When a new model is set, a valid index is selected. When a model is
reset, this is not the case which is slightly inconsistent. Fix it by
using the same logic to find a valid index when the model is reset
Fixes: QTBUG-80998
Change-Id: I6c167511e199a6664343cf1dc3bcd27c65389bfd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
If available, use a C++17 std::pmr::unordered_set with a monotonic
buffer resource and a 256-byte stack buffer to avoid the per-element
allocations of QSet.
Results on my machine:
RESULT : tst_QStringList::removeDuplicates():"empty":
- 0.00014 msecs per iteration (total: 74, iterations: 524288)
+ 0.000031 msecs per iteration (total: 66, iterations: 2097152)
RESULT : tst_QStringList::removeDuplicates():"short-dup-0.00":
- 0.00043 msecs per iteration (total: 57, iterations: 131072)
+ 0.00013 msecs per iteration (total: 69, iterations: 524288)
RESULT : tst_QStringList::removeDuplicates():"short-dup-0.50":
- 0.00049 msecs per iteration (total: 65, iterations: 131072)
+ 0.00032 msecs per iteration (total: 85, iterations: 262144)
RESULT : tst_QStringList::removeDuplicates():"short-dup-0.66":
- 0.00057 msecs per iteration (total: 75, iterations: 131072)
+ 0.00039 msecs per iteration (total: 52, iterations: 131072)
RESULT : tst_QStringList::removeDuplicates():"short-dup-0.75":
- 0.00064 msecs per iteration (total: 85, iterations: 131072)
+ 0.00048 msecs per iteration (total: 63, iterations: 131072)
RESULT : tst_QStringList::removeDuplicates():"long-dup-0.00":
- 0.083 msecs per iteration (total: 85, iterations: 1024)
+ 0.039 msecs per iteration (total: 80, iterations: 2048)
RESULT : tst_QStringList::removeDuplicates():"long-dup-0.50":
- 0.11 msecs per iteration (total: 58, iterations: 512)
+ 0.078 msecs per iteration (total: 80, iterations: 1024)
RESULT : tst_QStringList::removeDuplicates():"long-dup-0.66":
- 0.13 msecs per iteration (total: 70, iterations: 512)
+ 0.10 msecs per iteration (total: 53, iterations: 512)
RESULT : tst_QStringList::removeDuplicates():"long-dup-0.75":
- 0.16 msecs per iteration (total: 86, iterations: 512)
+ 0.13 msecs per iteration (total: 69, iterations: 512)
When interpreting the data, take into account that each iteration
contains _also_ a deep copy of the QStringList d/t the detach from
'input'.
The pattern is used elsewhere in Qt, so I've put the class that
implements the seen set into a private header file and used in some
other places I found.
Change-Id: I1f71a82008a16d5a3818f91f290ade21d837805e
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
When the tested widget has a focus proxy, then we should check if the
current focus widget is not the same as that focus proxy before setting
it to be the widget that gets focus. This ensures that when back-tabbing
from a widget like QDoubleSpinBox that it will not get stuck inside that
widget and will back-tab to the next correct one.
Fixes: QTBUG-81097
Change-Id: I3f689c7715da7f3ce8c3d2f616041528f5778a2f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
When closing a popup (submenu) triggers closing another popup (the menu)
programatically it can happen that QApplicationPrivate::popupWidgets is
destroyed. Therefore we have to check if popupWidgets is still valid
after the focus change event was delivered.
Fixes: QTBUG-81222
Change-Id: Ide3a6897e43f389d396a80d8b158f7c8eb04e3aa
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
There's no point at keep raising errors after encountering the
first malformed attribute.
Change-Id: Idb37e577ea96c3bd850b3caf008fe3ecd57dd32e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is meant to correspond to required properties in QML.
Change-Id: I2645981e13f7423bc86b48370c165b3cfe2aaa62
Task-number: QTBUG-81561
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
If support for regular expression is disabled, fixed string can
still be used.
[ChangeLog][QtCore][QSslCertificate] Add overload of fromPath that does
not make use of QRegExp and deprecate the QRegExp variant.
Task-number: QTBUG-72587
Change-Id: I507d8941cc7d70166da0948375dc421fe5e7d967
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
They are now version 4, which is hopefully the final format,
relying on nothing but QDataStream.
Except for the qshader autotest which tests all the 1..4 versions
and so needs appropriate test data.
Also unifies the batch file naming.
Change-Id: Iec478be86d14dbec7ffb9d5f9b62c14fca5d7c9e
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
We don't know which versions these blacklistings actually apply on
unless we actually get macOS 10.14 and 10.15 into the CI and running
tests, so let's start with that, and then granularize the blacklists
after that.
Task-number: QTBUG-75786
Change-Id: Id79642afa50cb20efa2cd209286b6933918d3a4a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
During 556712f511 a small regression was
introduced which set a wrong value for QStyleOptionTab::position.
Fixes: QTBUG-81393
Change-Id: Ie8c66186b1b79c97bf77c7b139e08840233b7b66
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Same as other versions of MSVC
Fixes: QTBUG-80328
Change-Id: I05c5ffe6d36e0cdfb781080a736c90b6a6d4b2ba
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
[ChangeLog][QtCore][QResource] Added uncompressedSize() and
uncompressedData(), which will perform any required decompression on the
data, prior to returning (unlike data() and size()).
Change-Id: Ief874765cd7b43798de3fffd15aa053bc505dcb1
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
They overlapped and the latter had duplicated code, so make them into
a single data-driven test. At the same time, replace the '-' at the
start of the expected string with QLocale::negativeSign(), since the
test fails otherwise when LC_NUMERIC=nb_NO on Linux (Debian/testing).
Change-Id: I051c75abff16b2e6f8278fcb152b6bde14c71f9a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test expects a very explicit list of events during show, but on
macOS we also get an InputMethodQuery event as a result of the window
becoming active. The test needs to be written significantly to support
these kind of platform differences.
Change-Id: I395c1e9e4e9baf7d9f88f0d067586fc15afb9a16
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
For some reason the firstChild gets the focus when clearing the focus.
This seems to be timing dependent, as removing the 30ms qWait 'fixes'
the issue. So does a processEvent call before minimzing. Both of these
require further investigation.
Change-Id: I62833a5541712f97dc24bc63384fa4c051096537
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
There's a timing issue that affects the position of the vertical
scrollbar when scrolling by pixels.
Change-Id: I29d73574785be539a5870b498a902b1aba887e9c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
It's not clear why this is failing, but we need to blacklist it so that
we can move over to testing macOS 10.14 and 10.15 in the CI.
Task-number: QTBUG-75786
Change-Id: I208d5af92406c5da8d0210e0188568466b78b2a9
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The combobox popup can overlap a little with the button, and that's the
expected behavior.
Change-Id: I245bfce85cb5ee661ceb51dbe0d844492878a2bc
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
We were being inconsistent in how we handled this, some tests skipping
while others using QVERIFY. It makes more sense to skip the tests, since
the problem is a missing pre-condition of the test, not the test itself
being bad or exposing real failures in the implementation.
Change-Id: I20eacfe12dbce0b0d926e48cbe2d2772819fa4a5
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The logic is now mostly handled in QGuiApplication, with QApplication
only dealing with the widget-specific palettes and interaction between
the style and the palette.
The application now picks up changes to the platform theme and will
re-resolve the current application palette appropriately. This also
works even if an explicit application palette has been set, in which
case any missing roles are filled in by the theme.
The palette can now also be reset back to the default application
palette that's fully based on the theme, by passing in the default
constructed palette (or any palette that doesn't have any roles set).
This is also correctly reflected in the Qt::AA_SetPalette attribute.
Conceptually this means QGuiApplication and QApplication follow the
same behavior as QWidget, where the palette falls back to a base or
inherited palette for roles that are not set, in this case the theme.
Behavior-wise this means that the default application palette of the
application does not have any roles set, but clients should not have
relied on this, nor does QWidget rely on that internally.
It also means that setting a palette on the application and then
getting it back again will not produce the same palette as set,
since the palette was resolved against the theme in the meantime.
This is the same behavior as for QWidget, and although it's a
behavior change it's one towards a more sane behavior, so we
accept it.
[ChangeLog] Application palettes are now resolved against the platform's
theme palette, the same way widget palettes are resolved against their
parents, and the application palette. This means the application palette
reflected through QGuiApplication::palette() may not be exactly the same
palette as set via QGuiApplication::setPalette().
Change-Id: I76b99fcd27285e564899548349aa2a5713e5965d
Reviewed-by: Vitaly Fanaskov <vitaly.fanaskov@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
...but keep support for deserializing for all older versions in order to play
nice with existing .qsb files.
The usage of binary JSON and then CBOR is a historical artifact: relying
on the QJsonDocument (which we generate for purposes unrelated to binary
serialization) was a convenient shortcut. However, writing to and
reading from a QDataStream instead (which QShader already does) is trivial.
In order not to be limited by potential CBOR requirements in the future,
take it all into our own hands.
Extend the qshader autotest accordingly.
Task-number: QTBUG-81298
Change-Id: If0047b659bd6601ca47b5bbbce1b719630cde01e
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
What's more, demonstrate two types of rendering to a cubemap:
one by one to each face, and by attaching all faces as color
attachments in one go.
Both are used by Qt Quick 3D in connection with shadows, so this
proves that the same is possible to implement with QRhi.
Task-number: QTBUG-81261
Change-Id: I5c7077224d7cae0dd6ea02ac30a9e6f9f1f0c229
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Uses the two compute shaders from Qt Quick 3D. Demonstrates
and tests both RGBA16F textures and using them (and doing
load/store with mip levels individually) in combination with
compute.
Task-number: QTBUG-81213
Change-Id: I3f0f250d5997a26c857b7c45517684c63b44e58e
Reviewed-by: Johan Helsing <johan.helsing@qt.io>
An empty QTextDocument already contains a block; so when the formatting
is fully determined, if the document is still empty, then instead of
inserting a new block, we can set formatting on the cursor, which
affects the pre-existing block, before inserting text. This avoids
leaving a blank line (the default block) above the inserted content.
Fixes: QTBUG-81060
Change-Id: I14e45e300a602493aa59680417d74d4c2b25862d
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Use QStringIterator rather than indexed loops. This fixes handling of
non-BMP code points (which may be lower or uppercase, see the test).
Change also the semantics of the functions, adopting Unicode §3.13
definitions: a string is lowercase/uppercase if it's equal to its
own toLower/toUpper folding.
As a side effect, empty strings are now correctly reported to be
lowercase AND uppercase.
[ChangeLog][Important Behavior Changes] The semantics of
QString::isLower() and QString::isUpper() have been changed to match the
Unicode specification. Now lowercase (resp. uppercase) strings are
allowed to contain any character; a string is considered lowercase
(resp. uppercase) if it's equal to its own toLower() (resp. toUpper())
folding. Previously, a non-letter character would make the string not
lowercase nor uppercase, and the mere presence of an uppercase (resp.
lowercase) letter would make isLower() (resp. isUpper()) return false,
even if the letter wouldn't change under case folding. As a
consequence, now empty strings are lowercase and uppercase.
[ChangeLog][QtCore][QString] Fixed a number of bugs of
QString::isLower() and QString::isUpper(). Empty strings are now
correctly reported to be lowercase (resp. uppercase), and strings
containing code points outside the BMP are now correctly handled.
Note that the behavior of these functions has also been changed.
Change-Id: Iba1398279a072399a9f21295fe75f6e414f3f813
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
To disambiguate &QSslSocket::sslErrors() expression. Add a new
getter - sslHandshakeErrors().
[ChangeLog][Deprecation Notice] QSslSocket::sslErrors() (the getter) was deprecated and superseded by sslHandshakeErrors()
Task-number: QTBUG-80369
Change-Id: I9dcca3c8499800c122db230753dc19b07654f8a2
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QLocalSocket::error is overloaded as a signal and an accessor (for the
error reported by the signal). This means connecting to the signal using
a pointer to member function would require ambiguity resolution. We
deprecate the old accessor (to be removed in Qt 6) and introduce a new one -
'socketError'.
[ChangeLog][Deprecation Notice] QLocalSocket::error() (the getter) is deprecated; superseded by socketError().
Task-number: QTBUG-80369
Change-Id: Iab346f7b4cd1024dee9e5ef71b4b7e09f6d95b12
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The one that is a getter for the last error found. This is to disambiguate
the expression '&QAbstractSocket::error'. Introduce a new member-function
socketError as a replacement.
[ChangeLog][Deprecation Notice] QAbstractSocket::error() (the getter) is deprecated; superseded by socketError().
Task-number: QTBUG-80369
Change-Id: Ia2e3d108657aaa7929ab0810babe2ede309740ba
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The windows filesystemwatcher did not watch for attribute changes for
directories (e.g. hidden flag) so it was not in sync with other
backends. Fix it by adding FILE_NOTIFY_CHANGE_ATTRIBUTES to the watch
flags when watching a directory.
[ChangeLog][QtCore][QFileSystemWatcher] Fixed a bug that caused QFSW not
to watch for attribute changes on Windows. Now it will correctly report
when files and directories become hidden or unhidden, for example.
Fixes: QTBUG-80545
Change-Id: I31767a0da899963e3940b4f5b36d1d581e6aa57c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The test was previously tracking all Change events,
which made it fragile.
Change-Id: I17872341237009a9a0a2ad2fd5482f917991d7b2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The actual logging code, qt_message_print(), uses toLocal8Bit(), so
testing by comaring with toUtf8() isn't robust.
Change-Id: I7d6614e4af8c679674dbbf4ff47a88b2b75fc2dc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fix tst_QNoDebug::streaming() to use toLocal8Bit(), to match
QTestLog::ignoreMessage(), which uses fromLocal8Bit().
Change-Id: I65f7b995a582aeab7b7ba61781a229fecd1ed3c3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: David Faure <david.faure@kdab.com>
... in docs, comments, and warnings. Also adopt
some occurrences around there and in the snippets.
Change-Id: Icc0aa0868cadd8ec2270dda794bf83cd7ab84160
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
In the presence of multiple overloads of a function taking either
QString or QStringView, QStringView should always be preferred.
The rationale is that the QStringView overload may have been
added "later" (read: the function was written when QStringView
was not available yet, so it took QString), and the fact that
a function with the _same name_ offers a QStringView overload
implies the function never needed to store/own the string in
the first place.
Add a (compile-time) test for this preference. This is in
preparation for a future QString(char16_t*) constructor
(in Qt 5.15 / Qt 6).
Change-Id: I60a435e494b653548f8f8d52c5d7e7cac2cc875a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Previously, there was only a Python compile test which triggers
only when PySide2 is found. Rename it to pythonCompile().
Extend the TestEntry structure by adding the base line file
and flags, which represent all special cases found in the code.
Check for the presence of a Python base line file in addition
to the C++ one.
Prototypically add one form. Further forms can be added
on the go.
Task-number: PYSIDE-797
Change-Id: Ic2983fa3cab2399a6809e244f93c663e0212f675
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
Deprecated the SAX classes and disabled or replaced their uses in
tests if applicable.
Removed the saxbookmarks example, no point in keeping examples for
the deprecated code.
[ChangeLog][QtXml] SAX classes are now deprecated. Use QXmlStreamReader,
QXmlStreamWriter in QtCore instead.
Task-number: QTBUG-76177
Change-Id: Ic171d62fa0527b0f36f94cf09a69586092269957
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
This amends a1f4321bbb as the font
families should take precedence over the font family set. If the font
family is already included in the families then it should keep its
placement. Otherwise it should be appended.
Task-number: QTBUG-80475
Change-Id: I0049189c88b6879e57619815ec780960e9c0a300
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
In order for SE_TabBarTabText to correctly calculate the space available
for the text it needs to get the rectangle of the tab directly instead
of relying on the option's rectangle as this may have been modified
before this point. Therefore we introduce QStyleOptionTabV4 to be able
to store the index as part of the option so it can be queried directly.
[ChangeLog][QtWidgets] Added QStyleOptionTabV4 as a subclass of
QStyleOptionTab so that the tab's index information can be obtained.
Fixes: QTBUG-50637
Change-Id: If705f5069fdd14eeccf06bc63dba4e8d2e704359
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
oss-fuzz sets the environment variable LIB_FUZZING_ENGINE
to link with AFL or libFuzzer. If this variable is not set,
libFuzzer will be used as before, only that the right qmake
variable will be used for doing so.
Change-Id: If9fe7739a8d2d4a76f4633a75cad3d2e935f3b61
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
It used to be "iterator", causing a qdoc warning:
src/corelib/serialization/qjsonobject.cpp:1405: (qdoc) warning: clang found diagnostics parsing \fn int QJsonObject::const_iterator::operator-(const_iterator other) const
error: out-of-line definition of 'operator-' does not match any declaration in 'QJsonObject::const_iterator'
Add a small test.
Change-Id: Id65effffa720ed1e0fb0ee6937dcc4298f3ef363
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
In Qt6 there is a behavior change with extra stuff after the seconds -
it's no longer allowed and will result in an invalid QTime.
This was introduced with bf65c27789 but
the autotests were not adjusted for it.
Change-Id: Ia78f4f2a8019e46d9d0e8e8b8918a3ab2d4638e2
Reviewed-by: Liang Qi <liang.qi@qt.io>
If a type has both a converter to QVariantList and to
QSequentialIterableImpl registered, we would have chosen the
QSequentialIterableImpl version. In the case of types like QJSValue,
this is more costly. With this change we therefore uses the direct
conversion if it has been registered.
The same applies to QAssociativeIterableImpl and
QVariantHash/QVariantMap.
Change-Id: I9c0b5068efe4bfbc5e0598a200e6db59201e9974
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
It makes sense for it (instead of triggering the QAbstractItemModel
base class implementation, which doesn't do anything). Safe to override
virtuals in this case -- code calling the old version could not do
anything useful, so at least new code gets those functions properly
implemented for free.
Change-Id: Iefe1ff25e15d877435e93ab28289ad2579616f72
Task-number: QTBUG-48076
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: David Faure <david.faure@kdab.com>
In Qt6 there is a behavior change with extra stuff after the seconds -
it's no longer allowed and will result in an invalid QDateTime.
This was introduced with bf65c27789 but
the autotests were not adjusted for it.
Change-Id: Iee6a9a7ac6cbb2754a68e082bb7074d17fac9d9c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
If the singular fontFamily() is given, then this is obviously the one to
be preferred over any plural fontFamilies(). Make sure it always ends up
first in the list of emitted font families.
Change-Id: I1e3b1ba29721c8298b1a0d4a1e1da49ba5b4e7ac
Fixes: QTBUG-80475
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Every Qt::CursorShape is supported.
Tested in Chrome, Firefox and Safari.
Change-Id: I38c9024dba4af70af789ac84ad7e38f749c847d7
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
When QLocale::Country is set to QLocale::India numbers are written so that
after first three from the right and then after every second will be comma.
E.g. 10000000 is written as 1,00,00,000
Task-number: QTBUG-24301
Change-Id: Ic06241c127b0af1824104f94f7e2ce6e2058a070
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
Reviewed-by: Teemu Holappa <teemu.holappa@qt.io>
QString(View)s can be built or manipulated in ways that make them
contain/refer to improperly encoded UTF-16 data. Problem is,
we don't have public APIs to check whether a string contains
valid UTF-16. This knowledge is precious if the string is to be fed in
algorithms, regular expressions, etc. that expect validated input
(e.g. QRegularExpression can be faster if it can assume valid UTF-16,
otherwise it has to employ extra checks).
Add a function that does the validation.
[ChangeLog][QtCore][QStringView] Added QStringView::isValidUtf16.
[ChangeLog][QtCore][QString] Added QString::isValidUtf16.
Change-Id: Idd699183f6ec08013046c76c6a5a7c524b6c6fbc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add 2 methods to set/ask if a tab is hidden.
[ChangeLog][QtWidgets][QTabWidget/QTabBar] Tabs can now be
hidden with setTabVisible
Fixes: QTBUG-63038
Change-Id: I7b07ecdb485e1f6c085d03515ef2b73baae889de
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Added new API setDocumentXmpMetadata/documentXmpMetadata and
addFileAttachment
[ChangeLog][QtGui][QPdfWriter] New API to provide external document XMP
metadata and attach files to PDF.
Fixes: QTBUG-78651
Fixes: QTBUG-78764
Change-Id: Ic0b37e8d12899f907001db469080594c14c87655
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
It wasn't tested and behaves in a very particular way.
Change-Id: I60a31681e5b221cf9a86df77e410a76ee4c10864
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
This method should not ignore accessibility objects without
corresponding widget. The widget may have parts with their own
QAccessibilityInterface and these can be also focused.
VoiceOver ignores them if they are not returned by focusChild().
QAccessibleTabBar::focusChild() has been implemented to demonstrate
the concept and make tab titles of QTabBar readable by VoiceOver.
Task-number: QTBUG-78284
Change-Id: Id7c62d86154bbd5d47d6bbee8cb7d05268c2e151
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
QStringListMode::moveRows() had an issue when the destination was before
the source row.
Change-Id: Icf64e5b4cdd6a39faf3ba4ccc3883196b247ccbd
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: David Faure <david.faure@kdab.com>
QListModel::moveRows() had an issue when the destination was before the
source row.
Change-Id: I4ce8b425451f2f53c7eb3b211e9590753dec618a
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: David Faure <david.faure@kdab.com>
This is not to be taken as supported and is still undefined behavior,
but I prefer we do not crash.
Change-Id: Icf4f3398bfd57fcbdc611a5a821a1f2de0838330
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
The previous implementation was *extremely* expensive. It
relied on loading a binary JSON file from resources (which
involved decompressing it), then extracting information out of
it to build a gradient. Already-loaded gradients were kept in
a local cache, which had to be mutex protected.
Instead, this patch extends the gradient generator to build
static arrays filled with the web gradient data, sitting in
.rodata.
These arrays are used when building QGradient objects with a
web gradient. No explicit mutex protection is necessary, since
accesses will just read from the arrays.
As benefits, this patch removes:
* the binary json representation from QtGui's resources (~4KB
compressed, ~50KB uncompressed)
* the overhead of reading from the JSON for each used web
gradient;
* the startup costs of registering the webgradients in the
resources;
* all the overhead of mutex locking when building such
gradients;
* all the runtime memory allocations to load, parse and cache
the web gradients (including the memory + CPU spike on first
load due to the uncompression of the JSON data, as well as a
couple of deep copies).
Change-Id: If5c3d704430df76ce8faf55ee75ebd4639ba09c4
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QItemSelectionModel::columnIntersectsSelection() should honor the parent
according to the docs. For rowIntersectsSelection() this was fixed a
long time ago but columnIntersectsSelection() was forgotten.
Sync the both functions and use range-based for loops as a drive-by.
Fixes: QTBUG-80644
Change-Id: Iaf08f85e2225204d1e6564fa4bb0bc826352ed53
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
When an existing item is replaced with a new one in
QStandardItemModel::setItem() then the persitent index is invalidated
which leads to some unexpected behaviors (like e.g the header size and
resize mode are reset).
Therefore we have to make sure that the invalidation does not happen.
This can be achieved by delaying the call to QStandardItem::setModel()
for the old item until the new is properly added. After this, the old
item no longer gets a valid QModelIndex from the model and therefore
can't invalidate the persistent index anymore.
Fixes: QTBUG-13605
Fixes: QTBUG-73000
Fixes: QTBUG-80586
Change-Id: I4e45e6feb81b7287c0859f638d7ab1a576fc2f0f
Reviewed-by: David Faure <david.faure@kdab.com>
As opposed to unite(), this inserts one map into the other
without duplicating elements.
Task-number: QTBUG-35544
Change-Id: Ie8ab350b29148851a3176cef1007e8a4ca82c273
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This patch fixes the QMetaObject::superClass hierarchy for Q_GADGETs
that inherit from a template which in turn inherits another Q_GADGET.
One common scenario where this is applied is for the CRTP. Without this
patch, moc would stop at the template and then sets the superClass
QMetaObject to a nullptr. For QObjects this works, since there moc knows
that every child must by definition inherit QObject. In order to support
this for Q_GADGETs too, we defer the judgment about the availability
of a staticMetaObject in the base class to compile time through the
existing QtPrivate::MetaObjectForType<Base>::value() helper.
[ChangeLog][QtCore][moc] Moc now correctly sets a non-null
QMetaObject::superClass for Q_GADGETs that inherit from a template which
inherits another Q_GADGET.
Change-Id: I103b5efd74ed24172dffce477ca2ed6d0f374d44
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This flag is used in QSequentialIterable and QAssociativeIterable to indicate
that the data pointer in VariantData should be deleted after the variant has
been constructed.
The use case for this is
https://codereview.qt-project.org/c/qt/qtdeclarative/+/284151, where we have
a proxy iterator and cannot easily return a pointer to already owned data, as
it is hard to manage its lifetime in the iterator. In contrast, it is clear
that we can release the memory in the QSequentialIterable functions, as it has
already been copied into the QVariant there.
Change-Id: I2b33497d991cd4f752153e0ebda767b82e4bb851
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This saves us from having to bootstrap rcc in regular (non-cross)
compilations, as it can now link to QtCore. Actually un-bootstrapping
rcc is left as an exercise for the reader.
This commit discovered that MSVC cannot handle constexpr arrays bigger
than 256 kB, at which point it simply starts claiming that the constant
expressions using it are not constexpr. ICC has a similar problem at
64 kB, but it tells you why ("note: type "const unsigned char [65537]"
too large for constant-expression evaluation").
Note also that this requires gzip or zstd to be in PATH for compression
to happen. RCC linked to zlib, which is always present due to the
bundled copy. gzip's presence is not likely to be a problem on Unix
systems, but could be for Windows users, especially MSVC ones. If gzip
is not present, QtCore's size will increase by about 1910 kB of
read-only (sharable) data.
Change-Id: I2b1955a995ad40f3b89afffd15a3e65a94670242
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
ISO date format doesn't allow spaces within a date, although 3339 does
allow a space to replace the T between date and time. Sixteen tests
added to check this all failed. So clean up the handling of spaces in
the parsing of ISO date-time strings.
[ChangeLog][QtCore][QDateTime] ISO 8601: parsing of dates now requires
a punctuator as separator (it previously allowed any non-digit;
officially only a dash should be allowed) and parsing of date-times no
longer tolerates spaces in the numeric fields: an internal space is
only allowed in an ISO 8601 date-time as replacement for the T between
date and time.
Change-Id: I24d110e71d416ecef74e196d5ee270b59d1bd813
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
even if we are currently inside processEvents (apparently called manually
and not from QEventLoop::exec()). A carefully crafted application
(see, for example, the linked QTBUG or even updated auto-test)
can trigger itself into failing to exit the current (potentially nested)
event loop. We can harden our Cocoa event dispatcher to detect
such condition and properly propagate 'interrupt' to where it'll
do its job, indeed, interrupting the real event loop (aka [NSApp run]).
This mainly means we have to undo what bool blocker would erroneously do.
Also, long live (as people love to say these days) to another tricky
(somewhat) auto-test (surely, it's not flaky!).
Fixes: QTBUG-79477
Change-Id: I794f0cda23e24d36be67f2bb63d52b74be057c31
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The implementation for the X mask would accept any printable
character. Since that includes the blank character, there was no
difference in behavior between the requiring X and optional x: both
would allow the input to be unset, i.e. blank.
This change should be seen in conjunction with the doc improvement
da0af1e.
[ChangeLog][QtWidgets][QLineEdit] Inputmask X character now requires non-blank input.
Fixes: QTBUG-76320
Change-Id: I3e0363e9be5c13373a157cce69c99379615b5829
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Fix some tests in tst_QSqlQuery:
- make sure to use QSql::HighPrecision in tst_QSqlQuery::precision()
(needed for psql)
- remove outdated stuff for mysql 3.x
- psql_bindWithDoubleColonCastOperator: the placeholder are stored as
named placeholders in psql
- avoid some useless old-style casts
Change-Id: I54d29a7e24f17d853cce6baa09a67d9278098810
Reviewed-by: Robert Szefner <robertsz27@interia.pl>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The platform window may create or destroy its surface from other entry
points than the QWidget API, in which case QWidget needs to sync up
its own state to match. In particular WA_WState_Created and the winId
needs to be recomputed.
Fixes: QTBUG-69289
Fixes: QTBUG-77350
Change-Id: I769e58ead3c2efcf8c451c363108848feade9388
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Windows apparently has special code to deal with those addresses. If all
your network interfaces are up and have acquired addresses, then the
link-local network at 169.254.0.0/16 is unreachable. I had never caught
this because both my Windows VM and my bare metal Windows have inactive
interfaces (like the Bluetooth PAN one) and, when inactive, Windows
assigns a link-local address. But in the CI, the interface(s) were all
up and running, causing this issue.
Unix systems don't treat IPv4 link-local any differently, so they always
worked, so long as any interface was up and there had to be one to reach
the network test server.
This commit reworks the test to add test addresses based on the
addresses found on up & running interfaces (see tst_qudpsocket.cpp). For
IPv4, we flip the bits in the local portion of the address. For IPv6, we
add a node with an address I generated randomly (non-universal), with
the same scope.
Fixes: QTBUG-65667
Change-Id: I568dea4813b448fe9ba6fffd15dd9f482db34991
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
In prevision to Qt6 which is going to discourrage the use of the integer id,
add some missing API to the staticless QMetaType API:
- Add a way to construct a QMetaType from a type without calling qMetaTypeId:
QMetaType::fromType<T>()
- Add equality operators
- Add a QMetaType::name() function
- Add a default constructor (by adding a default parameter to the existing ctor)
Change-Id: I95487c1c31bdf0d773717daa9d5452cbced30673
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
In some cases when editing the text (for example when removing the
selected text, or pasting a text block) the text cursor position is
updated, but its visual x position is not updated. This causes the next
cursor movements to start from a wrong position.
Force the update for those cases.
Fixes: QTBUG-78479
Change-Id: Ia496be62beec58660f5e1695e5aafae09c79684e
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Cite RFC 3339 as basis for allowing a space in place of the T, too.
The RFC mentions that ISO 8601 accepts t and z for T and Z, so test
for them case-insensitively. Add a test for this.
Change-Id: Iba700c8d74d485df154d27300aab7b1958e1ccef
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If milliseconds were followed by a space, the space was included in
the count of "digits" read as the fractional part; since we read (up
to) four digits (so that we round correctly if extras are given), a
harmless apce could cause scaling down by too large a power of ten.
Since QString::toInt() ignores leading space, we were also allowing
interior space at the start of the milliseconds, which we should not,
so catch that at the same time. Added tests, including one for the
rounding that's the reason for reading the extra digit, when present.
Fixes: QTBUG-80445
Change-Id: I606b29a94818a101f45c8b59a0f5d1f78893d78f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDateTime is a friend of QTimeZone, so can access its internals; but
it must check the zone is valid before doing so.
Expanded tst_QDateTime::invalid() and made it data-driven to catch the
failure cases.
Commented on a test-case that caught a mistake in my first attempt at
this, and on QDateTimeParser's surprising reliance on a quirk of
QDateTime::toMSecsSinceEpoch()'s behavior.
Fixes: QTBUG-80146
Change-Id: I24856e19ff9bf402152d17d71f83be84e366faad
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
QByteArray::fromBase64 was liberal in its input, simply skipping
over invalid characters. As a side-effect of this, it had
no error reporting, meaning it could not be used to convert
fromBase64 _and_ validate the input in one go.
Add more option flags to make fromBase64 strictly validate
its input. Since we want to know whether it has succeeded
or not, and the existing fromBase64 overloads do not
allow for that, introduce a new function that returns
an optional-like datatype.
While at it: base64 decoding can be done in-place; add an
rvalue overload to enable this use case.
[ChangeLog][QtCore][QByteArray] Added the new fromBase64Encoding
function.
[ChangeLog][QtCore][QByteArray] Added new flags to make
fromBase64 / fromBase64Encoding strictly validate their input,
instead of skipping over invalid characters.
Change-Id: I99cd5f2230f3d62970b28b4cb102913301da6ccd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Turn the Metrics widget into a QTabWidget and add a tab logging
all changed signals of QScreen.
This is useful when for example debugging issues with lock screens and
laptop hibernation.
Task-number: QTBUG-79248
Task-number: QTBUG-76902
Change-Id: Ie86789fe1514cb3333a5f3def7f613f217fa6802
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
When cloning a QTextDocument, the text fragment of the original document
is copied into the new one, which results into copying also the
formatting attributes. However, when the text document is empty, the
corresponding text fragment is also empty, so nothing is copied.
If we want to transfer the formatting attributes for an empty document,
we need to set them explicitly.
Fixes: QTBUG-80399
Change-Id: I382cd0821723436120af47c06ec7bfa849636307
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
We forgot to reset the flags when replacing the element, so we ended up
with an integer with HasByteData after:
testMap[0] = QStringLiteral("value");
testMap[0] = 42;
Fixes: QTBUG-80342
Change-Id: Ia2aa807ffa8a4c798425fffd15dabfa066ea84b0
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
This is so that we can do simple changes to the docker images
in provisioning, without needing to update the tag here.
If a backwards-incompatible change in the docker images needs to be committed
in provisioning and here, it is possible because the images retain their old
unique SHA1 tag, in addition to being tagged as latest. See comment for more
details.
Requires the change in qt5 repository, with commit sha:
e4f9ac5607a329bae045567a339d36469bc4fff6
Task-number: QTBUG-79867
Change-Id: I1bc72edec62487530575d7e113a25afe16d09129
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
As opposed to unite(), this inserts one hash into the other
without duplicating elements.
Change-Id: Ifc786c48f5dc3ab18c29782e73eac3c1a3ef8981
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QDoubleValidator would accept "1,23" as valid in a locale which has ','
as a thousand separator. However, it should have been Intermediate
instead, as there is still one digit missing.
Fixes: QTBUG-75110
Change-Id: I6de90f0b6f1eae95dc8dfc8e5f9658e482e46db3
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The new version takes/returns a value that can be unpacked and passed to
other functions without knowing which backend is in use.
The old API will be removed in a later change when dependent modules have
been updated
Task-number: QTBUG-78570
Change-Id: I18d928ceef3cb617c0c509ecccb345551a7990af
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
The code was assuming that if the parsing of the value worked,
then it must be a list of 4 variants. But in this case it's just
a single length.
This came from <td> using 4 values for border-width
while other elements use a single value. But the storage
is shared. So the fix is to use 4 values everywhere.
When reading 4 and there's only one, it gets duplicated,
so the caller can just use the first one in that case.
Task-number: QTBUG-80496
Change-Id: I682244b6e3781c4d673a62d5e6511dac263c58e8
Reviewed-by: Nils Jeisecke <nils.jeisecke@saltation.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This will blacklist this test for ci. Currently blocking enabling tests
for MSVC2019
Task-number: QTBUG-65667
Task-number: QTQAINFRA-2875
Change-Id: I7198490b1529ce2f4409bfa7399031dad7644a06
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This patch aims to implement the session management available on macOS.
Currently applicationShouldTerminate is just a go through that closes
everything and ends the application. The new implementation calls
first appCommitData and cancels the termination properly if required.
This means that if a user wishes to logout, Qt applications can now
cancel that like e.g. answering to Safari asking whether it is ok to
close because of a number of opened tab/window.
Fixes: QTBUG-33034
Change-Id: Id5d7416cb74c762c5424a77c9c7664f0749da7f6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The code was initially introduced in
9204b8c31e but getting the names were
conditioned on whether or not Windows identified it as a truetype font.
This excluded cases which had preferred names embedded but was not
truetype fonts. To fix that we run the code unconditionally.
[ChangeLog][Windows] Fixed a bug where some fonts would not be
accessible by referencing their typographic name.
Fixes: QTBUG-78556
Change-Id: I8823684b09cce3b1b8722b1e609a5bb49b13da13
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
We need to reset the pressed index when the decoration was pressed on
otherwise if the mouse ends up over an already selected item that was
previously clicked on. This prevents it from thinking that the mouse
has been released on this item right after pressing on it.
Fixes: QTBUG-59067
Change-Id: Iab372ae20db3682ab0812661f86533079ba4083c
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Some structures needed to be cleaned for the reuse to be safe.
Reusing it cuts down on the overhead in lancebench.
Also uniqueness of block names are now enforced, and the common pattern
of "end_block blockName" could now be parsed if not always commented
out by begin_block handling.
Change-Id: I0daf6445292383aaab9392550d0842e0a654ad27
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Instead of OID as string, OpenSSL returns a human-readable name.
No need to fail then, use such a name in QVERIFY if OID not found.
Fixes: QTBUG-80329
Change-Id: I4392fc9f37367f7c34c05d172db015b44e2a8497
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The aim is to make it suitable to test for High DPI
bugs, ideally removing the need to provide bug report
examples.
- Add descriptive window titles/output
- Add options to force scaling on/off
- Change the updating of the text to be done in screenChanged()
and log the signal.
- Rearrange the layout and show the descriptions as labels
Task-number: QTBUG-80323
Change-Id: Ia44c184c2b38cb18045c40b440fe785c6c17925f
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
- Use C++ constructs like range-based for, member initialization
- Fix formatting in a few places
- Silence clang warnings:
- Add override
- Make member variables private
Task-number: QTBUG-80323
Change-Id: I5b0fda06acb6c8054aafa4dd934b763f8493a6b3
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
macOS fails to create a zone for the name its own systemTimeZone
claims to have (see new comment). So make sure we do consistently
recognize the name systemTimeZoneId() returns, using systemTimeZone
from which we got its name.
Add minimal testing of system time-zone.
Fixes: QTBUG-80173
Change-Id: I42f21efbd7c439158fee954d555414bb180e7f8f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When the geometry of a hidden widget was set with setGeometry(),
WA_PendingMoveEvent and WA_PendingResizeEvent were set unconditionally
even if the crect already had the correct value. This lead to
unneeded Move/Resize events within sendPendingMoveAndResizeEvents().
Fixes: QTBUG-75475
Fixes: QTBUG-79906
Change-Id: Ibbe03882f039948b6b7c04887420741ed2e9c0f7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Replace QWidget::repaint() with update() + wait until the paint event is
received.
Task-number: QTBUG-80237
Change-Id: I57da7cd8fa119344484b849a88729bca7b48616c
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
For Metal and Vulkan this needs actual work because that's where
the concept of renderpass descriptors is relevant. GL and D3D can
just return true always.
The big benefit of this is that Qt Quick can now compare renderpass
descriptors via isCompatible() for its pipeline cache (similarly to
how it is already using isLayoutCompatible() for srbs), and so
renderpass descriptors for layers (Item.layer, ShaderEffect) will
typically be compatible and so can pick up pipelines created by other
layers from the cache.
Also add autotests for shader resource binding and renderpass descriptor
compatibility.
Task-number: QTBUG-80318
Change-Id: I0008bc51c4ee13b0113d2c8caf799e1257f18a18
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
The ones we reject used a zero offset while the one that does parse
(though it shouldn't - revised comment) has a one hour offset. Made
them all use that offset and added a partner test that has no invalid
characters, so ensure the success of the invalid character tests isn't
due to falsely rejecting the valid date/time text to which the invalid
characters are added.
Task-number: QTBUG-80038
Change-Id: I6e3dd79b981af6803e60877229c56599cfd719cb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The qdatetime implementation's rfcDateImpl() uses regexes which did
not match its comments; nor did either the regexes or the comments
match what was documented. A review of relevant RFCs suggests we
should revise this in future, probably at Qt 6.
The documentation also only addressed the formats recognized when
parsing a date-time, without indicating how they are serialised or how
dates and times are handled separately.
Added a note to the tests for the read-only formats, to remind the
reader that the RFCs merely recommend recognising these - be
permissive in what you expect and strict in what you deliver.
Change-Id: I0f0bec752e7a50bde98cceceb7e0d11be15c6a6f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
While we are at it, remove the Border and MirrorOnce wrap modes that have
not been supported on OpenGL, because they are unsupported with Metal+iOS
as well.
Task-number: QTBUG-78580
Change-Id: I0db94b9d3a6125b3bb5d7b1db5d02a42cd94d2c2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reimplement QDomDocument using QXmlStreamReader and switch to the new
implementation starting from Qt 6.
The changes in the behavior are reflected in tests: some test cases
which were marked as "expected to fail" are now passing.
Task-number: QTBUG-76178
Change-Id: I5ace2f13c036a9a778de922b47a1ce35957ce5f6
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
We already did that when parsing from CBOR binary data, so the code was
already present.
[ChangeLog][QtCore][QCborValue] The constructor taking a CBOR tag and a
value to be tagged now attempts to convert to a QCborValue extended
type. For example, if the tag is 0 (UnixTime_t) and the payload is a
number, the resulting object will become tag 1 (DateTime) and the
payload will be the the ISO-8601 date/time string.
Fixes: QTBUG-79196
Change-Id: I6edce5101800424a8093fffd15cdf650fb2fc45c
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The convenience functions setBackground(), setForeground() and
setSizeHint() a default constructed value as 'reset'. This means a
default constructed QBrush or QSize is returned in the data() function
which leads to an unexpected background or forground color or size hint.
Therefore check if the passed value is a default constructed value and
set an empty QVariant instead which.
[ChangeLog][QtWidgets][ItemViews] The convenience views
QList/Table/TreeWidgetItem now treat a default constructed QBrush or
QSize as an empty QVariant which allows to reset the values set to it's
default values.
Task-number: QTBUG-76423
Change-Id: I840570bbad3e5fd8c5b4b58903b4fd0066dbdeb7
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
At the time of writing, they were still planned to be in qtbase.
Change-Id: I27cba2bbd176d930990270ea68f077ec6e0a2d5b
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
This was used to support QFlags f = 0 initialization, but with 0 used
as a pointer literal now considered bad form, it had been changed many
places to QFlags f = nullptr, which is meaningless and confusing.
Change-Id: I4bc592151c255dc5cab1a232615caecc520f02e8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDomElement::setAttribute(QString, double) did not use QString::setNum()
but qsnprintf(). This is wrong because qsnprintf() is using the current
locale instead QLocale::C. It was also inconsistent to
QDomElement::setAttributeNS() which was already using QString::setNum().
Also fix the documentation which stated that all
QDomElement::setAttribute() format the values according the current
locale.
Fixes: QTBUG-80068
Change-Id: Iabb0b39c0d0723060527542c283a5435f26f31ca
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Allegedly Apple has fixed the bug that made this necessary, so we
should be able to include these two test-cases once more.
This reverts commit ba9585bd02.
Fixes: QTBUG-69875
Change-Id: I5ac6019c0d647691eda6cdbb2a53e7471859d4a3
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
QComboBox had no option to tell the user that he must select an item -
there was no placeholder text like e.g. in QLineEdit. This feature is
widely used in html forms so we should support it also.
Therefore add a new property 'placeholderText' to specify a text which
should be shown when the current selected index is invalid.
[ChangeLog][QtWidgets][QComboBox] QComboBox got a new property
'placeholderText'
Change-Id: If6dac45c9f43455474e267907b0b0d893301c611
Fixes: QTBUG-1556
Fixes: QTBUG-2776
Fixes: QTBUG-77141
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Consider this simple example:
QLineEdit edit;
edit.setInputMask( "9-9-9-9-9-9" );
edit.show();
Without any input, m_text will contain: " - - - - - ". text() removes
the input mask's mask characters from that and returns " ". A string
with 6 spaces. Thus currently the End key jumps to position 6, which is
in the middle of the string. Using m_text the End key jumps to the actual
end.
[ChangeLog][QtWidgets][QLineEdit] Fixed End key in combination with
certain input masks.
Task-number: QTBUG-16187
Task-number: QTBUG-20414
Change-Id: Ibb30a1dfa2f78103611b5afc9971dc43e8bdcc4a
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Provide pointer to member function overloads for the QShortcut ctor. The
ctor with two functors but no contexts is not provided since it creates
ambiguousness.
[ChangeLog][QtWidgets][QShortcut] QShortcut ctor has now pmf overloads
Fixes: QTBUG-77816
Change-Id: Ic9a759cde5150dbb94c2fd351b88ee8e447e0852
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Within QTreeView::setModel() the header might emit columnCountChanged
which then tries to update the geometries based on the old model which
is wrong.
Fix it by setting geometryRecursionBlock to true so
QTreeView::updateGeometries() will not ask the old model for it's data.
Fixes: QTBUG-75982
Change-Id: Ia0dd36cd7c6c5347fbc285deac43da6941accbe7
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Adds instrumentation for fuzzing to the binaries but links to the usual
main function instead of a fuzzer's. The similar sanitizer "fuzzer"
should then be used only for building the test itself.
Requires clang 6 or higher.
Change-Id: I24ee1f018b0b97f2977dc86fbdc29a164d7c4e01
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Android uses its own time-zone naming, which includes a zone called
"Canada/East-Saskatchewan", whose second component is 17 characters
long. This violates a rule in the IANA naming scheme for zones, that
limits components to 14 characters each. So tweak the isValidId()
check to allow Android its long names.
Android has added Outer Mongolian time-zones, which are as borked as
many others in 1970, so blacklist those transitionEachZone() tests.
Fixes: QTBUG-69128
Change-Id: I46f674f095431335b16900860d83b624257ae3bb
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
With logging enabled, all the output will slow down
execution and fill up your hard disc in about a day.
Task-number: QTBUG-79050
Change-Id: I5dcac2f349f7dbe471a5e6dd7006b89d312aeeaf
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
They were tucked away in the back-end of the isTimeZoneIdAvailable()
test, but a separate isValidId() test had been added more recently,
which made some (arguably all) of them redundant. Reworked this test
in the process, so that the QSKIP() happens in _data() once instead of
in the test that's never run because there are no data rows.
Change-Id: Icaa6227ace9a1aa944d085691cdcfb3adf4a51dc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
On NTFS, a junction point can be created and deleted by the mklink and
rmdir commands, respectively. If a directory is not identified
correctly as a junction, then applications will likely try to remove
it using recursive methods, leading to fatal data loss.
With this change, Qt can identify file system entries as junctions,
allowing applications to use the correct file system operation to
remove it.
The test needs to delay the cleaning up of junctions and files it
creates until the checks are complete; since they might fail and make
the test function return prematurely, use a scope guard.
[ChangeLog][QtCore][QFileInfo] Add QFileInfo::isJunction so that
applications can recognize NTFS file system entries as junctions
Task-number: QTBUG-75869
Change-Id: I3c208245afbd9fb7555515fb776ff63b133ca858
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Obtain the client area and output frame and position relative to the
parent window.
Task-number: QTBUG-79861
Change-Id: I193dfbcdec7e27d32a70ada08ba271260eedc969
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
It was converted over ARGB32PM, when it should have been directly
converted to not lose accuracy, instead there was an unnecessary direct
ARGB32->RGB30 conversion, which was converted to the necessary type.
This also improves the selection of conversion over ARGB32PM or RGBA64PM
for ARGB32 and RGBA8888 by using 32-bit conversion when alpha is not
relevant.
Change-Id: I5990d8a23b2909d3910d8c1213fa46477742b052
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Since the test was fatuous for i == 0, iterate from i = 1, instead.
Change-Id: I9b9c1b7b10639aefdd74f48051d592da4f84dc85
Reviewed-by: Jesus Fernandez <jsfdez@gmail.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
It doesn't make a lot of sense to have two names for the
same role. Use 'fileIcon' exclusively for the Qt::Decoration/
FileIconRole.
Change-Id: Icaa46ba4aa61efc56ba007a14bab5e59ea26cd35
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
You can save a "skeletal" document with list items to fill in later,
the same as you can do in HTML or ODF format. Reading them back via
QTextDocument::fromMarkdown() isn't always perfect though.
Fixes: QTBUG-79217
Change-Id: Iacdb3e6792250ebdead05f314c9e3d00546eeb9f
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The markdown parser generates empty lists in some cases when a character
that can be used as a bullet is found on a line by itself.
cbEnterBlock() and cbLeaveBlock() are called symmetrically in such cases.
QStack::pop() on an empty stack triggers an assert, so push and pop need
to be done symmetrically too. But it's difficult to actually create the
list as soon as the MD_BLOCK_UL or MD_BLOCK_OL callback occurs, without
breaking the case fixed in 7224d0e427 (and
probably other cases). That's because QTextCursor::insertList() creates
a list item at the same time as it creates the list itself, and also
inherits block formatting from the previous block. We now insert empty
lists with empty items whenever the need for that is detected though,
and there's a failsafe to prevent popping in case something still goes
wrong with that logic. We aren't strict about reproducing the original
markdown when regenerating it via toMarkdown(), but it's getting closer.
Fixes: QTBUG-78870
Change-Id: Ided194ce7aec2710c60dbac42761ee4169ed9b78
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Robert Loehning <robert.loehning@qt.io>
If a font with only a family set is resolved with one that has been setup
with setFamilies() then the family needs to be prepended to the families
list after resolving. This is so that the font still prefers the one set
as just a family with no famillies set.
This also amends the QFontDialog test to account for this too.
[ChangeLog][QtGui][Text] Resolving a font that just has a family set
with families set will prepend the family to the families so that it
is still the first preference for the font.
Task-number: QTBUG-46322
Change-Id: Icc4005732f95b2b4c684e592b06b31e133270e44
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
In qmake syntax there should be a colon or curly braces following a condition.
Change-Id: Ibd989662aef6320cec8093e7c6103bf8362b8255
Reviewed-by: Liang Qi <liang.qi@qt.io>
OpenSSL 1.0.2 will stop receiving all support at the end
of 2019. Qt 5.15 is our next LTS thus makes sense remove
OpenSSL 1.0.2 support there. This also allows us quite
a significant cleanup of an old heavily if-defed code
and all 'pre11' suffixed source files.
[ChangeLog][QtNetwork][SSL] Removed OpenSSL 1.0.x support, now 1.1.x is required
Change-Id: I70c70c56cbd8aeff793afe793335696d1b1b7408
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Call adjustedFormat() as advised by the docs: "Applications are advised
to set this format on their QWindow in order to avoid potential BAD_MATCH
failures."
Task-number: QTBUG-79659
Change-Id: Ibf415fb0ee64bdd3f01d4ba744244bce811c0d27
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Had to teach the update program to accept category Lm as for
Joining_Transparent, for the sake of a new ArabicShaping.txt entry.
Added three new Unicode versions, several new scripts and a new
word-break class.
Updated UCD's test data for tst_QTextBoundaryFinder. This left 57
tests failing; I have commented out the data rows for those tests,
pending someone with more knowledge addressing this.
Task-number: QTBUG-79631
Task-number: QTBUG-79418
Change-Id: Ic33d3b3551195d47a84d98e84020f57a68f0b201
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Do this by templating the floating-point tests, which removes some
existing duplication as well as avoiding new duplication. Did some
renaming in the process. Added some tests of fuzzyCompare that come
closer to its boundary. Increased number of tests from 69 to 97. Use
std::numeric_limits to replace assorted hard-coded constants and old
C-library boundary-value macros.
It turns out MSVC's float conflates quiet and signaling NaN (although
MinGW's doesn't); and WebAssembly's old fastcomp compiler conflates
NaNs for both float and double; so XFAIL the test for distinct NaNs in
those cases.
Change-Id: I0a1c0d2f68f75d51b8cda9e3ddfe7fa9c190a3e2
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Erik Verbruggen <erik.verbruggen@me.com>
Binary JSON is said to become deprecated. Therefore, add support
for CBOR. Binary JSON is still supported for deserialization, so
all existing .qsb files will continue to work, as long as the
binaryjson feature is enabled in the Qt build.
Also makes QShaderDescription comparable. This is important for
tests in particular.
A nice side effect of using CBOR is that .qsb files become smaller.
For a typical Qt Quick material shader this can mean a reduction of
300 bytes or more.
Task-number: QTBUG-79576
Change-Id: I5547c0266e3e8128c9653e954e47487352267f71
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Testes file load and save, computes a sha256 hash
for verifying file content.
Change-Id: Id7f697c4dfd41e051442350f4050f04b493cfc18
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
When a window is closed, then it will cause the child windows to be
closed as well as a result. Therefore in order to ensure that they are
shown again as a result, we need to remove the WA_WState_ExplicitShowHide
attribute if the widget was not already hidden before. This enables us to
test for this attribute when calling showChildren(), so that if the
window has a windowHandle then we can make sure that this widget is shown
again.
Fixes: QTBUG-73021
Change-Id: I1186242b889899dfcd38d782a67567348e2055ee
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Cleanup QDataWidgetMapper/QFileIconProvider/ItemEditorFactory autotests:
- use range-based for loops
- use nullptr
- use member initialization
- use new signal/slot syntax
- use static invocations
- use override
Change-Id: I1a36ea2da7de1cfa5d5d4e305ef508fda3a6c460
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
If a transfer timeout is set for QNetworkRequest, downloads
and uploads are aborted if the timeout expires and bytes
haven't been transmitted in either direction.
Task-number: QTBUG-3443
Change-Id: I702d223d673f0c6612343dc9d053815acfcb61b8
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Released on October 4th.
Adds Windows names for two time zones, Qyzylorda and Volgograd.
Added languages Chickasaw (cic), Muscogee (mus) and Silesian (szl).
Norwegian number formatting has flipped back to using colon rather
than dot as time separator; it's flipped back and forth over the last
several CLDR releases. The dot form is present as a variant, the
colon form was long given as the normal pattern, then went away; but
now it's back as a contributed draft and that's what we pick up.
The MS-Win time-zone ID script was iterating a dict, causing random
reshuffling when new entries are added. Fixed that by doing the
critical iteration in sorted order.
Omitted locales ccp_BD and ccp_IN due to QTBUG-69324.
Task-number: QTBUG-79418
Change-Id: I43869ee1810ecc1fe876523947ddcbcddf4e550a
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
While I was looking into a bug related to problems building the test
without GUI, I noticed a lot of spurious #include lines so tidied up a
bit. Split some long lines, while I was about it.
Change-Id: Id87eb6f612c6b174f8240dfe9c00e0929244fb6c
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
Thanks to Dmitriy Purgin for pointing out the serialization one.
Task-number: QTBUG-79353
Change-Id: Ia3d750b17ddd8fbb7a83a55df7e4546ca78c358b
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The qmake config for tst_QString tried to impose QT_NO_CAST_TO_ASCII
on it, but the source file explicitly #undef-s this symbol and its
friends. Leave the define commented out in the .pro so that a comment
can explain why it's no good.
Change-Id: I7620f4e104f0cdab05fdc246b903c40026e63d76
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Test QT_CONFIG(icu) in the code instead of testing qtConfig(icu) in
the profile and setting an extra define just to shadow what's already
defined. Also remove the matching define from qcollator.pro, whose
test code didn't use it.
Noticed while reviewing the conversions to CMake.
Change-Id: I19d3b1026b2a8f50ec424c450614e721500fd38a
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
See the comment in the test for details.
Change-Id: Ie3d356e476ba0419d304bccd396fc18a831a30cd
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
When the first column is hidden or not visible in the current viewport,
it is not possible to deselect the current row.
Fix it by passing the correct column to
QItemSelectionModel::selectedRows() when testing if the current index is
selected.
Fixes: QTBUG-79092
Change-Id: I9d8082d2b29ad2f799156aee910c6ff6e3217771
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
stat() and friends expect a null-terminated C string. There is no way to
generate anything useful from a string that has null bytes in the
middle. It's important to catch this early, as otherwise, for example, a
QDir::exists() on such a path can return true, as the path is silently
truncated.
Extend the checks for empty file names to windows and add checks for null
bytes.
Change-Id: Ie9794c3a7c4fd57f9a66bdbbab8b45a08b6f9170
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
During the creation of a raster paint engine in QImage::paintEngine(),
the QImage will be detached. At least old gcc versions would get
confused so that the newly created paintengine would end up in the old
QImage copy insteads of the newly detached one. Work around by
dropping the temporary engine pointer.
Fixes: QTBUG-79383
Change-Id: I27b1f24312269bc2bcc641dc4334397a92e3bfbb
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The default font on Windows ("Times" is not found) does not have
a ligature for "fi", so the test would not actually be testing
what it was supposed to on this platform, and would pass even
when the code was buggy.
To enable the test on Windows, we select a standard font which
has the ligature (Calibri).
Change-Id: Ic117cd8e549aa729a0cd68006d7c180c6c89c053
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Either by testing for platform name or window activation.
After this gets in, we can enable widget tests in the Wayland bot, which
hopefully will reduce the number of regressions in the Wayland plugin.
Fixes: QTBUG-62188
Change-Id: I71ce8abd6b5891e5b953126b1c35345892585931
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
For some scalings, setClipRect(QRect) would produce a clip one pixel
different from setClipRect(QRectF) because of different
rounding. Ditto for setClipRegion. Fix by making sure to transform
QRectFs instead of QRects.
Fixes: QTBUG-78962
Fixes: QTBUG-78963
Change-Id: I0be721133858c30769ec6d81e978962a3d6b70cf
Reviewed-by: Christoph Cullmann <cullmann@kde.org>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
CMake will complain that we have a duplicate test name otherwise.
Generally it makes a lot of sense to name the test binary the same as
the test itself.
Change-Id: I27c4b51e6a2869f025e1100f1a9dd6b54ebdaf55
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Morten Kristensen <me@mortens.dev>
Reviewed-by: Liang Qi <liang.qi@qt.io>
Makes the tests pass on Wayland.
Task-number: QTBUG-62188
Change-Id: I5860c1ae6dd3d15632d827f4e357cb6c2cc9c5e3
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This makes the test pass on Wayland.
Task-number: QTBUG-62188
Change-Id: Ib67cf8913055bbe753f71791095aff035342c18d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
[ChangeLog][QtCore][QAbstractItemModel] The match() method now
supports the new Qt::RegularExpression match flag value. This
will allow users to use either a string or a fully configured
QRegularExpression when doing searches. In the second case,
the case sensitivity flag will be ignored if passed.
Task-number: QTBUG-72587
Change-Id: I07c8d72a661c48b7f4fcf13ef8e95980bcdcb998
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Remove some code which was commented out with 'NOT_READY_YET' since the
initial Qt5 import. Since the mentioned bug reports are no longer
available remove this code.
Change-Id: I98686e53d85619f01d16105d147eba79b557a104
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Prefer qWaitForWindowExposed over qWaitForWindowActive whenever possible, skip
in the other cases.
Makes the test pass on Wayland.
Task-number: QTBUG-62188
Change-Id: I60b4000c72c3727a2f33b79a5038469055b0fef2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Makes the test pass on Wayland.
Task-number: QTBUG-62188
Change-Id: I53011ad623e4bdb557d79c136f06ce7ac00a08ee
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Makes the test pass on Wayland.
Task-number: QTBUG-62188
Change-Id: I3900925e74d8d940a8c5af87ea64a6ec3c8c3293
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
QDesktopWidget is marked as obsolete in docs, but it is not yet
completely deprecated, some of its methods are still in use.
Replace uses of the following methods marked as obsolete:
- QDesktopWidget::screenNumber(QWidget*) -> QWidget::screen()
- QDesktopWidget::screenGeometry(QWidget*) -> QWidget::screen()->geometry()
- QDesktopWidget::availableGeometry(QWidget*) -> QWidget::screen()->availableGeometry()
Task-number: QTBUG-76491
Change-Id: I2cca30f2b4caa6e6848e8190e09f959d2c272f33
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When a prepared statement is still alive after the database was removed
with QSqlDatabase::removeDatabase(), the cleanup routine is trying to
access the driver which is no longer alive which results in a crash.
Fixes: QTBUG-79019
Change-Id: I4630e3b947a12b23ed062f015abc373fc0e246c1
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Add a RAII class for registry keys and use it throughout
the code base.
Change-Id: I666b2fbb790f83436443101d6bc1e3c0525e78df
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When calculating the header section size based on its contents when a
stylesheet is used, the size hints from the stylesheet are used. In case
if the stylesheet specifies only one of the sizes, the other is set to
-1. Because of this the actual content size is ignored.
The solution is to calculate the size based on the application style, in
case if it's not specified in the stylesheet.
Fixes: QTBUG-75615
Change-Id: I3453fa623d75b6b32832edf753de6e3e4e7f5a22
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Some windowing systems (i.e. Wayland) do not allow applications to steal window
focus.
Normally, we would just replace qWaitForWindowActive with
qWaitForWindowExposed, because that is usually the intent, in this test
however, there are many occurrences of both variants right after each other.
And, as described in the commit message of 153e8b49a, this may be because
window activation may cause repaints, and we want to wait for it to reduce
the chance of receiving an extra repaint later (possibly causing tests to be
racy).
Therefore, I took the conservative approach, and kept the qWaitForWindowActive
calls, except when the capability is not available. Hopefully this will not
cause flakiness in existing platforms, while also allowing tests to pass on
platforms where activation is not supported.
Task-number: QTBUG-62188
Change-Id: I15502baa28c464a808d585a5e6d67c9b745b17ae
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
- Replaced the usages of the following deprecated APIs:
* QDesktopWidget::screenCount() -> QGuiApplication::screens().size()
* QDesktopWidget::screenGeometry(int) -> QGuiApplication::screens().at()
* QDesktopWidget::screenNumber(QPoint) -> QGuiApplication::screenAt(QPoint)
- Added notes for the QWidget *QDesktopWidget::screen(int), which
currently has no replacement.
- Fixed the tests to build conditionally, only when these APIs are
enabled.
Task-number: QTBUG-76491
Change-Id: I2fdec96d0a6a4fc782c53549b05a5556412b8305
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
MySql 5.0 was released 2005 so it's time to remove support for MySql 4.x
14 years later.
[ChangeLog][QtSql][QMYSQL] Removed support for MySql < 5.0 since 5.0 was
released 14 years ago.
Change-Id: I45005accdffefbd9338ac0e710512a4c7ea8e09e
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Always try to create the runtime directory and never change
the permissions of an existing directory. Conform to the
XDG Base Directory Specification:
"If, when attempting to write a file, the destination directory
is non-existent an attempt should be made to create it with
permission 0700. If the destination directory exists already
the permissions should not be changed."
Fixes: QTBUG-68338
Change-Id: Iaf854d69225fc46e43abae86232d749e5c247df0
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A previous fix has caused a performance degradation while adding a
check for avoiding adding duplicated rectangles to the update list.
This patch fixes it by using a std::set instead of a QList, avoiding
duplication while using an O(log N) operation, instead of the O(N)
used before.
Fixes: QTBUG-77952
Change-Id: Ifa9fbf110e0bad60ee02a42d91281981fd98ceab
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Only allow implicit conversions when the types involved are compatible.
That means, only allow construction and copy assignment when the type
X* is convertible to type T*. This is done using SFINAE and the
std::is_convertible type trait, which makes the previous
QSHAREDPOINTER_VERIFY_AUTO_CAST obsolete.
This patch fixes compilation when a function is overloaded with
Q{Shared,Weak}Pointer of different, incompatible types. Previously, this
resulted in a compilation error due to an ambiguous overload.
Change-Id: I069d22f3582e69842f14284d4f27827326597ca2
Fixes: QTBUG-75222
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The childEvent handler sets the enabled property of children as they are
added to the groupbox, but applications might later enable children and
check/uncheck the groupbox's checkbox in undefined order. In that case,
we would end up with enabled children inside a conceptually disabled
groupbox (the groupbox's checkbox represents the logical "disabled"
state), which breaks documented QWidget::enabled rules.
To make sure that all children are disabled as per the state of the
groupbox, we need to run that logic once the UI has been set up, and
before it becomes visible. This is what polishing is for, so listen
for that event in addition and handle it the same way as adding (which
duplicates things, but keeps existing code that might depend on things
being updated as they are added working).
Adds the case to the existing enabledChildPropagation test case.
[ChangeLog][QWidget][QGroupBox] Always disable children of a checkable,
unchecked group box before showing.
Change-Id: I978bd27b6f1a3f54ec745faeea529a98d0d93619
Fixes: QTBUG-25938
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Both the spline curves and (most of) the predefines curves are defined
as having start value 0.0 and end value 1.0. The spline and In/OutBack
functions would sometimes not produce that result precisely, so code
could not reliably depend on expressions like (easedValue < 1.0)
becoming false. Fix by explicitly handling endpoints.
Fixes: QTBUG-76781
Fixes: QTBUG-72630
Change-Id: I21be43af469a76c090154bffef8406a9baf2d0b1
Reviewed-by: Thomas Hartmann <thomas.hartmann@qt.io>
A default-constructed QDateTime is invalid, but compared equal to a
valid one referencing the start of 1970. This lead to date properties
in QML being initialized invalid but not getting an onChange if the
first value they're set to is the start of 1970.
Fixing that then lead to some tests failing. Indeed, the original
equality check involved using toMSecsSinceEpoch(), whose value is
undefined unless the datetime is valid, without a prior check on its
validity: so ensure all uses of toMSecsSinceEpoch() are guarded with
isValid() checks.
Reworked tst_QDateTime::toSecsSinceEpoch() to use its bool column
(previously unused, after separating from toTime_t(), which uses this
column for "out of time_t's range") for validity of the datetime.
[ChangeLog][QtCore][QDateTime] Invalid datetimes are now treated as
equal and less than all valid ones. They could previously be found
equal to valid datetimes.
Fixes: QTBUG-79006
Change-Id: Ie72deb8af4350a5e808144d0f6e42dc8eb3ff5ef
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Cleanup QAbstractItemView autotest:
- use range-based for loops
- use nullptr
- use member initialization
- use new signal/slot syntax
- use static invocations
- use override
- replaced QCoreApplication::processEvents with
QTRY_VERIFY/QTRY_COMPARE
Change-Id: Iba91811db6fb925364fc88ec36357e758b937329
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
It seems like qmake is happy with the comment, followed by a
continuation and then another comment, but having the continuation at
the end of the line makes more sense.
This will make it easier to port to CMake.
Change-Id: I20c964e8c3b6fea4745095783503045b191b000b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
There is no onscreen support for WinRT in the D3D11 backend yet.
However, offscreen operations (rendering into a texture) should work.
One catch is that there is no D3DCompile available for deployed WinRT
apps. So ship the intermediate format (DXBC output from fxc) in the
.qsb files.
Change-Id: Ic0aba4b817c27d13dcf3af41bf7612d799382655
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Also improve (docs and runtime checks) and test the minimum set
of required data to create a graphics pipeline.
Task-number: QTBUG-78971
Change-Id: If5c14f1ab1ff3cf70f168fde585f05fc9d28ec91
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
The joys of "level - Specifies the mipmap level of the texture
image to be attached, which must be 0." for glFramebufferTexture2D
in OpenGL ES 2.0.
Change-Id: Iaf19502f48d7ba73b26abb72535bfa6696a1e182
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
...and make the Null backend able to deal with these, for RGBA8 textures
at least. Naturally it is all QImage and QPainter under the hood.
Also fix a bug in the OpenGL backend, as discovered by the autotest:
the size from the readback did not reflect the mip level.
Task-number: QTBUG-78971
Change-Id: Ie424b268bf5feb09021099b67068f4418a9b583e
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
This also marks the beginnings of significantly extending autotesting
of the resource and rendering functionality in QRhi.
Also involves fixing up the buffer operation lists like we did
for textures before. This is to ensure updates and reads on the
same batch execute in the correct order. So just have two lists:
one with buffer, one with texture operations.
Also simplify the struct layouts. No need for those inner structs
with many duplicate members. This reduces the size even, since using a
union was never an option here. Also switch to a VLA, the size is around
253 KB per batch.
The Null backend now keeps track of the QRhiBuffer data so it can return
valid results in readbacks.
Task-number: QTBUG-78984
Task-number: QTBUG-78986
Task-number: QTBUG-78971
Task-number: QTBUG-78883
Change-Id: I9694bd7fec523a4e71cf8a5c77c828123ebbb3bd
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
