Move the code from cleanup() into a separate cleanupTestData()
and call this from initTestData() and cleanup(). Remove slot init().
Change-Id: I4e7b5b89197ed0aa50f46f730e9c1d9c59749614
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
After canceling the asynchronous read operation, the
notified() slot receives ERROR_OPERATION_ABORTED.
We must not handle this situation as an error.
This amends commit 5ce567c5.
Task-number: QTBUG-48336
Change-Id: Iff948ceb3ad1f805a9de8c188fbc39ed4c76ba82
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Different multicast tests fail on different platforms for different reasons.
Blacklist them to get rid of insignificant and later fix/un-blacklist.
Change-Id: I91548366c7666478ea1cc446bbf337becfdefd49
Task-number: QTBUG-46612
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
As a follow-up for 5c1b9bbdf1 disable the
test on all platforms, since it fails on newer openssl. This was now
also happening on Windows, so until a fix is there, skip the test.
Change-Id: I6c8822c0ac5411b1114e9cd426219574ab1c9b54
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
A QAbstractSocket can be close()'d at any time, independently of its
current connection state. being closed means that we cannot use it to
read or write data, but internally it might still have some data to
send or receive, for example to an http server. We can even get a
connected() signal after close()'ing the socket.
We need to catch this condition and mark any pending data not yet
written to the socket for resending.
Task-number: QTBUG-48326
Change-Id: I6f61c35f2c567f2a138f8cfe9ade7fd1ec039be6
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
After calling connectToHost(), the socket enters HostLookup state. At this
stage, the socket engine was not created yet, and writing to the socket
should result in either data buffering or an error. So, add a check for
d->socketEngine to prevent a crash on unbuffered sockets.
Task-number: QTBUG-48356
Change-Id: I15ea9ce7de97ce6d7e13e358eca5350745b556bb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Use QVERIFY2() with QTemporaryDir/File::errorString() consistently.
Attempt to catch issues like the below warning and follow-up issues.
QSYSTEM: tst_QFiledialog::clearLineEdit() QFileSystemWatcher: FindNextChangeNotification failed for "C:\Users\qt\_____aaaaaaaaaaaaaaaaaaaaaa" (Access is denied.)
Task-number: QTBUG-47370
Change-Id: I58a6e87c502627e976efa62ad73c912f3b2d49fa
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
There was a small amount of time between the last readDatagram() call
and disabling a read notifier in case the socket had a pending
datagram. If a new datagram arrived in this period, this qualified as
absence of a datagram reader. Do not change the read notifier state
because it is disabled on canReadNotification() entry and always enabled
by the datagram reader.
Thanks to Peter Seiderer, who investigated the same: "Querying
hasPendingDatagrams() for enabling/disabling setReadNotificationEnabled()
is racy (a new datagram could arrive after readDatagam() is called and
before hasPendingDatagrams() is checked). But for unbuffered sockets the
ReadNotification is already disabled before the readReady signal is
emitted and should be re-enabled when calling read() or readDatagram()
from the user."
However, this patch does not completely solve the problem under Windows,
as the socket notifier may emit spurious notifications.
Task-number: QTBUG-46552
Change-Id: If7295d53ae2c788c39e86303502f38135c4d6180
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This commit changes the readDatagram() and writeDatagram() virtual
functions to take a QIpPacketHeader as meta data, instead of a
QHostAddress/quint16 pair. As previously, the header is an "out"
parameter for readDatagram() and an "in" parameter for writeDatagram().
The header pointer in readDatagram() is allowed to be null if the
PacketHeaderOptions indicates WantNone. Otherwise, it must not be null.
The extra options parameter is introduced because we may not always want
all the metadata upon reception. For sending, we know what to include or
not based on what's set in the incoming header parameter.
QIpPacketHeader splits sender and destination because we'll be able to
return both on datagram reception.
Change-Id: Iee8cbc07c4434ce9b560ffff13ca4213255008c7
Reviewed-by: Richard J. Moore <rich@kde.org>
Mostly related to IPv6, because Q_IPV6ADDR is an array of char, so the
compilers were generating byte access to each value. Instead, force
access as 32- and 64-bit in most places that make sense (64-bit access
decays to 32-bit on 32-bit machines). In one isLoopback(), this is now a
128-bit access for best improvement.
Some smaller improvements relating to SpecialAddress by combining the
three IPv4 special addresses.
Change-Id: I7de033f80b0e4431b7f1ffff13f932b1cd7b5d21
Reviewed-by: Richard J. Moore <rich@kde.org>
This complements QHostAddress::isLoopback. The only missing check now is
for the "Any" address types, though operator== is quite fast nowadays.
Change-Id: Iee8cbc07c4434ce9b560ffff13cc2691e15014b6
Reviewed-by: Richard J. Moore <rich@kde.org>
The test is very flakey in 5.5 integrations and the OS X CI machines have
notorious problems with networking stability. So the previously listed tests
are not really at fault, it's an infrastructure problem, that we choose to
ignore for the time being.
Change-Id: I7fbfa7b3778daa6b5e60d95b822847c92927122f
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
SecureTransport does not implement QSslCertificatePrivate thus some
tests relying on generic version fail. Skip them for now.
Change-Id: I483340b37786a8a556e954b2c538e4f48a342be9
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
A couple of test always fail on OS X/iOS with SecureTransport
(simply not implemented yet).
Change-Id: Idd82262512938c36b657b497751738fdc804c182
Reviewed-by: Jeremy Lainé <jeremy.laine@m4x.org>
Reviewed-by: Richard J. Moore <rich@kde.org>
Also removed the XFAIL from connectToUnresponsiveHost
Change-Id: Ie0f5685a8fa437c00d22f9e76b51ac61347ce03b
Task-number: QTBUG-15111
Reviewed-by: Caroline Chao <caroline.chao@theqtcompany.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: Icaa1edafcc6e2779fbd6dbc2c058544d6e07f1e9
Reviewed-by: Richard J. Moore <rich@kde.org>
The QSslCertificate tests only covered certificates with RSA keys, this
extends the test coverage to DSA and EC keys.
Change-Id: Ibee26f449cf6c1d97cbac6b511972eb44d6f0bd2
Reviewed-by: Richard J. Moore <rich@kde.org>
The comment about non-OpenSSL backends not reproting a specific error
for self-signed certificates contained a typo, this fixes it.
Change-Id: I3010981d5d87d68ebf5e984c003b8bbbfb019b96
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
Non-OpenSSL backends are not able to report a specific error code
for self-signed certificates.
Change-Id: I56bf130335b2afa65cf2bd5248a40ac0e32f74c2
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Fix warnings:
tst_qtcpsocket.cpp:245:9: warning: private field 'numConnections' is not used [-Wunused-private-field]
int numConnections;
^
tst_qtcpsocket.cpp:1834:9: warning: private field 'exitCode' is not used [-Wunused-private-field]
int exitCode;
tst_qcheckbox.cpp:86:10: warning: private field 'tmp' is not used [-Wunused-private-field]
uint tmp;
^
tst_qcheckbox.cpp:88:10: warning: private field 'tmp2' is not used [-Wunused-private-field]
uint tmp2;
Below warning is caused by code #ifdefed for OS X only, make it a local variable:
tst_qlabel.cpp:114:16: warning: private field 'test_edit' is not used [-Wunused-private-field]
QLineEdit *test_edit;
Change-Id: I53c755545fe2e7ca1f053f40c8c0e50aec2efcdd
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
Preparing the replacement of Q[TRY]_VERIFY(a == b) by
Q[TRY]_COMPARE(a, b) for non-boolean types.
Change-Id: Iab6ec2f0a89a3adc79e18304573994965013dab5
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
This adds an OpenSSL-based implementation of the QSslKeyPrivate encrypt
and decrypt method. This puts both the OpenSSL-based and non-OpenSSL
backends (WinRT for now) on par.
Change-Id: I18a75ee5f1c223601e51ebf0933f4430e7c5c29b
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
I'm getting an error with WSARecvFrom in nativeBytesAvailable() and I
don't know why. The number of bytes obtained is correct and the test
works for 2 bytes, so let's use that.
The Windows nativeBytesAvailable() function has a comment saying that
WSAIoctl sometimes indicates 1 byte available when there's a pending
error notification, so that function proceeds to do a WSARecvFrom to
peek the number of bytes. Somehow that function in this test is getting
a SOCKET_ERROR I can't explain.
Change-Id: Ic5b19e556e572a72a9df9a405b1fee3b7efb8b24
Reviewed-by: Richard J. Moore <rich@kde.org>
The test is crashing regularly (see bugreport).
Currently the test is not run in the regular CI system, that is why
the failures were not noticed.
Task-number: QTBUG-47128
Change-Id: I70d4ada0872316cc63d7629bb9ab2d055d70cf2a
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
This is a fix-up for cff39fba10.
That patch lead to some internal state issues that lead to the QTBUG-47048
or to QNetworkReply objects erroring with "Connection Closed" when
the server closed the Keep-Alive connection.
This patch changes the QNAM socket slot connections to be DirectConnection.
We don't close the socket anymore in slots where it is anyway in a closed state
afterwards. This prevents event/stack recursions.
We also flush QSslSocket/QTcpSocket receive buffers when receiving a disconnect
so that the developer always gets the full decrypted data from the buffers.
[ChangeLog][QtNetwork] Fix HTTP issues with "Unknown Error" and "Connection Closed"
[ChangeLog][QtNetwork][Sockets] Read OS/encrypted read buffers when connection
closed by server.
Change-Id: Ib4d6a2d0d988317e3a5356f36e8dbcee4590beed
Task-number: QTBUG-47048
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Conflicts:
src/plugins/platforms/cocoa/qcocoafiledialoghelper.h
Manually fixed src/testlib/qtestcase.cpp to return the right type.
Change-Id: Id1634dbe3d73fefe9431b9f5378846cb187624e4
They didn't show up in the "old" CI runs because they usually pass the second
time they are executed - which the testrunner does. The new CI doesn't do that
anymore, instead we now mark those tests explicitly and will track their record
of passing and failing in the new metrics database.
Change-Id: Id34dd6f792f38995b07b6fec88f833df64de2f8b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
QSslConfiguration is better suited for these APIs. The ones
in QSslSocket that already have a counterpart have been deprecated.
[ChangeLog][QtNetwork][SSL/TLS Support] Most of the QSslSocket
functions to deal with ciphersuites, certification authorities
as well as elliptic curves have been deprecated in favor of the
corresponding counterparts in QSslConfiguration.
Task-number: QTBUG-46558
Change-Id: I1de03379efcbcab931c20e876e252769fe4279e0
Reviewed-by: Liang Qi <liang.qi@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Jani Heikkinen <jani.heikkinen@theqtcompany.com>
