... before trying to update the configurations. Before, we would check
whether the pointer to the QNetworkConfigurationManagerPrivate instance
was 0 and in that case construct it. This would mean that this code path
was taken "at app shutdown", i.e. when the qAddPostRoutine had already
been called but the other statics were still accessed.
Note: This is not thread safe, but neither is the rest of the code;
making it thread-safe would require additional changes.
Task-number: QTBUG-30585
Change-Id: I8f6cf616e3f3ba1e84b8246589fb7210d2dae57a
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
These macros are useless from Qt 5.1 on.
Change-Id: I4574e87ef36e7bc67d2f1caa38c685a837708764
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The correct CFLAGS are already present in gcc-base.conf, which is
used as a basis for g++, LLVM, and Clang.
Change-Id: Ic19e28edc55e109ecfe372826b295b817afcd36e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Before it would skip out a row depending on the size of the tableview.
Now it will show the next set of cells for the direction it is going in.
Change-Id: I02926d0b2187ffafffb63f7fff43c233b4d7d6af
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The name field string was not set in native dialog when one was present.
The previous fix is not correct. In the doc of setNameFieldStringValue,
it said "The value must not be nil".
Task-number: QTBUG-28342
Change-Id: I847fb7472b8fecc0303433d8bf72b6a5bd7da72b
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Initial window position is at 0,0 by default, then it's corrected
in createNSWindow (by calling initialGeometry). After window
creation, QNSWindowDelegate will receive the windowDidMove
notification and call QCocoaWindow::windowDidMove() which then
calls QNSView::updateGeometry(). It will not call
QWindowSystemInterface::handleGeometryChange() because the window
is still being constructed. So we can fix this by directly
setting QWindow::geometry in the QCocoaWindow constructor.
Task-number: QTBUG-30382
Change-Id: I3db7a6e83693e5787ae82dcab1767de938d2e5d1
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
In ebc4fb45 all NDEBUG defines were removed from DEFINES to adjust the
nmake generator's behavior to the vcproj generator.
Turns out that the vcproj generator did it wrong.
The user must be able to specify NDEBUG in DEFINES.
Change-Id: Iaaf3915ac79acbbd1e7a3172ad3951d0d686041b
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Changing "C++ API" -> "C++ Classes" to match all the other modules.
Change-Id: I434cd9c32b1db18395242e73564fe309c8ebb99e
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
This completes the change started with
0bdc86d9ef by providing the implementation
for the Oracle and DB2 sqldrivers
Change-Id: Ia14415c6d7dea51f1369a81236f79aff892b3af7
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
We depend on Xcode for building Qt itself and user application on Mac OS.
The user may have an Xcode install that is not set up properly, in which
case we would fail compilation in mysterious ways. Instead we try to
detect misconfigured or missing Xcode installs as early as possible.
We try to detect if an Xcode install has not been chosen yet, and
if the user has not accepted the Xcode license agreement. We need to
do these checks both in configure, as early as possible, and in mkspecs
on Mac OS, as we need to error out if the user tries to build an app
with the Qt SDK, but with a broken Xcode install.
Change-Id: I4e3a11077a61dc5d4ee2c686d01044a9bb2c1c79
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We always use the xcodebuild/xcrun/xcode-select binaries in /usr/bin,
as these will dispatch to the right binary based on what Xcode version
has been chosen using xcode-select -switch. This fixes an issue where
a tool was in the path from another Xcode installation. We can rely on
the tools as they are present on a clean Mac OS install.
Change-Id: I1d3cc1e92604f9be6d6f14639cb6322234edd696
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
QDoc needs correct capitalization to create a link to the class ref
Change-Id: If95ab1245fcad6c0f624b88eb4522ba78be7d6a6
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
We seem to have two tables. That's a bad idea, but they are there.
I won't add Qt 5.1 until we're certain that the datastream isn't
changing. It's preferable to lack information than to show the wrong
value.
Change-Id: Ibc7eb95bbbf3b35388f910154372fdd896735430
Reviewed-by: Martin Smith <martin.smith@digia.com>
xcrun will spit out errors to stderr and nothing to stdout if it fails
to find the tool in question. By checking for an empty return value and
skipping the sysrooting we guard against mangling the tool variable.
Change-Id: I68f59a6c8116696dd75cceed7b33ac666f3468b2
Reviewed-by: Eike Ziller <eike.ziller@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The documentation used to have "Main Classes" list for C++ classes,
and qdoc kept track which classes were supposed to be listed as "main"
classes. This is no longer used, so this change removes the code that
marked a C++ class as a main class and tested whether a class was a
main class. This dead code was seen while preparing the way for
changing qdoc to output a documentation page for obsolete C++ classes
and functions and obsolete QML types and functions.
Task-number: QTBUG-30511
Change-Id: Iccc31b46b7c3c144038372cad4771d974f207937
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Split $(MOVE) commands up into one per file so that cmd.exe's
builtin move command can be used.
Change-Id: Ife8d7449a2d7718a67082e2d78954964033ce07d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Also, get rid of qt_mac_toCGImage and QPainter warnings.
Change-Id: I9e2a0e93d74c318d99651de9222994615e082ac9
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
These are the same for normal builds, but differ when cross-compiling Qt.
Change-Id: I75eccc6f4b67b440a08c4aba41aabb7df686c9f9
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
By calling itemData() of the source model directly, the result cannot
contain data provided by the proxy model itself. The base class
implementation however will call data() on the proxy instead.
Change-Id: Ib0ef5f5621457adbfa4bd896a756dfcb98d0ae54
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
With data=0, ANGLE can crash when setting the buffer data. As this
should be a legal operation, don't perform a memcpy when data is null.
Change-Id: I3fa1260482549b1da50d7a68001a65decb98f258
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
This allows the Direct3D 11 version of ANGLE to gracefully allow
surfaces with dimensions of 0. This is important because Qt may resize
the surface to 0x0 because of window minimization or other user
action (window resize). As EGL specifies that empty (0x0) surfaces are
valid, this makes sure an assert doesn't occur in the case that a valid
surface is resized to an empty one.
Change-Id: Ia60c4c694090d03c1da7f43c56e90b925c8eab6d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Upgrades ANGLE to dx11proto (dx11-MRT-support tag), which splits out support
for DirectX9 & DirectX11. The DX9 codepath is used by default;
CONFIG+=angle_d3d11 must be passed to the ANGLE project to build for DX11.
Existing patches to ANGLE have been updated (or removed if no longer
needed), and a patch has been added to make DX9/DX11 codepaths mutually
exclusive.
Change-Id: Ibe13befadb94f04883eca449d0ee1f0da955ff92
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Axel Waggershauser <awagger@gmail.com>
This allows re-using the function in QtQuick.
In addition TextBoundaryType is moved to QAccessible
and QAccessible2 as namespace ceases to exist.
Change-Id: I184bc2c181a22ca51ac4db4e5a080dc26d4acfe0
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
This token must be ignored by qdoc's hapless C++ parser.
Task-number: QTBUG-29444
Change-Id: I02a0c5926a3fa6284648a632341e38614a237a30
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
Change 595deca5 for QTBUG-22316 resulted in having titlebars only on
modal dialogs.
Change-Id: Ic23c957e0e95cf567d90831e105cc402465df982
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Note that GtkSettings is already used for retrieving the icon
theme name.
Change-Id: I935d903c703f7d832b0350d3cfd3a638f22d1391
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
This uses explicit handshakes between the application and the
gdbserver start and the host side by using the gdbserver socket
and two files ("ping" file in the application dir, "pong" file
in /data/local/tmp/qt)
The sequence is as follows:
host: adb forward debugsocket :5039
host: adb shell rm pong file
host: adb shell am start
host: loop until ping file appears
app start up: launch gdbserver --multi +debug-socket
app start up: loop until debug socket appear
gdbserver: normal start up including opening debug-socket,
not yet attached to any process
app start up: touch ping file
app start up: loop until pong file appears
host: start gdb
host: gdb: set up binary, breakpoints, path etc
host: gdb: target extended-remote :5039
gdbserver: accepts connection from gdb
host: gdb: attach <application-pid>
gdbserver: attaches to the application
and stops it
app start up: stopped now (it is still waiting for
the pong anyway)
host: gdb: continue
gdbserver: resumes application
app start up: resumed (still waiting for the pong)
host: write pong file
app start up: java code continues now, the process
is already fully under control
of gdbserver. Breakpoints are set etc,
we are before main.
app start up: native code launches
Change-Id: Iaa28b8664dbebc39022d1be7ff5533c52ce39715
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
The Android style is not fully implemented yet, so prefer the
Fusion style by default.
Task-number: QTBUG-29565
Change-Id: Ida413e6b34a41b618b8e2206688922195ffcc519
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
The mathematically correct way would be to set logicalDPi to
160*scaledDensity, but then a 12 pt font would be gigantic. On
iOS, we use a factor of 72 to be compatible with the native APIs,
but that means that a 12 pt font is very small.
A factor of 100 means that desktop apps look reasonable by default.
Task-number: QTBUG-29674
Change-Id: I607f110150fb95685a6980b92f6f92f2b489f959
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Calling clear_mapping causes the persistent indexes to be queried, and
mapped using map_to_source, so that they can be restored later. That
is not the appropriate response to the source model being deleted
because there won't be anything to restore.
Simply clear the stored mapping information instead so that the source model
actually exists when mapToSource is called by the framework.
Change-Id: I99692ee7aa9c6714aec45c68fe4a2d62be189d60
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The -redirect-documentation-to-dev-null option allows to get all qdoc
errors, without creating full documentation. It significantly reduces
amount IO operations.
Change-Id: I80fb6f9e304eb106f1c1d1e6320a1b38d788f6fc
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
When undocking a dock using the undock button on a main window
with native children, the dock widget goes to 0,0 (content
position) causing the window frame to be off-screen since
the frame is still 0,0. This change causes the frame to be
recalculated such that the frame position is 0,0.
Task-number: QTBUG-28872
Change-Id: I32896107cd7b982811f45de43dbad82e7407ea7a
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
