Don't needlessly show a bunch of special case debug messages
unless debugging is enabled.
There used to be a barrage of scary message when using
run_pro2cmake.
Change-Id: I49ab3522e11844a99653034b5f15a634a368d227
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Replace the use of the unqualified qvkgen target with the fully
qualified one, as we can be sure that that target exists during a host
build as well as when cross-compiling.
Change-Id: I31ce3d9f2fd629668a275da9114ab55339b82c31
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In gui's CMakeLists.txt we have
if (NOT ANDROID)
...
add_qt_simd_part(Gui SIMD neon SOURCES ...)
...
endif()
and later
if(UNIX AND NOT ANDROID AND NOT APPLE_UIKIT AND NOT INTEGRITY AND NOT (TEST_architecture_arch STREQUAL "arm64"))
add_qt_simd_part(Gui SIMD neon
endif()
Since add_qt_simd_part internally uses an OBJECT library to compile the
sources with different flags and then link into Gui (in this case), we
may end up with an error when add_qt_simd_part is called twice for neon,
because the constructed target (Gui_simd_neon) exists already.
We can re-use an existing target though, as the SIMD features is the
same.
Change-Id: I7a21c6e66b47e918a53fa3b1a7db9e053ecc8d87
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Every time the qtbase project was reconfigured, the list of
config tests results was appended to a cache variable which was
never reset, resulting in multiple copies of the same values
being written to QtBuildInternalsExtra.cmake.
Make sure to clean the cache variable before appending to it.
Also change the variable to be all upper-case, to be consistent
with other cache variables.
Change-Id: Ic12046730a080595e19377981a726bc330641dc1
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
A developer can pass either -DQT_NO_MAKE_TESTS=ON or
-DQT_NO_MAKE_EXAMPLES=ON to exclude tests or examples from being built
as part the default make target (when you write just make or ninja).
With ninja, tests and examples can be built separately one by one,
by typing
$ ninja tst_foo
or
$ ninja example_bar
Same can be done with the Makefile generator.
$ make tst_foo
All tests / examples can be built in one go by typing
$ ninja tests/all
or
$ ninja examples/all
With the Makefile generator unfortunately it's not as nice and is most
likely an implementation detail, but it can still be done by running
something like
$ make -f CMakeFiles/Makefile2 tests/all
or
$ make -f CMakeFiles/Makefile2 examples/all
Change-Id: I34f168b3ab41e952a21d3ace5634e25a9f41922e
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Previously repo/tests/CMakeLists.txt was a standalone project on which
CMake could be called. This was useful for Coin to be able to build
and package only tests, but was a bit troublesome because that means
having to specify the usual boilerplate like minimum CMake version,
which packages to find in every tests.pro project.
Instead of having a separate standalone project, modify the top level
project and associated CMake code to allow passing a special
QT_BUILD_STANDALONE_TESTS variable, which causes the top level project
to build only tests, and find Qt in the previously installed qt
location.
This also means that when building a repo, we generate a
${repo_name}TestsConfig.cmake file which does find_package on all the
modules that have been built as part of that repo. So that when
standalone tests bare built for that repo, the modules are
automatically found.
qt_set_up_standalone_tests_build() is modified to be a no-op because
it is not needed anymore. Its usage should be removed from all the
other repos, and then removed from qtbase.
Non-adjusted tests/CMakeLists.txt projects in other repositories
should still be buildable with the current code, until they are updated
to the new format.
Adjust the Coin build instructions to build the standalone tests in a
separate directory.
Adjust pro2cmake to generate new structure for the tests/tests.pro
projects.
Adjust the qtbase tests project.
Fixes: QTBUG-79239
Change-Id: Ib4b66bc772d8876cdcbae1e90ce5a5a5234fa675
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The module does not have an associated library, but for some reason
on Windows install(EXPORT) still created Targets files which
expected a library to be present.
If then find_package(Qt6PlatformHeaders) was called, it would fail
configuration with not finding the library on disk.
Switch the module to be a HEADER_MODULE.
Also remove the extend_target call, because there apparently is no
need to specify the headers one by one (and also because adding
sources to an interface only library would break the configuration
step).
syncqt will be executed on all the headers under the module source
location, regardless of specifying them in the project.
Change-Id: Iec4cc8fab8906e6288dae423c878e260dd922ce5
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
When a _nolink target is exported, instead of getting the original
namespace prefix, it gets the Qt6 prefix
(OpenSSL::OpenSSL_nolink -> Qt6::OpenSSL_nolink).
There is some special case code in Network autotests which tries
to access the former target name, which doesn't exist when building
standalone tests.
Make sure to create a Qt6:: library alias for _nolink targets during a
build (so before the library is exported), and change the Network
autotests project to use this Qt6:: namespaced library, which will
ensure it is found both in a standalone tests build and in a regular
Qt build.
Also make sure to actually call find_package to find the OpenSSL
library when building standalone tests, otherwise configuration will
fail.
Change-Id: I3da5b958e72e745a50380f8ab1644459a7c6b005
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Don't call qt_android_dependencies for interface libraries.
Also make sure not to set properties which don't start with
INTERFACE_ prefix.
Change-Id: I0afdffd34c9aebe0d7ac4731b57dd4d505f84570
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
It only makes sense for non-interface libraries.
Change-Id: I80ac942ed546a6ac866e827aa2026e4e6ac897b2
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
The reason is that interface libraries have to have properties
prefixed with INTERFACE_ and more importantly we don't set the
property for interface libraries at the moment.
Amends d1542e8a73.
Change-Id: I86bf99995278b9086fa0e3815e10d5d54d9ea4dc
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
Now that 5f160a3699 is merged to
wip/cmake, we should be able to remove the previous workaround of not
linking in the bearer plugins.
Reverts 78b89547ad.
Fixes: QTBUG-79211
Change-Id: Iaa6633bd74d51ceeed9fa1ffb536445ef817764b
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Replace condition x86 to i386 to match other platforms.
Regenerate src/gui/CMakeLists.txt
Disable SSE4 on android x86 to match qmake.
Change-Id: Ic0d330206f2d70a79d72553aa3ff0f91ff58119c
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Feature conditions that used BUILD_SHARED_LIBS evaluated to false,
e.g. FEATURE_framework. The options must be declared before the
configuration files are included.
Change-Id: I1ccda8234b334371d22e19f7f6d4fba3a1e7b857
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Convert benchmark executables to add_qt_benchmark().
Currently add_qt_benchmark just calls add_qt_executable() and
ensures that it they build under CMAKE_CURRENT_BUILD_DIR and do not
install.
Add QT_BUILD_BENCHMARKS option to enable/disable building of benchmarks.
Change-Id: Id0bc676698d21d50048d97d9abef51d92ccb6638
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The include does not join the required libraries. When building the
tests in a separate build directory this works for some reason (that's
why the CI doesn't catch it). Building everything top level breaks
though.
Considering this happens in maybe two places, I'm not sure it's worth
the effort of fixing the porting scripts.
Change-Id: I104ab9717257cbe8dfd5112dffd0d0b002cdb09e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
In qtvirtualkeyboard/src/plugins/lipi-toolkit/3rdparty/lipi-toolkit/src/lipicommon.pri
we have TARGET = $$TARGET$$qtPlatformTargetSuffix which keeps on recursing.
Change-Id: Ia0e020c7258cd87bba9b9681ed7b4568e8f0c9c2
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The target naming has been fixed, it used to be taken from the include,
but now that we added the real tst_qeventloop we have a name clash.
All that's needed to fix the situation is regeneration of this cmake list.
Change-Id: Id336906f30494dfa92cf5e2812f8b1a8771a992f
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The last set would override the variable instead of appending to it,
thus QT_DISABLE_DEPRECATED_BEFORE was never set.
Change-Id: I173b91704a855fcda1f2b86172d318e3953466db
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Ran make format.
Change-Id: Ib4fc021c30834a69a9a5df653435dd92dc6a9c05
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If we do not encounter the load(qt_plugin) statement in the .pro file
but we do see the entry CONFIG+=plugin, treat the target as a regular
CMake library instead of treating it as a qt_plugin by default.
Change-Id: I67ad5c865a1a5ab691a6b0d86c2db4b686aa04dd
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This patch converts all add_executable calls when building for Android
to a module library and replaces the call to add_test() to use
the android testrunner binary.
Change-Id: I10ba5919217cdc93cc2cbbb7d13ad9d10fc5ac1a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
e1fd607493 in qtbase removed the
qml1 imports enum from qlibraryinfo.cpp, qconfig.cpp, etc.
With the recent merge from dev, this was not adjusted in
qt_generate_qconfig_cpp, and thus we generated one too many strings
in qconfig.cpp, which resulted in
QLibraryInfo::location(QLibraryInfo::Qml2ImportsPath) returning
"imports" instead of "qml" subfolder, thus causing all qml modules
not being found.
Fix this by removing the extra qconfig.cpp entry, and all other
references to the location.
Change-Id: I128f667281138e2e0ef0fe1ced4af0405c532fef
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Equals_value check that if the property is same as given value.
Equals_property compares properties in this case the OS of target and host.
Change-Id: Ica42f0f99562911a97d2f6bd02bd8a6420c980ac
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add the above option to android test runner since its not required
when building with Cmake.
Change-Id: Ie5c9b0af29cfa76802723960071b3bd2a37a56a5
Reviewed-by: Qt CMake Build Bot
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
This patch adds two custom targets to generate android apks. The
targets are named ${TARGET}_prepare_apk_dir and ${TARGET}_make_apk. The
first one insures the binary is copied to the right location and the
latter invokes androiddeployqt on the apk directory.
Change-Id: I8152cef387b50ec03ee2bfd92b56910a6f22754c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This is needed for tests/auto/gui/kernel/qguiapplication which includes
the qcoreapplication test. Without this change, the target name is taken
from the included .pro file, instead of from the current file.
Change-Id: I2d8a207fd70a49ad956fb9a83a59811d89682082
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
When adding resources inside a condition, we'd end up with lines
containing just spaces.
Change-Id: I623203d042e2492bdd72f97d8b9d90517040b0df
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When we don't find the xinput library on the system, build it ourselves.
Change-Id: I399e847513cdd1c2dcdc1d862265284002f8808a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
Update configurejson2cmake.py to also write out the libraries compile
tests depend on.
Change-Id: I22dbc227a33b9b5d39a2198c6ee6062e7e1bf3de
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Use STRING type for install locations as we use them relative to the
CMAKE_INSTALL_PREFIX.
PATH type will get expanded to absolute paths by newer CMake versions,
so that breaks our logic.
Change-Id: I36be1f0378c4fb07ad8db0051d540f9d243000be
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
