- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: Ie29640451dddeb58342038a8cd5fac152cce39e5
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
Build it only in -developer-build mode for tests that might depend
on exact-matching font behavior.
Return earlier to avoid doing any useless job.
Change-Id: I966ee5689f03403e45f4c957b63e3113f0467803
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: I624deb320c378c18a29b3707f48583d53bfd5186
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: Icaa1edafcc6e2779fbd6dbc2c058544d6e07f1e9
Reviewed-by: Richard J. Moore <rich@kde.org>
Add several new tests to verify that Qt behaves properly when
high-DPI scaling is enabled. Add a generic framework for
manual tests for good measure. This could be refactored and
used for other manual tests later.
Includes tests written by Morten and Friedemann.
Task-number: QTBUG-46615
Change-Id: Ib6762ec1454711e71f0c094b19015932b99e8d6d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
The QSslCertificate tests only covered certificates with RSA keys, this
extends the test coverage to DSA and EC keys.
Change-Id: Ibee26f449cf6c1d97cbac6b511972eb44d6f0bd2
Reviewed-by: Richard J. Moore <rich@kde.org>
All overloads of QProcess::start will now check whether the program
string is empty and in that case
- set error to FailedToStart,
- set errorString to "No program defined",
- emit error.
Until now only one of the three overloads behaved like this.
As a side effect, start(QString(), QStringList()) will not crash on
Windows anymore.
Task-number: QTBUG-47404
Change-Id: I2f93657204fe3643b1d74a74817843c05fc4a96b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: I4e4a319c5918d697a33f6d6032c36b8c9660ca05
Reviewed-by: Andy Shaw <andy.shaw@theqtcompany.com>
Introduce overloads in the API to allow specifying multiple color
attachment sizes and formats. When these are in use and MRT is supported,
a texture or renderbuffer is created for each of GL_COLOR_ATTACHMENT0, 1, 2, ...
[ChangeLog] Added support for multiple render targets in QOpenGLFramebufferObject
Task-number: QTBUG-39235
Change-Id: Ie7cfd81d1b796a9166b80dff7513aafe0120d53d
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
According to history, the test was supposed to verify
the correct parsing of the command line on Windows by the qWinCmdLine()
function in corelib. It did not test anything since the test
application printed out argv[1] instead of
QCoreApplication::arguments()[1]. Since qWinCmdLine() has been replaced
by the WinAPI CommandLineToArgvW(), the test no longer makes sense
and also starts to fail then warnings are printed to the error output.
Change-Id: Idf642783ebb56eaa8fba9004174557485563a84f
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
So we can have interoperability with algorithms.
Motivated by inefficient code like qDeleteAll(hash.keys())
[ChangeLog][QtCore][QHash] Added key iterators, accessible through
keyBegin() and keyEnd().
Change-Id: I1f9db8a7a4294e1556cbb50b8fe5ebdcf0dc29a2
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
So we can have interoperability with algorithms.
Motivated by inefficient code like qDeleteAll(map.keys())
[ChangeLog][QtCore][QMap] Added key iterators, accessible through
keyBegin() and keyEnd().
Change-Id: Ieee2f9ad031e9d1e845a71447746699bbe95b96c
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The comment about non-OpenSSL backends not reproting a specific error
for self-signed certificates contained a typo, this fixes it.
Change-Id: I3010981d5d87d68ebf5e984c003b8bbbfb019b96
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
Non-OpenSSL backends are not able to report a specific error code
for self-signed certificates.
Change-Id: I56bf130335b2afa65cf2bd5248a40ac0e32f74c2
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Rename the test slot eventFilter() to testEventFilter(), which fixes:
tst_qgraphicsproxywidget.cpp:101:10: warning: 'tst_QGraphicsProxyWidget::eventFilter' hides overloaded virtual function [-Woverloaded-virtual]
void eventFilter();.
Change-Id: Ia05d188b18dcbf3a0b093dcea19a7122bcde6e62
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
tst_qgraphicsanchorlayout.cpp:144:5: warning: ignoring return value of function declared with warn_unused_result attribute [-Wunused-result]
layoutGeometry.adjusted(+right, +top, -left, -bottom);
Change-Id: I411ccaa867e418f36869fc244ea2eeaa5b117312
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Fix warnings:
tst_qtcpsocket.cpp:245:9: warning: private field 'numConnections' is not used [-Wunused-private-field]
int numConnections;
^
tst_qtcpsocket.cpp:1834:9: warning: private field 'exitCode' is not used [-Wunused-private-field]
int exitCode;
tst_qcheckbox.cpp:86:10: warning: private field 'tmp' is not used [-Wunused-private-field]
uint tmp;
^
tst_qcheckbox.cpp:88:10: warning: private field 'tmp2' is not used [-Wunused-private-field]
uint tmp2;
Below warning is caused by code #ifdefed for OS X only, make it a local variable:
tst_qlabel.cpp:114:16: warning: private field 'test_edit' is not used [-Wunused-private-field]
QLineEdit *test_edit;
Change-Id: I53c755545fe2e7ca1f053f40c8c0e50aec2efcdd
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
in tests/auto/other, tests/auto/printsupport and tests/auto/xml.
Change-Id: I28cbdc89d36791f179425f17f90b697c60660938
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
Preparing the replacement of Q[TRY]_VERIFY(a == b) by
Q[TRY]_COMPARE(a, b) for non-boolean types.
Change-Id: Iab6ec2f0a89a3adc79e18304573994965013dab5
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: I7add5b7afeba83895acdcbed110e8275dc76864a
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
The history state had the limitation that it was hard (or impossible) to
use when more than one default state had to be entered. For example,
using it in a parallel state was impossible without ending up in an
infinite loop.
This patch changes the QHistoryState to only have an initial transition,
and the state selection algorithm is changed accordingly. It also brings
QStateMachine closer to the SCXML standard.
The existing defaultState is implemented on top of the
defaultTransition: when used, a new transition, with the default state as
its target, is set as the defaultTransition.
Task-number: QTBUG-46703
Change-Id: Ifbb44e4f0f26b72e365af4c94753e4483f9850e7
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
A parallel state cannot have an initial state, as all children of the
parallel state will be entered. Setting such an initial state on a
QState marked as ParallelStates would already produce a warning and
ignore the initial state. Now any initial state that has been set before
changing the child-mode to ParallelStates will also produce a warning
and remove the previously set initial state.
Change-Id: Ie5fcd44b03516744f785f2d1880bf806918c44d4
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Add QTRY_VERIFY2_WITH_TIMEOUT() similar to QTRY_VERIFY_WITH_TIMEOUT()
except that QTRY_VERIFY2() is used below the loop and QTRY_VERIFY2()
based on it.
Add tests to cmptest.
[ChangeLog][QtTest] Added macros QTRY_VERIFY2_WITH_TIMEOUT(), QTRY_VERIFY2()
making it possible to output a message after the timeout has expired.
Change-Id: I587e24f3aeb73542dbf3ccb936a16f2e0806555f
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
Set QFileDevice::WriteUser on all files extracted from resources. These
are read-only, which is preserved by QFile::copy(). This caused the
deletion of the temporary directory to fail on Windows.
Change-Id: Id99de9160471c38bcec68025c89cfabbe209bdbe
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: David Faure <david.faure@kdab.com>
[ChangeLog][QtCore][QProcess] Fixed a bug that caused QProcess to launch
a child process on Unix even if the directory specified with
setWorkingDirectory did not exist.
Task-number: QTBUG-47271
Change-Id: Ib306f8f647014b399b87ffff13f195158b0e52f5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
We force a recreation of the library paths with added information on
construction of QCoreApplication. This way we can find plugins in
the application directory which only becomes known when
QCoreApplication is created. When the user changes the library path
we create a new list of the manually modified library paths and
recalculate it from the delta of original vs. modified paths when
QCoreApplication is created.
The upsides of this approach vs. keeping an explicit delta are:
* We don't need to introduce a separate data structure to hold
the added/removed status for delta items or the information that
the whole list got replaced.
* The lists never get larger than the the real library paths. An
explicit delta would have to record all modifications.
* I don't think the delta replay algorithm we would have to do
anyway could be made much more compact than the one this change
introduces.
Of course, if the user actually changes anything, the list is
duplicated. Considering that this is a rarely used function and
that we would have to save some extra information anyway, I think
we can live with this.
Task-number: QTBUG-38598
Change-Id: I3bfbbd1be62dd5804dcc7ac808b053428a4e3149
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This adds an OpenSSL-based implementation of the QSslKeyPrivate encrypt
and decrypt method. This puts both the OpenSSL-based and non-OpenSSL
backends (WinRT for now) on par.
Change-Id: I18a75ee5f1c223601e51ebf0933f4430e7c5c29b
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
This is low-hanging fruit, for two reasons:
1. The implementation is dead-simple (unlike, say, in QList).
2. It's completely transparent to the QVector user (unlike,
say, emplace_back, which can only be used inside an ifdef).
Change-Id: Iaf750100cf61ced77aa452f0e4e3c4ec36b29639
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
FileInfo is larger than a void*, so holding them in a QList is needlessly
inefficient. Worse, the code could come to depend on the fragile property
of (inefficient) QLists that references to elements therein never are
invalidated.
Change-Id: I772177c5ac544a5fecce2368f628148308ef260f
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The overload was added for NokiaX86 and RVCT and is bound for
removal.
Task-number: QTBUG-47260
Change-Id: Ic67cee8769847956e16cd0470ebcd663a9e98a40
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Long-lived threads started by Qt itself can now receive events even if
QCoreApplication hasn't been created. This is required in all threads we
start that will handle events, unless we're sure that the thread will
exit before the global application object begins destruction.
Otherwise, those threads will have race conditions dealing with the
event delivery system trying to call the QCoreApplication::notify()
virtual while the object is being destroyed.
Change-Id: I27eaacb532114dd188c4ffff13d4ad2a4bb443e6
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Otherwise, if I open tests/auto/dbus/dbus.pro in Qt Creator, it shows me
"test", "test2", "test3", "test4" and it's very hard to know which test
is which.
Change-Id: Iee8cbc07c4434ce9b560ffff13d0654696c025b7
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
I'm getting an error with WSARecvFrom in nativeBytesAvailable() and I
don't know why. The number of bytes obtained is correct and the test
works for 2 bytes, so let's use that.
The Windows nativeBytesAvailable() function has a comment saying that
WSAIoctl sometimes indicates 1 byte available when there's a pending
error notification, so that function proceeds to do a WSARecvFrom to
peek the number of bytes. Somehow that function in this test is getting
a SOCKET_ERROR I can't explain.
Change-Id: Ic5b19e556e572a72a9df9a405b1fee3b7efb8b24
Reviewed-by: Richard J. Moore <rich@kde.org>
From MSVC 2015 onwards, MSVC formats floats using printf("%g") like
g++, so the fiddling of the expected output needs to restricted
accordingly.
Change-Id: I6e7f78e5e90f70886a8b2ef37c0fb9bf82b5e1a3
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
When running the test, one gets the impression that it hangs.
Add some debug output including time to show what happens.
Change-Id: Iac6b4f0518ecec62169bf2269a0a8ec9192da570
Reviewed-by: David Faure <david.faure@kdab.com>
On Windows, having read-only files in a directory can cause removal
to fail. When file deletion fails, check on the permissions, set
write permissions and retry.
Split apart code paths by OS in tst_QDir::removeRecursivelyFailure();
deletion of the read-only directory on UNIX should still fail.
Change-Id: I36e54be5229a7b552e90fd5f42722b868fa0b6ee
Reviewed-by: David Faure <david.faure@kdab.com>
The test showed failures on OS X:
FAIL! : tst_QListView::batchedMode() Compared values are not the same
Actual (ba.size()): 2
Expected (3) : 3
Loc: [tst_qlistview.cpp(848)]
Use QTRY_COMPARE() to count the number of visible indexes with
a helper function instead of using hard-coded timeouts. Item 3
appears with a little delay on OS X.
Change-Id: I2fb2ff5ebdf9dbe85bdc79401375ad6f47b7b12b
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The test checks whether a child window receives
mouse events synthesizes from touch. Enlarge the child
window so that it fully covers the parent and move the
touch point a bit inside so that it is not affected
by window manager positioning issues.
Use QTRY_VERIFY.
FAIL! : tst_QApplication::touchEventPropagation() 'widget.seenMouseEvent' returned FALSE. ()
Loc: [/work/build/qt/qtbase/tests/auto/widgets/kernel/qapplication/tst_qapplication.cpp(2107)]
Change-Id: Ic08e68b1e547cc7148cd8994464fdc2a14ac507b
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The test sends touch events to the root item at the top left
corner which fails if the views starts to scroll.
Make the view sufficiently large to prevent scrolling and align
at top left.
FAIL! : tst_QTouchEvent::touchBeginWithGraphicsWidget() Compared values are not the same
Actual (((root->touchBeginCounter))): 0
Expected (1) : 1
Loc: [/work/build/qt/qtbase/tests/auto/gui/kernel/qtouchevent/tst_qtouchevent.cpp(1471)]
Change-Id: I357322ccc809ddb5cb587febf3c75cbe497e59d8
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
An object that throws in its constructor cannot be reentered. This
violates both C++11 and C++98. It's also a regression from MSVC 2013.
The unit test is renamed to indicate what it really does, as opposed to
a misleading name that was probably a "thinko" on my part.
Task-number: QTBUG-47224
Change-Id: Ib306f8f647014b399b87ffff13f132436d0578ef
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
QTemporaryFileEngine does not store the pattern, so it needs to get it
again from QTemporaryFilePrivate prior to reopening the file. It's
possible to lose the pattern when remove() is called on the object.
Task-number: QTBUG-46156
Change-Id: I66a35ce5f88941f29aa6ffff13dfc7f83d4fa3a2
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Make the name of the signal and the name of the getter unambiguous,
which in turn allows the easy use of Qt 5-style connects.
[ChangeLog][QtCore] Deprecated QProcess::error() signal in favor
of new QProcess::errorOccurred() one.
Change-Id: Ic5bcf7d6878e6985f1b4fed9dbe247527d13758c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The test is crashing regularly (see bugreport).
Currently the test is not run in the regular CI system, that is why
the failures were not noticed.
Task-number: QTBUG-47128
Change-Id: I70d4ada0872316cc63d7629bb9ab2d055d70cf2a
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
There was an attempt to allow static instances of QIcon in
7727a4355876607a1a022ff54e2570dae883f79c (Qt 4). This patch does only
solve some of the corner cases and broke with
aa5f70c00a. Since the "breakage" has been
there for two years, let's officially declare it unsupported instead of
trying to work around the issue.
Change-Id: I61e12fd03953763ee2e70eae58bcaecabdcb85b8
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
We have ownership for a reason - and there seems to be
no good reason not to accept it here.
[ChangeLog][QtWidgets][QComboBox] QComboBox::setView no longer
deletes the old view directly. It now checks the ownership first.
Change-Id: Icb5e5c0a6e9dc93c1d1c1a90ff57fbcc0786aa60
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
This is a fix-up for cff39fba10.
That patch lead to some internal state issues that lead to the QTBUG-47048
or to QNetworkReply objects erroring with "Connection Closed" when
the server closed the Keep-Alive connection.
This patch changes the QNAM socket slot connections to be DirectConnection.
We don't close the socket anymore in slots where it is anyway in a closed state
afterwards. This prevents event/stack recursions.
We also flush QSslSocket/QTcpSocket receive buffers when receiving a disconnect
so that the developer always gets the full decrypted data from the buffers.
[ChangeLog][QtNetwork] Fix HTTP issues with "Unknown Error" and "Connection Closed"
[ChangeLog][QtNetwork][Sockets] Read OS/encrypted read buffers when connection
closed by server.
Change-Id: Ib4d6a2d0d988317e3a5356f36e8dbcee4590beed
Task-number: QTBUG-47048
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
On Windows, t->timeout was updated only once, at creation time, so the
timer would always show as "overdue" after the first activation.
The timer is updated to indicate the full remaining time during the slot
activation, which is the behavior of the Unix and Glib dispatchers.
Task-number: QTBUG-46940
Change-Id: I255870833a024a36adf6ffff13ecadb021c4358c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Sending several key presses with repeat=true should trigger the action
several times, unless autoRepeat is set to false.
Change-Id: I6469bbd78a608a87852554882c1632ce34422662
Reviewed-by: Liang Qi <liang.qi@theqtcompany.com>
Not all empty states were considered equal.
[ChangeLog][QtCore][QProcessEnvironment] Fixed a bug in
operator== involving different empty states.
Change-Id: I13c3200897847475bde2f963db0d2c587336b8a7
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Wasn't checked, and with all the mutex locking going
on under the hood, we better rule out that there's a
deadlock.
Change-Id: I5a2ef1a524fb42b7840c9f3c18395cde05b7ef28
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Had to mark {,c,const}{begin,end}() inline, since they are, and mingw
complains about inconsistent dllimport attributes.
[ChangeLog][QtCore][QByteArray] Added rbegin(), crbegin(), rend(), crend(),
and reverse_iterator and const_reverse_iterator typedefs.
Task-number: QTBUG-25919
Change-Id: Id5aefb52635f029305135afcd99db0b036a7af82
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Had to mark {,c,const}{begin,end}() inline, since they are, and mingw
complains about inconsistent dllimport attributes.
[ChangeLog][QtCore][QString] Added rbegin(), crbegin(), rend(), crend(),
and reverse_iterator and const_reverse_iterator typedefs.
Task-number: QTBUG-25919
Change-Id: I1d48729c76e510c1e49c0e5dc41691aa662fdf21
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
With two alpha-bits half opacity can not be represented, so we must use
one third (85) instead of half (127).
Change-Id: I2b3f1c983a3034196bf2604840945ad3a81f5b38
Reviewed-by: Liang Qi <liang.qi@theqtcompany.com>
QLocales can be compared for equality,
so qHash should be overloaded, too.
[ChangeLog][QtCore][QLocale] Added qHash(QLocale).
Change-Id: Ia0fdf1207b842b9bb20b8f9ab0165016915debf4
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Keeping the reference may end up in a crash if a created
QIcon outlives the QFileIconProvider and we then try to
generate a pixmap.
The reference is not necessary since the options are queried
only when creating the icon, so they can be saved in the icon
provider.
Task-number: QTBUG-46755
Change-Id: I5c60887c2ed39030a2a20298ff10fd652189e4e7
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
When executing the test in a sequence (as done by make check after
tst_qstackedlayout), tst_QToolTip::task183679 often fails since
apparently the tooltip is hidden when the cursor is near it.
Move to the cursor to the right corner of the widget to fix this.
Change-Id: I3b13239e77cb387f1b1425fab79c8d6faa27b5bb
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Instantiate widgets on stack and add cleanup function for the check.
Change all functions instantiating a QFormLayout without widget on
the stack to use a toplevel widget and pointer variables since
otherwise, the labels automatically created by a call like
QFormLayout::addRow("bla", widget) leak.
Change-Id: I72a7a9c3175b5793a9450c6fcb970012ccd2274b
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
Instantiate widgets on stack and add cleanup function for the check.
Change-Id: Ia527c228f9173d1b5aeba94ba4e14e1beba60731
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
Gather member variables testWidget, testLayout, w1..w3 and sp
used in getItemPosition() and itemAtPosition() in Helper
class ItemTestWidget.
Remove member variables m_grid, m_toplevel and instantiate the
top level widget on the stack in minMaxSize().
Remove empty slots and functions.
Add a cleanup() test checking that no visible top levels
are leaked with explanatory comment about data driven tests.
Change-Id: Ia30120d78144dab3b7c73864c6fbcef606cb19d3
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
Conflicts:
src/plugins/platforms/cocoa/qcocoafiledialoghelper.h
Manually fixed src/testlib/qtestcase.cpp to return the right type.
Change-Id: Id1634dbe3d73fefe9431b9f5378846cb187624e4
f9408317e7 was unfortunately
approved though it had an annoying bug. The patch had
an assign of a visual index into a logical index.
This patch fixes that issue.
Change-Id: I9cc75e4e9701858c92e2c3e5817415041b42f8e8
Reviewed-by: J-P Nurmi <jpnurmi@theqtcompany.com>
os.version is the kernel version which is just not very useful or easy to
use for us. Instead, introduce a string that allows easy differentiation
between Windows 7 and 8.
From the adapter identifier the driver description is often helpful too,
especially in virtual machines.
These allow writing rules like:
{ "description": "Use WARP in some Win 8 and 8.1 VMs",
"os": { "type": "win", "release": [ "8", "8.1" ] },
"driver_description": "VMware SVGA 3D",
"features": [ "disable_desktopgl", "disable_d3d9", "disable_d3d11" ]
}
Change-Id: I196f6b44d7bb9e42ef47f61f4c28d8aa79afb7c4
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Merely filling with Qt::transparent is not enough, as the default blend
mode of QPainter is QPainter::CompositionMode_SourceOver, where the alpha
of the source is used to blend the pixel on top of the destination. The
destination in the case of an FBO may contain garbage, and we end up with
the same garbage as the alpha is 0.
This was evident when running the ellipses and porter_duff/porter_duff2
tests on OS X. These tests can now be un-blacklisted.
Change-Id: I315fa764fa29fb3a06e38945a738a6feadf4502d
Reviewed-by: aavit <eirik.aavitsland@theqtcompany.com>
The test tried to position the mouse cursor over item #0 . This
sometimes results in the cursor being outside the window when
the window manager adds the window decoration on X11.
Move the cursor to the center of the window instead.
Add cleanup slot checking top level leaks, remove empty
functions.
Change-Id: I908240e1cc3fdbe370b43eae0015272ca342a312
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
If we have a filter applied that removes all entries, the source
model is sorted, and then we remove the filter, QSortFilterProxyModel
never emits rowsInserted. This is because it doesn't have the correct
source mapping and doesn't update when the filter is removed.
Change-Id: I447b2d150e509b128d27f4dabc4e081ca4ef037f
Task-number: QTBUG-46282
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The rationale being that the empty string is not a valid path component.
[ChangeLog][QtCore][QDir] QDir::relativeFilePath() now returns "."
instead of an empty string if the given path is the same as the
directory.
Change-Id: Ibcf31904b2ae5edf5639d4c2e5ba234365d347fd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Gives more information to user in case of failure. Also, fix the
order of parameters for some QCOMPARE's.
Change-Id: I3ea91f9602d4d32ac79027b6093caea749633c01
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since of Windows (Phone) 8.1 most of the desktop's thread functionality
is also available, so we might be able to share the code and get rid of
the extra implementation for WinRT.
Task-number: QTBUG-43837
Change-Id: I0ce907cd94899834527f88c70e1e395bafdb14b3
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@theqtcompany.com>
This reverts commit a6000e2b66.
Temporarily remove this to unblock the qtdeclarative dev CI.
While Windows 8 VMs are fixed by this patch, Windows 7 has different
problems.
Change-Id: I45ef064ed953cc4b7bbf19657300d4fc43d82452
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
ad9698713f reduced the curvethreshold
for wide lines, to fix QTBUG-46151. But as a side effect, the
threshold was increased for lines of widths >=0 and <4. This commit
fixes that, and also adds a lance test for the issue in QTBUG-46151.
Change-Id: I52507db622435fe1d2646640cb0bd9cd8222e453
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Move the code path handling widgets embedded in QGraphicsProxyWidget
into the loop moving up the parent hierarchy.
Add child widget to test.
Task-number: QTBUG-41135
Change-Id: Ibd86413faaa927145a85a2f5864f162979135053
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This isn't specific to an Ubuntu version, unfortunately. It also fails
on OpenSuSE occasionally and other Ubuntu versions.
Change-Id: I6a1ca55a198270f1a1e8a9916e9f768762211550
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
When the test fails, show the actual signals spy count.
Change-Id: Id7312bfbfb6531404a9df73234031f13295c80ea
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
It's flakey with 'current > 42' sometimes succeeding and sometimes failing.
Change-Id: I86f52b0d0cecd345ed6c5852c822d12eae6acb26
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The failure of this test is not architecture specific but rather
Windows specific. It is failing on either type of Windows machine at random
intervals.
Change-Id: Ie3ab1d868053b22ee5b0d965a8cd6b923985b019
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
All variants of the tests are timing out randomly on all platforms :(
Change-Id: I9244602a8d06fd07d3cc99b2fb8fdf6e07e92cf2
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The Intel compiler defaults to "fast math" mode, which is why those
tests had been failing. So for the test that is trying to check whether
we conform to IEEE strict requirements, turn on strict requirements.
Change-Id: I02f8426b1c8e4241ac10ffff13e8efa224f313b2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Since Connection can be copied, one copy could be used for
disconnecting, but the other's d_ptr wouldn't get updated and would
continue to report as still connected.
This patch fixes that by making it check the internal state. That is
only done after d_ptr is already known to be non-null. Unfortunately,
that is the common path:
if (connect(sender, &Sender::signal, [] {}))
will call an out-of-line function. I don't see a way out.
Task-number: QTBUG-46213
Change-Id: I66a35ce5f88941f29aa6ffff13dfb45dca68a350
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Global (application-level) event filters are supposed to be run only in
the main thread, so ensure that it is the case.
Change-Id: I27eaacb532114dd188c4ffff13d5a17d991b8bd2
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
By adding support for the driver description, we can detect if
we are in VMware. In this case D3D9 and 11 get disabled, so only
the software-based options are in use.
This allows running autotests like tst_qopengl, tst_qopenglwidget,
tst_qgl, etc. in the Qt CI system. There OpenGL 2.x is not available,
so ANGLE is the only option. D3D11 is not an option, so it picks D3D9
by default. However, this results in mystic failures. The stable solution
seems to be to use WARP. This can be achieved by setting disable_d3d9 in
the built-in GPU blacklist.
Change-Id: I937c4b3fa82fc1a2d524b4eb712732722df2070c
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
...by moving common code into the Private ctor,
and catering for C++11 move semantics a bit.
Saves ~1.5KiB in text size on Linux GCC 4.9 C++11 release
builds.
Change-Id: I52ed7e47f76b69500a871844c0920e27fe51a127
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's just a test, but it's in the way of automatic tracking
of inefficient QLists.
Change-Id: I2dcfd81c9e208dab57bb256d7c276ad5303f196c
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Add a cleanup function for the check and disable animations
in tst_qwidgetaction to prevent effect widgets from interfering
(vista style animations).
Change-Id: I043ecb131c8dcd07b6ef10bc75c9e010ab569e85
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Verify the bounding rect of the left hand side of copy/assignment,
not the right hand side (which is passed by const ref).
Change-Id: I5044d269fe0acb5f4484c82da7e030ca33958792
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Addition of new options SSL_KEY, SSL_CERT, SSL_CA, SSL_CAPATH and SSL_CIPHER
to allow SSL-encrypted connections to MySQL databases.
When needed, these options must be specified in the function call
QSqlDatabase::setConnectOptions() before the call to QSqlDatabase::open().
SSL_KEY = the path name to the key file
SSL_CERT = the path name to the certificate file
SSL_CA = the path name to the certificate authority file
SSL_CAPATH = the path name to a directory that contains trusted SSL CA
certificates in PEM format.
SSL_CIPHER = a list of permissible ciphers to use for SSL encryption.
These options replace CLIENT_SSL (which should not be used any more).
Example:
db.setConnectOptions("SSL_KEY=client-key.pem;" \
"SSL_CERT=client-cert.pem;" \
"SSL_CA=server-ca.pem");
[ChangeLog][QtSql] SSL support for MySQL database connections has been added.
Option CLIENT_SSL replaced by SSL_KEY, SSL_CERT, SSL_CA, SSL_CAPATH and
SSL_CIPHER, so that the keys, certificates and cipher can be specified.
Task-number: QtBUG-3500
Change-Id: I8197234b169a818658678d6fcc953c90e83db23e
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
... and enable auto-deletion on it.
This allows users of the function to get rid of their own
cleanup code. They just need to keep the shared pointer alive
for as long as they need it.
Drive-by changes:
- replaced QStringLiterals that were only used as the rhs of op+
- replaced an instance of mid() used as the rhs of op+ with midRef()
- enabled NRVO
Change-Id: I161d39461e020c9e8d473c0810dea2109fe0d62d
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
They didn't show up in the "old" CI runs because they usually pass the second
time they are executed - which the testrunner does. The new CI doesn't do that
anymore, instead we now mark those tests explicitly and will track their record
of passing and failing in the new metrics database.
Change-Id: Id34dd6f792f38995b07b6fec88f833df64de2f8b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Otherwise you cannot link it statically against QtCore.
Change-Id: I4ac35602cea2192974f3e96ecad35edac976ce27
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
This allows for example properties with QMap<Foo, Bar>
[ChangeLog][QtCore] Types in the Q_PROPERTY macro can now contain commas
(for example, QMap<Foo, Bar>)
Change-Id: Ibf5c8c9cf20a7c8b3dfec9e891fb8a9ca1bdba7c
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Size policies can be compared for equality,
so qHash should be overloaded, too.
[ChangeLog][QtWidgets][QSizePolicy] Added qHash(QSizePolicy).
Change-Id: Id219f47ac6cb236efdd73cad7b892c8efd034d5c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Zero is a legitimate size to be returned by bytesFree/bytesAvailable
functions, so change those functions to return some 'invalid' size
in case of an invalid drive.
This is also consistent with the original version from the Qt Systems
framework.
[ChangeLog][QtCore][QStorageInfo] Fixed sizes returned for invalid drives.
Task-number: QTBUG-45724
Change-Id: I312fba521fdf8d52d7a0ac0e46cacca625775e80
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Previously, QStandardItem::operator<() returned true when both
items had invalid data. With MSVC in debug mode (checked
iterators/STL), this triggered an assert in
tst_QStandardItem::sortChildren() since that verifies
that !(b < a) when a < b:
Debug Assertion Failed!
Line: 3006
Expression: invalid operator<
Introduce a stable sort order for invalid items such that
other items are always less than invalid items and comparing
invalid items returns false (indicating equivalence).
Change-Id: Ica0f0d9f001c86973b1941dbcc1faf282e4c47df
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
QSslConfiguration is better suited for these APIs. The ones
in QSslSocket that already have a counterpart have been deprecated.
[ChangeLog][QtNetwork][SSL/TLS Support] Most of the QSslSocket
functions to deal with ciphersuites, certification authorities
as well as elliptic curves have been deprecated in favor of the
corresponding counterparts in QSslConfiguration.
Task-number: QTBUG-46558
Change-Id: I1de03379efcbcab931c20e876e252769fe4279e0
Reviewed-by: Liang Qi <liang.qi@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Jani Heikkinen <jani.heikkinen@theqtcompany.com>
When the server could not be reached, the test previously,
produced:
FAIL! : tst_NetworkSelfTest::smbServer() 'smbclient.waitForFinished(5000)' returned FALSE. ()
- Loc: [tst_networkselftest.cpp(992)]
QWARN : tst_NetworkSelfTest::smbServer() QProcess: Destroyed while process ("smbclient") is still running.
Fix this by:
- Using QStandardPaths::findExecutable to locate the binary instead
of test-wise starting it.
- Add a function to ensure process termination.
- Pass a timeout argument to smbclient and pass an interval
depending on it to waitForFinished(), which should prevent
having to kill the process in most cases.
- Add proper error message
Change-Id: I1cbc76ca69aec7d1e0e880685bed54b0ba7f21c7
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Give the link a name containing time stamp and ensure
it is deleted.
Change-Id: I846c58095acbcd92e7daccfd43a69dd97e95e7b0
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Previously, the path was removed from list returned (indicating failure
to remove) only when the thread's list was empty
(last file in directory). Move the statement up so that removal
happens when it is found in thread's list.
Task-number: QTBUG-46449
Change-Id: Ib79199c731f79357b0e5c17636254fbeb3a754a0
Reviewed-by: Robin Burchell <robin.burchell@viroteck.net>
When trying to do a straight right/left/up/down swipe, a minimal
change in the other direction caused to the gesture to be canceled.
Introduce a threshold for checking such to prevent this.
Task-number: QTBUG-46195
Change-Id: I3e199f2ec0c81d23a16073b1f5b8fff004958239
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
Don't hit the scrollbar with the mouse click
Change-Id: Ie82d8c5c058df9a482e7d5de2fe40681572f19ad
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
make sure it'll work with the new mouse handling as well.
Change-Id: Ia2d567e618b77b0fa3532ee6c335cbdf5e496241
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Add command line options for
- Grabbing gestures
- Suppressing mouse and touch events
Add gesture events to the log.
Add a hierarchy of gesture classes storing the parameters
of finished gestures with drawing functionality and
implement for pan and swipe.
Task-number: QTBUG-46195
Change-Id: I019fe5b60116316a54e11b2c30e1d34f5e72bcf0
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
OS X has an unreasonably low default for the maximum number of open
file descriptors (256). The unit test creates about 200 threads and each
thread in Qt creates at least two file descriptors (pipe), so the test
cannot execute.
Change-Id: I656367bca6d0a40fb1edb8c72914304db0f429ac
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Since we added font matching by style name, the style name is not just
a derived property and should not be ignored in comparisons.
The QFontDef::exactMatch comparison is left unchanged, since it tests
if a loaded font matches a requested one.
Task-number: QTBUG-30851
Change-Id: I4187c5b993815001f35bcf24dc449059bfdcba6f
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
When a premultiplied alpha changes value because it is rounded to fewer
bits the premultiplied colors may need to be recalculated with the new
value. Otherwise the color will both be wrong and potentially invalid.
Change-Id: I9ec74a22aac73cd7ffab04e180cf2bf35bb4c315
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
As discussed on the development mailing list, the new overload is ambiguous
and breaks source compatibility. Therefore this function that is new in 5.5
shall be called readLineInto.
Change-Id: I2aecb8441af4edb72f16d0bc6dabf10cdabf32e2
Reviewed-by: Jan Kundrát <jkt@kde.org>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Implement init() and cleanup() to verify that
no top level widgets are leaked.
- Position widget in tst_QToolTip::task183679() and set
window title.
- Remove hardcoded wait in tst_QToolTip::whatsThis()
and use a find function within QTRY_VERIFY().
- Rearrange and clean code a bit.
Change-Id: I0b1ad88444fc9441c1071a2527f75de1f68ea9e5
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
- Use QTRY_COMPARE() in touchBeginWithGraphicsWidget.
- Change raw event translation tests to wait for the
window to become active to avoid WM positioning issues.
- Blacklist the raw event translation tests on Linux.
Task-number: QTBUG-46266
Change-Id: I73aae375ee279a518a2a083d0ce8919cce474cb3
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
QTextLayout::additionalFormats setters and getters using QList<FormatRange> have
been deprecated; port to the QVector versions.
Moved op== definition for FormatRange needed in tst_qsyntaxhighlighter.cpp
to a friend declaration in FormatRange itself, because MSVC 2008 doesn't find
it otherwise.
Change-Id: Ibab6589df057f02377d895079b56395859e3401e
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
When invoking a macro with less argument than it expect, we would
crash trying to access the vector of arguments from the invocation
as we are trying to substitute an argument.
(Note that we do not show an error in case of argument mismatch
because ithat might happen parsing valid code as moc's c++ parser
is not 100% accurate (that was QTBUG-29331))
Task-number: QTBUG-46210
Change-Id: I3f08d7f5049e593a5bdc02a594ea63cadf66e7a4
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
The pattern "mySet.intersect(other).isEmpty()" has been spotted in
the wild and in Qt codebase. intersects() is much cheaper because it
bails out as soon as we find one common item and doesn't do any
allocations.
[ChangeLog][QtCore][QSet] Added intersects().
Change-Id: I44a350dc4cdb9deb835a23eee99fc99d6ca24c82
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Add CONFIG += testcase to the .pro file which was missing.
The test thus was never executed by make check and left to
rot.
Fix up code:
- Remove module includes.
- Introduce explicit constructors taking parent object
for helper classes, removing calls to setParent().
- Ensure test does not leak objects by converting pointers
to stack variables or introducing QScopedPointer, verify
by checking for an empty window list in cleanup().
- Simplify code by removing unneeded variables.
- Split up conditions in QVERIFY().
Fix tests:
- Show windows were required when events are sent to
QWidget::windowHandle().
- Invert the conditions checking whether touch events are
accepted by widgets since widgets no longer accept them
by defaults in Qt 5 after
e50416066c.
- XFAIL multiPointRawEventTranslationOnTouchPad()
which started to fail at some point in Qt 5.
- Mark as insignificant on OS X due to crash.
Task-number: QTBUG-46266
Change-Id: I6676d021afb015411a24d97d9b8f7c327d4d3c3f
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The positioning test has been observed to fail on X11.
Change-Id: I58727126a8742de93ec203e9992a9ae1b454f731
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
We have at least 5 different (but equal) implementations of a wrapper
in Qt, and some code uses explicit NSAutoreleasePools. Having a shared
implementation lets us clean up things a bit and makes it easier to
reason about which pools are actually needed.
Change-Id: I2fd8eefc3ae7308595ef9899b7820206268362a5
Reviewed-by: Tim Blechmann <tim@klingt.org>
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Two (?) tests can fail: what they actually try to test is that our application
quits on the second single shot timer (2 s. timeout) and not on the first one
(timeout 1 s.) - on the first timeout we either ignore event, or we still have another
window and should not quit yet, on the second timeout we actually do quit the app.
The test checks this in a quite fragile way, counting the number of timeouts for the third 100 ms
timer. It looks like on OS X (VM-only) there is some delay (~500-600 ms) before we receive the
first timeout so the count is always 14 or less, making the test to fail.
Change-Id: I9e8728e6c956025d91528f4195982767a5d3d320
Task-number: QTBUG-46164
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
baselineexample.pro is missing CONFIG += testcase, so,
make check succeeds without doing anything. The test seems
to connect to some network server to retrieve baseline images,
but that infrastructure apparently no longer exists.
Change-Id: I98f4fe5ef8a508fda90e408df2781a944eb99a60
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
QTreeViewPrivate::updateScrollBars depends on a correctly set up
viewItems vector. If a delayed layout is pending, we must call
QTreeViewPrivate::executePostedLayout before accessing any stored model
indices.
Task-number: QTBUG-45697
Change-Id: I55fcbaf81f225b26181c2cf739283740b85dd16a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Do not try to automatically register the meta type for Q_GADGET that
are not default constructible.
This fixes a source incompatibility in the function pointer syntax
of QObject::connect when such types are used as an argument of a signal.
Task-number: QTBUG-45721
Change-Id: I3065f6d57bc1f37e16988d2dee99118de250ca56
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Convenience to avoid annoying detaching (instead of using at()),
especially on temporary vectors (returned by functions or so).
[ChangeLog][QtCore][QVector] Added the convenience constFirst
and constLast functions.
Change-Id: If61b1f0096f6a7a1c9074340e237cc2376ce3d18
Task-number: QTBUG-46026
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Remove the insignificant_tests CONFIG option in favor of a BLACKLIST
file. The tests blacklisted have been found using CI builds logs.
Change-Id: Iffc9043654a9dcd97d55e262011c8daff6f4e60f
Task-number: QTBUG-25300
Task-number: QTBUG-45502
Task-number: QTBUG-46325
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
To cover the situation that the process ID got reused, the current
process name is compared to the name of the process that corresponds
to the process ID from the lock file.
If the process names differ, the lock file is considered stale.
[ChangeLog][QtCore][QLockFile] Detection of stale lock files got more
robust and takes the name of the process that belongs to the stored
PID into account.
Task-number: QTBUG-45497
Change-Id: Ic3c0d7e066435451203e77b9b9ce2d70bfb9c570
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Convert vertical wheel events to horizontal for two cases of
the items layout when vertical scrolling is impossible:
1) TopToBottom flow with wrapping
2) LeftToRight flow without wrapping
Do it only for pure vertical events to avoid a mess for such
devices as touchpads or Apple Mouse.
[ChangeLog][QtWidgets][Important Behavior Changes] Allow
horizontal scrolling with a vertical mouse wheel for QListView.
Task-number: QTBUG-37007
Change-Id: Ie2525153fa7b443d27ca08cc5f5d4d7ecdb8c183
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This function was introduced alongside the support for Unix file
descriptors, so it's a good indicator of whether Unix FDs are
supported. Ever since dbus_minimal_p.h, however, DBUS_TYPE_UNIX_FD may
be defined even if the system libs don't support it.
In order to fix this issue, I had to fix what was apparently a merge
conflict resolution mistake and remove the #ifdef around the test. Doing
the latter is a good idea due to moc being unable to find <dbus/dbus.h>.
This was tested with both linked and dynamically-loaded libdbus-1.
Task-number: QTBUG-46199
Change-Id: I66a35ce5f88941f29aa6ffff13dfb4b5438613a3
Reviewed-by: Jani Vähäkangas <jani.vahakangas@theqtcompany.com>
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
Otherwise the type is registered with the wrong name
Change-Id: I68ec3a05e2528816626e648b46ccc9d70b004866
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
These changes are required to make event delivery from
test lib synchronous.
Change-Id: I8f7093a2bfe01dfa1b0315620d672e7346a7a23a
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Include class name, object name and file name when available.
For the bug in question:
QIODevice::read: device not open
becomes
QIODevice::read (QTcpSocket, "QFtpDTP Passive state socket"): device not open
Adding a static function also makes it easier to set a breakpoint
and find the culprit.
Task-number: QTBUG-46112
Change-Id: Ic181d8ab292912d1acbcc3cb84d9679fe4842ca0
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
The test fails on all ubuntu versions, not only 14.04 as far
as I can tell.
Change-Id: I1e204f68bbb791eef25338f0ed007942a2eb22ff
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The resizeColumnsToContents test would fail on some machines, as the
requested 40 pixels where to small to accommodate the header size hint
as well. Raising it to 60 pixels helps make the test pass.
Change-Id: I2a5026fd18425e236849a1cef25ba8d899c7ae5a
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
This should allow us to make the rest of 14.04 enforcing
Change-Id: I37f6751e8b966b047d1bd2e49ba9482e5846acb1
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Otherwise, make check does nothing, always succeeding.
Change-Id: I0fe04697e02ab0f33cd9aebb550777e200c70804
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
For example the Galaxy Note series of devices. This makes possible
drawing applications which handle stylus events differently from touch
or mouse. As on any other platform, if the application does not accept
the QTabletEvent, a QMouseEvent will be synthesized.
Also fix the tablet manual test to show larger circles on hidpi devices.
[ChangeLog][Android] stylus devices such as the S Pen generate
QTabletEvents
Task-number: QTBUG-38379
Change-Id: Ib594f453b8403cc06aa4e440a76f07afa3bac38c
Reviewed-by: Paul Olav Tvete <paul.tvete@theqtcompany.com>
the functionality is now covered by the qmakelib test.
Change-Id: Id627f573fb247ff3b86558509e27b6a9862c1a59
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
the idea was to speed up optimized msvc compilation, but it didn't help.
still, it's better structured that way.
Change-Id: I4b2108d02a47ef8ef704b0b542b0f281bff20165
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
also adds documentation, which is kind of a sanity test. ehm.
Change-Id: I6b520e8b505a2bfbb1e376fa72be0f140227a3a4
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
freeData() takes a Data*, not a QContiguousCacheData*.
Task-number: QTBUG-45783
Change-Id: I96d7ac38dac24b418138ffff13d7fdf09b1d6b07
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reduce the size of .text section in QtCore by 4.5KB and in QtNetwork
by 26.5KB.
Change-Id: If7998776166b9681c1e4b24c51d40444aa996d7a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Draw touch points as dots and mouse points as circles
to be able to verify High DPI scaling.
Change-Id: I2293adbcc726391f0d9e156935d609b957432029
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
If the internal queue contained multiple events, but the first one did
not select any transitions, the external event queue would be checked
before the remaining events in the internal queue.
Change-Id: I1a7f49afdefaaf2b4330bf13b079b61344385ea0
Task-number: QTBUG-46059
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Standalone files are added by using RESOURCES += file.txt, while
collections of files are defined as collection.files = f1.txt f2.txt
and then added using RESOURCES += collection. For collections a prefix
can also be set using collection.prefix = /foo. The standalone files
are not prefixed.
Change-Id: I8236808238414da05e744f799a1bb15a72f4a46f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
QCursor::setPos with Cocoa integration is calling CGEventPost. Some time is required
before the cursor position is really set, so we can not immediately call QCOMPARE.
Change-Id: I83a4c13f06ec151a4b9ab18c83de1eb5247ea9cc
Task-number: QTBUG-45553
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
Reviewed-by: Caroline Chao <caroline.chao@theqtcompany.com>
The test is marked as XPASS in CI. This change follow 201bf9e673.
Change-Id: I0938b1417f792aa88fc1b40c08e7cd810e7d22f7
Task-number: QTBUG-22326
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Prior to this, moc would not generate the function unless the
gadget class had a property or a non-constructor invokable.
Change-Id: Ic020ea5f8f59702f5e9e194a46e26850e53e5cfe
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
An error similar to the one below would be emitted
by the compiler on the moc generated file:
error: assigning to 'QObject *' from incompatible type 'Gadget *'
if (_a[0]) *reinterpret_cast<QObject**>(_a[0]) = _r; } break;
Change-Id: I75ae7bd6c46d20db2d47a80eaa08aae302d7d6c8
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This test has been initially blacklisted. However it is racy by design
and cannot be fixed. Removing it.
Change-Id: I6c386a12e54d8a382f17c4fc033428f56eb03f02
Task-number: QTBUG-23837
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
QMachOParser is defined in the private header that only gets included in
developer-builds. Thus ifdef its usage out, not just the header
inclusion.
Change-Id: I1e0059787be6eb70bd1661c7814e69eee7c5b2ee
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Make it possible to read images with EXIF orientation automatically
applied. This was originally implemented without opt-out in Qt 5.4, but
reverted. Here it is implemented as opt-in for JPEG, and opt-out for TIFF
to keep behavioral consistency.
The EXIF support for JPEG was written by Rainer Keller.
[ChangeLog][QtGui][Image plugins] An option has been added to
QImageReader to enable automatic application of EXIF orientation.
This behavior was default in Qt 5.4.1, but reverted in Qt 5.4.2.
Task-number: QTBUG-37946
Task-number: QTBUG-43563
Task-number: QTBUG-45552
Task-number: QTBUG-45865
Change-Id: Iaafd2519b63ede66ecc1f8aa4c7118081312b8f5
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
It is fully possible to show a window on all the connected screens
even when the screens are not virtual siblings, i.e. they do not
form one big desktop. When X is configured to use a separate screen
for each physical screen, it becomes essential to do setScreen()
either directly or via QDesktopWidget in case of widgets. The original
code attempting to call QWindow::setScreen() cannot succeed since there
is no QWindow available before the widget is shown. This is easy to
work around.
The app now works identically in all cases.
Change-Id: I519ca0c0109c68aac2f2d4e6972d14b55767b403
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
When both scroll bar's policies are set to ScrollBarAsNeeded, make sure
the scroll bars are shown if needed and not show if not. Even the corner
case, where one scroll bar's visibility depends on the other, is handled
properly.
Task-number: QTBUG-45470
Change-Id: I11d6ccf7c0b51644a5ce2d5c3fc59e2e4812755d
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Thorbjørn Lindeijer <bjorn@lindeijer.nl>
ItemIsTristate only makes sense in tree widgets, where it triggers the
auto-tristate behavior between parents and children.
Change-Id: Idfa8bb5d0b9c63fe450115fb58d088929e11c7ff
Reviewed-by: Jarek Kobus <jaroslaw.kobus@theqtcompany.com>
My commit 6c973dee2c broke the case where setApplicationName
is called before the QCoreApplication constructor.
Fixed and added autotest.
Task-number: QTBUG-45283
Change-Id: If7bdb0d82be50b50a95a04027f5f9d7143c1a7ac
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
As usual, user code connected to signals emitted from Qt may destroy
an object's internal status while a signal is being emitted.
Guard a bit QDialogButtonBox signal emissions to prevent
crashes in case the button or a dialog get deleted from a slot
connected to clicked(). Also, be sure to emit the corresponding
accepted/rejected/etc. signal.
Change-Id: I7b1888070a8f2f56aa60923a17f90fb5efef145c
Task-number: QTBUG-45835
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Because if it doesn't, then calling dbus_type_is_fixed or is_basic may
result in a failed assertion.
process 16304: arguments to dbus_type_is_fixed() were incorrect,
assertion "_dbus_type_is_valid (typecode) || typecode ==
DBUS_TYPE_INVALID" failed in file dbus-signature.c line 345.
Change-Id: Idf715b895bac4d56b4afffff13db2ed71b1516a5
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
The test is always marked as XPASS in CI.
Change-Id: I629bdec6f038cd8b6208fc4db61c67a9ea003b2e
Task-number: QTBUG-22326
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
We were fetching "lastText" too late, and setting the opacity
of the clear button to 0.
Change-Id: I82c2aea7dab4af4424fb57e12f78d07a0374457e
Task-number: QTBUG-45518
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
GCC 5 combined with a recent binutils have a new optimization that
allows them to generate copy relocations even in -fPIE code. Clang has
the same functionality when compiling an executable with -flto. We need
to let the compilers know that they cannot use copy relocations, so they
need to use really position-independent code.
Position independent code throughout is not really required. We just
need the compilers to use position-independent access to symbols coming
from the Qt libraries, but there's currently no other way of doing that.
Task-number: QTBUG-45755
Change-Id: I0d4913955e3745b69672ffff13db5df7377398c5
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The test keeps failing. The approach of sending mouse move events is
inherently fragile due to the use of QCursor::setPos and the expectation
that that produces the correct sequence of mouse move events.
Change-Id: I07ec75460b70c27152e8775deffcb77fa9328d0c
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
When there are conflicting transitions, a transition that is nested
deeper (i.e. more specific) has priority. If two transitions have the
same nesting level, the one that comes first in the document order gets
priority.
Before this patch, only the document order was considered.
Change-Id: I58f188c270cabe2c386a783ceef7a0a955105425
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
- Make the subject of the Property watcher settable.
- Embed it into a QMainWindow with menu and
listen to the screen changed event, setting
the new screen with a message about the position.
- Remove hash, close obsolete windows by iterating
over the top levels looking for the screen.
Change-Id: I4ed1122bab7c0cd9676d63995ce85a44719f4ba6
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
and deprecate isTristate()/setTristate() which isn't specific enough.
This matches the changes to the flags themselves.
Change-Id: I0ba592af340cb81fc9f4d483569844fe8d7510c3
Reviewed-by: Jarek Kobus <jaroslaw.kobus@theqtcompany.com>
This makes the behavior much more clear. You can get a tristate checkbox
just by setting the CheckStateRole to PartiallyChecked, no tristate flag needed.
The flag, on the other hand, enables the automatic-tristate behavior in
QTreeViews (and only there), hence the new name for it.
Change-Id: I18d292a8b8294c863eab806f3874d15dfb72556c
Reviewed-by: Jarek Kobus <jaroslaw.kobus@theqtcompany.com>
QReg*Exp*s can be compared for equality,
so qHash should be overloaded, too.
There was a (poor) private implementation of qHash(QRegExpEngineKey)
already, which has now been replaced with a better one (the old one
didn't take into account all the fields that make up equality,
producing unnecessary collisions).
[ChangeLog][QtCore][QRegExp] Added qHash(QRegExp).
[ChangeLog][QtCore][QRegularExpression] Added qHash(QRegularExpression).
Change-Id: I1d22fbcc0508018a3f94b4c24571b13ba6e07df2
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
The failing test has been blacklisted in 3ed6f74fb2.
Change-Id: I5a2defd839e2f98690fc8cea9ff18e7503caf0de
Task-number: QTBUG-25294
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
This is for example useful when looking for a possible BLACKLIST
file while doing a shadow build.
Add autotests for blacklist.
Change-Id: I41d3939d31d21d10187fefcb82604736d911b6ad
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
QGraphicsWidgetPrivate::init had a special code path for setting
the item's parent. For some reason that code path caused the
ItemChildAddedChange notification not to be sent to the parent
element, which is wrong. Instead use the "normal" path, which is
what the QGraphicsItem constructor does anyhow.
Change-Id: Iad84cae05d797022a45977d35ca00c80c17c306a
Task-number: QTBUG-45867
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
The behavior of "external" and "internal" transitions is identical,
except in the case of a transition whose source state is a compound
state and whose target(s) is a descendant of the source. In such a case,
an internal transition will not exit and re-enter its source state,
while an external one will.
[ChangeLog][State machine] Added support for internal transitions.
Change-Id: I9efb1e7368ee52aa2544eb84709a00ae3d5350d3
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
As nothing changes in the state machine when selecting transitions for
events and then calculating the exit- and entry-sets, some calculations
can be cached.
The exit set for a transition was calculated multiple times. First in
removeConflictingTransitions, where the two loops would each calculate
them multiple times. Then secondly in microstep(), which would calculate
the exit set for all transitions.
Transition selection, exit set calculation, and entry set calculation
all calculate the transition domain and effective target states for
transitions.
Change-Id: I217328a73db2f71e371eb5f60a0c7b222303f0ca
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Set status code and status text if file was sent with reply.
Change-Id: Ie6acadc5c1d06538449262ffd8486e8de573b931
Task-number: QTBUG-45581
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Pasi Keränen <pasi.keranen@digia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
The init()/cleanup() code in tst_qfiledialog and tst_qfiledialog2
currently differs and fails to clean up the settings file
since it only removes the legacy settings under the Qt group
and instantiates a new QFileDialog while the QSettings class
is still in scope. Also, it has no means of clearing the
setLastVisitedDirectory(), which causes the
tst_QFiledialog::completer() and tst_QFiledialog::history() tests
to interfere, leaving the settings in an invalid state.
tst_qfiledialog2 does not use QStandardPaths::setTestModeEnabled(().
- Ensure the last visited URL is always clean by
making QFileDialogPrivate::setLastVisitedDirectory()
static and calling it from init().
- Introduce a cleanupSettingsFile() function to the tests that
cleans both groups and call it from initTestCase() and cleanup()
to ensure a clean state.
- Add QStandardPaths::setTestModeEnabled() to tst_qfiledialog2.
Fixes sporadic test fails when executing
tst_QFiledialog::completer() and tst_QFiledialog::history()
in a sequence.
Task-number: QTBUG-45764
Change-Id: I24de3caabf77be067b385d64ff11b7a07fe12b72
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
These values were added as part of upgrading to Unicode 7.0
Change-Id: Ib208828a7685ba4f89f0e2f06033f74c8ff13532
Reviewed-by: Andy Shaw <andy.shaw@theqtcompany.com>
Completes the inplace converters so that we can rely on inplace
conversions to succede as long as the image depth is the same.
Change-Id: Ia1ae34b5de1bc16e87ff5403bdacfcae44a22791
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Some inplace conversions would not set the requested image format in
the returned image, due to the same conversion being used for several
destination formats.
This patch ensures all inplace conversions return the right format,
and adds testing infrastructure to easily test iterate over all formats
so that they all can be tested.
Change-Id: I68ab17a713ddb2aa8ed6aaf0a0a1ec8bbcb56090
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
The one converters from RGB30 was misplaced in the method table, and
the unpremultiplication from A2RGB30 to RGB30 had an underflow mistake
when alpha was 2.
Change-Id: I92c11ede28611a3dbdce72aca1898845c120c209
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Doing a build on OS X without -developer-build fails.
Change-Id: I49c178ab2428177d9dd94f84620595a4bc132244
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Focus the test on embedding QWindow: Remove the
NSToolBar code. Use standard NSApplication startup
code. Use winId() to access the NSView instead of
QPlatformNativeInterface (which is gui-private).
Rename Window -> RasterWindow.
Change-Id: Ie98cb73020d2721743bb665b89b17f07f2bf984b
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
Due to a behavior change.
This reverts commit 9157087334.
This reverts commit 16c32c6dfb.
Task-number: QTBUG-37946
Task-number: QTBUG-45552
Task-number: QTBUG-43563
Change-Id: Idf8df7d8f22465e8f6b51acb68993ac97208b184
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Fixed issue that text/uri-list mimedata got from QMimeData::data()
was corrupted after setting it back via QMimeData::setData()
Change-Id: I2377523a9286519402ab9127ed7f3fa66e39a679
Task-number: QTBUG-45486
Reviewed-by: David Faure <david.faure@kdab.com>
Some QImage methods were not preserving image metadata, or only
preserving some of it. This adds the missing parts and adds a test for
metadata.
Change-Id: Ib5892a23e49dfde5ea26074d3deaa887fa930c6b
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Remove the insignificant_tests CONFIG option in favor of a BLACKLIST
file. The tests blacklisted have been found using CI builds logs.
Change-Id: I34374ed7269f941c330c65d97fe083c83d3df461
Task-number: QTBUG-33574
Task-number: QTBUG-30943
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
The test keeps failing, perfectly when run singly btw. However the approach of
sending mouse move events is inherently fragile due to the use of
QCursor::setPos and the expectation that that produces the correct sequence of
mouse move events.
Change-Id: I12ba1afcfd3fab965b8f93d5def48b435fd2ff33
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Remove the insignificant_test CONFIG option in favor of a BLACKLIST
file. This test has been found failing on OpenSuse in CI.
Change-Id: Ibc6af3c30277fec7e422e8bbeccd9437de2a61ce
Task-number: QTBUG-23837
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Use QWidget::move() to position floating dock widgets.
Add a test for QMainWindow::restoreDockWidget().
Task-number: QTBUG-45780
Change-Id: I945917728a663916e8c225b9d3d2a75fa508d68f
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Currently the cipher preferred by the client will always be used for SSL
connections. This change makes it so that by default the ciphers
specified by the server will be used (like the Apache SSLHonorCipherOrder
option). This behavior can be disabled using a new SslOption.
[ChangeLog][QtNetwork][QSslSocket] QSslSocket will now default to using
the cipher preferences of the server socket when used as an SSL server.
This can be disabled using the QSslConfiguration.
Change-Id: I2d16d10145cf88a7412f30ef960d87024777de1c
Reviewed-by: Peter Hartmann <peter-qt@hartmann.tk>
On OS X 10.10. This test in tst_QComboBox is currently failing in CI.
Change-Id: Ie326f79a900c3ae926c7ebe5bb5880dd422cee60
Task-number: QTBUG-45531
Reviewed-by: David Faure <david.faure@kdab.com>
The tests were trying to access one pixel outside of the image.
Change-Id: Ieabdefbbdb76bb736214a0495bec72c881b27d2c
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
this makes the distclean targets work throughout qt.
the dreaded confclean target is aliased to distclean.
Task-number: QTBUG-8202
Task-number: QTBUG-20566
Change-Id: I7ac8e3b5b0110825dc93e4fa885281db91c6cf83
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
The QImage inplace mirroring method, failed to handle the middle line
when mirroring both ways (rotate 180). In both other mirroring cases
the middle can be left untouched, but in this case it needs to be
mirrored half way.
To make the logic simpler, double mirroring will now mirror half the
lines instead of half of every line.
Change-Id: Iaa1f1e1c3f7dedfb78891fc93207f6d0c64bcafe
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
For the property to take effect, the button must have its
parent set. This might not be the case when a container like
for example QTabWidget is involved. Move the setting of the
property to the bottom of setupUi.
Task-number: QTBUG-44406
Change-Id: Ic2013865a020986475fa28f2e3805c63d4de8ed0
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Return QLockFile::PermissionError when file does not exist, preventing
the stale file detection logic from triggering.
Add Windows-only autotest trying to create a lock file in
a system folder guarded with checks for elevated processes
and UAC virtualization.
Task-number: QTBUG-45631
Change-Id: I1790f8f925660f6bf1df94c2ced901e6ec57cbb0
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Add a special signal spy that records the time and path received
to obtain information on what triggered it for the flaky
cases where more than the expected signals were emitted.
Task-number: QTBUG-30943
Change-Id: I67510ce5e8e19b49c0ca41457f8357b720cade76
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Could causedSSE4 instructions to be used on non SSE4 machines
in cases when qUnpremultiplywas not inlined.
This reverts commit 964ccc5853.
Change-Id: Ic676ade8f75129e8d37c4d96cbfb2bdb5b794919
Task-number: QTBUG-45741
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test tst_QGraphicsIten::sorting is blacklisted but always passing.
Change-Id: I69bbd4b4bbe227267e16ab5558ddabe7d2c0b1b3
Task-number: QTBUG-41342
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
On OS X 10.10. This test is currently failing in CI.
Change-Id: I1b3a33b404c915e83c5e4fa0a7af69d1b941d93c
Task-number: QTBUG-41342
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
- Make the version regexp a member variable, avoiding repeated
construction.
- Use QVERIFY2() with error message for opening files.
- On failure, try to locate the standard diff tool and produce
diff output for comparison, which should make for example
copyright header changes much easier.
Task-number: QTBUG-44406
Change-Id: Ic759899c1da3394e3eb0cee7b1c722f0945714d3
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Dump a stack trace on Linux if the process crashes. This will give us
much better log output in the new CI system. In addition, create a
watch dog thread, that kills the test if the test function times
out (ie. hangs)
Implementations of the stack trace dumping for Mac and Windows
are still pending.
Change-Id: I65426c5afe290a0a2019b881436a0c278f1cafaf
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The test relies on having at least 2 entries, which is not always the
case.
Change-Id: Ief812c598409fe829edb930e563740e5f2213580
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
QMatrix and QTransform can be compared for equality,
so qHash should be overloaded, too.
[ChangeLog][QtCore][QMatrix] Added qHash(QMatrix).
[ChangeLog][QtCore][QTransform] Added qHash(QTransform).
Change-Id: I1ce925ebe258c9d7e35b68e5ac5c3373f1460c58
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This patch fixes several upload corruptions if the server closes the connection
while/before we send data into it. They happen inside multiple places in the HTTP
layer and are explained in the comments.
Corruptions are:
* The upload byte device has an in-flight signal with pending upload data, if
it gets reset (because server closes the connection) then the re-send of the
request was sometimes taking this stale in-flight pending upload data.
* Because some signals were DirectConnection and some were QueuedConnection, there
was a chance that a direct signal overtakes a queued signal. The state machine
then sent data down the socket which was buffered there (and sent later) although
it did not match the current state of the state machine when it was actually sent.
* A socket was seen as being able to have requests sent even though it was not
encrypted yet. This relates to the previous corruption where data is stored inside
the socket's buffer and then sent later.
The included auto test produces all fixed corruptions, I detected no regressions
via the other tests.
This code also adds a bit of sanity checking to protect from possible further
problems.
[ChangeLog][QtNetwork] Fix HTTP(s) upload corruption when server closes connection
Change-Id: I54c883925ec897050941498f139c4b523030432e
Reviewed-by: Peter Hartmann <peter-qt@hartmann.tk>
This caused reverse order of session items in qt creator. Introduced
in ba287c55ef.
Change-Id: I5c37ca6a1ef4753b6449eb9e87b4def5ea858677
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
QVectors can be compared for equality, so qHash should be overloaded, too.
[ChangeLog][QtCore][QVector] Added qHash(QVector).
Change-Id: I2aacce55d416abf2492631a504a02c6e8fc4ff1c
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
QUrlQueries can be compared for equality, so qHash should be overloaded, too.
[ChangeLog][QtCore][QUrlQuery] Added qHash(QUrlQuery).
Change-Id: I626258a938359b49a0cae02012b6cba5ef1fe784
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QLists can be compared for equality, so qHash should be overloaded, too.
[ChangeLog][QtCore][QList] Added qHash(QList).
Change-Id: I9ad91811f12479764cc17d87192539612ceb0b4c
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
In order to obey a palette set globally on QApplication, an application
attribute for checking if it's set at all is added.
Task-number: QTBUG-39800
Change-Id: I26b965e6e18e0e1ca4df03cf343b3527df3636b2
Reviewed-by: J-P Nurmi <jpnurmi@theqtcompany.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Remove the insignificant_tests CONFIG option in favor of a BLACKLIST
file. The tests blacklisted have been found using CI builds logs.
Change-Id: I1a963bdc24f7657731dc0374a8e2c3cbaa49f126
Task-number: QTBUG-22775
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
Merges the SSE4 specific unpremultiply with the normal version, and
adds a SSE2 fallback. There was no reason to split the two since
compile time options will ensure the right version is inlined.
Also adds short-cut for 0 and 255 values.
Change-Id: Ie5aa262f6964219fd3062d4a498f697cf79a4595
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This will be essential on Linux, especially Embedded where PCI IDs are
not that useful.
Change-Id: I2fa8ca07236e8aae203e21fe629d12aab092c7fd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Currently pressed touch point is added to the list of active touch
points in Gui module. It must be excluded from consideration when
we traverse the list.
Task-number: QTBUG-43255
Change-Id: Idddab093b1f6a79122cf18fad7f43bfc93ce7eea
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
[ChangeLog][QtCore][QLockFile] Fixed a deadlock when the lock file
is corrupted.
Task-number: QTBUG-44771
Change-Id: Ic490b09d70ff1cc1733b64949889a73720b2d0f3
Reviewed-by: David Faure <david.faure@kdab.com>
Adds the last two missing source types to rgb64 rendering.
Conical and radial gradients. At the same time linear
gradients are moved to a template form to increase code
sharing.
Change-Id: I30fdd0837b0da03e3447683856ebbe4d7f48df6c
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Cleaning up smoothscale code. Upscaling is improved using existing
optimized interpolation methods, and downscale is given SSE4.1
optimized versions.
Change-Id: I7cdc256c26850948aef7dae26fda1622be6b8179
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
This patch addresses a specific Qml problem, where the meta types list
will grow indefinitely when unloading and reloading Qml components over
and over (in an failed effort to save memory).
The implementation is not specific to Qml though, but will cater to all
use-cases where registered types may not live until the application's
termination.
Change-Id: Ic0224dcd19aeb559715ef088b22a30509be2456b
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Some tests were failing because the color was not read correctly from
a QImage. To make it possibly to read more accurate colors a pixel
accessor returing QColor has been added.
Some tests also had the wrong order of arguments, confusing dest and src
formats. This has been corrected, so they test what they claim to test.
A test for RGB30 linear gradients is also added.
Change-Id: Ic623ae1b8e0bf7383056b641c6e8230a1d7dd0dd
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
After selecting all (enabled) transitions for a microstep, filter out
any conflicting transition. The actual conflict resulution is done by
ordering the transitions in order of the states that selected them.
For example: if an event would trigger two transitions in a parallel
state where one would exit that state and the other would not, this
filtering prevents the state machine from selecting both states (as this
case is an invalid state of the whole machine).
This also fixes the exit set calculation for parallel states when one of
its substates is exited and subsequently re-entered in the same
transition. Previously, the parallel state was not exited, and
subsequent re-entry was ignored (because it was still active). Now it is
correctly exited and re-entered.
A side-effect of the transition ordering mentioned above is it also
fixes the non-deterministic behavior of which of the conflicting
transitions is taken.
[ChangeLog][QtCore] Fixed an issue where the state machine could end up
in an invalid state when transitions from a parallel state were not
checked for conflicts.
[ChangeLog][QtCore] Fixed a case where a parallel state was not exited
and re-entered when one of its substates was exited and subsequently
re-entered.
[ChangeLog][QtCore] Fixed the non-deterministic behavior of picking a
transition from a set of conflicting transitions.
Task-number: QTBUG-44783
Change-Id: I2ee72b6a2f552077bfa7aa4d369474ab62f4c2f0
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
When a history state is entered that has an actual saved history (so not
the initial state), the entry set was calculated wrongly in some cases.
See the bug report for the specific case.
The fix is to fully implement the standard, so method names in the
private class are updated to reflect the names as used in the standard.
Note that, as mentioned in the bug report, the algorithm as described in
http://www.w3.org/TR/2014/WD-scxml-20140529/ has a bug. What is
implemented is the fixed algorithm as described in the current working
draft as of Friday March 13, 2015. This draft can be found at:
http://www.w3.org/Voice/2013/scxml-irp/SCXML.htm
[ChangeLog][QtCore] Fixed an issue where a history state restore would
activate too many states, possibly putting the state machine in an
invalid state.
Change-Id: Ibb5491b2fdcf3a167c223fa8c9c4aad302dbb795
Task-number: QTBUG-44963
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
On OS X the application icon can be changed at runtime, so this adds a way
to set this via the QPlatformIntegration.
[ChangeLog][OS X] QApplication::setWindowIcon now changes the icon for the
application in the dock.
Task-number: QTBUG-43999
Change-Id: Ice298c0bd52f10f4866f37c6d3f20cf5419b7a1b
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
This patch updates the internal color precisions of solids and
gradients to 16bit per color. This makes it possible to render
at higher precision on non-premultiplied ARGB32, the RGB30
formats and any other hi-color formats if more are added.
[ChangeLog][QtGui][Painting] Internal precision of solids and gradients
is now up to 16bit per color.
Change-Id: Ieae5468bd6de1f56adfa4cb9fa966faf2ed824fd
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
We have configure -headersclean now
Change-Id: Iaf576b16d7c756a08ec5c3dfa32deaa343e5e029
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Add an ordinary peek() function which also allows retrieving data from
a specified position. We need this functionality in several places.
Change-Id: Ia4a1b6fe1d7f76cb8f6f1ea34b3e4b89e05a2a68
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QSaveFile is intended to be a replacement for QFile, and should use the
same permissions for newly created files. QTemporaryFile however creates
new files with 0600 mask by default.
Fix this by making the mode_t argument QTemporaryFileEngine uses
configurable, and using 0666 for QSaveFile (like we do in QFile).
[ChangeLog][Important behavior changes] Files created by QSaveFile do
now have the same rights as files created by QFile. This also fixes a
regression in QSettings: In the Qt 5.4 series, new files created by
QSettings were only readable by the current user.
Task-number: QTBUG-44086
Change-Id: Ie1cc20e9f25c6e72e1bc9176490c419c27c5fc82
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
...which constructs a quaternion using specified forward and upward
directions, so that the resulting Z axis "faces" a given forward direction.
Change-Id: Ib77b8ab5c359a4880b0d946face87026acdc6f0b
Reviewed-by: Paul Lemire <paul.lemire@kdab.com>
Reviewed-by: Michael Krasnyk <michael.krasnyk@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
std::vector has them, too.
[ChangeLog][QtCore][QVarLengthArray] Added relational operators <, <=, >, >= if the element
type supports operator<.
Change-Id: I69e16d361fd4738a56b292ebfa78316d28871eda
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
std::vector has them, too.
[ChangeLog][QtCore][QList] Added relational operators <, <=, >, >= if the element
type supports operator<.
Change-Id: Id2bd905e92c0365ad9f439d49908045c8df309c3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QString::append(QStringRef) exists, and so should prepend().
QString::append(const QChar *,int) exists, and so should prepend().
[ChangeLog][QtCore][QString] Added prepend(QStringRef) and prepent(const QChar *, int) overloads.
Change-Id: I3eca41045f7c481be473507e23e92690f3ed7ba3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
... using the framework developed for testing QString::append.
Change-Id: I29011eba6438bf9b3daad354cbec4b8e2b98ed81
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It is tedious to test all the overloads of QString::insert,
so get the help of the compiler to do it. The framework
was originally developed for testing append.
This change showed that the insert(int, QStringRef),
insert(int, const char*) and insert(int, QByteArray)
overloads were missing. They will be added in a separate
commit.
Change-Id: I609b8a05203f8a1ea12827d1798313ace5b719f2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It is tedious to test all the overloads of QString::prepend,
so get the help of the compiler to do it. The framework
was originally developed for testing append.
This change showed that prepend(QStringRef) and
prepend(const QChar*, int) overloads were missing. They will
be added in a separate commit.
Change-Id: Ic3d6ad011bedc6ee7d5024094d7c3529b1b9d669
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It is tedious to test all the overloads of QString::append(),
so get the help of the compiler to do it. The framework
developed for this will be used in subsequent commits for
prepend and insert, too.
Change-Id: I89df581b6d037a5af80b34dd6b5d37ac7484c774
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Unearthed an off-by-one error in a QByteArray::fromRawData() call in
tst_qtextdocumentfragment. Fixed by porting to QStringLiteral.
[ChangeLog][Important Behavior Changes] All conversions from QByteArray
to QString now preserve embedded NULs. This is done in order to provide a
faster conversion from QByteArray to QString that does not involve a call to
strlen. If you need the old behavior, convert from QByteArray::constData()
instead. If you are porting from Qt 4, we suggest to make your source compile
with QT_NO_CAST_FROM_BYTEARRAY before porting to Qt 5.
Change-Id: Ibca40f503920fee6f3a5f0d74a04b38b8849796f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Currently, calling these functions with a null QByteArray will return
a non-null QString because QByteArray::data() never returns nullptr.
This behavior leads to inconsistencies between QString::append overloads,
in particular the QByteArray vs. all others (null + null test always
returns a null QString, except for the QByteArray overload before this
change).
It also is inconsistent with the const char* overloads of these methods,
which explicitly preserve nullness (as verified by test cases).
Fixed by an explicit check for nullness and return of null QString.
Alternative would have been to check for nullness and pass nullptr
instead of ba.data() to the _helper() functions, which do the correct
thing in that case. But since we'd have the check anyway and with the
chosen strategy we can avoid a call to a non-inline method, I opted
against that.
[ChangeLog][QtCore][QString] fromLatin1(), fromAscii(), fromUtf8() and
fromLocal8Bit() now return a null QString when called with a null
QByteArray.
Change-Id: I5f2c0bad27fb73c7d535085af0271823bf6ed1da
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
std::vector has them, too.
[ChangeLog][QtCore][QVector] Added relational operators <, <=, >, >= if the element
type supports operator<.
Change-Id: I0bcb22dfcc43cb0362f17b4e06154ce18646580a
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Commit 748abf9347 changed the message, but
the CI either did not run the QtDBus tests when integrating or it
ignored the results.
Task-number: QTBUG-45317
Change-Id: Iee8cbc07c4434ce9b560ffff13d058f21b73ac05
Reviewed-by: Liang Qi <liang.qi@theqtcompany.com>
Reviewed-by: Alberto Mardegan <mardy@users.sourceforge.net>
It was printing the following error:
arguments to dbus_validate_bus_name() were incorrect, assertion "name !=
NULL" failed in file dbus-syntax.c line 248.
This is normally a bug in some application using the D-Bus library.
Change-Id: Iee8cbc07c4434ce9b560ffff13d0586189ba3a79
Reviewed-by: Liang Qi <liang.qi@theqtcompany.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Two new function families have been added: qFindFirstSetBit() and
qFindLastSetBit() for a variety of integer sizes. Fast implementations
are included for most platforms.
[ChangeLog][QtCore][QtAlgorithms] Added qFindFirstSetBit() and
qFindLastSetBit().
Change-Id: I89d9d1637ea26070aee5a60be95be1b51bfc84dc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The fallback code for unhandled event types in QWidgetWindow::event
directly called event() on the underlying QWidget (i.e. m_widget->event(e)).
The problem with that approach is that it does not activate any
event filters that can have been installed on the top level widget.
Instead, let's use sendEvent to forward the event to the widget.
An extra modification becomes necessary:
the events received when creating/showing/etc. a widget change,
hence the corresponding test needs to be tuned. On the other hand,
apparently this fixes a long time XFAIL in that test.
Task-number: QTBUG-42281
Task-number: QTBUG-26424
Change-Id: I237bbbc301e3e9e10f071589629c71343a600ef9
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Add a dedicated operator=(std::initializer_list) that
first resizes the QCLA, and then replaces the elements
one by one.
This should be usually faster than creating a temporary
QCLA and then copying it, except for the case where the
new array does not fit into the allocated stack - but this
is IMO nothing to optimize for.
Task-number: QTBUG-45041
Change-Id: I147d6d01186b1ca3c635b2c8365d8f6e638ce6fe
GPush-Base: 08de3113051e1289f0de0651ec5647c9ee6feb27
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QOpenGLContext::defaultFramebufferObject() knows nothing about QOpenGLWidget
and QQuickWidget. The problem is that this function (and others that rely on it)
is expected to give the widget's backing FBO in paintGL() and friends.
To overcome this, we have to provide a way for such widgets that indicate what is
the expected "default fbo".
Task-number: QTBUG-43269
Change-Id: I43f439f8609382b9f7004707ab0ef9f091952b4f
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
When the size adjust policy is QComboBox::AdjustToContents, the combobox
sizeHint was recalculated on dataChanged, rowsInserted, rowsRemoved,
and setModel, but not when the model was reset. This led to truncated
items in the combobox when models are filled asynchronously.
Task-number: QTBUG-5413
Change-Id: I3456c327d680dfffa58d6dcb26c79456c67b2a32
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Concept of 'current position' exists only for random-access devices.
As documented, for sequential devices QIODevice::pos() must always
return 0. Prevent a modification of the internal 'pos' member in
QIODevice::readAll() method to follow this rule.
Change-Id: Ida2ee6a629ccfc3068d62f95ab1064ada13fdda5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Tests are now passing in CI.
Change-Id: I0051fb7070c1c1027c557eba9dde6367ad59ac7a
Task-number: QTQAINFRA-837
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
+ A bunch of fixes in the locale data
+ New scripts from Unicode 7.0
+ New locales
- Some locales disappeared (aa_DJ, aa_ER, st_LS, ss_SZ, swc_CD, tn_BW)
- Some locales lost their contents (i.e. en_Dsrt_US)
[ChangeLog][QtCore] QLocale data updated to CLDR v.27
Change-Id: Iba8c7884f8087e577cbb25a8fc106dd7bd3ebb5d
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
* Two newly adopted currency symbols:
the Azerbaijan manat and the Russia ruble
* Pictographic symbols (including many emoji), geometric symbols,
arrows, and ornaments originating from the Wingdings and Webdings sets
* Twenty-three new lesser-used and historic scripts
extending support for written languages of North America, China, India,
other Asian countries, and Africa
* Letters used in Teuthonista and other transcriptional systems,
and a new notational set, Duployan
For more details, see http://www.unicode.org/versions/Unicode7.0.0/
The Properties struct's .*Diff members were narrowed down
to signed 15 bits and the unicodeVersion has been expanded to 8 bits.
[ChangeLog][QtCore] Unicode data updated to v.7.0
Change-Id: I93ab6f79fa3b05f61abc7279f1d046834c1c1a0b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Instead of making insignificant the all platform for
QtBase 5.5 integration.
Change-Id: Ief3f29c094bdbc90e684f19c1077ee595fb7d581
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
When in commit db15341d27 I added support
for testing TXT, I used the space character to make it easy to
concatenate the records. Unfortunately, that means it's easy to false-
positive the test by creating one record with a single entry containing
a space instead of two entries.
So use the NULL character instead.
Change-Id: Ia0aac2f09e9245339951ffff13c7d239ea83583d
Reviewed-by: Jeremy Lainé <jeremy.laine@m4x.org>
Reviewed-by: Richard J. Moore <rich@kde.org>
There appears to be at least one fix, related to sign- or zero-extension
in the call to isspace(). So it's a good idea to update again. This also
brings the behavior to match strtoll and strtoull on Linux, including
the fact that strtoull will parse negative numbers. For that reason,
qstrtoll and qstrtoull are now wrappers that try and keep the behavior
that we used to have.
This update also changes the code from a 4-clause BSD license (bad) to a
3-clause BSD license (good).
Change-Id: I73b01b02ebd1551bf924599d52284ad25cc1def0
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
When CSS is set in a head tag then it was not being inherited by the child
tags when the CSS specification indicates that the properties are in fact
inherited. This ensures that those properties are inherited and the non
inheritable ones are unchanged.
A test is added to cover the different situations with inheritance and a
fix is done for the QTextDocumentFragment test which was passing despite
having incorrect defaults.
Task-number: QTBUG-28770
Task-number: QTBUG-34153
Change-Id: I55966240845a885852a04ecb82c61926dea9f800
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
When building the test while qtbase has been installed and the
build dir was removed, the include paths were not found in
frameworks builds.
Change-Id: I32d9e61176a5e19c86095580ddad6914f25ff952
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
NSAccessibility has no explicit analog for
QAccessibleActionInterface::toggleAction(), checking checkboxes/radio
buttons is handled by NSAccessibilityPressAction. So ensure exposing
the action properly on OS X so that VoiceOver users can check/uncheck
checkboxes, select radio buttons etc.
Change-Id: Idc8b048de2313a3e875a929516baf3dded9c68cc
Task-number: QTBUG-44852
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
In order to support testing values of more accessibility attributes
and parameterized attributed, we provided some "infrastructure" to be
able to query them with minimal effort. We also reworked current 6
supported attributes to use this new way.
Change-Id: Id0ceb59aa0fe063c9aedad27cffcc3aef0899d7f
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
textEditTest in qaccessibility test was using QTextEdit::setCurrentFont
on second pass, but that did not change the font used for text in any way.
I don't know what was the purpose. So I changed it into something that
made sense to me and actually tests text with a different font on second pass.
Also fixed characterRect function in tests to use correct font/format.
Change-Id: I843c5b29f8048196ec3405b6717655e77b567dbb
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
On a high resolution display the test will potentially create a text
edit that introduces line breaks and these make it fail then.
Change-Id: I38807a9b3b511478a1742c4422a97c1cb3395a02
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
Without QProcess support we do not run test which initTestCase is
trying to find.
Change-Id: Icecaad90f61a019489e372517a6d62372155bd46
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Implement an initializer_list constructor, which was probably
just forgotten so far. Technically this is a SC incompatible change,
since
QVarLengthArray<int> array = {10};
will now create an array with one element 10, instead of an empty array
with a reserved size of 10. Anyhow, keeping the inconsistency with the
STL / other Qt containers here would certainly do more harm than good
in the long run.
Task-number: QTBUG-45047
Change-Id: I4675880f93e141181250939942fa32300916b0e3
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Since Qt 5.0, static overloads of QChar has a uint parameter only,
so there is no more ambiguity between uint<->ushort and thus some tests
does not make sense anymore; avoid explicit cast to uint for the others.
Change-Id: Ibc7a2ac4de63d3f023a8dbb5e53211ef8521579d
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Storing the position of the first selected item in the view can lead to
wrong extended selections if the contents of the model change. Future
Shift-clicks will always use the previous position of the first selected
item, which may not be correct any more, to calculate the current
selection.
To fix this problem, a QPersistentModelIndex is used to keep track of
the first selected item.
A new unit test is added. Moreover, one function of the QTableView unit
test is changed such that it shows the view prior to performing the
test. Without this change, this test may fail. That the test, which
simulates mouse presses without showing the view, worked at all seems
to be a coincidence, as pointed out in QTBUG-18009.
Task-number: QTBUG-18009
Change-Id: I0d844fbd1a994c279a7c8ee5d9b5b9fccecd25bf
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
If a cosmetic polyline contained a 1-pixel segment, the next segment
would be drawn with wrong starting point.
The original fix for QTBUG-26156 had some unwanted side effects
(QTBUG-31579 and now QTBUG-42398). It tried to skip start-point update
if stroke() did not actually draw anything (because the segment was
too small). However, to determine that, it tested for a change in
lastPixel. But that was not failsafe; in some cases (1-pixel segment),
lastPixel could be unchanged even though the segment had been
drawn. With this change, we instead test directly whether stroke()
skipped the segment or not.
Task-number: QTBUG-42398
Change-Id: Id751db69a18cd1af4f45070db9d5698aa532d22a
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
When the ComboBox currentText() was changed by key
LineUp or LineDown or mouse click, the completer still
contained the last inserted characters.
If now all text was selected (by Ctrl+A or selectAll()),
the old item and index was restored on next Enter press.
Task-number: QTBUG-41288
Change-Id: I6916fd31c8b8fbacfb12e1a62c3e46823cf918b4
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
Added casting to QT_OFF_T type. Otherwise fails on some
compilers.
Change-Id: I4f1f0c558af7d182a4babf38a7f048b27b3db611
Reviewed-by: Pasi Petäjäjärvi <pasi.petajajarvi@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When using non latin keys, remove() could cause corruption
of the json object.
Task-number: QTBUG-42270
Change-Id: I7305e57ebb78630a9bf68bc4f831a6d1646abb79
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
ICU doesn't support iso8859-16, so we need to fall back to
the Qt codec for this encoding.
Task-number: QTBUG-45053
Change-Id: I9754cf098c906fe8a75363a3d090029543cd0e35
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QObject::connect tries to determine if the arguments are registered
metatypes. This used to work even for arguments that were forward
declared. But now, the metatype system tries to call
QtPrivate::IsQEnumHelper<T>::Value to know if it is registered.
That fails on gcc if T is forward declared.
Apparently gcc needs to know the full type of T to pass it in the
ellipsis function, even within a sizeof expression.
So change the ellipsis expression to a template one.
Task-number: QTBUG-44496
Change-Id: I7fa07bd3cde470b134c2ec53b0d581333d16a6f1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This system is no longer in the CI rotation and we haven't had reports
of the same issues happening on later versions. Either the issues have
since been fixed or they were never an issue in Qt in the first place.
This commit has the additional benefit of getting rid of the following
shell error when qmake was run:
sh: line 0: [: =: unary operator expected
as /etc/lsb-release hasn't contained DISTRIB_CODENAME for some time and
proper quoting was never implemented (not even qtcpsocket.pro).
Change-Id: Ia0aac2f09e9245339951ffff13c829e910ee64e9
Reviewed-by: Albert Astals Cid <albert.astals@canonical.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- removed an unused field
- initialized variable that might be used uninitialized.
Change-Id: I7a7a063f025ecc32fa462dd8d5e2485c2ba52eb8
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Properly QSKIP tests that use disabled QProcess and symlink
features instead of excluding them silently by #ifdef.
Other reason is that moc doesn't respect QT_NO_* defines
in class definition which causes build issues on some
platforms.
Change-Id: I041020f7452f7d36c7ec8a5866a4ba5eb23d1f94
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
Other parts of tst_qudpsocket.cpp already did this check.
Change-Id: Iee8cbc07c4434ce9b560ffff13ca545a03c9596a
Reviewed-by: Richard J. Moore <rich@kde.org>
The QDBusMessage::createSignal() static method doesn't take a parameter
for specifying the destination service of the signal. While this is not
a widely used feature, it can be useful to avoid waking up all connected
clients when the service knows what are the clients which are interested
in the signal.
This commit adds a QDBusMessage::createTargetedSignal() method which
also takes the destination service as its first parameter.
Change-Id: I9fdca53673a6944c39c93c1efd69a9d02859684e
Task-number: QTBUG-44704
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
NSAccessibility has no explicit analog for
QAccessibleActionInterface::toggleAction(), checking checkboxes/radio
buttons is handled by NSAccessibilityPressAction. So ensure exposing
the action properly on OS X so that VoiceOver users can check/uncheck
checkboxes, select radio buttons etc.
Change-Id: I54b47515cc4882ecf0544c7351bd3c9046023a44
Task-number: QTBUG-44852
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
Add setters for an int verbosity to QDebug. The streaming operators
can check on the setting and output more information accordingly.
[ChangeLog][QtCore][QDebug] How verbose a single debug output should be
can now be fine-tuned by setting a verbosity on the debug stream.
Change-Id: I77001fcf1ef090a580d1a137bb5a667fc1bf1e1b
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
