Now that QStringConverter can handle non UTF encodings through ICU,
add a way to get a decoder for arbitrary HTML code.
Opposed to QStringConverter::encodingForHtml(), this method will
try to create a valid string decoder also for non unicode codecs.
Pick-to: 6.4
Change-Id: I343584da1b114396c744f482d9b433c9cedcc511
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
According to https://www.w3.org/TR/REC-xml/#NT-Char unicode characters
within the range of [#x10000-#x10FFFF] are considered to be valid, so
fix the check for valid characters accordingly. This requires changing
the loop over the input QString to iterate over code points (instead of
code units).
Fixes: QTBUG-104362
Pick-to: 6.4 6.3 6.2 5.15
Change-Id: I7dcf5cad05265a54882807a50522d28b647e06ee
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
When assigning the lambdas directly to a function_ref their lifetime is
limited to that of the expression. Store them on the stack first to
avoid the UB.
Fixes: QTBUG-104419
Pick-to: 6.4
Change-Id: I3c85ac683b0bd7768b646dc9d0a1ed4dd173e6f3
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
QGraphicsItems may override itemChange to prevent certain attribute
changes. Overriding ItemSelectedChange this way is explicitly documented
to be allowed.
However QGraphicsScene::clearSelection did not test whether items were
in fact deselected after the call to setSelection, and always cleared
the stored set of selected items.
Fix this by checking the actual selected state of the item as we iterate
over them, and store those items that are still selected in a set that
becomes the new selectedItems set (which will be empty if no item
overrides, which is the default).
Add a test that also checks that clearing the selection emits the
selectionChanged signal correctly (and does not if all selected items
block being deselected).
Fixes: QTBUG-85474
Pick-to: 6.4 6.3 6.2
Change-Id: I665afc132876e02e6e1061b7be37f4f6e4be418f
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Set it to nullptr on clear, and deal with possibly null bindingStatus.
Task-number: QTBUG-101177
Task-number: QTBUG-102403
Pick-to: 6.4
Change-Id: I66cb4d505a4f7b377dc90b45ac13834fca19d399
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
We missed the terminating ";" in the QSKIP lines.
Amends ea4d6b987a
Pick-to: 6.3 6.4
Change-Id: Ibda43b8a84230c243dbcc74e157f4c3f8ef3891d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Thread termination might prevent stack unwinding, which then
generates ASAN errors such as
ERROR: AddressSanitizer: stack-buffer-underflow on address
0x7f3c1d7858b0 at pc 0x7f3c243d8918 bp 0x7f3c1d7857f0 sp 0x7f3c1d7857e8
Skip such tests so that we can enable blocking CI runs under ASAN.
Fixes: QTBUG-104421
Pick-to: 6.4 6.3
Change-Id: I169235a12190e3f72525cddfe1a44a4bee19eca1
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This adds support for additional codecs to QStringConverter when ICU is
available.
We store the converter in the state (d[0]), and its canonical name in
d[1]. We need the name there, as in the clear function we close the
UConverter, and set the pointer to null. Consequently, the actual
conversion functions might need to re-open the converter again. The
advantage of this approach is that clear is used in the destructor of
State, and with this approach we properly clean up the state.
There is however a disadvantage: The clear function was so far also used
for resetting the state when QStringConverter::resetState . Discarding
the whole Uconverter for that is however rather costly. For that reason
we modify resetState to call a new function, State::reset. For existing
converters, it behaves the same as clear; for the ICU based converter,
we call the more efficient ucnv_reset. Code compiled against Qt 6.4 can
benefit from this more efficient version; code compiled against older Qt
versions will continue to work, as the conversion functions can just
recretate the converter from the name.
We can distinguish between ICU and non-ICU converters by checking if the
UsesIcu flag is set.
QStringConverter::name is changed to return the name stored in d[1]. The
interface of the ICU converter has a dummy name, so code using the old
name function from QT < 6.4 still returns something, namely a message
asking the user to recompile.
The function is moved out of line, as we need to check for the private
ICU feature, and want to avoid having that check in the public header.
As the QStringConverter ctor taking a name now can allocate memory, it
can no longer be noexcept. Removing the noexceptness is safe, as it was
only added after Qt 6.3.
Note that we cannot extend the API consuming or returning Encoding, as
we use Encoding values to index into an array of converter interfaces in
inline API.
Further API to support getting an ICU converter for HTML will be added
in a future commit.
Currently, the code depending on ICU is enabled at compile time if ICU
is found. However, in the future it could be moved into a plugin to
avoid a hard dependency on ICU in Core.
[ChangeLog][Corelib][Text] QStringConverter and API using it now
supports more text codecs if Qt is compiled with ICU support.
Fixes: QTBUG-103375
Change-Id: I7afb92fc68ef994179ebc7a3aa73beebb1386204
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When QWidget::resize() is called on a maximized or minimized QWidget,
the window state of the widget and the corresponding QWindow is not
updated (i.e. remains maximized or minimized).
This patch updates the window state to Qt:WindowNoState when
setGeometry() is called in QWindowsWindow or QXcbWindow.
A test is added in tst_QWidget.
Fixes: QTBUG-104201
Pick-to: 6.4
Change-Id: I07491fb9293d13509573fc403750da0a50f6a785
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Restoring the toolbar state of a QMainWindow could not update
QWidgetPrivate::widgetItem for the QToolBar, because at that point it
was still holding the pointer to the widgetItem of the previous state.
Later on, when the new state was successfully applied, the previous
state was deleted, and the corresponding widgetItem was reset to
nullptr.
This patch explicitly resets the QToolBar's widgetItem while updating
the state, so that it is later correctly updated while creating a
new QWidgetItemV2.
Fixes: QTBUG-102395
Pick-to: 6.4 6.3 6.2 5.15
Change-Id: I17613d62423edcc0faf85ecb0a714865a50d87e8
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It was previously understanding them as character literal delimiters,
with unfortunate consequences if a numeric literal contained an odd
number of them. Recognize that an apostrophe with a digit on each side
of it isn't the opening quote of a character literal (unless the digit
before it is preceded by a u). Extend the findMocs test to trigger the
bug, prior to the fix; verified it passes with the fix.
Fixes: QTBUG-98845
Change-Id: I5db3ac59aaeade7c2d6c1fb680ba97261ec0e8a9
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
QComboBox uses QPersistentModelIndex to store the current index of the
underlying model. When the model is cleared, that index is automatically
invalidated, so calling QComboBoxPrivate::setCurrentIndex(QModelIndex())
does not result in signals being emitted, because we do not detect the
index change.
This patch uses indexBeforeChange to detect such situation and emit all
necessary signals.
Fixes: QTBUG-103007
Pick-to: 6.4 6.3 6.2
Change-Id: I29326830a30a17900839e8d1737a08bd940081ea
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Work around https://gitlab.freedesktop.org/mesa/mesa/-/issues/5875 by
treating the driver as broken when both the driver and device UUIDs
are all zeroes.
Fixes: QTBUG-104231
Pick-to: 6.4 6.3 6.2
Change-Id: Ibf7973361d472ebb1cb433bc61b50b2828f75c6b
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
If a window becomes active, then the accessibility system gets informed
about that already. Qt puts focus on the focus child of the activated
window afterwards, and if this emits another accessibility event, then
accessibility clients like Windows Narrator will stop reading the
activated window, and instead read about the focused widget.
This makes dialogs like message boxes poorly accessible.
Accessibility clients already know that a window became active, and can
query Qt about the focused child within that window.
Amend test case.
Fixes: QTBUG-101585
Pick-to: 6.4 6.3 6.2
Change-Id: I2d6bff7c415a6f29c4a4f7f4e4be38079fb976ca
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
QMessageBox has text values that an accessible client should be able to
read directly without having to navigate through the text labels.
Add test coverage.
Windows Narrator is inconsistent in reading the contents of a message
box. It might skip them completely, even though the text property is
read through the interface.
Task-number: QTBUG-101585
Change-Id: I639c2210a627733c093743790c6a6b83f4bb80d0
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
The only way to use them was to put them in a union and then write all
the members of the union to set the various bit ranges. As only one
member of a union can be active at any time, the compiler is free to
optimize those writes away, though. This has started happening in the
wild now.
As we have a replacement, we can remove the old and broken code now.
Task-number: QTBUG-99545
Change-Id: I90718ec06662258d1c15220f54da9eed2186c5a5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This renders these simple tests ASAN and LSAN (Address Sanitizer
and Leak Sanitizer) clean.
Change-Id: Ibe5b7054a20c1575a1a7939b0bed4101afeeee56
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Found by codespell
Pick-to: 6.4
Change-Id: Ie3e301a23830c773a2e9aff487c702a223d246eb
Reviewed-by: Nicholas Bennett <nicholas.bennett@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The QDateTime benchmark's toMSecsSinceEpoch() and
toMSecsSinceEpochTz() each iterated the 2010s and had 1950 and 2050
variants for two other decades. I want to also test some earlier
decades and do similar for create(), so combine the existing triplets
as three rows of a data-driven test for each triplet, add the new rows
and apply the same to create().
In the process, turn an enum used for qint64 constants into a set of
constexpr qint64 declarations.
Pick-to: 6.4 6.3 6.2 5.15
Task-number: QTBUG-104012
Change-Id: I2657346b65d96a7ef7503cd33c870b688ea5dbff
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Enable by setting QT_WIDGETS_HIGHDPI_DOWNSCALE=1 and QT_WIDGETS_RHI=1.
This will make the backing store and painter operate at the next
highest integer DPR in cases where QWindow::devicePixelRatio() returns
a fractional value. The backing store image will then be downscaled
to the target DPR at flush time, using the RHI flush pipeline.
[ChangeLog][QWidgets] Added experimental support for always
painting at an integer device pixel ratio (rounding the DPR up if
necessary), followed by a downscale to the target DPR.Enable by setting
QT_WIDGETS_HIGHDPI_DOWNSCALE=1 and QT_WIDGETS_RHI=1.
Pick-to: 6.4
Task-number: QTBUG-86344
Change-Id: Id5b834a0e3499818b0b656161f5e0c38a6caa340
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
This reverts commit b9cce12e76, which
broke
function_ref<void(int)> f = [](int i) { return i; };
ie. swallowing of return types.
We could maybe implement the same without invoke_r, with the same
manual if-constexpr that invoke_r has, but it would be a pointless
duplication across the two thunks we have, so just use invoke_r.
Add tests.
Pick-to: 6.4
Task-number: QTBUG-103739
Change-Id: I6034f05d813c06a25e8058ded5b6b62f3ca858b4
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
We implicitly checked it, because, in C++20 builds, the non-equality
relational operators are synthesized from it by the compiler, and we
test those, but we didn't check that <=> returns strong_ordering.
We now do.
Pick-to: 6.4 6.3 6.2
Task-number: QTBUG-104108
Change-Id: Ieb19a2d4cb2d600d884f4e2e89e98c6187e23872
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The code incorrectly tried to ensure that the firstVisible tab was a
valid index, even though there might not be any visible tab left after
removing the last visible tab.
The same logic didn't exist of the lastVisible tab, so we tripped the
assert in qBound, as max (being -1) ended up smaller than min (0).
Fix this by removing the wrong correcting of firstVisible to be always
valid. Make sure we emit currentChanged with -1 when no visible tab is
left after removing the current tab.
Add a test.
Fixes: QTBUG-104003
Pick-to: 6.3 6.2
Change-Id: I27e6438a02d0a0f1ac4d0e0160cee4f33b3f3766
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
More specifically, if either minimum or maximum size are updated, make
sure that the current window geometry is updated so that it is within
the minimum and maximum sizes.
Previously, these constraints was only respected by the window manager
when the user resized the window.
For widgets this already worked, because a top-level widget will take
care of respecting these constraints if they are changed.
Since QWindow::setMinimumSize and QWindow::setMaximumSize started to
share so many common things, a new function (setMinOrMaxSize_helper())
is added.
Task-number: QTBUG-102771
Change-Id: Ia4b2680dcf865f84a3cf6424187f9a6036b76386
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
If we replace the bullet character with a UC checkbox character, it
looks ok in a browser, and the HTML parser can recover the BlockMarker
attribute from the css class.
[ChangeLog][QtGui][Text] Checkbox list items can now be read and written
in both HTML and Markdown, including conversions.
Task-number: QTBUG-103714
Change-Id: Ic6b74512075cd4ac16d6f80fdf55b221447491a9
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
It would not compile on my Linux box due to using QVariantMap, but not
actually including QMap itself. Using gcc 9.3.1 on CentOS 7.
Pick-to: 6.3 6.4
Change-Id: I808a270c814a906030cb34b197d3a2a85ba384e1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jesus Fernandez <jsfdez@gmail.com>
On finishing/terminating a thread, when processing posted events,
we need to consider QThread's own data instead of caller thread's data.
Otherwise we can get into unexpected situations such as double
destruction of an object, premature destruction, etc.
Fixes: QTBUG-103922
Pick-to: 6.4 6.3 6.3.1 6.2 5.15
Change-Id: Idf77221ebbaa0b150ee2d0c296b51829ae8dc30e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's easier to remember what "SIGSEGV" means instead of "11".
GNU libc has offered sigabbrev_np() (non-portable) since 2.32; for older
libcs, we'll be happy with a hardcoded list.
Selftest updated to match... though it didn't seem to be necessary.
Pick-to: 6.4
Change-Id: I5ff8e16fcdcb4ffd9ab6fffd16ebc66ecf6e9465
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Two patches applied to upstream release.
Pick-to: 6.4 6.3 6.2
Fixes: QTBUG-103732
Change-Id: Id64b65c4567433806047a2a34fa85ab5f260e6cc
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Skipping moveToTrash() test is needed because WebOS
does not implement a trash bin directory.
Fixes: QTBUG-104053
Pick-to: 6.4
Change-Id: Id1d1595eb401d8ef3a403c915d95be1cd75368d2
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This implements the recent functionality extension of painting
cosmetic (untransformed) brush patterns, and the corresponding
NonCosmeticBrushPatterns render hint, in the pdf and opengl paint
engines.
As part of the implementation it also fixes a couple of pre-existing
bugs in the opengl engine, relating to updating the brush after
changes in transformation or brush origin.
As a driveby, it also includes a minor fix for the lance testing tool:
request stencil buffer, as that is needed and not always provided by
default. This echoes a recent fix done to tst_baseline_painting.
Change-Id: Ia8811477e015eebeb40ed138bca96643ce1ab0dc
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Let it to be deduced, otherwise it may force instantiations which
are ill-formed.
Change-Id: I3ce674128d96a48ad6883e265734ff330645dd75
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Both QtWeSockets and QtHttpServer has a QSslServer class that is useful
elsewhere. They are different though, so the new class has features
from both versions.
[ChangeLog][QtNetwork] Unify QSslServer from QtWebSockets and QtHttpServer into QtNetwork
Task-number: QTBUG-100823
Change-Id: I523f04db39297ceb9b258f673eb12deecfc6886c
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The new signal pendingConnnectionAvailable is emitted after a new
connection has been added to the pending connections queue. Connect
to this signal and call nextPendingConnection to handle incoming
connections.
The existing unchanged newConnection signal is emitted after the
overridable function incomingConnection is called, regardless of whether
a new connection is added to the pending connections queue in the
incomingConnection function or not.
If a subclass that overrides incomingConnection either decides to not
add all incoming connections to the pending connections queue, or to
postpone adding the connection until a handshake is successfully
completed, the pendingConnectionAvailable signal should be to used,
because this signal directly corresponds to insertions to the pending
connections queue.
[ChangeLog][QtNetwork][QTcpServer] New signal pendingConnectionAvailable
is emitted when a new connection is added
Task-number: QTBUG-100823
Change-Id: I00c76761389065f68271553e69e6c45c393a2fa8
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
[ChangeLog][QTestLib] QCOMPARE now evaluates toString() on its
arguments lazily, speeding up the general case where the comparison
doesn't fail. This is true for the QCOMPARE functionality provided
by Qt. If you specialized qCompare() for your own types, then you
need to change its implementation in line with Qt's own qCompare()
specializations in order to enable this feature.
[ChangeLog][QTestLib] QCOMPARE calls with nullptr argument(s) will
now print the actual and expected values upon failure.
Previously it was not like that because of the compareHelper()
overload in qtestresult.cpp that treated the presence of
nullptr-arguments as a reason to ignore formatFailMessage() call.
New implementation does not have this check, and correctly
executes formatFailMessage() for all arguments.
Note that the qCompare() overloads that call QTestResult::compare()
internally were not affected by this patch, because they already
defer toString() invocation until the comparison fails.
Some numbers, collected against shared release developer build.
I checked how this change affects the test execution. The idea was
to pick some tests for types that do not have a specific
QTestResult::compare overload, so I picked a couple of QByteArray
tests.
The comparison is done by running a test 10 times and taking the
average execution duration, as reported in the log.
tst_qbytearrayapisymmetry:
Before: 15.6 ms
After: 14.2 ms
tst_qbytearray:
Before: 41 ms
After: 36 ms
The benefit is around 9% and 12% respectively.
Fixes: QTBUG-98874
Change-Id: I7d59ddc760168b15974e7720930f629fb34efa13
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
This allows to defer the toString() invocation until it is really
needed, and so allows to speed-up the test execution.
I was testing a release shared developer build, running
tst_QStringApiSymmetry 10 times before the change, and 10 times after
the change, and then taking the average execution duration, as
reported in the log.
Before the change (using QCOMPARE): 51ms
After the change (using QCOMPARE_EQ): 45ms
As we see from the results, the benefit is around 10%.
Task-number: QTBUG-98873
Task-number: QTBUG-98874
Change-Id: Ifcfbcca1f2c1eaf82c7f1a9098fa1512a269cbf8
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
[ChangeLog][QTestLib] Add QTRY_COMPARE_{EQ,NE,LT,LE,GT,GE}_WITH_TIMEOUT
macros that repeatedly execute QCOMPARE_{EQ,NE,LT,LE,GT,GE} until either
the comparison returns true or the timeout expires. Also add
QTRY_COMPARE_{EQ,NE,LT,LE,GT,GE} macros that simply invoke the
*_WITH_TIMEOUT versions with the usual timeout of five seconds.
Task-number: QTBUG-98873
Change-Id: Ib0d7d1c8c997f442b46acd85da738a8f512cc875
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
[ChangeLog][QTestLib] Add QCOMPARE_{EQ,NE,LT,LE,GT,GE}()
macros. These new macros behave similarly to QVERIFY(a op b),
where 'op' is ==, !=, <, <=, >, >= respectively, but print
a formatted error message with argument values in case of failure.
The formatting is done lazily, which means that the strings will
be generated only when the comparison fails.
Also add a new test for tst_selftest and generate expected output
for it.
Fixes: QTBUG-98873
Task-number: QTBUG-98874
Change-Id: Ic8074798901d7a469b1f58d5cd28bbf49a3da1db
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
