QRingBuffer is a fully inlined class used in many I/O classes.
So, it must be as fast and small as possible. To this end, a lot of
unnecessary special cases were replaced by generic structures.
Change-Id: Ic189ced3b200924da158ce511d69d324337d01b6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This reverts the extractTextAppearanceInformations() changes done in
f7ac2b4 and introduces another method extractTextAppearance() for
extracting a specific TextAppearance.
The problem was that extractTextAppearanceInformations() was overriding
the TextAppearance attributes with TextView attributes. This resulted
in wrong text colors for Switch & CalendarView:
- Switch_switchTextAppearance
- CalendarView_dateTextAppearance
- CalendarView_weekDayTextAppearance
Change-Id: Ib300b6eb14649319b2f07012803a4d031a717b50
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Not just filesSelected+fileSelected (which only happens for local files).
Change-Id: Ife592c3c921231356f96cbc2871b6d724a15d2c8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Use the placeholder top level geometry to determine the
screen.
Task-number: QTBUG-40155
Change-Id: If56b239200e9daf754b0963574367cf7891c5f40
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This also coincidentally fixes logging of prepared queries, which previously
weren't logged.
Change-Id: I41b3559080662284699ac3dfa4fa4236342c61d2
Done-by: John Brooks <john.brooks@jollamobile.com>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
The default in QTextStream is to use the C locale, so default
QTextStream are not affected. When you set a QLocale on it, the default
was to use group separators (which is the QLocale default too). This
commit makes QTextStream respect a QLocale in which the
OmitGroupSeparators option had been set.
Task-number: QTBUG-39956
Change-Id: I00fbe12fca7f0287c7217deb487ded6582a03b52
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Instead of playing clever tricks with the index variable, simply
scan through the list of argument-carrying signals and, if nothing
fits there, fall explicitly back to accepted().
Change-Id: I1be49ce601edb854cc1bab5be994b2c09fe31b3c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Otherwise, when interrupting the test half-way (e.g. in gdb),
the user's ~/.config/QtProject.conf would be modified.
Change-Id: Id582c4a3fbf0acbed460126fccf0d39b3a09758a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
This allows to use the "test mode" of QStandardPaths in unittests,
to stay away from the user's real settings.
Change-Id: I1cb1f63a4bff35dfe236924c4dcd7cf761ee50c1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Due to C++'s rule of Argument-Dependent Lookup, a call to an unqualified
qHash(t) will look up qHash in T's namespace. So edit the docs saying
that it must be "global qHash" to say that it should be in the type's
namespace.
Task-number: QTBUG-34912
Change-Id: I7a72800008ccb710b4bb814e42db7a95f385f53e
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
They shouldn't exist in the first place. They exist in two cases only:
1) mistake by the user in the QLibrary or QPluginLoader constructors or
setFileName
2) as a kludge for setLoadHints before a file name is set (we need to
store the user's requested hints somewhere)
This is important for the second case, as otherwise all QLibrary and
QPluginLoader objects without a file name would share the setting.
Task-number: QTBUG-39642
Change-Id: Iebff0252fd4d95a1d54caf338d4e2fff4de3b189
Reviewed-by: David Faure <david.faure@kdab.com>
This commit makes replaces the loadHints member with a setter, a getter
and an atomic variable. The setter will not set anything if the library
has already been loaded.
Task-number: QTBUG-39642
Change-Id: Ibb7692f16d80211b52aaf4dc88db1a989738a24d
Reviewed-by: David Faure <david.faure@kdab.com>
These roles seem wide-spread enough that it makes sense to add them.
QtWebEngine will use them.
Change-Id: I9c2d6ab23ada0607078bcd407a72ecae9f87eeea
Reviewed-by: Andras Becsi <andras.becsi@digia.com>
The previous code assumed that all events would have an object sent
along with them. QtWebEngine breaks this assumption and the rest of the
code is ready for the change, but using QTestAccesssible was not
possible due to this.
Change-Id: Idee21caf3076fbffd02d5e728f0c9cabf8712408
Reviewed-by: Andras Becsi <andras.becsi@digia.com>
The badly named ObjectReorder actually stands for any of this object's
children may have changed. This event is used in webengine and should
trigger the ATs to drop their caches (eg when loading a new website).
Change-Id: I44080f8d43c1161285d9ace4891fe18531f16e09
Reviewed-by: Andras Becsi <andras.becsi@digia.com>
This patch adds the feature use_gold_linker to use the gold linker that
has been part of of GNU binutils since 2008. Gold links C++ libraries
much faster and use less memory.
The feature is autodetected when building Qt on Linux, but can be disabled
in configure. On MingW builds it is default off but can be enabled for
cross builds.
Change-Id: Icdd6ba2e706b2c791bcf44b6e718c2b7a5eb2218
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Allow to alter the default configuration for categories by passing a
message type: All message types with lower severity are disabled in this
category.
This is useful for libraries, which shouldn't mess with the category
registry itself: Setting rules, a category filter ... might cause
conflicts and ordering problems, so this API should be reserved to the
specific application.
For the Qt categories, we have code in the default category filter that
disables the 'debug' category. However, this is hardcoded, and there's no
way so far for other libraries to get the same behavior. With this patch
one can get the same behavior:
Q_LOGGING_CATEGORY(DRIVER_USB_EVENTS, "driver.usb.events", QtWarningMsg);
[ChangeLog][QtCore][Logging] Added QtMsgType argument to QLoggingCategory
constructor and Q_LOGGING_CATEGORY macro that controls the default
category configuration.
Change-Id: Ib2902f755f9f7285d79888ec30e8f3cef95ae628
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
We don't have a way to rename main() inside a LLVM bit-code file yet, so we
error out if we detect that LTO is enabled (which causes object files to be
written as LLVM bit-code), and inform the user about a workaround.
Task-number: QTBUG-40184
Change-Id: I89c927a3a7f075c65e54442c4f7e6bb25175b6f7
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Depending on *.o in the Xcode output dir did not actually result in a
proper dependency. In Xcode5 this didn't matter much, as the effect was
that the build phase was run every time, but in Xcode6 the phase was
skipped. We now depend on the object directory itself, which will get
its modification time updated to match any rebuilt object files.
Change-Id: I8fa6f06c9008c4ce8f7fde7706057ce101bb5727
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
~QDebug() removes any trailing space if autoInsertSpaces() is true.
However, if one uses QDebugStateSaver the global autoInsertSpaces might
be false, but a space was added by a custom operator<<.
Explicitly check for this in QDebugStateSaverPrivate::restoreState. Remove
any trailing space if the local state asks for adding trailing spaces, but
the original one doesn't. Add a trailing space if the local state doesn't
ask for one, but the global state does.
Change-Id: I243b5c76d5ed2c1ec4820da35ab6e254da1551d9
Reviewed-by: David Faure <david.faure@kdab.com>
Instead of having the application delegate set up a UIWindow and root
view-controller, we move the responsibility to QScreen, since in a multi
screen scenario we will need one UIWindow per screen, as well as one
root viewcontroller per window.
Change-Id: If5b0d44b8f8a697d830b33b4fe420bff56a7629b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Useful when using shared directories.
Task-number: QTBUG-39967
Change-Id: I2c082e33133b00306378b6ff58478e94119e6a0e
Reviewed-by: David Faure <david.faure@kdab.com>
Make sure that the stream's formatting settings are preserved.
Change-Id: Ib13b5e0b36b2ef801da2d2d5c240d28dc1b04653
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
-QML basic type page layout is now separate from the other
doc page layouts, but the section offset was incorrect.
-the offset is the same as the QML type pages.
Change-Id: I422e97eebe58a87c11607f2c8c5aedb10abbda7e
Task-number: QTBUG-40335
Reviewed-by: Martin Smith <martin.smith@digia.com>
-QDoc in 5.4 processed QML basic types as separate pages
but the ToC wasn't added.
Change-Id: I5a887158bacef923e765accac7ee5ca7c2c7a12b
Task-number: QTBUG-40335
Reviewed-by: Martin Smith <martin.smith@digia.com>
GCC currently requires fat object files for static libraries, since the
linker would otherwise not load the .o file from the archive at all and
the linking would fail with a lot of undefined references. Clang on
Linux also needs this, but it has no equivalent flag, so enabling LTCG
for Clang on static libraries will result in linker error.
This commit does not add support for enabling it in configure. It can be
enabled on a per-project basis by doing CONFIG += ltcg or by passing
-config ltcg to qmake's command-line.
Change-Id: I52cf99f1ed9f1701e23a3b457ba3502fd28126ce
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Since version 3.2, clang warns about unused member variables
(-Wunused-private-field). Marking such members with
Q_DECL_UNUSED_MEMBER will silence this warning.
This is a cleaner way than using Q_UNUSED() somewhere in the class
methods (like we did previously in qloggingcategory.cpp). It
mirrors Q_DECL_UNUSED for unused variables, which however can't be
used unconditionally for member variables because e.g. gcc will
complain.
Change-Id: I2afff683a7c3bae3bdcd684e5085a643887bb2a0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: hjk <hjk121@nokiamail.com>
Replace QString::fromUtf8 with QString::fromLatin1 for ascii strings.
Also optimize use of QT_VERSION_STR.
Change-Id: I13c683499c56cb4ac4d2bbd9b6b53c337917e347
Reviewed-by: hjk <hjk121@nokiamail.com>
Passing this flag to QFileDevice::map() will allow writes to the mapped memory
without modifying the file that was mapped. These writes will be lost when the
memory is unmapped.
Change-Id: I7d46b044fc370585de8c06fdb4059f1f1be12d7d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
io\qloggingregistry.cpp(134) : warning C4267: 'argument' : conversion from 'size_t' to 'int', possible loss of data
io\qloggingregistry.cpp(138) : warning C4267: 'argument' : conversion from 'size_t' to 'int', possible loss of data
io\qloggingregistry.cpp(142) : warning C4267: 'argument' : conversion from 'size_t' to 'int', possible loss of data
Change-Id: Ic9787aa8acb5cb4440c62bbb143f7c2b7fdad385
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
In Qt 4, the default font for unrecognized font families would
be MS Shell Dlg 2, which is an alias for the default UI font on
the system. However, QFont::defaultFamily() had not been updated
to match this and would return MS Sans Serif instead, which was
the default UI font on Windows 9x. This is a raster font and not
really suitable for modern UIs.
In Qt 5, the problem with defaultFamily() was fixed, but Arial would
be returned as the default instead.
Enter change afd6313755 which tried
to revert the change to defaultFamily() and return MS Sans Serif
again. However, since it changed the actual default family and not
just the one returned by the function, this broke several tests
which depended on having a scalable default font.
This change sets the default family to MS Shell Dlg 2 like in Qt 4.
The fact that defaultFamily() now reports the actual default is
regarded as a bug fix, so we will not change this. Fixes some
XFAILs in qtdeclarative.
[ChangeLog][Windows] Set default fallback font to MS Shell Dlg 2
instead of Arial.
Task-number: QTBUG-39961
Change-Id: Ib08dfc7f2c00475d54d565bb933d1d2f8a3a3d90
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Make sure that the source the rules are loaded from is printed before
any syntax errors.
Change-Id: Id7ced1a346dd0d8501eab93ac00e1f432ca6b703
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: hjk <hjk121@nokiamail.com>
Uninstall option will uninstall the test afer has been executed.
It is useful when you are using your own phone to execute the tests.
Change-Id: I2a3f6c3a93099d70c98f9ce059da22c409b55843
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
currently there isn't a clean solution yet to support object files
or architecture specific files during the preprocess step when
using the xcode generator.
This fixes ios resources (but will break with large resources).
Task-number: QTBUG-39835
Change-Id: If620ab0c3b5c1f92db8f7b4740061c807730db57
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
The additional QScreen can not be used for anything yet, since we don't
set up a window and root view controller for it.
Change-Id: I335b796bdd89fc58a27ec4e20c5ed355be0cab66
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
We were implicitly including OpenGLES/ES2/glext.h prior to iOS8.
Change-Id: I353badb5c209b9ebc57c1718223c164590705064
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
When running unscaled on a high resolution display, some items
are too small. This patch converts most values returned by
QFusionStyle::pixelMetric() via QStyleHelper::dpiScaled(). Some
adjustments have been done to RadioButton, CheckBox, Slider and
SpinBox.
On systems with 96dpi, FusionStyle should still look exactly as
before this patch.
Task-number: QTBUG-40277
Task-number: QTBUG-38858
Change-Id: I2683a8a4db615d01c08f4d6f559417b995c0eb1a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Most compilers out in the wild still don't support the flag, so we need
to compare the version number anyway. This also makes it ready for
whenever compilers start supporting -std=c++14, something we should fix
for C++11 too.
It overrides the CXX11 variable for two reasons:
1) we reuse the mechanics in c++11.prf
2) we avoid c++11.prf overriding the flag if qmake decides to process
it later (CONFIG += c++14 is additive)
Change-Id: I79b6523fd9017483f2474634d1c09f2fd5ea039d
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
