Most of QtDBus already needs very little from libdus-1, so create an
extra header containing the minimum API we actually need.
One large advantage of this solution is that now QtDBus can always be
enabled, even if the system doesn't have libdbus-1 installed. This is
interesting on OS X, where libdbus-1 is often installed by Homebrew or
MacPorts, which may include extra libraries we don't want in our
packaging.
Change-Id: I1b397121ec12eeca333ef778cf8e1c7b64d6b223
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Conflicts:
dist/changes-5.4.0
7231e1fbe2 went into 5.4 instead of the
5.4.0 branch, thus the conflict.
Change-Id: I70b8597ab52506490dcaf700427183950d42cbd1
sizeHint() did it exactly like this, but minimumSizeHint() didn't,
which made it too small. Didn't affect the actual size in most cases
since the vertical size policy is fixed, so sizeHint() is called instead.
But when writing a subclass, if one re-implements sizeHint() by
calling the QLineEdit's minimumSizeHint(), it would then be wrong,
when text margins are used.
Change-Id: I29ae8dcab00842b3b5ca534cdb250efc0b496f45
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
[ChangeLog][QtNetwork][QtSSL] It is now possible to choose which elliptic
curves should be used by an elliptic curve cipher.
Change-Id: If5d0d58922768b6f1375836489180e576f5a015a
Done-with: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
The enum was made public in f84b00c6d2, but this
makes it follow the convention to camel case acronyms too before it's too late
to change it.
Change-Id: Ibb81e9221cb73fe0502d0a26f2d73512dd142f08
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When a popup is opened it grabs the input, but the leave event to the other
windows needs to be sent.
Remove the popupEnterLeave test as it did not test any code. The Popup
never gets any enter or leave events so it will succeed always succeed
Task-number: QTBUG-36862
Change-Id: I625c616eeb74b5168af7b751485e2a9a53b76cd3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
This makes it follow the coding style, which says to camel case acronyms too,
and makes it consistent with the rest of the class.
Change-Id: I4a1b21de1815530e476fc5aa8a0d41c724fc8021
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: hjk <hjk121@nokiamail.com>
The code in 4696e9dbaa was incorrect. It is perfectly valid to call
these methods with row=-1 column=1 parent=some_index, this is exactly
what happens in QListView and QTableView. Child row/column is only for
trees.
Move the coordinate mapping from QSortFilterProxyModel into a new
mapDropCoordinatesToSource internal method, used by QAbstractProxyModel.
Task-number: QTBUG-39549
Change-Id: I3312210473d84b639cbe4c01f70ea36437db3e91
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Stephen Kelly <steveire@gmail.com>
Somehow, it doesn't shrink with btrfs, even if you write 1 MB of non-
null data. This does not seem to be a bug in QStorageInfo. strace
confirms that there is a second statvfs call happening.
Change-Id: I9ed99d27d25e191916278e6b8faeae132469fc63
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The testcase always returns the expected result, independently of the
QEventLoop::ExcludeSocketNotifiers flag to processEvents.
In Qt4 the same test uses an intermediate QEventLoop and already runs
it before the QEventLoop::ExcludeSocketNotifiers:
QEventLoop loop;
// allow the TCP/IP stack time to loopback the data,
// so our socket is ready to read
QTimer::singleShot(200, &loop, SLOT(quit()));
loop.exec(QEventLoop::ExcludeSocketNotifiers);
This fixes and improves the test by connecting, processing and
checking the bytesWritten signal for the pending connection socket.
Change-Id: I1b1d2b7b83910c87ba3fe48e29ac9fd585ac62ad
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch is cherry-picked from
c38f1f19b8 and
d29d727d72
Task-number: QTBUG-32435
Change-Id: I6dbbb668b96737a5791bc688949a00bc09f1357f
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
This patch is cherry-picked from
63ae74f365 and
07f234d2a8
Task-number: QTBUG-42528
Change-Id: I5f86679e62a4be48ce25afa5a4987a2b6678a357
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
The default should be the actual time of day. Showing the process's time
is the optional case. In the future, we'll provide a way to showing the
monotonic reference time ("boot") and we should improve the detection of
actual application runtime.
Change-Id: I41936d77ab9fad2073dc0ce1c97cabe57ec39f16
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
customMenuFont was null, so objects was an empty array, and
NSDictionary throws an exception when being called with arrays
of different sizes.
Task-number: QTBUG-42728
Change-Id: I8cdab449fd8c1d12b65c46dd5617a7f5e3e96c6e
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
QRegularExpressionValidator and QRegularExpression disagree on what a
partial match means.
[ChangeLog][QtGui][QRegularExpressionValidator] Allow empty string as
intermediate match
Change-Id: Ia6c55beb54870b1be5c88b6ef3eceebc8ca3f86b
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Whenever the source model of a QSortFilterProxyModel changes, and
the changes involve the sorted column, the implementation removes
the changed rows from the mapping, sorts them, and inserts them back;
in case of identical items, the rows are inserted at the end of the
block of equal rows.
The problem is that if the change doesn't actually happen on the roles
that are used for sorting, then we shuffle the rows, terribly confusing
the user. The typical case is a model with identical checkable rows:
(un)checking one row will move it at the end.
So, instead of trying to be smart with the removal/sort/insert sorted,
simply resort everything under the changed parent index. Since the
sorting used is stable, this keeps the items in the same positions.
Task-number: QTBUG-1548
Change-Id: Id0e61bd49da53b0a3e8aefa6b6893ac41179dc6f
Reviewed-by: David Faure <david.faure@kdab.com>
This would result in (a == b) != (b == a). The == operation should be
commutative as much as possible.
Now, there's still an asymmetry in that b is forced to a type and the
conversion may fail. QVariant should have an idea of what conversions
are "promotion" and which ones are "demotion" (subject to loss of data
and/or can fail), so it can do the promotion first
Task-number: QTBUG-42254
Change-Id: I9fa4496bbbf0f8719ff8456cc24247290beac608
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
This now guarantees that doing a round-trip from an FP number to string
and back to number results in the same number. This change is required
because DBL_DIG and FLT_DIG don't have the meaning that we were
expecting them to, here: they mean the minimum number of digits of
precision in decimal (i.e., changing the last decimal will always cause
the FP number to change). We need the maximum number: there is one
change in the last decimal place that causes the FP number to change.
IEEE 754 single-precision has 24 binary digits and double precision has
53 binary digits in their mantissa. To convert that to decimal, multiply
by the number of decimal digits a binary digit represents (log2(10) =
0.3), then add one for the rounding and one more digit for the actual
precision we want. That is, for floats we now ask for 9 digits and for
double, 17 decimal digits.
Task-number: QTBUG-42574
Change-Id: Ic78beb60a218f75322f832d33d63fd84e7a65b65
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Change-Id: I7147d326b0f5bb218f4dbc013ed82efb4c1e1440
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@theqtcompany.com>
Place the rubberband over the tabs instead of where the hidden
subwindows happen to be.
[ChangeLog][QtWidgets][QMdiArea] Fix rubberband position for tabbed mdi windows
Task-number: QTBUG-42612
Change-Id: I41e81ab8b99ab9e0fa533fd4ed1b2a8141d19753
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Convert a Windows-specific WebDAV specification
"//host@SSL/path" into URL's with scheme set to
"webdavs" and back to local file (Windows only).
Task-number: QTBUG-42346
Change-Id: I12663243848ea7b2d3f208743e837e9de14a93eb
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Prepare for determining the suitable number of touch points
from the device type. For now, 2 points are used as
before, which can be overridden by setting the environment
variable QT_PAN_TOUCHPOINTS. Add member variable
to QPanGesturePrivate which is set on gesture creation and later
used for comparison.
Task-number: QTBUG-40461
Change-Id: I6d9e35ca752375bc6a54435482ca0925195b8142
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
These synchronously delivered events allow applications to correctly
and conveniently handle native platform surfaces being destroyed. This
is particularly useful when doing rendering on a non-gui thread as it
allows to shutdown rendering before the native surface gets destroyed
from under us.
Task-number: QTBUG-42476
Task-number: QTBUG-42483
Change-Id: I63f41bbdb32f281d0f3b8ec2537eb2b0361f3bb3
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
This is required so we can take a QVariant and detect that it contains a
Q_GADGET and then use method like QMetaType::metaObject and QMetaProperty::write
with the QVariant::data
Change-Id: I3603692e4e84426e10bf59949e3def3ea4947bec
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
When font embedding is explicitly disabled, fall back to painter paths
as we would if the font prohibits embedding. Note that this flag was
never respected on any platform in any version of Qt, as far as I've
been able to tell, because the handling of it in the X11 print
engine was removed shortly after it was introduced in 2005.
[ChangeLog][Printing] Disabling font embedding is now possible using
the QPrinter::setFontEmbedding() function.
Task-number: QTBUG-41943
Change-Id: Ice5e893f9893c5243310ae7892bec7497dd55c4a
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
We're not ready.
[ChangeLog][EDITORIAL] Remove all mentions of QVersionNumber.
Change-Id: I03ad95992982eb3177f982c1eeddb6a6bc29336c
Reviewed-by: Keith Gardner <kreios4004@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
gcc 4.9 has the __has_include feature which enables the
TEST_FORWARD_LIST and includes the forward_list header. This in turn
checks that the c++11 flags are enabled, or throws an error.
Change-Id: I44aa58e47c2f9ba6f14cb5a68d24da4a76698e5f
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
We need to reset the active_engine belonging to QOpenGLContext whenever
we make the QtOpenGL paint engine active, to give the OpenGL paint
engine in QtGui a chance to sync its state if we've used the QtOpenGL
paint engine inbetween.
Change-Id: I445ce2f99bfbacf55650c881c4fdf07f2ff85069
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
When using QGLWidget in combination with QOpenGLFramebufferObject from
QtGui, instead of QGLFramebufferObject from QtOpenGL, the current_fbo
variable doesn't get updated when framebuffer object bindings change.
To ensure that the QGLWidget correctly releases the currently bound
framebuffer object when using a QPainter, we keep track of whether
QOpenGLFramebufferObject has modified the current FBO binding, and if
that's the case we need to read the OpenGL state directly instead of
relying on a cached value.
Change-Id: If7e0bd936e202cad07365b5ce641ee01d2251930
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
When tokenizing, after macro expansion, moc needs to concatenate
subsequent string literals, because parser do not check for such
expressions.
Change-Id: Icc4f01395a5a7b67368eb8341a45ee74ade7d7f5
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Fix warning:
QEventLoop: Cannot be used without QApplication
and occasional crashes on Windows.
Task-number: QTBUG-26406
Change-Id: Ia8b2a4e3d375d1e43f0e66fe64a39af5f9cf4d60
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Dario Freddi <dario.freddi@ispirata.com>
This is present in QList already and its lack is a nuisance when
switching from QList based code to QVector (which makes sense e.g.
if the item size exceeds sizeof(void*))
Also, albeit operator+=() and operator<<() exist, some people
simply prefer functions with real function names.
[ChangeLog][QtCore][QVector] Added QVector::append(const QVector &) overload
Change-Id: I9aae8223b086765625f2f3071fab5da0780f8a43
Reviewed-by: Liang Qi <liang.qi@theqtcompany.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
We map the Apple Clang versions to upstream, so that we have one
define to compare against.
Fixes build break on iOS due to qbasicatomic.h not defining
QT_BASIC_ATOMIC_HAS_CONSTRUCTORS on Apple Clang versions, which
is needed after 1e9db9f5e1
Change-Id: I17493c0187c20abc5d22e71944d62bfd16afbad2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When the QWidgetWindow receives a resize or move event, it should check
with the widget if its crect already has this geometry. if not then send
the resize or move event
Ideally events should be sent whenever the QWidgetWindow receives them.
QTBUG-42383 is created for this problem
Task-number: QTBUG-29937
Task-number: QTBUG-38768
Task-number: QTBUG-30744
Change-Id: I1e9a5d25de29a98885edece927ba14d7a763eb01
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
For some reason lost in time QFrame was missing that method. Of course
that led to duplicated code and to subtle sizing miscalculations.
Task-number: QTBUG-29330
Change-Id: I81163f5def6661e01cb2ecc49c1169449a3e3758
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This test shows a behavior change of setFrameStyle(QFrame::WinPanel)
between 4.4 and 4.5.
Turns out that 4.4 defaulted to "Raised" only via a side effect of the
code, while 4.5 defaults to "Plain" which makes more sense since Plain
is the default anyway. So there is no actual bug to fix (the app code
really meant QFrame::WinPanel|QFrame::Raised anyway), but the unittest
is still good to have for the future.
Done-with: David Faure
Change-Id: Icf16382504b18357256bc601b1e865abac9f2b2a
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Of the const overloads that return a QString or a QByteArray, this is
one that gains the most benefit. It happens often in constructs like:
QByteArray s = x.readLine().trimmed();
After this change, 41 out of 103 calls to trimmed become rvalue in Qt
and 272 out of 441 in Qt Creator. For simplified, the numbers are 27 out
of 69 in Qt and 10 out of 19 in Qt Creator.
Other candidates are left, right, and mid, but there are exactly zero
uses of left, right and mid on an xvalue QString or QByteArray in Qt.
I'm being lazy and using qstring_compat.cpp to store the QByteArray
compat methods.
Change-Id: I4e410fc1adc4c761bb07cc3d43b348a65befa9f6
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
For some reasons lost in history, those methods simply ignore
the list of items passed to them, and always return NULL.
Of course, that's totally broken. Fix that by doing the same thing
that the respective (hidden) models did when calling mimeData().
Surprisingly enough, QTreeWidget has a proper implementation.
Task-number: QTBUG-25900
Change-Id: I99ca7b4d4f87f096fd9ff0b0cb4e58282aa9c26e
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: David Faure <david.faure@kdab.com>
QMetaType::type(const char *) requires that the string argument is
0-terminated. This new overload makes it possible to query the type
of a string with an explicit length.
In particular, QByteArrays constructed by QByteArray::fromRawData(),
for example from a substring of a normalized method signature (the
"int" part of "mySlot(int"), can now be queried without making a copy
of the string.
Also, Qt5 meta-objects represent type names as QByteArray literals,
which can be fed directly to this new QMetaType::type() overload (no
need to call strlen).
Change-Id: I60d35aa6bdc0f77e0997f98b0e30e12fd3d5e100
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Several of the unit tests request that the peer emit more than one
signal, but only handle one. The rest of the signals stay queued in the
socket and will be delivered at the next test, causing it to fail often.
This doesn't happen in the tests with the bus. There, we don't receive
the extraneous signals due to AddMatch/ReceiveMatch on each signal
individually and the synchronous nature of the emission (the signals
have already been emitted by the next AddMatch and cannot match it).
Task-number: QTBUG-42145
Change-Id: I743a0553074972042fca46b76db5d9e7b3209620
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Methods can be invoked with QMetaMethod::invokeOnGadget
Change-Id: Id734868bb530b02587daf0f62bce01798ade2ac2
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Adds automatic conversion from QVariants with a QVariantHash to
QJsonValue and explicit methods for conversion between QVariantHash
and QJsonObject.
[ChangeLog][QtCore][QJsonObject] Added conversion to and from QVariantHash
Change-Id: I140ef881463acabaab2648e28209487d8ad18e0d
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Instead of sending the event from random places, send it from
QWindowSystemInterface. This allows to send override events on OS X to
menus before doing other key processing and reduces the number of
ShortcutOverride events on all platforms to exactly one per key press
event.
Additional test by Friedemann Kleint.
Task-number: QTBUG-38986
Change-Id: I6981bb776aba586ebc7c3daa5fd7a0d84c25bc3e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
If we detect a utf8 BOM mark at the beginning of the .ini
file, skip the marker and set the iniCodec to utf8.
Task-number: QTBUG-23381
Change-Id: I1b37fc4f1638a48e4f3ee71ab165e2989bc592f1
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
We do not need to emit a diagnostic at definition time.
The diagnostic will be emit at expansion time.
Fix error when parsing boost header:
/usr/include/boost/fusion/container/vector/vector.hpp:25: Error: '#' is not followed by a macro parameter
Task-number: QTBUG-42233
Change-Id: I27deab362341f17ca3b0160615bb1b0934c3d5c3
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
OS X now has a setting (General->Show scroll bars) to use only transient scroll bars.
Task-number: QTBUG-41340
Change-Id: Iffe30e9d601c169d955a380002743bab518f41ea
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
ICU would return a utf-16 (endian dependent) codec for unicode
which is very rarely what people want. In most cases, unicode is
encoded in utf8 these days, so return a utf8 codec for it.
Task-number: QTBUG-41998
Change-Id: I51ee758d520702b263a8b2011787eb1f3455ed96
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Adds special shaders for the Alpha8 and Grayscale8 formats so that
they do not need to rely on the support of GL_ALPHA and GL_LUMINANCE
that has been removed from core in recent OpenGL versions.
Change-Id: Ie370379b458abf2a50e252bc5099aefc1b11fb1d
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Do not automatically add a \n to all messages formatted by
qFormatLogMessage. Some backends require a final newline,
some don't, so it's best to only append it where it's actually needed.
The returned string will be null if the pattern is empty. This allows
to differentiate between the case that the pattern just didn't apply
(empty line is printed), and the case that qSetMessagePattern(QString())
have been called (nothing is printed).
Change-Id: I17fde997a4074f58f82de6dea129948155c322d6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
This extends the test suite introduced in 497f0af1f7 for
a known-to-be-good case.
Change-Id: Ib574ecfdb8e9d91985d6df8c092896581d1d06ff
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
The previously produced code was valid C++. Add the declaration
nevertheless to help people who want to use the switch in their
own code.
Task-number: QTBUG-42119
Change-Id: Ia47cf3930684474ff65e5cf37335d7d7f57a1d31
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QLineEdit commits and hides QInputMethod on enter key press. When
Qt::ImhMultiLine input method hint is set, virtual keyboard is not
hidden.
Task-number: QTBUG-37850
Change-Id: I018351caa18bd2116665771e5f024a57182a01b9
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Replace "Apple Roman" by "Macintosh" which is registered by IANA:
http://tools.ietf.org/html/rfc1345.
Replace unsupported "GB18030-0" by "GB18030".
Remove "JIS X 0201" and "JIS X 0208" as they are supported as parts of
other Japanese encodings but not directly.
Add "HP-ROMAN8" which is supported by both Qt and ICU.
Also clean the codecs test.
Change-Id: Iaf8e8ff1900d3f92ea0e0df75c60fe1534de23ac
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Substitute this encoding by "macintosh" when Qt is built with ICU.
It is for compatibility with Qt 4.x.
Change-Id: I70c51cba7d473ac81e25862736cb71a2f6894055
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Removing and adding toplevel items could result in invalid stacking
order (not corresponding to insertion order).
Task-number: QTBUG-19316
Change-Id: Ia8646784a2181cfa936b101e2adaf7e7e73bb83d
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Selection rectangle was incorrectly mapped to scene space when the
view was rotated. It became a rotated rectangle instead of the correct
polygon (rhombus).
Task-number: QTBUG-42008
Change-Id: Ib7b366bec7e1f83109e03c434268ad6897138f30
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Add support to get/set the DuplexMode on Windows and Mac, improve the
CUPS duplex handling, ensure support is the same on all platforms.
[ChangeLog][QtPrintSupport][QPrinter] Added duplex support for Windows
and OS X.
Task-number: QTBUG-11332
Change-Id: I9d61d63233d828c3b1fd6df54072c6049f3c6298
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The sample lineedit in Qt's own font dialog shouldn't have its font
affected by stylesheets.
Not only does this hampers the ability to preview the font, it actually
overrides the font selection as that one is taken directly from the
widget.
Task-number: QTBUG-41513
Change-Id: I11d0bef8c7bf7bdae4cc08b6b9276d0fc14a75fb
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
After the poodle vulnerability SSLv3 should like SSLv2 no longer be
considered safe, so when a user request a safe protocol we should
only allow TLS versions.
[ChangeLog][QtNetwork][QSsl] QSsl::SecureProtocols now also excludes SSLv3
Change-Id: If825f6beb599294b028d706903b39db6b20be519
Reviewed-by: Richard J. Moore <rich@kde.org>
The updateDelegate() function checks isEditable() which in
turn checks if d->lineEdit != 0, so we need to make the
call after the lineEdit has actually been set/unset, otherwise
the change to the delegate will not come until the next time
you update the delegate.
[ChangeLog][QComboBox] Fixed updating appearance of popup menu
when changing the editable state of the combo box.
Change-Id: Ib32f36cabd53c2c30d6256484a1eae131419960a
Task-number: QTBUG-33537
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Make sure the dock widgets get the available space when the
central widget cannot expand any more.
[ChangeLog][QtWidgets][QMainWindow] Dock widgets will now be resized
properly when the central widget has a fixed size.
Task-number: QTBUG-40410
Change-Id: Id06c07b79aa3102aa41212fa2c621f5fa426fe02
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
This upstreams parts of Qt Creator's tst_offset test to serve as
an early warning system by testing private implementation details
that are used in Qt Creator's data structure "pretty printing"
facility.
While the tested implementation details can be changed without
breaking binary or source compatibility, downstream tools like
Qt Creator depend on them.
If this test breaks, you are kindly asked to coordinate with the
downstream stakeholders to avoid tool breakage.
Change-Id: I1286efcec9bef105f80c2163a4f66f5c43f3a218
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Since layout items can now be hidden, this also makes sure we respect
the QSizePolicy::retainSizeWhenHidden
Task-number: QTBUG-20132
Change-Id: Iab59fc9b61d4ca1bb2208c479a027da6eb0283a9
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Map the positions via QGraphicsScene and the first QGraphicsView
(as is done in existing code). Fall back to the previous code
path when no QGraphicsView exists, which is hit in the tests.
Change-Id: I0754765d05cded6bc1b64045f2513fef8afde337
Task-number: QTBUG-41135
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
At 4GiB the CI test system still spends a considerable
amount of time testing this. Tune the size down to
16 MiB.
Change-Id: I417aa6829fcc734e5de4d7d34e503190f6b291e5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
QNetworkDiskCache don't handle to set CookieHeader. so All Set-Cookie's value is invalid.
The root of cause is that metaDataChanged() don't work because of no slot for it.
Add the slot for it and renamed to _q_metaDataChanged.
Task-number: QTBUG-41514
Change-Id: I5cec017e59a1de69c6e89c0bc7209a73dcdc11da
Reviewed-by: Jeongmin Kim <jm86.kim@lge.com>
Reviewed-by: Jung Dong-Heon <clamp03@gmail.com>
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Without this part of the calendar widget get cut off when put
in a layout and the contentsMargins are non zero.
Task-number: QTBUG-40352
Change-Id: I9ce90476c59c270d92e876a5dc81ea8ce325848c
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
QListView::spacing() is the space around the item (layout margin),
so the effective spacing is twice as big.
This differs conceptionally from QTableView, which has a spacing of 1
and a line on top/bottom. Split up QComboBoxPrivateContainer::spacing()
into functions return spacing and top/bottom margins to reflect this.
Task-number: QTBUG-37865
Change-Id: I1ff812e7856e00a53f1119ef3304956cbb7cbfca
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Fix warning:
void QWindow::setTransientParent(QWindow*) ... must be a top level window.
which occurred for example when parenting a QMenu onto a native child
widget.
Task-number: QTBUG-41898
Change-Id: Icc25fb2108bd68b2d9c0e551949b90fc7a82d358
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Change-Id: I823566ba72668c611d225aa92c4d09a53cabe8fc
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Benign, but easy to avoid by using automatic storage.
Change-Id: I60a1a2e85d8c1b2d91f3f33973374afae8876340
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Benign, but easy to avoid by allocating objects on the stack.
Change-Id: I1933d0abb2ebd53bcf0402f392e7e3c201756b9e
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Benign, but easy to avoid by using the same pattern as in clear().
Change-Id: Ie382313343385f0709519b232a7d58dd8181b8de
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Benign, but easy to avoid by using automatic storage.
Change-Id: I4eefce9a7c902ceadebdd0aba1bbba7e5519cf24
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Benign, but easy to avoid by distinguishing between
owning and non-owning smart pointers.
Change-Id: Idcd7ae550a8e4e00dfcd5570790e2ed985e2379a
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Makes the test execute faster (not that it's slow in any way)
and more importantly gets rid of the QGuiApplication-induced
3rd-party library leaks reported by asan and/or valgrind.
Change-Id: I94b505f15b4db577a2807b0b81464e19ce7e7cab
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
qsslsocket_winrt.cpp defined it locally, which runs the risk of
clashes with a potential user-defined qHash(QSslError), so
make it public.
Also included both .error() and .certificate() in the hash, as
both of these are used to determine equality (the WinRT version
only used .error()).
[ChangeLog][QtNetwork][QSslError] Can now be used in QSet/QHash.
Change-Id: Ieb7995bed491ff011d4be9dad544248b56fd4f73
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
qsslsocket_winrt.cpp defined it locally, which runs the risk of
clashes with a potential user-defined qHash(QSslCertificate), so
make it public.
Also, the implementation in qsslsocket_winrt.cpp simply hashed
the handle(), which violates the principle that equal instances
must hash to the same value. Also, for some platforms, the
implementation returns nullptr unconditionally, which, while not
violating the above-mentioned principle, will make all users of
the hash have worst-case complexity.
To calculate a meaningful hash, therefore, the certificate needs
to be inspected deeper than just the handle.
For OpenSSL, we use X509::sha1_hash, which also X509_cmp uses
internally to determine inequality (it checks more stuff, but
if X059::sha1_hash is different, X509_cmp() returns non-zero,
which is sufficient for the purposes of qHash()). sha1_hash may
not be up-to-date, though, so we call X509_cmp to make it valid.
Ugh.
For WinRT/Qt, we use the DER encoding, as that is the native
storage format used in QSslCertificate. This is not equivalent
to the implementation used in qsslsocket_winrt.cpp before, but
since handle() == handle() => toDer() == toDer(), it should not
be a problem.
[ChangeLog][QtNetwork][QSslCertificate] Can now be used as a key in QSet/QHash.
Change-Id: I10858fe648c70fc9535af6913dd3b7f3b2cf0eba
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
ASAN report:
READ of size 8 at 0x606000011990 thread T0
#0 0x505e3b in EnterTestMainDialog::eventFilter(QObject*, QEvent*) tests/auto/widgets/kernel/qwidget/tst_qwidget.cpp:10294
[...]
0x606000011990 is located 48 bytes inside of 56-byte region [0x606000011960,0x606000011998)
freed by thread T0 here:
#0 0x2b8df3551c79 in operator delete(void*) ../../../../gcc/libsanitizer/asan/asan_new_delete.cc:92
#1 0x418ab5 in EnterTestMainDialog::buttonPressed() tests/auto/widgets/kernel/qwidget/tst_qwidget.cpp:10276
previously allocated by thread T0 here:
#0 0x2b8df3551739 in operator new(unsigned long) ../../../../gcc/libsanitizer/asan/asan_new_delete.cc:60
#1 0x4188cf in EnterTestMainDialog::buttonPressed() tests/auto/widgets/kernel/qwidget/tst_qwidget.cpp:10272
EnterTestMainDialog::eventFilter() checks for nullness of 'modal'
before accessing it, but buttonPressed() did not reset 'modal'
to nullptr after deletion.
Change-Id: I65562a29f8264a6996d7d615e06de1d1afb5af53
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
[ChangeLog][Important behavior changes][QSettings]
QSettings::value() now returns an invalid QVariant
when passing an empty key. The code path ran into
an assert, which was only noticeable in debug
builds.
Task-number: QTBUG-41812
Change-Id: I5cc32be3aa267a132e9d6639ecd6cb0bbafc15b0
Reviewed-by: Stéphane Fabry, Cutesoft <stephane.fabry@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The implementation was inconsistent with QString::right(),
and did not return the N rightmost characters but actually did
the same as QString::mid(N) (returning the rightmost size - N
characters.)
Since this function is fairly recent (Qt 5.2), is documented to
behave the same as QString::right(), and since these APIs are
meant to be interchangeable, this needs to be fixed, even though
it changes behavior.
[ChangeLog][Important Behavior Changes] Changed QStringRef::right()
to be consistent with QString::right(). The function now returns
the N right-most characters, like the documentation already claimed.
Change-Id: I2d1cd6d958dfa9354aa09f16bd27b1ed209c2d11
Task-number: QTBUG-41858
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
The check for Qt::Key_A to handle selectAll was changed to directly
compare to QKeySequence::SelectAll as this will only match Ctrl. The
former implementation also triggered when e.g. Shift was pressed.
Added a check that selectAll is only called when selection is not
disabled, i.e. selectionMode=NoSelection.
Added a unit test for selectAll().
Task-number: QTBUG-26687
Change-Id: I721e7ab590b55d7d754b3b74ef01756fa5aa1315
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The setMimeData() function is documented to take ownership of
the object passed in, but in the case where the platform
plugin did not support the requested mode, we would simply
return without deleting the object nor telling the application,
so it would cause a potential memory leak. We need to honor the
contract, even when we fail to set the mime data.
Test was updated to avoid verifying the leak in cases where
the platform does not support all modes.
[ChangeLog][QtGui][Clipboard] Fixed a memory leak in setMimeData()
when the platform plugin did not support the requested mode.
Task-number: QTBUG-41852
Change-Id: I2112da1613199fe1b56724e7ccf097b9e912c117
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Q_COMPILER_DEFAULT_MEMBERS and Q_COMPILER_DELETE_MEMBERS are now set
starting from gcc 4.6. Pre-4.6 compilers implement a non-final snapshot
of N2346, hence default and delete functions are supported only if they
are public. Starting from 4.6, GCC handles final version - the access
modifier is not relevant. Compiler error:
qsharedpointer_impl.h:717:31: error:
'QEnableSharedFromThis<T>::QEnableSharedFromThis()' declared with non-public access cannot be defaulted in the class body
Change-Id: If1d3d4696f91912a09ca72bd4aa1fb07f491a0cb
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... so that a user can have more fine-grained uploadProgress signal
emissions if desired.
Change-Id: I9f77fd80c100dbe249beaf3057e6e8974680ec59
Reviewed-by: Markus Goetz <markus@woboq.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
- Ensure top level widgets are cleaned up.
- Place wizards beside each other for comparison.
- Use classic style on Windows to avoid interference by Vista style.
Change-Id: I223a40ea14eefe65dc2e9e8ddee44b0f0c806e3d
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Apparently, this causes problems with the completer due
to the fact that it matches the root drive "C:\" on Windows.
Task-number: QTBUG-41681
Change-Id: Iaf96675067e22e679371139a1a2fbf011a5edbdc
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
- Streamline code and remove code that has no effect.
- Create temporary directory and files only when it is actually
required (empty start path).
- Remove try/catch as it is not commonly used in Qt autotests.
Its original purpose was apparently to ensure temporary file
cleanup, but that should now work since smart pointers are used
for temporary files and directories.
- Introduce variable for case sensitivity.
Task-number: QTBUG-41681
Change-Id: Ie5f621c30fc461b880292b853e0660b8fba316eb
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Tracking the file, line, function means the information has to be stored
in the binaries, enlarging the size. It also might be a surprise to some
commercial customers that their internal file & function names are
'leaked'. Therefore we enable it for debug builds only.
[ChangeLog][QtCore][Logging] File, line, function information are not
recorded anymore for logging statements in release builds. Set
QT_MESSAGELOGCONTEXT explicitly to enable recording in all configurations.
Change-Id: I454bdb42bcf5b5a8de6507f29f2a61109dca9b91
Reviewed-by: Fawzi Mohamed <fawzi.mohamed@digia.com>
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
Even when we do not intend to display the text, we still need to go
through the processing of mnemonics to remove them from the text.
Instead of capping the max underlines to 0, the TextDontPrint option now
just saves adding the underline formats.
Task-number: QTBUG-41593
Change-Id: I67790650dbed0092de2c63e5d5a9349dc02d5846
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Robert Loehning <robert.loehning@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Take PM_FocusFrameVMargin into account.
Task-number: QTBUG-35146
Change-Id: I1499790537ddf9fbb912ab764b7d049ee11af95d
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Say you have a document of two blocks of text.
When you select a block of text in the document and then replace this
with a new empty block (by pressing enter) and then subsequently
undo this action, the following three steps are performed as a
chain of undo commands:
1. Remove the empty block at the beginning of the document
2. Insert a new empty block at the beginning of the document
3. Insert the text back into the first block
Since a block is removed and inserted in the same go, both blocks
require a relayout, since the accumulated change spans both blocks.
However, in QPlainTextDocumentLayout we would only look at the max
of either removed chars or added chars. This would match the text
length of the first block at this point, so we would only relayout
that block. However, since we are also removing characters, the
actual accumulated change to the document is larger. We should
relayout any block touched by the sum of the added and removed
character counts.
Missing this, the paint event would later query
block.layout()->lineForTextPosition(0) which would give an invalid
line despite the fact that the block.length() > 0. This caused
a crash in the paint event when the full width selection was
turned on.
Note that the logic here was only recently updated to include the
removed characters at all in the logic, by the SHA1:
2983cb9531.
[ChangeLog][QPlainTextEdit] Fixed a crash when using full width
selections and issuing a complex undo command chain which removes
and inserts an empty block in one go.
Task-number: QTBUG-36415
Change-Id: Iafe8a69e455e0c713a48714f10f0cace69c84f51
Reviewed-by: Axel Rasmussen <axel.rasmussen1@gmail.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
IPv6 addresses can start with ":", for which QDir::isAbsolute() would
always return true (QResourceFileEngine::isRelativePath() returns
constant false) and would trip the calculation for local files.
Similarly, IPv6 addresses can start with strings that look like Windows
drives: "a:", "b:", "c:", "d:", "e:" and "f:" (though not today, as
those address blocks are unassigned). Since a valid IPv6 address will
definitely require at least one more colon and Windows file names cannot
contain ':', there's no ambiguity: a valid IPv6 address is never a valid
file on Windows.
This resolves the ambiguity in favor of IPv6 for Unix filenames (which
can contain a colon) and in case of an URL containing scheme, relative
path and no authority ("dead:beef::" for example could have been parsed
as scheme() == "dead" and path() == "beef::").
Task-number: QTBUG-41089
Change-Id: Id9119af1acf8a75a786519af3b48b4ca3dbf3719
Reviewed-by: David Faure <david.faure@kdab.com>
They're gone since Qt 5.0 and only exist as typedefs for QStyleOptionFrame.
Change-Id: Icff45cbd3a47db8618a7f7a80f7252651969237c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
My previous fix for CPU load issues between HTTP thread
and user thread was fragile if the upload QIODevice
emitted readyRead() multiple times.
[ChangeLog][QtNetwork][QNetworkAccessManager] Fix behavior of upload QIODevice
that generate data on readyRead() for HTTP PUT/POST
Change-Id: Idb1c2d5a382a704d8cc08fe03c55c883bfc95aa7
Reviewed-by: Christian Kamm <kamm@incasoftware.de>
Reviewed-by: Richard J. Moore <rich@kde.org>
There were several use cases that did not work with the old
implementation and it was not really readable.
Task-number: QTBUG-3472
Task-number: QTBUG-40067
Task-number: QTBUG-23892
Change-Id: I1e038792dc54cdc6f8d9bb59d80b11dd3c56fac6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The moc preprocessor is not necessarily fully compatible with the native
compiler preprocessor, which can lead to annoying warnings.
This fixes a problem particularly with the boost headers that rely on
MSVC only preprocessor features (to work around other MSVC preprocessor
deficiencies).
Task-number: QTBUG-29331
Change-Id: If884452969b512a746c81e235d31636b39c45b27
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Fixes a regression against Qt 4, where Show/Hide events were received
when the minimized state changed.
It is restricted to QWidget so as not to introduce additional events
to QWindow (which already has signal visibilityChanged()) and cause
unexpected side effects in QQuickWindow.
Task-number: QTBUG-41312
Change-Id: Ib165a5daf7a7e5d8231ef8a94b70e8a2a3253057
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
dbmsType was previously kept as a private variable in QSqlDriverPrivate,
however it's particularly useful for QODBC users.
[ChangeLog][QtSql][QSqlDriver] Add support for determining DBMS type from SQL driver.
Change-Id: If1c221520da9ac4ccef85a02db078679d76eac92
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
The result of qstrtoull() was unconditionally truncated to an int,
resulting in wrong values being appended to the segments vector
when the numerical segment value was above INT_MAX.
Prevent this by first checking the return value of qstrtoull
as a qulonglong for values larger than INT_MAX and stopping
processing in that case. That means that segments that
numerically overflow an int are now considered part of the
suffix.
Also added tests for the case where a segment value is larger
than ULLONG_MAX. That was already working correctly.
Change-Id: Ia4b89021dcfe6bfae27c8d89bb678ec5e0e3b847
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
I think supporting them now is too complex for the Qt code. We would
probably need to rewrite the parser using a tokenizer so we can find the
right name of the function. Just skipping backwards breaks the support
for returning function pointers and PMFs.
Change-Id: I78636437ecd46d77e6b9b013b2f2668cca1b6cd6
Reviewed-by: David Faure <david.faure@kdab.com>
tst_qtjson.cpp(2711) : warning C4566: character represented by universal-character-name '\u2090' cannot be represented in the current code page (1252)
tst_qtjson.cpp(2712) : warning C4566: character represented by universal-character-name '\u2090' cannot be represented in the current code page (1252)
tst_qtjson.cpp(2713) : warning C4566: character represented by universal-character-name '\u2090' cannot be represented in the current code page (1252)
Task-number: QTBUG-41100
Change-Id: I193dc48236bdd3857657a5684178630f0e1dab6d
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Remove an useless check which spontaneously allow direct reads from the
socket engine.
Change-Id: Ia3d2a572d6f1563d613fe2f00d0d6849df259827
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
tst_qcolumnview fails on OS X # QTBUG-41341
tst_qaccessibility fails on OS X # QTBUG-41340
tst_qnetworkreply fails on OS X # QTBUG-41320
tst_qfontcombobox fails on OS X # QTBUG-41318
tst_macplist fails on OS X # QTBUG-41314
tst_qgraphicsitem fails on OS X # QTBUG-41342
tst_qmdiarea fails on OS X # QTBUG-41343
tst_qtableview fails on OS X # QTBUG-41344
Change-Id: I2626aa61417336805872a807c4a6065b7e0ddb02
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Do not zoom 1pt on every single wheel-event, but instead scale
the zoom with the size of the angle delta.
Change-Id: Idbe17356c7845ebd0039f655d3e611e71c6f0dd6
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Only step the value in the spin box when we have accumulated one wheel
tick worth of wheel delta.
Also fixes the obsolete contructors of QWheelEvent so they set the non
obsolete properties.
Change-Id: Ic6ea4b37afa8eec85a6ca7bdc0d919bf8fb02608
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
This was done wrong when using the ini format.
Task-number: QTBUG-22461
Change-Id: Ib9390460bce6138659cceac7e3cd25339ba5e9bb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
device is private, always null and class has no friends, so no need to have it at all
Change-Id: I320d47f1a712a3202c08b494563533e29d185501
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
We need to have a finer grained control over the tests
we skip in our CI system. This adds a blacklisting
mechanism that allows blacklisting individual test
functions (or even test data) using a set of predefined
matching keys for the operating system and some other
relevant variables.
QTestlib will search for a file called BLACKLIST in the test
directory and parse it if found. The file contains a simple
ini style list of functions to blacklist. For details see
qtestblacklist.cpp.
Change-Id: Id3fae4b264ca99970cbf9f45bfb85fa75c1fd823
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
In the list of default implementations, the raster ops added in
ae0ddb8c72 were all offset by one
composition mode because of a duplicate entry in the array. The
effect would be, e.g. that using the NotDestination operator would
resolve to the Set operator instead.
Most users will probably not have experienced this since any of
the asm-based functions will be preferred.
[ChangeLog][Painting] Fixed some very rare cases of mismatched
raster modes in QPainter.
Change-Id: Ia242b54c78acbe1c89d9b4ecd10936564ec134b2
Task-number: QTBUG-41413
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
When a window's screen changes it may recreate the platform window.
In that case, update the winId in the widget to keep it in sync.
Task-number: QTBUG-40681
Change-Id: Iec815320214832bb63952de3a5bd1340a04dacd4
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
With VS2013 Update 3, Win32 sockets are now allowed in Windows Store
Apps. Upgrading VS meant that gethostname was visible to the application,
but failed to link as the mkspec doesn't link to ws2_32. Adjust the
workaround not to call the newly visible symbol on WinRT.
Change-Id: Ide6d8759cca7acab6c466a9bf4d6b876f6ca7605
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Each test function is responsible for removing the children it added to
m_window, since m_window is reused for each testcase.
Due to this, the test
QCOMPARE(children.length(), 2);
failed, (it was 3).
Change-Id: Idbd13214d2e841450800df0542fbdbcfaac85ce1
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Extend the QImage format with two 8-bit grayscale and alpha formats.
These formats have the advantage over Indexed8 that they have simpler
conversion and can be rendered to by the raster engine.
[ChangeLog][QtGui][QImage] Added support grayscale and alpha 8-bit
formats which can also be rendered to.
Change-Id: I4343c80a92a3dda196aa38d0c3ea251b094fc274
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
QToolButton::sizeHint() takes into account the presence of a menu.
However, setMenu() doesn't retrigger a size hint recalculation. Hence,
(un)setting a menu on an already sized tool button won't properly
reset the size hint. Since the calculated size hint is cached,
delete the cached value and call updateGeometry to cause a
recalculation.
Task-number: QTBUG-38949
Change-Id: I6e79e5e70e31afdfd129282b3668875eca86f51d
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
QSplitter::handleWidth() returns either a style dependent value if
d->handleWidth is negative or the value of d->handleWidth itself.
So to preserve this choice after calling saveState()/restoreState()
we should save and restore the value of d->handleWidth rather than a
result of handleWidth() which is non-negative.
Change-Id: Idc11f8063d34b6c4a5f9b0a0032868679766dfb9
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
And not a normal pointer. The problem is that in certain scenarios,
if the TLW containing a QSizeGrip changes and the old TLW gets
immediately destroyed, then the mechanism which updates the tracked
TLW is run too late, and ends up accessing a dangling pointer.
Therefore, we need to protect that pointer via a smart pointer.
Task-number: QTBUG-22867
Change-Id: Icfb051132bacde604f660ac7a98bc0a9d1022c68
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Add a new PM_TreeViewIndentaion enum value to QStyle and get
the corresponding pixel metric in QTreeView.
[ChangeLog][QtWidgets][QTreeView] Indentation is now style-dependent by default.
[ChangeLog][QtWidgets][QTreeView] Added resetIndentation().
Change-Id: Ifad7987b8f3c6cd32987b89d95390f33043d8f19
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Adam Majer <adamm@zombino.com>
Currently QTextDocuement only provides find using QRegExp. This patch
aims to add support for QRegularExpression.
[ChangeLog][QtGui][QTextDocument] Support for searching with a
QRegularExpression in a document has been added.
Change-Id: I6dba10545b83995d093407038a821fe54db3d261
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Heuristic with last-modified time in Qt has some problems.
1) Remove redundant expirationDate.isInvalid() check
expirationDate.isInvalid is already checked. So I removed.
2) Add dateHeader.isInvalid() check
The dateHeader is used in expiration calculation.
I add invalid check for the dateHeader.
*. The dateHeader is the origin server's Date
3) Change diff time calculation.
The expirationDate is calculated with time diff.
Previous calculation is
// The lastModified is earlier than the currentDateTime.
// The diff has negative value.
int diff = currentDateTime.secsTo(lastModified);
// The expirationDate is earlier than lastModified
// , currentDateTime and dateHeader.
expirationDate = lastModified.addSecs(diff / 10);
*. currentDateTime: current time
*. lastModified: last modified date in server
It means that files are not cached with the heuristic.
I changed diff calculation.
int diff = lastModified.secsTo(dateHeader);
freshness_lifetime = diff / 10; // RFC 2616 13.2.4
4) httpRequest.headerField setting
If current_age is larger than 1 day, the cache MUST attach Warning 113.
*. The current_age is value of age in header
or elapsed time from dateHeader in Qt source code.
Previous code does not check current_age is larger than 1 day correctly.
// dt = 1970-01-01T00:00:00 + current_age
dt.setTime_t(current_age);
// currentDateTime is much bigger than 1970-01-01T00:00:00
if (dt.daysTo(currentDateTime) > 1)
Task-number: QTBUG-40836
Change-Id: I4b00c3b287e6fafeea6b02681533fe75a198247e
Reviewed-by: Jung Dong-Heon <dongheon.jung@lge.com>
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
A lot of code in Qt uses VAR=1 for enabling or disabling some feature
or other, ignoring qEnvironmentVariableIsSet(), which was added for
that purpose. Other code actually reads numerical values from
environment variables. For both use-cases, provide a non-throwing,
non-memory-allocating way to get the numerical (int) value of an
environment variable, complementing qEnvironmentVariableIs{Set,Empty}().
[ChangeLog][QtCore] Added qEnvironmentVariableIntValue().
Change-Id: I81c85287ea10d355c1bbf8d7807ec9a0e477bce0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
So far we've only tested matching against QStringRefs which were
spanning the entire underlying QString. Instead, use the offset
matching to also perform tests using "proper" substrings.
Change-Id: Ia66e23f738b52997311ed2cf869e595079984292
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This is useful when writing a generic preview-icon-generator which
should work with different type of views, itemviews and QML views.
A way to be notified of a change of icon size was missing on the itemview side.
[ChangeLog][QtWidgets][QAbstractItemView] Added iconSizeChanged signal.
Change-Id: I19b3049961002ca27d71aefbb6980d1e6f225c79
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
If the types doesn't match in QVariant::compare we do a comparison based
on QString, this may end up indicating a full match, though the we don't
match according to cmp. In this case it would be better if we preserved
the non-matching to avoid breaking ordering.
[ChangeLog][QtCore][QVariant] Fixed ordered comparison between QVariants
that do not match but produce identical toString output.
Task-number: QTBUG-40363
Change-Id: I84a8eca11e8875dba9948bde2906ae7c5aa35704
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
This reverts commit 20cf632ad5. The commit
produced to many problems during statics destruction. For example
causing QtCreator crash (QTBUG-40987).
Change-Id: Ib52f6a449c2d84deab2de792559a6a065ca45e8d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
A "sharing violation" happens when trying to delete the lock file and another
thread/process is reading it at that very moment. Detect the error and try again,
up to 10000 times - to avoid an infinite loop if QFile::remove fails for another
reason such as a sudden change of permissions preventing us from deleting our
own lock file.
On Unix the deletion can't fail because of readers, but it doesn't hurt
to check the return value there too, to catch other reasons for failures
such as a sudden permission change.
Task-number: QTBUG-38853
Change-Id: Icf12a74faed4a4916e3427abc09d9c33aa141476
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Refactor the code and move more things into the cross platform
code path.
Make sure the flags survive changing the locale of QCollator.
Use the correct locale on Windows, WinRT and OS X. We now
pass all QCollator autotests on these platforms.
Task-number: QTBUG-40778
Change-Id: Ic2d3334b5018c323a35a3ea8fc1d7ab5f99b4e62
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The old code was completely broken. It did dereference
val for user types, but val does in this case only contain
garbage. Instead use the pointer to the correct data.
Change-Id: I20ccf0bfa3dd3774c787d08c51cc8dd7b1ec9a1a
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
A well formed JSON document is not allowed to contain
trailing garbage at the end. Don't accept this in the
parser.
Task-number: QTBUG-40062
Change-Id: I0a09dbd099a8c643f58023342546c4e67d026fec
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
The comparison operators between QJsonPrivate::String
and QJsonPrivate::Latin1String weren't all correct, leading
to wrong sorting of keys in QJsonObjects when the keys were
outside of the latin1 range and resulting lookup errors.
Task-number: QTBUG-41100
Change-Id: Idceff615f85d7ab874ad2a8e4a6c1ce8c2aa0f65
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
In some cases, e.g. when bad credentials are provided in an ftp URI,
QNetworkAccessAuthenticationManager::cacheCredentials is called with a
null authenticator. This authenticator should not be cached, because
it is useless, and leads to inconsistencies in the use of the cache
Task-number: QTBUG-40622
Change-Id: If2a0a422b915f268648f5eef1d68601446123371
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
This makes non-OpenSSL backends able to handle to certificate
extensions.
This also converts the Q_OS_WINRT #ifdef's in the unit test to
QT_NO_OPENSSL as the behavior is the same for any non-OpenSSL
backend.
Change-Id: I6a8306dc5c97a659ec96063d5a59cee2ee9a63a9
Reviewed-by: Richard J. Moore <rich@kde.org>
Currently the peerVerifyError test for QSslSocket makes an assumption
about the order in which SSL errors are emitted by peerVerifyError. This
assumption does not necessarily hold for non-OpenSSL backends.
This change fixes this assumption, and also checks that HostNameMismatch
was found both in the errors emitted by peerVerifyError and by sslErrors.
Change-Id: I856d1ea43b36332db0f178d35fc14a4bb18ad673
Reviewed-by: Richard J. Moore <rich@kde.org>
Some of the QSslSocket tests use OpenSSL-specific symbols. This
change fixes this issue.
Change-Id: Ib67efa42a15facaf0ad34fc0466341a37d945d1e
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Widgets and layouts added or inserted to a layout are checked for:
- Not being NULL
- Not being the parent widget of a layout or the layout itself,
respectively
Without this commit, adding a widget to its own layout would result in a
CPU-hogging infinite loop. Now, a warning is written to stderr and the
add or insert function call is ignored.
The checks are implemented as public functions of QLayoutPrivate and
thus accessible in QLayout's descendants to be used in various
"addWidget", "insertWidget", etc functions.
Unlike 'classical' layouts like QGridLayout, QFormLayout does indeed
accept widgets that are NULL. To not break this behavior, any call for
the check functions first tests if the widget or layout, respectively,
to test is NULL or not and calls the check only in the latter case.
Automated tests for QBoxLayout, QGridLayout, and QFormLayout were added.
For an unpatched Qt 5.3, each of those automated tests will freeze as
explained in QTBUG-40609. For a fixed version, warning messages about
invalid parameters to addWidget/addLayout/... calls will be read by
QTest::ignoreMessage, resulting in a passed test.
Change-Id: I1522d5727e643da3f7c025755975aca9f482676d
Task-number: QTBUG-40609
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Both Q_LITTLE_ENDIAN and Q_BIG_ENDIAN macros are always defined
on all architectures. So, byte order detection results in
"little_endian" value for big endian systems. Test the system
endianness in a right way, according to Q_BYTE_ORDER macro
documentation.
Change-Id: I5523f90567e78d679a3ff2902a8f5377ed39ceb1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These functions are supposed to make it easy for third parties (and
QLineEdit) to implement the textAt/Before/AfterOffset functions.
Before the functions were ignoring newlines completely and thus only somewhat
useful.
Change-Id: I7136b9502a7fa6f8ad9ad7236761a34c1a7fd4da
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
This adds support for reading and writing ASN.1 boolean
values. It also adds an operator to test two ASN.1 elements
for equality.
Change-Id: I4a22cbf9808533d593fc59d27b63caaf650b1f57
Reviewed-by: Richard J. Moore <rich@kde.org>
This adds a test for a QSslCertificate containing extensions which
are marked as critical.
Change-Id: I314e1f5c9943bcad5d43129a97f9f834882dc6fb
Reviewed-by: Richard J. Moore <rich@kde.org>
This tightens tests performed on a certificate's extensions by checking
isCritical() and isSupported() for all extensions. It also explicitly
checks the keys when value() returns a QVariantMap.
Change-Id: If51c55be25bbcd09cc3a6712ddfea2bf9a01360f
Reviewed-by: Richard J. Moore <rich@kde.org>
The practical uses of a POD QElapsedTimer are not really that clear, and the
number of misuses of this API are quite high. Default the state to invalid to
prevent against mistakes.
[ChangeLog][QtCore][QElapsedTimer] Is no longer a POD.
Change-Id: I267292acf2bfca7404e3e449dd04410441d7ce26
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Previously, this failed because QEasingCurveFunction only had a linear
behavior.
The fix is to change that and let QEasingCurveFunction handle
any of the simple "non-parametric easing" functions.
Task-number: QTBUG-38686
Change-Id: I666d59e10ceb589dcc52956b16a6f0c259aebdad
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This adds the infrastructure for reading and writing encrypted private keys
when using non-OpenSSL backends. Each platform must provide its cryptographic
encrypt / decrypt functions.
As WinRT already uses the common parser, this commit includes an
implementation for that platform.
Done-with: Andrew Knight <andrew.knight@digia.com>
Task-number: QTBUG-40688
Change-Id: I0d153425ce63601ff03b784a111e13962061025f
Reviewed-by: Richard J. Moore <rich@kde.org>
Instead of simply doing a match against a string S at offset O > 0
(and checking the result), test that the results never change when matching
against the substring starting at (O - i) at offset i, 0 <= i <= O.
Change-Id: Ib7fd648ca0a36b93d145267ebfb792c46ca4e4f5
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
When 'cursorPos' is out of bounds ([0, lineEnd]), this method crashed.
Change-Id: Ia0540ab3afbffb5c598f7b8515263cce3b3928e4
Task-number: QTBUG-40753
Reviewed-by: Dominik Haumann <dhaumann@kde.org>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
This change adds the ability to decode ASN.1 INTEGER fields,
provided they represent a positive number of less than 64-bit.
This is needed for PKCS#12 decoding.
Change-Id: Iafb76f22383278d6773b9e879a8f3ef43c8d2c8f
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
[ChangeLog][QtCore][QRegularExpression] Support for matching
using QStringRef as the subject's string type has been added.
Change-Id: Idb956bbbdf4213f9ebe035db32cd37cf3370c6bc
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Unify the code paths which test the normal match, the partial
match and the global matches. Not only does this remove the duplication,
but it will also enable the corresponding tests to be run over QStringRefs.
Change-Id: Ia2cbe7a540bbe864b0975c9353697bc06c99c397
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
QSslKey currently has methods which supposedly allow decoding and
encoding private keys as DER protected by a passphrase. This is
broken by design as explained in QTBUG-41038, as storing the encrypted
DER data alone makes no sense: such a file lacks the necessary
information about the encryption algorithm and initialization vector.
This change:
- explicitly stops using the passphrase when decoding DER in the
constructor. The behavior is unchanged, it is not possible to
read the encrypted DER alone.
- refuses to honor the passphrase to DER encode a private key. The toDer
method now outputs an empty QByteArray instead of garbage.
Task-number: QTBUG-41038
Change-Id: I4281050cf1104f12d154db201a173633bfe22bd9
Reviewed-by: Richard J. Moore <rich@kde.org>
This adds a test for 3DES encrypted keys in addition to the
current DES encrypted keys.
Change-Id: I229e3ef710e9ee23efa2a3275b89d958491de4a2
Reviewed-by: Richard J. Moore <rich@kde.org>
The native handle and import functions are now available for use in other
parts of the winrt backend.
Change-Id: I07e6f95b3411c3dc7c1a7a164544b18e5e435d01
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
This internal implementation of QSslKey can be used when OpenSSL is not
available. Encrypted keys are not supported, as the cryptography must
be supplied by a separate library.
With this commit, WinRT is migrated to the new implementation,
but qsslkey_winrt.cpp is left in place so that the missing crypto
implementation can be added later. This also means most of the expected
failures for that platform can be removed from the autotest.
Change-Id: I24a3ad1053bb72311613b28b3ae845aa1645a321
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
When setting a new screen, the code calls QWindow::destroy(), which
recursively destroys all child windows. It then calls create() on the
top-level window, leaving child windows destroyed. This causes crashes
if you have embedded native widgets.
Task-number: QTBUG-40817
Change-Id: Iaace2589f48bbfd5faaf5ff95357ff43b310504a
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Timer granularity means that sometimes this won't wait the full timeout before
vanishing the message. Add some extra tolerance so we don't unnecessarily fail
integrations.
Change-Id: I203ac16cda7bd1f0437dd3febc0509c17e86c25a
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This changes tests which use QSslCertificate::handle() to determine
if a certificate is null to use QSslCertificate::isNull() instead.
This is required for non-OpenSSL backends which do not actually
expose a private handle.
Change-Id: I9523ba0dd00d47ba337b543ad34840125db99bfb
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
As a side effects it also adds core templates types to the tests
Change-Id: I0e3338e0bffdf21982aa83d404c83288e54411f4
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
This patch adds indexOf and lastIndexOf with QRegularExpressionMatch
output overloads to QString. This allows to get the match corresponding
to the index returned.
[ChangeLog][QtCore][QString] Added support for retrieving the
QRegularExpressionMatch to indexOf and lastIndexOf.
Change-Id: Ia0ae2d3ff78864c7053ffa397874aca1d2b1c35c
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Testing using an empty string doesn't ensure that the regexp
gets validated. The function may return earlier thus making
the test useless. This patch adds a text to search in so that
no early optimization avoids the regexp validation part
Change-Id: If24b77385dde44a922d43e5ae1d7a5393d24f640
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This moves the socket backend's host name matching functions up to
QSslSocketPrivate so that they can be shared between backends. This
works, as there is no OpenSSL-specific code here.
Change-Id: I73c2081fdc2e60a44c90e90800d1e1877391a626
Reviewed-by: Richard J. Moore <rich@kde.org>
The QPanGesture recognizer requires single-point touch events. The touch
implementation in Qt 4 would test Qt::WA_TouchPadAcceptSingleTouchEvents
and forward single touch events if set.
Making this work in Qt 5 is a little bit more involved since the platform
plugins don't know about widgets.
Change the Cocoa touch implementation to send single-point touch events
to QWidgetWindow windows only. Make QApplication forward single-point
touch events only if the target widget has the
Qt::WA_TouchPadAcceptSingleTouchEvents attribute set.
Task-number: QTBUG-35893
Change-Id: I68712a5e3efb4ece7a81ca42f49c412e525eeb3a
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
The iterators for QJsonArray and QJsonObject are currently lacking an
operator-> definition. Unfortunately it is not possible to do in clean
way without redefining either the iterators or QJsonValueRef class.
This patch instead adds two fake pointer classes that are only used
to handle the operator-> return value.
Task-number: QTBUG-29573
Change-Id: Ief785a6afbbedc9e89cf3b6f3958c2c755997a66
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This element can be used for backends that do not offer all the
information that is needed when implementing a ssl certificate backend.
WinRT and the SecureTransport lack functionality in this area for
example.
The sources and tests are added for ssl and openssl configurations in order
to be tested. The condition for adding these can be changed as soon
as they are used by an actual implementation
Change-Id: I2b836133105afdc178bf3b1ee7d732bea069effa
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Useful if someone is ever forced to try diagnose what goes wrong with this test.
Change-Id: I4b5e607e6329b6ebad2b40b3f65d6cacbb6b7fcf
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Everything else passes, after some pending fixes in QtWayland.
Change-Id: Ibd8efcaab8c5210111854f1a7362434046a62898
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Reduces the average runtime of this test for me by ~600ms, but due to the
threading variance the exact reduction is hard to tell.
Change-Id: I96a9f949ae2381f69d9364e6637db0db4bd3b165
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
In some CI configurations this fails from time to time. Have to disable
it unless we can make it more robust somehow.
Change-Id: Iadd8904d7223a6aeff53dafa36b94df3f60e1ad8
Reviewed-by: Robin Burchell <robin.burchell@viroteck.net>
In Qt 5.3.0 a change was added which automatically adapts Common
script to surrounding scripts in accordance with the Unicode tr#24.
This broke *a lot* of cases of font selection because the font
selection algorithm is not prepared for handling characters with
adapted scripts. We need to disable this change for now and redo it
later with patches to font selection to avoid the regressions.
[ChangeLog][Text] Fixed several regressions in font selection when
combining different writing systems in the same text.
Task-number: QTBUG-39930
Task-number: QTBUG-39860
Change-Id: Id02b5ae2403c06542ed5d81e7c4deb2e0c7d816e
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
[ChangeLog][Important Behavior Changes] HarfBuzz-NG is now the default
shaper on all platforms. This results in a better shaping results
for various languages, better performance, and lower memory consumption.
Task-number: QTBUG-18980
Change-Id: I4d9454fc37e9050873df3857e52369dfc7f191b2
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Makes the test behavior identical across all platforms.
Change-Id: I5e564598d8e61588af2b73f04b4ca7c9b899c02a
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
kUCCollateDigitsAsNumberMask works only if kUCCollateDigitsOverrideMask
is also set.
Update 0: - test added.
Task-number: QTBUG-40777
Change-Id: I48bfec78f5f8439a51f8d749f0fc4397a72b29f2
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
On both iOS and Android it is very confusing to be able to move the focus to both, the line edit and the outer frame that is the spin box.
For Linux this fixes an issue that orca would not read the value correctly after pressing the up/down buttons.
Task-number: QTBUG-39861
Task-number: QTBUG-39442
Change-Id: I73c50c91e9021324c52d168d537afd0ea719a48f
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
WinRT is a sanboxed environment, hence files can only be created in
some writable location.
For some tests we reset the current directory to minimize the required
changes. We cannot do this for the application lifetime as the test
also has cases where it reads files relative to the executable inside
the sandbox.
Change-Id: Ib9d37c8cffd191f0d1055f835c11d10887923378
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Convert qWait to QTRY_ where we can, and make the qWait durations explicit (not
buried in a function call, but inline in the actual test) where we can.
Total runtime for me goes from 91 seconds to 2 seconds.
Change-Id: I45b3562cb94721a521718365fd51a4172a2e4e18
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As a side effect, QString::simplified() will always return a detached
copy, even if it's the same contents.
QStringRef::trimmed() can use the same calculation algorithm but can't
use the trimmed_helper() template function due to its lack of a
constructor taking begin pointer and size (std::string_view could do
it). That constructor can't be added because QStringRef always refers to
an existing QString, not to data in memory.
Change-Id: Ib966c1741819c68c6bac5fcbb00f8ac818b3ccab
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This is even more common than the QByteArray equivalents.
Qt Qt Creator
const & && const & &&
toLower 71 50 45 26
toUpper 35 8 46 35
Change-Id: I8b797d2321b22ce414c23656c5f1709ac649c423
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Those operations aren't very common with QByteArray but this is easy to
optimize.
Qt Qt Creator
const & && const & &&
toLower 34 10 0 1
toUpper 3 1 0 0
Change-Id: I2097955f4c889ea5a21903c35ddbc0ff27bf62c5
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Do a check first if we need to transform before doing the transform.
This means we won't detach when transforming data that is already
correct.
And instead of using QChar, use our own hand-rolled table. In a proper
LTO build, the QChar calls would be resolved to a lookup of the Unicode
data, but not many people do LTO builds, Therefore, this means a great
speed-up is achieved by simply avoiding the function call. The extra
gain in performance comes from the simpler translation table instead of
the more complex full-Unicode data.
Also as a consequence, this changes the handling of two characters in
Latin 1: 'ß' should be uppercased to "SS" but we won't do it, and 'ÿ'
can't be uppercased in Latin 1 ('Ÿ' is outside the range).
Benchmarking is included. Comparing the Qt 5.4 algorithm to the new code
is almost 20x faster. Other alternatives are included in the benchmark
and are all faster than the current code, though slower than the new
one. While all of them could compress the tables to be smaller or shared
between uppercasing and lowercasing, they would also expand to more code
(though probably less than the extra bytes required in the full
translation table). In the trade-off, I decided to go with simplicity
and most efficient code.
Change-Id: I002d98318d236de0d27ffbea39d662cbed359985
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Takes the total time for this test from ~1.2 seconds to ~0.42 seconds for me.
Change-Id: I426e600a7afe01d7343108b432eda8b83d6f3d85
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This takes 300ms off the total time for this test.
Change-Id: I230b8a58315797a81579f6a07da282b0dc40637d
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Time taken by this testcase reduced from 7 seconds to 5.1 seconds for me.
Change-Id: I93b1c5fbc7d9d6515c9ce51a64fdd5c2ffbd54c8
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
