Prevent call to activateWindow() for minimized windows in
QWidget::setWindowState() by clearing the flag.
Fixes: QTBUG-46763
Change-Id: I40389d0906438ffe251fc79f18a523ecb53edb1b
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
When calculating the header section size based on its contents when a
stylesheet is used, the size hints from the stylesheet are used. In case
if the stylesheet specifies only one of the sizes, the other is set to
-1. Because of this the actual content size is ignored.
The solution is to calculate the size based on the application style, in
case if it's not specified in the stylesheet.
Fixes: QTBUG-75615
Change-Id: I3453fa623d75b6b32832edf753de6e3e4e7f5a22
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
From macOS 10.15 and iOS 13 forward it's not possible to create font
descriptors for system fonts such as .AppleSystemUIFont based on the
family name.
This means we have to preserve the font descriptors we get from CoreText
for fallback fonts, so that we can populate them along with the family name.
Task-number: QTBUG-78821
Task-number: QTBUG-77467
Change-Id: Ifce01da65f90afb7dc2bc3005c3c5870b9c116de
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Some windowing systems (i.e. Wayland) do not allow applications to steal window
focus.
Normally, we would just replace qWaitForWindowActive with
qWaitForWindowExposed, because that is usually the intent, in this test
however, there are many occurrences of both variants right after each other.
And, as described in the commit message of 153e8b49a, this may be because
window activation may cause repaints, and we want to wait for it to reduce
the chance of receiving an extra repaint later (possibly causing tests to be
racy).
Therefore, I took the conservative approach, and kept the qWaitForWindowActive
calls, except when the capability is not available. Hopefully this will not
cause flakiness in existing platforms, while also allowing tests to pass on
platforms where activation is not supported.
Task-number: QTBUG-62188
Change-Id: I15502baa28c464a808d585a5e6d67c9b745b17ae
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Amends and fixes 7236721bf8
where the iterator category was changed from bidirectional
to random access without adding all the required functions.
Fixes: QTBUG-57353
Change-Id: I2c96448facb222c8b8f9ad4423cb0dbd1ed098f4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Replaced the usages of the following deprecated APIs:
* QDesktopWidget::screenCount() -> QGuiApplication::screens().size()
* QDesktopWidget::screenGeometry(int) -> QGuiApplication::screens().at()
* QDesktopWidget::screenNumber(QPoint) -> QGuiApplication::screenAt(QPoint)
- Added notes for the QWidget *QDesktopWidget::screen(int), which
currently has no replacement.
- Fixed the tests to build conditionally, only when these APIs are
enabled.
Task-number: QTBUG-76491
Change-Id: I2fdec96d0a6a4fc782c53549b05a5556412b8305
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
I can only guess: the compression quality was declared volatile
to make it survive across a setjmp/longjmp. However, executing
a longjmp makes the code never touch the quality variable again,
so volatile isn't needed.
Change-Id: Iba1559d66200b900fbad55aa0ee3011b2407eead
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
This gives the user the opportunity to employ BASH_ENV to circumvent
macOS System Integrity Protection and set variables like
DYLD_FRAMEWORK_PATH.
Fixes: QTBUG-57204
Change-Id: Icd99d903a3be76fabd509e204ea61a254a96609c
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
MySql 5.0 was released 2005 so it's time to remove support for MySql 4.x
14 years later.
[ChangeLog][QtSql][QMYSQL] Removed support for MySql < 5.0 since 5.0 was
released 14 years ago.
Change-Id: I45005accdffefbd9338ac0e710512a4c7ea8e09e
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The JPEG writing code features a setjmp/longjmp pair to deal with error
handling. In doing so, it creates UB by touching local objects after the
setjmp and then after the corresponding longjmp.
The rules on what we can do are quite strict: objects that are
1) local to the function calling setjmp;
2) not qualified with volatile;
3) written into after the setjmp;
have indeterminate state after the corresponding longjmp call
(man 3 longjmp, C 2x draft N2346 §7.13.2.1.2).
Not making any assumptions on any compiler used: let's just say that
using them in any way is UB.
Luckily, no compiler exploits this (yet), and the code works just fine.
But we know the drill -- never play this game against compilers, because
you will lose.
So: we have a couple of those objects around in the writing routine
(cinfo, row_pointer), that violate the rules above.
Unfortunately we can't simply mark them as volatile: libjpeg's API
expects them not to be volatile. Casting volatileness away
and then touching an object in any way is undefined behavior out of the
bat (C 2x draft N2346 §6.7.3.7, C++ [dcl.type.cv]).
Given the code needs to do 3), and we can't work around 2), then work
around 1): define them to be non-local to the function doing the setjmp.
Introduce a small helper that declares such objects and then calls the
function doing the actual work, with the setjmp/longjmp.
An overall alternative would be of course stop using setjmp/longjmp, but
libjpeg's API doesn't really seem to allow this -- when the library
calls user's error handler, that error handler is expected not to return
to the library (so a longjmp or an exit/abort are mandatory).
Side note: all the code using libjpeg I've researched to debug
this has this very same strange issue:
* GDK-pixbuf's [1]
* ImageMagick's [2]
* and even libjpeg's [3] and libjpeg-turbo's [4] own examples.
[1] https://github.com/GNOME/gdk-pixbuf/blob/master/gdk-pixbuf/io-jpeg.c#L581
[2] https://github.com/ImageMagick/ImageMagick/blob/master/coders/jpeg.c#L2338
[3] https://www.ijg.org/
[4] https://github.com/libjpeg-turbo/libjpeg-turbo/blob/master/example.txt#L331
Change-Id: I34a810db468f73423478cd3ac71b888f4b11cb28
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The reading code protects a local variable with volatile. In this case
the only possible reason to apply volatile seems to be protecting the
variable across the subsequent setjmp/longjmp. However, the variable is
never accessed after the longjmp (the function returns). So, drop the
volatile.
Change-Id: Ibecb11a9edcc6027b2fd52b555287ad53375a5d0
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We made qRandomCpu() call qCpuHasFeature(), which needs to test that
RDRND works and does so by calling qRandomCpu(). So disentangle that by
making sure we don't recurse.
And by making sure that we fill the buffer with RDRND data, not with
RDSEED.
Fixes: QTBUG-79162
Change-Id: Ib5d667bf77a740c28d2efffd15cc583a9afcb97a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When this was refactored in 3bc10fb9bb to use unique pointers, a move was
added before the connection, so it would essentially always try to connect a
nullptr.
Change-Id: Iab7fce88bc73afd78e6b63ffaef7358f3f4ce7e3
Reviewed-by: Rainer Keller <Rainer.Keller@qt.io>
Translate checks like
contains(QT_CONFIG, c++11)
to
cxx_std_11 IN_LIST CMAKE_CXX_COMPILE_FEATURES
Also allows contains(CONFIG, c++11) and different versions of course.
Change-Id: I0f51a1ee7c92df6b87c31d0fb64c22fdba2002ec
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Make sure to process simd assignments in scopes by enclosing
the add_qt_simd calls into if blocks.
Change-Id: I3c7f2466cfa5bb0136d40deffb190ea8aabfb572
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
extend_target() does not handle the OUTPUT_DIRECTORY argument, so we
must handle it ourselves.
Change-Id: I31880a516ae185f3255b2a51f41d61ee6b1d9838
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It's probably best to make it follow the usual calling convention that
the associated (consuming) target is the first parameter of the
function. So first this change accepts both formats.
Change-Id: I1f20706b23d5e819e0eb689eecedb3afb49df3b7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The childEvent handler sets the enabled property of children as they are
added to the groupbox, but applications might later enable children and
check/uncheck the groupbox's checkbox in undefined order. In that case,
we would end up with enabled children inside a conceptually disabled
groupbox (the groupbox's checkbox represents the logical "disabled"
state), which breaks documented QWidget::enabled rules.
To make sure that all children are disabled as per the state of the
groupbox, we need to run that logic once the UI has been set up, and
before it becomes visible. This is what polishing is for, so listen
for that event in addition and handle it the same way as adding (which
duplicates things, but keeps existing code that might depend on things
being updated as they are added working).
Adds the case to the existing enabledChildPropagation test case.
[ChangeLog][QWidget][QGroupBox] Always disable children of a checkable,
unchecked group box before showing.
Change-Id: I978bd27b6f1a3f54ec745faeea529a98d0d93619
Fixes: QTBUG-25938
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Pass the QWindow as context to QIcon::pixmap(), which
enables it to return high-dpi pixmaps when needed.
Fixes: QTBUG-74100
Change-Id: I4556f0a98df8b6ba65376778379a03eb8c470d00
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The evdev touch handler is thread based and calls
QWindowSystemInterface::handleTouchEvent. The global variable
in qwindowsysteminterface.cpp is used without being protected by mutexes
which causes data loss and crashes when multiple touch screens are used.
Fixes: QTBUG-63584
Change-Id: I8b5bb04cc517fab96ac428b2bd2bc128b2ca1a54
Reviewed-by: Johan Helsing <johan.helsing@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Both the spline curves and (most of) the predefines curves are defined
as having start value 0.0 and end value 1.0. The spline and In/OutBack
functions would sometimes not produce that result precisely, so code
could not reliably depend on expressions like (easedValue < 1.0)
becoming false. Fix by explicitly handling endpoints.
Fixes: QTBUG-76781
Fixes: QTBUG-72630
Change-Id: I21be43af469a76c090154bffef8406a9baf2d0b1
Reviewed-by: Thomas Hartmann <thomas.hartmann@qt.io>
When we're flushing the backingstore to sub-views with their own layers
we don't want to pay the cost of uploading the whole backingstore to the
GPU in the case where we're dealing with a discrete GPU.
To work around this we make a copy of the appropriate part of the surfcace.
This results in additional copies of the data, and will need further
investigation to limit these.
Task-number: QTBUG-77447
Change-Id: I318ae80e433dd7b0a55fd5a598b19f114d8bd28e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The implementation of the default handler, [NSApp _handleAEQuit],
does a lot more than just terminating the application, including
sending NSWorkspaceWillPowerOffNotification if appropriate, and
deals appropriately with state restoration.
Change-Id: If725838fc0f40d09a0b8885eb3e7239499d8fea0
Fixes: QTBUG-18624
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Sending a message to a nil object returns nil, so there's no reason to
check the delegate before calling respondsToSelector, and we can use
the implicit _cmd argument to pass along the selector for the method
we're in.
For applicationShouldTerminate, if there's a reflection delegate but
it doesn't answer to applicationShouldTerminate it makes no sense to
skip our own logic.
Change-Id: Iafcd883a5c8cec1b35d2f95238de55eff060d71f
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
when it's in 'ON' state ("inverted" color in 'Dark' appearance).
Number are rather arbitrary and extracted with 'Digital Color Meter'
app to make it look similar to the native panel (to be honest,
this tool button on a toolbar not to be found in many native apps,
they use different buttons anyway).
Fixes: QTBUG-71526
Change-Id: Ie61e60b77f097f04550006612e4aab6f11bb954b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
A default-constructed QDateTime is invalid, but compared equal to a
valid one referencing the start of 1970. This lead to date properties
in QML being initialized invalid but not getting an onChange if the
first value they're set to is the start of 1970.
Fixing that then lead to some tests failing. Indeed, the original
equality check involved using toMSecsSinceEpoch(), whose value is
undefined unless the datetime is valid, without a prior check on its
validity: so ensure all uses of toMSecsSinceEpoch() are guarded with
isValid() checks.
Reworked tst_QDateTime::toSecsSinceEpoch() to use its bool column
(previously unused, after separating from toTime_t(), which uses this
column for "out of time_t's range") for validity of the datetime.
[ChangeLog][QtCore][QDateTime] Invalid datetimes are now treated as
equal and less than all valid ones. They could previously be found
equal to valid datetimes.
Fixes: QTBUG-79006
Change-Id: Ie72deb8af4350a5e808144d0f6e42dc8eb3ff5ef
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Provide a SKIP_INSTALL argument to add_qt_plugin for test cases with
plugins lacking install information.
Change-Id: Iddb3843fab1790d69d64686530a46057a2ff0477
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Now there are two of them, one used in qtbase and one in qtwayland.
In the future we should merge them.
Amends 08aba5ea0a
Change-Id: Ife98df28c762836277a02a34dd07e82ce7a1e871
Reviewed-by: Johan Helsing <johan.helsing@qt.io>
There is agreement to use black for formatting, run it and make flake8
happy with its output.
Change-Id: I800d764a50cacba0eac1d8efb5c1dee0cf10a4ad
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
not in is considered easier to read and thus recommended (flake8) and
avoid one temporary name that is never used.
Adjust flake8 to be compatible with black formatting.
Change-Id: Ia049adb2344f11b53c78574972f6d9d670f4e66d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
Avoid the massive code duplication in the two QObject constructors. The
only slight difference is the code path checking for isWidget; I'd say
that paying for that one is worth the price of de-duplicating.
Change-Id: I3af749738fe7d6b7adf287009d1815396a2f1407
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Cleanup QtWidgets examples:
- use nullptr (clang-tidy)
- use member-initialization
- adjust the style
- fix includes
Change-Id: Ic5448606aacc525ea60b615a69227017aa2b821a
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
QWidget::mousePressEvent is documented to implement the closing of
popups if the widget is a popup. QAbstractScrollArea is one of the
QWidget subclasses that might be used as a popup as well, so instead of
just ignoring mousePressEvents, pass the event on to the QWidget
implementation for regular popup handling.
Change-Id: I05f77a334945f3c167f729f30bc022599230379b
Fixes: QTBUG-60885
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
std::unordered_set only supports forward iteration for good
reasons. Align our API with this by deprecating reverse
iteration and the operator+/-() for iterators.
[ChangeLog][QtCore][QSet] Reverse iteration over QSet is now
deprecated.
Change-Id: Ia6e3346a6474c454c63010d855850ae4ff12e1a4
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Users should not call any QList API with indices that are out of
bounds. Deprecate this behavior and make sure users get warnings
in debug mode and assertions if they disable deprecated functionality.
[ChangeLog][Important Behavior Changes] Calling QList::insert() or removeAt()
with an out of bounds index is deprecated and will not be supported in Qt 6
anymore.
Change-Id: I97adecc2e2aabd36ea2cc69e0895d625f78b32a0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Change-Id: I13431e45ef329921a8846c38047f704a299a1a94
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
