewed-by: Juha Vuolle <juha.vuolle@qt.io>
