... and return them as QStringView from a file-static function so that
the conversion to QString is centralized in just one place (and we can
think of skipping the QString conversion once QXmlStreamWriter can
write QStringViews and not just QStrings).
Because the Style enum is ... weird (negative values), plaster the
code with static_asserts so that we get to detect breakage when the
enum values change.
Change-Id: I4ca89b6c2601c6a1153e202de966356bb4f51651
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
... and return them as QStringView from a file-static function so that
the conversion to QString is centralized in just one place (and we can
think of returning a QStringView in the public API?).
Change-Id: Ie33e2af1b57b8cb34672d245fb9205c68260f440
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The old code stored it in UTF-8 with an encoded BOM.
Using the new QString::op+=(QStringView), we can store
the string, without the BOM, in ten instead of 15 bytes.
Change-Id: Ia1c51da523fcd6298b39bf2ec162a49c7cfdda63
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We end up with an absurd situation:
QSslConfiguration conf;
//we set CA certs so that on demand loading is disabled:
conf.setCaCertificates({...});
QSslSocket s;
s.setSslConfiguration(conf);
Q_ASSERT(conf == s.sslConfiguration); // this assert fails.
Pick-to: 5.15
Change-Id: I272bed145434082acc6ead95fe3640d222b21131
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This function among other things enters a nested event loop twice.
With enough luck processing events may end with posting deferred
delete event for 'q' and then ... executing this event leaving
the whole call tree with a dangling pointer. This is not very
convenient, and we filter out such events to re-post them
a bit later.
Pick-to: 5.15
Fixes: QTBUG-82349
Change-Id: Ic620273b529b89f2bd57e25df1f91c2754940670
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The -dragImage stopped to work in 10.14 first with change in behavior
documented and the new API (AppKit) proposed/advised. Then after
some update the old behavior was restored and D&D for multiple
URLs was working again without us having to change anything.
In 10.15 it's not working anymore and we have to properly fix
it and switch to the API advised. The new API is non-blocking,
but QCocoaDrag::drag is expected to be blocking so we have to
add a nested event loop to emulate the old behavior. Dragging
image is a bit problematic (the exception is thrown because
number of images (1) and number of items in NSPasteboard
are not equal): creating separate images for different
drag items looks really messy. So ... we use the same image
again and again with the same frame.
Fixes: QTBUG-71939
Change-Id: I02c2a10eab280cf4a55513adaf29c22fff934c01
Pick-to: 5.15
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The QCalendar API is, in places, more efficient or expressive than the
QDate facade that accesses it. Make sure those using QDate have a
chance to find it.
Pick-to: 5.15
Change-Id: Iffdddfa1f4884e316a1c9887a8a5053eefa73499
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use it in QString and QCocoaMenuItem.
As a drive-by, s,OS X,\macos,g.
[ChangeLog][QtCore][QStringView] Added toNSString(), toCFString()
on macOS.
Change-Id: Ib05818015a4be11a0d72d4487fb82c580d27854e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
They don't work with std::span, since std::span has neither
const_iterator nor cbegin()/cend().
To fix, perfectly forward the return type with decltype(auto) instead
of mentioning T::const_iterator, and rely on the const-qualfication of
the help::c{r,}{begin,end}() functions' arguments to select the
correct T::{r,}{begin,end}() overload.
Change-Id: I4992d4bd521d2dc0f9ea51ae70cde8286ae543a5
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
We don't need the subclass any more now that we can break ABI.
Merge it back into the "main" style option class, like already
happened during Qt 4->5.
Change-Id: Iba6d3df5f87b0c96f01746260f0a93951dad0e27
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Various format characters are not capitalized in the format string, so
should not be capitalized in the doc that describes them - especially,
the m for minute should not be made to coincide with the M for month.
The H for hours *is* capitalized for ISODate, correctly indicating
that it's on a 24-hour clock, so make that explicit; and correct the
RFC2822Date doc to use HH rather than hh for its hours, likewise.
Reflow to our standard 80-column limit for docs.
Pick-to: 5.15
Change-Id: I357252817d59436de5806f45d40030b873ca3926
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
The message to ignore is given in source code, hence UTF-8; it was
being ingested as local 8-bit, which lead to problems when a debug
message wasn't 7-bit clean and the system's native encoding wasn't
UTF-8. Modified QtTest's selftest to check encoding failure.
Pick-to: 5.15
Change-Id: I898744a450115b6d2ee992f1d3b36d8efaeeff7e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's documented to be undefined if the number of seconds is outside
the allowed range, but it doesn't hurt for that undefined behavior to
happen to be that the result is invalid. Added a simple test.
Change-Id: I20c3f680c7948b3904f213452272133be77e4d62
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
New methods added that can take default arguments to make old methods
redundant, now that we can break binary compatibility.
Change-Id: Iface9d91d4636965285a3ad0c5347fcd7ce5398c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][Important Behavior Changes][QDateTime] Removed all
locale-dependence from QDate, QTime and QDateTime, including the
Qt::DateFormat members that select the formats of the default and
system locales and the toString(Qt::DateFormat, QCalendar) overload,
which only used its calendar for these formats. All toString()
methods now use, and all fromString() methods only recognize, the C
locale's names for days and months. Use QLocale's methods if you need
to take locale into account.
Fixes: QTBUG-80441
Change-Id: I3a8968438741afb00f44262f79659c51e9b06c35
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It clearly belonged in tst_QDate::toDateTime(), for which it adds a
few more test-case and in which it inspires some further testing.
The new testing of case-insensitivity doesn't work if the format
contains stray non-format characters, so added a new data column to
take care of that.
Pick-to: 5.15
Change-Id: I73619be02091c97024a84cb963c7029e9fd0569a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
They use the Qt::TextDate format, so do depend on the feature.
Rename one in the process; nothing in its test has anything to do with
de_DE locale.
Pick-to: 5.15
Change-Id: I2adae5c46e6009c13b433993ed2c3c761a500bfb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Port edgeOrientation() and all its callers from Orientation to
Qt::Orientation.
This function is singled out, since one caller is performing a
conversion from Orientation to Qt::Orientation, which, if left
unchanged, would cause an off-by-one bug.
Change-Id: I37365195ea9552243822803b095a3926a28e7dd0
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
We load an aligned 16-byte on the first load, even if 14 of the 16 bytes
are before the string contents themselves.
Pick-To: 5.15
Change-Id: Ibdc95e9af7bd456a94ecfffd1603f2b8c87655b1
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Except for (void and) bool, which we may not want to have
to avoid accidental implicit conversions.
Drive-by, rearrange qHash overloads to C++ types first,
and then Qt ones.
Change-Id: I9c4ecef5f28568d35ca52e339583851ce53b3bae
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
For Ninja Multi-Config we now generate RC files in a path matching the
current config name.
We have to work around https://gitlab.kitware.com/cmake/cmake/-/issues/20682
to add the generated config-dependent RC files to the target.
But due to https://gitlab.kitware.com/cmake/cmake/-/issues/20683 the
OriginalFilename entry in the generated resource will be wrong for all
configurations but the main one. Cross fingers that this will be fixed
upstream. In the meantime: ignore the issue.
Drive-by changes:
- Fix the function comment.
- Surround the RC file name by double quotes in case there are spaces
in the path.
Fixes: QTBUG-83986
Change-Id: If2fec41fa8050b3feb92c3ce051fde1a5bad0239
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Fixes:
evdevkeyboard/qevdevkeyboardhandler.cpp: In member function ‘void QEvdevKeyboardHandler::switchLed(int, bool)’:
evdevkeyboard/qevdevkeyboardhandler.cpp:153:28: error: ‘struct input_event’ has no member named ‘time’; did you mean ‘type’?
::gettimeofday(&led_ie.time, 0);
^~~~
type
Task-number: QTBUG-84012
Change-Id: I1d127561e0406ae570da656d3e31f9434c7b8798
Pick-to: 5.15
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Fixes:
evdevtouch/qevdevtouchhandler.cpp: In member function ‘void QEvdevTouchScreenData::processInputEvent(input_event*)’:
evdevtouch/qevdevtouchhandler.cpp:579:29: error: ‘struct input_event’ has no member named ‘time’; did you mean ‘type’?
m_timeStamp = data->time.tv_sec + data->time.tv_usec / 1000000.0;
^~~~
type
evdevtouch/qevdevtouchhandler.cpp:579:49: error: ‘struct input_event’ has no member named ‘time’; did you mean ‘type’?
m_timeStamp = data->time.tv_sec + data->time.tv_usec / 1000000.0;
^~~~
type
Task-number: QTBUG-84012
Change-Id: Ib8d726a0baf2bdc85da9341229fffaddc0e373ee
Pick-to: 5.15
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
The native command buffer handle was not updated, so the subsequent
finish() call attempted to record an invalid VkCommandBuffer. The
problem was not present with offscreen frames, only when finish() is
called with a swapchain-based frame active.
Task-number: QTBUG-84066
Change-Id: I9c4cb701c3dbbc28f237d6ae1cbf65aafd1fa95f
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
This part of the patch changes the definitons of the member variables
from 'C arrays of extent 2' to QHVContainer and fixes the code where
ints were used to index into the array.
To not drown in renames, keep the locally-defined enum 'Orientation',
and create a local version of QHVContainer whose index operator is
overloaded for both Qt::Orientation and the local 'Orientation'.
Follow-up patches will remove these, then, completely.
After this patch, NOrientations is no longer used, and consequently
removed.
Change-Id: I2a241520fce4beeb87fc0e26cd6ab18f324a956a
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This reverts commit c9d9ac5bb0.
This breaks prefix build which tries to link to install folder.
Task-number: QTBUG-83967
Change-Id: I084152afde91c2063154bef8ac99d7e997c9394b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It simplifies the API and reduces surprise to have rotation working by default.
On Android, the manifest specifies which orientations the application has
been designed to support; on iOS, it is controlled via the
UISupportedInterfaceOrientations property list key.
In addition, QWindow::contentOrientation() is another way to give
a hint to the window manager, or on iOS to directly control whether
the window's rotation is locked or not.
Task-number: QTBUG-35427
Task-number: QTBUG-38576
Task-number: QTBUG-44569
Task-number: QTBUG-51012
Task-number: QTBUG-83055
Change-Id: Ieed818497f686399db23813269af322bfdd237af
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
When building examples standalone, 'INSTALL_EXAMPLESDIR' may be
undefined.
The converted .pro files now check whether the variable is
set to prevent installation into unexpected locations.
Fixes: QTBUG-81797
Change-Id: I9f97568923c8103011a41d9af7cfe02dd1e40b56
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Aka handle CMAKE_INSTALL_PREFIX in a more relocatable way.
The following story inspired this change.
If a user wants to build a Qt repo into a different install prefix
than the usual Qt one, this will fail configuration because we
look for various things like syncqt, qdoc, etc relative to
CMAKE_INSTALL_PREFIX, which will now point to a different location
where none of the above tools are located.
The intent for such a use case is to support building Qt packages with
Conan, which sets a random install prefix when configuring a repo.
The idea is to derive the qt prefix dynamically from the
QtBuildInternals package location. Essentially it's a reverse relative
path from the QtBuildInternalsConfig.cmake file to the install prefix
that was specified when initially configuring qtbase.
Once the dynamic prefix is computed (so we know where the possibly
relocated Qt is), we can find tools like syncqt and qdoc.
This is an initial attempt to support a use case like that.
More design work will probably needed in case if tools / libs need to
be found in a location different than the Qt install prefix (so
support for multiple install prefixes / search paths).
An example of such a case would be when building qtdeclarative and
qtquickcontrols2 as Conan packages in one go. Most likely the
qmltyperegistrar tool will be located in the random install prefix
set by Conan, so building qtquickcontrols2 might fail due to not
finding the tool in the original Qt install prefix.
As to the implementation details, the change does the following:
- Dynamically computes and sets the
QT_BUILD_INTERNALS_RELOCATABLE_INSTALL_PREFIX variable when
find_package()'ing QtBuildInternals. It's an absolute path
pointing to where the relocated Qt is.
- When building qtbase this variable is not yet available (due
to QtBuildInternalsExtra not existing), in that case we set
the variable to the absolute path of CMAKE_INSTALL_PREFIX
(but only for the initial qtbase configuration).
- Remove QT_BUILD_INTERNALS_ORIGINAL_INSTALL_PREFIX which was used
for standalone tests purposes. It's not needed now that we compute
the location of the Qt prefix dynamically.
- The Unixy qt-cmake and qt-cmake-private shell scripts now
use a relative path to find the toolchain file we created.
- The toolchain file also dynamically computes the location of the Qt
packages, and adds them to CMAKE_PREFIX_PATH.
- A lot of existing CMAKE_INSTALL_PREFIX uses are replaced with
QT_BUILD_INTERNALS_RELOCATABLE_INSTALL_PREFIX. This includes finding
tool locations, mkspecs dir, path environment setup for tools, etc.
- Some places still use CMAKE_PREFIX_PATH in the following cases
- When determining paths while configuring qtbase (valid cases)
- When I wasn't sure what the behavior should be, so I left them
as-is (an example is documentation generation, do we want to
install it into the random Conan prefix, or into the main prefix?
Currently it installs in the random prefix).
Note that relocating a Qt installation does not work for non-prefix /
non-installed builds, due to hardcoded paths to include directories
and libraries in generated FooTargets.cmake files.
Task-number: QTBUG-83999
Change-Id: I87d6558729db93121b1715771034b03ce3295923
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
It was not using QStringView API, but immediately dropped to bare
metal operations (reinterpret_cast, ushort), subjecting itself to
ushort -> char16_t issues.
The new formulation avoids low-level primitives.
Change-Id: I8e75c7ea7409b133ff43bf5c829aa1f8f7503f11
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
- Use QStringView to substring before converting to L1
- cache result of toLatin1()
Pick-to: 5.15
Change-Id: I509f551913e77075e60903ebe65b880bd3f7e973
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Apart from a more fitting, minimal, API, QDuplicateTracker also
transparently uses C++17 pmr::monotonic_buffer_resource to avoid, or
at least reduce, memory allocations.
Change-Id: Ice3ebf1891141d2ac1ec9dd069fb40e98d4056c6
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Both *rc and fillChar have type QChar. So don't use QChar::unicode()
to assign them to each other, just use QChar::op=...
Change-Id: I050035ca16d613f3c57eb5a582978d23c2f04f36
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
That's basically what it is, and we don't want to extent the storage
from one to two bits when porting
QGraphicsAnchorLayoutPrivate::Orientation to Qt::Orientation later on.
Change-Id: I965164141e8d08dbf190e2cd71d9bb7a272b1fda
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
The old code used a static QByteArray, but would write to it on every
invocation of the function. This makes the function non-re-entrant,
even though it's callable from non-GUI-threads (via
QSystemLocale::fallbackUiLocale()).
Fix by using an automatic QByteArray instead.
Change-Id: I93eea1dff1c72f3ea280283bb68b4ed47d2a8e1d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Test the case where reduce function of the form:
V function(T &result, const U &intermediate)
has T and U types different.
Task-number: QTBUG-83802
Change-Id: Ic89396caba16e7e47ae3ec1527e31b8620f1b08c
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Get rid of code repetition in concurrentfilter test.
Move tests with initial value next to their original version.
Join new lambda tests into a common functions
testing all possible 16 combinations of
functor / function / member / lambda, as they
test in fact the same function. There is no need
to distinguish lambda case over other cases.
This helps in test readability and maintenance.
Add missing tests for lambdas with a combination
of initial value.
Task-number: QTBUG-83802
Change-Id: I45930c1e18a9e4e561909f46a5cbbdf0ad7ba333
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Add casts when necessary, and replace a bitwise trick with
the proper function call.
Pick-To: 5.15
Change-Id: I8b3109781af1e7fdc5d1c4c3fafe43394c81d71d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The reference counter could only ever be -1, 0 or 1,
as an autoDeleted QRunnable can only be in a single
thread pool.
This commits keeps the reference counting for now,
but asserts sanity, simplifies locking and fixes a
leak.
Pick-To: 5.15
Fixes: QTBUG-20251
Fixes: QTBUG-65486
Change-Id: I4de44e9a4e3710225971d1eab8f2e332513f75ad
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
If any of the temporary directories and files can't be created, skip the
test. Otherwise, the cleanup routine would recursively delete "/".
Change-Id: I51f908a468be8fd2ebd523ff7ce27a7c78d1b4e2
Fixes: QTBUG-83863
Pick-to: 5.15
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The system APIs expect an absolute "display name" of the file path,
so make it absolute.
The test was overly tolerant in accepting failure, as a QStorageInfo
initialized with a file path that doesn't exist is invalid, and thus
always different from the QStorageInfo of the home directory. Fix the
test to compare only valid QStorageInfo objects, and postpone the check
until the file we want to move has been created.
[ChangeLog][QtCore][QFile] moveToTrash supports relative file paths
on Windows
Change-Id: I94c8cd40c60fde469e38f76a98f867f20c6a0b15
Fixes: QTBUG-84015
Pick-to: 5.15
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Change-Id: Idb11bd2058f2ec3f258845aea0d314430ff7c578
Reviewed-by: Simon Hausmann <hausmann@gmail.com>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Those library types typically do not have Windows resources with
version information.
Change-Id: I1a385c2ae4e40d5c153ac6501c5ed826eaf75655
Reviewed-by: Simon Hausmann <hausmann@gmail.com>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
