These expressions only work because they contain no non-parenthesized
commas and an int literal is last.
Fix by wrapping only the integer literal in Q_(U)INT64_C.
Change-Id: I6b8e508b6c7c022f4b3342f65c26aab89ce17702
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Move those to the equivalent {to,set,from}SecsSinceEpoch(), except for
the cases that did QDateTime::currentDateTime{,Utc}().toTime_t. Those
are best implemented with QDateTime::currentSecsSinceEpoch().
Change-Id: Ib57b52598e2f452985e9fffd145a366c92cfda20
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
... and reject invalid ones. There was one error: we accepted schemes
starting with pluses, dashes and dots.
Change-Id: Ie585843cfb684bc3b6e3fffd145cfe12227ec4ad
Reviewed-by: David Faure <david.faure@kdab.com>
A Qt5 program writing a null QTime() using setVersion(QDataStream::Qt_3_3),
and then a Qt3 program reading that, would lead to a weird QTime,
with isNull=false, isValid=false, hour=1193, minute=2, second=47, ms=295.
This commit restores interoperability, by writing out the expected value
(0) for a null QTime rather than the -1 value used by Qt4 and Qt5.
Change-Id: Icde468a8f6fc9434ef7018296725819b44d672af
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's really a kernel functionality, as it implements really low-level
functionality and it's used by the event dispatcher. It was in tools/
only because QTime is.
QDeadlineTimer is also coming to kernel/.
Change-Id: Ifea6e497f11a461db432ffff14491c6d9b839eb0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Serialization of the Qt container classes is accomplished by breaking
up the data into primitive units. On the receiver side, these units
should be read atomically to guarantee integrity of the container.
Deserialization procedures for QHash and QMap were already implemented
in accordance with this strategy and have the following behavior:
- a previously latched error status is saved for the caller. This
overrides possible different errors in the current read. This
is consistent with the treatment of primitive types.
- if an error occurs during the deserialization, the container is
cleared.
To make the API consistent, this patch adjusts the behavior of QList,
QLinkedList, QVector, and QSet deserialization. On the implementation
side we accomplish this with a private StreamStateSaver RAII class that
consolidates the handling of the stream status for all containers.
[ChangeLog][Important Behavior Changes][QtCore][QDataStream] Incomplete
reads of Qt containers are now handled same way as for primitive types,
meaning that previous errors are latched.
Task-number: QTBUG-54022
Change-Id: I5c77257fe2a4637e8a7e6cf3cd43091c8469340e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
to keep compatibility with and without
using QT_USE_QSTRINGBUILDER.
Change-Id: If8218fe0693cdb7ad1250beb272e0e7c356bbf4a
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
These new functions use a 64-bit integer in the API, instead of the
broken 32-bit unsigned integer that the previous xxxTime_t functions
used. That was a design flaw when the API was introduced back in Qt 4.2,
so I'm deprecating the API and slating it for removal in 6.0.
The changes to qfilesystemmetadata_p.h and quuid.cpp are necessary to
build the bootstrap library. The rest of the adaptation to the new API
will come in the next commit.
[ChangeLog][QtCore][QDateTime] Introduced toSecsSinceEpoch,
fromSecsSinceEpoch and setSecsSinceEpoch functions, which use 64-bit
integers to represent the number of seconds.
[ChangeLog][QtCore][QDateTime] The toTime_t, fromTime_t and setTime_t
functions are deprecated and will be removed in Qt 6.0. For new code,
use the equivalent functions with "SecsSinceEpoch" in the name, or the
equivalent ones with millisecond accurancy that have existed since
Qt 4.7.
Change-Id: Ib57b52598e2f452985e9fffd145a355d0e7ff48d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Otherwise, the code:
ds >> s >> hash;
could set the stream status to ReadPastEnd, while deserialization
of the string is failed with ReadCorruptData status.
Proposed solution is to restore a previously latched error status
unconditionally in accordance with QDataStream::setStatus() docs.
Change-Id: Id3a7dccf709b02e5b018efb48d7647ee48fe5124
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The first is "exact", not "more": qCalculateBlockSize. It ensures that
there's no overflow in multiplying, adding the header size or when
converting back to an int.
The second is the replacement for qAllocMore: it calculates the block
size like the first, but increases the block size to accommodate future
appends. The number of elements that fit in the block is also returned.
Task-number: QTBUG-41230
Change-Id: I52dd43c12685407bb9a6ffff13f5da09f816e667
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The implementation used the QString::compare_helper(QChar*, int, char*, int)
overload, which, however, interprets the rhs as a UTF-8 sequence, not as
Latin-1.
Fix by using the (QChar*, int, QLatin1String) overload.
Extend the test to cover this case, too.
Change-Id: I59b26d63d0caec036b80ef8818c75d0cebe519d2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since Qt 5.0.0 we never built the test plugins on Windows, because we
checked for the existence of QtCore[d]4.dll, and the actual test does
not complain if it cannot find any plugins.
Use the right conditions to check for debug/release Qt builds on
Windows. Use subdirs dependencies on every platform and then actually
pass the right variable to SUBDIRS. Clean up the pro file while we're at
it.
Change-Id: I099f30afd445fbf43dc5677d256ffe55b27639b3
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This reverts commit 55655abfaf.
The crashes in release mode cannot be locally reproduced.
Change-Id: I4e7b1defbeac5d5512b2fa82a367d2e04e3c37a4
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
This reverts commit b373d183de.
The crashes in release mode cannot be locally reproduced.
Change-Id: I38ff5e9e045cff0e94e24ca07fb6e18e88b677c7
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
When using a 8 bit encoding to write a file, a test discovers if the
encoding is really ASCII compatible by examining a letter and one of the
XML reserved characters. EBCDIC, in the current base, was not well
handled.
[ChangeLog][QtCore][QXmlStreamWriter] Fixed a bug that prevented the
generation of valid XML files when using encoding with 8 bit per
character but not ASCII compatible. QXMLStreamWriter generated XML
markup using always ASCII in this case.
Change-Id: I9c86a122dd91b2290d50c358638442f99777d4ae
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Commit 9ef3ff30 introduced a new function, putUcs4(), to
output QChar, char16_t, char32_t as a, possibly escaped,
character literal, but got the order of stream modifiers
wrong. Instead of applying the field width to the 'ucs'
streaming, it applied it to the prefix '\u'. The same
problem exists for the pad char, leading to the result
'00\ue4'
for a QChar containing
ä (LATIN SMALL LETTER A WITH DIAERESIS)
Fix by reordering the elements streamed so that the
prefixes come last.
Added a test.
Change-Id: I6eaa0586501b9e780aaa3bb5dcec0e5c2f86a219
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As in 032efc2cb2, which added the
API-symmetry test, define the missing relational operators
locally in the test harness until they are fixed in the library.
Change-Id: Ic2688e6b6b3e028a9c29f1a5eb01058375ef3fe9
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Some constructors were added, but the comparison operators were missing.
The STL has them, so we ought have them too.
Change-Id: I030c14a3b355988f509716b4b1b1a835b3ab9481
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Limit the macro #ifdefery and allow for more test cases.
Task-number: QTBUG-53712
Change-Id: I2c185efc7c3b8fcd0217d2021bd98ab6044b5aee
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The test leaks a file (named qt_...xxx) in QDir::tempPath(). Moreover,
when tests fail, it can happen that more files are leaked and subsequent
runs do not recover since the check for non-existence of those files fails.
Change-Id: Iaea6d09ee7c271903a1b9c63e263c19f9e90bba9
Reviewed-by: David Faure <david.faure@kdab.com>
Now that the minimum deployment target (and thus SDK) is 10.9 for OS X
and 7.0 for iOS, all code paths affecting platform versions lower than
the aforementioned are removed.
Change-Id: Id985c7259c4ac069319d88f2c29c9559ae9e8641
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Remove every usage of the _WIN32_WCE macro outside of 3rd party
source code directories.
Change-Id: Ia7e859bd6dcaef10c66674612c8e440f9a2dee56
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Revert 6225eff73f and
a8ad67e939 as the proper fix for this is
merged.
Change-Id: I1c8db99d0efade91fbfd078f7d700c87f3848132
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
...if a PMF connection had already happened. Since UniqueConnection
isn't implemented for non-PMFs (functors and lambdas aren't comparable,
even if static member functions or non-member functions are), we pass a
null pointer for comparison argument. The disconnect() code already
protected against a null pointer there, but not the connect code path
with Qt::UniqueConnection
Change-Id: I87e17314d8b24ae983b1fffd145324beced0494d
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Dario Freddi <dario.freddi@ispirata.com>
To get QtWayland in, we need to blacklist constructing_QTcpSocket test
Task-number: QTBUG-53662
Change-Id: I056547e74c7a46cf3e97f08399328ab2e684caad
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
To get QtWayland in the CI, we need to blacklist this test
Task-number: QTBUG-53665
Change-Id: I55b64a5d7f9444aa5ea73823a60c4cb9c88c31b7
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
The stream in question is from prior to Qt 5.0 release, before
commit 718a2251be changed QDateTime
serialization format to store Qt::TimeSpec instead of the private
flag. The last byte was 0xff meaning LocalUnknown, but 0xff is
not valid in Qt 5.0.
It was just garbage that Qt up to now just accepted. With the upcoming
short QDateTime optimization, the results are worse.
Change-Id: I25d85d86649448d5b2b3fffd1450f57df17e7794
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
POSIX.1-2001 allows quoting a zone name so that it can contain other
characters besides letters, by enclosing it in angle brackets ('<' and
'>'). This hadn't been used until recently (tzdata2016b), when the
Asia/Barnaul rule started using a zone name "+07" (the name variable
contained the value "<+07>-7").
Thanks to Paul Eggert for reporting and investigating the root cause.
Task-number: QTBUG-53071
Change-Id: Id5480807d25e49e78b79ffff1449bc410776cb66
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Makes it easier to apply similar changes across all related functions,
and to implement functions for new types by having the previous
approaches available in one place.
Change-Id: I3f0590d67d0e6deb1c6c856ab1de96b55b6af058
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Pass -xplatform macx-tvos-clang to configure to build.
Builds device and simulator by default.
Added ‘uikit’ platform with the common setup.
Also added QT_PLATFORM_UIKIT define (undocumented).
qmake config defines tvos (but not ios).
tvOS is 64bits only (QT_ARCH is arm64) and requires bitcode to be
embedded in the binary. A new ‘bitcode’ configuration was added.
For ReleaseDevice builds (which get archived and push to the store),
bitcode is actually embedded (-fembed-bitcode passed to clang). For all
other configurations, only using bitcode markers to keep file size
down (-fembed-bitcode-marker).
Build disables Widgets in qtbase, and qtscript (unsupported,
would require fixes to JavaScriptCore source code).
Qpa same as on iOS but disables device orientation, status bar, clipboard,
menus, dialogs which are not supported on tvOS.
Change-Id: I645804fd933be0befddeeb43095a74d2c178b2ba
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
QVariant::canConvert<Enum> was returning true for everything can can be converted
to integer, but not for integer itself. That's because in QVariant::canConvert
we set the targetType to Int of it's an enum, but the Int->Int case was not
on the conversion matrix. So this commits adds it to the conversion matrix
and now QVariant::canConvert<Enum> returns consistently true for int itself.
But even tough canConvert returned true, it did not actualy do any conversion
to the enum type itself. Fix that by handling the case properlt in 'convert'
[ChangeLog][QtCore][QVariant] Fixed QVariant::canConvert and conversion from
integer types to enumeration types.
Task-number: QTBUG-53384
Change-Id: I6ac066f3900e31bfcea7af77836ddfc7730bd60b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
So we know what we're looking at if there's a test failure. This is like
QNetworkInterface.
Change-Id: Id75834dab9ed466e94c7ffff1444bf51f615e944
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QXmlStreamReader also has QLatin1String overloads, which
greatly benefits parsers, since the vast majority of keys
in both JSON and XML are US-ASCII. This patch adds such an
overload to the JSON parser.
The value() function is all typical parsers need, so even
though many more QJsonObject functions taking QString could
benefit from the same treatment, value() is the single most
important one for read-only JSON access.
Add some more overloads, too, for functions that don't need
more internal scaffolding than value(). Requires adding a
dummy op[](QL1S) (forwarding to the QString overload) so as
not to make
QJsonObject json;
json[QLatin1String("key")]; // mutable
ambiguous between const op[](QL1S) and mutable op[](QString).
[ChangeLog][QtCore][QJsonObject] Added value(), op[] const,
find(), constFind(), contains() overloads taking QLatin1String.
Change-Id: I00883028956ad949ba5ba2b18dd8a6a25ad5085b
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The path "/usrfoo" starts with "/usr", so if you tried to get
QStorageInfo("/usrfoo") when "/usr" is a mount point, you'd get the
wrong filesystem.
[ChangeLog][QtCore][QStorageInfo] Fixed a bug that caused QStorageInfo
to report information for the wrong filesystem if there is a mounted
filesystem at a path that is a prefix of the requested path (e.g., it
would report "/usr" filesystem for "/usrfoo").
Task-number: QTBUG-49498
Change-Id: I3e15a26e0e424169ac2bffff1417b7a27cd0132d
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
The C and C++ standards say it's undefined whether the preprocessor
supports macros that expand to defined() will operate as an ifdef.
Clang 3.9 started complaining about that fact.
One solution was to change QT_SUPPORTS to check for zero or one, which
means we need to change the #defines QT_NO_xxx to #define QT_NO_xxx 1.
The C standard says we don't need to #define to 0, as an unknown token
is interpreted as zero. However, that might produce a warning (GCC with
-Wundef), so changing the macro this way is not recommended.
Instead, we deprecate the macro and replace the uses with #ifdef/ndef.
Change-Id: Id75834dab9ed466e94c7ffff1444874d5680b96a
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test should not depend on qWait explicitly
Change-Id: I13c01c47c9f7bae8b0c30afa2ac8550dc0fbf028
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
newer versions of qt creator understand QMAKE_EXTRA_COMPILERS and
INSTALLS, so there is no need to list the files twice.
Change-Id: Iccf3cc3248daf3422b8c366c2eb2d2f46c5f08d1
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
On some operating systems, tzdata files carry the Local Mean Time (LMT)
for the city in question, which better represents how time was tracked
before standard, hourly timezones were introduced in the early 20th
century. The test was asking for the data for 1653-02-09 and assumed
that it would find the first Central European Time (CET) rule, which
Germany didn't start using until 1893-04-01.
This fix allows us to remove the blacklist that had been applied to this
test without investigation. It wasn't related to OpenSUSE, aside from
the fact that OpenSUSE tzdata carries the LMT data.
Change-Id: Id5480807d25e49e78b79ffff1449bdaf46901367
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Where "correct" is defined by what std::shared_ptr does as well as what
happens when an intermediate QSharedPointer of the exact type of the
constructor behaves
That is,
QSharedPointer<X> ptr(new Y);
Behaves like
QSharedPointer<X> ptr;
{ QSharedPointer<Y> tmp(new Y); ptr = tmp; }
Change-Id: Id75834dab9ed466e94c7ffff14455d445f72592b
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
[ChangeLog][QtCore][QLibraryInfo] Added QLibraryInfo::version(), which
returns the current version of the Qt library as a QVersionNumber
object.
Change-Id: Ifea6e497f11a461db432ffff1448d4dc84ef57b1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Since they are non-characters and should not be used for text
interchange, it stands to reason that they should not appear in
unencoded for in a URL. To change the behavior, we just need to toggle
a simple flag for QUtf8Functions.
This behavior also matches the recommendation from RFC 3987. We do not
usually follow recommendations from that RFC (as it is generally
believed to be a bad RFC), but this one seems like a good idea.
Change-Id: Ifea6e497f11a461db432ffff1447486c623c12bd
Reviewed-by: David Faure <david.faure@kdab.com>
The "path" of a mailto URL isn't a file, so we shouldn't try to do
glob-based matching. I was getting application/x-ms-dos-executable
for a .com domain and application/x-perl for a .pl domain...
Change-Id: Ifc346c3bba83ba1a8476db3202492f4c2e4d52bb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
std::shared_ptr supports it. To resolve an ambiguous overload when a
literal 0 is passed as a parameter, the normal constructors needed to be
made a template, like std::shared_ptr.
Task-number: QTBUG-52569
Change-Id: Id75834dab9ed466e94c7ffff14451417892d2148
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
When the formatting parameter wasn't exactly QUrl::EncodeUnicode, it
wouldn't encode, despite having to.
Change-Id: Id75834dab9ed466e94c7ffff1444bacc08dd109b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
The RFC does allow it. It even has examples showing them as valid. In
section 6.2.3, it shows:
http://example.comhttp://example.com/http://example.com:/http://example.com:80/
Change-Id: Id75834dab9ed466e94c7ffff1444b7195ad21cab
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
The behavior was different in the variadic template code and in the C++98
code. The code without variadic template support was not copying the functor
object (e.g. a lambda) before calling it.
However, in the variadic template section, QtPrivate::FunctorCall::call
took the functor by value instead of by reference resulting in a copy.
QtPrivate::FunctorCall::call is a helper function for
QtPrivate::FunctionPointer::call which is only needed for variadic template
expension.
[ChangeLog][QtCore][QObject] If the compiler supports variadic templates,
no longer copy functor connected to a signal each time the signal is
emitted. Restoring the C++98 behavior.
Task-number: QTBUG-52542
Change-Id: I3ca20ef6910893b8a288e70af7de4c7b69502173
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The header defined a macro QTEST_NO_CURSOR depending
QT_NO_CURSOR or obsolete platforms Windows CE and Meego.
Replace usages by QT_NO_CURSOR in the tests.
Change-Id: I3edac88e684d1f932dd3b721bb1c1b3fe9144237
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Before this change QFile::errorString function was returning an
"Unknown error". Now it will return the typical ENOENT string.
Task-number: QTBUG-45259
Change-Id: Ib7634f1aa5d91f77151cf92c58d3956e20a4cc6b
Reviewed-by: hjk <hjk@theqtcompany.com>
(for instance any global object which writes out to a config file in the
destructor). If the global cache isn't available anymore, don't use it.
Change-Id: I851a6e394d0b073aebf3ffd88b1966d424bfb92e
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Add some extra checks to the parser to make sure that addresses
like "300-05" aren't interpreted as valid IPv4 addresses.
Change-Id: I12475eebc9452e060779bb05e2b4ad9512a28281
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
* A bunch of fixes and additions to the locale data
* Add new scripts from Unicode 8.0 and 9.0
* Map some potentially useful languages and territories
[ChangeLog][QtCore] QLocale data updated to CLDR v29
Change-Id: I759ccb27fe19be2722be913c5c2e6aa5f36e5c14
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Most containers have them in Qt 5.7, so add them
to QStringRef, too.
Brush up the docs, use the const_iterator typedef
in the API, for consistency with QString's docs.
[ChangeLog][QtCore][QStringRef] Added reverse iterators,
rbegin(), rend(), crbegin(), crend().
Change-Id: I3d2884a1b2faae02c610ab3871552b65bc6e2521
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Instead of relying on the QString relational operators to
implicitly convert the QChar to a QString, add relational
operator overloads that compare the QChar without first
turning it into a QString, saving one memory allocation
per comparison, and allowing to mark the operation as
nothrow.
Consequently, in tst_QStringBinOps, verify now that all
relational operations are noexcept.
The added overloads make QChar ==/!= int comparisons
ambiguous. De-ambiguate by providing a constrained
template that matches int and nothing but int (otherwise,
the QChar and the int versions would compete for a
QChar::SpecialCharacter argument, and end up creating
new ambiguities). This solution may not be perfect, but
it can be easily extended should more ambiguities crop up.
The existing overload deals with all patterns found in
qtbase.
Change-Id: I4156d918e9b9134c1da684b8b69e0ee526ad24e3
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
For QChar <> QStringRef, equality and inequality were already provided
(via QChar -> QString implicit conversions, to be fixed in a separate
patch). Missing were the less/greater than (or equal) operators.
Added.
For QChar <> QLatin1String, all relational operators were missing.
Added, too.
[ChangeLog][QtCore][QChar] Added missing operator{<,>,<=,>=}
comparing against QLatin1String and QStringRef.
[ChangeLog][QtCore][QChar] Added missing operator{==,!=}
comparing against QLatin1String.
Change-Id: I9941fe7e7281ea560b3bd5970cb9651ffadc1495
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The flags here are passed to a private QVariant constructor, and they
really represent a boolean - IsPointer or not.
Because the flag for the key_type was incorrectly populated with the
flag for the value_type, memory would be corrupted when using a mapping
type whose value_type is a pointer, but whose key type was not, such as
QMap<QString, int*>
This typo has been there since the concept was introduced in commit
v5.2.0-alpha1~807 (Add container access functionality for associative
containers in QVariant., 2013-04-05).
Task-number: QTBUG-52246
Change-Id: I9ecb13c603015eed2dc2ca43947fa0ecd6be8b5a
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
People use this, so make sure there's a test for it.
I don't expect this test to fail, but static and
dynamic checkers should be presented with this
use-case, so they have a chance of warning, because
certain implementation strategies of QPointer may
make this code undefined.
Change-Id: I334bd73204ba4e186c4098fc6b7188917407e020
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Removing blacklistings from tests that are now passing.
Change-Id: I00aa1ce286d3e7715fb4bee4a36d0d77049a29ae
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
Cleaning out the workarounds for the discontinued "Embedded Android"
platform of Boot2Qt.
Change-Id: I0ff9d770e82a43457fb7e5da0428f4597ead4038
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Update files using old header.LGPL3 to header.LGPL
Update files using old FDL template to use new one
Update files using old BSD template to use new one
Change-Id: I36a78272516f9953d02956522f285b40adfc8915
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The previous implementation overwrote multiple 'time' parts in the
qSetMessagePattern with the last setting in the pattern line.
%{time}%{time process}%{time boot} ended up to be output as if
%{time boot}%{time boot}%{time boot} was set.
This fix keeps the arguments of each individual 'time' part.
The same holds for multiple 'backtrace' parts. The previouse
implementation overwrote multiple 'backtrace' arguments with the
arguments of the last occurrence.
This fix keeps the individual arguments for the 'process' parts.
The individual arguments are applied in qFormatLogMessage.
A new test to verify the individual 'time' arguments application
is added, too.
Task-number: QTBUG-51944
Change-Id: Ib757614a482c5f31ed0a61b550daa2eea4b907b4
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Drop addSub() test. It executes exactly the union of fetchAndAdd()
and fetchAndSub(), which have already had their UBs fixed.
No need to do fixes in duplicated code.
Change-Id: Ib72caab0310fce3ff9a40c261d8a38518f91ecaf
Reviewed-by: David Faure <david.faure@kdab.com>
This patch adds a new option, QCommandLineOption::ShortOptionStyle, which helps
applications (such as compilers, so moc and now qdoc) which need to mix long-style
and short flags.
[ChangeLog][QtCore][QCommandLineOption] Added flags() and setFlags() methods.
Added ShortOptionStyle and HiddenFromHelp flags.
Change-Id: I944ce56aff2b28ecd6bb9d2d23c4e726e9d06647
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The spawn code was only used to make QProcess work on QNX 6.5.0. Fork
works on QNX 6.6.0. The QNX spawn implementation has a flaw that causes
a deadlock in certain situations. When a working directory is specified
for the process, the QNX spawn implementation stops all threads except
the one doing the spawn so that it can temporarily change the process'
working directory. This can lead to a deadlock if the thread does
anything that conficts with something being done in a stopped thread.
QNX 6.5.0 is no longer supported in Qt 5.6.0 so we can just switch QNX
to the fork implementation and get rid of the spawn implementation.
Made a QNX specific adjustment to the hardExit test. There's a bug
in the OS that the test can run into because it does something that
normal applications wouldn't.
Task-number: QTBUG-47250
Change-Id: Ib32567d2c15ce651815858000035ac5aa6f35224
Reviewed-by: Dan Cape <dcape@qnx.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Math functions are linked in by default on INTEGRITY.
Change-Id: I737ae87c02b2321caca3975f69525731e839d1a7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Previously WinRT was using the UTC backend which fails on all platforms
for some QDateTime autotests related to timezone items. Hence switch to
the Windows implementation for WinRT as well.
However, the windows backend does query the registry heavily, which is
not supported on WinRT. Instead use the API version provided by the SDK.
Long-term we might want to switch to this version on desktop windows as
well, as direct registry access would not be required and we could
harmonize the codepaths for both platforms.
Change-Id: I620b614e9994aa77b531e5c34c9be1da7e272a30
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
A test should not write to its directory.
Change-Id: I34dfc36387cf5a637b325be29c8a19ff51d9b9c3
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
For platforms with builtin testdata/sandboxed platforms we need to
change the current directory to be able to create files.
Change-Id: I440205c95dd6df1308c6bf24b1b0f67fd697feab
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Equality and inequality were already provided. Missing were the
less/greater than (or equal) operators.
Added.
Moved existing functions around and more similar to the new ones,
to make the whole code section a bit more manageable.
[ChangeLog][QtCore][QStringRef] Added missing operator{<,>,<=,>=}
comparing against QLatin1String and QString.
Change-Id: Idb3c4fa9b38421637987226f3cc1b77f5d4a6309
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
This is analogous to QObject::inherits() but only requires the
metaobjects rather than pointers to a QObject instances. This is needed
for type checking on the backend of Qt 3D where we do not have access
to QObject pointers.
Change-Id: I14d26c4cbb5cc3fbecb57725f2c14ee0ffda4a11
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Milian Wolff <milian.wolff@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
QRect::center() should be defined for any
QRect(x1,y1,x2,x2), INT_MIN <= x1, x2, y1, y2 <= INT_MAX
because the average of two signed integers is always
representable as a signed integer.
But not when it's calculated as (x1+x2)/2, since that
expression overflows when x1 > INT_MAX - x2.
Instead of playing games with Hacker's Delight-style
expressions, or use Google's patented algorithm, which
requires two divisions, take advantage of the fact that
int is not intmax_t and perform the calculation in the
qint64 domain. The cast back to int is always well-
defined since, as mentioned, the result is always
representable in an int.
Fix a test-case that expected a nonsensical result due
to overflow.
[ChangeLog][QtCore][QRect] Fixed integer overflow in
center(). This fixes the result for some corner-cases
like a 1x1 rectangle at (INT_MIN, INT_MIN), for which
the previous implementation could return anything
(due to invoking undefined behavior), but commonly
returned (0, 0).
Change-Id: I1a885ca6dff770327dd31655c3eb473fcfeb8878
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The compiler can statically check that this is undefined
behavior:
tst_qrect.cpp:3173:52: warning: integer overflow in expression [-Woverflow]
<< QRect(QPoint(0,0), QPoint(INT_MAX+(0-INT_MIN),INT_MAX+(0-INT_MIN)));
~^~
tst_qrect.cpp:3173:72: warning: integer overflow in expression [-Woverflow]
<< QRect(QPoint(0,0), QPoint(INT_MAX+(0-INT_MIN),INT_MAX+(0-INT_MIN)));
~^~
Fix by skipping the test (like most of the others are
in the block).
Change-Id: I359a5e16db6c660c9f11d7dd8fbb40730bd63887
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
At the moment, only checks the relational operators, where
it already found some which do not compile. In order to
simplify the test, the missing operators are supplied by
the test harness until they are fixed in the library.
Change-Id: Ief5daefa68f15de5f8e559c9378ed83b715b69ee
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
This change partially reverts 1bfc7f68 about QT_HAS_BUILTIN define
and undef in src/corelib/tools/qsimd_p.h.
This change is also squashed with "Fall back to c++11 standard
compiler flag for host builds" which is done by Peter Seiderer.
Conflicts:
mkspecs/features/default_post.prf
src/3rdparty/sqlite/0001-Fixing-the-SQLite3-build-for-WEC2013-again.patch
src/3rdparty/sqlite/sqlite3.c
src/corelib/tools/qsimd_p.h
src/gui/kernel/qevent.cpp
src/gui/kernel/qwindowsysteminterface.cpp
src/gui/kernel/qwindowsysteminterface_p.h
src/plugins/bearer/blackberry/blackberry.pro
src/plugins/platforms/cocoa/qcocoasystemsettings.mm
src/plugins/platformthemes/gtk2/gtk2.pro
src/plugins/styles/bb10style/bb10style.pro
src/sql/drivers/sqlite2/qsql_sqlite2.cpp
tools/configure/configureapp.cpp
Task-number: QTBUG-51644
Done-with: Peter Seiderer <ps.report@gmx.net>
Change-Id: I6100d6ace31b2e8d41a95f0b5d5ebf8f1fd88b44
A test should not write to its directory. Amends change
d0b54cede8.
Task-number: QTBUG-47176
Change-Id: If15258b4aed199792fab422b7ac1d74e22a9e322
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@theqtcompany.com>
Signed integer overflows and underflows are undefined
behavior. A test that invokes UB tests nothing, because
the standard permits any outcome.
Fix by guarding the respective operations so
they are not executed if they would overflow
or underflow.
Change-Id: I40354ee88f40e4b47b70eac7790dc3a79ac70a57
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
As found by GCC 6:
tests/auto/corelib/kernel/qmetatype/tst_qmetatype.cpp:1476:9: warning: statement is indented as if it were guarded by... [-Wmisleading-indentation]
tn += ">";
^~
tests/auto/corelib/kernel/qmetatype/tst_qmetatype.cpp:1474:5: note: ...this ‘if’ clause, but it is not
if (tn.endsWith('>'))
^~
Fix += argument from char[2] to char as a drive-by.
Change-Id: I814dc58830934cac7fcf81eb7fd7564b2abeb631
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
An empty read or a failed write on the underlying QIODevice of the text
stream would lead to an early return where we wouldn't correctly restore
the QIODevice::Text flag of the io device.
Change-Id: I5b632f45dea6ede3f408113556c3dad1b96574e2
Task-number: QTBUG-47176
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Suppose the user connects QProcess::readyReadStandardOutput with a
slot that calls QCoreApplication::processEvents.
Assume the event loop did not handle events between QProcess::start
and QProcess::waitForFinished. The process writes to stdout and exits.
QProcessPrivate::waitForFinished calls drainOutputPipes which calls
QWindowsPipeWriter::waitForReadyRead. This in turn will trigger
_q_processDied via the readyRead signal and processEvents.
_q_processDied will delete the pid object and set pid to null.
After drainOutputPipes returns, _q_processDied is called again but it
must not be called if pid is already destroyed.
Prevent calling _q_processDied if pid is null.
Task-number: QTBUG-48697
Change-Id: Iee047938ee1529057a1a43d71f4e882750903c7e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Use default timeouts for wait functions. The increased timeouts will
only have an effect if the tests fail.
Print process errors if the process could not be started, while we're at
it.
Contract consecutive "#ifndef Q_OS_WINCE" blocks.
Change-Id: I6324e4c5b91b89ebb2580635b88705bbda922907
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
This is what std::vector implementations usually do,
because it minimizes memory fragmentation and useless
allocations since no user will call clear() unless
she intends to append new data afterwards.
Fix calls to resize(0) that show how existing code
tried to work around the issue.
Adjust test. Port from QVERIFY(==) to QCOMPARE as a
drive-by.
[ChangeLog][QtCore][QVector] clear() now preserves
capacity. To shed capacity, call squeeze() or swap
with a default-constructed QVector object, see the
documentation for an example.
Change-Id: I9cebe611a97e027a89e821e64408a4741b31f1f6
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
It made us skip the rest of the test, not just the small set of
sub-tests that were conditioned by the if () in whose else it sat.
Change-Id: I5e914e0aeb9d5ba44b21966d071aaccbc590365d
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
The windows.h include is not needed, the enums are properly known to
the metaobject system nowadays, and qprocess_p.h already has a
QT_NO_PROCESS guard.
Change-Id: I6bbdce19f097feb8260c51a29425279049aa0192
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Do not use a loop to execute similar but separate tests in
tst_QProcess::softExitInSlots. Use separate test rows with
distinguishable data tags instead.
This way we can deduce from CI output which part of this test failed.
Change-Id: Ic9bc996f2ced11b2bb1c33c1970e64937d860976
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
QLatin1String can be used as a string-view-like type.
When attempting to do so in uic, mid() and at() were
found to be missing. Added the others for completeness.
Use the new functions in uic, for which they were
originally conceived.
[ChangeLog][QtCore][QLatin1String] Added at(),
operator[](), mid(), right(), left().
Change-Id: I4cfe3e9ed1157dedee754b2012d9678fe72b161e
Reviewed-by: Milian Wolff <milian.wolff@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
This also reverts commit 018e670a26.
The change was introduced in 5.6. After the refactoring, 14960f52,
in 5.7 branch and a merge, it is not needed any more.
Conflicts:
.qmake.conf
src/corelib/io/qstandardpaths_mac.mm
src/corelib/tools/qsharedpointer_impl.h
tests/auto/widgets/itemviews/qlistview/tst_qlistview.cpp
Change-Id: If4fdff0ebf2b9b5df9f9db93ea0022d5ee3da2a4
The test was already blacklisted in openSUSE 13.1 and
was found not to work in 42.1 either.
Task-number: QTBUG-51172
Change-Id: I9f8f7b2251a230596a25183dee04ed37824f8ad7
Reviewed-by: Akseli Salovaara <akseli.salovaara@theqtcompany.com>
A bad test that assumes hard disk being
partitioned in a specific way
Task-number: QTBUG-51174
Change-Id: Ic4d56fbd041444e00bd656372e9190ba07ff2704
Reviewed-by: Akseli Salovaara <akseli.salovaara@theqtcompany.com>
Some entries were not updated and tests failed to succeed on platforms
which need to deploy content/testdata.
Change-Id: Ieb2b44c375b04cbaaecc1fb2303cc2478b86a100
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
testdata needs to be deployed to temp and current directory
needs to be set to that directory for the test to succeed.
Change-Id: I2dd023af9073d90afbb4ad60fcfb50bb1af4e159
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
WinRT does not allow do connect to the localhost due to security
constraints and sandboxing. Hence we need to disable those
currently.
Change-Id: Idb8c71397a41e5fa5bad9d618dba1bb389e71b9c
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
I had a doubt about what it would be, turns out it's ReadWrite.
Turns out it's documented, too :-)
Change-Id: I87c2ffc81aa240ffa88c495fe250b022d7fb3c21
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Similar to QMap::equal_range().
Will allow to easily fix inefficient code such as:
foreach (auto value, hash.values(key)) { ... }
[ChangeLog][QtCore][QHash] Added QHash::equal_range()
Change-Id: I6e19e25de632e897ad83d3141d9d07f0313f7200
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
I didn't add a transpose(), because r = r.transposed() is
perfectly capable of filling that role, and just as
efficient. Existing API mistakes are no excuse to create
more of them.
[ChangeLog][QtCore][QRect/QRectF] Added transposed().
Change-Id: Ic38721e9028496fc9b50f4d4cef2e7a60532eed8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
This patch makes sure that all events posted using Qt on top of the
GLib event loop have the loopLevel counter incremented.
This is done since Qt depends on the fact that all deleteLater() calls
are issued within the scope of some signal handler (in other words,
triggered by the chain sendEvent() -> notifyInternal2()).
There is a side effect though: in the conditions affected by this
patch, that is deleteLater()s issued within a glib event handler for
example, manually calling processEvents() or sendPostedEvents() with
or without the QEvent::DeferredDelete flag has the same effect, and
deferred deleted events are always processed.
While this is not a currently working feature which the patch breaks,
this side effect seems to be difficult to avoid without separating
sendPostedEvents() and processEvents() into a public and a private
method, in order to detect when they are manually called.
Such change could perhaps be done for Qt6.
An autotest for QTBUG-36434 is also included.
Autotesting for QTBUG-32859 seems to be more challenging in this
respect, due to its dependency on GLib.
Task-number: QTBUG-18434
Task-number: QTBUG-32859
Task-number: QTBUG-36434
Change-Id: Ib89175aa27c9e38bca68ae254d182b2cd21cf7e9
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
It must clear the previously cached sharedData->staticSelectors,
or else QFileSelectorPrivate::updateSelectors() does nothing and
the newly added static selectors end up being ignored.
Change-Id: If6997664629199be9f00de64c5dd01de2bf0a044
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
Blacklisting all tests, which were failing locally.
Task-number: QTQAINFRA-949
Change-Id: I40c25ab0155b8977596d61297ab252a546515f87
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
This makes implementing class methods that enable or disable a feature
stored in a QFlags<> member easier.
[ChangeLog][QtCore][QFlags] Added setFlag method to set or unset a flag
Task-number: QTBUG-27100
Change-Id: Ic602abbbf3100df78f21b7918573744d1bbd18c1
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
After the commit 7ff655360f, case 4 in SoftExitProcess class relates
to a channelReadyRead() signal instead of stateChanged(). Accordingly,
terminateSlot() is fixed to handle a special case when process is not
running.
Change-Id: Ie0d3284f5d264037d00e4ad6d927c0766be562b0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
We have to make sure that the plugins to be tested are located inside
the virtual sandbox / relative to the application binary. Launching via
winrtrunner, a test can find those plugins then. It is not possible to
those via TESTDATA and extract them to temp, as LoadPackagedLibrary only
loads inside the sandbox.
Unfortunately this also implies that running those tests inside Visual
Studio will fail, as Visual Studio copies the virtual sandbox to another
location missing the plugins. For automated testing this should not
matter though.
Change-Id: I70f5ef2d56b3cf526b731fd885f12583c8f6e103
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Setting conflicts to isSet & DaySection cleared it if we hadn't seen
the day stipulated, even if there had been a conflict (e.g. over year)
before we hit the day-of-week that didn't match the (unset, so
defaulting to) 1st of the month. Explicitly test for conflict and
only set conflicts (to true) if there is a conflict. Added regression
test.
Change-Id: I7363eb66a8bb808d341738d14969039834f50db8
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
As a result, this patch eliminates double-buffering in QProcess.
Change-Id: I436faa4a5ffc28ce77f959dd6089bef400ac39f6
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Some sequential devices allow data to be partitioned into several
channels that have the property of independently sequenced delivery.
Supporting such devices uniformly requires a unified API which provides
the user with a uniform concept of multistreaming.
This patch is based on QProcess's multiplexing model and introduces
the following features:
- ability to get the number of channels;
- multiple internal read/write buffers;
- channel selection functions;
- notification signals on channel activity.
To keep the source code compatible with single-channel implementations,
introduce a private class that references the current read buffer and
hides multistreaming internals from the user.
Bump the TypeInformationVersion field in qtHookData, to notify the
Qt Creator developers that the offset of QFilePrivate::fileName was
changed and dumpers should be adapted.
[ChangeLog][QtCore] Added multistreaming to QIODevice.
Change-Id: Idcaa6a618927c101c4c7284d2a633913be6a6ee2
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Uses a time derived via .toUTC() to ensure the .toLocalTime() comes
out at the time we expect.
Task-number: QTBUG-49008
Change-Id: I2005127929c7eab1b7a3cbaba8d21df8c9585d17
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDateTime::toString for Qt::TextDate unconditionally uses the system
locale (because QDate::shortDayName and QDate::shortMonthName do).
Setting the default QLocale has no effect. If you ask me, those two
QDate methods are buggy, but they are documented that way.
Change-Id: I408dcb81ba654c929f25ffff1427366b04da5a43
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
I wrote a script to help find the files, but I reviewed the
contributions manually to be sure I wasn't claiming copyright for search
& replace, adding Q_DECL_NOTHROW or adding "We mean it" headers.
Change-Id: I7a9e11d7b64a4cc78e24ffff142b506368fc8842
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Not that we require it, but since The Qt Company did it for all files
they have copyright, even if they haven't touched the file in years
(especially not in 2016), I'm doing the same.
Change-Id: I7a9e11d7b64a4cc78e24ffff142b4c9d53039846
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
msvc2015 reintroduced a couple of functions from the win32 API
towards WinRT.
Enable usage of those and simplify the file system engine.
Furthermore update the autotests.
Change-Id: I9eafffba0ddfd05917c184c4a6b9e166f86d71d9
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
The important one is EET, for the benefit of our CI system; but other
European zones and the USA's coastal zones likely have enough hackers
in them to make this worth checking.
Change-Id: Idcc703bce29808e1a0a6279680cc8d3cbed38dac
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Time zones change on the whim of politicians. Consequently, we can
seem to be in CET/CEST or on UTC (because we tested sample dates when
our zone coincided) when we aren't (i.e. we're in a materially
different zone at the time probed by some particular test). Make the
initialization of the globals that test this more robust against
governmental meddling and document the unfixable problem with Algeria:
a DST transition *on the epoch*.
Change-Id: I17c5c81d339b80af12f4ffab367e28052dd6c2fa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There are several European time zones; the only one relevant to the
tests here is CET. They won't work with WET, GMT or EET. So name
them and related variables for CET, not for Europe.
CET's summer-time isn't called CST; and the (existing) spring forward
test works only in CET/CEST, not elsewhere in Europe.
Change-Id: I55c7544bf792de7495700b749b935ec534831d8b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When using QUrl::PreferLocalFile we do want to strip the leading slash,
as toLocalFile() would do as well.
Behavior change by means of an example:
QUrl url(QUrl::fromLocalFile("C:/file.txt")
url.toLocalFile() --> "C:/file.txt"
Before:
url.toDisplayString(QUrl::PreferLocalFile) --> "/C:/file.txt"
After:
url.toDisplayString(QUrl::PreferLocalFile) --> "C:/file.txt"
Task-number: QTBUG-41729
Change-Id: I7d425541f6077ebcf3fcf46feeb7e0f03a0d7fe2
Reviewed-by: Dominik Haumann <dhaumann@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][Important Behavior Changes] Starting with Qt 5.7, Qt
requires a C++11 compiler with support for C++11 atomics. This affects
user code too: Qt headers no longer compile with a C++98 compiler. The
minimum compiler versions for this release are:
* Clang 3.4 (found in XCode 5.1)
* GCC 4.7
* Microsoft Visual Studio 2012
Change-Id: Ib056b47dde3341ef9a52ffff13ef1f496ea9363f
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Dmitry Shachnev <mitya57@gmail.com>
This adds a way to resume reading from a stream after a ReadPastEnd error.
This is done by introducing a stream read transaction mechanism that keeps
read data in an internal buffer and rolls it back on failure.
[ChangeLog][QtCore] Added QDataStream startTransaction(),
commitTransaction(), rollbackTransaction(), abortTransaction()
functions to support read transactions.
Task-number: QTBUG-44418
Change-Id: Ibf946e1939a5573c4182fea7e26608947218c2d9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
There are three deprecated language codes that Java still uses for the
locale so we need to account for these inside QLocale by mapping them to
the right language.
Task-number: QTBUG-49632
Change-Id: Ib66b3f2763e085f7384228f2490b048bb56be259
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Added a new overload function that allows the developer to
specify the desired precision. Until 6.0, it will require
the symbol and precision to be passed to it. Once Qt is at
version 6.0, it will replace the overload function that
requires a value and optionally a symbol.
[ChangeLog][QtCore][QLocale] Added an overload for toCurrencyString()
that allows the decimal precision to be specified.
Change-Id: I1fb7dde3583f46de2ed20ec2a7abaeca23a903ef
Task-number: QTBUG-46595
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Make a private member mutable to enable default assignment operator.
Change-Id: I1216875c186ed800e07c6b41a5bae18c3b71b2fa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Introduce a transaction mechanism that gives the ability to read the
data atomically. Current implementation supports transactions for both
types of devices. For sequential devices, it records the whole input
stream during transaction. For random-access devices, device position
is saved when transaction starts. If an error occurs, the application
may be able to recover the input stream by rolling back to the start
point.
Also, QIODevice::peek() was rewritten to make use of transactions
internally. The replacement of QIODevicePrivateLinearBuffer by
QRingBuffer is closely entangled with that, which makes it unfeasible
to do separately.
Bump the TypeInformationVersion field in qtHookData, to notify the
Qt Creator developers that the offset of QFilePrivate::fileName was
changed and dumpers should be adapted.
[ChangeLog][QtCore] Added QIODevice's startTransaction(),
commitTransaction(), rollbackTransaction(), isTransactionStarted()
functions to support the read transactions.
Task-number: QTBUG-44418
Change-Id: I3564b343ebeeaaf7c48a1dcdb7ef0a7ffec550f2
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
When QDateTime::addDate() and friends sanitize their end-state, they
were using the DST status of their start-state (if known) to control
it. This lead to misguided results and, in particular, inconsistent
results given that a raw-constructed QDateTime comes into being
ignorant of its DST, while a .toLocalTime() one knows its DST.
Furthermore, the code to do this was triplicated, tricky and poorly
explained. So pull it out into a local static function and explain
what it's doing, and why, more clearly and only once.
Task-number: QTBUG-49008
Change-Id: Ia4bb3c5e9267fff8bb963ea705267998218ed623
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
This partially reverts commit e486d69133.
It broke too many users, even though all of them deserved to be broken.
The new functionality will be provided by differently-named functions,
where possible (problem: equality operators).
I did not revert the fix for the off-by-one error in
tst_qtextdocumentfragment.cpp.
I also didn't revert the change in the inequality relational operators,
since for all strings s1, s2 and s2' where s2' is s2 truncated at the
first NUL, s1 < s2 ⟺ s1 < s2' (since NUL < c for any c != 0), and,
trivially, for ≤, >, ≥, too. This does not hold for = and ≠, of course,
since "foo\0bar" ≠ "foo".
[ChangeLog][Important Behavior Changes][EDITORIAL] Reverted: All
conversions from QByteArray to QString now preserve embedded NULs...
Change-Id: If4b47048b39ae5be6ed08e6d91809626a67ea7f5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Widen its interval (to work in more TZs) and test spring as well as
autumn. Anywhere that does have a DST transition probably has it
between August and December; and there's no benefit to using a narrow
window.
There's also no sense skipping the test if we don't know there's a DST
transition: the test should still work, it just won't be testing
anything (about DST transitions).
Combine date and time checks into date-time checks, so that, when one
of them fails, QCOMPARE lets us know how the other changed, too.
Task-number: QTBUG-49008
Change-Id: I145b939ffef0dd0b54fd0e3cdf72a159c57ec00b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Not just fuzzily equal. The fuzzy comparison fails for infinities, since
the expression p1 - p2 where p1 = p2 = infinity is NaN. And NaN
comparisons are always false.
As a nice side-effect, we don't do the more expensive computation of a
multiplication if the two numbers really are equal.
Task-number: QTBUG-50036
Change-Id: I11f559ef75544c50b3f8ffff1420cec7c7273295
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
If CountedStruct is passed a GetSenderObject object,
it will attempt to call a member on it from within
its own destructor.
That works usually quite well, but in this test case,
which tests for function object leaks when a connection
is torn down because the sender object is destroyed,
the destruction of the CountedStruct happens when all
connections are severed in ~QObject. At that point,
what used to be a GetSenderObject instance no longer
is one and the call into one of its member functions
invokes undefined behavior.
Fix by making QObject::sender() public by a using
declaration instead of a wrapper function.
Found by UBSan:
tests/auto/corelib/kernel/qobject/tst_qobject.cpp:6007:104: runtime error: member call on address 0x7ffc6e7538b0 which does not point to an object of type 'GetSenderObject'
0x7ffc6e7538b0: note: object is of type 'QObject'
Change-Id: Ia973140037b3c1b5a670a8a3949d09b956f40349
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Off-by-one error: we should have calculated whether the current year is
leap, not the next year. This affected any 53-week leap years.
Task-number: QTBUG-50273
Change-Id: I134ce5db2f82468585ffffff14264cb9f12998fd
Reviewed-by: Martin Klapetek <mklapetek@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Binding a reference to the nullptr is undefined
behavior.
Just skip that particular test when 'ptr' is null.
Found by UBSan:
tests/auto/corelib/tools/qsharedpointer/tst_qsharedpointer.cpp:258:32: runtime error: reference binding to null pointer of type 'struct Data'
Change-Id: I125588b9d269a6f76716d660d03142f409513885
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
If QObjectPrivate::declarativeData is set, it is
in various places in Qt expected to point to a
QAbstractDeclarativeDataImpl, from which ownedByQml1
is unconditionally read.
In noDeclarativeParentChangedOnDestruction(), the
declarativeData pointer is, however, set to a local
QAbstractDeclarativeData instance, which, being an
empty class, has size 1 and alignment 1.
Depending on the compiler's idea of bit field order,
this code either read uninitialized data from the
dummy object, or else some random stack memory outside
any (valid) object.
What caught UBSan's attention, though, was the
difference in alignment between the two classes:
src/corelib/kernel/qobject.cpp:917:9: runtime error: member access within misaligned address 0x7fffc9cf706f for type 'struct QAbstractDeclarativeDataImpl', which requires 4 byte alignment
Fix by providing a properly initialized object of the
correct type.
Change-Id: Iae83a949ee5a7bc98df13e35ea614c063085fa13
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Don't pass around meta-type IDs in QMetaType::Type
variables. It leads to reading values from an enum
variable that are invalid.
Fix by passing the IDs around as int.
Found by UBSan:
tests/auto/corelib/kernel/qmetatype/tst_qmetatype.cpp:408:5: runtime error: load of value 4028, which is not a valid value for type 'Type'
Change-Id: Idd106ee3d7960fe3d8fefc0fc5830fc22d38a513
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The reinterpret cast from a QTcpSocket → QAbstractSocket → QIODevice
to MyIODevice → QIODevice was undefined.
Fix by simply instantiating a MyIODevice, which must then inherit
from QTcpSocket, of course.
Instead of fixing the class name in the overridden setOpenMode()
method, simply make the base class' implementation public with
a using declaration.
Found by UBSan:
qtbase/tests/auto/corelib/io/qiodevice/tst_qiodevice.cpp:84:22: runtime error: member call on address 0x7ffcca2d23f0 which does not point to an object of type 'MyIODevice'
0x7ffcca2d23f0: note: object is of type 'QTcpSocket'
Change-Id: I939b3548949b9b5765df4a6cc81875e169fd69dd
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
openStandardStreamsFileDescriptors and openStandardStreamsBufferedStreams
fail on OS X: lseek somehow works on sequential streams (standard streams)
but QFile has pos() == 0 (since it's sequential).
Change-Id: I6a6161c012a91de189f59c533880fb8fe7a66d37
Task-number: QTBUG-49841
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
qstrtod() used to accept trailing junk until libdouble-conversion was
introduced and we need this behavior in order to implement EcmaScript's
parseFloat() correctly. The QString and QByteArray methods should not
accept trailing junk, though.
Task-number: QTBUG-50131
Change-Id: Ide922da0d65b2576be2c9f47f6053057eff77994
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
When a high-priority event is posted in overrided
'QStateMachine::beginSelectTransitions', the event may be remained in
event queue, and be not dispatched until another event posted.
Change-Id: Ifda288d9c00ac7985e426b9cc02bda382ebaac35
Reviewed-by: Erik Verbruggen <erik.verbruggen@theqtcompany.com>
We already include <utility> in <qglobal.h>, so we might
as well provide a qHash() overload for std::pair.
[ChangeLog][QtCore] Added qHash(std::pair), defined in
<QHashFunctions>.
Change-Id: I0f61c513e82e05ce9d2e56bcf18f3be9e2da4da9
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This was documented, but not what the code did.
Task-number: QTBUG-48529
Change-Id: I4849778c61dcae13be27c62b24717693c0c07d78
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This will be used in QTextStream to speed up padding processing.
[ChangeLog][QtCore][QString] Added resize(int, QChar) overload.
Change-Id: Id51f8cdacb167310157100b05cacf20e9a5d2716
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Probably correct.
The question is just why this code has survived for so many years.
Change-Id: Iaf01850476f9b066243abebb9ee6c5928d7ada19
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Probably correct.
The question is just why this code has survived for so many years.
Change-Id: Iaf01850476f9b066243abebb9ee6c5928d7ada19
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
/home has been observed to be writable on some CI machines.
Add checks verifying existence and correct permissions.
Change-Id: Ie0f952e20d0d8eb0b57234eea2e2ecb78f5a7b58
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
If the variant contains a known json type (value, array, object or
document), simply unwrap those. In the case of the json document
wrap the contained object/array into a QJsonValue.
This should be the expected behavior, and makes more sense than
returning a null QJsonValue.
Task-number: QTBUG-41234
Change-Id: Id084fc11220d51aaf78b7694fd0ebef1411f5c51
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Path normalization should happen only when NormalizePathSegments is set.
Use a less intrusive fix for the setPath("//path") issue that
commit aba336c2b4 was about.
This allows fromLocalFile("/tmp/.") to keep the "/." at the end,
which is useful for appending to the path later on (e.g. to get "/tmp/.hidden")
Change-Id: Ibc3d4d3276c1d3aaee1774e21e24d01af38fa880
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If the environment variable is set, but points to a non-existing directory,
the user would get a warning about chmod failing. Better be clear and
warn about the fact that the directory itself doesn't exist.
Also warn if $XDG_RUNTIME_DIR points to a file rather than a directory.
Task-number: QTBUG-48771
Change-Id: If84e72d768528ea4b80260afbbc18709b7b738a8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
When the byte sequence for a BOM occurs in the middle of a utf8 stream,
it is a ZWNBSP.
When a ZWNBSP occurs in the middle of a utf8 character sequence, and the
SIMD conversion does some work (meaning: the length is at least 16
characters long), it would not recognize the fact some charactes were
already decoded. So the conversion would then strip the ZWNBSP out,
thinking it's a BOM.
The non-SIMD conversion did not have this problem: the very first
character conversion would already set the headerdone flag.
Change-Id: I39aacf607e2e068107106254021a8042d164f628
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test was improved by:
- Use QCOMPARE instead of QVERIFY
- Use QTRY_ macro instead arbitrary qWait
- Use longer time line
The test executes faster and it should be less vulnerable to
an unreliable timer.
Change-Id: I92675015a6251b47eaf20b0fc916f3a36b52d783
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
The test run faster and it less vulnerable to an inaccurate time.
Change-Id: I19475095395dcf1e6d47fdbba5eeffabab1fc7b9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Now the test is less fragile to time and it executes 4s faster
Change-Id: Id3eb8ed2c03317e7d2f2c3cd17f889a8d8e7e5b4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
The test still can fail because 1s is quite a short time.
Change-Id: I6f42c182f2932d5a053f6a69667210529c9a7697
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Strings do not have to be overly specific to test parser function.
Change-Id: I345dfec7fb4b8004661f6757cfd53b428ad87b6b
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
This test is marked as blacklisted on 10.10, and it
is found to still fail in 10.11.
Task-number: QTBUG-49834
Change-Id: Ibddb1af6b61f3fca2b2aea18102bbaa5390a40d3
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
This reverts commit 9a6a58a95a,
which was a work-around for a qmake bug, now fixed.
Task-number: QTBUG-19393
Change-Id: Id467bb5907a88f03eac0e29a90f4ff7e97045423
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
TEST_HELPER_INSTALLS cannot be used on platforms with no
QProcess support.
Change-Id: I2a6a283d94ca4487fc628449c53fc37140dd291d
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
This is used throughout Qt and resolves to
operator op(QChar, QChar)
This test makes sure we don't break those
use-cases as we fix missing relational
operators as found by tst_QStringBinOps.
In the other direction, 0 op QChar is
ambiguous, due to op(const char*, QString)
etc, so only test the uint op QChar case.
Change-Id: Ifae7fb65bf3269583898cfea3fc6c95547c75122
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
[ChangeLog][QtCore][QProcess] Added method
setCreateProcessArgumentsModifier to QProcess on Windows to enable
users to intercept and modify CreateProcess parameters.
With such a modifier, calling code can decide whether to inherit
handles, modify the STARTUPINFO struct, and pass its own
combination of process flags to CreateProcess.
Task-number: QTBUG-390
Task-number: QTBUG-6917
Task-number: QTBUG-9350
Task-number: QTBUG-24619
Change-Id: I14757dbbacfebb1c89f52402d36fba0ba9c45f3a
Reviewed-by: Björn Breitmeyer <bjoern.breitmeyer@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Move some code (like registrations of meta types) from init() to
initTestCase() in the process.
Change-Id: I57db5156647cfadab554fbed853b2e68b2815f3b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
If the LHS is detached and has existing capacity that is large
enough to hold the RHS, re-use the memory instead of allocating
a new buffer and throwing away the old.
Change-Id: I53d42825da92c264c7301e8e771cba9fb35c321b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][State Machine] Added constructor overload that
takes a pointer-to-member for the QSignalTransition.
Change-Id: I80ac6e16d0edf7d2ab09882b6f6db4cbd73364e1
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
It should compile, since the std::shared_ptr does.
[ChangeLog][QtCore][QSharedPointer] Fixed a problem that would cause a
compilation error when constructing a QSharedPointer of a const type
when the type derives from QEnableSharedFromThis.
Task-number: QTBUG-49748
Change-Id: I8de47ed6c7be4847b99bffff141c84f5e0b6bea8
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Only add C++14 to the project configuration when C++14 support is
available on the platform. Adding it because the platform supports
C++11 doesn't work when the platform _only_ supports C++11 (e.g.,
QNX 6.6.0).
Task-number: QTBUG-49491
Change-Id: I15de38bb06d912a314b9dd18c80b513cc06a855e
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Replace hardcoded interval by QTRY_COMPARE() ensuring that all tasks have
finished, since otherwise QThreadPool::tryStart() fails in the next run.
Remove blacklisting for MSVC2012 since it is not compiler-specific.
Task-number: QTBUG-49654
Change-Id: If49b6eb9ef4da4ba2911839166c397d84c175e00
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Ensure the test works in a working directory with read-only
permission and that the file names are unique.
The test can then be executed repeatedly by COIN even in case
left-over hanging process helpers still lock the files. Also
disambiguate the "data" files used by various tests.
Task-number: QTBUG-47370
Change-Id: I3b9c7b70828da78f400196fcbba27bc61ea4538f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Introduce constants and make the interval for the 2nd thread a bit
longer.
Task-number: QTBUG-49653
Change-Id: I92ac0494ec6c9af5bde858007d08e26210215434
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Introduce a base class for the threads that ensures termination in the
destructor to ensure all QThreads instantiated on the stack are terminated.
This should reduce crashes since the test thread classes have pointers
to stack variables of the test slots.
Set object names on the threads for better diagnostics.
Decouple wakeOne()/wakeAll() that impact each other via the static count
variables of the thread class by introducing a base class WakeThreadBase
keeping a pointer to an QAtomicInt count variable on the stack instead
(similar to the existing pointers to the mutexes, etc).
Task-number: QTBUG-49653
Change-Id: I73537386bf36019efa81e8e24ba9af92506f7794
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
It was used to verify waitForFinished() and printed QProcess::errorString()
on failure, which is misleading, since the process is not
in an error state - it is still running. Example:
QWARN : tst_QProcess::setStandardOutputFileAndWaitForBytesWritten() QProcess error: 5: Unknown error
FAIL! : tst_QProcess::setStandardOutputFileAndWaitForBytesWritten() 'ret' returned FALSE. ()
Use a plain QVERIFY instead.
Task-number: QTBUG-47370
Change-Id: Iacfa6e1a5ffd2be4e1257a27a400ccc59671e8c8
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Silence warning:
Don't know how to handle 'hint', use qRegisterMetaType to register it.
Task-number: QTBUG-49623
Change-Id: Iec0a823c7af87eddd9a3f126a1b970da1ff2f03f
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The EcmaScript format for printing doubles in exponent form differs
from Qt's format only in this aspect. EcmaScript explicitly prohibits
leading zeroes in exponents. It is thus worthwhile to add those flags
in order to be able to generate and parse doubles in compliance with
EcmaScript.
[ChangeLog][QtCore][QLocale] Additional flags in QLocale::NumberOption
allow generating and parsing doubles in EcmaScript compliant format.
Change-Id: Ia7b82c2e67bb8b80bd890014ff5cd4563faf2a03
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Also use this for converting doubles with QVariant. We generally want
exact results there, rather than adding rounding errors whenever we
convert.
[ChangeLog][QtCore][QLocale] Added special value for double conversion
precision to get shortest accurate representation.
Change-Id: I905b8a103f39adf31d24b6ce2c8a283cf271b597
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The platform is no longer supported or actively maintained, and is
in the way for improvements to the Unix event dispatcher and QProcess
implementations.
Change-Id: I3935488ca12e2139ea5f46068d7665a453e20526
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
QString::asprintf() has the ability to take a ushort* array as
obtained from QString::utf16() and insert that into the output
with an %ls conversion.
But no-one ever used this, because just passing QString::utf16()
to QString::asprintf() creates a warning about wchar_t* expected,
but ushort* provided.
The new qUtf16Printable() macro adds the necessary casts (via void*
to prevent any "type-punned pointer" warnings) to make
passing QString::utf16() to QString::asprintf() work silently.
This should greatly reduce the need to do a round-trip via utf-8
just to print the contents of a QString.
[ChangeLog][QtCore] Added qUtf16Printable().
Change-Id: I7ddd8d2b2a2191c9faa26aca95d49850d94b287c
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... at the cost of a bunch of warnings about
ushort*/wchar_t*.
It wasn't checked at all, which isn't really a solution,
either.
Split off the %s checks into a separate function, which
makes obvious the sorry state of sprintf non-%s, non-%d
testing that's left.
Change-Id: I6312f984bacfb568b609e34b5218b3ab9a9765c4
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
In C++, signed overflow math is Undefined Behavior. However, many CPUs
do implement some way to check for overflow. Some compilers expose
intrinsics to use this functionality. If the no intrinsic is exposed,
overflow checking can be done by widening the result type and "manually"
checking for overflow. Or, for X86, by using inline assembly to use the
CPU features.
Used in QtQml.
Change-Id: I2ef2523ccaa98f6757a45e24862a2fa730a26bb0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When that happens, we need to detach (in-place conversion won't work),
so we recurse back into the same function, but the template version that
does detaching.
Task-number: QTBUG-49181
Change-Id: Idba8c29717f34c70a58fffff1412fea3acc95f98
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Extend the current BLACKLIST to cover all all Windows versions
and add watchFileAndItsDirectory:native backend-testfile.
Task-number: QTBUG-30943
Change-Id: Ic58c090f23d3584843bc1e74eba533d75c530ad3
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
The file exists and it's listed in json.qrc (for Android) but it isn't
listed in TESTDATA. This is only a problem when the target is a another
system as is the case with Qt for QNX. One of the tests fails because
the file isn't deployed.
Noticed this while testing the changes for custom spacing of JSON
output.
Task-number: QTBUG-47437
Change-Id: I627592a5a225f50fdb8e3cdd6ac72dff43936ae5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Test that stepping into the missing hour lands us somewhere sane.
Check that raw instance and product of .toLocalTime() agree.
Task-number: QTBUG-49008
Change-Id: I430382ae223bcb43b151d2d6054ecbdd7edc8a47
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
warning: 'typemsg1' may be used uninitialized in this function [-Wmaybe-uninitialized]
Change-Id: Ie68d279eccb003a2ca5a0116eea336cbc8776660
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
* Georgian lari currency symbol
* A large collection of CJK unified ideographs
* Emoji symbols and symbol modifiers
* Letters to support the Ik language in Uganda, Kulango in
the Côte d’Ivoire, and other languages of Africa
* A set of lowercase Cherokee syllables, forming case pairs
with the existing Cherokee characters
* The Ahom script for support of the Tai Ahom language in India
* Arabic letters to support Arwi—the Tamil language written in the Arabic script
For more details, see http://www.unicode.org/versions/Unicode8.0.0/
[ChangeLog][QtCore] Unicode data updated to v.8.0
Change-Id: If255f95c9c45655b721369a116299da3cabbba0a
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The behavior from before libdouble-conversion is that in case of an
overflow the OK flag is set to false, but the returned number is still
infinity, rather than 0. Also, the number of processed characters is
always set to the number of characters actually processed, unless
garbage is found.
There is an important distinction between an overflow and garbage. The
client code may accept overflows and infinity may be a valid result.
Garbage is most certainly not acceptable. Having an infinity/false result
in addition to 0/false allows the client code to distinguish those.
One application where this is useful is parsing JavaScript.
Change-Id: I4b8581568144b44fca3353c4bd9685c702762af9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This also fixes the underlying cause of QTBUG-44039 and QTBUG-43885.
You can choose between system, qt, and no libdouble-conversion
support. If you choose "no", snprintf_l and sscanf_l will be
used.
By default, system double conversion is used if the system provides a
double-conversion library. Otherwise the bundled libdouble-conversion
is built. sscanf_l and snprintf_l are not used by default as the
planned "shortest" conversion mode to produce the shortest possible
string will give less precise results when implemented with snprintf_l.
Change-Id: I8ca08a0fca5c54cf7009e48e771385614f6aa031
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
If the future is finished when a watcher starts watching it, it is
perfectly reasonable for the watcher to get the finished message
promptly. If you pause the watcher before any message loops get to
run, the message presently won't get through until the watcher is
resumed, but there is no reason to guarantee that; indeed, one could
consider it somewhat perverse behavior.
So move the reportFinished() calls to after the pause()s.
Also eliminate a used-once local variable and use QTRY_VERIFY() in one
place where qWait() was used before.
Change-Id: I4bc6091fd7437a4d341be511b7a140f3d72d850e
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Attaching spies afterwards was provoking a warning during tests:
QFutureWatcher::connect: connecting after calling setFuture() is likely to produce race
Change-Id: I6ee8c3613cecebd1c69b0337139d8a19a33f4a11
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The previous implementations did not check the full mantissa. The result
was that certain NaN values were seen as +/-Infinity.
A nice benefit is that the generated code for this implementation is also
faster.
Task-number: QTBUG-47692
Change-Id: I1507ec579ccd9a2ab97da8cf83dabbc5d6e28597
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
