Xcode uses project and group relative file paths, but to keep things
simple for ourselves we use absolute paths everywhere. We now make an
effort to actually make these paths absolute before telling Xcode they
are.
We also make the visual representation of the files inside Xcode be
just the filename, not the full path, like Xcode itself does. This
is among other things a prerequisite for Xcode to stop complaining
about missing launch images for retina 4-inch screens.
Change-Id: I5ff6bf07f61888e3c9fe2f64cbc2beb896b8442d
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
We build "Supporting Files" out of QMAKE_INTERNAL_INCLUDED_FILES, which
is really not supposed to be exposed to the user like that, but since
the variable will hold user-included pri files eg., the Xcode generator
piggy-backs on this variable to list the files.
To make the project view in Xcode a bit cleaner we explicitly exclude
any file living inside the Qt directory, meaning we won't show all the
pri and prf files from Qt's mkspecs directory anymore.
Change-Id: I828700aceac5fdf3ea2b27d9ba3885543c2ad137
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
the c'tor always determines the group itself anyway.
Change-Id: Ia8f1e747aaefdab164beae34851aa99cec9b790a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
At the very least, include the files named in the sources, like
HEADERS. It was quite surprising to send a tarball that included the
.pro file and the .cpp sources, but none of the headers.
On the other hand, the .qmake.cache file need need not be sent either,
despite being include()d in qmake's processing.
Change-Id: I8f48ca3e8040f954f321f4643b01c0f36aafe2d7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
With MSVC it takes minutes to compile pbuilder_pbx.cpp.
So let's remove this generator that's never used.
Change-Id: I13038d551283d96dfb0baf0b8a8a68c6538193c8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Depending on *.o in the Xcode output dir did not actually result in a
proper dependency. In Xcode5 this didn't matter much, as the effect was
that the build phase was run every time, but in Xcode6 the phase was
skipped. We now depend on the object directory itself, which will get
its modification time updated to match any rebuilt object files.
Change-Id: I8fa6f06c9008c4ce8f7fde7706057ce101bb5727
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
the condition is now consistent with that of the target itself (which
means that by setting target.CONFIG=no_dll one can actually suppress
installing the target itself even if it's not a dll, but anyway).
Task-number: QTBUG-39253
Change-Id: Id4684a550a33b463594ab537eaa9e1cbfb61e4ff
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The original dist target no longer copies files around, but
merely does the final packaging. It depends on a new recursive
distdir target, which handles copying distfiles to the distdir.
[ChangeLog][Tools][qmake] Added 'make dist' target for subdirs
projects (unix only)
Task-number: QTBUG-21910
Change-Id: Ib59139c3fe196caf832d8dcefab484ab91f1f5ce
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
A typo caused qmake to stop output dependency information
added by the depend_command clause.
Task-number: QTBUG-13334
Change-Id: I00fabc87438ce94e80341e6f88aa2e0eaab57e19
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
This patch removes the need for the user to put a dot at the end of the
bundle prefix which makes it's use more consistent and intuitive.
The prefix is based on what Xcode calls the "Company Identifier",
basically "com.digia" plus the product name. Changing that to
"com.digia.prefix-" and the product name to "Foo" results in a bundle
identifier of "com.digia.prefix-.Foo" which is in line with Xcode.
Change-Id: I9b62fc4dee1df51b523ce890a8896ea58ea2c62d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Instead of sometimes ending up inside Content/Resources. The two build
phases PBXCopyFilesBuildPhase and PBXResourcesBuildPhase have different
semantics of where to place the files. For the former we use the root of
the bundle as the destination, and this is how QMAKE_BUNDLE_DATA is
documented and used, as well as how unixmake2.cpp implements it. The
latter on the other hand, always ends up in the resources subdirectory
on OSX.
Task-number: QTBUG-35318
Change-Id: I45bbd0dfe7ea78ae330ecb0c91efa74e1c76c9eb
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
The ICON qmake variable is implemented in the Xcode generator through
the ProjectBuilderSources::files() function, where we append the icon
to SOURCES (for some reason). This means we can't exclude non-object
sources when writing out PBXBuildFile entries, as the icon file entry
is referenced later on in the bundle resources phase.
This is a partial revert of 66f6e5b162 which introduced the broken
logic.
Change-Id: I120d2325165a1eefd3961a9162e9e5eb3a576c36
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Tweak qmake, add mkspecs for emulator and device, adjust the
manifest template for WP8.1, and add missing icons.
Change-Id: I7a6405fa85297ae4cc8522015274e65fb7a315a6
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
If the project has a custom Info.plist assigned to
QMAKE_INFO_PLIST, we should leave it as-is without
scanning and replacing contents inside it. Since we
always copy the file to the build folder at qmake
time, any later attempts to modify the source file
will not have any effect.
A better solution is to just reference the custom
plist directly from the Xcode, without modifying it.
This change will also stop unixmake2 from assigning the
default plist to QMAKE_INFO_PLIST, since we need to
know in the xcode generator if the variable was set in
the project or not.
Task-number: QTBUG-38260
Change-Id: I3c488b2960170c544d94f9db89d3ca95ee290bdd
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Qmake tried to extract the actual executable part of an
extra compiler's commands and depend_command value and
then "fix" it by replacing the directory separators in
it with their local versions and calling QDir::cleanPath
on it.
This misfeature was implemented incompletely and led to
unexpected results (see the numerous attempts to fix
QTBUG-16372).
The user is responsible for passing a correct command by
calling the shell_quote or shell_escape functions if
necessary.
Change-Id: Ic4bfe9eeb697775cd99c865e7a9d335e63605dea
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
A pro file that adds files to QMAKE_BUNDLE_DATA using relative
paths will fail building if doing shadow builds. The reason is
that we look for the files inside the build dir.
This change will make sure we resolve files from the source dir
when not using full paths.
Task-number: QTBUG-37054
Change-Id: Ic1067861097b3b6a640ee862472d728d6188576a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
f412f2b5 refactored the platform tool set retrieval, but made the
call too early to choose the right tool set on Windows Phone. This
fixes the call so that it does not depend on the WinPhone member variable,
and also makes it forward-compatible with Windows Phone 8.1.
Task-number: QTBUG-38516
Change-Id: Ide91563f5c7f909c4d1a258adc29af6c94595dc9
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
On Android, there's a limitation set on the names of the libraries
you deploy that they must start with "lib" and end with ".so", so
Android apps will link against and deploy with the unversioned
libQt5FooBar.so libraries. When cross-compiling on Windows however,
due to the lack of symbolic links, the only installed library
used to be the main library target "libQt5FooBar.so.X.Y.Z" (for
version X.Y.Z.) This has been worked around in packaging, but
breaks building add-on modules on top of Qt, and is clearly
wrong.
This patch introduces a new "unversioned_libname" configuration
in qmake which is currently only supported for the Unix makefile
generator and only enabled for Android builds. When it is enabled,
only the unversioned library "libQt5FooBar.so" will be created.
Task-number: QTBUG-38347
Change-Id: Ia8897ca7a23a62e2a526d0e02854899b02eb19dc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
it needs neither native separators, nor a trailing separator.
the QMAKE_PKGCONFIG_INCDIR default was already ok.
Change-Id: I1048b3870fd3ca09aa76b41aecda7d90402aa64a
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
fileFixify must not be called twice on the same file path, since it will
convert an absolute path from the shadow build to an absolute path in
the source dir. The first fileFixify occurs in MakefileGenerator::init,
along with the fixifying of INCLUDEPATH.
Change-Id: I607870573a80eaf834ea5f540bbe1451ec983114
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
To enable windows xp support, we must do two things:
1. linker flag must be /SUBSYSTEM:CONSOLE,5.01 or
/SUBSYSTEM:WINDOWS,5.01. For x64, the version is 5.02.
2. Do not use Windows Kit 8. Win SDK v7.1A is recommended. Prepend the
right include paths and lib paths to INCLUDE and LIB before
building.
The Windows XP target support is enabled by passing "-target xp" to
configure.
Task-number: QTBUG-29939
Change-Id: I84c8439606cc2a9d27d64947702846faa4f1e4a2
Reviewed-by: Lucas Wang <wbsecg1@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
In a subsequent commit we will need access to more information of the
project object. This is merely a refactoring.
Change-Id: I40e501d037eb7d0295e1057e7b86e404e88e6ca3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Since VS 2012 the linker supports the /MANIFEST:embed option, which can
be used to embed the automatically generated manifest without calling
mt.exe. Using this feature simplifies our generated makefiles, esp. in
the case of incremental linking.
Task-number: QTBUG-37363
Change-Id: I2c2d8d2abf36c1b9e7b41bc15244344aab8f5b6e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The Windows SDK 7.1 command prompt sets this value to "WindowsSDK7.1"
through its SetEnv.cmd batch script. The MSVC Express Editions do not
include a 64bit compiler toolchain, but the Windows SDK does, so this
change makes it easier to build qmake projects for x86_64 when using
the Express Editions, by running qmake from the SDK command prompt.
See also:
http://msdn.microsoft.com/en-us/library/9yb4317s%28v=vs.100%29.aspxhttp://msdn.microsoft.com/en-us/library/ff660764%28v=vs.100%29.aspx
Task-number: QTBUG-31185
Change-Id: I49d3e159ed67f64490a3d57c5471d540d76ae13f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
When running a amd64 VS shell we must not call the x86_amd64
cross-compiler, because it won't be able to start.
Instead we're calling the native amd64 compiler now.
Change-Id: I6968cde3b24c1938b6e0d82f513e49724455f3cc
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Currently the bundle identifier is build using com.yourcompany +
QMAKE_BUNDLE. This patch adds the handling of
QMAKE_TARGET_BUNDLE_PREFIX to build the bundle prefix.
Task-number: QTBUG-19006
Change-Id: I014279da6dbef393b0df36f6d4995e40ab105316
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Liang Qi <liang.qi@digia.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
/FS forces the compiler to synchronize pdb file writes.
This option is not needed when building with Visual Studio itself.
Still, qmake needs to know it when parsing the compiler flags.
Task-number: QTBUG-36535
Change-Id: Id5b68c4028844e0b95904e08b5121310a4ff13d6
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
This was broken for shadow builds. Adding the output directory to the
manifest file name fixes the problem.
Change-Id: I9e5b47a08f80f7afcfd76e13784fbaec912e50ad
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
windeployqt is a tool that aids in the deployment of Qt libraries and
other files on Windows. This feature (CONFIG+=windeployqt) adds
automatic invocation of windeployqt for qmake projects as a post-link
action. For Visual Studio projects, windeployqt is added as a custom
target which runs after linking, automatically adding the output as
deployment items.
Task-number: QTBUG-35630
Change-Id: I4cdcb1a7f70cedccb4a4e17be5eb9f5de35a4d66
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
If VCPROJ_ARCH is not recognized or unset, make "arch" default to x86,
or link won't find the libs.
Change-Id: If2cbda37a80c0fa43e1464775c036cebf10f931a
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This variable works like CLEAN_DEPS, but applies to the distclean target.
Change-Id: Ia30e8932b9acd6529298728dd5d0e038b0208d66
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
In release configs qmake sets DebugInformationFormat to None.
If ProgramDataBaseFileName is left unset, then VS 2012 will always
rebuild the complete project. Therefore, qmake now inserts an empty
ProgramDataBaseFileName tag if DebugInformationFormat is None.
Task-number: QTBUG-35570
Change-Id: Ifb91b0bbcf6614621bfe3b12429e2624bd16e77a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
VS 2010 doesn't denote "no debug info" as "None" but as empty tag.
This fixes a regression introduced by
7c3efdfb6a.
[ChangeLog][qtbase][qmake] fix VS 2010 project file generation
Task-number: QTBUG-35610
Change-Id: I18ae69a842d0b679a781f8d24c026d422da3a857
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Assume that C and C++ headers found in system paths will not change,
so we don't need to tell Make about them, nor do we need to scan their
contents either.
The previous qmake behavior matched gcc's -M switch; it now matches
the -MM switch:
-M Instead of outputting the result of preprocessing, output a
rule suitable for make describing the dependencies of the
main source file.
-MM Like -M but do not mention header files that are found in
system header directories, nor header files that are
included, directly or indirectly, from such a header.
This goes hand-in-hand with our use of -isystem to pass system paths
to the compiler.
Change-Id: I3346b6da496fe6495ac89c5286d066b343116f0e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This commit will make qmake use -isystem automatically for any
compilers that declare support for it for any paths that are listed in
QMAKE_DEFAULT_INCDIRS.
Change-Id: I36fefc6d5bba61671f65669f0ea42704b3c3cf31
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Do not include the project file twice or other
.pr? files outside the project tree.
Task-number: QTBUG-21910
Change-Id: I62af842282ccdc5b9099d9227d5395ebe3f0698c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This is a preparation step for 'make dist' target for subdir projects.
UnixMakefileGenerator needs these variables while extending
writeSubTargets() and writeDefaultVariables() for 'make dist'.
Partial cherry-pick of
https://qt.gitorious.org/qt/jpnurmi-qt/commit/8c4ef19
Task-number: QTBUG-21910
Change-Id: I02a616a98448bc3041ef0f4fd034bfb4c2199e41
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the diff -w for this commit is empty.
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I77bb84e71c63ce75e0709e5b94bee18e3ce6ab9e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In the case of multiple VS installations, a static variable wasn't
initialized. That led to wrong values in subsequent calls of the
detection function.
[ChangeLog][qtbase][qmake] fix detection for multiple VS installations
Task-number: QTBUG-35530
Change-Id: I3fc23bc99679fff640f39578a7074d16fe923334
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
This adds the required members to allow setting the SDK version, and uses
them when creating WinRT projects.
Task-number: QTBUG-35328
Change-Id: I500ea77c41e27cbcc850462034c0eba8c5d1f124
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
When creating a MSVC project file for WinRT/WinPhone, the package
manifest and all referenced icons should be automatically added as
content items.
Task-number: QTBUG-35328
Change-Id: Id7f34388c5ba6746392ddadbb795ef47bef34af6
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Visual Studio will default to generating metadata, even if it is not
written to the vcproj. Since there is no metadata file, the build will
fail. This change keeps a saner default for this option when generating
WinRT project files.
Task-number: QTBUG-35328
Change-Id: Ie693e270ef0b9d9677d53af0c60905f048235bc5
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Some cross-compiling mkspecs may require a different MSVC version than
the one found in the path (or the default version). This change allows
the preferred MSVC version to be selected from the mkspec's MSVC_VER
variable when found.
Task-number: QTBUG-35328
Change-Id: I19e03101e3921dfd5026421aef4630e11b9f131e
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Right now, the sublib targets, if any, show up between clean and
distclean targets. That's silly.
I doubt anyone is using sublib targets anyway, but...
Change-Id: I2beffc69f68fa7626ff4aa4a7cc1169b2c6c69a7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The default values for PCH, the -ZW switch, and CharacterSet aren't
ideal for WinRT projects, so adjust these accordingly.
Task-number: QTBUG-35328
Change-Id: I78021d0785fa84e15b1f17264daa599a9418f92e
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the respective code was removed in 375edf7
Change-Id: Ie31ef4bc8970b5396f50f1c4963f378df816242a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
it's bogus in the first place that the meta files contain windows paths,
but straightening that out is a prohibitive effort. so instead generate
additional s/// commands which take care of these paths.
fwiw, the generated s///i command is a gnu extension. but as we are
doing this on windows only where we are using our built-in sed command
anyway, this should be fine.
Task-number: QTBUG-33794
Change-Id: I46fcc598db12816ee56b5371ab184f6277eb3a22
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Otherwise the 'Wrapper' destination of the PBXCopyFilesBuildPhase
will be empty, and the files end up outside of the application
bundle.
Task-number: QTBUG-34457
Change-Id: I799db28185a6c5d3d940602914fd8ba14c538bf2
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
this avoids the nasty and conflicting vcXX0.pdb files in the build dirs.
VS will already do that.
Change-Id: I7bddaecf3f478edc78cd6654b5a1038db4fe04ff
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
that means further detaching the generation and installation of debug
info from the thing calling itself A Debug Build.
Task-number: QTBUG-32412
Change-Id: I4d79d1ae4806c8e4a2d6a7ccd030fb88385dd7d4
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the restriction to dlls is entirely unjustified.
Change-Id: Ia518dd16189572dea9e8f4280c88801b1393694e
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this option suppresses the installation of target (leaving only
dlltarget). however, it still installed target's pdb file.
Change-Id: Ia686a647c101ca66e74944d23171e120fc74515a
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
For the conflicts in msvc_nmake.cpp the ifdefs are extended since we
need to support windows phone in the target branch while it is not there
in the current stable branch (as of Qt 5.2).
Conflicts:
configure
qmake/generators/win32/msvc_nmake.cpp
src/3rdparty/angle/src/libEGL/Surface.cpp
src/angle/src/common/common.pri
src/corelib/global/qglobal.h
src/corelib/io/qstandardpaths.cpp
src/plugins/platforms/qnx/qqnxintegration.cpp
src/plugins/platforms/qnx/qqnxscreeneventhandler.h
src/plugins/platforms/xcb/qglxintegration.h
src/widgets/kernel/win.pri
tests/auto/corelib/thread/qreadwritelock/tst_qreadwritelock.cpp
tests/auto/corelib/tools/qdatetime/tst_qdatetime.cpp
tests/auto/gui/text/qtextdocument/tst_qtextdocument.cpp
tools/configure/configureapp.cpp
Change-Id: I00b579eefebaf61d26ab9b00046d2b5bd5958812
In XCode only the pro file was shown in the Supporting Files group as
it was the first one in the list. The others were not shown as it was
recreating the temporary QStringList each time instead of appending to
it.
Change-Id: Ifbc40a25156cf639eaa34b410f534726c41b6232
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
In particular this triggers in some cases of package building
where we are using a Qt version which for some reason has
forward slashes in its install prefix. Any mkdir command
run with this Qt build will fail because only backslashes are
recognized as path separators.
Task-number: QTBUG-34886
Change-Id: I2f957c6d348852ec555a67a35ae39921523b7b3e
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Starting with MSVC2013, a separate set of libs for Windows Store apps is
supplied, so make sure it is in the LIBPATH (and before the desktop libs).
Change-Id: I74f3f385c2db749010fbfe7e2d4c3d1228e4e603
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Warn the user if QMAKE_INFO_PLIST is set, but file not found.
An iOS application will not run or deploy without an
Info.plist present, and the error message given by
xcodebuild is not very informative.
Change-Id: I54f0e06de320a43c9f3261fe88761c41e3ccd022
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
On machines where multiple versions of VS are installed, the VS version
for the vc(x)proj generator is selected by the entries in the PATH
variable. The first VS installation that's found in PATH is used.
The former logic printed a warning if multiple VS installations were in
PATH and also fell back to the lowest version if a VS version was
registered with multiple install paths.
That's the case for VC 2012 express and prevented its usage.
Task-number: QTBUG-34357
Change-Id: Ia5c66a1aea0c40e4b7460b3aa6c7daee6673da44
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
But still fall back to 'com.yourcompany', just like Xcode does for the
initial launch.
Change-Id: I89afadefafc254a0014aca197741d42a0199943e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
If QMAKE_INFO_PLIST is set, check if the file it
points to is located inside the project source dir
rather than the build dir.
Change-Id: I6fb176349dae8e841b5e2dfdb9f9cb87f51a1e76
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Previously, the full path to the qmake project file was specified as the
key for projGuids when inserting the project GUID into this hash table.
The only place that items are inserted into projGuids is in
VcprojGenerator::collectDependencies at:
projGuids.insert(val.first, newDep->target);
In this case, val.first contains the full path for the given project being
processed at this point. (e.g.: c:\testproject\testproject.pro)
Further in sln/vcproj generation, projGuids is queried with the contents
of <TARGET>.depends so that users may specify another qmake project as a
dependency for a given target.
This occurs in two places, in two ways:
1) In VcprojGenerator::collectDependencies() at:
QString depend = dep.toQString();
if (!projGuids[depend].isEmpty()) {
...
In this case QString depend contains whatever is put into <TARGET>.depends.
Typically this is the plain name of the project you depend on.
(e.g.: testproj)
2) In VcprojGenerator::writeSubDirs(QTextStream &t) by proxy of
extraSubdirs which is a QStringList of the project depends should the
mapping in case 1 fail.
This case works much like the above case, attempting to use each
QString entry of the extraSubdirs list as a key in projGuids.
If either of the above two attempts are successful, the msvc solution is
configured in a way that creates a project dependency, ensuring correct
compilation order and other related behavior.
The fix here stores the target project (e.g.: testproject) as opposed to the
full project path, as that is what is expected in the <TARGET>.depends
statements contained in the qmake project.
Change-Id: Iee05661a64d7a3e4467c5ade48d801fbbfe981b5
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Chris Gilbert <cgilbert@knaldtech.com>
In VS 2010 and newer the /SAFESEH linker option is not passed as
additional option but is represented by the property
ImageHasSafeExceptionHandlers.
Task-number: QTBUG-34392
Change-Id: I3bd19078e695716050dd20736b6bc589bcb1cefd
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Xcode resolves dependencies at the beginning of each target, so if a
Qt preprocessor such as moc or rcc updates a cpp file Xcode will not
rebuild the cpp file until the next build.
We solve this by moving the Qt proceprocesor handling to a separate
aggregate build tool target, which the main application target then
depends on.
Change-Id: I8f9225b9603dc5f279b1cb60976fe709bd97963e
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Allows project files or mkspecs to call qmake recursively using system()
with the right arguments, which we use to fix the ios default_post.prf.
Change-Id: I90d69e2b156bb0f0af1279188b11f81c84c24fb8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The fallback value is an empty string anyways.
Change-Id: I77a2d3ad275321cb8b2e059fb6359f921cbc697c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Non-framework builds would automatically link to whatever Qt library
matched the config at the time of running qmake, eg hard-coded to
libQtCore_debug, while Xcode itself allowed the user to switch between
release and debug configurations.
We now append an Xcode settings variable to the library path, which gets
resolved at build time depending on the current config in Xcode.
Change-Id: I12873e38a28d9595ef3fd0ae0ad849e6744833a9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
the problem is that there is no sed command on windows ... so build it
into qmake and invoke that from the generated makefiles. cmake does the
same, after all. ^^
Task-number: QTBUG-33794
Change-Id: Ib7077e18acbc5edd79f714c5779a5ed31ea6c093
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The Xcode generator does not support exclusive builds, but still
generates projects that contain both debug and release configurations,
each with hard-coded differences such as whether or not to strip or
to generate debug symbols.
As a stop-gap solution we allow projects and mkspecs to add extra
settings that are limited to a given build. Long term we want to
rewrite the Xcode generator to support exclusive builds, but that
is a much bigger task.
Change-Id: I85056164bb1b3c8c6e0cf66410348cca7138eca5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Shared between UNIX and Win generators, and allows prfs after
default_post to rely on sane TARGET and DESTDIR values.
This allows us to clean up the DESTDIR logic in testcase.prf,
which was completely busted. Doing the two in separate commits
is unfortunately not possible as the old testcase.prf logic
was so broken it would barf if only looked at.
Change-Id: Ibf21216195c760ee46ae679c162b207b77a9d813
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Allows us to have scoped variables such as eg FOO[arch=armv7].
We could quote all variables, but Xcode doesn't, and we try to stay
close to the native behavior.
Change-Id: Ia6634a33e42031fe7e69c4f680803fa347e5de4a
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
A bunch of empty and never-to-be-used directories makes the build tree
noisy and harder to navigate.
Change-Id: Iebef91c82d58a8d6a0047fb5439d50eb6806f557
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
There was a mismatch of how we sanitized paths for dependencies of the
target and how those dependencies were sanitized (or not sanitized),
resulting in the target depending on 'some/path/foo.o' while the
extra compiler target was named 'some/path//foo.o', with an extra
slash. This confused 'make' enough to decide that it didn't know
how to build the dependencies for the target.
Change-Id: I181b86c291286cbbbb1f7b4c3b929a5f1dc163a3
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The pattern ${QMAKE_ needs to be at the beginning of the line, or not
start with a $ (which would make it a regular qmake variable).
Also, it's fine that the variable is of the QMAKE_VAR_foo type, as
these variables are resolved at generator time, but are constant
and do not depend on the inputs. This means we have to replace
extra variables in the output.
Change-Id: I21ad24ae770f2137e2d5d92a20ee54e2f3f4ca06
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Platform specific qmakespec needs to enable: autogen_wmappmanifest and winphone. Manifest will be generated once and only for the application template.
The Manifest will generated from following variables:
* PRODUCTID - the GUID (application specific)
* PUBLISHERID - GUID (publisher specific)
* TARGET - short application name (executable)
* AUTHOR
* PUBLISHER
* DESCRIPTION - application description
Change-Id: I225c24dc256c57451775e37658080e88b842a7d8
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The user needs to specify the DEPLOYMENT variable. The syntax
is the same as previously used for DEPLOYMENT. For more info
please refer to the qmake documentation. The change adds
a new itemgroup, "Deployment Files". All files in this
itemgroup are marked as DeploymentContent and are then
packaged with the application either as XAP or the WinRT
specific file format.
Change-Id: Icf85887287c1c97eb782704340eaa3f8dde6719e
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
In order to be able to use the linker's /WINMD
and /WINMDFILE options
Change-Id: I2673e20aa073c6b807e8c9f191fd408c7976efc4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The change adds a new ItemGroup with a single library reference:
platform.winmd.
Change-Id: I0c7f4c46654b520afb79b6c6f49b5f2d1af400d3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
It's a generic way to configure the Visual Studio Solution
architecture. It's added to support different project
architectures, ARM specifically. It may be a good idea
to replace the Win32 and x64 with VCPROJ_ARCH=Win32
and VCPROJ_ARCH=x64 defined in corresponding qmakespecs.
Change-Id: I9b23f7393bf248a629c425187d6dd8859092c45c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
qmakespec for either WinRT or WinPhone have to specify
QMAKE_PLATFORM with winrt and/or winphone.
Change-Id: I87e0063881e6edd65de14adb006949247ce49904
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The Xcode generator relies on the generic makefile generator for extra
compilers such as qrc and moc, by generating makefiles that are then
executed as separate build steps in the Xcode build.
These makefiles are generated by entering a special mode in the Xcode
generator, in which case we _do_ want to resolve dependencies, so that
e.g. the files referenced inside a qrc file are added as dependencies
to the makefile rule that generates the qrc-cpp file.
Change-Id: I96bdcb165e9774a6328ae1980986fa2c6b00c6d9
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
When building a project in VS then it would cause a rebuild
under certain situations even though a rebuild is not
actually required.
The root problem exists in VS in the following configuration:
1. A file has a custom build tool specified
2. The custom build tool has additional dependencies
3. The input file is specified in the additional dependencies
4. There are files in the additional dependency list
This is the situation with form files in Qt that have include hints
specified in Qt Designer. The include hints get specified in the
additional dependencies for the custom build tool.
What happens is that VS will process files in the additional
dependency list differently based on where they appear in the list
relative to the input file.
If a dependency appears before the input file, VS will require the
file as a build input. If you just specify a file name, VS looks in
the project directory (and only the project directory) for that file.
You have to specify the path (relative or absolute) to get VS to look
elsewhere. If VS does not find the dependency, VS thinks the project
is out of date (since the missing dependency is a required build
input) and will rebuild the input file.
If the dependency appears after the input file and the file doesn't
exist, VS does not include the dependency as a build input. Since the
file is not a build input, no rebuild is required.
Change-Id: I5af460d21ad049ed7819746fd60c98677b810692
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
as a side effect, this fixes the generators that were more bitrotted
(nmake and even more mingw).
Task-number: QTBUG-30644 #close
Change-Id: Iefa3f07125884412d091aa12b44935e5b1fb858a
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
That's not been in use for quite a while.
Change-Id: If5a18a54d32f330fe37655516d4b83e5d3d30afc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We just need one digest algorithm, any algorithm, to generate a
somewhat unique identifier. SHA-1 will suffice.
Change-Id: I3cb26bf866d616df3ef32feace10934f19daa1a6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Set the SONAME to the library name without the major
version number appended, as android does not have the versioned
symlinks.
Change-Id: I41c504869019a393a3f112b2f7fc81c7ad5afa1c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: BogDan Vatra <bogdan@kde.org>
... as that causes debug+release installs to overwrite each other's
postprocessed files.
introduces CONFIG+=sliced_bundle, which instructs qmake to create
file-by-file install commands. we don't know whether people are not
putting files outside qmake's knowledge into the bundle build dir, so
this mode is not necessarily backwards-compatible, and thus off by
default.
Task-number: QTBUG-28336
Change-Id: I23e90985ccd3311f0237ed61aadca6d7ed8325b7
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
by convention, $target.framework/$target links to
Versions/Current/$target, not Versions/$version/$target.
Versions/Current already links to $version.
so this adds one indirection, but is otherwise the same.
Change-Id: If3d1a3713712f4221ec31883977e50bce6f91764
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this went unnoticed so far, because the mac qmakespecs don't define a
strip command to start with.
Change-Id: Iac3e7ffa6f400373552134a44b9713aaf5f44589
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
replace() doesn't detach if there is nothing to do.
Change-Id: I845b585c766f44a670ca3af1fc11ba03e7317622
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
qmake has the rather bizarre logic that QMAKE_LIBS* is escaped rather
early (instead of right before being written out the the Makefile).
consequently, we need to explicitly escape the paths from the prl files
as well.
Task-number: QTBUG-32326
Change-Id: Ieaf81113d3ca3cf5d8a1ef87c83c5721d6b473ee
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
escape backslashes before the quotes, as otherwise we'd escape the
backslashes we just used to escape the quotes.
Change-Id: I88e12c0c2cfc53e0ab8dce9807b06dfce6aa6e78
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
... as that is the CWD of the command (since b139e7e96e5c).
leave the resolution relative to $$PWD as a fallback with a warning.
Investigated-by: Harald Hvaal <hhvaal@cisco.com>
Task-number: QTBUG-19352
Change-Id: I75de9444a647cd9e6f509e3d8eb3382dc985e5ca
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Scripts are available in internal mkdist repo.
Added license tags, updated licenses and copyrights/contacts
Change-Id: Ibc734275f3000987eaa4f5c57f19d4e1fda2c479
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
When defining QMAKE_LFLAGS += /MANIFEST:NO to pro file,
it is not written to vcproj in VS2008.
Added MANIFEST:NO generation to vcproj
Task-number: QTBUG-31975
Change-Id: I5f84b30db711bf9c317ca20dc65b207140edb398
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
makes for less visual noise and a tiny bit more efficient code.
Change-Id: I587707fa4e2dc9bead9435bf5caf3a98ab680725
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Add mkspec win32-msvc2013 and make VS 2013 known to configure and
qmake.
Change-Id: I6e63a4d679727a8a3f068f377956185996d72bce
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
We were only fixing QMAKE_C/CXXFLAGS, not the defines we then appended.
Change-Id: Iaa4a394738658c45aae83941ebe54470d6d8e250
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
If both the rc_file and res_file was added to the project then in MSVC
2012 it would cause an error complaining of a duplicated resource.
Task-number: QTBUG-29826
Change-Id: Ib3401b423208cd8c90895038c9cbadd80c39b542
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The removal of embed_manifest_dll or embed_manifest_exe from CONFIG
now disables the embedding of manifests in VS project files.
Task-number: QTBUG-5301
Change-Id: I031318883edca6f9b63a7981ef6c44e3f123f6fd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
For vcproj files we should not automatically add a dependency for extra
compilers as this should be done via the depends variable for the extra
compiler instead.
This fixes a problem where something like '@echo command' was used in the
command as it would depend on echo and not the actual command anyway.
Change-Id: I7c0aa0d62143aa39c518e8bce65f302afdba33c9
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This reverts an earlier change that tried to fix the relationship between
Qt's concept of output directories with what Xcode expects, but it broke
DESTDIR. The relationship between Qt and Xcode is still a mess, but at
least DESTDIR now works.
Change-Id: I44f056d48c87359a609e0337da266120ba4eb155
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
The PlatformToolSet tag belongs into the PropertyGroup with the label
"Configuration". The former location in an anonymous PropertyGroup
tricked Visual Studio into displaying the right PlatformToolSet but
using its default value. If VS 2010 and VS 2012 are freshly installed
on the same machine, the default toolset for VS 2012 is VS 2010.
Task-number: QTBUG-30822
Change-Id: If00a532e92b0812c552b1cac52ff77a1e7039146
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
/RTCsu and /RTCus must be handled as full runtime check options.
Task-number: QTBUG-30711
Change-Id: I783bf49f2ab1d4fd9636dca8e434bccb54844c8c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The vcxproj format supports the /we compiler switch as
TreatSpecificWarningsAsErrors tag.
Support for this switch got lost during refactoring of the
vc(x)proj generators for Qt 4.8.0.
Task-number: QTBUG-29098
Change-Id: I607e907dcb9c1bc7d261053b6d757941ec7db822
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Fix passing of preprocessor definitions with double quotes to the
resource compiler and to MIDL. Both have a different escaping mechanism
then the C/C++ compiler tool. This fixes a regression introduced in
9e9911715c.
Task-number: QTBUG-30859
Change-Id: Ifa041df407030320847373a5964a547c39dd5439
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
These timestamps were useless and broken on non-ascii locales.
Change-Id: Iad08eb0f5dfd5e86f6451d6572365d0c080e6115
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
On iOS the compiler expects archs like armv6, armv7, armv7s when passed the
-arch flag, or when the ARCHS Xcode variable is set. Instead of mangling
QT_ARCH, which is used other places and assumed to match the values
provided by the arch.test, we use our own variable.
Change-Id: I05e10be8d69dd4d7cbcef04640fef99f1efb253d
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Both the /NXCOMPAT and /DYNAMICBASE options were handled by qmake but
never written to the vcxproj file even if they were set in the pro file.
Change-Id: I4ca26fb312648944c25d3a24cdc8c640c9de619d
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
If mingw32-make.exe encounters a backslash as the last character
on a line it interprets this as signifying line continuation.
When building Android Qt on Windows via cmd.exe, this happens
as backslashes are used on Windows as directory separators.
The workarounds are to make sure that a comment appears directly
after the definition of DESTDIR and that a space ends such
$(MOVE) command lines.
Change-Id: I7f93b655e004edaadac41d0d96bca23e1ba3a85c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
In ebc4fb45 all NDEBUG defines were removed from DEFINES to adjust the
nmake generator's behavior to the vcproj generator.
Turns out that the vcproj generator did it wrong.
The user must be able to specify NDEBUG in DEFINES.
Change-Id: Iaaf3915ac79acbbd1e7a3172ad3951d0d686041b
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Split $(MOVE) commands up into one per file so that cmd.exe's
builtin move command can be used.
Change-Id: Ife8d7449a2d7718a67082e2d78954964033ce07d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The undocumented feature of linking the library with the highest
version number is more confusing than helpful.
We're changing the default from on to off now.
Users who still need this feature can turn it on with:
CONFIG += link_highest_lib_version
Task-number: QTBUG-15596
Change-Id: Ic998c1685003caa6f57e27dccf83c8b4a2a09553
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This makes it possible to properly parametrize alternative compilers.
Change-Id: Iaf0961c47875ee16d815356f36acf5652577cdca
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
