Allows the macx-xcode mkspec to be a wrapper around other mkspecs.
Since QMAKESPEC can now be set in the spec, we have to ensure not
to append to QMAKESPEC.
Change-Id: Idf33ff38147f14c488f14b426c02d9a739fdaecf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The Xcode generator does not support exclusive builds, but still
generates projects that contain both debug and release configurations,
each with hard-coded differences such as whether or not to strip or
to generate debug symbols.
As a stop-gap solution we allow projects and mkspecs to add extra
settings that are limited to a given build. Long term we want to
rewrite the Xcode generator to support exclusive builds, but that
is a much bigger task.
Change-Id: I85056164bb1b3c8c6e0cf66410348cca7138eca5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Shared between UNIX and Win generators, and allows prfs after
default_post to rely on sane TARGET and DESTDIR values.
This allows us to clean up the DESTDIR logic in testcase.prf,
which was completely busted. Doing the two in separate commits
is unfortunately not possible as the old testcase.prf logic
was so broken it would barf if only looked at.
Change-Id: Ibf21216195c760ee46ae679c162b207b77a9d813
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Exclusive builds uses setExtraConfigs to apply the particular CONFIG
of each build pass. Unfortunately we were not applying these extra
configs early enough in QMakeEvaluator::visitProFile() for them to
be picked up/usable by default_pre, something that can be useful.
Change-Id: I423a4688250a15f0c1a2cc65a48f0bbc14ad4497
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The extra variables only need to be applied once, when we
are loading the pro file (and hence are loding pre files),
not for every single pri/prf that's loaded as a result of that
(which do not load pre files themselves).
Change-Id: I3118694a8eeccf2dc32c4f62df754033fad13528
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
It has no effect when the compiler doesn't support it.
Task-number: QTBUG-33952
Change-Id: I23b1fcdf4ec31924b1b59987846f7e0fbf17c6c9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Allows us to have scoped variables such as eg FOO[arch=armv7].
We could quote all variables, but Xcode doesn't, and we try to stay
close to the native behavior.
Change-Id: Ia6634a33e42031fe7e69c4f680803fa347e5de4a
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
ARGS already exists, but is a flattened list of the arguments, so both
foo(bar, baz) and foo(bar baz) will give count(ARGS, 2), making it
unreliable for validating arguments to qmake functions.
Change-Id: I0bcc16614c64000169431327da48fd1a26708e67
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
A bunch of empty and never-to-be-used directories makes the build tree
noisy and harder to navigate.
Change-Id: Iebef91c82d58a8d6a0047fb5439d50eb6806f557
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
There was a mismatch of how we sanitized paths for dependencies of the
target and how those dependencies were sanitized (or not sanitized),
resulting in the target depending on 'some/path/foo.o' while the
extra compiler target was named 'some/path//foo.o', with an extra
slash. This confused 'make' enough to decide that it didn't know
how to build the dependencies for the target.
Change-Id: I181b86c291286cbbbb1f7b4c3b929a5f1dc163a3
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The pattern ${QMAKE_ needs to be at the beginning of the line, or not
start with a $ (which would make it a regular qmake variable).
Also, it's fine that the variable is of the QMAKE_VAR_foo type, as
these variables are resolved at generator time, but are constant
and do not depend on the inputs. This means we have to replace
extra variables in the output.
Change-Id: I21ad24ae770f2137e2d5d92a20ee54e2f3f4ca06
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Platform specific qmakespec needs to enable: autogen_wmappmanifest and winphone. Manifest will be generated once and only for the application template.
The Manifest will generated from following variables:
* PRODUCTID - the GUID (application specific)
* PUBLISHERID - GUID (publisher specific)
* TARGET - short application name (executable)
* AUTHOR
* PUBLISHER
* DESCRIPTION - application description
Change-Id: I225c24dc256c57451775e37658080e88b842a7d8
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The user needs to specify the DEPLOYMENT variable. The syntax
is the same as previously used for DEPLOYMENT. For more info
please refer to the qmake documentation. The change adds
a new itemgroup, "Deployment Files". All files in this
itemgroup are marked as DeploymentContent and are then
packaged with the application either as XAP or the WinRT
specific file format.
Change-Id: Icf85887287c1c97eb782704340eaa3f8dde6719e
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
In order to be able to use the linker's /WINMD
and /WINMDFILE options
Change-Id: I2673e20aa073c6b807e8c9f191fd408c7976efc4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The change adds a new ItemGroup with a single library reference:
platform.winmd.
Change-Id: I0c7f4c46654b520afb79b6c6f49b5f2d1af400d3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
It's a generic way to configure the Visual Studio Solution
architecture. It's added to support different project
architectures, ARM specifically. It may be a good idea
to replace the Win32 and x64 with VCPROJ_ARCH=Win32
and VCPROJ_ARCH=x64 defined in corresponding qmakespecs.
Change-Id: I9b23f7393bf248a629c425187d6dd8859092c45c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
qmakespec for either WinRT or WinPhone have to specify
QMAKE_PLATFORM with winrt and/or winphone.
Change-Id: I87e0063881e6edd65de14adb006949247ce49904
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The Xcode generator relies on the generic makefile generator for extra
compilers such as qrc and moc, by generating makefiles that are then
executed as separate build steps in the Xcode build.
These makefiles are generated by entering a special mode in the Xcode
generator, in which case we _do_ want to resolve dependencies, so that
e.g. the files referenced inside a qrc file are added as dependencies
to the makefile rule that generates the qrc-cpp file.
Change-Id: I96bdcb165e9774a6328ae1980986fa2c6b00c6d9
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
qmake manual needs to be able to link to pages in qtdoc module,
for example, to information about Third Party Libraries.
Change-Id: I6ccaa0c3aecc54bd5d76c6b1573c797423048207
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
When building a project in VS then it would cause a rebuild
under certain situations even though a rebuild is not
actually required.
The root problem exists in VS in the following configuration:
1. A file has a custom build tool specified
2. The custom build tool has additional dependencies
3. The input file is specified in the additional dependencies
4. There are files in the additional dependency list
This is the situation with form files in Qt that have include hints
specified in Qt Designer. The include hints get specified in the
additional dependencies for the custom build tool.
What happens is that VS will process files in the additional
dependency list differently based on where they appear in the list
relative to the input file.
If a dependency appears before the input file, VS will require the
file as a build input. If you just specify a file name, VS looks in
the project directory (and only the project directory) for that file.
You have to specify the path (relative or absolute) to get VS to look
elsewhere. If VS does not find the dependency, VS thinks the project
is out of date (since the missing dependency is a required build
input) and will rebuild the input file.
If the dependency appears after the input file and the file doesn't
exist, VS does not include the dependency as a build input. Since the
file is not a build input, no rebuild is required.
Change-Id: I5af460d21ad049ed7819746fd60c98677b810692
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
as a side effect, this fixes the generators that were more bitrotted
(nmake and even more mingw).
Task-number: QTBUG-30644 #close
Change-Id: Iefa3f07125884412d091aa12b44935e5b1fb858a
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
sync up; this doesn't actually do anything in qmake.
if we end up calling cache() from within the initialization of the base
context, we cannot wait for for the completion of that initialization
before we proceed, obviously.
Change-Id: If30c6f3665fe423e767373a8821c406b2f5e0eca
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
(cherry picked from qtcreator/b64b4431c20afd9e39c1463e736f998ef450688f)
sync up; this doesn't actually do anything in qmake.
as we modify the environment, it must be properly locked.
this implies that initFrom() also needs to be called with a lock.
Task-number: QTCREATORBUG-9835
Change-Id: I48bae9af9adaa0518e5a9db0ba08ff057ae14f9f
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
(cherry picked from qtcreator/d022a2d19cecb00397c2a215fc4e3bf64b1e627b)
sync up; this doesn't actually do anything in qmake.
creator's file watcher can trigger many parallel, entirely
non-hierarchical project reloads. if there is enough of them to exceed
the thread pool size, some will be serialized already by qtconcurrent,
not by our wait condition. these should notice a faulty spec, too.
Change-Id: I8ce40cb90fbc28045127881d57ec94e125df79af
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
(cherry picked from qtcreator/759d0a69dd3973b4785b6f9412f46666a05cdf85)
You can specify a relative path to a .pro file in any directory.
Fixed a capitalization issue and a grammar issue and changed the
visible text in a link target.
Task-number: QTBUG-14139
Change-Id: Ib476bd400c46645709950c582492edcaaba9d7ed
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
That's not been in use for quite a while.
Change-Id: If5a18a54d32f330fe37655516d4b83e5d3d30afc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
use the new parser flags to report all i/o errors directly.
as a notable side effect, the "WARNING" prefix is gone (even though
it is still treated like that, which is mildly insane to start with).
Change-Id: I084375d5e7a3314ae763795f7c318804a9fb84b6
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this doesn't actually do anything in qmake.
Change-Id: I908fc3792bdc321370e51be98adf7a9c81e37a85
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
(cherry picked from qttools/e1f3732197ef77a29cb7f3c1ce094b3f31a7b689)
(cherry picked from qttools/226f013441990aa4a58f7c82e284057cff659959)
We just need one digest algorithm, any algorithm, to generate a
somewhat unique identifier. SHA-1 will suffice.
Change-Id: I3cb26bf866d616df3ef32feace10934f19daa1a6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Set the SONAME to the library name without the major
version number appended, as android does not have the versioned
symlinks.
Change-Id: I41c504869019a393a3f112b2f7fc81c7ad5afa1c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: BogDan Vatra <bogdan@kde.org>
-corrected qmake.qdocconf file to not read the manual twice
-moved the snippets and images directories to make sure they are not
in the src directory
Task-number: QTBUG-32580
Change-Id: I7b702ce3b1c8709bbb1f473f70625083242f1a40
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
Add the depends variable with all modules as values,
because the QT variable value documentation should list
the import statements for all modules.
This patch enables linking to other modules.
Change-Id: I521ac22bac27d79537c14583f6592251288974a4
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Qt Windows Extras is a new add-on for Qt 5.2.
To make the link work, also added qtwinextras to the
doc configuration file.
Change-Id: Ib7d117908c241812c200ec701b6f2be27fe893c6
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
sync up with qt creator - for qmake itself, this is just a minor
refactoring.
Change-Id: I833253f81c3159056fab2ff888f293b36cc2ef56
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
(cherry picked from qtcreator/66802ef8bf7989dc025e34bf91d93576189c483c)
(cherry picked from qtcreator/69542826fa643a0fed2fc9e717f072c2852dc017)
(cherry picked from qtcreator/196424115338fb9a535810704b7d814d318b0462)
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
In the Help mode in Qt Creator, many have accustomed to search e.g.
for 'qmake variable reference' which no longer exists as a title in
the qmake documentation.
This change provides easier access to the qmake reference by
creating keywords for them, making them appear in search results
for searches starting with 'qmake'.
Task-number: QTBUG-32268
Change-Id: If60a0cdc11464a8aeb50c62ddbde9683326e1384
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
... as that causes debug+release installs to overwrite each other's
postprocessed files.
introduces CONFIG+=sliced_bundle, which instructs qmake to create
file-by-file install commands. we don't know whether people are not
putting files outside qmake's knowledge into the bundle build dir, so
this mode is not necessarily backwards-compatible, and thus off by
default.
Task-number: QTBUG-28336
Change-Id: I23e90985ccd3311f0237ed61aadca6d7ed8325b7
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
by convention, $target.framework/$target links to
Versions/Current/$target, not Versions/$version/$target.
Versions/Current already links to $version.
so this adds one indirection, but is otherwise the same.
Change-Id: If3d1a3713712f4221ec31883977e50bce6f91764
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this went unnoticed so far, because the mac qmakespecs don't define a
strip command to start with.
Change-Id: Iac3e7ffa6f400373552134a44b9713aaf5f44589
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
replace() doesn't detach if there is nothing to do.
Change-Id: I845b585c766f44a670ca3af1fc11ba03e7317622
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
qmake has the rather bizarre logic that QMAKE_LIBS* is escaped rather
early (instead of right before being written out the the Makefile).
consequently, we need to explicitly escape the paths from the prl files
as well.
Task-number: QTBUG-32326
Change-Id: Ieaf81113d3ca3cf5d8a1ef87c83c5721d6b473ee
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
escape backslashes before the quotes, as otherwise we'd escape the
backslashes we just used to escape the quotes.
Change-Id: I88e12c0c2cfc53e0ab8dce9807b06dfce6aa6e78
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
... as that is the CWD of the command (since b139e7e96e5c).
leave the resolution relative to $$PWD as a fallback with a warning.
Investigated-by: Harald Hvaal <hhvaal@cisco.com>
Task-number: QTBUG-19352
Change-Id: I75de9444a647cd9e6f509e3d8eb3382dc985e5ca
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Scripts are available in internal mkdist repo.
Added license tags, updated licenses and copyrights/contacts
Change-Id: Ibc734275f3000987eaa4f5c57f19d4e1fda2c479
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
it's not necessary to immediately re-calculate the roots after assigning
QMAKE_PLATFORM - it's sufficient to do it on-demand, so merely
invalidate them. this avoids that we re-calculate them multiple times
without ever using them in between while processing specs with
distributed platform assignments.
Change-Id: If508594764811b96a577fc81c5ded34ab0453148
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
(cherry picked from qtcreator/28df27d924bb407791a76de8159c9ffa6efde283)
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
looking up the same files in the same locations over and over again
is a rather significant waste. in particular, looking up the CONFIG
flags that don't correspond with features has a measurable impact on qt
creator's project loading time.
Task-number: QTCREATORBUG-9154
Change-Id: Ibae3d8b7797e706a6416a7d45c77734ab1281b51
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
(cherry picked from qtcreator/fa27cd79e05aed4ebd16d5648480cc7d48fefd43)
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
just directly use the filename we constructed it from.
Change-Id: Ia428a2cb4b192fea6bde62dfbf35361bcfc4b21e
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
(cherry picked from qtcreator/571234786a3ff7e8e3a9220f12d22a9f74f7a53c)
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
When defining QMAKE_LFLAGS += /MANIFEST:NO to pro file,
it is not written to vcproj in VS2008.
Added MANIFEST:NO generation to vcproj
Task-number: QTBUG-31975
Change-Id: I5f84b30db711bf9c317ca20dc65b207140edb398
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
makes for less visual noise and a tiny bit more efficient code.
Change-Id: I587707fa4e2dc9bead9435bf5caf3a98ab680725
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Add mkspec win32-msvc2013 and make VS 2013 known to configure and
qmake.
Change-Id: I6e63a4d679727a8a3f068f377956185996d72bce
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
contrary to what one may expect, it's actually *not* supposed to remove
the meta-characters it interprets.
luckily, this function is not used much any more ...
Task-number: QTBUG-31877
Change-Id: I2b60f9b173140da78db2b07b596cc2e5f6e6d555
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
We were only fixing QMAKE_C/CXXFLAGS, not the defines we then appended.
Change-Id: Iaa4a394738658c45aae83941ebe54470d6d8e250
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
If both the rc_file and res_file was added to the project then in MSVC
2012 it would cause an error complaining of a duplicated resource.
Task-number: QTBUG-29826
Change-Id: Ib3401b423208cd8c90895038c9cbadd80c39b542
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The removal of embed_manifest_dll or embed_manifest_exe from CONFIG
now disables the embedding of manifests in VS project files.
Task-number: QTBUG-5301
Change-Id: I031318883edca6f9b63a7981ef6c44e3f123f6fd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The POSIX function uname() can return any non-negative value for success.
- Example: Solaris 10 returns 1 on success.
See: http://pubs.opengroup.org/onlinepubs/009695399/functions/uname.html
Change-Id: Ic3d51f94a31d8b562b28a2d09df3d31b04c77dc8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
For vcproj files we should not automatically add a dependency for extra
compilers as this should be done via the depends variable for the extra
compiler instead.
This fixes a problem where something like '@echo command' was used in the
command as it would depend on echo and not the actual command anyway.
Change-Id: I7c0aa0d62143aa39c518e8bce65f302afdba33c9
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
as of qttools/18a5e89623815f5355b4173a2e93609eb10289d1
Change-Id: I75cb55e0c404449a4e0d963e09185287a3f6343e
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
this avoids that an empty rebuild after a complete build re-runs qmake
everywhere again.
according to 1f83f0cf2a this is the behavior i originally intended,
but somehow it got lost when switching to the new interpreter.
Change-Id: Id5158d7e272fdee4f4a041fb7c828295a0a86684
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
instead, teach qmake to use the mkspecs dir from the source dir as well.
Change-Id: I9edac11f8997fcb0594d0a67419d4733dd4ed86b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this is for shadow builds during build time, where the respective files
are expected in the source dir.
Change-Id: I18dcfbdef99e1562a51dacac333642cae8105ebd
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
these files function as "anchors" for mkspecs/ and features/ directories
used by projects which load these files. ironically, these files didn't
see these feature files themselves.
Change-Id: I590855eb4a9d2c72b9abfcaa431d2f85a719c6e2
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
we were finding features/ directly in the source & build root, and we
were finding features/ under mkspecs/ from $QMAKEPATH and other mkspecs
locations, but we omitted the "transitive hull". this was
counterintuitive.
Change-Id: I9823e6606467c98f264c81385250da92311f51ca
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
sync up implementation with qtcreator.
Change-Id: I6a1578818512fa3b0773faf276a1d56881eb06d7
(cherry picked from qttools/582cbddc6ba1b74a7e4e07e0b5c23d47de6838cb)
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
sync up implementation with lupdate & creator. no actual effect on
qmake.
don't filter out ^QMAKE_.*:
- QMAKE_MKSPECS is not printed any more, so needs no filtering
- QMAKE_VERSION can be simply used now, as we are now rather close to the
real qmake
- QMAKE_SPEC and QMAKE_XSPEC need to be fetched
- this fixes the default spec resolution
Change-Id: Ifcfa8b5b9e2bbf5d995940e1bb7f55e7d67aed3e
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
(cherry picked from qttools/0037bef09ca77c5ae4d20bd09294ba1d57537e09)
sync up implementation with lupdate & creator. no actual effect on
qmake.
Change-Id: I1bdeb759e895e4200f09332dadf8a6cef348182f
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
(cherry picked from qttools/94ab2efb2d155d3c1ca7b91c1daf443a149bcf1f)
This reverts an earlier change that tried to fix the relationship between
Qt's concept of output directories with what Xcode expects, but it broke
DESTDIR. The relationship between Qt and Xcode is still a mess, but at
least DESTDIR now works.
Change-Id: I44f056d48c87359a609e0337da266120ba4eb155
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
the logic in the configures was even trying to express that, only that
nowadays we always ship syncqt, so the tests were kinda pointless.
this frees us from the perl dependency for non-developer builds of
packaged modules (except for webkit, which needs almost every scripting
language on earth anyway).
obviously, this requires that the packaging scripts run syncqt in the
source dir before tarring up the sources. note that for repositories
other than qtbase, the -version argument needs to be passed to syncqt.
Task-number: QTBUG-29465
Change-Id: Ic929ab17a5de4b30fbf48b3aa9bfa3b4d2ef37d6
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The PlatformToolSet tag belongs into the PropertyGroup with the label
"Configuration". The former location in an anonymous PropertyGroup
tricked Visual Studio into displaying the right PlatformToolSet but
using its default value. If VS 2010 and VS 2012 are freshly installed
on the same machine, the default toolset for VS 2012 is VS 2010.
Task-number: QTBUG-30822
Change-Id: If00a532e92b0812c552b1cac52ff77a1e7039146
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this was forgotten when the value lists were extended by a size hint.
Change-Id: I6f9b55ed671224a9b8735c8d937f94aac4a73a42
Reviewed-by: Daniel Teske <daniel.teske@nokia.com>
(cherry picked from qtcreator/f24c9865306624c2fc150d4bd262a5c4d5a3689a)
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Warnings came up using MinGW 4.4:
* qmakebuiltins.cpp: 'QString windowsErrorCode()' defined but not used
[...]
Change-Id: I80827f7f740ff380f13cef96d6b43baaa7e179cb
(cherry picked from qtcreator/0e13cf3faffc7463ae2bf535dfdb008202112cc4)
Reviewed-by: Orgad Shaneh <orgads@gmail.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Some projects set TARGET or DESTDIR only in the build_pass
Task-number: QTCREATORBUG-4273
Change-Id: I3673dd93b37b10102a0c1f1ce053e1aef8aaf53f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
(cherry picked from qtcreator/95169eb8e39c6f43b7e74fbb18d4db19a38b0124)
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
... and introduce -hostlibdir configure option for symmetry.
the libraries built for the host have no business in the target prefix.
in principle this code would even support dynamically linked host
libraries, but that's currently unused.
Task-number: QTBUG-30591
Change-Id: I8e600fa4911a020fb0e87fbf7ef2f35647c7c4d5
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Ivan Romanov <drizt@land.ru>
Fix C4267 MSVC warning.
Make sepSize an int, because this function is never called with a size_t.
Change-Id: I2b834fe7c1408e34d55d9f137231e2f5816f3f1d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
/RTCsu and /RTCus must be handled as full runtime check options.
Task-number: QTBUG-30711
Change-Id: I783bf49f2ab1d4fd9636dca8e434bccb54844c8c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The vcxproj format supports the /we compiler switch as
TreatSpecificWarningsAsErrors tag.
Support for this switch got lost during refactoring of the
vc(x)proj generators for Qt 4.8.0.
Task-number: QTBUG-29098
Change-Id: I607e907dcb9c1bc7d261053b6d757941ec7db822
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Fix passing of preprocessor definitions with double quotes to the
resource compiler and to MIDL. Both have a different escaping mechanism
then the C/C++ compiler tool. This fixes a regression introduced in
9e9911715c.
Task-number: QTBUG-30859
Change-Id: Ifa041df407030320847373a5964a547c39dd5439
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
and consequently that it finds qt.conf.
Task-number: QTBUG-30583
Change-Id: I48441477e941d9609270d6e5e1b405127c0c0aca
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
These timestamps were useless and broken on non-ascii locales.
Change-Id: Iad08eb0f5dfd5e86f6451d6572365d0c080e6115
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
On iOS the compiler expects archs like armv6, armv7, armv7s when passed the
-arch flag, or when the ARCHS Xcode variable is set. Instead of mangling
QT_ARCH, which is used other places and assumed to match the values
provided by the arch.test, we use our own variable.
Change-Id: I05e10be8d69dd4d7cbcef04640fef99f1efb253d
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Both the /NXCOMPAT and /DYNAMICBASE options were handled by qmake but
never written to the vcxproj file even if they were set in the pro file.
Change-Id: I4ca26fb312648944c25d3a24cdc8c640c9de619d
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
If mingw32-make.exe encounters a backslash as the last character
on a line it interprets this as signifying line continuation.
When building Android Qt on Windows via cmd.exe, this happens
as backslashes are used on Windows as directory separators.
The workarounds are to make sure that a comment appears directly
after the definition of DESTDIR and that a space ends such
$(MOVE) command lines.
Change-Id: I7f93b655e004edaadac41d0d96bca23e1ba3a85c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
In ebc4fb45 all NDEBUG defines were removed from DEFINES to adjust the
nmake generator's behavior to the vcproj generator.
Turns out that the vcproj generator did it wrong.
The user must be able to specify NDEBUG in DEFINES.
Change-Id: Iaaf3915ac79acbbd1e7a3172ad3951d0d686041b
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Split $(MOVE) commands up into one per file so that cmd.exe's
builtin move command can be used.
Change-Id: Ife8d7449a2d7718a67082e2d78954964033ce07d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The undocumented feature of linking the library with the highest
version number is more confusing than helpful.
We're changing the default from on to off now.
Users who still need this feature can turn it on with:
CONFIG += link_highest_lib_version
Task-number: QTBUG-15596
Change-Id: Ic998c1685003caa6f57e27dccf83c8b4a2a09553
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This makes it possible to properly parametrize alternative compilers.
Change-Id: Iaf0961c47875ee16d815356f36acf5652577cdca
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Remove all trailing whitespace from the following list of files:
*.cpp *.h *.conf *.qdoc *.pro *.pri *.mm *.rc *.pl *.qps *.xpm *.txt *README
excluding 3rdparty, test-data and auto generated code.
Note A): the only non 3rdparty c++-files that still
have trailing whitespace after this change are:
* src/corelib/codecs/cp949codetbl_p.h
* src/corelib/codecs/qjpunicode.cpp
* src/corelib/codecs/qbig5codec.cpp
* src/corelib/xml/qxmlstream_p.h
* src/tools/qdoc/qmlparser/qqmljsgrammar.cpp
* src/tools/uic/ui4.cpp
* tests/auto/other/qtokenautomaton/tokenizers/*
* tests/benchmarks/corelib/tools/qstring/data.cpp
* util/lexgen/tokenizer.cpp
Note B): in about 30 files some overlapping 'leading tab' and
'TAB character in non-leading whitespace' issues have been fixed
to make the sanity bot happy. Plus some general ws-fixes here
and there as asked for during review.
Change-Id: Ia713113c34d82442d6ce4d93d8b1cf545075d11d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
in the case of sprintf it's surprising, in the case of join it's
anti-thetical.
Change-Id: I4eb7e56d31ac6ed68adf852f1a19b33554d38eb4
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
depend_prl would so far only ensure that the dependency existed, not
that it would be up to date. this is of only limited value, so make sure
that the dependencies are always updated.
as this is somewhat expensive (every dependency's makefile will be
entered as many times as it is used, plus one), provide an opt-out by
adding fast_depend_prl.
Task-number: QTBUG-29486
Change-Id: Ifa2e100bc4c269a403ab620927bfe5c7efe9a435
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
unlike before, the output dir is now important already during the project
evaluation phase, as finding .qmake.conf depends on it if .qmake.cache is
also present.
ChangeLog: fixed qmake -tp vc (and configure without -no-vcproj)
Change-Id: Ifdb95f3b38a70c0d08e71238059292e761dcfa53
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
unlike unix' mkdir -p, windows' md complains if the directory already
exists. the workaround is a quite complex command, so the so far used
concept for assembling the command line from pieces was replaced with a
single template. for symmetry, adapt the makefile existence check to the
new concept as well.
QMAKE_CHK_EXISTS and QMAKE_MKDIR_CMD were added, with hard-coded
fallbacks (ugly).
QMAKE_CHK_FILE_EXISTS and QMAKE_CHK_EXISTS_GLUE (introduced in 5.0.0)
are simply deleted again.
QMAKE_CHK_DIR_EXISTS and QMAKE_MKDIR remain for legacy reasons, as qmake
emits them into the Makefiles, and custom commands may rely on their
presence.
Task-number: QTBUG-28132
Change-Id: I3d049cb5d26947e5c3d102d0c2da33afb2a95140
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Janne Anttila <janne.anttila@digia.com>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
