When a menu item's enabled state changes after
-[QCocoaMenuDelegate menuWillOpen:] is invoked, i.e.,
during or after QMenu::aboutToShow() is emitted, that
state change may not be taken into account. This is
because the automatic menu validation, upon which Qt
relies, is not made aware of any such change.
By calling -[NSMenu update] when syncing the QPA menu
item, we induce Cocoa to invoke -[QCocoaMenuDelegate
validateMenuItem:] and ensure that previously synced
items, whose state may have changed, will be properly
updated. This, however, has a small side effect, namely
that menu-holding items will also go through the automatic
menu enabling path and may appear disabled since, until
now, they were not properly configured. In order to solve
this, we set the action on those items as well, and make
sure that both of QCocoaMenuDelegate's relevant methods,
validateMenuItem: and itemFired:, properly process
menu-holding items.
Menurama manual test updated accordingly.
Change-Id: I62f955538b8be09b8494ea0ce87fca7910148d38
Task-number: QTBUG-56850
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The existing cursor logic had a couple of issues:
- It made the faulty assumption that we could not use
the NSWindow invalidateCursorRectsForView API for
child NSViews.
- It used NSWindow invalidateCursorRectsForView and
NSView resetCursorRects. This API has been replaced
by the more general NSTrackingArea API.
- It did not implement falling back to the parent
window cursor if the current window has no cursor
set.
Document that QWindow cursors work the same way as
QWidget cursors in that a QWindow with no set cursor
will fall back to the parent window cursor.
Change the cocoa platform code to use NSTrackingArea
exclusively and implement NSView cursorUpdate which
sets the cursor. Handle immediate change on QWindow::
setCursor() manually.
Add QWindow::effectiveWindowCursor() and
applyEffectiveWindowCursor() which finds the correct
window cursor.
Add a manual test for the child window, child widget,
and QWidget::createWindowChild cases.
Task-number: QTBUG-33479
Task-number: QTBUG-52023
Change-Id: I0370e11bbadb2da95e8632e61be6228ec2cd5e9d
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Commit c5db8fc74 changed all instances of Q_WS_FOO to have the prefix
Q_DEAD_CODE_FROM_QT4 instead, to make it clearer when reading the code
that the code in question was a left-over from Qt4, when we used
Q_WS_ defines instead of Q_OS_ defines.
This worked well for cases of #ifdef Q_DEAD_CODE_FROM_QT4, but less so
for cases of #ifndef Q_DEAD_CODE_FROM_QT4, where the code was actually
unconditionally included.
To make this even clearer, the defines have been replaced by checks for
1 or 0, with a comment describing how the code used to look in Qt4. The
use of constants in the check also makes it easier for editors to parse
the condition and show visually that the code is defined out.
Change-Id: I152070d87334df7259b417cd5e17d7b7950379b7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This leaves a clearer separation between the foreign-window and non-foreign
window use-cases, where a single QCococaWindow can only be in one mode,
which is determined in the constructor and doesn't change after that.
There are no source or binary compatibility guarantees for the QPA classes,
meaning the helper function in QPlatformNativeInterface can be removed.
Change-Id: I3232aedca1d98c49a8f54e16750832187f9dc69a
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
QSysInfo::WinVersion, QSysInfo::WindowsVersion,
QSysInfo::windowsVersion(), QSysInfo::MacVersion,
QSysInfo::MacintoshVersion, and QSysInfo::macVersion() are now
deprecated.
QOperatingSystemVersion exists as a more flexible replacement.
Change-Id: Ib97d1bfb260f2595ba3c06ff8fd251c5de41cedc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Allows us to detect cases where the requested vsync combination was
not possible to fulfill.
Change-Id: Ie8f3665129f7a1ab7fcefb94b2298d54520b753a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The FPS is now calculated and output on the command line in a single
place. The animated fps counter has been replaced with a vertical line
which should make it easier to observe tearing issues when vsync is
disabled.
Change-Id: Id356fc1958c048d85aba48edfed59124454038d4
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The animated FPS counter should be enough to observe smooth animations,
so we use the color of the window to visualize frame latency.
Change-Id: I1171a1c4bdc261ca8655771290c6735357821781
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
[ChangeLog][QtCore][QStorageInfo] Added QStorageInfo::subvolume(), which
returns the name of the subvolume of a volume that was mounted, if one
was detected. This is currently implemented only for btrfs on Linux.
Change-Id: Ib57b52598e2f452985e9fffd1459f3145d733ce5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
cf53aa21bf and 3aaa5d6b32
were reverted because of reconstruction in 5.7.
defineTest(qtConfTest_checkCompiler) in configure.pri is smart
enough to cover the case in a9474d1260.
DirectWrite: Fix advances being scaled to 0
Since 131eee5cd, the stretch of a font can be 0, meaning
"whatever the font provides". In combination with ec7fee96,
this would cause advances in the DirectWrite engine to be scaled to
0, causing the QRawFont test to fail.
Conflicts:
configure
mkspecs/features/uikit/device_destinations.sh
mkspecs/features/uikit/xcodebuild.mk
src/corelib/global/qglobal.cpp
src/corelib/global/qnamespace.qdoc
src/plugins/platforms/cocoa/qcocoamenuitem.h
src/plugins/platforms/windows/qwindowsservices.cpp
src/plugins/platformthemes/gtk3/qgtk3dialoghelpers.cpp
src/plugins/platforms/windows/qwindowsfontenginedirectwrite.cpp
src/widgets/kernel/qapplication.cpp
tests/auto/widgets/dialogs/qfiledialog/tst_qfiledialog.cpp
tests/auto/widgets/dialogs/qfiledialog2/tst_qfiledialog2.cpp
Change-Id: I4656d8133da7ee9fcc84ad3f1c7950f924432d1e
Use the correct method of QMetaEnum to convert enum values to names.
QMetaEnum::valueToKey() should be used, because it takes an enum value
as an argument, while QMetaEnum::key() takes an index of the enum value.
Change-Id: Ie895fcc935e8835e3d9c416ca34be8bfe82fd74e
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Changes the --extrawindows option to --numwindows with a default of 3,
and layouts all windows in rows and columns so that they are all
exposed at startup.
Change-Id: I5e8d63a14b778bcddc2fee3bf7e78d6664532b5b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Use the new qtConfig macro in all pro/pri files.
This required adding some feature entries, and adding
{private,public}Feature to every referenced already existing entry.
Change-Id: I164214dad1154df6ad84e86d99ed14994ef97cf4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This manual test pretends to be a modest safeguard
against QMenu related regressions on macOS. It takes
a slightly different approach than the existing menus
manual test, tracking observed regressions instead of
providing extensive coverage (though this may change
in the future).
These regressions are listed as task numbers below,
most of them arising from the now infamous change,
09acf326db QCocoaMenu: Decouple NSMenuItem from NSMenu
So, from now on, please run this and the menus manual
tests and look for regressions every time you make a
change regarding QCocoaMenu and related. And, if you're
fixing a regression, add the regression example to the
Menurama manual test.
Task-number: QTBUG-52931
Task-number: QTBUG-53085
Task-number: QTBUG-53251
Task-number: QTBUG-54633
Task-number: QTBUG-54637
Task-number: QTBUG-54698
Task-number: QTBUG-55121
Change-Id: I276e916dcdf00f1a44faf64d87050bc3a037a3b5
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Conflicts:
configure
5.7 now supports clang on android; but dev re-worked configure
src/gui/kernel/qevent.h
One side renamed a parameter of a constructor; the other added an
alternate constructor on the next line. Applied the rename to both
for consistency.
tests/auto/tools/moc/tst_moc.cpp
Each side added a new test at the end.
.qmake.conf
Ignored 5.7's change to MODULE_VERSION.
configure.json
No conflict noticed by git; but changes in 5.7 were needed for the
re-worked configure to accommodate 5.7's stricter handling of C++11.
Change-Id: I9cda53836a32d7bf83828212c7ea00b1de3e09d2
Change QOpenGLTextureBlitter to be a public API, as it was originally intended.
There are now significant external uses outside qtbase (C++ compositor examples
in QtWayland), and the API is considered proven enough.
[ChangeLog][QtGui] QOpenGLTextureBlitter, a utility class to draw textured quads,
has been made public.
Change-Id: If7a2c94e1494195e2aa375d214932fa7b4c78321
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Add a test for embedding Qt windows into foreign windows.
Complements the existing "foreignwindows" test (which embeds
foreign windows into Qt).
The test has a simple UI based on QRasterWindow allowing
for checking events and geometries.
Task-number: QTBUG-41186
Change-Id: Ie62a3e250ca666e2fa5c2e3ef37ef0654829397c
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Conflicts:
src/corelib/io/qtemporarydir.cpp
One side encapsulated a repeated piece of #if-ery in a local define;
the other added to the #if-ery. Made its addition to the other's.
src/corelib/kernel/qeventdispatcher_unix_p.h
One side moved some members into a struct; this collided with a #undef
check that neither side now has. Discarded the #undef part.
src/gui/opengl/qopengltexturehelper_p.h
5.7 deleted a bunch of methods; not clear why merge got confused.
src/tools/moc/moc.cpp
One added a name to the copyright header; another changed its URL.
Change-Id: I9e9032b819f030d67f1915445acf2793e98713fa
Conflicts:
qmake/library/qmakebuiltins.cpp
qmake/library/qmakeevaluator.cpp
qmake/library/qmakeevaluator.h
qmake/project.h
QMakeEvaluator:
* evaluateConditional(): one side changed return type, the other
changed a parameter type.
* split_value_list(): one side changed a parameter adjacent to where ...
* expandVariableReferences(): ... the other killed one overload and
changed the survivor
src/corelib/io/qlockfile_unix.cpp
One side changed a #if condition, the other moved NETBSD's part of
what it controlled.
src/corelib/tools/qdatetime.cpp
One side fixed a reachable Q_UNREACHABLE in toMSecsSinceEpoch(), the
other moved it from the private class to the public one, in the midst
of the "short date-time" optimization, which confused diff entirely.
One side changed a QStringLiteral to QLatin1String, the other rewrote
adjoining code.
src/network/kernel/qauthenticator.cpp
Both rewrote a line, equivalently; kept the dev version.
src/platformsupport/fontdatabases/mac/qfontengine_coretext.mm
src/platformsupport/fontdatabases/mac/qfontengine_coretext_p.h
One side changed #if-ery that the other removed.
tools/configure/configureapp.cpp
One side added a check to -target parsing; the other killed -target.
tests/auto/testlib/selftests/expected_cmptest.lightxml
tests/auto/testlib/selftests/expected_cmptest.teamcity
tests/auto/testlib/selftests/expected_cmptest.txt
tests/auto/testlib/selftests/expected_cmptest.xml
tests/auto/testlib/selftests/expected_cmptest.xunitxml
Regenerated using generate_expected_output.py
I note that quite a few other expected_* come out changed, now.
There was no git-conflict in
src/widgets/kernel/qformlayout.cpp
but it didn't compile; one side removed some unused methods; the other
found uses for one of them. Put FixedColumnMatrix<>::removeRow(int)
back for its new user.
Change-Id: I8cc2a71add48c0a848e13cfc47b5a7754e8ca584
Add a class to display debug messages, providing convenience functions for
installing and formatting parameters like indentation. It prints a startup
message containing relevant information about Qt.
Change-Id: Id0a19adbb5953a6ded1a8e692f242b63748e7273
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Output the class hierarchy until a base class within QtWidgets is found.
Change-Id: I0ecee22e2ead1dea8b39cce8ca2f0739290aac22
Reviewed-by: Alexandru Croitor <alexandru.croitor@theqtcompany.com>
Now that the minimum deployment target (and thus SDK) is 10.9 for OS X
and 7.0 for iOS, all code paths affecting platform versions lower than
the aforementioned are removed.
Change-Id: Id985c7259c4ac069319d88f2c29c9559ae9e8641
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
In German layout, "Ctrl+]" is "Ctrl+AltGr+9".
Task-number: QTBUG-51848
Change-Id: I8c05c13a4d46c0818ce4f56ce476c5310a677af2
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
So we know what we're looking at if there's a test failure. This is like
QNetworkInterface.
Change-Id: Id75834dab9ed466e94c7ffff1444bf51f615e944
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
the "generated by qt creator" header is not supposed to be checked in.
Change-Id: I7626c0bd16f83d81b3facd216a04e7d505942256
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Allow tmpfs filesystems to be reported, as they're often usable by the
user, mounted in /tmp and in /run (the fs for $XDG_RUNTIME_DIR).
But disallow anything whose device is not a pathname. This catches most
of everything else that wasn't specifically tested for before, like
virtual fuse filesystems, like GVFS.
Change-Id: I3e15a26e0e424169ac2bffff1417b7cee0f8ec97
Reviewed-by: Ivan Komissarov <ABBAPOH@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The path "/usrfoo" starts with "/usr", so if you tried to get
QStorageInfo("/usrfoo") when "/usr" is a mount point, you'd get the
wrong filesystem.
[ChangeLog][QtCore][QStorageInfo] Fixed a bug that caused QStorageInfo
to report information for the wrong filesystem if there is a mounted
filesystem at a path that is a prefix of the requested path (e.g., it
would report "/usr" filesystem for "/usrfoo").
Task-number: QTBUG-49498
Change-Id: I3e15a26e0e424169ac2bffff1417b7a27cd0132d
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Fix a warning about a missing case statement.
Change-Id: Ic89646704d62668cf83c463dbf6e9b549a4b5200
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
newer versions of qt creator understand QMAKE_EXTRA_COMPILERS and
INSTALLS, so there is no need to list the files twice.
Change-Id: Iccf3cc3248daf3422b8c366c2eb2d2f46c5f08d1
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Remove documentation of enumeration values and code from manual test.
Change-Id: I8e6cbbe11ab38421fb29595ae79351f5a919ff70
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Miter limits below 1.0 are not valid in PDF and trigger an error in the
Reader. This change enforces a minimum miter limit of 1.0, and it adds
a manual test for producing a PDF file demonstrating this issue.
Task-number: QTBUG-52641
Change-Id: I1c78b1c4a44579e95e1cddfb459926d304e60165
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
We have a bug that proximity events are generating them spuriously;
this is a way of testing it.
Task-number: QTBUG-52921
Change-Id: I490dfcf8d5b325f612b733e29fd49de9418bb19e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
They were duplicating other enumeration values
(WindowTransparentForInput, WindowOverridesSystemGestures) and were
only supported on Windows CE.
Task-number: QTBUG-42897
Task-number: QTBUG-51673
Change-Id: I993a933ee2a3dc8a0ebd7ba6aef80b456f50a657
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Add dragging functionality to the labels showing a pixmap
cursor, allowing for testing DnD with pixmaps with device pixel ratio.
Task-number: QTBUG-46068
Task-number: QTBUG-50938
Change-Id: If6781f380864e614efd4328e8b880b57cd900511
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
- QMouseEvent::screenPos() should be global desktop position
- QDesktopWidget::screenNumber() should tell the correct screen
- QGuiApplication::topLevelAt(screenPos) should find the window where
the mouse is clicked
Change-Id: I9a63ab3ee1944b7246551d0f3d5e37f0d2aa5457
Reviewed-by: Błażej Szczygieł <spaz16@wp.pl>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Update files using old header.LGPL3 to header.LGPL
Update files using old FDL template to use new one
Update files using old BSD template to use new one
Change-Id: I36a78272516f9953d02956522f285b40adfc8915
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Apply the device pixel ratio from the widget unless Shift is pressed.
Task-number: QTBUG-46068
Task-number: QTBUG-50938
Change-Id: Ib806b7e545fa228043566800d22d1002728732bf
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
Add a toggle for setting a triangular mask on the main window.
Task-number: QTBUG-50938
Change-Id: Id4a3ee0b80e170f4ee1d195e60ce7bfa8e524359
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
This change partially reverts 1bfc7f68 about QT_HAS_BUILTIN define
and undef in src/corelib/tools/qsimd_p.h.
This change is also squashed with "Fall back to c++11 standard
compiler flag for host builds" which is done by Peter Seiderer.
Conflicts:
mkspecs/features/default_post.prf
src/3rdparty/sqlite/0001-Fixing-the-SQLite3-build-for-WEC2013-again.patch
src/3rdparty/sqlite/sqlite3.c
src/corelib/tools/qsimd_p.h
src/gui/kernel/qevent.cpp
src/gui/kernel/qwindowsysteminterface.cpp
src/gui/kernel/qwindowsysteminterface_p.h
src/plugins/bearer/blackberry/blackberry.pro
src/plugins/platforms/cocoa/qcocoasystemsettings.mm
src/plugins/platformthemes/gtk2/gtk2.pro
src/plugins/styles/bb10style/bb10style.pro
src/sql/drivers/sqlite2/qsql_sqlite2.cpp
tools/configure/configureapp.cpp
Task-number: QTBUG-51644
Done-with: Peter Seiderer <ps.report@gmx.net>
Change-Id: I6100d6ace31b2e8d41a95f0b5d5ebf8f1fd88b44
Add a command line tool that can either take a list of window ids and output
information on them using a verbose debug stream or embed foreign
windows using QWidget::createWindowContainer().
Task-number: QTBUG-41186
Change-Id: I14e436b5d08828f5b78b29e0701daeffe11367d3
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
It now exists in QtGui.
Task-number: QTBUG-48849
Change-Id: I9107c96e0010252bc50bcb02ef006cb46bd942df
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
This also reverts commit 018e670a26.
The change was introduced in 5.6. After the refactoring, 14960f52,
in 5.7 branch and a merge, it is not needed any more.
Conflicts:
.qmake.conf
src/corelib/io/qstandardpaths_mac.mm
src/corelib/tools/qsharedpointer_impl.h
tests/auto/widgets/itemviews/qlistview/tst_qlistview.cpp
Change-Id: If4fdff0ebf2b9b5df9f9db93ea0022d5ee3da2a4
Empty clipRect means "clip away completely", not "no clipping".
Task-number: QTBUG-50719
Change-Id: I6a9dd66130716a921fe9fc245582274e3c9718fe
Reviewed-by: Paul Olav Tvete <paul.tvete@theqtcompany.com>
- Make it possible to pass an optional root widget to dumpAllWidgets().
- Add option to output size constraints of widgets/windows.
- Output normal geometry of top levels.
Change-Id: Ib48809d070c5721fe4688a2ad39cb99f286618de
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Not that we require it, but since The Qt Company did it for all files
they have copyright, even if they haven't touched the file in years
(especially not in 2016), I'm doing the same.
Change-Id: I7a9e11d7b64a4cc78e24ffff142b4c9d53039846
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
In German layout, "Ctrl+/" is "Ctrl+Shift+7".
Change-Id: I50f3d77c4c76e7eb7cffe31283a3b73074324fea
Task-number: QTBUG-47122
Task-number: QTBUG-50360
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
When recursing over the windows, the code did not take into account
that EnumChildWindow enumerates grand children as well. Exclude
those by checking for the direct parent in the recursion so that
the hierarchy is printed correctly. Add more information about
class and module and rearrange the output a bit so that the window
title is more prominent.
Task-number: QTBUG-50206
Change-Id: Iffb12c44eda9d09da5eb14a8405aee52ed3aa849
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
The qt_poll function calls recv to query whether fds marked by select
as readable should be marked POLLIN or POLLHUP in the pollfd structure.
On many platforms such as QNX this requires extra link-time libraries
which were not previously required by QtCore.
While the qt_poll function is intended as a fallback mechanism only for
those platforms which do not implement poll natively, the function was
compiled unconditionally whenever QT_BUILD_INTERNAL was defined, e.g.
in developer builds.
Additionally the function was included on those systems that define poll
in system headers so that configure determines build-time availability,
but do not define _POSIX_POLL > 0 or indicate POSIX:2008 compliance via
either the _POSIX_VERSION or _XOPEN_VERSION macros. On those systems a
sysconf query for _SC_POLL was performed to determine at runtime whether
to call the system poll or qt_poll.
Both of these cases are in fact counterproductive. In the first case the
sole consumer of the function is a single manual unit test. In the
second, to my knowledge no platform requires the runtime fallback.
Despite that, we were forcing an extra dylib in both cases.
Both cases are fixed by 1) moving the implementation into its own file
for the unit test to include and 2) dropping the dynamic fallback if
configure determines availability of poll at compile-time.
This also reverts commit 1377709711, which
added -lsocket for QtCore on QNX.
Change-Id: I2dd10695c5d4cac81b68d2c2558797f3cdabc153
Reviewed-by: James McDonnell <jmcdonnell@qnx.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This function is introduced to safely provide poll(2)-like semantics for
socket multiplexing on Unix-like platforms. For platforms where no poll
system call is available, an implementation based on select(2) is provided.
Change-Id: I320e97dae5924316675a74d1897c48cae292ac6d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The platform is no longer supported or actively maintained, and is
in the way for improvements to the Unix event dispatcher and QProcess
implementations.
Change-Id: I3935488ca12e2139ea5f46068d7665a453e20526
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Currently QOpenGLWidget and QQuickWidget do not support having native
child widgets inside the same top-level window. In some cases this is
inevitable, f.ex. multimedia may require native windows when used from
widget apps. winId() calls made for various (valid or invalid) reasons
are also problematic.
There are no blockers for supporting this setup, however. By storing
multiple texture lists (one for each subtree where the root is a
native widget), adding the missing markDirtyOnScreen calls, letting
each native widget access the correct texture list (i.e. the one
corresponding to its children) when they are (separately) flushed, and
fixing composeAndFlush() to take the update region and the (native
child) offset into account, it can all be made functional.
The change also fixes the issue of keeping GL-based compositing
enabled even after all render-to-texture widgets in the window become
hidden. Due to the changes of how such widgets are gathered,
composeAndFlush() is not invoked anymore when no such widgets are
discovered for a given native parent. This is great since having
compositing enabled infinitely is an issue for applications like Qt
Creator that implement certain views with QQuickWidgets but cannot
afford the cost of texture uploads in other places (e.g. for the text
editor) on slower machines.
The openglwidget manual test is greatly enhanced to test various
situations (MDI, scroll areas, tab widgets, QOpenGLWidget as native
child, QOpenGLWidget with non-tlw native parent, etc.)
Task-number: QTBUG-48130
Task-number: QTBUG-49172
Change-Id: Iad098359c8bcf749f01c050da0853415e1550eda
Reviewed-by: Paul Olav Tvete <paul.tvete@theqtcompany.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
* Georgian lari currency symbol
* A large collection of CJK unified ideographs
* Emoji symbols and symbol modifiers
* Letters to support the Ik language in Uganda, Kulango in
the Côte d’Ivoire, and other languages of Africa
* A set of lowercase Cherokee syllables, forming case pairs
with the existing Cherokee characters
* The Ahom script for support of the Tai Ahom language in India
* Arabic letters to support Arwi—the Tamil language written in the Arabic script
For more details, see http://www.unicode.org/versions/Unicode8.0.0/
[ChangeLog][QtCore] Unicode data updated to v.8.0
Change-Id: If255f95c9c45655b721369a116299da3cabbba0a
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Add a debug proxy style that wraps around an existing style and outputs
the parameters and return values of its function calls, for debugging
QStyle.
Task-number: QTBUG-47084
Task-number: QTBUG-45055
Change-Id: I638618e83bbac8ca4fdce31441bf4c913e911154
Reviewed-by: Andy Shaw <andy.shaw@theqtcompany.com>
Assuming that the target is always GL_TEXTURE_2D is not going to be sufficient
when working with EGLStreams for example where GL_TEXTURE_EXTERNAL_OES is a
must. The blitter is now changed to support multiple programs so other targets
can easily be added as well in the future, if necessary.
Change-Id: I247d30600222fb5af6305ed5d9740baa5e43e83e
Reviewed-by: Louai Al-Khanji <louai.al-khanji@theqtcompany.com>
Implement as generic "@Nx" support in an exported
qt_findAtNxFile function.
3x devices now get one extra file existence test
in cases where @3x versions are not present. 1x
devices are still on the fast path where there are
no extra file system accesses.
Add an @3x image to the highdpi manual test.
Change-Id: I4ce3fc245ada01ea410abe1443ceb1e3abf7c17f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Use character literals where applicable.
Change-Id: I1a026c320079ee5ca6f70be835d5a541deee2dd1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Need to survive having screens detached/reattached on X11.
Task-number: QTBUG-42985
Change-Id: I81cf9721f0cb61a29180c60d44d588063266e651
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Cocoa is basically just AppKit + CoreData. Since we do not use CoreData
in Qt, there is no reason to link to it or (transitively) import its
headers.
This is just a mechanical replacement of -framework Cocoa with
-framework AppKit and <Cocoa/Cocoa.h> with <AppKit/AppKit.h>
Change-Id: Ibcfc8a03c0ddff27a67fbc87dd7bd58a4b648956
Reviewed-by: Mika Lindqvist <postmaster@raasu.org>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
Fix usage of API that is marked deprecated.
Change-Id: Ib9a45e93084fb5b0d0d3aefd64b755dff7c696d6
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
This commit moves the functionality from QtNetwork's QHostInfo to
QtCore. Note that due to Windows ws2_32.dll's quirky behavior of
requiring WSAStartup before calling gethostname, this change required
moving the initialization to QtCore too.
On Linux systems, gethostname() gets the name from uname(), so we bypass
the middle man and save one memcpy.
Change-Id: I27eaacb532114dd188c4ffff13d32655a6301346
Reviewed-by: Erik Verbruggen <erik.verbruggen@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add several new tests to verify that Qt behaves properly when
high-DPI scaling is enabled. Add a generic framework for
manual tests for good measure. This could be refactored and
used for other manual tests later.
Includes tests written by Morten and Friedemann.
Task-number: QTBUG-46615
Change-Id: Ib6762ec1454711e71f0c094b19015932b99e8d6d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
f9408317e7 was unfortunately
approved though it had an annoying bug. The patch had
an assign of a visual index into a logical index.
This patch fixes that issue.
Change-Id: I9cc75e4e9701858c92e2c3e5817415041b42f8e8
Reviewed-by: J-P Nurmi <jpnurmi@theqtcompany.com>
Add command line options for
- Grabbing gestures
- Suppressing mouse and touch events
Add gesture events to the log.
Add a hierarchy of gesture classes storing the parameters
of finished gestures with drawing functionality and
implement for pan and swipe.
Task-number: QTBUG-46195
Change-Id: I019fe5b60116316a54e11b2c30e1d34f5e72bcf0
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
For example the Galaxy Note series of devices. This makes possible
drawing applications which handle stylus events differently from touch
or mouse. As on any other platform, if the application does not accept
the QTabletEvent, a QMouseEvent will be synthesized.
Also fix the tablet manual test to show larger circles on hidpi devices.
[ChangeLog][Android] stylus devices such as the S Pen generate
QTabletEvents
Task-number: QTBUG-38379
Change-Id: Ib594f453b8403cc06aa4e440a76f07afa3bac38c
Reviewed-by: Paul Olav Tvete <paul.tvete@theqtcompany.com>
Draw touch points as dots and mouse points as circles
to be able to verify High DPI scaling.
Change-Id: I2293adbcc726391f0d9e156935d609b957432029
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
It is fully possible to show a window on all the connected screens
even when the screens are not virtual siblings, i.e. they do not
form one big desktop. When X is configured to use a separate screen
for each physical screen, it becomes essential to do setScreen()
either directly or via QDesktopWidget in case of widgets. The original
code attempting to call QWindow::setScreen() cannot succeed since there
is no QWindow available before the widget is shown. This is easy to
work around.
The app now works identically in all cases.
Change-Id: I519ca0c0109c68aac2f2d4e6972d14b55767b403
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
- Make the subject of the Property watcher settable.
- Embed it into a QMainWindow with menu and
listen to the screen changed event, setting
the new screen with a message about the position.
- Remove hash, close obsolete windows by iterating
over the top levels looking for the screen.
Change-Id: I4ed1122bab7c0cd9676d63995ce85a44719f4ba6
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
These values were added as part of upgrading to Unicode 7.0
Change-Id: Ib208828a7685ba4f89f0e2f06033f74c8ff13532
Reviewed-by: Andy Shaw <andy.shaw@theqtcompany.com>
Focus the test on embedding QWindow: Remove the
NSToolBar code. Use standard NSApplication startup
code. Use winId() to access the NSView instead of
QPlatformNativeInterface (which is gui-private).
Rename Window -> RasterWindow.
Change-Id: Ie98cb73020d2721743bb665b89b17f07f2bf984b
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
On OS X the application icon can be changed at runtime, so this adds a way
to set this via the QPlatformIntegration.
[ChangeLog][OS X] QApplication::setWindowIcon now changes the icon for the
application in the dock.
Task-number: QTBUG-43999
Change-Id: Ice298c0bd52f10f4866f37c6d3f20cf5419b7a1b
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
We need to track the active popup globally, having
parent windows track child popups is not sufficient
since there may be one or more intermediate windows
in between the event receiving window and popup window.
Add API to QOCocoaIntegration for tracking the global
popup window and use it instead of the per-window
tracking. Make sure to only close popups on clicks
outside the popup only. Add code to QNSView::handleMouseEvent
that redirects mouse events to the active popup.
Add manual test.
Change-Id: Ia3e3fd42d8fddf5c69f0c6879b333ca544521f61
Task-number: QTBUG-43464
Task-number: QTBUG-31937
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
This is a little-used feature which only affects how minimized icons
are displayed on certain older window managers, and is not necessary
even then. It has not been implemented in Qt 5 until now.
Task-number: QTBUG-44659
Change-Id: Ie6ead7a6f922878b349a096d905bf7f675dc2f31
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
There's no need to decode the event details here anymore, and anyway
this had a bug: it always said the device is unknown.
Change-Id: If99dddbe2136d95e818f4fe526f62650cbd7c1ca
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Some older (or weird) Linux distributions don't have /etc/os-release, so
let's try to read /etc/lsb-release instead. If we find a file called
/etc/<distronamelowercase>-release and it's bigger than the pretty name
we read from /etc/lsb-release, use that.
Because the order of the keys changes between the two *-release files,
we can't do a sorted search anymore.
Change-Id: I1a800c709d3543699131ffff13c48532d5074f3c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Dirk Hohndel <dirk@hohndel.org>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add command line test application that can print
the mime type of a file or dump all mime types.
Task-number: QTCREATORBUG-13996
Task-number: QTCREATORBUG-14005
Change-Id: I5ef2fa4b9fbab986b1db4fc0bd8abaacdf4f8fa0
Reviewed-by: David Faure <david.faure@kdab.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
... but choose HTTP/1.1 and continue connecting anyhow. According to
the NPN spec, actually we should choose SPDY:
"In the event that the client doesn't support any of server's protocols,
or the server doesn't advertise any, it SHOULD select the first protocol
that it supports."
However, some tested servers did not advertise anything and did not
support SPDY, so blindly trying the newest protocol would fail. We are
conservative in that case and choose HTTP.
Task-number: QTBUG-40714
Change-Id: Ia8aaf01fea74e13d9e4416306f85f1890b25559e
Reviewed-by: Richard J. Moore <rich@kde.org>
Change-Id: I6b551de331aa0386ea53d8e96f50b669777d2d69
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
We still have a bunch of Q_WS_ ifdefs in our code, which are easy to
mistake for Q_OS_ ifdefs when quickly scanning the code. By renaming
the ifdefs we make it clear that the code in question is dead.
In incremental follow-ups, we can then selectively either remove, or
port, the pieces that are dead code.
Change-Id: Ib5ef3e9e0662d321f179f3e25122cacafff0f41f
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
QDebug does not have noquote() in Qt 5.3.
Task-number: QTBUG-44021
Change-Id: If35b926d6b1e5bb9ad3534357630533dfcecd076
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
The text edit that shows which flags we have set should be updated in
PreviewWindow::setWindowFlags() and PreviewWidget::setWindowFlags()
but QWidget::setWindowFlags() isn't virtual so only the base class
one was called.
Change-Id: I5c9d47d003d5701dde1ab63df0d349f641d66f44
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
tst_collections.cpp
tst_collections.cpp(3138) : warning C4305: 'argument' : truncation from 'size_t' to 'bool'
tst_collections.cpp(3190) : see reference to function template instantiation 'void testContainerTypedefs<QVector<int>>(Container)' being compiled
with[Container=QVector<int>]
(repeated)
tst_qringbuffer.cpp(297) : warning C4267: 'argument' : conversion from 'size_t' to 'int', possible loss of data
tst_qringbuffer.cpp(300) : warning C4309: '=' : truncation of constant value
tst_qringbuffer.cpp(306) : warning C4267: 'argument' : conversion from 'size_t' to 'int', possible loss of data
tst_qrawfont.cpp(947) : warning C4309: 'argument' : truncation of constant value
tst_qsslsocket_onDemandCertificates_member.cpp(217) : warning C4189: 'rootCertLoadingAllowed' : local variable is initialized but not referenced
Change-Id: I6143d4ad121088a0d5bdd6dd2637eb3641a26096
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Output the current active/modal/popup windows when receiving
FocusAboutToChange or FocusIn events.
Task-number: QTBUG-42731
Change-Id: Ia88e9a9b41f7c80fb7a2a048b06da56d989ff18a
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
The OpenGL windows should have some more obvious
transparent areas in them.
Change-Id: I7d000cd367208f99a79b11c341bf94062613f357
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
The window size was too small on high-DPI screens.
Save the default text color instead of setting it to black.
Change-Id: I78b50624110be0cb1d077d3782d421eb323f4fb0
Reviewed-by: Paul Olav Tvete <paul.tvete@theqtcompany.com>
[ChangeLog][QPA][Xcb] GLX and EGL code paths are now dynamically
resolved, making it possible for one build of a plugin to use both code
paths. Default is to use the GLX code path if available. This can be
overwritten by specifying QT_XCB_GL_INTEGRATION=xcb_egl as an
evnironment variable. Enable qt.xcb.glintegration.debug to get debug log
output of what integration is used
Change-Id: Ia9fa95fcca3d901b91dadb8c98a695fea0ae3b1e
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Add a functions to dump out texts character by character and
as code.
Task-number: QTBUG-43191
Change-Id: I1ac17f2485563f909b71bb1fbd1fd595d1d94223
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
If you press and hold a section in a header view you can extend the
selection to more rows by moving the mouse. This worked fine until you
moved the mouse outside the geometry of the header view. The expected
behavior was then to scroll the view (this is what happens with extended
selections on regular table cells).
[ChangeLog][QtWidgets][QHeaderView] Auto-scroll the view when making
extended row/column selections.
Change-Id: Ic65aa34d370e74054b2123ab57edb1add0e8adb9
Task-number: QTBUG-21201
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
- Fix prototype for glinfo() for Qt 4
- Add more event types and object type flags to event filter.
Change-Id: Ia4160b40486d054e860a339e7b5c9c28695330ae
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Add a set of helper functions and classes providing functionality
for dumping widget/window hierarchies and logging events. They
can be used by including a .pri file for diagnosing bugs and
comparing Qt 5 to Qt 4.
Change-Id: I0206f8e57b02540cd80a3e9446c894023d442ddc
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Unlike qtouchevents, this provides a touch area which logs its
events and devices.
Task-number: QTBUG-40461
Change-Id: Iaaa3589dd692caf8c7078f5ed2ff1e8b2322a369
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
The Overall goal is to make it possible to use correctly-
sized pixmaps in a predictable way, while still doing
something reasonable with small and large pixmaps.
(The recommended pixmap height is up to 18 points.)
Enable use of rectangular icons by selecting pixmaps
based on pixmap height.
Draw a low-resolution pixmap on retina displays if
there is no high-resolution pixmap available. Scale
large pixmaps to fit the available menu bar area.
Add a manual-test with various pixmap sizes
Task-number: QTBUG-33441
Change-Id: I1926181fe27cae526bae58022df3240bae9f8ac8
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
On X11, setting the transient parent is not enough to get it
centered w.r.t. its parent: it must also be a dialog window.
Change-Id: Icfc664e17e53f23cd025dead30e3966f859a1dc5
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
This is a very useful tool to test the behavior of a given platform
when it comes to rendering on three contexts to three window surfaces
from the gui thread and calling swapBuffers for each.
Change-Id: If3abd055d0dee7cfb24098484326aa24261556bc
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Widgets and layouts added or inserted to a layout are checked for:
- Not being NULL
- Not being the parent widget of a layout or the layout itself,
respectively
Without this commit, adding a widget to its own layout would result in a
CPU-hogging infinite loop. Now, a warning is written to stderr and the
add or insert function call is ignored.
The checks are implemented as public functions of QLayoutPrivate and
thus accessible in QLayout's descendants to be used in various
"addWidget", "insertWidget", etc functions.
Unlike 'classical' layouts like QGridLayout, QFormLayout does indeed
accept widgets that are NULL. To not break this behavior, any call for
the check functions first tests if the widget or layout, respectively,
to test is NULL or not and calls the check only in the latter case.
Automated tests for QBoxLayout, QGridLayout, and QFormLayout were added.
For an unpatched Qt 5.3, each of those automated tests will freeze as
explained in QTBUG-40609. For a fixed version, warning messages about
invalid parameters to addWidget/addLayout/... calls will be read by
QTest::ignoreMessage, resulting in a passed test.
Change-Id: I1522d5727e643da3f7c025755975aca9f482676d
Task-number: QTBUG-40609
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Show debug output for rejected and currentColorChanged signals,
because accepting is not the only scenario to be tested.
Task-number: QTBUG-40855
Change-Id: If741ab19392e7d4314e0eff82a939d202ae86b48
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Followup to da9e02eb83:
If the stylus is a Wacom Art Pen for example, the regular_widgets
test will show a rotated ellipse with size proportional to pressure
for each tablet point, instead of a circle.
Task-number: QTBUG-39458
Change-Id: I4bbb5f8ceabf7006928d95df3ecd62378394f085
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@digia.com>
Manually included changes from
3a347a4e70
in src/opengl/qgl.cpp.
Conflicts:
src/opengl/qgl_qpa.cpp
src/plugins/platforms/android/androidjnimain.cpp
Change-Id: Ic26b58ee587d4884c9d0fba45c5a94b5a45ee929
This is helpful to e.g. test an NTLM proxy.
The test server currently does not support NTLM; this test offers a
possibility to specify a proxy server via environment variables.
Change-Id: Iea94656d38424c1d932fc854d13ca15ca47cdd68
Reviewed-by: Richard J. Moore <rich@kde.org>
QOpenGLWidget is now public.
In addition Qt::WA_AlwaysStackOnTop is introduced to support the
special case of semi-transparent QOpenGLWidget or QQuickWidget on
top of regular widgets.
hellogl_es2 becomes the qopenglwidget example. This example performs
painting both via QPainter and native GL commands and has the OpenGL
widget combined with other, normal widgets.
The widget stack receives some changes when it comes to renderToTexture
widgets like QQuickWidget and QOpenGLWidget. Calling update() will now
result in a paint event, which is essential for QOpenGLWidget since we
want it to behave like a regular widget. The dirty region handling is
extended specially for such widgets due to performance reasons.
(an OpenGL content update must not result in any backingstore painting,
and is thus handled as a different kind of dirtiness)
[ChangeLog] Added QOpenGLWidget. This widget serves as a replacement for QGLWidget.
Task-number: QTBUG-36899
Task-number: QTBUG-40086
Change-Id: Ibf7f82fea99b39edfffd2fc088e7e0eadbca25cf
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
- Show which button was pressed or released
- Render an ellipse proportional to pressure for each point drawn
- Different color for the eraser
- More complete output for each event
- Don't show mouse events by default, just as most tablet applications
can now ignore mouse events on the drawing canvas. But for the
purpose of testing interleaving of tablet and mouse events,
one can give the argument --mouse when starting this program
to show them too, as before.
Task-number: QTBUG-39458
Change-Id: I5e03f1aa748be39d524bd6984ff5d66579787cf9
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Compile on Windows, add command line options to activate the
various tests.
Task-number: QTBUG-38858
Change-Id: I38c6a9a6711831b2bd8b6ea051dd19615cc911a1
Reviewed-by: Alessandro Portale <alessandro.portale@digia.com>
It was always constructing a QUrl from the string causing the warning
"Non-native QFileDialog supports only local files" with the
new QUrl-based implementations of getOpenFileUrl(), etc.
Change-Id: Idd9bb432a48865df137f8f39f53014dda150ffe9
Reviewed-by: David Faure <david.faure@kdab.com>
So far, we had to listen to the QObject::destroyed signal from the QScreen
class to figure out whether a screen was removed. Often, this is already
too late, given that most of the QWindows have been moved by then and we
don't get to react before the windows are being set to the primary screen.
This patch introduces a new signal that will notify about a screen removal
before the screen is started to be destroyed, so that the application gets
to decide what to do with the screens before Qt decides to move things around.
[ChangeLog][QtGui][QGuiApplication] Added QGuiApplication::screenRemoved
signal to inform that a screen has been removed, before Qt reacts to it.
Change-Id: I99304179f4d345cae581a87baac6cff7b8773dea
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
When navigating with the directional keys or tab/backtab, there are
certain situations where the cell that is edited is incorrect.
For example, consider the table below.
'^' represents the starting cell and the direction of navigation.
'c' represents the index that is arrived at as the currentIndex prior to this patch as
reported by view.selectionModel()->currentIndex().
'x' is the cell that should be edited:
+---+---+---+---+
| | | e | |
+---+---+---+---+
| | x | |
+---+ +---+
| | c | |
+---+---+---+---+
| | | ^ | |
+---+---+---+---+
Before this patch, the cell that will actually be edited is c, rather
than x, so after editing the cell and pressing enter, the previous
contents of the cell will still be shown.
With this patch, currentIndex() will be changed after every call to
cursorMove(). Navigation into and out of cells is not affected because
the visualCursor member in the QTableViewPrivate tracks the keyboard
navigation entry point. If after the up navigation into the span, the
user presses up, the cell entered is 'e', not the cell above 'x'.
Task-number: QTBUG-29239
[ChangeLog][QtWidgets][QTableView][QTableWidget] currentIndex() now
reflects the top left cell when in a span.
Change-Id: I3dc3db46ebba340102860fc4ad98fcaf91484983
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
On Windows, it is possible to pass native Windows paper source
ids >= DMBIN_USER to QPrinter::setPaperSource() and they are
listed by supportedPaperSources().
Task-number: QTBUG-38897
Task-number: QTBUG-38888
Change-Id: I8f1264e80ce5bdddd3873602200b24eabee00502
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Add also a manual test application. For GLX there is an autotest since
that is likely to be run on one of the CIs. For EGL and especially
eglfs this is likely not the case so a manual test is better.
Task-number: QTBUG-37552
Change-Id: Ib09db5d909befb68d16f69abd401a56abe55f28a
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Now menu items and key shortcuts for Cut, Copy, Paste and Select All
work in the standard ways in dialogs such as the file dialog, provided
that the corresponding QActions have been created and added to the menu.
This depends on new roles to identify each menu item which is so
broadly applicable that it should work even when a native widget has
focus; but the role will be auto-detected, just as we were already
doing for application menu items such as Quit, About and Preferences.
When the QFileDialog is opened, it will call
redirectKnownMenuItemsToFirstResponder() which will make only those
"special" menu items have the standard actions and nil targets. When
the dialog is dismissed, those NSMenuItems must be reverted by calling
resetKnownMenuItemsToQt(), because to invoke a QAction, the NSMenuItem's
action should be itemFired and the target should be the
QCocoaMenuDelegate.
Task-number: QTBUG-17291
Change-Id: I501375ca6fa13fac75d4b4fdcede993ec2329cc7
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Add all the available QPrinter options to the QPrintDialog manual test
to allow for testing presets.
Change-Id: Ia6394094fc9920da0d6c645793d51650404899d8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Convert the manual print dialogs test to use a ui file as subsequent
changes will add a lot more widgets.
Change-Id: I06ac54b67532f0eea1e91a2d9aca4f587d2fa332
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Add a new QPA class to abstract Print Devices. Each platform instance
will encapsulate all required details about a print device instead of
the code being distributed throughout the print engine and print
plugin.
Change-Id: I7f6a537ad55a6e7f599d83f461b1e2ee62b15094
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
At least if the platform plugin's QPlatformOpenGLContext implementation
supports it.
This completes the QOpenGLFunction changes necessary for dynamic loading
of the OpenGL implementation. Everything else is up to the platform plugin.
Change-Id: I710e6fbee3005360ecf02bc6ef976e1beb513819
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Currently the only supported SPDY version is 3.0.
The feature needs to be enabled explicitly via
QNetworkRequest::SpdyAllowedAttribute. Whether SPDY actually was used
can be determined via QNetworkRequest::SpdyWasUsedAttribute from a
QNetworkReply once it has been started (i.e. after the encrypted()
signal has been received). Whether SPDY can be used will be
determined during the SSL handshake through the TLS NPN extension
(see separate commit).
The following things from SPDY have not been enabled currently:
* server push is not implemented, it has never been seen in the wild;
in that case we just reject a stream pushed by the server, which is
legit.
* settings are not persisted across SPDY sessions. In practice this
means that the server sends a small message upon session start
telling us e.g. the number of concurrent connections.
* SSL client certificates are not supported.
Task-number: QTBUG-18714
[ChangeLog][QtNetwork] Added support for the SPDY protocol (version
3.0).
Change-Id: I81bbe0495c24ed84e9cf8af3a9dbd63ca1e93d0d
Reviewed-by: Richard J. Moore <rich@kde.org>
This fixes the issue that the blitter required sometimes the
texture wrapping to be repeat
Change-Id: I86150d008422facf9040873b0983b0e44be9ad24
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
The Origin for Target rect was deemed a confusing concept. The current
implementation would translate the target rect to the coordinate system
specified. However, the order and "direction" of the vertices would
always be the same. So drawing a texture in for one target rect defined in
one coordinate system would paint the texture the same way as it would
when a texture was drawn for a target rect drawn in the "opposite"
coordinate system. The point with this was that if you wanted to "flip"
the texture you would specify that with the source coordinate system.
However, this approach breaks on different levels, such as QRect has functions
which expects a top left coordinate system (ie. top() and bottom()).
In the end Qt uses a top left coordinate system, hence QWindow specifies
a top left coordinate system, and hence the api becomes easier if it is
not possible to define the coordinate system of the target viewport.
Change-Id: I7dd59b3718380876e87a4bff88381d7a1c7d58c1
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Integrate with QOpenGLTextureBlitter, QOpenGLWidget and friends.
Change-Id: Ic2867b713a21a3d2820d546174fc9164b3dd220c
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Enable child widgets (without a native window) that render to an FBO
and are composed with the raster backingstore by the platform plugin.
A preliminary version of QOpenGLWidget is included as private API.
Change-Id: I8f984a4d7db285069ce3d6564707942c823d890d
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Useful for bug reports and test logs.
[ChangeLog][QtCore] QLibraryInfo provides information on how
Qt was built.
Change-Id: I867197fd7d2e10bcdf01a8eb47c9c1e03647e2c1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... which is needed to negotiate the SPDY protocol.
[ChangeLog][QtNetwork][QSslConfiguration] Added support for the Next
Protocol Negotiation (NPN) TLS extension.
Task-number: QTBUG-33208
Change-Id: I3c945f9b7e2d2ffb0814bfdd3e87de1dae6c20ef
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@digia.com>
private api, but useful for 2d gui code that suddenly finds itself
needing to get a set of textures onto some fbo
I didn't want to include ARB_copy_image since it looks like its from
texture/renderbuffer -> texture/renderbuffer while this class implies
texture -> write fbo. We could wrap ARB_copy_image in QOpenGLTexture or
some other class or we can add it later.
I have not added any QOpenGLTexture functions since this class opperates
on the GLuint identifier. We can add overloads later.
Change-Id: I3e565b33466c1c183a249a33c3e82c6786debd55
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Showing, moving and resizing
Contrarily to what an NSWindow does to its NSViews, child NSWindows need
to be explicitly shown and hidden, and clipped if the parent NSWindow
changes geometry. Also, hiding an NSWindow will not hide its child
windows. This needed to be managed manually, adding 2 additional states
to QCocoaWindow to reflect whether a child window has been clipped out by
any ancestor geometry change, or hidden by any ancestor being hid. Also,
ordering out an NSWindow will remove it fromm its parent's child windows
array, making necessary to maintain a parallel list of child windows in
QCocoaWindow.
Stack order
Although child NSWindows can be ordered relatively to each other, they
need to be added again to be moved lower in the window stack. This also
means the windows above it need to be added on top.
Key (focus) status
One of the remaining issues, is to make sure the top level window keeps
the "key status" while still forwarding key events to the child window.
Keeping same event propagation
This use case is best illustrated with undocking QDockWidgets (if these
are child NSWindows). The main issue is to make sure the QDockArea will
get the mouse events right after undocking a dock widget. We used a similar
workaround as the "key status" problem, and manually forward the mouse
events to the dock area's QWindow.
Manual test, by Morten Johan Sørvig, included.
Task-number: QTBUG-33082
Task-number: QTBUG-22815
Change-Id: I50e34936fb82bff013e99f4bcb3bd0db0704c6ae
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
... to have a real world test case for uploading via SSL,
QHttpMultiPart (+ resetting) etc.
Change-Id: I004dd6f2507776b2fb8ebe1f02625b40abff6261
Reviewed-by: Richard J. Moore <rich@kde.org>
the diff -w for this commit is empty.
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I77bb84e71c63ce75e0709e5b94bee18e3ce6ab9e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Press and hold is an interaction available on many platforms,
particularly when touch is involved. In Qt Quick this is exposed to the
user via MouseArea::onPressAndHold. This value should not be hard-coded,
but rather use a platform-specified default. This commit adds the
low-level hooks necessary for that to happen.
Task-number: QTBUG-24793
Change-Id: I621a8ac9de66b881e34336228056bffbb6306a70
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
It is probably better not to have a default boolean in
QHeaderView::setResizeContentsPrecision
Task-number: QTBUG-34665
Change-Id: I0bb2c35abc1d5713bb3ee65df3af86c04f175a38
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Allowing for creating a printer in various modes
and toying with the paper settings.
Task-number: QTBUG-34276
Change-Id: Ieb35dc55c509f84d7d81817c7903e02a41ba8b44
Reviewed-by: John Layt <jlayt@kde.org>
Sometimes it is nice to be able to replace a widget in a layout.
Change-Id: I23a6a65e417e94d53bc48639503db1a142bc3f10
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Before we went through non hidden indexes, but we never considered
the visual order. This patch fixes that issue.
Though it was wrong before, it probably never was a big problem
since it was unlikely that the tree (on logical index 0) was
swapped or hidden, but
658e42e77a
makes it more likely that problems with wrong focus could occur.
Change-Id: Ic7b6cd2df1f8638be1a7c9e6df27f428685869fc
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Currently just a convenience method for setNameFilters(), it uses
QMimeType to create a name filter from the glob patterns and
description defined in each MIME type.
In the longer term, this API could be used to do proper mimetype-based
filtering using QMimeDatabase::mimeTypeForFile() in the builtin
QFileDialog (aka "not native"), instead of only looking at globs via the
name filters.
Change-Id: I0edccf5f30c514481b47cd100d743d1ed7a24024
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
In delegates we get into trouble with calling showPopup in
setEditorData (edit by double click) - and that is not reasonable.
The user has requested edit - and therefore it is natural to save
a click for the user and show the popup at once.
However that fails since we have the mouse down and as soon as we
release the mouse we will call hidePopup.
This patch ensures that the mouseReleaseEvent, that caused the
problem is only considered if we have had a mousePressEvent.
Change-Id: Ibe031fcb9ad2158f6969e41127bbb5f651b9cae6
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Even though detailed text does not work that well, it should still
be in the manual test.
Change-Id: I051f9f0592ad9206dc42f0e9929c1be32baec832
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
This patch allows to set which logical index the tree is in.
Before the tree always displayed data from the logical index 0,
but it is actually more likely that the user wants to have data
from visual index 0 (which can be done by special value -1).
There is nothing special about logical index 0, and not being
able to change the tree-data is just annoying.
Change-Id: Ib070ce93343a0d2fbac3ad5a42cb4359401ac87c
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
