In qatomic_cxx11, the 'Type' is std::atomic<T>, whose fetch_add method,
used in fetchAndAdd*(), already does the right thing for T* with sizeof(T) > 1.
The code, however, applied 'AddScale' to the 'valueToAdd', thus becoming
incompatible with normal pointer arithmetics.
This is very apparent when one goes to the length of actually testing
qatomic_cxx11 with tst_QAtomicPointer (which is non-trivial, since the
-c++11 configure option currently doesn't have an effect on tests/auto).
To fix, remove the AddScale factor.
Change-Id: I7507203af3b7df31d8322b31a6a1a33ca847d224
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The read from 'owner' for comparison with 'self' in QRecursiveMutexPrivate::lock()
is not synchronized with the write to 'owner' in the same function further down,
and neither operation is atomic.
Fix by making 'owner' an atomic pointer.
Change-Id: I186b88575589da0dce5827a1e17ceb4ce599ed02
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The existing code performed a downcast from QObject* to QAbstractAnimation*
at a time when the former QAbstractAnimation only is a QObject anymore.
The comment indicates that this was understood at the time of writing (or
else a little later), but it drew the wrong conclusions.
Statically downcasting a type whose dynamic type is (no longer) of the
target type is undefined behavior.
This change fixes the code to (implicitly) cast _up_ to QObject and
compare at that level.
Says Clang:
src/corelib/animation/qanimationgroup.cpp:278:33: runtime error:
downcast of address 0x000002966ab0 which does not point to an object of type 'QAbstractAnimation'
0x000002966ab0: note: object is of type 'QObject'
00 00 00 00 80 d7 e6 d7 88 2b 00 00 70 7b 96 02 00 00 00 00 61 00 6e 00 6e 00 6f 00 21 00 00 00
^~~~~~~~~~~~~~~~~~~~~~~
vptr for 'QObject'
Change-Id: I51d6277020d0ff32cd7b80a8cddcf2cda1a626a6
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
ARGS already exists, but is a flattened list of the arguments, so both
foo(bar, baz) and foo(bar baz) will give count(ARGS, 2), making it
unreliable for validating arguments to qmake functions.
Change-Id: I0bcc16614c64000169431327da48fd1a26708e67
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
A bunch of empty and never-to-be-used directories makes the build tree
noisy and harder to navigate.
Change-Id: Iebef91c82d58a8d6a0047fb5439d50eb6806f557
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
There was a mismatch of how we sanitized paths for dependencies of the
target and how those dependencies were sanitized (or not sanitized),
resulting in the target depending on 'some/path/foo.o' while the
extra compiler target was named 'some/path//foo.o', with an extra
slash. This confused 'make' enough to decide that it didn't know
how to build the dependencies for the target.
Change-Id: I181b86c291286cbbbb1f7b4c3b929a5f1dc163a3
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The pattern ${QMAKE_ needs to be at the beginning of the line, or not
start with a $ (which would make it a regular qmake variable).
Also, it's fine that the variable is of the QMAKE_VAR_foo type, as
these variables are resolved at generator time, but are constant
and do not depend on the inputs. This means we have to replace
extra variables in the output.
Change-Id: I21ad24ae770f2137e2d5d92a20ee54e2f3f4ca06
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Similarly to how it's done in xcb. And add support for eglwindow since
the WId will soon once again cease to be an EGLNativeWindowType.
Change-Id: I0e3b86a21179439821550c9423f0e747ccae5897
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Reviewed-by: Andy Nichols <andy.nichols@digia.com>
On the BlackBerry platform when an application is minimized an
alternate cover window is shown. This patch allows Qt to render
into those windows.
A new window type "Qt::CoverWindow" has been introduced.
Change-Id: If5e321f5cb00f6d3ed7a5dc0af425655d7a9253a
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
QCompleter::setFilterMode(Qt::MatchContains) will enable filtering
out entries that contain typed characters in any place, instead of the
default behavior when only those entries that start with typed characters
are displayed. Qt::MatchEndsWith is also possible.
QCompleter::setFilterMode(Qt::MatchStartsWith) will bring the default
behavior back.
Task-number: QTBUG-3414
Change-Id: I3845704c59eb8fc401e9a650c54a9c934ed28c2e
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
The compiler complained that the specialization was required
before it was issued. Fixed by moving it up to the others
near the top of the file.
Change-Id: I0ae162a5db5ef29f24cd1d32285a1870fdd24b9b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Found by tst_QLinkedList once compiled in C++11 mode.
Change-Id: Idbf79d775c5271437dbb99c1c8cc7a2e8a7f08bf
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This fixes the build breakage caused by Change I50b33d05 when attempting
to compile on Linux with session management enabled but libSM and/or
libICE not present.
Change-Id: I127f32e7041deb2ff968eae8458fee7d4e95d7a5
Reviewed-by: Samuel Gaist <samuel.gaist@edeltech.ch>
Reviewed-by: Bernd Weimer <bweimer@blackberry.com>
Reviewed-by: aavit <eirik.aavitsland@digia.com>
When warnings are treated as errors, no Android code will
compile, since one of the platform headers in the NDK triggers
the literal-suffix warning. So we need to mark this as no-error.
Change-Id: Icabf1c2f2d32f76ee157d04e62a28f83abeed8f1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If you specify ANDROID_API_VERSION to override the default
API versions used for building the jar files, this should
take precedence even when the .pro files specify a different
default API version (like QtAccessibility does when it sets
the default to android-16.) Otherwise it's impossible to
override these defaults.
Change-Id: Idef98aaf3b51490bd7ced8c53770ee2f5680b1db
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
The jniconvenience api is replaces with private API's in core and
public API's in the qtandroidextras module.
Change-Id: Iaf4b4343f8022197e7ec3fdde2406eb3c881208d
Reviewed-by: Yoann Lopes <yoann.lopes@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
This change makes use of the private QJNI api that now exists in QtCore.
Change-Id: Id03664942d6c6cbfec028a3b52729057153a8466
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Merge most parts of the qlogger framework from
git://gitorious.org/qtplayground/qlogger.git
The categorized logging feature is a replacement for qDebug, qWarning and
friends. With logging statements in an app/library, a developer can
turn on the statements they care about and turn off the ones they don't.
Most work for this was done by Wolfgang Beck and Lincoln Ramsay.
Task-number: QTBUG-25694
Change-Id: Ib0cdfbbf3694f86ad9ec553b2ea36f09a477cded
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Some apps may not support printing only a particular page range, but
with CUPS we can do "server-side print range", ie. we can select the
page range for the application.
If CUPS is available, the Page Range widget is now displayed if app
advertises no such capability and page range is selected on the server
instead.
[ChangeLog][QtPrintSupport][QPrintDialog] Added CUPS server-side print
range support for apps that can't support print range option themselves
Change-Id: Ia7784065ba5a8b53bb05ae46e982c718ef672fa5
Reviewed-by: John Layt <jlayt@kde.org>
Move some of the static helper and private functions to better
organize the code. No code actually changed.
Change-Id: I6d5dd6bcb9fc5af56d2dbe9e53bc9f0a000c4fa4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add new method to return if the current time is Daylight Time.
[ChangeLog][QtCore][QDateTime] Added new method isDaylightTime() to
return if the datetime is in Daylight Time or not.
Change-Id: Icb93fd5dd0b2f7d83d2d4643eeb12922c1137e3e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change the datetime serialisation from using QDateTimePrivate::Spec to
using Qt::TimeSpec. Only public classes and enums are now used to
serialise, making the format safer..
Clean up the code to make each version clearer, this duplicates some
code but is easier to read and support.
Change-Id: I3d8fc05f50f8e8acb9edbb992e5ce06063654b8e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When Daylight Time transtion goes from Standard Time to Daylight Time
there is a "missing" hour, i.e. at 2am CET the clock goes forward to
3am. Currently QDateTime ignores this gap and considers the time to be
valid and able to be manipulated. This change respects the transition,
so any time set in the missing hour is considered invalid, and any date
maths returns valid results.
The validity in the current time zone needs to be checked every time
isValid() is called in case the system time zone has changed since the
last time it was checked. This is done by calling mktime to check the
returned result matches the expected result. This could be very
inefficient, but the returned offset value is cached each time so
mktime is not required to be called again within each method call,
effectively meaning mktime is called the same number of times by
each method. Note that this means any new methods added must be
careful to ensure either isValid() or refreshLocalTime() is called
first by any method needing to use the UTC value.
[ChangeLog][QtCore][QDateTime] The Standard Time to Daylight Time
transition for Qt::LocalTime is now handled correctly. Any date set
in the "missing" hour is now considered invalid. All date math results
that fall into the missing hour will be automatically adjusted to a
valid time in the following hour.
Change-Id: Ia652c8511b45df15f4917acf12403ec01a7f08e7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change from storing the date and time as QDate and QTime to a serialised
msecs format. This format is a direct translation of the QDate and
QTime values, it is not the actual msecs since the Unix epoch. This
msecs format ensures we are always able to recreate the original QDate
and QTime values, but should still simplify the code and improve
performance.
Because we no longer store the explicit date and time we need to store
their isNull()/isValid() status separately.
The changes in storage results in the same memory footprint as before.
Note that this change does not optimize the code nor set out to fix the
known bugs, it only seeks to maintain the current behavior, although
some bugs are fixed implicitly. More bug fixes and optimizations will
follow.
[ChangeLog][Important Behavior Changes] The supported date range in
QDateTime has been reduced to about +/- 292 million years, the range
supported by the number of msecs since the Unix epoch of 1 Jan 1970
as stored in a qint64, and as able to be used in the
setMSecsSinceEpoch() and toMSecsSinceEpoch() methods.
Change-Id: I98804d8781909555d3313a3a7080eb8e70cb46ad
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: Ib4bdabcfa4e9b76156d7188da82fe2173b4b997e
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
This avoids the assertion in iaccessible2.cpp(510)
Change-Id: I1a4c007ffcbcda70f0e37ef3cf55a303683b58c1
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
I didn't dig deeper to check where the additional reference came from,
but tracing confirmed that the QSharedDataPointer<QLocalePrivate>::detach()
call is gone with this change.
Background:
QString::vsprintf is used in the logging framework, and as such shouldn't
waste any memory. It's currently anyway unusable from, say, signal handlers,
but this is low-hanging fruit that shaves off one of the dozen or so
memory allocations involved in a simple qFatal() call.
Change-Id: I19fa2148f669dfc7b5f276221151e25a4348cbfe
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
A _WINRT_ macro is added for Windows Runtime and a few codepaths are
changed with it.
Change-Id: I99ca5636d03c39b0a05b7f75f13522d012fdec07
Done-with: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Avoid unsupported Win32 API while providing alternative codepaths for
in-package library loading.
Change-Id: Iaad059d6c94d0347cbaa8d9b9240806afcb29561
Done-with: Andrew Knight
Done-with: Kamil Trzcinski
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
As Windows Runtime does not really support the use
of spawning processes QT_NO_PROCESS is defined for
winrt builds and the corresponding sources are
excluded from build.
Change-Id: I79263417c985b23678c55ac44a5591a9a69d3c13
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Change-Id: I1c9d6904eecd499ca8c2b744e8ac60696f40c20f
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
WinRT supports in-memory file mapping via CreateFileMappingFromApp. This
is unimplemented on Windows Phone.
Change-Id: Ic5692e501cd2fe9e1337829bdeb933fccc804abe
Done-with: Andrew Knight
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
As CreateSemaphore and WaitForSingleObject are
not supported on WinRT their supported alternatives
are used.
Change-Id: I1aa20076e286ed8ae28ba332bbed41ff8ce0feff
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Various global changes, primarily preprocessor flow, to support the
WinRT platform.
Change-Id: I3fa9cf91d5fb24019362e88fcf205e31b4f810b5
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
To be set to false by eglfs and similar platforms where no real window
management is provided.
When this capability is not set, some of the changes done for
QTBUG-26903 will be disabled, allowing dialogs to show up at their
QDialog-chosen place on platforms where no WM is present and so
windows are never repositioned by the system.
Change-Id: If1dac3cd11f2a856913a51277431fe3ec644b719
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
The glyph returned by loadGlpyh() must be freed manually when caching
is not enabled (that is, QT_USE_FT_CACHE is not set).
This change and https://codereview.qt-project.org/#change,65672
together should stop QGLWidget::renderText() from leaking memory
extensively.
Task-number: QTBUG-32792
Change-Id: Iff7e1591a1ea994a97b6a56bc16c64bf544e6713
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Allow widget apps with popups and multiple top-level widgets to
function on the eglfs platform. GL and Quick2 apps are not affected.
Instead of trying to create a native window and EGL surface for each
window, do it only for the window that is created first. This first
window is forced to fullscreen as usual. Later windows however are
treated differently: These will not have a native window, surface or
context, and keep their normal size. All the textures belonging to the
raster windows are then rendered in one step, using a stacking order
maintained based on visibility changes and window activation.
Note that this will only help apps that create a main window first and
have everything else inside that window or on top of it as menus,
dialogs, popups, etc.
Change-Id: Ia435458ba81bf3c35cc8f61bcb2d2a50cf17f0e3
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Reviewed-by: Andy Nichols <andy.nichols@digia.com>
The plugin failed to handle releases with protocol type A with some
drivers. There is no requirement to emit ABS_MT_TOUCH_MAJOR or
BTN_TOUCH to indicate a release. If the point is gone from the report,
it is a release as well.
Change-Id: I9527fbfb200fde3b160148e076357a29bf610427
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Reviewed-by: Andy Nichols <andy.nichols@digia.com>
...and other platforms that do not support WA_NativeWindow.
Task-number: QTBUG-33523
Change-Id: I4ab043e8b3c3369aec41b44275fb3099d90e55b4
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
This reverts commit 04325bdd26.
This change breaks qtdeclarative on Mac.
Change-Id: I77b121cc6b283cf7498e93e4b914d2fb68808ab6
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
