some omissions from the com.trolltech => org.example replacement.
Change-Id: I078c272fc3729fc7b9e9cd3e6ede7c21f0386b62
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Under Windows it's quite possible that OpenSSL, DBUS or MySQL is
not installed into a central place. If -I and -L is
passed at configure time, it is added to all targets,
and if that path contained a conflicting header things would go
wrong.
Change-Id: Ic3338c49aa6eaa91b3abf5341e709ef604bf7aab
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Store the result in a temporary QByteArray and continue
working with that one.
Change-Id: I24bc243f0f3dfb37d840faf7592b3383bd37c7e2
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These are better generated by the compiler.
Change-Id: I5afa9fd17997c220622ed0e5990c33e52700840f
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is consistent with QAbstractButton, QCalendarWidget,
QDialogButtonBox and QGroupBox (ie, all other widgets with
a clicked signal)
Task-number: QTBUG-26105
Change-Id: Ieafe988b5c03216796b69a7cd70ac1a03fc12b0a
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
this does the same as PKGCONFIG, only that the libraries end up in
LIBS_PRIVATE, not LIBS, which means they don't end up in prl files.
in the vast majority of cases, the user should use this new variable.
Change-Id: Icb57a1166f1896f51284c64e4047cfc79410e73a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
this is handled the same way as the QT variable, only that the actual
libraries end up in LIBS_PRIVATE, not LIBS, which means they don't end up
in prl files.
the handling of the two variables is entirely independent, including
independent dependency resolution, so some libraries will typically end
up twice on the linker command line. this is not a problem.
Change-Id: I257ad0d414bf273c08a7bd6a874fe9ddb7356009
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
otherwise the second installation on unix would be bogus.
Change-Id: I162533ee262c6820e7e2d4710b5342cafecd9d59
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this is in fact a shell-related flag, which determines how QMAKE_DIR_COPY
is assumed to behave.
Change-Id: If774f8a83b40c9ae7107c8e7ef7263af8a2e6c6e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
we just determined that the file does not exist, so it's entirely
pointless to query its type from the file system. consequently, the
respective fallback branch would assume a regular file anyway.
Change-Id: I42590ffc2a5f650fb430a9398cb1859217ed4350
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the value is still re-processed numerous times, end each "exit path"
does own escaping, while not every path can deal with an escaped path.
Change-Id: I0bf4a043809bf4b7877d02e5d8dfe8f794a7dd00
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
QDir::relativeFilePath() doesn't do anything if the path is already
relative, so make it absolute first to force a re-calculation.
the cleanPath() is gone, as relativeFilePath() already does that.
Change-Id: I8f4d0d839db3fe99a608f70916b4b5bd52c56535
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
If QWindow::setGeometry() is called before QWindow::create(),
QKmsWindow::setGeometry() is not called at all. This is wrong
because there is some special size restricting happening there
which must never be skipped.
Change-Id: I321632d4fdb327b0a75e6791c019b3f4c2793888
Reviewed-by: Elvis Lee <kwangwoong.lee@lge.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@nokia.com>
When qdoc finds a .qdoc file in an exampledirs directory,
it only adds it to the source list if it isn't already in
the source list. This may be overkill, but it's safe.
Change-Id: I2c5714c968f06e90f9b29b3a5481f80469e19ced
Reviewed-by: Jerome Pasion <jerome.pasion@nokia.com>
If glXCreateContextAttribsARB does not succeed or is not available,
we should fallback to using glXCreateContext. But we should not just
create a context with glXCreateContext by default that is being thrown
away if glXCreateContextAttribsARB succeeds.
Otherwise glXMakeCurrent with context 0 might cause an unexpected
context change when dealing with multiple contexts.
Change-Id: I7627abbe2500b4006180653a1b3b074fe7aca1d3
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Moreover, exporting it causes the horrible side-effect on Windows
(with MSVC) that the compiler will not inline the functions, but
instead will place indirect calls to the functions in QtCore DLL,
even in release mode. For such a critical piece of code, inlining
is necessary.
Change-Id: Ib31c12f6bf8dc8ece1b51824716a480559753c24
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
This is so we can insert valgrind (helgrind) annotation macros. They
require the actual address of the variable to work.
Change-Id: I988f6a46385ad58143c53ad34b6cf0f58be2cdb8
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This can't realisitically be unit tested.
Task-number: QTBUG-26305
Change-Id: If7f56c44c472ff0ffbda4744b76ed2119bb64bf8
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Previously, a QVariant parameter would be wrapped inside a new
QVariant, and you would have to cast the QSignalSpy's QVariant to
a QVariant to get the actual value. This behavior was unintuitive
and undocumented.
Check if the parameter type is QVariant, and copy it directly if it
is. This makes the QSignalSpy's QVariant directly usable (no need to
"unwrap" the value in user code).
Existing tests that use QSignalSpy together with QVariant parameters
(such as tst_QPropertyAnimation::valueChanged()) and do cast the
QVariant parameter to a QVariant, continue to work after this change;
this is because qvariant_cast<QVariant>() returns its input value
(unchanged) when the type is not QMetaType::QVariant.
Task-number: QTBUG-21645
Change-Id: Ibfb171edd60c0d3f7ca1d5419e5c5f3d0380d5b3
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
There was a race where QGuiApplicationPrivate::processMouseEvent accessed
QWindowSystemInterfacePrivate::windowSystemEventQueue without holding
QWindowSystemInterfacePrivate::queueMutex.
There was a memory leak where QWindowSystemInterfacePrivate::windowSystemEventQueue
would not delete events contained in it when it was destroyed.
Fix both of these by properly encapsulating the QList/QMutex pair
in a small class, WindowSystemEventList, that allows only properly protected access
to the internal QList and calls qDeleteAll() in its dtor.
Change-Id: Ifaa9968c9272096df2f7109a7a6cf1c8e5fa736c
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
Those are defined below, after the list that describes the macros and
the papers.
Change-Id: I1f2df0e33c84eb17ebbb0147662f560defed182c
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
This allows code using methods marked Q_DECL_NOEXCEPT to benefit from
optimisations before MSVC supports the C++11 keyword. Even MSVC 2012
doesn't have it yet.
Using throw() in other compilers is not a good idea because they might
actually be implementing the C++ standard -- which is broken.
Change-Id: Id07ab4fe40a641583d5285d5abb536998bc419ba
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
QMutexLocker does not support being passed already-locked mutexes,
unless they are recursive mutexes. But in that case, it behaves as if
the mutex weren't locked in the first place.
Since that's the case, there's no point in testing the low bit to see if
it's set or not. It's never going to be.
Change-Id: Ie4b81f7e2cca16e6db36f3cb51a5377dbdfc157d
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The GL_IMG_texture_npot extension only provides partial support for
npot textures in that it allows use of npot textures but it does not
support the GL_REPEAT texture mode (needed for tiling fill modes in the
QQ2 image element).
Adding this new finer-grained feature check allows QQ2 to still use npot
textures where GL_REPEAT is not needed with only the IMG extension
present.
A follow-up commit will make a check for this in qtdeclarative.
Change-Id: Iff3dbdb955fb334d9e32f3abd49e90ff0ed9836c
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
This was a regression caused by acbfb4d777,
causing for instance qdoc to crash.
Change-Id: Id8daa19d467c4f1729e5a5a203a388f16ec4a6de
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
-Simple landing page which contains a link to the SQL guide and API.
-Gave a new title to C++ API page.
Change-Id: I54eca4f6933bafa0affd5825e7fe2e1a2522dad0
Reviewed-by: Geir Vattekar <geir.vattekar@nokia.com>
Make the test behave in Jenkins similarly as it behaves in Pulse:
- a test run in Jenkins is not an ad-hoc run
- the JENKINS_HOME environment variable implies we are running in
Jenkins
- the GIT_BRANCH environment variable, set by the Jenkins git plugin,
is equivalent to PULSE_GIT_BRANCH
- there is no equivalent to PULSE_TESTR_BRANCH, since testr is no
longer used
Change-Id: I89ffeec659b4adaab309d8b93ad793ce640029c7
Reviewed-by: aavit <qt_aavit@ovi.com>
Using a reference changes the value of oldState within this function,
which is undesired.
Change-Id: I9fb66e488015d6b3e586ffa2f0b05a40c095e16b
Reviewed-by: Christian Kamm <christian.d.kamm@nokia.com>
When using [ ] for tests in shell scripts, the ending ] must be a
separate parameter. Otherwise, it won't work. configure was reporting:
configure:5918: ']' expected
Change-Id: I38a843356ee0feb97edb8692a828306821045c77
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
qdoc was mistakenly assuming that the output
was going into subdirectories. The base dir
variable was not being tested.
Task nr: QTBUG-26638
Change-Id: I9b331926f8954b58102f75fad3f233eaebb2bb4d
Reviewed-by: Jerome Pasion <jerome.pasion@nokia.com>
qmake -project was always outputting a project with subdirs template, because
Option::h_moc_mod was not being properly read, causing addFile() to misbehave.
Change-Id: I2c07aea132f9885eabf188de993b0fabfb352886
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
configure will now run qmake without -recursive, as on modern systems
one can get a lot more out of parallelization done by make, which qmake
cannot do.
use -fully-process to get back the old behavior. -dont-process is
unchanged.
Change-Id: I2874321a963175463ae8992f3ab2b01bc13c9922
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
i think this was a vestige from the old wince build proces
Change-Id: I13305de627c65fc1c93ba6d2383557ff5ea7a147
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Fixed crash when resizing a scroll area with a native viewport
(typically a QGLWidget) causes the scroll bars to get hidden, while
there are still expose events in the queue for the scroll bar widget.
Task-number: QTBUG-26746
Change-Id: Ia77c8eb32a6730670333120af3f9a772c64807f1
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
In the case of a file dialog with a completer, the completion list view
is a popup that is not a transient child of the file dialog. Thus it
ends up getting its blockedByModal flag set due to the file dialog
window being a modal window.
To prevent this we make sure popups don't get blocked by modal windows,
as they were special cased and processed before modal windows in Qt 4.x.
Change-Id: Id5688cfb1534541cd1678b1e53d75e34a68f9b8e
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
enum values in the Qt namespace were being printed
as. e.g.: Qt::Qt::AlignLeft. This was due to the
presence of a collision node that was not handled
properly.
Task nr: QTBUG-26628
Change-Id: I54adaba72410b2838f0922f181846bb7e76b61d4
Reviewed-by: Jerome Pasion <jerome.pasion@nokia.com>
This function is called in OOM situations and when other exceptions
are still in flight, so it really shouldn't throw, indeed.
Change-Id: I50cda699ffd74f3710c3bafd15af356ff410bc47
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
