And remove their uses.
[ChangeLog][QtCore][Deprecation Notice] Deprecated QString::count()
and QByteArray::count() that take no parameters, to avoid confusion
with the algorithm overloads of the same name. They can be replaced
by size() or length() methods.
Change-Id: I6541e3235ab58cf750d89568d66d3b1d9bbd4a04
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Moved to after the header is actually written, not just generated.
For requests with data (put/post) we may have to wait for a callback
before the data to write is available. Since we then delay writing the
header as well it would be disingenuous to emit requestSent().
Pick-to: 6.3
Change-Id: I76c2d40ca48faaa1f6730ce8b3d5a8a4c3156f8f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
It only stores one layer of state, and pausing twice in a row will just
overwrite the previous state. This doesn't happen often but can happen,
especially on Windows if a certificate needs to be looked up in the system
certificate stores (socket gets paused) and then a recoverable error
occurs in QNAM (socket gets paused again).
Fixes: QTBUG-100362
Fixes: QTBUG-63196
Fixes: QTBUG-98476
Pick-to: 6.3 6.2 5.15
Change-Id: Ie524c48e11b6fa8010b78cc1bf3931efe2ce3351
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Task-number: QTBUG-100362
Change-Id: Ib09aec5ea03867163d476a2c92562bc949fc1b1a
Reviewed-by: André de la Rocha <andre.rocha@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
From the API review.
Pick-to: 6.3
Change-Id: Ic05737db79327e7811fcd974a70914b837e06601
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
- process environment/DNS are OFF for INTEGRITY
Task-number: QTBUG-96176
Pick-to: 6.2
Change-Id: I189a97f88c96a428586c31a66b8d250e04482900
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
There's not much context to the URLs being printed, so remove the
message. And suppress the message coming from the MiniHttpServer
Change-Id: Ie2025ac717657ed0f2f0163bd0af22e12a49b30f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The insertions are sorted by when they expire. So, we test the various
orders to insert entries.
Fixes: QTBUG-95959
Change-Id: I1e8d7f4c77dce5eae3d4bfa5101f296c3eea1961
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This introduces a new attribute that allows behavior to keep
the TCP connection(s) to a HTTP1/HTTP2 host longer or shorter
than the default of 120 seconds.
Note that the server might still close the connection earlier.
Fixes: QTBUG-20726
Fixes: QTBUG-91440
Change-Id: I7da64230a78c642c12c0ddbe6b678cf17c3aafde
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It's the user's privilege to do so when they want to finish reading the
QIODevice. Moreover, this is the only difference between close() and
disconnectFromServer().
[ChangeLog][QtNetwork][Important Behavior Changes] The Windows
implementation of QLocalSocket::disconnectFromServer() no longer calls
close(), which is consistent with the behavior on Unix.
Change-Id: Ie9ce20c60259a2b08f5254b719355bd7be9b17cd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
These signals allow monitoring where in the HTTP1/HTTP2
flow a request is currently in.
Fixes: QTBUG-71698
Fixes: QTBUG-18766
Change-Id: Icc2fe435afc9f680fa7a76c32731e25fcdfeb4b4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
To (set)decompressedSafetyCheckThreshold, as suggested on the API review.
Task-number: QTBUG-94407
Change-Id: Iffc52691022939ae46703de8a0416355487b716f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Rather than when the data is received. Source compatibility is
achieved through double-decompressing the data. This lets us know
how many bytes are available just as before but without having the
uncompressed data left in memory.
Fixes: QTBUG-83269
Change-Id: I352bd09581614c582e4628243e2a0e895ba4946b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The error that the actual runtime will encounter, and not the one that compile-time
ifdefs will (potentially) erroneously select.
Change-Id: I8ef4c34bcb8b3e568bc39f8c8ea6bfb7732f9e27
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It's possible that Qt is built with OpenSSL and some other backend.
The ifdefs generated are not mutually exclusive anymore, as it was
in the past. So tests should rely on the actual backend they have
working at runtime.
In the process of fixing the auto-tests, modernized feature #if-ery and
some associated compilation issues.
Fixes: QTBUG-92875
Change-Id: I2be1b924d506fd36dc4e2c6c9158b5023ff87f32
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The BASE argument of qt_add_resources now denotes the root point of the
alias of the file. Before, BASE was merely prepended to every file that
got passed to qt_add_resources.
Old behavior:
qt_add_resources(app "images"
PREFIX "/"
BASE "../shared"
FILES "images/button.png")
Alias is "../shared/images/button.png", and pro2cmake generated
QT_RESOURCE_ALIAS assignments to fix this.
New behavior:
qt_add_resources(app "images"
PREFIX "/"
BASE "../shared"
FILES "../shared/images/button.png")
The alias is "images/button.png". No extra QT_RESOURCE_ALIAS assignment
is needed.
The new behavior is in effect for user projects and for Qt repositories
that define QT_USE_FIXED_QT_ADD_RESOURCE_BASE. Qt repositories will be
ported one by one to this new behavior. Then the old code path can be
removed.
Pick-to: 6.1
Task-number: QTBUG-86726
Change-Id: Ib895edd4df8e97b54badadd9a1c34408beff131f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Already blacklisted on the other linux versions, but is failing on
SLES now in 5.15
Pick-to: 6.1 5.15
Change-Id: I267908adf94ede51e5520aa2cb806b394fb0438e
Reviewed-by: Tarja Sundqvist <tarja.sundqvist@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The qt_ForceTlsSecurityLevel symbol is not defined if SSL is not configured,
so don't use it in the QNetworkReply test if it's not.
Change-Id: Id3110a1997fea1648b48bfc411e90e7efe306678
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
All TLS (and non-TLS) backends that QSsl classes rely
on are now in plugins/tls (as openssl, securetransport,
schannel and certonly plugins).
For now, I have to disable some tests that were using OpenSSL
calls - this to be refactored/re-thought. These include:
qsslsocket auto-test (test-case where we work with private keys),
qsslkey auto-test (similar to qsslsocket - test-case working with
keys using OpenSSL calls).
qasn1element moved to plugins too, so its auto-test have to
be re-thought.
Since now we can have more than one working TLS-backend on a given
platform, the presence of OpenSSL also means I force this backend
as active before running tests, to make sure features implemented
only in OpenSSL-backend are tested.
OCSP auto test is disabled for now, since it heavily relies on
OpenSSL symbols (to be refactored).
[ChangeLog][QtNetwork][QSslSocket] QSslSocket by default prefers 'openssl' backend
if it is available.
[ChangeLog][QtNetwork][QSslSocket] TLS-backends are not mutually exclusive anymore,
depending on a platform, more than one TLS backend can be built. E.g., configuring
Qt with -openssl does not prevent SecureTransport or Schannel plugin from being
built.
Fixes: QTBUG-91928
Change-Id: I4c05e32f10179066bee3a518bdfdd6c4b15320c3
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Those serve no purpose anymore, now that the .pro files are gone.
Task-number: QTBUG-88742
Change-Id: I39943327b8c9871785b58e9973e4e7602371793e
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Remove the qmake project files for most of Qt.
Leave the qmake project files for examples, because we still test those
in the CI to ensure qmake does not regress.
Also leave the qmake project files for utils and other minor parts that
lack CMake project files.
Task-number: QTBUG-88742
Change-Id: I6cdf059e6204816f617f9624f3ea9822703f73cc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Complete search and replace of QtTest and QtTest/QtTest with QTest, as
QtTest includes the whole module. Replace all such instances with
correct header includes. See Jira task for more discussion.
Fixes: QTBUG-88831
Change-Id: I981cfae18a1cabcabcabee376016b086d9d01f44
Pick-to: 6.0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Looking at grafana it rarely fails in dev so unblacklisting it.
Though it is a little more flaky after switching to http 2 by default
because then we only have one channel and more requests end up queued in
the same channel, which will get errored out when the server
disconnects.
Task-number: QTBUG-88943
Change-Id: If5d6335864ce6bbc35f519b2c6d7068e4181afd2
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
headFromHttp hasn't been flaky since 5.14 times according to grafana,
does not fail locally.
Same situation with ioHttpRedirect as above.
ioHttpRedirectMultipartPost has not failed on Windows since october
2019, assumed stable now.
backgroundRequestInterruption no longer exists.
ioPostToHttpFromSocket would fail in debug MSVC builds but was
fixed in 710886fbdd.
Task-number: QTBUG-88943
Change-Id: Ida640179ef15a3452291745e4e94a71a385f57ae
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The test in general is fine, but it was making an assumption that the
first 5 readyRead emissions would never result in the whole message
being received. In certain scenarios with slowdown however it was still
possible that we would receive the whole message after just a few
readyReady emissions. While I didn't check it's most likely due to a
mechanic in the QNetworkReply machinery where we suppress some
emissions if we know there's more data just about to be available.
Task-number: QTBUG-88943
Change-Id: I0cf06edb34d4e86cc8a42c0f1cd7e8c35765f6ee
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Which contains a lot of 'macos'/'osx' black-listed auto-tests. They
mostly fail with SecureTransport (on BigSur) because SecTrustEvaluate()
does not like our old certificate. Instead, since SecureTransport
is deprecated anyway and we are not planning to develop it in future,
skip the related auto-test depending on QT_CONFIG(securetransport).
Task-number: QTBUG-88943
Change-Id: I5f6cb7b2d0ea15c445603c1ff3e1700f123c28d1
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It was blacklisted due to the issue there. The issue is resolved, but
the blacklist stayed.
Task-number: QTBUG-88943
Change-Id: I7d9a660a17c1463dd8b654752ed5787fe5f5af24
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The requests will remove themselves once they get deleted
but since the deletion is done through a _queued_ invokeMethod
to 'deleteLater' we will call
QHttpNetworkConnection::_q_startNextRequest first which may
end up starting a reconnect of the TCP socket which we had the error on.
In this specific instance it manifested as a race condition where we
either don't get a proxyAuthorizationRequired signal at all (it was
emitted while we didn't have any valid replies), or we get the signal
emitted too late and it gets emitted on whatever the next reply was.
Task-number: QTBUG-88417
Pick-to: 5.15 6.0
Change-Id: If3f8ececc5550f1868c90124559cb8e3029646d8
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The test authenticationCacheAfterCancel was the only one to fail
in recent COIN runs. This patch blacklists it on Ubuntu 20.04.
Task-number: QTBUG-88417
Change-Id: Idc85499da82336d291d9a90ecb941810a0e6c935
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This time based on grepping to also include documentation, tests and
examples previously missed by the automatic tool.
Change-Id: Ied1703f4bcc470fbc275f759ed5b7c588a5c4e9f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Modify special case locations to use the new API as well.
Clean up some stale .prev files that are not needed anymore.
Clean up some project files that are not used anymore.
Task-number: QTBUG-86815
Change-Id: I9947da921f98686023c6bb053dfcc101851276b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
To avoid potential decompression bombs. This is implemented with just
a simple check that the ratio doesn't pass some hardcoded preset.
Change-Id: I17246f0f43e73280cdb35a8f03d65885f5678ad6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
qt_add_test supports now QT_TEST_SERVER_LIST, which will add the test
servers as docker test fixtures.
The docker server will be started before the test is run, and stopped
after the test is run.
Running the tests in parallel is not supported.
Docker tests are currently only supported on Linux hosts.
Task-number: QTBUG-85034
Change-Id: If3cefe05c5dec19c14b05d2fa8b01a0b6d95e259
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
CentOS it seems not only backported some OpenSSL 3 functions,
but also raised the default security level to 2, making some of
our keys (and MDs?) 'too weak' and failing auto-tests here and
there as a result. For our auto-test we lower the level to 1,
as it is expected to be.
Fixes: QTBUG-86336
Pick-to: 5.15
Change-Id: I7062a1b292e8b60eb9c2b2e82bd002f09f9da603
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Our authentication code is race-y by design:
1. When two requests are fired off and queued at the same time in the
same QHttpNetworkConnection then if one of them encounters
"authentication required" then it will copy whatever credentials it got
to all the other channels in the connection. This is likely what the
first part of the test is testing.
2. If a later request is fired off and it includes credentials in the
url then the newly included credentials should be used instead of the
cached ones.
The race here can occurr when one socket either takes too long to
connect or the connected signal is not received early enough. Then the
first socket is used for both requests and then we can hit case #2 when
the url contains credentials.
Pick-to: 5.15
Change-Id: I646a5378d8c1256b2de98b51912953df29f68cb2
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Remove around 1000 compiler warnings about missing overrides
in our auto tests.
This significantly reduce the compiler warning noise in our auto
tests, so that one can actually better see the real problems
inbetween.
Change-Id: Id0c04dba43fcaf55d8cd2b5c6697358857c31bf9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
While we initially wanted to just disable the functionality the way it
is currently built forces people to do a full build of Qt just to enable
it. Instead of doing this half-measure let's just remove the code
completely from QtBase and rather prepare QtNetwork to handle being a
plugin that can be compiled at any time.
Task-number: QTBUG-80340
Change-Id: I19155c8c167cf932088f01b2a9706d0e7ab792d1
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
HTTP/2 is only used initially before it transitions to using HTTP/1.1,
and in this case the amount of connections established should also
reach 6.
Change-Id: I300e171e46c846df1730c07469ea85a51cecfb63
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Also take this opportunity to reshuffle the content-encodings in the
intended ordering since the ordering is used to signify priority.
Task-number: QTBUG-83269
Change-Id: I022eecf1ba03b54dbd9c98a9d63d05fb05fd2124
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Not following redirects is not a feature, but just a hastle for everyone.
The main issue with switching this default is that applications that
actually do manual redirect handling will break in various ways.
FollowRedirectsAttribute was removed as it no longer serves any
purpose beyond duplicating the default value.
[ChangeLog][Network] QNetworkAccessManager now follows redirects by
default with the NoLessSafeRedirectPolicy.
[ChangeLog][Potentially Source-Incompatible Changes]
QNetworkRequest::FollowRedirectsAttribute was removed and has been
superseded by QNetworkRequest::RedirectsPolicyAttribute
Fixes: QTBUG-85901
Change-Id: Ic5b776180a4b84ac4fc895158bb5a66a3c91a042
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Use pro2cmake with '--api-version 2' to force regenerate
projects to use the new prefixed qt_foo APIs.
Change-Id: I055c4837860319e93aaa6b09d646dda4fc2a4069
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The change creates a slight source incompatibility. The main
things to take care of are
* code using printf statements on list.size(). Using qsizetype in
printf statements will always require a cast to work on both 32
and 64 bit.
* A few places where overloads now get ambiguous. One example is
QRandomGenerator::bounded() that has overloads for int, uint and
double, but not int64.
* Streaming list.size() to a QDataStream will change the format
depending on the architecture.
[ChangeLog][QtCore][QList] QList now uses qsizetype to index into
elements.
Change-Id: Iaff562a4d072b97f458417b670f95971bd47cbc6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
