Change-Id: Ifc99af49398e5d6e057035d2de55fe218c8418d6
Reviewed-by: Andy Nichols <andy.nichols@theqtcompany.com>
Reviewed-by: Robin Burchell <robin.burchell@viroteck.net>
In QFontEngineMulti::stringToCMap() we call the primary engine's
implementation of the same function. If this engine does not support
the character in question, then it's supposed to clear the glyph array,
otherwise there may be left-over junk in the glyph array from previous
script items and the font selection algorithm will think it has already
found a match for the character corresponding to the glyph position.
The freetype engine, for instance, clears the respective entries
in the array when it gets a 0 glyph from the font engine.
In particular, this would happen when you had a ligature preceding
an item that was shaped separately. The ligature (e.g. "fi") would
set the first two slots of the glyph array, but later replace
them with a single glyph. The next item would then get an offset
of 1, i.e. pointing to the position in the glyph array where the
glyph for i was originally contained. If this was not cleared,
it would assume the primary engine supported the character. If
the character was of an unsupported writing system, then you would
get a box in place of it instead.
[ChangeLog][OS X][Text] Fixed appending text with a different
writing system and formatting to a latin ligature.
Change-Id: Id8c81cdc8e2d8994cc1a999769fcae452c4f52ae
Task-number: QTBUG-44708
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Change the shared pointer to store a QPlatformCursor instead of
QWindowsCursor, removing the dependency of qwindowsscreen.h on
qwindowscursor.h.
Change-Id: I8b4bbc9fd4d5046c30ac3784f14229a9cc6d8dc6
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
The Activity onResume function is always called before the application
gets initialized and we let the applicationState set to the default
value which is AppicationInactive.
Change-Id: Ifc3c7e3dfc51f2b821f8ca87f8b711f485b6a6f8
Reviewed-by: Peter Rustler <peter.rustler@basyskom.com>
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
When using default configure value (auto) for libudev + libinput and
libudev is not available, disabling libinput failed and it is enabled
even it requires libudev to work.
Change-Id: Ia2ead66c5cebc8658f2c29445f5c81c9f8b30dc8
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Until now it was mapped that way only under KDE and Gnome.
Task-number: QTBUG-44772
Change-Id: I65a425bb531909dff4110f086c9aee8ae7a747c6
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Moved to processKeyEvents() on all platforms except OS X.
Previously QWindowSystemInterface::tryHandleShortcutEvent() was called
from inside QWindowSystemInterface, this is considered unsafe as it
ends up calling sendEvent(). On some platforms the call might come from
a different thread then the receiver and cause an assert.
Task-number: QTBUG-44712
Change-Id: Ie80c698f63b9c3d9f52aa94380e539a84caea912
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
And add tests for the GCC intrinsics and for std::atomic.
Task-number: QTBUG-43794
Change-Id: Ic5d393bfd36e48a193fcffff13b9b2dbaee80469
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
If our socket is already of a given type (probably due to a previous
call to bind()), then constrain the incoming target address to be of the
same family. On some OSs, trying to send or connect to an IPv4 address
from an IPv6 socket will fail with EINVAL, even if the socket is not in
"v6only" mode.
bind() can't be called after already being bound, but the function can
still be called on a socket created by the user and passed on with
setSocketDescriptor().
Change-Id: I209a1f8d0c782c6b6de2b39ea4cfad74d63f3293
Reviewed-by: Richard J. Moore <rich@kde.org>
This has been known to be broken for a while. Now it works: you can bind
and you'll retain the port (and the file descriptor) for the connect
call. Incidentally, in fixing the binding for more than one IP for the
hostname (with event loop), this commit fixes the setSocketDescriptor
XFAIL.
[ChangeLog][QtNetwork] Fixed a bug that caused both QTcpSocket and
QUdpSocket to close the socket and lose any bound ports before
connecting. Now bind()/setSocketDescriptor() followed by connect() will
retain the original file descriptor.
Task-number: QTBUG-26538
Change-Id: I691caed7e8fd16a9cf687b5995afbf3006bf453a
Reviewed-by: Richard J. Moore <rich@kde.org>
invalid conversion from ‘unsigned char**’ to ‘const unsigned char**’
Task-number: QTBUG-44744
Change-Id: I6263db106fe28c6aa04db8ca79421b3a9fc5adc9
Reviewed-by: Richard J. Moore <rich@kde.org>
If a QWindow has never been shown, it has no platformWindow (it's null).
So it's a valid condition and we need to be sure that the pointer isn't
null before dereferencing it.
Task-number: QTBUG-44766
Change-Id: Ia0aac2f09e9245339951ffff13c7eb024d6a0773
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Removes the non-templated pixellayout methods that were used for
non-c++11 builds, and instead initialize with the templated ones
verbatim.
These versions are faster, and using only those removes duplicate code.
Change-Id: I91a7d9122d2601ad282287a2f5ed6b88877d52fb
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
As QAIM and related classes are becoming more useful in the QML
environment, it makes sense to make these invokable.
Make the access API and the setData method scriptable. Avoid
making the structure changing APIs scriptable now to be conservative.
Export the ItemDataRole enum through the staticQtMetaObject to make
built-in roles available.
Change-Id: I47b1682e6fa8ba32c7314c73fc10a7bbaa6d1f98
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
Reviewed-by: Stephen Kelly <steveire@gmail.com>
QML code like this should be possible:
Text {
text: selModel.selection.contains(modelIndex) ? "blue" : "yellow"
}
If the selection is just a Q_INVOKABLE method, then all consumers need
to set up
Connections {
target: selModel
selectionChanged: foo()
}
That is obviously not the API we want (made more clear by the fact that
the signal is already perfectly named) because it is not declarative but
it can be. So, make it declarative by making selection a property.
Change-Id: Id1a05ae9b91e45e6d462bea4272b8740571e9fc3
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
Moc doesn't have the built in defines that clang has, so we need to
hard-code some of these so that moc resolves the Q_OS_IOS define
in the end, based on qsystemdetection.h and TargetConditionals.h
Change-Id: Id9a7f870b940f99f27c55a2a887d0ce93217b821
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Due to common subexpression elimination instruction set extensions may
leak from the objects where they were enabled when doing link-time
optimizations.
To avoid that this patch disables LTCG/LTO on files built with extra
instruction set extensions.
Change-Id: Ie34ad900be7fb04a0dc4d3562187ee170c183333
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If the coordinates were too close (at the limit of the number
accuracy), the splitting algorithm in QBezier::shifted() would never
finish. Ref. testcase in bugreport.
Task-number: QTBUG-44674
Change-Id: I2a575cdc6284504ef5e3eb2b749857576fe433c3
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
www.example.com is a reserved domain (RFC 6761), but IANA is running a
web server there. As for www.foo.com, that also exists, is a real
website and is often content-filtered in corporations (it triggers a
firewall warning for me -- "You attempted to visit a site that is in
violation of Intel acceptable use guidelines").
So use a localhost instead, since we don't actually need to connect to
the servers to do the work. And since we don't need to connect, I chose
port 4 as it's extremely unlikely someone is running an HTTP server
there (/etc/services lists it as unassigned).
Change-Id: Ia0aac2f09e9245339951ffff13c82439c6d5f945
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Improves the conversion from RGB888 to RGB32 on platforms without SIMD
versions. This includes the fallback used on non-neon ARM devices.
Besides image conversion the routine is also used for decoding JPEG.
On x86 this version is within 0.7x of the speed of the SSSE3 version.
Change-Id: Id131994d7c3c4f879d89e80f9d6c435bb5535ed7
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
[ChangeLog][QtCore] Q_ENUMS and Q_FLAGS have been deprecated, and replaced
by Q_ENUM and Q_FLAG macros. These two new macros automatically register the
enum with the Qt metatype system, allowing automatic conversion to or from
string in QVariant, or to show the strings by QDebug operators. They also
enable the new QMetaEnum::fromType function.
Change-Id: I80cccd7ad3fc46b11aee2fe50681a8126debf972
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
There's no need to decode the event details here anymore, and anyway
this had a bug: it always said the device is unknown.
Change-Id: If99dddbe2136d95e818f4fe526f62650cbd7c1ca
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
On some devices there can be spurious events indicating that the two
touchpoints are very close together, so that the ratio of present
line length to previous line length can be very large, and the angle
delta can be random. But in the normal scenario, there will be a lot
of events, in which the touch point movements are small. So if the
line length ratio is unreasonable, it's safe to ignore one event and
wait for the next.
Task-number: QTBUG-44665
Change-Id: Ibb7fe560b6a3f7db72d73aad3468c61f24a95d13
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
The swipe handler is simple, and also doesn't currently work on every
platform. But the pinch handler is the one that needs explanation,
because the difference between incremental and absolute values of the
rotation and scale properties is tricky.
Change-Id: Ie3c7f4941d4a17734c9a920a8dd978f86fb03c4b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
This reverts commit 24c52bd44b and makes
the Qt unit tests requiring DNS zones to use the temporary test zone in
macieira.org (Thiago's domain).
Change-Id: Ia0aac2f09e9245339951ffff13c6d3752c83b773
Reviewed-by: Jani Heikkinen <jani.heikkinen@theqtcompany.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Register font's english name as alias in the callback of
EnumFontFamiliesEx() at the time
QWindowsFontDatabase::populateFontDatabase() is being called. This will
help us to resolve english font family name to its corresponding localized
alias once windows font database has been populated. It will also fix an
assertion in Chinese Windows.
Task-number: QTBUG-44647
Change-Id: I265d93c16a1677a7f31ff56d60c24f6e90666419
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Cross compilers from latest yocto (dizzy) are no longer built with
default value for mfloat-abi, which means it needs to be given for
both compiler and linker to produce correct binaries. Otherwise
linker will selected dynamic linker as /lib/ld-linux.so.3, instead
of /lib/ld-linux-armhf.so.3 when compiling for hard-float.
Change-Id: I2fe116b1a90a0fbd078a4e8757abd4bc64a7b56e
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
It produces too much log output, so now it must be enabled by both
defining Q_XCB_DEBUG and enabling the qt.qpa.input category.
Change-Id: Id2eb7545a7cd07dadd70da31a1f17c2999feec0d
Reviewed-by: Alexander Volkov <a.volkov@rusbitech.ru>
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Bionic on x86 does not have an implementation of ffs(),
for some reason. The declaration is available in
strings.h, but causes a linker error. The toolchain has
a builtin version though, which can be used instead.
Change-Id: Iaf4c27542c1aabe88713842303251db44ae6ba86
Reviewed-by: Jani Heikkinen <jani.heikkinen@theqtcompany.com>
Reviewed-by: Christian Stromme <christian.stromme@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The patch removes several uses of the private Q_PI constant and removes
the qmath_p.h from the includes. A few places are optimized to multiply
with reciprocals instead of dividing by Q_PI.
Change-Id: I097af6a929e0609d6935563064e81c856005f4bc
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
In the case of Windows Embedded Compact we need to delete the destination
file before doing the move if DeleteAndRenameFile has failed since
MoveFile will fail if the destination file exists.
Change-Id: I29d04c147bf8b6b5de850fd7da7bb3dc6a827f1d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
If direction is null, any valid orientation fits, so that the resulting
matrix must be valid.
Change-Id: Ie8060f44801822ee337b25f75fb275bd02223fe8
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Remove two definitions and one function not used anywhere in the Qt
source code.
Change-Id: I275e7c7a2d52dd4ac90cc9e6c782cbdfc14791f3
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This change addresses two issues that affect generating .tags files
in QDoc:
- Paths written to the .tags file are now always relative to output
subdirectory, i.e. the same folder where the file is created in.
- Opening the file for writing no longer fails silently. If the
'tagfile' configuration variable specifies no path, or the path
does not exist, the file is written to the output directory by
default.
Change-Id: I23ac529dbfa67575ae96da1c3123ea487cd664f5
Task-number: QTBUG-44366
(cherry picked from commit 5113fdeb7d)
Reviewed-by: Martin Smith <martin.smith@digia.com>
qdoc could only parse the using clause where the 'using'
keyword was followed by 'namespace'. Now it can parse
using clauses with or without 'namespace'.
Change-Id: Ic4aad025c00b3bda2bc1cbd52d0ba8dbbad653e5
Task-number: QTBUG-44553
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
- Online CSS tweaks: Max-width, font-sizes,
font-weights to improve readability, other
minor fixes
- Remove duplicate include statement and unnecessary
definitions for online template
Change-Id: I713bddd0e175235668c4d9790d0df58b4131d19f
Reviewed-by: Martin Smith <martin.smith@digia.com>
