Previously matched Qt.platform.os, however that can only provide one
string. Multiple selectors can be present at once, so we can provide
both unix and linux instead of having to pick the most specialized one.
Task-number: QTBUG-34796
Change-Id: I219517d740fa7385e923a9e09cb7e241378fbaee
Reviewed-by: David Faure <david.faure@kdab.com>
This is used by QML comboboxes, menu buttons, etc.
Task-number: QTBUG-31420
Change-Id: I6d3f32fd80ce91c4be34eae636d1b95a4e251a49
Reviewed-by: BogDan Vatra <bogdan@kde.org>
!build_all is a sufficient condition for bundling headers in both debug
and release configurations, as it means that we will likely make only
one of the builds, and that needs to be self-contained.
Task-number: QTBUG-34575
Change-Id: I1a19e4b619eeff207cfbfd50d3b761053aeaa667
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Up to now, the feature classe Uniform Initialization was subsumed by the
Q_COMPILER_INITIALIZER_LISTS flag together with support for
std::initializer_list.
This caused at least two problems:
1. On QNX, the standard libray does not ship <initializer_list>, even
though the compiler (a GCC 4.6, IIRC) supports it. But since there
was only one Q_COMPILER flag for both, support for the compiler-only
part of the feature had to be disabled, too.
2. MSVC 2013 supports initializer lists, but has a bug that renders full
uniform initialization support, as required for QUuid, useless.
By splitting the feature into two, we can separate them better, and do
so in QUuid, which is the only class that currently takes advantage of
uniform initialization (to provide constexpr constructors).
Since Q_COMPILER_INITIALIZER_LISTS worked as a flag for uniform
initialization so far, with the two known exceptions above,
UNIFORM_INIT is defined whenever INITIALIZER_LIST is, except that
I don't revert UNIFORM_INIT on QNX as I do for INITIALIZER_LISTS
and that I expect the MSVC 2013 features to set INITIALIZER_LIST,
but not UNIFORM_INIT.
Task-number: QTBUG-34705
Change-Id: I81916e950a0f3aab3de7977e0326d2de3d31b14c
Reviewed-by: Yuchen Deng <loaden@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A RESET function is only needed if the default value of the property
cannot be set with the normal setter. This is not the case here, as
clear() is the same as setKeySequence(QKeySequence()).
Change-Id: Ib751677436ebdcec0a7951dceae1e0f0323500ff
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
When EnumForms was used then the dmPaperSize was not always correct for
the custom paper sizes available on some printers. By using
DeviceCapabilities we can be sure that the information is correct in this
respect.
This also fixes respecting of the custom paper size if one is given and
there is no corresponding existing paper size for it.
Task-number: QTBUG-34276
Change-Id: I9924d5be8527027fc434261e37f6c7aae66210c3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
- Replaced all \l instances that were using
the html file name qualifier to link to a \target.
- Updated the linking instructions to not mention
the html file name way to link.
Task-number: QTBUG-32173
Change-Id: Ic3e266e58de7566d533bbc7fbec7ff5c3ec8f231
Reviewed-by: Nico Vertriest <nico.vertriest@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
After b7440536c7, we no longer
restart the input method when the keyboard is shown, even if
the parameters for the input method has changed. The effect
was that if you had opened a keyboard with, say, digits only, then
all keyboards would be digits only forever, regardless of the
settings on text input.
This patch tries to be conservative, so it only adds back the
restartInput() logic when any of parameters have actually
been changed. Tested the code the original patch was made to
fix and it still works as before.
Task-number: QTBUG-34827
Change-Id: Icaee6026d5c3e95b605bb76485acf4fd651f81bd
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Reviewed-by: BogDan Vatra <bogdan@kde.org>
An int is not a proper representation for a QTimeZone, so don't provide
an implicit conversion from it. OTOH, {QByteArray, int, QString, QString}
_does_ nicely represent a QTimeZone, so explicitly state the implicitness
of that constructor so {}-init continues to work in C++11.
Change-Id: I865a6b38b8ab3c577625b7b08efbfc98914abfbe
Reviewed-by: John Layt <jlayt@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The whole QTimeZone class is \since 5.2.
Change-Id: I681b924b534f2f75315b2eaf506aaa7d9590efa1
Reviewed-by: John Layt <jlayt@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This enables specialisations of (std and q) swap using member-swap
and declares the types movable for efficient use in Qt containers,
and QList in particular.
This is a binary-incompatible change, so cannot wait for 5.2.1.
Change-Id: I431315e148b95f82dc3d4471c57ef729539dca9f
Reviewed-by: John Layt <jlayt@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Since the Qt input method queries only give us information
on the position within the block, moving to the same position
in a different block will be interpreted as not moving.
The quick fix is to send a fake position before the real one in
this case.
Task-number: QTBUG-34845
Change-Id: I5d62bdffc283e41d0384c60a0b69c01811caa629
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: BogDan Vatra <bogdan@kde.org>
This is customary for Qt value types these days.
Change-Id: If5374c2595a904337eaef4afc08cdc993229ac25
Reviewed-by: John Layt <jlayt@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Use the same variable in QAndroidPlatformWindow.
Task-number: QTBUG-34764
Change-Id: Idf33707e81cf7306663196f3c17735d8dc1dde5d
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
This will make Qt Quick use consistent timing which
prepares animation frames for the time they go to
screen, rather than the current time at the time of the
animation tick, which can be quite jerky in many situations.
Change-Id: I1bbd4394db0c757553ee406d416fccb3ef937db8
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
as this new cache category comes without side effects, we can
unconditionally create a cache whereever we are. this allows us to be
performant without explicit user action.
Task-number: QTBUG-31340
Change-Id: I6b88b20b61e8351aa8cbf94ad3eec65adac6e1d6
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
unlike .qmake.cache & co., the presence of this file has no magic
effects on where mkspecs, modules and other things are searched.
as the obvious name "cache" is of course already taken, we call it
"stash".
the file is searched up to the super cache (if present), otherwise up to
the normal cache/conf (if present), otherwise up to the root.
if it's not found, it is created next to the super cache (if present),
otherwise next to the cache/conf (if present), otherwise in the current
output directory.
note that the cache really should be created and populated by the
top-level project if there are subprojects: otherwise, if there is an
"anchor" (super/cache/conf), subprojects would race for updating the
cache and make a mess. without an "anchor", each subproject would just
create its own cache, kind of defeating its purpose. this is no
different from the existing "cache", but it's worth mentioning that
removing the "anchoring" function does not remove the "nesting order"
constraint.
Task-number: QTBUG-31340
Change-Id: I786d40cef40d14582a0dd4a9407863001bec4c98
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
otherwise, if the output dir is the root, the path would be denormalized.
the code for finding existing files already does that.
Change-Id: I56d70477e9c9ffcd936325068624a84df10ffd87
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The findFile would need to look though all include
paths the compiler is supporting, which can be very hard
to support for multiply compilers. It is way easier to
use a compile check to catch all include paths the
compiler supports. This fix is needed to find correctly
ICU under QNX.
Task-number: QTBUG-34743
Change-Id: I4f755042a76882b304b058355cf54e37b25df61d
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This is done to autodetect Neon support for QNX.
It might make sense for other platforms as well,
so enable the compile check for all target platforms.
Task-number: QTBUG-34743
Change-Id: I1d149d1942ce0caa288cb56491e4a0ba455dda7d
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Some compile checks may depend on the architecture,
e.g., NEON is only available for ARM, so it makes no
sense to check it for this architecture. Therefore
we need to run the architecture check before we
auto detect settings.
Task-number: QTBUG-34743
Change-Id: I53208d25b0ae0fd93cccc7394307b8ee286576a2
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Disables implicit conversions from QImage to QOpenGLTexture.
Change-Id: I09b4d236dde8eae5258e6a954f4e02b4451990bd
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Disables implicit conversions from Target to QOpenGLTexture.
Change-Id: I2edd2dc4528a311577f0b7df4f6ce22696336a88
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
A move constructor cannot be added because the class uses
a smart pointer to hold its pImpl, so the move ctor would
have to be out-of-line, destroying BC between C++11 and C++98
versions of Qt.
Member-swap is required for Q_DECLARED_SHARED, which in turn
enables efficient use of the class in Qt containers by marking
it movable.
Change-Id: I1aaa5bf3343a92e621d9464d8e4352f4e5ceff1f
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
QWindow::setParent() is documented to imply that the geometry of the
window is in the parent's coordinate system and that the window is
clipped to the parent.
Instead of always enabling clipping of subviews for our UIView subclass
we dynamically detect if we have QWindow children and enable/disable it
on the fly.
Change-Id: If83de94c55cbd19de401ab835e86bb7be5999d71
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
They were handy while debugging the iOS platform plugin, but should not
affect users who link against debug libraries, so let's just remove them.
Change-Id: I61b157e81130e5d951c22892e00f71e593082b1d
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
We don't use separate pools anwyhere else, and this was copied straight
from the UIKit plugin. Unless there's a good reason for having it in this
particular place we should keep things consistent.
Change-Id: I9a3f83bcc5894a2cdfd9af7818b46d6c0f8448da
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
A QWindow may be created() and destroyed() multiple times in the lifetime
of the window, each time resulting in a new platform window (QIOSWindow)
being created. This QIOSWindow is backed by a new UIView each time, hence
it needs a new FBO and renderbuffer-mapping, since the previous
renderbuffer was mapped to the old UIView.
This fixes a bug where a QWindow would not render after a destroy()
unless it was resized (which triggered new FBO/renderbuffers).
We need to inherit QObject so that we can watch the destroyed() signal.
Change-Id: I93172dd6280b86b49755bf7abddf061d7e6b66f1
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
The default UIWindow may not be the only UIWindow around in a multi
screen setup.
Change-Id: Ia7243190321a1416e577634bf5e010dd67d482e6
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
We don't need to cache the device-pixel-ratio, as we can ask the UIView
directly. We do need to set it though, as the default behavior of
matching the screen scale does not apply for EAGL-backed views,
but the ratio needs to match the current screen the view is on.
Change-Id: I29e4a4fa4f4b767d86265ec899fb43a355b5c3a3
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Filter out module QML import paths that point to
nonexistent file system paths.
Change-Id: I897ef50593eeb46c6c9eaec27313ec12e6113cb6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
With 46a8885ae4, we failed when parsing
entities whose partially expanded size was greater than 1024
characters. That was not enough, so now we fully expand all entities.
Amends 46a8885ae4.
Change-Id: Ie80720d7e04d825eb4eebf528140eb94806c02b1
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
All ci nodes are currently missing 3d support, when that is enabled
this test will start to fail.
Task-number: QTQAINFRA-711
Change-Id: Ie6b840e290a9371fa895681e58d6dedf55b777e6
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
This patch does following things:
* Remove the root window: First window which is created will serve as a root window
* Allow creation of more than one application window (with every app window having
an own window group) on one screen
* Fixes a bug when reparanting an EGL window
Change-Id: I1afd64a813bc084c0893b958aa191d4a25c32b9d
Reviewed-by: Matt Hoosier <matt.hoosier@garmin.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
People request this, and other widgets do this, too (say, QSpinBox).
Change-Id: I275537fb82b805b0dcb8edba87b8e234985f8d1f
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
There's a signal keySequenceChanged(QKeySequence), so the setter
should be a slot, too.
Change-Id: I6591bad071444ffa252a2fdb9ccaf28e8629f59c
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Since users were not supposed to use this feature at all, just
live with the BC break, but document it. In order to prevent possible
problems in the future, introduce dummy overrides in QAbstractItemView
and QListView as well. Also, fix the visibility of the overrides
(it's protected, not public).
Task-number: QTBUG-34667
Change-Id: Ib4554ae5e1e7d3ce4ea8e8703e1fea9e2231edb0
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
