The shortcut needs to be cleared if the native menu entry is being
hidden due to the fact it was changed. Otherwise it will not show the
shortcut anymore as it sees it as in-use.
Change-Id: Ifb10db855766e4de71db06ea006f6d63497f3193
Fixes: QTBUG-74113
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
QPlatformWindow::initialGeometry() would assign a default height to
the initial geometry of the QRollEffectClassWindow since it has height
of 0. This causes the obtained geometry to not match and subsequently
a geometry change being sent synchronously.
Introduce a new flag QWindowPrivate::resizeAutomatic similar to the
existing QWindowPrivate::positionAutomatic to prevent assigning a
default size and pass through the geometry as is where required.
Fixes: QTBUG-74176
Change-Id: I70c66490838a2c4dfe200ec86094d28bd984dd03
Reviewed-by: Kati Kankaanpaa <kati.kankaanpaa@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Introduce a logging category for the qDebug()-output.
Add a meta type registration for QList<QPersistentModelIndex>, fixing
numerous warnings like:
WARN : tst_QItemModel::remove(QStandardItemModel:invalid start, valid count 5) QSignalSpy: Unable to handle parameter 'parents' of type 'QList<QPersistentModelIndex>' of method 'layoutChanged', use qRegisterMetaType to register it.
Fix a Clang warning about potential misuse of operator ,
Task-number: QTBUG-73864
Change-Id: I60998403a44f5df8767926951ee13d1ed1e93c37
Reviewed-by: David Faure <david.faure@kdab.com>
To get appropriate aspect ratios for the splash screen, you usually
need separate drawables for the portrait and landscape versions.
We support this by adding two new meta data entries that can be used.
If they are not available, we will fall back to the generic one,
so we are still compatible with existing AndroidManifest.xmls.
[ChangeLog][Android] Added entries in the AndroidManifest.xml for
specific portrait and landscape splash screens. If one is present
for the current orientation, it will be preferred over the generic
one.
Task-number: QTBUG-74029
Change-Id: I5ffea56320aef85f62f21a59df4d077b4163a65a
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
When painting into a pixmap, we would apply the system clip,
which is a rectangle that starts at the position of the current
widget relative to the window. If the widget was not positioned
at (0,0), we would therefore clip the top left part of the drawing
when drawing into a pixmap, which is obviously not intentional.
The solution is in accordance with how it is done in e.g. the OpenGL
paint engine, where useSystemClip is set to true only if we are
drawing to a widget. The system clip should otherwise be ignored,
so we do that in the X11 paint engine as well.
Task-number: QTBUG-70387
Change-Id: I9cad26019970280a8a452dc6f1015d229120cac5
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
QIcon::paint() paints blurry icons on HighDPI screens.
In particular, it is called by QCommonStyle to paint
icons for CE_ItemViewItem's.
Change-Id: Iffe6bd01a8756e617656195ef63fe13c968e0832
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The patch causes an Assert on close and thus cannot be used as is. I do
not have ICC available to try to come up with an alternative solution so
the patch is reverted for the time being.
This reverts commit 93a78799c3.
Fixes: QTBUG-74467
Change-Id: Ic572dfa667a479686675eb3f9066d133657b4499
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Yuhang Zhao <2546789017@qq.com>
Copy the test data into a temporary directory and do all the work there
without tainting the source directory. More importantly, do not pull in
any settings from the Qt build to test what actual users will encounter.
Change-Id: I793b86bfadb7597efb47c8f2d3fc863384c78a79
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
This will enable modules like QtWebView which needs to generate its
qmldir at qmake time since it changes depending on whether QtWebEngine
is available or not. This ensures that it is not created in the sources
directory and in the build directory and correctly picked up.
Task-number: QTBUG-65092
Change-Id: Iac628b97145d29778f554510e8e07102d588df64
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Fonts look ugly when they are drawn scaled without
antialiasing.
Change-Id: I64268db5b37d4bc763ffa23632aca2eaac5d8eae
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
INTEGRITY compiler searches for exact filename if the -l argument already
contains .a suffix. GNU linker uses exact filename if -l argument begins
with a colon.
Change-Id: I62be8f1e6b9c7dc7eaa5ab3d4bfc55460d729737
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Destroying windows happens independently of closing them, e.g. when
a window is moved from one screen to another non-sibling screen.
The logic for quitting the application should apply to the actual
closing of a window, as documented.
Change-Id: I2226aff29278aa6fbf054a0994a320eb53196e9e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
As - cannot be used in a function name but can still be used as part of
the TARGET, then we need to make sure that it is replaced to avoid a
compile problem.
Change-Id: I0b2e465310206e2522ce59235b1592517817d3e2
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
QWindowSystemInterface is the de facto API for any plumbing going from
the platform plugin to QtGui. Having the functions as protected members
of QPlatformIntegration was idiosyncratic, and resulted in awkward
workarounds to be able to call the functions from outside of the
QPlatformIntegration subclass.
The functions in QPlatformIntegration have been left in, but deprecated
so that platform plugins outside of qtbase have a chance to move over to
the new QWSI API before they are removed.
Change-Id: I327fec460db6b0faaf0ae2a151c20aa30dbe7182
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
When the window moves to a new screen then we should ensure the screen
is updated at that point with the new size so it can account for any
scaling changes.
This reverts f1ec81b543.
Change-Id: I2be3aab677c4677841a07beaaf373f498483b320
Fixes: QTBUG-72504
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
When a gesture was unrecognized, then it would add itself to the
obsolete gestures hash. This was cleaned up only on application exit,
but as the unregister call happens whenever a widget that had registered
gestures was deleted then the hash could grow quite considerably.
In order to ensure the original intention of the code here, we only
call unregisterGestureRecognizer() when there is a QGestureManager in
place to call it on. Otherwise it would create a memory leak in itself.
Change-Id: I2342f3f737b28be4af7ed531d83f02197eb66c0e
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The current state produces uncompilable code.
Change-Id: I9a68b61866a4a416335ed4d7204c58122803fb1c
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
This work around was added directly to the generated files
at some point, and never to the generator it seems. So to avoid
removing the workaround again when we regenerate the next time,
we need to add it.
Task-number: QTBUG-74511
Change-Id: Ided1bd949234ba82df61c55891646823e7f72e80
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Fixes the warning:
‘QString::QString(const char*)’ is deprecated: Use fromUtf8, QStringLiteral, or QLatin1String [-Wdeprecated-declarations]
return new QEglFSKmsEglDevice(this, screenConfig(), deviceName);
^
Change-Id: I36654f40219bf0f487e70cf2900d3f30335d4fc1
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This adds four new logging categories:
qt.text.drawing, qt.text.hittest, qt.text.layout and qt.text.layout.table
Task-number: QTBUG-72457
Change-Id: Ifbfd6d16231c7f4ba664bc521699e44f98310f77
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This also fixes the documentation for QStyle::SH_Splitter_OpaqueResize
Change-Id: If8afb52ae300e9735a8bc6b065327f17d67f4323
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Add std::nothrow param to avoid exception and
to check pointer against nullptr.
Change-Id: I505abb1ca15b8c10a80b0cd3784a6b0c4c6bcc1c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Set AA_UseHighDpiPixmaps.
Task-number: QTBUG-52622
Change-Id: Ic4373a9c94952f50bc1ad36bcc0dec850efc124a
Reviewed-by: Robert Loehning <robert.loehning@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The naïve approach used for layer-backing in the past caused a detach
of the backingstore QImage on each beginPaint, since the image was
assigned to the layer via a CGImageRef that participated in the
QImage implicit sharing (and had to, so we couldn't get around that).
We now use IOSurfaces, wrapped in a QPlatformGraphicsBuffer abstraction.
The surfaces can be assigned to the layer's content the same way images
could, but allows us to reason more closely about whether or a buffer
is in use, and increases the chance that we will have a zero-copy path
to the screen.
Unless the window has requested a surface format with single buffering
we use a dynamic swap chain of buffers. In most situations there will
be two buffers in play, one assigned to the layer and one ready to
paint to, but during resize and some other situations the buffers
will grow temporarily to accommodate the increased back-pressure.
Since QBackingStore is documented as having single-buffer behavior,
we take care to persist content between the buffers before every
swap. By doing this before swapping, instead of before each paint,
we can avoid preserving areas that will be painted to anyways, and
will in many situations (such as blinking cursors e.g.) end up not
persisting anything.
The RasterGL surface case is handled by reading out the buffer data
and doing a manual texture upload. In the future we can support
direct texture access via CGLTexImageIOSurface2D, but this requires
QPlatformBackingStore::composeAndFlush to learn how to support other
targets than GL_TEXTURE_2D, as CGLTexImageIOSurface2D only works with
GL_TEXTURE_RECTANGLE_ARB targets.
Fixes: QTBUG-48763
Fixes: QTBUG-72360
Fixes: QTBUG-71162
Change-Id: Ica12f69b244e54d0fd31c929730d15657c286af8
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The editor geometry was adjusted in RTL but not in LTR mode before
Qt5.11. 3ed91da499 fixed this but now all
editors are shown with their default size instead adjusting to the item
width. This works in most cases but fails for small column widths and
e.g. a QDoubleSpinBox. Therefore adjust the size policy for the editors
so their default size is ignored and therefore the column width is used.
Don't do this for a QDateTimeEdit since this makes no sense to only show
a cut of part of the editor.
Fixes: QTBUG-74327
Change-Id: Ie526155571bf24a2d8f38e988d8b2af4bfcc92ba
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Since faff43348b the min/maxSectionSize is
respected when setting the current/default section size programatically.
This is not honored when writing out the properties and therefore the
default section size is not correctly set when it's smaller then the
default minimum section size.
Therefore make sure to set min/maxSectionSize property before all other
properties.
Fixes: QTBUG-74352
Change-Id: I8f9ede3e90b7c9c65f8440953b00e1d9d6006d38
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
In commit ec97be5585 an invisible frame calculation was added for
Windows 10 that fixes QWidget::move(0,0) for main windows and dialogs.
But because e.g. Qt::ToolTip windows do not have a window frame, the
invisible margin calculation causes them to pop-up in the wrong
position (off by a few pixels).
[ChangeLog][Windows] Fixed QToolTip pop-ups and QComboBox animation
pop-ups being off by a few pixels on Windows 10.
Fixes: QTBUG-74062
Change-Id: I218e8409a250a8b81ecd1d409b597ebd01fb255f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Split up the code detecting the GPUs into small helpers. Add a
QDirect3D9Handle class providing Direct3D9 functionality, add
GpuDescription::detectAll() and add a QVariantList "gpuList" property to the
native interface.
Task-number: QTBUG-50371
Task-number: QTBUG-65882
Change-Id: I8673542d327837babc2ad8f507da76e8ff5524ea
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
xcb_timestamp_t is a 32-bit unsigned value in miliseconds, so it
wraps after 49.7 days. When it happens, QXcbConnection::m_time stops
updating and copy & paste in an application would not work until the
application is restarted. This patch detects the timer wrap and
allows m_time to wrap too. The fix was verified in KDE desktop with
applications running for 51 days.
Fixes: QTBUG-65145
Change-Id: I328c4179c1b1f71914adda6f9a0ca3991a7e808e
Reviewed-by: Uli Schlachter <psychon@znc.in>
Reviewed-by: Milian Wolff <milian.wolff@kdab.com>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
If the QT_IM_MODULE environment variable is set, then it loads the
IM module accordingly, otherwise it is using the PPS one, if it is
available.
Task-number: QTBUG-54576
Change-Id: Icb8b474805053d8297029096365783c2cabc2cbc
Reviewed-by: Samuli Piippo <samuli.piippo@qt.io>
Reviewed-by: James McDonnell <jmcdonnell@blackberry.com>
(cherry picked from commit 8a7c373f8e)
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We've so far made our public API match the TinyCBOR error codes, so the
conversion is trivial. Having the two functions allows us to change
that, if it becomes necessary.
It also effectively concentrates the Coverity warning about mixed enums
in a single pair of functions.
>>> CID 190307: Incorrect expression (MIXED_ENUMS)
>>> Mixing enum types "CborError" and "QCborError::Code" for "err".
Change-Id: Ifbadc62ac2d04a9a8952fffd1589e739c7a5b745
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
FBOs cannot be shared. Streamline the remainder of the sentence.
Change-Id: I654b23f86f4ee4ea2ca8e71958464d9f55394297
Reviewed-by: Martin Smith <martin.smith@qt.io>
The simplified style needs to work for both light and dark themes
in Qt Creator's help system. Background and text colors are already
applied according to the active theme, this commit removes the rest
of the hardcoded element colors that do not look good with a dark
theme.
Task-number: QTBUG-49417
Task-number: QTBUG-69327
Change-Id: Ib5ebe2755e98ca120f0500ab82713a37ec7199bd
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Previous blacklisting 5c4e5032b5 only
covered RHEL 6.6 and RHEL 7.4. The problem however exists in all
6.x and 7.x distros as they have the same openssl.
This however leaves us the problem with future RHEL 8. This will
keep blacklisting these tests there as well. We need a way to blacklist
versions with a wildcard so that we could say RHEL-7.*
Task-number: QTBUG-46203
Change-Id: I2cc52ba2eac949214ecaa02e19d9e623d5befc49
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Change-Id: I6e61a18697b95d9e3f534d1d71ebf32fdff4a04f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
