This aligns with the other mobile platforms.
Task-number: QTBUG-38691
Change-Id: I7b9b70a1182c0e53f997cae111ec46b5161b0b48
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Remove the intermediate pixmap in the backing store and draw directly to
the window swap chain. This is faster and reduces memory pressure on the
graphics card.
In case of native child widgets we need to read back the back buffer,
which incurs an extra copy in this case.
In an artificial benchmark drawing animated full screen
gradients as fast as possible this patch increases performance by 42% on
my current machine from 480fps to around 680fps, i.e. the time for
actually getting the pixels to the screen is now lower.
Change-Id: Ifbeda0e199afec03cecfe76337679a9e9d082bdd
Reviewed-by: Risto Avila <risto.avila@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
This patch reuses the code and pattern used to vectorize scaling, to
also vectorize rotating transforms in fetchTransformedBilinearARGB32PM.
This provides significant improvements in QtWebKit on benchmarks using
rotating transforms.
Change-Id: If250e0f5dae1ff0f954301f96cc8970a99ae3e9d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
When using directfb platform the drawing of some widgets (e.g. Toolbar)
would crash the application.
Pixmap device pixel ratio can be used in QCommonStyle::drawControl() as
a denominator to calculate pixmap width or size. The drawing of some
widgets (e.g. Toolbar) would fail the assertion of a non-zero
denominator.
This commit initializes the device pixel ratio when generating
BlitterClass pixmaps and makes QBlittablePlatformPixmap::metric(
PdmDevicePixelRatio) return devicePixelRatio() instead of 1.
Task-number: QTBUG-38709
Change-Id: Ia8b96c5341b5ac1297c483deed1c695846398b88
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Change-Id: I003e59bd50754dbbda23de5c55096ca2d25b7a7a
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
When compiling with the -Wswitch-default flag, the compiler
spits warnings for the moc generated files.
In certain development environments (e.g. where MISRA rules
have to be followed) every switch statement needs to have a
default case. Unfortunately the moc generated files contain
switch statements without default case. This patch adds a
default statement to all switch statements that are generated
by the moc compiler.
Change-Id: I8f3d81e3463fce4d3abf2ea5d0fa8727a7d9ba2e
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When it gets 'calendarPopup' set, that is.
The reason lies, indirectly, in the extra margins we add to
QComboBoxes and other QPushButtons in the Mac style. However,
these extra margins do not apply to spinboxes, which is what
QDateTimeEdit is.
In particular, this causes Designer to show QDateTimeEdit at
the wrong size when it's not in a layout.
Task-number: QTBUG-38615
Change-Id: I3dd52e10db8c8970a6dc40b39fbe29dd86167daa
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
On some platforms all windows are by default forced into fullscreen mode when show() is executed.
In QMdiSubWindow we cannot handle the fullscreen state and should ignore it. Otherwise
the window will be forced in "normal" state and ignore any previously
executed geometry changes.
Change-Id: I09ce6507a1eac6a0adb3405ca3f423642d30f801
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Bernd Weimer <bweimer@blackberry.com>
The desktop doesn't belong to this application, we shouldn't be setting
it (assuming it is even possible). On X, for example, it's possible to
set the name and you end up with the root window having _NET_WM_NAME
pointing to the last application that created a QDesktopWidget.
Change-Id: Ib62d0a4d56a4d2a74afc6b33fa607867343e7aba
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
If the theme is not available then it should not try to use it when
getting the file system icon as it will cause a number of messages to be
outputted to the console as it is an invalid call.
Change-Id: I33003568f6785ee423c4a6e079a6c62c95145cbc
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
If the override cursor was set before
QtQuick2ApplicationViewer was shown then the cursor
was the default cursor and not the override cursor.
The new cursor was applied only if the window was
visible and the cursor has been set. Now the cursor
is applied also if override cursor is set.
Change-Id: I88618c719e43b2802e209bef440461c532d19f48
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
As it's meant for QML anyways, this allows it to coexist peacefully with
existing code.
Task-number: QTBUG-29806
Change-Id: Ib04993f47eb2f9f7fc49c4a5400f18f9682a7aaa
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Several objects are released without being retained.
This causes double free crash.
Task-number: QTBUG-37582
Task-number: QTBUG-35890
Change-Id: Ic64419c22ab555ba77ada1864feaff247798d3ad
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Valid for both the item and the menu destructions.
Task-number: QTBUG-38685
Change-Id: I024b93c8bb8facefeaad5e8b6c7be6bf049898ea
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Directly handling primitives is faster than using the catch-all fill
function which converts arbitrary paths into a direct2d geometry. So do
so.
Change-Id: I71ce73dbe75aa9b61e741c358d8787d0ea48ee46
Reviewed-by: Risto Avila <risto.avila@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
In the justification code, we unconditionally subtracted one
from the line_length, but then compared the result to 0 afterwards,
so we did not support when the line_length is 0 initially, which
can happen if it only consists of spaces (in which case
trailingSpaces will be non-zero and line_length will be zero.)
The fix is to bail out for both strings of length 1 and length 0.
[ChangeLog][Text] Fixed an assert when justifying a QTextLine
which only contains spaces.
Task-number: QTBUG-38520
Change-Id: Ib04993f47eb2f9f7fc49c4a5400f18f9682a72f2
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The plain text edit's smart repaint logic in
QPlainTextDocumentLayout::documentChanged assumes that during a change inside
just one block, the block is in the state before the edit and a call to
layoutBlock() is going to bring it up-to-date. Then only a comparison of the
bounding rect - before and after - is going to allow for smart repaints.
The assumption of the layout being in the same state as before the edit got
broken by commit cc57a2e90f, which introduced
code to use a QTextCursor within a slot connected to QTextDocument's
contentsChange signal. The usage of the QTextCursor there ends up updating the
layout of the block ahead of time, breaking the assumption and therefore the
optimization, in the sense that during changes in the preedit that cause a
change of height / line count, the old bounding rect in
QPlainTextDocumentLayout::documentChanged and the new bounding rect will be the
same. This causes a repaint of only the edited block, missing repaints of the
following blocks, even though the line count effectively changed.
So what's causing QTextCursor to mess with the layout is the attempt of
updating the vertical movement x property. This patch inhibits the update,
marking it as dirty for initialization later. This means that slots connected
to this low-level signal cannot rely on the cursor's visual x position, but
that doesn't seem useful anyway and isn't required for commit
cc57a2e90f.
Task-number: QTBUG-38536
Change-Id: I5fae12d646a4b2d2cc22b9f2d021e5dc8cfdda94
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Cocoa is not available on iOS, so the plugin should not be
built. But recent build system changes exposed that we did.
Change-Id: I000d54b330a075abb8f4a8b28a970bb5b5edfeb5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
After bbcdccd, a deprecation warning is written to
the console every time you run qmake on iOS.
This change will make use of the new QTPLUGIN.platforms=-
instead if the deprecated CONFIG -= import_qpa_plugin
Change-Id: I51e4f9d18f6abd87512a39b3236b89d5444fd6c1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the msys shell expects unix-like paths with drives converted
from d:\ to /d/.
Change-Id: I09e25ed2c868702e5d7d8b9cc8c04cc13410eeff
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
that is, make it match the shell used by the make command.
this is unlike DIRLIST_SEPARATOR and DIR_SEPARATOR, which always match
the actual system shell.
Change-Id: I0fb277d75b32be029808623a3b77e1358c4e265e
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
"system" refers to the system's native shell, which is what qmake's
system() invokes, and whose convention by far most commands invoked from
a makefile will need.
"shell" refers to the shell invoked by make, which diverges from the
system shell only when qmake/mingw32-make is called from an msys shell.
its conventions need to be used for anything the shell itself does
(e.g., assembling env variables, but also command line argument
unquoting) and the commands the mkspec sets according to the shell
(e.g., QMAKE_MOVE).
Change-Id: I0000aa9417c199cf8a810619d31ded24bb0675f9
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
at some point we stopped adding the qtmain's library path before its
respective -l flag, which lead to qmake being unable to resolve the
library location and thus ignoring its prl file.
Change-Id: I390a31f8ac2877d3823dfd2787b2cc8c696b0ec0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Increase window size when verifying that the scrollbar disappears
when using a small font on Windows 8.1
Change-Id: I7d4520bc5882d8ccd59db3f5bff7e9d6d68a4827
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Sometimes Qt wants to hide a widget without calling setVisible(false).
This is usually done by setting the widgets geometry outside the
parents clip rect (and usually by setting its y coordinate to a
sufficiently negative y coordinate). QSplitter uses this when it needs
to collapse its children.
Previously the QWindow was just moved straight above the QWidget it was
hosted in.
Task-number: QTBUG-38475
Change-Id: I154dd4d13f108c3d34c64eadb41dd6b477dc5c4e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
This allows the developer to provide a list of languages to the manifest
by listing them in WINRT_MANIFEST.languages. It also allows setting the
default language with WINRT_MANIFEST.default_language.
Task-number: QTBUG-38557
Change-Id: I5cb94c9f45146e3068d0833b9e669dc17dca14b2
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Aliased drawing has so far not been perfectly pixel aligned, resulting in
less than stellar output in some instances. Although a little hacky,
adding 0.5 to all coordinates when in aliased mode fixes things up nicely.
There doesn't appear to be a better way to get d2d to cooperate as we
would like it to.
Change-Id: I10ee494d2f576bfd0eca6d4429095a3726c0bf14
Reviewed-by: Risto Avila <risto.avila@digia.com>
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
It's declared in qtestcase.h as a function, so let's not declare the one
in qtestresult.cpp as a static variable. None of the variables in
qtestresult.cpp need to be in the QTest namespace, but we don't need to
change them now.
Change-Id: If6cc34642fdfe3ccda3b8cea7d053ead0db9ccbd
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QLoggingCategory objects are meant to be mere 'handles' for the
registry. It's therefore not recommended to
- manipulate them directly (via setEnabled()), except in a filter
- export them across module boundaries
- subclass them
Subclassing QLoggingCategory also breaks compilations in a certain
circumstances (no variadic macros).
Task-number: QTBUG-37283
Change-Id: Ib12fb43d955902c7fa4583296d64afc5eca01200
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For dynamic builds of ICU, libicudata is an implicit dependency. Anyhow,
it doesn't harm to explicitly link against it, either. So let's do
this everywhere ...
Task-number: QTBUG-38445
Change-Id: I420ba096e2ce5e1b8d81814ffb4aa7b300143b01
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Without these, a spew of connection warnings will occur when using HTTP
on Qt builds with QT_NO_NETWORKPROXY.
Change-Id: I330f6d98d1abdbadc57768dc48b8fab0ee1f6655
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
When the keyboard is told to hide, we resign first responder. If this
is done programatically on touch press, this will make the "hide keyboard
gesture" receive a touchesCancelled instead of a touchesEnded. Since we
didn't catch this from before, the gesture was left in a mixed state causing
the screen not to scroll when later showing the keyboard.
Change-Id: I70ed59710128a912097cd5bfbdd8f49b20b7934c
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
By only starting/ending drawing once in the backing store, we can avoid
multiple start/ends and thus flushes of the direct2d device context. This
can potentially be much faster with some drivers when many widgets that
draw to the same backing store need to redraw. Because starts/ends of
QWindowsDirect2DDeviceContext are already refcounted this works out of the
box.
Change-Id: Ib48edceef6a1041ae0509587c77ac0caa8b29fc6
Reviewed-by: Risto Avila <risto.avila@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
