it differed from QMAKE_LIBS_OPENGL only for the irix/sco/unixware -cc
specs for not entirely obvious reasons. as all these specs are obsolete,
remove it.
Change-Id: I7d50ffa11ff830371ea52c9ebe25e1f1bc56b307
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
there is mightily little point in unsetting variables right before
unconditionally assigning to them.
Change-Id: I24c1814ce38bf9aab4496679b1a670f3cd55c536
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
If Qt is configured with -libdir /some/dir/outside/the/install/prefix/,
then for use absolute paths for the executables and include dirs too.
Change-Id: I5ccf62be6f93f97d934df62038fe4cd40dca9a93
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
all non-installed tools are properly registered, so they don't need the
fallback. conversely, we can assume that non-registered tools are
already installed.
this enables us to build docs in qtbase after an incremental
build+install up to qttools.
Change-Id: I95a55f6b84e01885bcf6dd656caf0dd2b679bb73
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This is the <prefix>/include directory which is independent of the
module and which only has to be used once. As everything uses QtCore,
it is enough to set it only there.
The CI system is a special case, in that it tests things before
installation. Handle that case too.
Change-Id: Idcdf9617e199b7d490cb3553cce07f1f464b3bec
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
As the Extras file can do things like append to a property (as in
QtCore for include directories), that is something that should be
done only once when the QtCore target is first defined.
Change-Id: I5163912bccfda1ff43a02eb01f67ac59e6f6b24b
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
the pkg-config file names follow the TARGET by default. as we create
frameworks without the major version infix, all references to Qt5* would
be invalid.
Task-number: QTBUG-29453
Change-Id: I82e7de017a8f17f7d2d7b4a2a61a180125ca29a0
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
it's not used for anything other than display, so we can put a space
there.
Change-Id: I77e156856efeaaa964ff3bf2369bcd5586bac7c6
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
there is no point in duplicating the information in every module.
host_bins is exported only here as well.
Change-Id: I2f816e1cade9761a2c0d97c7ca1c90293095bfb1
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
users need access to the Qt configuration, not some internals of
module's build system.
Change-Id: Ife3f668282969d444282d57152c11ed0f741076f
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
-rpath does *not* imply -rpath-link when x-building:
ld(1): "Searching -rpath in this way is only supported by native linkers
and cross linkers which have been configured with the --with-sysroot
option."
it doesn't hurt to have the "excess" -rpath-link for native builds, so
just remove the cleanup.
Change-Id: Ic39c1f4d6c2e3770d43a5ed3e56cf89a146edf85
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
if the libraries are in a non-standard location, but no rpath is used,
rpath-link is needed. this is often the case for non-prefix builds
(which have no forwarding pris any more).
as we cannot store absolute paths in the final pris, we need to store the
module names, and resolve them only at use time.
Change-Id: I1538b5d531611c76a2d7058a3b2ff683bdcbe427
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
as everything is built inside the common build/install dir, there is
no point in the fwd pri stuff.
as a "side effect", this makes it more straight-forward to relocate
non-prefix builds, which is the default on windows.
Task-number: QTBUG-28827
Change-Id: I010246a9ad87cf74974dc168768b1a8625f73260
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
move the regular pri file creation into the "sub-prf" and rename it
accordingly. the original reason for the split was the deep magic in
activeqt (and phonon), which is gone now.
Change-Id: If40e941afc9293725630ed6bcf3e4ef18a692f66
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
-developer-build enables an actual build of examples, based on the
assumption that developers want to test it (it can be still disabled
with -nomake examples). regular users otoh want only the examples
sources installed.
Change-Id: Ifc6a108099929175a3960480802b271a758fdd38
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
we need to collect the sources of the install targets for the check that
all files have been properly handled, but of course we must not add these
files to the source install target, as that would mean double installation.
Change-Id: I6acb56f2a993b6ed81d1031d5dc0a0da30a53b54
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Curiously, qmake could fix .prl and .pc files for unix, but only .pc
files for MinGW. qt_module.prf seems to have known this.
Task-number: QTBUG-28902
Change-Id: Ice9983a69813690c0d4b96ca11589440182569a0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Fully modular prefix build now puts the includes and libs into each
module's own builddir, so the else branch was simply bogus. Replaced
the else branch with the real base for modular builds. This allows
the paths to be successfully replaced when installing metafiles.
Change-Id: I056a923288965b560a4e9b0ba7add1aac912199f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
otherwise qmake will just take TARGET and lowercase and capitalize it,
which not only looks weird, but also does not match the Requires: fields
we generate.
Change-Id: I4a070ff256fffd2b780acb0361d4213d0032dbb9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Dihan Wickremasuriya <nayomal@gmail.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This is a less error-prone way to calculate relative paths.
Task-number: QTBUG-29110
Change-Id: If4509ef278e48dcf08bdcc904d21534b4c05993f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The header location for SurfaceComposerClient.h changed between Android
4.0 and 4.1, so we need to select based on the major and minor version.
Change-Id: I7a6408f8ba3c644facca3a7e64b8d68fde9c4472
Reviewed-by: aavit <eirik.aavitsland@digia.com>
Reviewed-by: Rainer Keller <rainer.keller@digia.com>
By using FramebufferNativeWindow Qt can render directly without going
through the SurfaceFlinger compositor.
Change-Id: I0538fca9f2e905c076ff5837dd73589ee9c632ca
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
The platform specific CFLAGS, most notably -march=armv7-a, were only
added to QMake's _RELEASE flags but not to the _DEBUG flags.
This then resulted in strange compilation errors such as this one:
http://qt-project.org/forums/viewthread/22141
Change-Id: Ib47996c6946b043294437e8543827da270df836d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Cross bulding on unix for mingw exploits the fact that makefiles
generated for mingw work with plain make. There is no mingw32-make, so
this is the only option.
Arguably, plain make could also be used in an MSYS environment,
perhaps detected by MINGW_IN_SHELL, but there might be good reasons I
don't know about not to do this.
Change-Id: I694c74046a307c2887af1c30cca36f95e242adc1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
this is much more elegant than the so far propagated !isEmpty(QT.foo.name).
also replace feature-specific tests (no-gui and no-widgets) and the
obsolete contains(QT_CONFIG, foo) syntax.
Change-Id: Ia4b3c8febcabf9eeca67b1f9173a523820b1038b
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Tasuku Suzuki <stasuku@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Fix MinGW build errors by using the standard main signature.
Change-Id: I0ebe7307a825a7ec50e654f163fbf8fe7060a478
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Generalize the check for gui by checking for needs_qpa_plugin
CONFIG value instead, which gui adds to MODULE_CONFIG.
Task-number: QTBUG-28215
Change-Id: I5834a3f81e5c3868ee1a3fa405ebc6410db1f900
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Using some modules requires importing static plugins also for shared
libraries (namely QtAxServer), so provided a way to force plugin
imports even for non-applications using force_import_plugins
MODULE_CONFIG value. This required moving the plugin handling after
qtAddModules calls in qt.prf.
Task-number: QTBUG-28215
Change-Id: Id6bb92ed7c078cc8c54538ddc9bb8e8ad316f277
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The location of the mkspecs directory comes from the archdatadir, which
distros will all set.
Change-Id: I20dbdce76db13dbd37eec065009e215f98985907
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
qt is already added by spec_pre.prf, warn_on and depend_includepath by
default_pre.prf.
Change-Id: Ic00e0ba496d698ed9659c476f2ca99fc0f86a093
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
When building Qt static, plugins get module .pri file, but those files
do not get installed in Windows. This is because both .pri generation
and install target statements are scoped with !build_pass, which means
Makefile.Debug and Makefile.Release do not get install_pritarget
target.
Fixed by doing only the .pri generation in !build_pass scope.
Task-number: QTBUG-28606
Change-Id: If3f49b578af1d9171a8bce67793ecb3f902a6da8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
it's the very antithesis of modularization to do it.
Task-number: QTBUG-27722
Change-Id: I2540e1a70e67b55420246d0c209314c05c65a85f
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The variables these files refer to are not set anywhere anymore.
The Unix thread.prf file is still needed, as it is still effective and
is activated by qt.prf.
Task-number: QTBUG-25106
Change-Id: Ia514192d28785205df3710d78ee597285d4136b0
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
rpath is meaningless for static libraries.
and windows has no concept of rpaths to start with.
Change-Id: Ia02bbdfbf7112e7082175c3051c0839ac0900f57
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Since all gui applications already need some QPA plugin added,
we might as well add the default plugin and generate the code
to import the plugins automatically.
User can opt out from the automation by removing relevant
items from CONFIG variable: link_qpa_plugin or import_plugins.
Task-number: QTBUG-28131
Change-Id: Ic171c363464c099143374d3e39bcc28f6edf73d2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
generally, don't install anything from the top-level examples dirs
automatically. the global README and the aggregator examples.pro are
installed explicitly.
Change-Id: I5f6b8760f37d917b800fa85979896a471778cac0
Reviewed-by: hjk <qthjk@ovi.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the feature was backported to qt 4.8, and people apparently started to
rely on it. it doesn't add too much overhead when not used, so enable it
by default again.
Change-Id: I15890027603ede733347f2c05b36ad1389c649cf
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Nikolai Kosjar <nikolai.kosjar@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
so other modules can actually re-use the code without referencing qtbase
sources.
Change-Id: Id66f07b476e539273dd32455e7642a17d7e5d0ef
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Configure will now generate QT_DEFAULT_QPA_PLUGIN qmake variable
to specify the default QPA plugin.
"CONFIG += qpa_default_plugin" statement in application .pro file
will add the default QPA plugin into QTPLUGINS.
"CONFIG += qpa_minimal_plugin" statement in application .pro file
will add the minimal QPA plugin into QTPLUGINS.
Task-number: QTBUG-28131
Change-Id: I12a241005f30b37467d783b50f0369b47e605e68
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Platform plugin is needed always when gui is linked to an application.
This is tedious to do manually for static builds, so provide support
for generating a source file that imports static plugins for
application projects.
"CONFIG += import_plugins" statement in application .pro file will
generate required import statements for all plugins specified with
QTPLUGIN variable.
The plugin class names are found from plugin's module pri generated
automatically when plugin is built, as long as the plugin specifies
the PLUGIN_CLASS_NAME in the plugin .pro file before loading
qt_plugin.prf.
Task-number: QTBUG-28131
Change-Id: I19f8ea48a3c1e9b5c81f4399c4b5d439a6d4bea1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Usage of QTPLUGIN implies static Qt, so only handle it when that is
true so user projects do not need to scope it if they support linking
against both static and shared Qt.
Change-Id: I011b4672bac122d7d64d8f2fc0e41ca7e5251dfc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Since QTPLUGIN variable values are used to locate both the plugin
library and the module pri file, those must match. Therefore generate
module pri file name using the TARGET of the plugin rather than the
pro file name.
Change-Id: I9ec6f2a087ba3b3cecf7034c8a28b31df155cd97
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
there will be more template data, and it wouldn't be too nice
to spread it all over mkspecs/.
Change-Id: I909c48d26ac34f8c0f66051a65d326366d49c096
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
this should have been in 048b697c07.
Change-Id: I8589453ef937db1a9a446b0e5d01bb830b0cf6b0
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This follows the same logic used to set bsymbolic_functions.
Change-Id: I9300eab8a1b6673c4409b5dd07b40123fdf00d69
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The contents of this eventually go into a CMake target
property IMPORTED_LINK_INTERFACE_LIBRARIES, which seems to expect
sorted input. Usually the contents is generated by CMake itself,
so generating content it expects is reasonable.
This fixes the qtactiveqt cmake unit test with MingW on linux.
Change-Id: I2a540bea5c3ac214ad4e1dfedfb7cbd2f863472b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
now we may get files with several mentions of the same lib/include dirs
on the same line, but that's essentially a non-issue.
Task-number: QTBUG-28336
Change-Id: I8204086420b82015f62090ae0a56908ce0cccee8
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this seems more generic, and allows for more substitutions inside the
generated files.
Change-Id: I7a2e37036f9f9f7dbf7f28f0976ef427dd28ee82
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the "export location" of the linguist tools was just bogus, and lconvert
was missing anyway. the two dbus tools and qdoc were missing, too.
generally, it seems useless to report the paths of some random tools -
instead, just report the install location of the host binaries and let
users figure out the complete paths themselves - this should be ok, as
we decided that distributors are not supposed to do tool renaming any
more.
for the binary path just use the final location, as the files won't be
used before installation anyway. this allows us removing the scary
generic prefix replace from the pc file installs.
and as a side effect this also fixes debug_and_release builds of core
and widgets by not loading various prf files prematurely and thereby
messing up the dir replacement magic.
Task-number: QTBUG-28286
Change-Id: I99de419301fc07fb923959db4bd5cab9072d1c31
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
in particular for the meta Makefiles of debug_and_release.
the logic is as follows:
- the meta targets ('html_docs' in prepare_docs mode, and 'docs' always)
need to branch out asap, so they are implemented non-recursively in
every makefile.
- all other targets need to be fully recursive. the meta Makefile will
recurse only into one of debug or release, depending on the configure
option (it doesn't matter anyway).
Change-Id: I4e3f714cdda9c3a1021743148b5ee73379e3484d
Reviewed-by: hjk <qthjk@ovi.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
there is no reason why something should break out of the system.
Change-Id: I081bffc0927b43ac4940d0200e32e1e60f6f2e97
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
complementary to QMAKE_RPATHDIR. this avoids that we need to sprinkle
linux/gcc specific code all over the place.
Task-number: QTBUG-27427
Change-Id: Iebafd1749d1a0d803704902473df8c743f074ddc
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
all modules have been migrated to auto-generation
Change-Id: Ie7b3ebfd735a22f8e0b0339909b6385508d7a6b3
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
turns out that some modules need a lot of work, so make it opt-in for
the time being.
Change-Id: I16365e3d96adab98a1bc748907dbd67488dfad5f
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
instead of letting *every* qmake-based project have recursive check target,
let interested projects "subscribe" to it by adding CONFIG+=testcase_targets
in a central place (.qmake.conf, which Qt itself does via qt_build_config.prf).
Change-Id: Ib13fdd2d3a1adee0c5ad02b6b176a664c583bf9d
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Also change Trolltech for QtProject in other places
Task-number: QTBUG-23269
Change-Id: Ie4e344f23cab77c575562d18b481b3369ce30491
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Add a 'd' to debug builds to allow both release and debug builds
to be used.
- Add .def-files for Debug
- Build all libraries debug/release
- Add description to README.qt
- Differentiate debug/release in qmake.conf.
Task-number: QTBUG-28196
Change-Id: Ib3081004a6ed2ad71d353244154684d2e0ebbc86
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
QAxServer projects must not link qtmain.lib.
This awful hack was adapted from the old qaxserver.prf
Change-Id: I78b4cbf6714bfbd88341449b9230f1989cff8a6f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
we directly expand $$TARGET on the same line, so just do the same with
$$VERSION
Change-Id: I3601bfcc835b13f63dce43d00cfe8d34ded60b21
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
we are assigning QT.*.VERSION from VERSION a moment earlier
Change-Id: Ie4d51f8835b8050755bc399a1a597967c8e3e499
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
ActiveQt needs this, and it sets the no_module_headers flag.
We still need to set the include_dirs variable in the
no_module_headers case, so that its dependencies are added to it.
Change-Id: I2cad5ee792eed51d36b7c8e2c616763516a5fc10
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
it's confusing for the users if the examples' project files contain code
to install their own sources. also, this constitutes an enormous code
duplication, and lots of mistakes. consequently, automate it.
more or less as a side effect, this also removes the entirely meaningless
target installs in subdirs projects.
Task-number: QTBUG-28184
Change-Id: I9fc1367a06db9e2c46aeb67d68729a4f67163ef9
Reviewed-by: hjk <qthjk@ovi.com>
instead of letting *every* qmake-based project have recursive docs targets,
let qt modules "subscribe" to it explicitly by having load(qt_build_config)
in their .qmake.conf (which they already do).
Change-Id: I97b74591fd0c4bd5f8b08c5f550df9c7eef2f556
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
User applications are those that users run directly, whether it be for
development or not. The executable binaries that the user does not
usually run but is still required for proper functioning are called
"program executables" in Autoconf and they are placed in libexec.
This commit adds support for "program executables" in Qt by adding the
-libexecdir option to the configures, the qmake variable
QT_INSTALL_LIBEXECS (note the plural, to match all other properties),
and QLibraryInfo::LibraryExecutables.
At the time of this commit, the only expected "program executable" is
the QtWebProcess, the WebKit2 helper process from QtWebKit.
Change-Id: I66c3a3e0cf7f9d93b5f88f55f18e957faff608fc
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
- the old docs target becomes html_docs
- a new qch_docs target is added. the .qch files end up directly in
QT_INSTALL_DOCS, wihout any subdirectories in between
- the new docs target invokes html_docs and qch_docs
- respective un-/install targets are added as well. note that the
install targets don't depend on the build targets, as it's virtually
impossible to get the dependencies right throughout the hierarchy.
Change-Id: I07a2589db8252371e77cf925c47c4e59fbd1b2ca
Reviewed-by: hjk <qthjk@ovi.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
* relro makes some sections read-only before giving control to the
program;
* now resolves all symbols when the program is started and allows for
the GOT being marked read-only to prevent it from being overwritten.
These settings have been used internally for device builds already.
Change-Id: I9f62fffe618c75748e2357d1686289c23c5dbee5
Reviewed-by: Greg Bentz <gbentz@rim.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
... so the compiler knows which instructions to generate and can
optimize for the specific CPU.
All BlackBerry platforms are Cortex-A9 compatible.
Change-Id: I3fd22e63af12f704365f494bbb7138963b4c4ec7
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
The include paths that the mkspecs set into the OpenGL/AGL frameworks
must take the SDK into account.
(The headers in 10.8 have slightly changed wrt 10.7, leading to compile
errors because framework style includes (<OpenGL/foo.h>) within the system
headers are resolved to the SDK framework headers.)
Change-Id: I6113cdb95b462d587f593682e03e81e920f3f672
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
On QNX e.g. you'll end up with a Qt configured without pkg-config support
by default. Once you try to compile e.g. QtWebKit which contains a check
like packagesExist(libudev) the system pkg-config (see default branch
of pkgConfigExecutable) will be called without any special config sysroot
or libdir. Thus libudev will be found in your system host, even though
it is not available for the cross compile target. This leads to compile
errors as described in https://bugs.webkit.org/show_bug.cgi?id=98032 .
Change-Id: If1474cb3b3f3b71fad7269e4aedd4e10f70a9b2a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Added prepare_docs to qt_build_config.prf (it was added
directly in configure in the source branch)
Conflicts:
configure
tools/configure/configureapp.cpp
Change-Id: I1337c69fc62b1c934e3e39b4409e4857440c9db8
This commits adds a -qmldir configuration option for the configures to
allow the user to change the default location (it defaults to
$archdatadir/qml).
It adds a QLibraryInfo::Qml2ImportsPath value for
QLibraryInfo::location, a qmake property of QT_INSTALL_QML and a qt.conf
configure location entry "Qml2Imports".
At the same time, it makes the qmake .prf files dealing with QML plugins
be the QML 2 version. Those files are new in Qt 5, so we have the option
to choose which version we want to use.
Discussed-on: http://lists.qt-project.org/pipermail/development/2012-October/007136.html
Change-Id: I8c1c53e8685a5934ed0a9a42ba5663297b81a677
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Project Builder was replaced with Xcode in Mac OS 10.3.
The xlc compiler is not in use on OS X any more.
Change-Id: Ie9150243cf5594a70f692a6841ee8221a2fa9ddb
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
as a "side effect", this fixes the build of bootstrapped tools when
doing a debug build under msvc: qt.prf would add CONFIG+=release after
default_post.prf already loaded debug.prf.
Change-Id: Idd17cf28d358950fd90bb18ca7a8d67e06953bc1
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
This ensures that for example the platform plugins get properly
re-linked when the static platform-support lib changes.
Change-Id: Iad493d4de30d6f6977f80aa56d0b27d05e9e3770
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The printer support API has moved to printsupport module/plugins
Change-Id: I6fdc6c08e600d0f7cc8d79bef808227b54880904
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Change-Id: I3b277316b1befbb57613b465fc5bbedc6b2305f7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
the fallback path wouldn't account for a sysroot. as there is no clean
way to implement that, rather remove the fallback alltogether and make
the rpath a mandatory part of modules.
Change-Id: I6f2bd6e36889be2f61e17a579174380aa3c6622d
Reviewed-by: Romain Pokrzywka <romain.pokrzywka@gmail.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Making a properly installed libQtBootstrap simplifies
our tools build process a little and in addition allows
other comand line tools to use the bootstrap lib and
link against it.
Initial-version-by: Lars Knoll
Change-Id: Iddf4568a5505bc24898ec1abf7e7022e19f0a454
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the respective flags/defines need to be prefixed with a minus sign.
Change-Id: I8a3a46254f90d4ecdbd692a0eca635038691d078
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this makes it possible to configure with -nomake tests, but have, e.g.,
QTSVG_BUILD_PARTS="libs tools examples tests" to enable tests
specifically in the svg module.
Change-Id: I925ab955ac32ec3e311c2a852a51b098fd4e0ea3
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Janne Anttila <janne.anttila@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
qmake automatically appends the library's major version number to the
DLL file name on Windows, as DLL naming doesn't include the version
number on a suffix like on Unix systems.
This flag makes it so qmake skips adding. This will allow us to insert
Qt's major version number at a different position.
Change-Id: I25d471038841fb0c5a34ef6b3bd6266aa33cebd1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
otherwise we may remove a user-provided setting.
Change-Id: If3217a3d92938fe2f3ac3740a645d3ace0ce9ab0
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
it's basically an attribute of qtcore (and everything that depends on it).
Change-Id: I6eeefeb5df70764399d9f22dca9dbec1843b8d68
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
we now have qt_build_config.prf which can contain static code.
Change-Id: I3f0ae142fdc5ffb4e1d25e628e809ba15b5f0ac4
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the function is automatically performed by debug_and_release.prf,
regardless what we do with this flag.
Change-Id: Iddec69b35e0e905fdf4133ee240af37d3a8ada0b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
... and use them in qt.prf instead of (not) maintaining hand-coded lists.
Change-Id: Ia21f7864eaf3ca92fa75f23876f71075d0521f4b
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
this is less expensive, as qmake already provides us with it.
Change-Id: Ifb44ea9126e6b52c02025858c5d88032e7a6cc2a
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
it now defines the DESTDIR and creates an INSTALLS rule.
Change-Id: I15a462ccad9acbe3521c352fa98327825dc27c05
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
these are in fact thin wrappers around the qml2 variants, which got
respective hooks.
Change-Id: I1190856aea3f454b6f163e147d39c707a35ec4c6
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
set DYLD_FRAMEWORK_PATH instead of DYLD_LIBRARY_PATH
Change-Id: I9849f12063b8c7a45d040c087f4611c3a48180b8
Reviewed-by: Johanna Äijälä <johanna.aijala@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
while plugins for libraries need to follow the -debug-and-release switch,
plugins for tools must follow the single-config approach of tools.
Change-Id: I8a79e98034d2ff8b5d4e6191a9143c9472a5aa02
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
we now have tool and soon plugin pri files. make them easily
distinguishable.
Change-Id: I8904e4182227a78060121e8712446bc43b1dd185
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
use $$MODULE_BASE_OUTDIR & $$MODULE_QMAKE_OUTDIR directly.
this is a no-op, except that now module pris will be built in qtbase for
all modules when building without -prefix - which is only consistent with
all other artifacts.
Change-Id: I2965b2c7a15aa9e82ba6017f5f4c0daa14b6e6fe
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
it is a bad idea to extract plugin paths from library modules.
instead, just collect plugin paths from all known repositories.
Change-Id: I527325f20e9cf98ae974997530af1b2893537e5d
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
qt_debug & qt_release are dead, so collapse the respective paths and use
an existing function.
Change-Id: Ie800be477186a6eab72682d367b24e83c3b9bbc0
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this is qt module specific magic that has no business in the generic
default_pre.prf.
a side effect is that every qt module now needs to have a .qmake.conf
(unless it sets MODULE_QMAKE_OUTDIR, like webkit does).
Change-Id: Id9e5f6eee2d8ec0c711e7217d9e1893fc9c88132
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
should now actually work for all build types
Change-Id: I2dc1f8231737c13e95ce8aab1330b4f063951547
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The new 'prepare_docs' CONFIG option triggers the documentation rules in
default_post to generate two extra targets: prepare_docs and generate_docs.
The prepare_docs stage runs qdoc with the -prepare option, which means qdoc
will only generate index files, and the generate_docs stage will call
qdoc with -generate, which reads the index files and generates the final
output. The regular docs target will then run the prepare_docs target
for all submodules before running the generate_docs target.
This ensures that when generating the final output, qdoc has all the
index files for all the other modules available, to be able to resolve
cross-references between the various Qt modules.
This patch needs a follow-up in qt5.git to add CONFIG+=prepare_docs, so
that the root Qt5 build will be able to hook into this new behavior.
Change-Id: I654d7f0d4d5a41d9be208e6d3a8923bf0194f9ad
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Clang's libc++ does not support 10.6.
Add mac-minimum-version.conf which sets the version
to 10.6. Set the version to 10.7 in the clang-libx++*
mkspecs.
Change-Id: I494d0d24b0d73d9395e9d5406c8c63c9af87f8cc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Erik Verbruggen <erik.verbruggen@digia.com>
By depending on a simple variable instead of a more complex expression, we
can more easily use this file from other contexts.
Change-Id: Ib6ce1e2537f3e7ac19d25ad33454f25e85f71040
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Having them empty is the common style and is less noisy.
Change-Id: I30c0c4d297a7bdb373a57a636f4fdbc488a69fcd
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
It's actually looking for the mkspecs (so it can read qconfig.pri to
get the Qt version), so give it exactly what it wants.
Change-Id: I2957b2d93a8837b8492d313209d45ff3ec01704c
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Just like 'make docs' is used to build documentation, you will now have
to run 'make install_docs' to install it.
Change-Id: I57db53160ca91618784f4e39da0a47322c070208
Task-number: QTBUG-27590
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The qmake function prepareRecursiveTarget can now be used both by the
existing logic in default_post, as well as future recursive targets that
will be needed as part of the modularization of documentation builds.
Change-Id: Ibc72c3e224cb57c9f1796de3b04fda9de663dbb4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
that way we don't have to auto-generate code for that in the configures.
note that we now load qt_build_config.prf instead of just qmodule.pri,
which means that exceptions_off is set everywhere. we forcibly re-enable
them for testcases to minimize the deviation from default 3rd party usage.
testlib selftests are not qt testcases, so the one that needs exceptions
needs to enable them explicitly.
Change-Id: I1b9360bb11f2e80c92a2b63a7c45991ad17fda1b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The -qtls option is needed when building with thread support so it can
use the local thread storage.
Change-Id: I693d944efddac911fe03b2c9a6b06a28f112b54d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
The content in the prl file is not compatible with what CMake
expects in the value of the IMPORTED_LINK_INTERFACE_LIBRARIES
property. That property expects a list of IMPORTED targets or
full paths to libraries.
The prl file gives us a whitespace separated string of content
suitable for passing to ld, that is, it contains -L and -l content.
As this would take a lot of error prone parsing in cmake code in
order to resolve the content to a list of full paths to libraries
(which can be processed by any cmake generator), it's better to
remove the code until qmake is able to generate a list of full
paths.
Change-Id: I72fe8e862b7f3bd25a7f9a03db94d2e9b815d08a
Reviewed-by: Brad King <brad.king@kitware.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Make sure that both debug and release versions of QML plugins are built
if Qt is configured accordingly. Also pass on the other QT_CONFIG configurations.
Change-Id: I4aaaf002068dd66277235bef7d1e3da3366d6d12
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The default symlink is not available on Windows, so the qplatformdefs.h
header is not available there. Instead we can bypass the symlink and
use the actual mkspec name directly.
Change-Id: I1d7e05f35c1ff56befab5bed307cb1755ade8377
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
It was only needed by qt_module.pri anyways, to handle index lookup
paths for qdoc when building documentation that depends on other modules.
Change-Id: Ibf60e2504f388b1aed7231eee04d89d3ba31c6eb
Hand-held-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This option was necessary in early ICC 12 releases because of a
difference in interpreting the ABI requirements with GCC. According to
ICC devs, GCC changed the ABI on its own to require 16-byte-aligned
stacks on i386.
It looks like this option has been the default in later ICC 12
releases. At least 12.1 update 5 has it by default. ICC 13 does not
have the option anymore but accepts it silently for backwards
compatibility.
Change-Id: Id8bb4c250718eef2f02dc97bd47a0efd95b272fc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
qdocconf files can now reference $QT_INSTALL_DOCS to pick up e.g. global
includes, instead of using relative paths. Qt modules will automatically
get a doc target that builds and installs into the right place (including
supporting shadow-builds) if they set QMAKE_DOCS before loading(qt_module).
Change-Id: Ia408385199e56e3ead0afa45645a059d1a8b0d48
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
The generated CMake files need to pass ';' separated libraries to
the IMPORTED_LINK_INTERFACE_LIBRARIES property, otherwise we get errors
such as this:
http://testresults.qt-project.org/ci/QtTools_master_Integration/build_00386/win32-msvc2010_Windows_7/log.txt.gz
(grep for QtCore5.lib.lib)
Rather than a naive and error prone replacement of whitespace, generate
the appropriate ';' separated content directly in the qmake prl file.
Change-Id: I8eb5e233a0318b57ec74b86d910583ff99c29415
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Brad King <brad.king@kitware.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This change is possible due to commit 18654058
As it's now possible to use configure's -sysroot without
gcc's --sysroot, it's possible to use configure's pkg-config setup
(which comes with its -sysroot). This gives the possibility to
simplify the mkspec and be in line with the other device-mkspecs
Change-Id: I0f34ec2c5c7b06334ad3c1605001c0803272b027
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Enable eglfs build against any android > 4 tree,
linking to native libs without emulation layers,
running on top of surfaceflinger.
No GNUs where harmed in the process.
Yes, any android.
Tested on maguro, tf300, eeepc-x86
x86-64 compiles but broken elsewhere.
You don't need an Android.mk, but you must compile from within
a shell setup with androids "lunch" or an equivalent that set TOP and OUT.
Since we do callbacks to androids build system,
the same env restrictions apply (must use gnu bash, and gnumake 3.81)
Done-with: Samuel Roedal <samuel.rodal@digia.com>
Done-with: Robin Burchell <robin+qt@viroteck.net>
Done-with: Brian Avery <brian.avery@nokia.com>
Change-Id: Iec0178cdeadbeefc79e4fe6ef449d399ac8ca666
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
The library name changed back from quick1 to declarative, so the
debug option should be renamed accordingly.
Change-Id: I192520a0a4de4764cf93da8cdbb14e24ba7de093
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
stack-protector-strong gives performance benefits over
stack-protector-all and is still checking more than -stack-protector,
so seems to be a good middle way and we want to use it when it is
there.
The -shared option for the compiler (not the linker) prevents a
RIM internal version of qcc from forcing -fPIE, and should not harm
in general when set.
In addition, add a method "compilerSupportsFlag" for Windows as is
present in the Unix configure script.
Change-Id: Iba300e9cb82f34043e7b36f8e45287a1aed2a1a5
Original-patch-by: Greg Bentz
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
The wrong variable was used when reading the module settings
Change-Id: If35dc9694240a68393b24d7dba72520108cb9ac3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The module rpath should be the raw QT_INSTALL_LIBS, without the sysroot
Change-Id: I4140929b38a589134872593e4ce35eaf7d1cd5b7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
All bugs in the testing scripts are now fixed.
Task-number: QTBUG-27087
Change-Id: I764257a9bbee7efeb9265449f6fa6a15bdeba883
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
We need to make sure to put the .lib file into the LOCATION property,
not the .dll file, when building a static library.
Change-Id: I8912abfd172d0939cd07ba02901ab58093ccefa1
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
As was done in ae6d4c77eb, but that commit
missed the mingw branch.
Change-Id: I1d76ed2f8070dced2749aabe889fee48c4086744
Reviewed-by: Peter Kümmel <syntheticpp@gmx.net>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
It looks like the qmake process failed if cmake is not installed.
Change-Id: I721796a602d8c572144e9d21be5d62b737698b73
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
it's mostly win32+gcc, but sometimes there are library differences, so it
makes sense to have an own platform flag for it.
Change-Id: I985f0dd39a47bfc16f10f4b4a9c168874ae2f20d
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
on the way to eliminate scoping based on the spec.
gcc and msvc go as such into CONFIG, the other ones get the vendor
prefixed, as most are mostly unknown and thus likely to clash with
users' flags.
Change-Id: Ie622f53d90e96dbf05ce7d8c638cd355f04fa20c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
webkit actually tries to set it, and after the syncqt invocation changes
we were breaking it.
Change-Id: I1ec740b7e96c972ca173f384529dde1fc7e7cc13
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
for one, the syncqt invocation is qt module magic and thus simply does
not belong into the generic default_pre file.
second, this way the forwarding header generation is now linked to the
rest of the build magic for a particular module, which is way less
confusing for the unsuspecting developer.
Change-Id: Idc8e420d3faf173d7fff4a41e6e1c59af15c3023
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the surrounding TEMPLATE == vc* scope already implies vcproj, as dsp is
not supported any more.
Change-Id: I68363aca62e21135f42572040ccc7b189dcf32c8
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the variable can contain a complex command which would make a mess of
the makefile.
also, the tool doesn't change all that often, so it's not particularly
useful to depend on the binary.
Change-Id: I965d6555cb22bd6d5306b324f5cad0d747128e99
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
qmake's new parser can deal with this much more readable code.
Change-Id: I772c9da4c9d049e2b332305f41496ed1196f60eb
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
so it's available for other users as well
Change-Id: I2d5a14ae427575c07321ac532b13ee03308b837f
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
it's been superseded by the QTTOOL.* module stuff.
Change-Id: I01c9fc3ebbb22111bfb03f82693c7cf08b5fc9d4
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
it must be defined, even if zero
Task-number: QTBUG-27232
Change-Id: I950ef61ede197af9c2d8aedddd712cc6d4cc745b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
See the bug QTBUG-18361 for details.
Change-Id: Idbe2043c07cca795e8e2fca8204993dfb0a11988
Reviewed-by: Simon Hausmann <simon.hausmann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Those compilers are old and untested. Qt is only tested with ICC 12.1
and 13.0.
Change-Id: I3a5fa9452de27a61ee087700cc054a76fe4160ee
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Removed QT_GUI_DRAG_DISTANCE & QT_GUI_DOUBLE_CLICK_DISTANCE from the
iOS qplatformdefs.h header as these values are dependant on display
pitch and should be calculated by the platform plugin.
Change-Id: I00c377483ad73cad19a2fe729cb3f45e9271e3ac
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
this is where the syncqt calls for all modules happen
Change-Id: I544e5fa6950c2babe56d78f5543d2c3262016687
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
This means user applications will default to Qt 5.0's API. Higher
versions or Qt 4 compatibility are opt-in.
Also set the default for Qt's own build to be 5.0 on all platforms
except Windows. On Windows, we need to set it to 4.9.
Task-number: QTBUG-25053
Change-Id: I603e0fda4785e64e1413cd82153a89e48005aa40
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
"CONFIG += qt warn_on release link_prl" is in every single spec (though
for link_prl there is one genuine exception and two apparent omissions).
Change-Id: I72e1e315586af828eefa3b0b70998ab892ec3c1a
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
there is no reason whatsoever to duplicate this so many times, and even
less reason to have specs with a deviating default.
Change-Id: Ia25836c079580adebc373697b8bd03598f79c69b
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
not strictly necessary, but nicer.
QMAKE_PLATFORM (and thus CONFIG) now also contains the name of the OS, and
its family (if applicable, e.g., bsd). this also adds more feature search
paths.
Change-Id: I3ab971e6e3b2b32cae53b95e4bc67a86688bc5cb
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
DEPENDPATH is hard to get right, and consequently most projects have
broken dependencies.
the easy way out is just adding everying in INCLUDEPATH to DEPENDPATH,
like we do ourselves in qt. if somebody wants to optimize, he can
opt-out.
Change-Id: I7fb56010728fd2b0d2b7d4d26386f366d414ba04
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
in modules which conditionally add dependencies it is hard to keep $$QT
free of duplicates at definition time, so clean it up when we use it.
Change-Id: Ia711e23bec3683525dfca80df4834e20b007ba1f
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
foo.name = VAR
foo.value = baz bar
foo.CONFIG = prepend
QT_TOOL_ENV += foo
will add the respective environment assignment to the generated command
line.
if value is a list, the elements are joined with the shell's path list
separator.
the value must be in the final form (correct path separators and
shell-escaped).
if .CONFIG prepend is set, the generated command will prepend the
new value to a pre-existing one.
Change-Id: I62c6dfb3ec50ce73d3a85a2099275f92b57a52dc
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
RIM is committed to supporting Qt on its platforms and the port works
well.
Change-Id: Id6bfea2dbc178800adad89d436ce31c40d3eb652
Reviewed-by: Nicolas Arnaud-Cormos <nicolas@kdab.com>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We do not need to include -lang-c++ more than once in QMAKE_LFLAGS*
variables. The fact that this was not appearing more than once was due
to QMAKE_LFLAGS being overwritten (rather than appended to) in
qcc-base-qnx.conf and a weird coincindence in qmake's code to dedupe
libraries passed in to QMAKE_LFLAGS. The deduping was working based
upon options beginning with "-l", including the -lang-c++ option here.
Change-Id: I983f216c0e362a9fe6a924074c5d84aaa659a14f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The MODULE_DEFINES is also used by create_cmake.prf, whether there is an existing
pri file or not. In the case of QtWebKit at least, there is still a handwritten
pri file present.
Change-Id: I566c32a36aa6b84a455c2785c0da2bae57ea9091
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Change-Id: I76cad71c96a5def170715568e6a16b1168cbb2cd
Reviewed-by: Volker Krause <volker.krause@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The deployment of cmake onto Windows test machines caused test failures
with no changes to the code under test. Mark all the ctest tests as
insignificant until the failures can be fixed.
Change-Id: If0cd4001ae6ec49fd38b9e0f97dd5326fddae433
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change-Id: I36ba61bd4690de0bfe4a44e579eb554c82b53bb4
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Change-Id: Iad0161969e3632862102703fcc239358387e2181
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Peter Kümmel <syntheticpp@gmx.net>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Parse the prl files generated by qmake to get the link dependencies. They
contain all the information we need, and they are the only location with
all the right information.
Change-Id: Id9dcc988f20a744297502eff008de085326cdbcf
Reviewed-by: Brad King <brad.king@kitware.com>
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This reduces dramatically the command-line for compiling Qt sources.
These are private macros, only to be used by Qt's own modules, so the
compiler setting is either the same or, possibly, better. In other
words, in the worst case, when compiling a module with a better
compiler than for qtbase, such module might not enable all the
functionality it could otherwise do.
If we switch to a buildsystem that can support this properly in the
future, these macros should be removed.
Change-Id: I71f2d12ec98c9dd40eaab9de4a17446bd1066020
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
hard-coding it in unix.conf was no particularly good idea for hopefully
obvious reasons.
the windows version is so far just a stub that does what the makespecs
hard-coded - more doesn't seem worth the effort. the guys interested in
x-building may want to rectify it at some point, but it's not going to
be easy.
Change-Id: I8fedd841a8416f8c0c57018752eae9510b5d00d0
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
LIB_LOCATION is a cmake variable, not a qmake variable.
Change-Id: I1ec2feaca0c52400bd21dec371c9170dc95227b1
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Change-Id: I5362ae87c90fe08460599602b54484b6d4491db8
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This guarantees that qmake gives them the proper flags (non C++) while
building these asm files.
Change-Id: I41150f543b8fac81bcd0da963b4d0e0a19b9db2f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Making -lang-c++ integral part of the $CXX command was wrong, because there are
cases where $CXX must be called without the -lang-c++ file (when building asm
files for instance). This commit moves the -lang-c++ to $CXX_FLAGS where it
belongs.
Change-Id: I667c8d722105c6117fcd8ff3102dbdfcb890b24f
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
When embedding manifests we modified the EXE/DLL after linking using
the manifest tool. This breaks the incremental linking feature of MSVC.
The MS way to embed a manifest without breaking incremental linking is:
- let the linker create the manifest file,
- create a resource that contains the manifest file,
- invoke the linker again to embed the resource.
The embed_manifest_{exe|dll}.prf files have been removed.
All manifest logic is now in qmake's nmake makefile generator.
With QMAKE_MANIFEST one can specify a custom manifest file that gets
embedded without disturbing incremental linking.
Task-number: QTBUG-22718
Change-Id: Idb9d2644a0577b2002cbdd2d62b695b9171b1bd5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
this puts the whole logic of assembling those paths into qt_module.
Change-Id: Iafbe3969e3092e294bdb8243b2dffa7a899a7eb8
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Revision 6f4ff81380 broke the
QtDeclarative build. FreeBSD's ld.so is using the LD_LIBRARY_PATH
environment variable as well.
Change-Id: I0a91cedfb9d1935a08d348212f5ff1a54bfe3e53
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
a module's project file may set MODULE_INSTALL_LIBS before loading
qt_module.prf to have an alternative RPATH linked into the users of that
module.
this is relevant only for linking against non-installed -prefix builds
of that module, as otherwise .libs from the module's pri file is used
for rpath.
Change-Id: Ib240e748cf130a71a5991dc643c368a983092ead
Reviewed-by: Simon Hausmann <simon.hausmann@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
forwarding module pris get rpath_link{,_private} fields, which are
used accordingly by qtAddModule().
Change-Id: I0abc2dc8b1e8744dbf7f439aa7fed9ae159c2c74
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
QMAKE_LIBDIR and QMAKE_FRAMEWORKPATH have the downside that they
always effectively end up in LIBS, which makes for weird prl files.
Change-Id: Iaf61b0038504ff91ae5ec7f9b1255fe3a2d134f1
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
this saves some repeated calculations. also, it's nicer to have most
logic in one place.
Change-Id: Iea362d40f5e6203709ced94d29ca61a4163b8e69
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the variable name is a function parameter now
Change-Id: I46f3ce37c157312e7f70291a0cef2d666d50664c
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
When incredibuild-xge had been turned on by configure then it was not
ensuring that the generated vcproj files had the right extra comments
needed to make incredibuild run moc and other tools in parallel. By
fixing the prf file to get around a problem in the parser this is now
respected.
Task-number: QTBUG-14482
Change-Id: Ifd24bde2db7d80d3a52719c733d15f228c7b3534
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Hard float enabled Raspbian image is now primary platform provided by the
Raspberry Pi foundation.
Change-Id: I2d59ad26fac459907b4f51764975a3e6e29c6033
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Thomas Senyk <thomas.senyk@pelagicore.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
They had no effect anyways due to the check in the embed_manifest*.prf
files.
Change-Id: I3cd145030876d91948794d376a18a47e297f3b3a
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
this is more logical, following the qt_plugin and qt_tool scheme.
Change-Id: Ib3b2abec6728cdab260e15128b1cd78e8e6f5d6a
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this makes it comfortable to create qml-only modules
Change-Id: I17a5a3ee24210b93db05e50502c6ca91a4e7a9d8
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
when doing a non-prefix build (which is the only case where the code is
executed), the build location is always the same anyway, so there is no
use in complicating things.
Change-Id: Id98755d818e05a11bed505abcb8b9d52a7d5b7c4
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
non-installed -prefix builds can't do anything useful with qml plugin
files anyway, so don't waste time on copying them.
Change-Id: I23f4b8f67402a85d3c6e741a04f88567655c1655
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
load(resolve_target) must not be called before we have a final target
name.
Change-Id: Ia7418672b0c7b7fbd388a63819af9ea9a54c5241
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Microsoft has named their new Visual Studio again
after the old naming schema.
Change-Id: Ib1b971807fa89d90b10892a2d78570058e564f3a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Nicolas Arnaud-Cormos <nicolas@kdab.com>
this does the same as PKGCONFIG, only that the libraries end up in
LIBS_PRIVATE, not LIBS, which means they don't end up in prl files.
in the vast majority of cases, the user should use this new variable.
Change-Id: Icb57a1166f1896f51284c64e4047cfc79410e73a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
this is handled the same way as the QT variable, only that the actual
libraries end up in LIBS_PRIVATE, not LIBS, which means they don't end up
in prl files.
the handling of the two variables is entirely independent, including
independent dependency resolution, so some libraries will typically end
up twice on the linker command line. this is not a problem.
Change-Id: I257ad0d414bf273c08a7bd6a874fe9ddb7356009
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
this is in fact a shell-related flag, which determines how QMAKE_DIR_COPY
is assumed to behave.
Change-Id: If774f8a83b40c9ae7107c8e7ef7263af8a2e6c6e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
QT_PRIVATE is meant to be for something different.
only jsondb uses that so far. as it has little activity, i feel free to
break it temporarily.
Change-Id: Ifaa054af7234594ee534120c99506b76aebbf59f
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
QDBUSXML2CPP_{INTERFACES,ADAPTORS}_{HEADER,SOURCE}_FLAGS are now
understood.
Change-Id: I26492cec5ecb7ff4a6b83755ee8a0c17859b2a68
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
it's two times the same code, once with "adaptor" (and an -a option) and
once with "interface" (and a -p option).
the de-duplicated code looks a bit nasty, as qmake cannot deal with
braces on the LHS yet.
Change-Id: I199a07947661ab9abe7a736b56c437f3f6dc4fa4
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
So you can get AVX/NEON etc source compiled by assigning to the
corresponding variable (e.g. AVX_SOURCES).
This was previously used in just the gui module, but other
external modules might like it too.
Change-Id: I51aa64760c469c7dc4c71e6f089c2ddef4f509c5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
the system path separator and shell are bound to the host system
(system() will use cmd even on mingw with sh.exe in path).
the makefiles otoh may depend on what the qmakespec defines.
consequently, add $$system_path() and $$system_quote() (for use with
system() & $$system()). $$native_path() is renamed to $$shell_path() and
should be used with $$shell_quote() to produce command lines in
makefiles.
$$QMAKE_DIR_SEP needs to be applied to Option::dir_sep right after
parsing the spec, so it is available to $$shell_{path,quote}().
Change-Id: If3db4849e7f96068cf03a32348a24f3a72d6292c
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
It is expected to be well defined for the CMake files to be generated
correctly, but if that stops being the case, it should fail loudly. All
of the generated CMake packages are CI tested.
Change-Id: I67c7fa6ef1fe0a019c40936cb12db282669e9ee8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
It does not make a big difference, but it is what was intended
initially.
Change-Id: Idd7e06c857533030b000726ff87b48bb2619df06
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This includes a revert of 195df6e8e0
so that the solution scales better to other Qt modules, and other
logic related to 'internal' modules.
Change-Id: Ie4c1f10d20953aeb15438273081a810ab8bc9ec9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Even if we are building frameworks, we still build some static
libraries (eg QtUiTools). Static libraries are never in frameworks
so we need to ensure that we don't generate a path to a framework
in the CMake config file in that case.
Change-Id: I533e30874a653695cb0e262617e71bbd3d4c954b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
It should be possible to include both:
* <QtGui/private/qfoo.h>
* <private/qfoo.h>
Change-Id: I83ed5bba633b4a6b9bd38e315c987d78beecfb1b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
all other build artifacts go into qtbase's build directory anyway. this
asymmetry was confusing and causes cmake users some grief.
Change-Id: I4d7f7b2318f6c5300eb00360664785cb2c8217b7
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
now that all modules have migrated, this dead code can be removed.
Change-Id: I5e9c7dd3fb271346d1b5f0e2930874da3e4d2d57
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Handle the cases where the user does
./configure -debug
make
make install
make release
make release_install
Thereby making the installed configuration different to the
'configured' configuration.
Change-Id: Ib351d8a84c4333ebcbd305d68a37c16f86869559
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Brad King <brad.king@kitware.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
if() seems to behave differently with macro parameters compared to
variables set with set().
Change-Id: Ieb9544b8c3187579fd4cfe25e2c2afa3f349eba6
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
it's a tad insane to expect the user to do that
Change-Id: I75c68f2a28656c9ba2e3fabcc79718b899b29ce7
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
qmake always sets that variable, so unless somebody pro-actively screws
it up (which doesn't seem like being worth checking for), it will just
work.
Change-Id: I3c4ada47cbd34ac68695d8efbf09c605392616f5
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
now that all modules have migrated, dispose of the clutter.
Change-Id: Ib8937c1452536f645b76c0097b927df1108afc1a
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
qtAddModule() skips adding standard library paths to LIBS. however, as
processPrlFiles() didn't know anything about that, it would not find the
prl files of qt libraries in these paths.
so centralize the definition of these default paths (we should actually
ask the linker for them) and use it in both places.
do the same for the include paths for symmetry.
Change-Id: I7e3692dc2d1c2d0c97a9151d15887b1263de137a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
the import version is not supposed to determine the plugin version -
it's only used by the qmltypes target.
Change-Id: I0cb072cb0ee469bd96830262dbf4971a2bf3134f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
On windows this doesn't need to be set. On Mac I'm not sure yet on
the various configurations.
Change-Id: I31f191711a2ae0a1bb7221ae6e1fef377d62f1dc
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change-Id: Id3ae730c0ce0630f8ccc222fe09e5d3da23d124d
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
some tests have runtime deps on the other parts
Change-Id: Ieb2925e762e94b3c0b16884be0f59e10ce8e4878
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
we need to make cmd escape the expanded output, so it doesn't confuse
its own command line parsing (which happens later!).
Change-Id: I0c2c71d276c0aebe3c2163f7f08db8050a14d7ce
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
exists() resolves the path relative to qmake's current working
directory, which is mkspecs/features. Explicitly refer to the full
path.
Change-Id: I04e9f377528bffc1ebeeed69c86d73b85a117423
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
tools like idc and lrelease are outside qtbase/bin and depend on libraries
which are not in any search path, so we need some way to let the modules
announce the locations (qt_tool.prf) and use it (in qtPrepareTool()).
Change-Id: I98d5109cbee5e745d86dde94e3dc791d42edc3ec
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
a prefix build needs to be installed first anyway
Change-Id: I798861fddad2be289e9e4f182d0373e389b57437
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
On Mac the framework include paths were generated wrong.
The $${MODULE_NAME} was missing.
This patch fixes the framework include path generation.
Change-Id: Ic0e8d69ac7ac63be755302dc822c28240c9bc3d2
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This is used as a hint for the linker.
Change-Id: I869039c1ea50f1926809ead4064317628ebbb2e7
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Make test projects declare TEST_HELPER_INSTALLS rather than calling a
function exported by testcase.prf. load(testcase) may be unsafe, as
testcase.prf should be processed after default_post.prf.
Fixes silent disabling of various autotests.
Change-Id: I56b35ffd653a637ad5ab18d64dd1a1edadfac59f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Rationale:
QCC is a wrapper around GCC, but it doesn't understand -std,
so we need to pass it via -Wc.
The underlying GCC is v4.4, which doesn't know -std=c++11
yet, only c++0x.
We can't use -std=c++0x here, because the QNX headers
depend on some GNU extensions (nanosleep() was one that I
saw), so it has to be gnu++0x, ie. STD C++ + GNU extensions.
Change-Id: Ia5caf68f558b1638224e4876f1bbec84a0a93f67
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Don't hardcode the "qt_config" EXTRA variable and use QMAKE_PKGCONFIG_VARIABLES instead.
This allows qmake create the .pc files that are unrelated to Qt.
Change-Id: Ic72005e8819a15f6c50f3aaf79424a247fba20af
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This will allow tests of modules outside of qtbase to find their
CMake config files.
Change-Id: I68036908d0fd2ec640530b57d0f572d211ef44f0
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Use a command line argument instead of an environment variable.
Change-Id: I518b21d1fb9567d182384885a308c76e108598d8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
this meant that the common mkspec was unable to do 'sensible' things with the
cflags (hence -Wno-psabi not being applied to C++ code), and probably explains a
lot of other weird things.
Change-Id: I77079027dc1b2691c53212893eb90c7b935d00a2
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Should be be reintroduced with intent if there is sufficient interest, outside of the QWS context.
Change-Id: I598f47b5cf0c10dd66534294d0f27cf0b4e5069a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Using these requires setting two environment variables, e.g, for me:
export ANDROID_NDK_ROOT=/Users/burchr/android-ndk-r7c
export ANDROID_NDK_HOST=darwin-x86
./configure -opensource -confirm-license -xplatform unsupported/linux-android-armeabi-v7a-g++ -nomake examples -nomake demos -nomake tests -v
These mkspecs are somewhat based on the work of the Necessitas crew, kudos to
them for their work in getting the NDK integration into qmake.
Change-Id: I591e423ed8dc70616009f681c81890c696110e62
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
refactoring and cleanup. fixes x-builds between different os families.
Conflicts:
mkspecs/features/qt.prf
Change-Id: I0205e6f07f77c9b015cf055dd87a471883949a91
Up until now, we had a mess of different macros used for building
DLLs, for building shared libraries on Unix systems and for building
static libraries. Some of the macros were contradictory and did not
work. From now on, there shall be only:
- QT_STATIC: indicates that it's a static Qt build and the export
macros should expand to empty
- QT_SHARED: indicates that it's a shared / dynamic Qt build and the
export macros should expand to Q_DECL_EXPORT or Q_DECL_IMPORT,
depending on whether the macro corresponds to the current module
being built (the QT_BUILD_XXXX_LIB macro comes from the module's
.pro file)
QT_BOOTSTRAPPED implies QT_STATIC since the bootstrapped tools link
statically to some source code.
QT_STATIC is recorded in qconfig.h by configure when Qt is configured
for static builds. Nothing is recorded for a shared / dynamic build,
so QT_SHARED is implied if nothing is defined. This allows for the
existence of a static_and_shared build: with nothing recorded,
defining QT_STATIC before qglobal.h causes the export macros to be
that of the static form. Linking to the static libraries is out of the
scope of this change (something for the buildsystem and linker to
figure out).
From this commit on, the proper way of declaring the export macros for
a module called QtFoo is:
#ifndef QT_STATIC
# ifdef QT_BUILD_FOO_LIB
# define Q_FOO_EXPORT Q_DECL_EXPORT
# else
# define Q_FOO_EXPORT Q_DECL_IMPORT
# endif
#else
# define Q_FOO_EXPORT
#endif
The type of the Qt build is recorded in QT_CONFIG (in qconfig.pri) so
all Qt modules build by default the same type of library. The keywords
are "static" and "shared", used in both QT_CONFIG and CONFIG. The
previous keyword of "staticlib" is deprecated and should not be used.
Discussed-on: http://lists.qt-project.org/pipermail/development/2012-April/003172.html
Change-Id: I127896607794795b681c98d08467efd8af49bcf3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This will make it easier to handle cases where the Qt installation
and the build do not match exactly. For example, on Windows, it
would be possible to do:
./configure -debug
make
make install
make release
make release_install
In which case, both debug and release libraries would be installed
even though it was only configured with -debug. On non-Windows, the
debug and release libraries would overwrite each other, so it is
not necessary to support it.
Similarly, we want to handle cases in the future where (on
non-Windows) both static and shared libraries would be
installed (again, not described with a single build configuration).
Change-Id: Ib7916c9664a0f72e40156a03bdfc79a4a6c24350
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
abuses have been observed in the wild, so make sure these variables are
not available.
Change-Id: I502c3f5db7d341cf6a8bd2ec09e87f129da2fca6
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
this is cleaner by design and allows removing some hacks.
Change-Id: I3270195b5d62caa476ffde7c1e1ef43cec99c565
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
the spec does that itself, given that the real spec is just included
nowadays, instead of copied (which never worked without side effects).
Change-Id: Ibf655b9a943dadb949d3c7a58d8fe50fcd62cef7
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
doesn't make much of a difference on unix (as the default specs are just
symlinks).
on windows, it makes the gross hack used for finding spec-specific wince
default_post.prfs unnecessary.
Change-Id: Id403dce5be487e1ae22c1f54b8095a6afdd98bc8
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the project evaluator becomes oblivious of the target mode.
the mode is set up in spec_post.prf according to the spec.
$$QMAKE_TARGET contains the feature suffixes to search, and is also
contained in $$CONFIG.
the target_mode variable itself becomes private to the Makefile class.
Change-Id: I3c06d9dab536b753343cec6c5c491d3203e50bd8
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Commit 8b822825c5 introduced the
/get version but used the wrong variable name. Fix it by using
QT_HOST_DATA.
Change-Id: Ia4759b8c6ff2de9726f3aebae2f2f39c6644d4ec
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
autotests often need private headers (especially with qpa headers now
being private) and have no compatibility requirements, so it makes sense
to just use the privates of requested modules.
this also suppresses the useless warning about using privates, in case
they are still explicitly specified.
Change-Id: I9e499bedcf6ef25777283ff1432cef7254e9093a
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
This makes it easy to add cmake module tests for all modules.
Change-Id: I303bf7674ca6ae7a8544488f96e8e02afbaa6ff0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Rely on the DESTDIR variable being set correctly by qt_module_config.
Change-Id: I1a166124024722ec5a189a7402b38646179aa890
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
As the DEFINITIONS to be used for QtAddOns is different to essential
modules, rely on the logic in qt_module_config setting this variable
correctly.
Change-Id: I64485ccd6df093216cac4a97fb1cfaac0122a218
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
quick1 got a suffix, so we need a way to set it
Change-Id: I099b868106abd4d3040047703472faa65f694f31
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Update Raspberry-Pi mkspec to indicate that wayland is the default platform
for the Raspberry-Pi.
Change-Id: I10b30ecfb16faed6027137225d9e95409faa7e87
Reviewed-by: Johannes Zellner <johannes.zellner@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Use these mkspecs to switch to the new libc++ C++ runtime library, which
in turn makes it possible to enable C++11 support with clang.
Change-Id: If92908592f8bee4829a1bad747fe396f527d26c7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
instead of making the "real" targets depend on the makefiles, add
conditional makefile generation to the targets themselves.
this causes makefile generation to follow the recursion order determined
by the project, which is important when dealing with prl and module pri
files.
a side effect of this is that qmake and make calls are interleaved now,
which is entirely different from a 'qmake -r' run.
on the downside, calling make with multiple targets which operate on the
same subprojects without prior makefile generation will make a mess, as
the qmake calls will be racing. this should be no problem, as qmake does
not generate recursive targets where this would be useful - at least by
default.
it is not sufficient to just order the creation of the makefiles
non-recursively (e.g., by using gnu-specific order-only-prerequisites),
as an interrupted and subsequently resumed build would happily skip the
nested makefiles.
workable alternative approaches would be walking the entire tree in a
pre-pass to ensure makefile presence (which is incredibly slow) or
creating additional stamp files only after recursing and having the
makefiles depend on them (which is ugly).
Task-number: QTBUG-23376
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Change-Id: I88d3e7610215677d362026de316513d3bea04b06
if a module's private headers add additional dependencies, QT_PRIVATE is
now the place to declare them. note however, that this may not contain
other private headers in turn - that would be much harder to implement,
and we want the explicitness anyway.
Change-Id: Ic516fcf1a003c95798df4fbe216f92016afaf47e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
instead of hard-coding platform differences, use a variable.
Change-Id: I20e98811ad5f07429148c6f88aedbabc3ba58fff
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
there are only two types. everything else is duplication.
Change-Id: I87f2bdd3d56b94bb2ecdb60e8861afeb9af3666f
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
everything in the projects should be normalized. only the makefile
generators need to adjust it to the native form.
Change-Id: I06a4e997f32134d13949ec4a9dd1b44367aab7cb
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
this is a qt tool, so it needs appropriate treatment
Change-Id: I0cb30ba07e03c72ee275cd916ca0a39a99fc3705
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
the last read file wins, so reading in inverse order ensures that we
respect the list's sorting by decreasing priority.
Change-Id: I2e6539a52d4195ed6af4c0143b035c39577b8310
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
that way qmake is made aware of the forwarding pris which are generated
for this module even when a top-level .qmake.cache prevents the module's
root from being found automatically.
the path is also added to the cache, so that subsequent partial
qmake-ing of the tree will still find the module.
this also makes the -cache-module-fwd parameter of syncqt useless, so
remove it.
Change-Id: I2afbc52a465c0b3260e9bcaf032c43a82ae8061f
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the latter allows sub-projects to dynamically extend the qmake search path
specifically for modules. the others are just for congruency with
QMAKEPATH and QMAKEFEATURES.
Change-Id: I0c099035f8dc8ee8645566dbc635644a15ed9da5
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this has the advantage that the %mastercontent assignments in sync.profile
are not necessary any more. as it happens, most modules got them wrong
anyway.
Change-Id: Ibdf689be408f18e1d90c44ef4ecacd7c24b1f1c9
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
each qt module comes properly declared and located, so there is simply
no point in performing a search.
Change-Id: I86fad21bb8e128b85f1000cc116cc44a23642eb4
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this will allow us to not rely on the modules matching the global
qt_framework setting.
Change-Id: Ic1dce757ff63d06af54a2428e23a1bbcf1c81ba1
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
there won't be terribly many projects relying on it. now's the time to
find out for sure ...
this reverts commit 3279b07302fde0eb14f9b197c9ad2e14d512817e
Change-Id: Id36687ab3bfc7dd5ce35b584621a8f5b3ee00fc9
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this only needs to be set in one module each - the one which provides
the relevant tool.
this is moderately source-incompatible, in that a package which queries
a given variable from the wrong library won't get the path it looks for
any more. as it's likely that everyone was using QtCore as a reference
anyway, this will only affect uic - which is in the new QtWidgets
library, to which people need to adjust anyway.
Change-Id: If05d3c33fda6cd12466e261391b825c59651d3e4
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
that way we can theoretically support modules outside $QTDIR.
also, it's just cleaner.
Change-Id: I6139ebc7328b64ace8552b3e54f9a8c69248ceec
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
don't prepend the paths, as this will only mess up building of
subsequent modules (e.g., building qtdeclarative against an installed
qtbase would pick up the headers from the qtdeclarative previously
installed into the same directory as qtbase).
for frameworks this was a rather pointless exercise in the first place,
as their headers are properly isolated anyway.
however, make sure that we don't add system locations to the search
paths, as this is a) unnecessary and b) messes up subsequent libraries
in non-standard locations which want to shadow versions in standard
locations (pkg-config .pc files which add standard paths are considered
broken as well).
Change-Id: Ie1dc65d4767e98e1df6e49012505141935a6c704
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this fully replaces qtmodule-configtests.
it is way shorter and it actually integrates reasonably with qmake.
Change-Id: I819cc6807ad3661c419b54fa253894936dd88a64
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this doesn't make too much sense as such, but the file will grow.
Change-Id: Iceaecdc24f83b3dafb40c8d2f1b6cddafa2d70a1
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the location is determined by syncqt rather precisely. no need to
reverse-engineer config files.
$$HEADERS_PRI doesn't seem used anywhere, so don't set it as a side
effect.
Change-Id: I54a63356c350c0ddae4c880bf374fcd127282429
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the forwarding pri is loaded even if it was still created by syncqt, so a
top-level qmake -r will still catch it even in the future.
Change-Id: I2e4b556cd06eb88be9ee378662a2e6e1bff67ad7
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
there is no point in adding Qt modules to SUBDIRS projects.
as QT contains core and gui by default, the operations are relatively
expensive, so skip them when they are unneeded.
Change-Id: Ibe6447ff452e403cb040fabe245d248edbda0eaa
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the check whether we are building a lib or an app (and thus have a target)
is done by quite some feature files (and generally wrongly, as they do not
account for the new aux target), so centralize it in default_post.prf.
Change-Id: I868edbc4185be8a6c23ecd4a2c126024d73cdeb4
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the declarative module is a fake, so there is no library to install.
Change-Id: I0dcd39f3304e38adce9ea34e2268905525abd3d5
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the qt version is always set.
otoh, we need to allow the module to override the own version.
Change-Id: Ic3eb7dae59a5fb011cede09151553b652a0a1d78
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
qrc_ files are generally not meant to be included, so there is not much
point in doing this.
qprintsupport was a notable exception - which broke on mac and thus
needed a hack. just remove the qrc_ inclusion.
Change-Id: If5115665f331a280869e800673bf7b81d3ab559a
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this is needed by webkit's creative directory layout.
Change-Id: I2317162c11696d2820423d63563b10d3024a6cb6
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this makes qmake find them automatically now.
consequently, also do not write QMAKE_EXTRA_MODULE_FORWARDS to
.qmake.cache. still write the cache file, though, as otherwise a
top-level cache would mess up the module root detection.
Change-Id: I998b94fcc73ca3f8bf1af09a394ff8d40cf1fb76
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
a variable name should not reflect the tool which uses it, but its
purpose - especially, as the scope will be extended soon.
this variable is used by webkit, which has a somewhat creative directory
layout.
Change-Id: Id3d3fad6ed9395cb967aeabc79e47a0ba17f5423
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
absorb module.prf into qt_installs.prf, as that's where it belongs.
add qt_install_module option and automatically set it in
qt_module_config. make qt_installs use that option.
Change-Id: I860616f3a29a456f7b88ddaffa09375400c8911e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
it's used by people (in particular, qt creator), so it would be not nice
to just delete it entirely.
Change-Id: I6bd849d00ebfe3b9b126e01a6d1c6e7c6584d8ac
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
they are equivalent to QT_INSTALL_(HEADERS|LIBS)/get.
Change-Id: Ic4b47f3ca7db55785b96f19020a2fa020a8d25bd
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the qtbase install dir being a build dir is a necessary and sufficient
condition for detecting a developer build.
Change-Id: I3d98c789ac6fbe570980459edabb9a941bf1e5d6
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
instead, always pass -qtdir (which, btw, is a slight misnomer - it
should be -qtdatadir) with the correct path. this centralizes the
relevant logic in default_pre.prf.
Change-Id: Icc788d3f3e5f7b68b444e63e181efdea3b4ef160
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
this cleans up a lot of hacks supporting the build of qt, including the
last bits of $QTDIR.
Change-Id: Id119886ed8097967dad6cf86ebd4e71d90c42841
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
qt is built with depend_includepath anyway
Change-Id: I3967ad0bb52f5a3d88fceaf102c79f6711aaa83a
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
specifically, qtestlib.prf, qdbus.prf, help.prf, designer.prf and
quitools.prf - they have been obsoleted by modularization.
add noisy backwards compat hack to qt.prf.
Change-Id: I26f84fdd51798265471e20dd1f40efec59b1087e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
... and followup fixes.
this is not needed any more due to the breaking patch being reverted.
Change-Id: Ia3416fcc16ddece680efbd0322286a601879fa0a
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
The fbdev fallback code now resides in the default implemenatation of
the hooks.
Change-Id: Id3d2cd23ab826b90c0e6d442bfb222aa8c291646
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
This solved QTBUG-26111 in which qtjsbackend gets built with an
incomplete framework on Mac OSX. This was traced back to commit
6a6fd56e66 which moved QMAKE_CONFIG
values from .qmake.cache to mkspecs/qmodule.pri. Since qtjsbackend
contains config tests it creates its own .qmake.cache which was
previously masking this issue.
QMAKE_CONFIG incorrectly contained debug for debug_and_release builds
even though debug and release are already present in the CONFIG variable
in mkspecs/qconfig.pri. The changes to configure prevent CONFIG in
qmodule.pri from containing debug and release variables and ensure
that QT_CONFIG contains build_all and debug_and_release if appropriate.
Configure.app is also adjusted to match this behaviour.
The other part of the change is to qt_module_config.prf and
qt_plugin.prf. These changes take care of populating CONFIG with
the appropriate debug_and_release and build_all variables depending
upon what is present in QT_CONFIG. This ensures that the Qt modules
and plugins get built with the same configuration as qtbase.
The special handling for the qcocoa QPA plugin ensures that it is
built in release mode only to preserve the behaviour introduced by
commit 5603f94eaa.
Task-number: QTBUG-26111
Change-Id: I6f65aba50709e1b2431b8b4411ff30a06f7d8aed
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The QNX toolchain can use Neon on ARM and SSE<X> on x86/x86_64.
Change-Id: I36c61fa12b65d806b3cc60a0aefcb63964f9ab7e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The current cursor implementation can be a bit hard to read
without hints about which methods are overriden.
Change-Id: I3376890a13be46e1ece03d1442dd5a15ccd61382
Reviewed-by: Johannes Zellner <johannes.zellner@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since local thread storage is used we need to turn this on for the xlc
compiler with the -qtls flag.
Change-Id: Ib40ec87edada56a062b0c72b7d47b38a6d0b5b13
Reviewed-by: Teemu Katajisto <teemu.katajisto@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Follow-up to 6a51062e99 which did this
for win32-g++.
Change-Id: I3ba0dd8ffca46853844b55b16dc92270fa8a623a
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The OpenmaxIL video_render component uses the dispmanx layer 0, so EGLFS
should use at least z index 1. Otherwise the video_render would conflict
with the UI and thus overpaints it.
Change-Id: I3bed23567fa8c4399207289c6ef952c5a5e0d503
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Donald Carr <donald.carr@nokia.com>
See https://github.com/raspberrypi/firmware/pull/32 for more information.
Change-Id: I51bb532336ed069cde938540cd962721b1a72adb
Reviewed-by: Johannes Zellner <johannes.zellner@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
This allows us to have different flags for the compilers for
supporting the same feature. For example, the official flag in GCC to
support AVX2 is -mavx2, but ICC does not support it (yet), requiring
-march=core-avx2 or -xCORE-AVX2. That flag, instead, enables support
for all the features that the "Core-AVX2" processor (codename Haswell)
will support. And clearly, the MSVC flags are different.
Change-Id: I33b6d8617520925e807747180a8dbaafd79b7a9a
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This way the target will be created and have its properties
populated only one time.
I tried wrapping the whole file in an 'include guard', but that
broke the unit test in tests/auto/cmake/pass1 (and
the qt5_use_module function), because the function causes the
variables in the Config file to not exist outside of the
scope (eg for include directories), and yet, Qt5${Module}_FOUND is
still true even when the find_package was previously called in a
function, so it is not found and processed again.
The change in Qt5CoreConfigExtras.cmake does not need to be guarded
as it is only ever included from Qt5CoreConfig.
Change-Id: Iaa016563db5eb61294360ac9e003c9c923393d8c
Reviewed-by: Brad King <brad.king@kitware.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This fixes breakage in the Raspberry Pi spec introduced in:
https://codereview.qt-project.org/#change,27536
due to incorrect depth assumptions regarding included files.
Change-Id: I802b828f1755f299939fed192dd3ca9bf1a83002
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Enabling support for C++11 adds CONFIG+=c++11 to the Qt build. Projects
using Qt can check for C++11 support using contains(QT_CONFIG, c++11) in
their .pr[iof] files.
The QMAKE_CXXFLAGS_CXX11 and QMAKE_LFLAGS_CXX11 qmake varibles contain
any arguments the compiler needs to enable C++11. CONFIG+=c++11 adds
these arguments to the build.
Support for clang, g++, and the Intel C++ Compiler for Linux are
included in this commit.
Change-Id: Id77f86d7ad4d5c740b890446a40b105879a0d327
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The cursor is rendered on a dispmanx layer and moved
around. This approach saves us from having to update the
underlying window each time the cursor moves.
Dispmanx layers cannot be moved to negative coords. As
a result, currently it is not possible to move to a
location less than the hostpot. A future commit will
fix this problem.
Change-Id: Ida5ee961d03a6929860c515e503482756a4913ed
Reviewed-by: Johannes Zellner <johannes.zellner@nokia.com>
Reviewed-by: Andy Nichols <andy.nichols@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
There is no session management currently implemented for the xcb QPA
backend. Update the build system to reflect this.
Change-Id: I3486de5741f1fb7e09330ca142b8235a84d3b91d
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Instead of saving the ability of the compiler to produce SSE2, AVX,
Neon, etc. code in .qmake.cache (Unix) or qconfig.pri (Windows), move
everything to qmodule.pri. Accordingly, move the DEFINES += settings
to qt_module.prf instead of qt.prf.
This allows us to re-use these settings in other Qt modules (other
than qtbase), if necessary. Though currently the extra compiler
definitions are found only in src/gui/gui.pro. They can be moved
elsewhere when it becomes necessary.
As a side-effect of this change, some other flags are moved from
.qmake.cache to qmodule.pri (on Unix). The flags that are getting
moved should probably be moved anyway.
Change-Id: Ibc3ab0111e148d81870772f9357273660aa93417
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The QT_HAVE_xxx macros are replaced with QT_COMPILER_SUPPORTS_xxx.
They indicate that the compiler supports those intrinsics, but not
necessarily that they can be used right now.
ICC and MSVC allow one to use the intrinsics anywhere, but for Qt all
uses of the intrinsics are either in specially-built files, protected
by runtime checks, or they are unconditional (qstring.cpp). So we only
use the intrinsics when the compiler was instructed to generate code
for that instruction set anyway.
Change-Id: Ie58eebbc0518ad1d5420a85174fd84153bb9abaa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
- Add QWindowsEGLContext usable for ANGLE and Windows CE.
- Add QWindowsEGLStaticContext containing the display
for resource cleanup.
- Add EGLSurface to QWindowsWindow.
- Add a -angle option specifying the path to the external
ANGLE installation to configure, add libraries to
the mkspecs.
Initial-patch-by: Jabot Corentin <corentinjabot@gmail.com>
Task-number: QTBUG-24207
Change-Id: I5f80b1efb6996da7c5d70aa3720f7801c9e4c6af
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Remove the check from ST7540 and PNX8473 specs since
it's already checked in deviceSanityCheckCompiler
Change-Id: I2accb12f9e692e253f76194ca68b1f4cc673a833
Reviewed-by: Johannes Zellner <johannes.zellner@nokia.com>
Reviewed-by: Donald Carr <donald.carr@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
directfbegl requires libQtPlatformSupport to provide some EGL
helper functions. Enable EGL by adding it to the QT_CONFIG variable
in the qmake.conf.
Change-Id: I80d3163d9da4b9eb232aea72ba7d4388453f8247
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Re-enable checking if the compiler is in the path. The previous
commit dealt with a user/spec author not setting CROSS_COMPILE and
then picking up the host g++. Re-add the 'which' check, but put it
after the sanity check for the CROSS_COMPILE variable. This check
assumes that QMAKE_CXX is of the form "${CROSS_COMPILE}g++".
Change-Id: I54f7e058a75d26d73eca5a860946a6854ce91d67
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
QMAKE_CXX is initialized by default to gcc. As a result,
'which $QMAKE_CXX' always succeeds.
This change removes the 'which' check and makes it explicit
that CROSS_COMPILE is a mandatory option to -device mkspecs.
Change-Id: Icefa9d14fc24086a60c9108ff7d9d16fd9990995
Done-with: Johannes Zellner
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Change-Id: Iec687e9cd015ed389a637b50e4e4e332478b6e1f
Reviewed-by: Donald Carr <donald.carr@nokia.com>
Reviewed-by: Andy Nichols <andy.nichols@nokia.com>
Introduce platform libs hook to handle/allow device specific initialization and the associated symbol resolution
Change-Id: I098b07dcb581390d369d9165c6cedc7ace1e088a
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
-O2 is already the default optimization level for release builds,
as defined in gcc-base.conf. In addition, it shouldn't be set for
debug builds.
Change-Id: Idd7406b0d135d9579676b389050fd6e5776e722c
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Compiler flags like CPU architecture and FPU should be set on
QMAKE_CFLAGS instead of QMAKE_CFLAGS_RELEASE, as the latter only
applies to release builds
Change-Id: I2e729a9e413934e904fc2810394e118940b8557f
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
This significantly reduces the size of the generated code
in places where we don't need exceptions.
The -(no-)exceptions configure flag has been removed in the
process, as there is now a fine grained way to control this
on a per module level, and Qt is being compiled without
exceptions in most places.
Change-Id: I99a15c5d03339db1fbffd4987935d0d671cdbc32
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This adds the Visual Studio 11 mkspec
and the corresponding changes to configure
and qmake makesystem.
Change-Id: I3a7e82a6f7f90aa0a94dedd493ebaa66bf100923
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This is required if Qt is installed into a directory with spaces.
Change-Id: I1d6874265558d712ac98a3aef670c2934a632ab1
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>