On low-end hardware without fast framebuffer clears one can
significantly reduce the fill rate by disabling framebuffer clears
(provided, as it's usually the case, that the application has content
filling the entire framebuffer).
Add a couple of environment variables to do so, one to disable all
clears and one to disable only color clears (in case the surface is
requested without a depth buffer). Note that disabling all clears
on a surface *with* a depth buffer still requires
QSG_NO_DEPTH_BUFFER to be set, otherwise QtQuick is going to assume
that there is a clean usable depth buffer.
Change-Id: I96ad0a3d28dd0ab65cc960fb7cb2e0a8b6f35628
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Accidentally broken in 4b899a29fa
Change-Id: I8ff52153c3549fcda4ebd178cc4fc1ea9538be86
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Elvis Lee <kwangwoong.lee@lge.com>
I forgot
Fixes: QTBUG-97409
Change-Id: I5ee94b2cc4c70b6408bb9bb9368c6876f3179783
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
- when there is no intersection between the current selection and the
spans collection, get ranges for all cells, just as if no span exists
- when there is an intersection between the current selection and the
spans collection, get separate ranges for each cell (as before)
This fixes the regular case of selecting multiple non-spanned cells
after some cells are merged (get a single range for all cells instead of
separate range for each cell). However, when selecting together a group
of spanned and non-spanned cells, you still get a separate range for
each cell. But this is normal behavior in similar applications; for
example in LibreOffice, you cannot select and merge spanned and
non-spanned cells: an error dialog tells you that it's not allowed.
Done-with: Christos Kokkinidis
Pick-to: 6.2
Fixes: QTBUG-255
Change-Id: Ic38f9a064a1f499825e7f750668013fc2dc564ba
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Add operators as hidden friends, add test case to make sure that
basic value-type operations are possible with this type.
Task-number: QTBUG-255
Change-Id: I7fbf453aa16084c0b2a0079487cacb4e092ff664
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Less clunky due to having better constexpr support, plus fold
expressions.
Change-Id: I3eb1bd30e0124f89a052fffd16a6bc73ba79ec19
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
It's not used anywhere. It's been a legacy since 5.0 anyway.
Pick-to: 6.2
Change-Id: I2bbf422288924c198645fffd16a9740444c7f13b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
They return a pointer to the actual header, skipping the magic string.
This is done in preparation for the header located in an ELF note, which
won't have the magic.
Change-Id: I3eb1bd30e0124f89a052fffd16a8229bec2ad588
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The .qtmetadata section is already suppressed for static plugins, but we
carried this unnecessary magic string. For library file formats where we
don't have a scanner (Windows COFF PE), a library that linked multiple
static plugins could end up with multiple metadata found.
We can't suppress the header because the version of moc could be
different to the version of Qt, so we need to read the header version
too. Right now, the version isn't output by moc (all the logic is in
qplugin.h), but this could change again in the future. In any case, 4
extra bytes are not a big deal, so the header stays.
Change-Id: I3eb1bd30e0124f89a052fffd16a82088d8303081
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The .pri files for public Qt modules were missing run_depends entries.
Those entries are used by qmake when linking plugins of a static Qt
build. In shared builds, run_depends entries are used to decide whether
to add the -rpath-link argument to the linker. In that matter,
run_depends entries serve a similar purpose as CMake's
IMPORTED_LINK_DEPENDENT_LIBRARIES.
In Qt5, run_depends entries consist of the qmake values QT_PRIVATE and
QT_FOR_PRIVATE.
QT_PRIVATE contains the Qt modules that are privately linked to the
public module, and QT_FOR_PRIVATE are the dependencies of the private
module. That loosely translates to LINK_LIBRARIES of the public module
and INTERFACE_LINK_LIBRARIES of the private module.
Private modules whose public counterparts are already public
dependencies don't have to be added to run_depends.
Pick-to: 6.2
Fixes: QTBUG-84310
Change-Id: If7025c98ea462a2d5a143202df3d98d88e4fee08
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Looks like it was copied from QUtf16::convertFromUnicode(), but for the
UTF-32 case that is not correct. UTF-16 to UTF-32 conversions can change
the length of the string due to surrogates.
There are unit test tests for creating and parsing UTF-32 headers, and
for detecting content as UTF-32, but there aren't any for UTF-32
conversions. I don't have time to add a full test for that.
Fixes: QTBUG-97122
Pick-to: 6.2 6.1
Change-Id: Ic17a33f599b844d8ab5dfffd16ab2c4cb6b0547d
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This allows Qt Quick Controls to detect if a dark theme is in use,
and if so, use a dark theme of the current style (if available).
Fixes: QTBUG-93955
Pick-to: 6.2
Change-Id: I15fc8a2271acf9ba27232359056d5a681d4cffca
Reviewed-by: Dmitry Shachnev <mitya57@gmail.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Leaving it set to 0 will cause mktime() to interpret other fields as
in standard time, potentially "correcting" them and tm_isdst to
represent the equivalent moment in daylight-saving time. Set it to -1
to tell mktime() to let the system work out whether the time is
standard or daylight-saving.
Change-Id: Id33d4cb0afdb14f236ca5ce04cf605610a30d712
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's available on MinGW, so not limited to MSVC; and the MinGW
localtime() and localtime_r() fail in some cases where it works.
Use the generic name rather than _localtime64_s(), since localtime_s()
now just calls it; and, in any case, we were assuming time_t is
__time64_t when calling it.
Change-Id: I316cc5b1a3e19cd6725555042dfaba3124a25a03
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The skip-reason only cites Qt/X11. Convert the #ifdef into a platform
name check instead. The test also fails with the offscreen plugin, so
skip it for that as well.
Pick-to: 6.2
Change-Id: I49607b89f4b32359e81e1d9aadff2c3e03035c53
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QDialog overrides setVisible to set focus on the default push button, or
(if there is no such button), make the first autoDefault push button the
default button. QDialog also explicitly sends a FocusIn event to the
focus widget in the dialog.
All this should not be done if the dialog does not become active after
getting shown, which will be prevented if the WA_ShowWithoutActivating
attribute is set.
Add a test case.
Fixes: QTBUG-8857
Pick-to: 6.2
Change-Id: If47021a4721a280ba45e95b43d0424cdacd9b4ea
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The need for this union has disappeared at some point during refactoring
It does confuse MemorySanitizer, though, so it's good to remove it.
Change-Id: I5f5050adba302bf96db96d5f303d2a25630543ce
Fixes: QTBUG-97109
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For a widget that implements height-for-width, the vertical scrollbar
becoming visible might be just enough to make the scrollbar unnecessary.
In that situation, the scrollbar flips on and off continuously.
To avoid that situation, make the width of the widget smaller until the
height fits without scrollbar, up to the point where we have space for
the scrollbar anyway.
The calcuation here is assumed to be cheap, but depends on the
heightForWidth implementation in the widget. Running the while-loop a
few dozen times should have no performance impact during resizing
and laying out the scroll area contents.
Add a test that confirms that within a brief period of time we only get
the one hide-event we expect.
Done-with: Zou Ya <zouya@uniontech.com>
Fixes: QTBUG-92958
Pick-to: 6.2 5.15
Change-Id: I0faeb5f9b1a226aada958c18333d9c2ac8203dd1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Previously, when deciding where the actual data is, Frame was calling
padding() to test if offset is needed. A curious case with a DATA frame
containing compressed body and having 'PADDED' flag set with a padding
equal to ... 0, ended in a decompression error (and assert in 6.2 code).
Pick-to: 6.2 5.15
Fixes: QTBUG-97179
Change-Id: I9341a4d68510aa4c26f4972afdcd09a530d5a367
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
When setCurrentIndex is called by removeTab, the old current index
might no longer be valid. Only update the lastTab value of the new
current tab if the old current index is still valid.
As a drive-by, use the validIndex helper function.
Fixes: QTBUG-94352
Pick-to: 6.2
Change-Id: I945e2093a90a1fccbba86d32b1113f83fedd41de
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This simplifies the code. While at it, also expand default case
so changes in the QChar::Direction enum don't go unnoticed.
Change-Id: Id52140b0aaf7fd259c4b8079462811603eb3ff93
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since commit f3c7d22dd0 we do not use
libraries from /usr/local and other non-system locations on macOS. But
our configure tests still did. This led to discrepancies between
find_package calls in configure tests and the Qt project itself.
Mentioned commit removed /usr/local and friends from
CMAKE_SYSTEM_PREFIX_PATH. But we can't pass this variable to the
configure tests, because CMake sets it up and overwrites our value.
Pass CMAKE_SYSTEM_PREFIX_PATH and CMAKE_SYSTEM_FRAMEWORK_PATH as
QT_CONFIGURE_TEST_CMAKE_SYSTEM_{PREFIX|FRAMEWORK}_PATH variables to
tests.
Tests with separate project files that call find_package() must add code
like this after the project() command:
if(DEFINED QT_CONFIGURE_TEST_CMAKE_SYSTEM_PREFIX_PATH)
set(CMAKE_SYSTEM_PREFIX_PATH
"${QT_CONFIGURE_TEST_CMAKE_SYSTEM_PREFIX_PATH}")
endif()
if(DEFINED QT_CONFIGURE_TEST_CMAKE_SYSTEM_FRAMEWORK_PATH)
set(CMAKE_SYSTEM_FRAMEWORK_PATH
"${QT_CONFIGURE_TEST_CMAKE_SYSTEM_FRAMEWORK_PATH}")
endif()
Adjust pro2cmake accordingly.
Task-number: QTBUG-97076
Change-Id: Iac1622768d1200e6ea63be569eef12b7eada6c76
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
No need to reinevent the wheel. Also, use nanoseconds
now that we have the precision available.
Change-Id: I287d06198edc3f5bdf7f85bd5f3e235b1fea95a3
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Unify cancel and finish in QPromise destructor in a single call. This
saves us one extra mutex lock and atomic state change.
Task-number: QTBUG-84977
Change-Id: Iac06302c39a2863008b27325fcf6792d4f58c8ae
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Change-Id: I5d66a67a5c16a479f62b9f43cb769d5ee5f66b60
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When passing an absolute input file name to qlalr, the #line directives
in the output will contain absolute paths. For reproducible builds,
it's desirable to have relative paths.
Pass the input file as relative path to qlalr to produce relative #line
directives.
Fixes: QTBUG-96267
Change-Id: I4ef1e4d5be7cbaf25a54a34ab7c2dbec06411a1d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
