a) qmlimportscanner has no built-in -importPath, so it can't be omitted
even for non-prefix builds, and b) the QMLPATHS variable is also used
further down, so we can't just do away with it.
amends a658fa40.
Change-Id: I42a47a82fe13694fbac3c4a3962ebbe1d7e7865b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
it helps enormously to use the flag correctly.
amends f0c34eb08f.
Change-Id: I04a63cc59e133169d9f6677f2f88ef98fd5c524c
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the condition is now consistent with that of the target itself (which
means that by setting target.CONFIG=no_dll one can actually suppress
installing the target itself even if it's not a dll, but anyway).
Task-number: QTBUG-39253
Change-Id: Id4684a550a33b463594ab537eaa9e1cbfb61e4ff
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
qdoc uses the indexes as "precompiled headers" to obtain type info
necessary to properly parse sources.
the indexes needed are the ones the module actually depends on
(publically).
Change-Id: I6aad0b511d2534d584f7947c8d800300eede94ff
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
the doc/ dirs in the build dir won't be created until the docs have been
built, so of course checking whether they are there during the qmake
phase is counterproductive.
this also means that we'll get some complaints about non-existing
directories (for repos that don't create any docs). there is no
reasonable way to query qmake which repos are affected, and writing
shell-specific code to query it at make time seems a bit overengineered.
Task-number: QTBUG-38862
Change-Id: Ie0588e75bfc39718fffd46f0df6785428e396eb2
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
the install dir may contain indexes from previous builds. a build must
never refer to previous builds.
Change-Id: I67c04df8f3f82bdbebb67e280f70795ed0a76ccf
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
even if we are not doing a top-level build, we still need to specify an
index dir. that may be the install dir or the qtbase build dir,
depending on whether we are building against an installed prefix build
or a non-prefix build (building against non-installed prefix builds
outside a top-level build is inherently impossible).
Task-number: QTBUG-35596
Change-Id: Ia37d429855480d3bfe36b7ee29e087029861bfc5
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
instead of adding all possible plugin paths (for which QMAKEMODULES
wouldn't have been a reliable source anyway), only add the paths of
plugins of the necessary types.
this necessitates that we create qt_plugin_<foo>.pri files also in shared
builds of qt when making a prefix build. we don't install them unless it's
a static build, though.
Change-Id: Ib56b009562a7131d4dc4dfc259b34ec6581b0f77
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Adds QApplicationPrivate::usesNativeStyle to check whether the
QApplication is using the native platform style.
This can be needed internally to decided whether to let the platform
plugins do stuff or do it interally, style dependent. E.g. letting the
platform plugin popup a QMenu vs. letting the style draw one.
Change-Id: Ibb5e11a4d9d1d2824685ff146786a9354ceef43c
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Some codecs can't handle the range outside ascii properly and would then
fail to read the data back in correctly.
Task-number: QTBUG-15543
Change-Id: I4c02921e787a939eeec0c7a11603b5896d756aef
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Store the value of QMessageBoxPrivate::autoAddOkButton
temporarily when automatically adding the "Show Details..."
button.
Task-number: QTBUG-39334
Change-Id: I173c83893548ee83b3d8ea2743f87686c32657e7
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
There are no automatic updates of the window when it moves, since
this is not required on most platforms. This broke drag and drop on
Android, because drag and drop creates a temporary window containing
a pixmap with a snapshot of its content. We need to make sure the old
and new location of the window is repainted when it has moved.
[ChangeLog][Android] Fixed repaint issues in drag and drop.
Task-number: QTBUG-35975
Change-Id: I7b043d728551d9963fb5acec804fb90aec5b50ff
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
This is pretty much the same thing that eglfs does.
Task-number: QTBUG-38960
Change-Id: Ibf310ca8e3a4e31e5310ab3a3d3e851eae31a4ad
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
There were several issues on startup of the application which
were caused by the fact that we would get the wrong
available screen geometry on startup, set this as the
initial surface size and then expose native windows with this
size. This would cause first a flicker of white on the early
expose and the window contents to jump around as the window was
resized to the actual available space on screen.
The fix for this is to postpone the first expose until we have
actually got a proper screen size from the main layout. We use
width,height = 0 as an indicator that the available geometry
is not yet known, and we skip posting any expose events before
this is set by the layout.
In addition, since we removed the surface before we shut down
the application, it was by a white rectangle before the
shutdown transition happens, and this white rectangle will
be animated instead of application contents.
To rectify this, we make sure the last surface in the stack
remains in the layout until it is either replaced by a different
surface or until the application has shut down. This way, the
shutdown animation will work on this surface instead.
[ChangeLog][Android] Fixed regression where there would be flickering
on startup and shutdown of the application.
Task-number: QTBUG-38960
Change-Id: Ia1579ca8c522d8beeab066f78070ad49009d0238
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
QCocoaEventDispatcher stores user input events in a queue in certain
cases. If the target of those events is destroyed, the events are later
sent to the stale window, causing a crash.
Task-number: QTBUG-39211
Change-Id: Ie55d2df5697c742bcb644ebf8c5028015a0b8148
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Don't interrupt the Qt event loop if the Qt event
loop isn't running (meaning processEvents has not/
will not be called). This can happen in the QMacNativeWidget
or plugin case where the native code calls [NSApp run]
and QApplication::exec() is never called.
In Qt 4 this was not necessary since UI event
processing was more direct: QCocoaView would call
QCoreApplication::sendMouseEvent/sendSpontaneousEvent
directly on mouse events.
Task-number: QTBUG-36225
Change-Id: I2894cbbca66a902652c9f8bc916e94ad8ce0e18e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Block flush until all bits have been flushed. This prevents Qt from trying to
draw over the buffer while it is still being cleared.
Change-Id: I49b90a7653ec3768411a1a94837bb31fec4d44e8
Reviewed-by: Frank Osterfeld <frank.osterfeld@kdab.com>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Bernd Weimer <bweimer@blackberry.com>
If QNX does not have inotify there is no native engine.
Change-Id: I042efd0b59f916f9e0b55bbe5c7f3fe7bb6914c8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
CRT dependencies should contain "Phone" in the name.
Change-Id: I1b0de01df6a016c20b59232f6068e9bb87e3f18c
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
HSTRING needs to be released or handles will be leaked.
Instead use HString which takes care of resource management
on its own.
Task-Number: QTBUG-38115
Change-Id: I2c767776c1f22f45acd8dd77b693f30d63d894b9
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Testing whether alphaBufferSize() != 0 does not work, because when no alpha
channel is present, alphaBufferSize() can return '-1', which will cause
non-transparent windows to be wrongly cleared and an artifact will appear.
Change-Id: Id9e985f105c0bb302cc6f53960a5dbae2acdb921
Reviewed-by: Frank Osterfeld <frank.osterfeld@kdab.com>
Reviewed-by: Wolfgang Bremer <wbremer@blackberry.com>
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
It will now share the same behavior as QGroupBox, which has NoFocus
if its not checkable.
This doesn't lure AT clients to stop and read its content (this is the
case for android accessibility) (designer seems to generate a tooltip
for each QDialogButtonBox, which will be read as the name).
Change-Id: I6cfacdd9c01299521222c773634df1e36971d982
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
gestaltSystemVersion's encoding only has room for a single version
digit. Thus, OS X 10.10 would previously have been detected as OS X 10.9
(Apple's comments in the header even warn against this).
Change-Id: I41c35b1507d39e2958a9aaffaa8c48ac380f61d9
Reviewed-by: Samuel Gaist <samuel.gaist@edeltech.ch>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QSignalBlocker resets to the previous state, which might have already
been a blocked signal state.
Task-number: QTBUG-39352
Change-Id: I918cc6ea346755b940e027cee5d6704824fbba32
Reviewed-by: David Faure <david.faure@kdab.com>
Instead do it only once (in registerNatives). This is seems to be the
preferred way of doing it in other parts of the platform plugin.
Change-Id: I361a7862bb5a24b4024c7c6a30ecb14fc515d4ff
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
a162a3cb (Android: Add "unversioned_libname" configuration, 2014-04-23)
removed the version for shared libs on Android. This change updates
the generated CMake files to support that.
Change-Id: Ia6ef04872c664bd4c31546456a82730babed2910
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Qt5 allows QAIM subclasses to reimplement the sibling() method. Unfortunately,
the default QAbstractProxyModel's reimplementation differs in behavior to what
the Qt4 version was doing. In particular, the Qt4 version used to use the row
and column as positions within the proxy model, while the Qt5 version mistakenly
does this at the level of source model. This is arguably broken; the caller asks
for a sibling of the proxy index, not for a sibling within the proxy model.
This change makes the QAPM::sibling work explicitly in the same way as the Qt4
code behaved.
The reimplementation of QAbstractProxyModel::sibling was introduced in
9dfba89c28. It was subsequently fixed with commit
999109866d not to return indexes from the source
model, but the logic was still different from the Qt4 version.
[ChangeLog][QtCore][QAbstractProxyModel] Fixed QAbstractProxyModel::sibling to
work in the same manner as the Qt4 code used to behave. Previously, Qt5's
implementation would treat the row and column as positions in the source model
instead of a position in the proxy itself.
Followup-to 9dfba89c28 and
999109866d
Change-Id: Ia25027b2ad9e4777ba28de2d2226d48f8cccf587
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The sanity check added in d16508a285
didn't actually catch the case where the invalid data is large
enough to contain the offset table and table directory. Added sanity
checks to all the code that accesses the font data now, so this
should fix crashes with partial data as well as invalid data.
Task-number: QTBUG-37190
Change-Id: Ie43f10d8cf0b09007783b9b1c4d91bfed8c6b0f0
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
identified by static analysis from
http://www.viva64.com/en/b/0251/
Change-Id: I0042336d9598415b978bf9819e74639685c627b5
Reviewed-by: Martin Smith <martin.smith@digia.com>
This patch removes the need for the user to put a dot at the end of the
bundle prefix which makes it's use more consistent and intuitive.
The prefix is based on what Xcode calls the "Company Identifier",
basically "com.digia" plus the product name. Changing that to
"com.digia.prefix-" and the product name to "Foo" results in a bundle
identifier of "com.digia.prefix-.Foo" which is in line with Xcode.
Change-Id: I9b62fc4dee1df51b523ce890a8896ea58ea2c62d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
-transferred group page from qtdoc repository
-added description in example pages
-set the example documentation to use the standard Qt thumbnail
-added an entry in the help index for the example page
Change-Id: I9d5747bc329b5ecc15acd2eb3139696931166c6f
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Call [NSApp endModalSession] at the correct time.
Calling cleanupModalSessions() from processPostedEvents()
resulted in endModalSession being called from within
[NSApp runModalSession] - ending and cleaning up the
the modal session while Cocoa is still using it.
Move the cleanupModalSessions() call to to after
runModalSession returns.
Task-number: QTBUG-37699
Change-Id: I5868def36f6869667b0bbe33733286e3e49488eb
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
This reverts parts of commit d9875f7bff,
in particular the code for "2. Make interrupt() use [NSApp abortModal]"
abortModal is not the right way to end a modal session,
and introduced bad side effects, as reported in
QTBUG-34677.
Restore this part of the event dispatcher to the
Qt 4 state.
Change-Id: Iacc2d4a0757807c87c4320c93ed4db186622945c
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
This reverts commit ff3dcc49c4.
The reverted commit is an incorrect bug-fix for a
regression introduced by adding a call to
[NSApp abortModal] in change d9875f7b.
Change-Id: I1307d1790ada740e0552d62267b6009cbccd6c4c
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
This reverts commit a9cbddf473.
The reverted commit is an incorrect bug-fix for a
regression introduced by adding a call to
[NSApp abortModal] in change d9875f7b.
Change-Id: If23463ebdfe2ff64c68739dbece73a13773683c9
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Call clear() in the destructor of QOpenGLTextureGlyphCache class to
prevent QOpenGLGlyphTexture object leak.
Change-Id: I290b09b0786d30603391e6855a21e9232b112739
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
These functions are not used anywhere. Since the classes are not
documented, we're free to remove the inline functions.
The implementation of the const function in QMapNode is also bogus: it
discards a const qualifier.
Task-number: QTBUG-39301
Change-Id: Ib8fd10a4da4b58a62cef17017ea6127c4d964325
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
QRasterPaintEngine::alphaPenBlt makes the assumption that a device with
bit depth 32 has optimized alphamapBlit and alphaRGBBlit routines.
This will fail on RGBA8888 format resulting in some text not being
rendered.
Change-Id: Ia7d88bb0e3094894affceda1acc42396b67b3677
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
Note added in QNetworkReply and QSslSocket documentation.
Task-number: QTBUG-16770
Change-Id: I2dd8cfb913ec29a96b5465a905cd213713b8d537
Reviewed-by: Richard J. Moore <rich@kde.org>
This change improves the synced resizes of xcb windows and adds support
for synced resizes of glx windows.
The QXcbWindow keeps a better track on whether the window manager
expects a sync and can be in one of three states:
* no sync required
* sync required, but configure notify event not yet received
* sync required and configured
By tracking this in the QXcbWindow itself the backing store can make
use of this information and doesn't need an own heuristic to decide
whether a sync is needed.
Also this allows to add support for synced resizes of windows with an
OpenGLSurface. This is accomplished by checking the sync state after
swapping buffers. As the OpenGL context may be bound to a background
thread the sync is done using a QueuedConnection to ensure that the
sync happens in the thread which created the xcb window.
So far this is only added for GLX.
This significantly improves the resize experience of QQuickWindow and
also the initial mapping with a composited window manager in case the
compositor uses the sync protocol to determine whether the window is
ready to get painted on screen.
Change-Id: Ied0261873043d785dec652d2821fc3638292fa36
Reviewed-by: Uli Schlachter <psychon@znc.in>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
If the call to SQLNumResultCols fails for whatever reason then it will
not be correctly caught since the count might be higher than 0 since it is
uninitalized. This ensures that if it fails then it does not try to act as
if it succeeded.
Task-number: QTBUG-39137
Change-Id: Ifae8c1f7fac8416643f2317747f87295642a7935
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
For ASCII content, this improves the throughput because the conditional
is no longer on the codepath to storing, so the processor can perform
the store at the same time as it's doing the movemask
operation. However, the gain is mostly theoretical: benchmarking with
mostly ASCII content shows the algorithm running within 0.5% of the
previous result (which is noise).
For non-ASCII content, we're comparing the cost of doing a 16-byte store
(which may be completely overwritten) with the loop copying and shifting
left. Benchmarking shows a slight gain of a few percent.
Change-Id: I28ef0021dffc725a922c539cc5976db367f36e78
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@digia.com>
The static initialization of QDBusConnection::systemBus() can occur
before the creation of QCoreApplication. This causes a warning from
QDBusConnection and may cause the application to crash on exit.
Since QDBusConnection::systemBus() is just an accessor, there is no
real advantage to storing a static reference to it.
Task-number: QTBUG-39248
Change-Id: I4401810c7c2ffd21a30f9ffd41b3a46e7e09214c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
