The code was assuming that if the parsing of the value worked,
then it must be a list of 4 variants. But in this case it's just
a single length.
This came from <td> using 4 values for border-width
while other elements use a single value. But the storage
is shared. So the fix is to use 4 values everywhere.
When reading 4 and there's only one, it gets duplicated,
so the caller can just use the first one in that case.
Task-number: QTBUG-80496
Change-Id: I682244b6e3781c4d673a62d5e6511dac263c58e8
Reviewed-by: Nils Jeisecke <nils.jeisecke@saltation.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
It was converted over ARGB32PM, when it should have been directly
converted to not lose accuracy, instead there was an unnecessary direct
ARGB32->RGB30 conversion, which was converted to the necessary type.
This also improves the selection of conversion over ARGB32PM or RGBA64PM
for ARGB32 and RGBA8888 by using 32-bit conversion when alpha is not
relevant.
Change-Id: I5990d8a23b2909d3910d8c1213fa46477742b052
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
You can save a "skeletal" document with list items to fill in later,
the same as you can do in HTML or ODF format. Reading them back via
QTextDocument::fromMarkdown() isn't always perfect though.
Fixes: QTBUG-79217
Change-Id: Iacdb3e6792250ebdead05f314c9e3d00546eeb9f
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The markdown parser generates empty lists in some cases when a character
that can be used as a bullet is found on a line by itself.
cbEnterBlock() and cbLeaveBlock() are called symmetrically in such cases.
QStack::pop() on an empty stack triggers an assert, so push and pop need
to be done symmetrically too. But it's difficult to actually create the
list as soon as the MD_BLOCK_UL or MD_BLOCK_OL callback occurs, without
breaking the case fixed in 7224d0e427 (and
probably other cases). That's because QTextCursor::insertList() creates
a list item at the same time as it creates the list itself, and also
inherits block formatting from the previous block. We now insert empty
lists with empty items whenever the need for that is detected though,
and there's a failsafe to prevent popping in case something still goes
wrong with that logic. We aren't strict about reproducing the original
markdown when regenerating it via toMarkdown(), but it's getting closer.
Fixes: QTBUG-78870
Change-Id: Ided194ce7aec2710c60dbac42761ee4169ed9b78
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Robert Loehning <robert.loehning@qt.io>
If a font with only a family set is resolved with one that has been setup
with setFamilies() then the family needs to be prepended to the families
list after resolving. This is so that the font still prefers the one set
as just a family with no famillies set.
This also amends the QFontDialog test to account for this too.
[ChangeLog][QtGui][Text] Resolving a font that just has a family set
with families set will prepend the family to the families so that it
is still the first preference for the font.
Task-number: QTBUG-46322
Change-Id: Icc4005732f95b2b4c684e592b06b31e133270e44
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Call adjustedFormat() as advised by the docs: "Applications are advised
to set this format on their QWindow in order to avoid potential BAD_MATCH
failures."
Task-number: QTBUG-79659
Change-Id: Ibf415fb0ee64bdd3f01d4ba744244bce811c0d27
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
During the creation of a raster paint engine in QImage::paintEngine(),
the QImage will be detached. At least old gcc versions would get
confused so that the newly created paintengine would end up in the old
QImage copy insteads of the newly detached one. Work around by
dropping the temporary engine pointer.
Fixes: QTBUG-79383
Change-Id: I27b1f24312269bc2bcc641dc4334397a92e3bfbb
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The default font on Windows ("Times" is not found) does not have
a ligature for "fi", so the test would not actually be testing
what it was supposed to on this platform, and would pass even
when the code was buggy.
To enable the test on Windows, we select a standard font which
has the ligature (Calibri).
Change-Id: Ic117cd8e549aa729a0cd68006d7c180c6c89c053
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
For some scalings, setClipRect(QRect) would produce a clip one pixel
different from setClipRect(QRectF) because of different
rounding. Ditto for setClipRegion. Fix by making sure to transform
QRectFs instead of QRects.
Fixes: QTBUG-78962
Fixes: QTBUG-78963
Change-Id: I0be721133858c30769ec6d81e978962a3d6b70cf
Reviewed-by: Christoph Cullmann <cullmann@kde.org>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
QDesktopWidget is marked as obsolete in docs, but it is not yet
completely deprecated, some of its methods are still in use.
Replace uses of the following methods marked as obsolete:
- QDesktopWidget::screenNumber(QWidget*) -> QWidget::screen()
- QDesktopWidget::screenGeometry(QWidget*) -> QWidget::screen()->geometry()
- QDesktopWidget::availableGeometry(QWidget*) -> QWidget::screen()->availableGeometry()
Task-number: QTBUG-76491
Change-Id: I2cca30f2b4caa6e6848e8190e09f959d2c272f33
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
There is no onscreen support for WinRT in the D3D11 backend yet.
However, offscreen operations (rendering into a texture) should work.
One catch is that there is no D3DCompile available for deployed WinRT
apps. So ship the intermediate format (DXBC output from fxc) in the
.qsb files.
Change-Id: Ic0aba4b817c27d13dcf3af41bf7612d799382655
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Also improve (docs and runtime checks) and test the minimum set
of required data to create a graphics pipeline.
Task-number: QTBUG-78971
Change-Id: If5c14f1ab1ff3cf70f168fde585f05fc9d28ec91
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
The joys of "level - Specifies the mipmap level of the texture
image to be attached, which must be 0." for glFramebufferTexture2D
in OpenGL ES 2.0.
Change-Id: Iaf19502f48d7ba73b26abb72535bfa6696a1e182
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
...and make the Null backend able to deal with these, for RGBA8 textures
at least. Naturally it is all QImage and QPainter under the hood.
Also fix a bug in the OpenGL backend, as discovered by the autotest:
the size from the readback did not reflect the mip level.
Task-number: QTBUG-78971
Change-Id: Ie424b268bf5feb09021099b67068f4418a9b583e
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
This also marks the beginnings of significantly extending autotesting
of the resource and rendering functionality in QRhi.
Also involves fixing up the buffer operation lists like we did
for textures before. This is to ensure updates and reads on the
same batch execute in the correct order. So just have two lists:
one with buffer, one with texture operations.
Also simplify the struct layouts. No need for those inner structs
with many duplicate members. This reduces the size even, since using a
union was never an option here. Also switch to a VLA, the size is around
253 KB per batch.
The Null backend now keeps track of the QRhiBuffer data so it can return
valid results in readbacks.
Task-number: QTBUG-78984
Task-number: QTBUG-78986
Task-number: QTBUG-78971
Task-number: QTBUG-78883
Change-Id: I9694bd7fec523a4e71cf8a5c77c828123ebbb3bd
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Properly return an invalid frame when calling jumpToFrame()
with a non existent frame number.
Fixes: QTBUG-79029
Change-Id: Ic40f4a6de3106fab42c0bb6c961194be47b04e31
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
It is conceivable that during the try-compare loop of processing
windowing system events we loose and regain the focus. That would
explain the occasional test failure where instead of the expected 3
focus in events, we have received four.
Task-number: QTBUG-77769
Change-Id: I2221440d09a74d4d18a72f7786232b4491cf45a8
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
(cherry picked from commit 56f084781e)
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
One of our compilers for emscripten coerces all signaling NaNs to
quiet ones, so won't do any actual signaling. Anyone relying on them
to do so shall be disappointed, so it's better that they know about it
at compile-time - or, at least, have the ability to find it out.
Put the signaling NaN producers (and remaining (test) code using them)
under the control of a feature that's disabled when numeric_limits
claims double has no signaling NaN. Assume the bootstrap library
doesn't need signaling NaNs. Sadly, until C++20 <bit>, there's no
contexpr way to test that alleged signalling and quiet NaNs are
actually distinct.
Added some auto-tests for signaling NaN, including that it's distinct
from quiet NaN. Any platform on which the last fails should disable
this feature.
Task-number: QTBUG-77967
Change-Id: I57e9d14bfe276732cd313887adc9acc354d88f08
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The test was found crashing with software rendering in Qt 5.7.
Removing the insignification revealed that there are failures
on WinRT as well, blacklist them for the moment.
Task-number: QTBUG-78802
Fixes: QTBUG-49630
Change-Id: Ib1a3efe69d7b63cdd98c6da364ab09e0e2dbdf62
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
The DefaultFontFallbacks.plist system file that we used for looking up
style fallbacks does not exists in macOS 10.15, nor did it ever exists
on iOS. Instead of relying on this file, we hard-code a set of default
families, that we then look up the fallbacks for.
The result of QFont::defaultFamily() on macOS is now:
QFont::Helvetica --> "Helvetica"
QFont::Times --> "Times New Roman"
QFont::Courier --> "American Typewriter"
QFont::OldEnglish --> ""
QFont::System --> "Lucida Grande"
QFont::AnyStyle --> "Lucida Grande"
QFont::Cursive --> "Apple Chancery"
QFont::Monospace --> "Menlo"
QFont::Fantasy --> "Zapfino"
And on iOS:
QFont::Helvetica --> "Helvetica"
QFont::Times --> "Times New Roman"
QFont::Courier --> "American Typewriter"
QFont::OldEnglish --> ""
QFont::System --> "Helvetica"
QFont::AnyStyle --> "Helvetica"
QFont::Cursive --> ""
QFont::Monospace --> "Menlo"
QFont::Fantasy --> "Zapfino"
Fixes: QTBUG-78240
Change-Id: Ie9bc13c9c1031d89f024199e4736a046c568a48d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
BT.2020 is an HDR color space and its luminance range doesn't match
that of the rest of the currently available color spaces. Without
support for white-point luminance in 5.14, there would be a behavior
change when luminance support is later introduced, so it is better to
remove it now, and reintroduce it when the necessary handling of
different luminance levels is available.
Change-Id: Ie29e4dd757faae3ac91d4252e1206acce42801dc
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
We don't need a getter for the 'preset' of a color-space, as color
spaces can be compared to the presets directly. This allows us to
remove the Undefined and Unknown values from the presets.
Internally we still distinguish known presets from unknown or undefined
presets via the magic 0-value. The validity of a QColorSpace is not
based on this preset, but on its actual values.
Fixes: QTBUG-77963
Change-Id: I1e0a2a4be83021b8c82b3c778019f680fd46455b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Stop using QExplicitlySharedDataPointer, makes it possible to inline
the move constructor and assign operator.
Also protect other methods from nullptr d_ptr, and change the default
constructed value to also have a null d_ptr, to match the result after
a move.
Change-Id: I40928feef90cc956ef84d0516a77b0ee0f8986c7
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
In case a text to be layouted contains more than 128 directional characters
it causes the application to crash
The function initScriptAnalysisAndIsolatePairs() collects information of
RTL/LTR chaaracters into vector "isolatePairs". The size of the vector is
capped to 128. Later the function generateDirectionalRuns() iterates
the text again and tries to access items from the previously capped vector
above the upper bound.
Task-number: QTBUG-77819
Change-Id: Ibb7bf12c12b1db22f43ff46236518da3fdeed26a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
(cherry picked from commit 1232205e32)
Reviewed-by: Jukka Jokiniva <jukka.jokiniva@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
According to Windows docs, GetMessage() function retrieves the messages
from the input queue in defined order, where posted messages are
processed ahead of input messages, even if they were posted later.
Therefore, if the application produces a posted event permanently, as
a result of processing that event, user input messages may be blocked
due to hard CPU usage by the application.
It's not a problem, if an internal Qt event loop is running. By calling
sendPostedEvents() on the beginning of processEvents(), we are sending
posted events only once per iteration. However, during execution of
the foreign loop, we should artificially lower the priority of the
WM_QT_SENDPOSTEDEVENTS message in order to enable delivery of other
input messages.
To solve the problem, it is proposed to postpone the
WM_QT_SENDPOSTEDEVENTS message until the message queue becomes empty,
as it works for the internal loop.
Task-number: QTBUG-77464
Change-Id: I8dedb6837c6fc41aa6f497e67ab2352c2b4f3772
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
QColorConstant is a C++11 version of Qt::GlobalColor, except that instead
of Qt::red being an enum, QColorConstants::red is an actual QColor instance,
a bit like in the Qt 3 days.
In addition, the SVG names that QColor understands are also available,
with the same values. Technically, when building a QColor from a color
name, QColor ignores casing and whitespaces; we stick to the SVG/CSS
official color names (which are lowercase), and prefix them with Svg
to clarify where they come from. For instance, note how SVG's gray
is not Qt::gray.
[ChangeLog][QtGui][[QColor] Added QColorConstants, a namespace
containing constexpr QColor instances.
Change-Id: Ic9fab26a9a537fcc43cc230da28f4c6314a32438
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Is pretty common on some architectures so we can avoid swizzling by
supporting it.
Fixes: QTBUG-45671
Change-Id: Ic7a21b5bfb374bf7496fd2b2b1252c2f1ed47705
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Otherwise, we get a warning:
QWARN : tst_NoQtEventLoop::consumeSocketEvents() QWindowsContext::windowsProc: No Qt Window found for event 0x2a3 (WM_MOUSELEAVE), hwnd=0x0x9b80646.
in the event loop which is running by another test. So, add missing
'delete' call.
Change-Id: Ib9b24155bdd6e78062a5234c317c9f878906e413
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The benefit of keeping this code around was to inspire or inform
changes in the areas to take into account possibly missing features
in Qt 5, but at this point that benefit is questionable. We can
always use the history to learn about missing pieces if needed.
Change-Id: I87a02dc451e9027be9b97554427bf8a1c6b2c025
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
That way the image formats with color space supports all have both read
and write support.
Change-Id: Ib52ebd56192c4a8a0897a6afc7c4a26020319270
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Supported style attributes:
<table>
style: supports "border-collapse: collapse" and "border-color".
border: width of the outer border
bordercolor: basic color for all borders
<tr>
style: not supported
<td>/</th>
style: supports the "border", "border-[top|left|bottom|right]]"
shorthand styles and the "border-width", "border-color"
and "border-style" (and the top/left/bottom/right variants)
attributes
<table border=1 style="border-collapse: collapse"> will render
a simple 1px table grid.
Notes:
The QTextDocument table model is much simpler than the HTML table model.
It basically only has <table> and <td> support. So the HTML parser is
forced to map markup and styling to the QTextDocument model which
is not without loss.
In other words: While QTextDocument -> HTML -> QTextDocument should
preserve the QTextDocument structure, HTML -> QTextDocument -> HTML
does not preserve the HTML DOM at all.
So for now the HTML importer and writer only support border styles on
the <td> and <th> nodes. In future updates, the HTML parser might be
enhanced to map <tr> and <table> CSS styles to the cells.
Change-Id: If9e7312fa6cbf270cf8f7b3c72ba1fa094107517
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This patch was generated with tooling from patchset 31 of
https://codereview.qt-project.org/c/qt/qtqa/+/267034 in interactive
mode. General platform names were chosen if greater than 60% of the
currently active platforms of a given type in COIN recently failed.
Change-Id: Ia4bde7f0ec422bbb727dc9d7151295159094f146
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
After comparing colorspaces was remove from QImage equality, the test
was no longer testing what it was supposed to.
Change-Id: Ie7ee8ac2f488ea4254086cbb91a2662dc729e80b
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
