This will hide the configuration summary and cmake feature summary and
found packages output upon reconfiguration.
Pick-to: 6.2 6.3 6.4
Task-number: QTBUG-104128
Change-Id: I42270b99e45076052ec176df4652661cae10ac0c
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
or when feature changes are detected, even when the log-level is set
to NOTICE (which is the default for non-developer-builds).
We want to show the summary during the first configuration so we don't
force users to look into the config.summary file.
We want not to show the summary upon reconfigurations, to keep regular
reconfigurations as quiet as possibe, so it's easy to notice any new
warnings.
Amends e2a0ddbb69
Amends 384dfceb53
Pick-to: 6.2 6.3 6.4
Fixes: QTBUG-104127
Change-Id: I506f33b4bae9da8957e04bb69c206bf00e3f7b0e
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
If we are going to append an else clause, keep it on the same line as
the closing brace.
Change-Id: Idfa0eec49240086dc24268aebbf610d64a2f53d0
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Cross-builds already were out-of-source.
Move non-cross-builds to out-of-source as well.
Fixes: QTBUG-82820
Fixes: QTBUG-96513
Change-Id: I5bef08f18a16e51fe2c501565699494b46546f84
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
FindWrapSystemHarfbuzz.cmake relied on pkg-config to find system
harfbuzz. This patch makes it find system harfbuzz even if pkg-config
is not available or disabled.
Pick-to: 6.2 6.3 6.4
Task-number: QTBUG-103894
Change-Id: I2a8fc64c738c7604f47de89f387002e40a9fa5e0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We need to check whether pkg_check_modules returns success before
setting up target name etc.
Pick-to: 6.2 6.3 6.4
Fixes: QTBUG-103894
Change-Id: I12702639683723d976e93be95443099b88885869
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Turning off pkg-config with the configure flag -no-pkg-config did not
work. There are different defaults for FEATURE_pkg_config on different
platforms (e.g. Linux: ON, Windows: OFF). The existing code that
calculated the initial FEATURE_pkg_config value assumed that the default
is OFF and never turned the feature off.
Pick-to: 6.2 6.3 6.4
Fixes: QTBUG-104123
Change-Id: I33b9687c55c60d4ec9224324951a8838741ee976
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It's easier to remember what "SIGSEGV" means instead of "11".
GNU libc has offered sigabbrev_np() (non-portable) since 2.32; for older
libcs, we'll be happy with a hardcoded list.
Selftest updated to match... though it didn't seem to be necessary.
Pick-to: 6.4
Change-Id: I5ff8e16fcdcb4ffd9ab6fffd16ebc66ecf6e9465
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Fixes warnings such as
qtbase/src/corelib/text/qlocale_tools.cpp:321:5: warning: 'sprintf' is deprecated: This function is provided for compatibility reasons only. Due to security concerns inherent in the design of sprintf(3), it is highly recommended that you use snprintf(3) instead. [-Wdeprecated-declarations]
from AppleClang.
Pick-to: 6.4 6.3
Change-Id: Ief10e99abfa0a56c24622ac79db719dde58a4210
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Give this a chance to ever succeed by not using undefined variables in
the test code.
Found by a KDE unit test observing changes in inotify behavior between
Qt5 and Qt6.
Pick-to: 6.2 6.3 6.3.1
Change-Id: Iceb743d88dfa093c02d76ce32ea5c8ced24bfc5b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Two patches applied to upstream release.
Pick-to: 6.4 6.3 6.2
Fixes: QTBUG-103732
Change-Id: Id64b65c4567433806047a2a34fa85ab5f260e6cc
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It's disabled now, so can be deleted
Pick-to: 6.4 6.3 6.2
Change-Id: I0d548327e7ef42bbca9ed88556bf9f8456038cc7
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
DPI_AWARENESS_CONTEXT_PER_MONITOR_AWARE_V2 might not be supported
on some legacy Windows 10 editions (prior Creator Update). In this
case SetProcessDpiAwarenessContext returns ERROR_INVALID_PARAMETER.
Fallback to DPI_AWARENESS_CONTEXT_PER_MONITOR_AWARE using old API
SetProcessDpiAwareness in such cases as the most suitable.
Fixes: QTBUG-103733
Pick-to: 6.3 6.4
Change-Id: I39216e63ecfcae96aaa159237a52b0a76bc5d956
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Classes to aid Android development are currently available in the
CorePrivate module. In order to have correct information for
the requisites table (for CMake and qmake inclusion), document
the private module, mark it \preliminary, and link the classes
to it using the \inmodule command.
Fixes: QTBUG-103865
Pick-to: 6.3
Change-Id: Id913148751ab925eb4e8488aa28a54b0e0c2d78d
Reviewed-by: Nicholas Bennett <nicholas.bennett@qt.io>
CodeChecker noted that both QDateTime::Data and QTimeZone have
incomplete rule-of-five method sets; and two of the former's methods
should be noexcept. Marc tells me the copy constructor can be
noexcept. Added the missing methods and noexcepts.
Change-Id: I8ddaa86207320606a890e90bd2b1593ee82f5a4a
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The nameBegin variable was already initialized to pos, so just
increment it in the one case that needs it rather than resetting it in
both branches of the condition.
Change-Id: Ia0d42b604ed21829dc84c27a1907c345f62594d1
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
CodeChecker points out that QTimeZone::systemTimeZoneId()'s first
attempt saved its result in a const QByteArray, which consequently
wasn't moved from when returning. That doesn't make a huge difference
for a CoW, but might as well skip the const and let the compiler do
the natural thing.
Change-Id: I966c9137505a8188532b164524dd4e05c0b2ac53
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
CodeChecker says:
std::move of the variable 'parts' of the trivially-copyable type 'QCalendar::YearMonthDay' has no effect; remove std::move()
So don't bother with the move, and remove && from the signature of the
function being called in all four places. Assert that the type *is*
trivially copyable.
Change-Id: I3c07491b4b1dafdf52916e8699561c58c24ee954
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Using QSettings with Content URL in Android failed because of 3 issues:
* the lock file assumed that it could append ".lock" to the file name
for its name
* the lock file assumed that it could write in the same directory as the
file
* the QSaveFile used by QSettings requires direct write on content URL
but setDirectWriteFallback is set to false on QSettings by default
This patch fixes those issues by, when it is an Content URL in Android,
saving the lock file in QStandardPaths::CacheLocation and setting the
setDirectWriteFallback to true.
This does not break backwards compatibility because appending ".lock"
to the Content URL will always make an invalid URL, so it did not work
before.
Fixes: QTBUG-103455
Pick-to: 6.3 6.2
Change-Id: I92867577507b7069e4e6091d94e0931bb6dbcbed
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
The struct iovec conversion functions that are needed on Unix are
unused on WASM build. This makes the build fail with -Werror on Mac
since the WASM build is treated as a variant of Unix. Cross-compilation
with clang:
Apple clang version 13.0.0 (clang-1300.0.27.3)
Target: arm64-apple-darwin21.3.0
Fixes: QTBUG-103974
Pick-to: 6.3 6.4
Change-Id: I34c65a18832ceedb9064a98f5729e45667749461
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add missing '\since' version numbers.
This commit amends cc6d984390
and 0681a2dd5a
Pick-to: 6.4
Change-Id: Ia10b991c996fb58f08a17e485c4dfcbfbe8eba0a
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Qt Creator passes -DANDROID_NDK to the main project configuration
whereas the Qt toolchain file expects -DANDROID_NDK_ROOT.
This causes the configuration of the sub-builds to fail not finding
the android toolchain, and trying to use the CI ndk toolchain path.
Make sure to consider both variables.
Also change the conditions to evaluate the variable as a variable
explicitly, to avoid passing an empty option if the variable is
unset. If the variable is unset, CMake would treat the variable as
an actual string which would always not equal the empty string.
Amends d6919b073a
Pick-to: 6.3 6.4
Task-number: QTBUG-104013
Task-number: QTBUG-102041
Change-Id: Ifee48953ce50bc616c49c59d72e845c6d9418187
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Skipping moveToTrash() test is needed because WebOS
does not implement a trash bin directory.
Fixes: QTBUG-104053
Pick-to: 6.4
Change-Id: Id1d1595eb401d8ef3a403c915d95be1cd75368d2
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The assertion has the acquire fence at the wrong place:
- QThreadData::thread isn't dereferenced, so the acquire fence on its
load() isn't needed.
- QObjectPrivate::threadData, however, _is_ dereferenced, so an
acquire fence is needed; the relaxed load() is insufficient.
Swapping the loadAcquire() and the loadRelaxed() fixes both issues.
Pick-to: 6.4 6.3 6.2 5.15
Change-Id: Iee964490e93ebc323c188e616bf0d448f91fb2b5
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Removes another owning container manipulation that made the top entry
in Clang -ftime-trace's most-expensive template instantiations in a
QtWidgets build.
Pick-to: 6.4
Task-number: QTBUG-97601
Change-Id: I8c765ea2e6c46da5188b70c9503dd87e63f6b328
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
For alignas and aligof as macros up until C2x makes them full keywords.
Change-Id: Ibcde9b9795ad42ac9978fffd16f2bbc054027384
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Terminating a thread that we don't have full control over might leave
mutexes or critical sections locked, ending up with an application that
can't allocate memory or open new windows.
Also, if terminating of the thread would fail (which the code tried to
handle), then deleting the QThread anyway would have triggered the
assertion that we don't delete a running thread in ~QThread.
So simplify this code: wait simply returns true if the thread isn't
running anymore, no need for the double-check. Leave the thread running
and leaking if it is stuck somewhere in Windows APIs while executing the
native dialog.
Fixes: QTBUG-103984
Change-Id: I34aa42cbde7c769a58c14bf524781cf3abd13b70
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This implements the recent functionality extension of painting
cosmetic (untransformed) brush patterns, and the corresponding
NonCosmeticBrushPatterns render hint, in the pdf and opengl paint
engines.
As part of the implementation it also fixes a couple of pre-existing
bugs in the opengl engine, relating to updating the brush after
changes in transformation or brush origin.
As a driveby, it also includes a minor fix for the lance testing tool:
request stencil buffer, as that is needed and not always provided by
default. This echoes a recent fix done to tst_baseline_painting.
Change-Id: Ia8811477e015eebeb40ed138bca96643ce1ab0dc
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Let it to be deduced, otherwise it may force instantiations which
are ill-formed.
Change-Id: I3ce674128d96a48ad6883e265734ff330645dd75
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
The EDID standard defines 4 x 18 byte descriptors:
54-71: Descriptor 1
72-89: Descriptor 2
90-107: Descriptor 3
108-125: Descriptor 4
Immediately following the 4th 18 byte descriptor are the following:
126: Number of extensions
127: Checksum
Therefore the number of data blocks (known as descriptors in the EDID
standard) should be 4 instead of 5.
Pick-to: 5.15 6.2 6.3
Change-Id: I63555b9142125df17b26401d81a6717936832162
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
Like Q_ASSERT(), which was fixed for 5.10, it's also useful if
Q_ASSUME() expands to an expression instead of a statement. This way,
it's usable in more contexts, esp. the comma operator.
[ChangeLog][QtCore][QtGlobal] Q_ASSUME() now expands to an expression
(was: statement).
Change-Id: I33dc3d1551a1b7454aa9587b9c33dfa2e3d2b09c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Both QtWeSockets and QtHttpServer has a QSslServer class that is useful
elsewhere. They are different though, so the new class has features
from both versions.
[ChangeLog][QtNetwork] Unify QSslServer from QtWebSockets and QtHttpServer into QtNetwork
Task-number: QTBUG-100823
Change-Id: I523f04db39297ceb9b258f673eb12deecfc6886c
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The new signal pendingConnnectionAvailable is emitted after a new
connection has been added to the pending connections queue. Connect
to this signal and call nextPendingConnection to handle incoming
connections.
The existing unchanged newConnection signal is emitted after the
overridable function incomingConnection is called, regardless of whether
a new connection is added to the pending connections queue in the
incomingConnection function or not.
If a subclass that overrides incomingConnection either decides to not
add all incoming connections to the pending connections queue, or to
postpone adding the connection until a handshake is successfully
completed, the pendingConnectionAvailable signal should be to used,
because this signal directly corresponds to insertions to the pending
connections queue.
[ChangeLog][QtNetwork][QTcpServer] New signal pendingConnectionAvailable
is emitted when a new connection is added
Task-number: QTBUG-100823
Change-Id: I00c76761389065f68271553e69e6c45c393a2fa8
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The time was getting printed twice for the stack trace, but zero for the
watch dog if the stack trace was disabled.
Selftest appears to pass (though I thought it shouldn't).
Change-Id: I5ff8e16fcdcb4ffd9ab6fffd16ebc4ec99e7fc5a
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Move static arrays into new qprint.cpp file to avoid them being
duplicated in many translation units.
Fixes: QTBUG-102302
Change-Id: I47b7a6244e45672788792ec1a28d4fed20d233a3
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
The old code allocated a stack buffer, but asked the runtime to
zero-initialize it. That's 1KiB of writes to the stack on every
QCOMPARE and QVERIFY before any actual work is done. Fixing this
little laissez-faire to just initialize the first character in the
buffer results in nice little speedups of ~40%.
This fixes the issue in reportResult(), a Cut'n'paste from compare()
and verify(), which have since been fixed by a previous commit.
Change-Id: I5cad57299490925b88e768dc751304699274db2e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
[ChangeLog][QTestLib] QCOMPARE now evaluates toString() on its
arguments lazily, speeding up the general case where the comparison
doesn't fail. This is true for the QCOMPARE functionality provided
by Qt. If you specialized qCompare() for your own types, then you
need to change its implementation in line with Qt's own qCompare()
specializations in order to enable this feature.
[ChangeLog][QTestLib] QCOMPARE calls with nullptr argument(s) will
now print the actual and expected values upon failure.
Previously it was not like that because of the compareHelper()
overload in qtestresult.cpp that treated the presence of
nullptr-arguments as a reason to ignore formatFailMessage() call.
New implementation does not have this check, and correctly
executes formatFailMessage() for all arguments.
Note that the qCompare() overloads that call QTestResult::compare()
internally were not affected by this patch, because they already
defer toString() invocation until the comparison fails.
Some numbers, collected against shared release developer build.
I checked how this change affects the test execution. The idea was
to pick some tests for types that do not have a specific
QTestResult::compare overload, so I picked a couple of QByteArray
tests.
The comparison is done by running a test 10 times and taking the
average execution duration, as reported in the log.
tst_qbytearrayapisymmetry:
Before: 15.6 ms
After: 14.2 ms
tst_qbytearray:
Before: 41 ms
After: 36 ms
The benefit is around 9% and 12% respectively.
Fixes: QTBUG-98874
Change-Id: I7d59ddc760168b15974e7720930f629fb34efa13
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
This allows to defer the toString() invocation until it is really
needed, and so allows to speed-up the test execution.
I was testing a release shared developer build, running
tst_QStringApiSymmetry 10 times before the change, and 10 times after
the change, and then taking the average execution duration, as
reported in the log.
Before the change (using QCOMPARE): 51ms
After the change (using QCOMPARE_EQ): 45ms
As we see from the results, the benefit is around 10%.
Task-number: QTBUG-98873
Task-number: QTBUG-98874
Change-Id: Ifcfbcca1f2c1eaf82c7f1a9098fa1512a269cbf8
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
[ChangeLog][QTestLib] Add QTRY_COMPARE_{EQ,NE,LT,LE,GT,GE}_WITH_TIMEOUT
macros that repeatedly execute QCOMPARE_{EQ,NE,LT,LE,GT,GE} until either
the comparison returns true or the timeout expires. Also add
QTRY_COMPARE_{EQ,NE,LT,LE,GT,GE} macros that simply invoke the
*_WITH_TIMEOUT versions with the usual timeout of five seconds.
Task-number: QTBUG-98873
Change-Id: Ib0d7d1c8c997f442b46acd85da738a8f512cc875
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
[ChangeLog][QTestLib] Add QCOMPARE_{EQ,NE,LT,LE,GT,GE}()
macros. These new macros behave similarly to QVERIFY(a op b),
where 'op' is ==, !=, <, <=, >, >= respectively, but print
a formatted error message with argument values in case of failure.
The formatting is done lazily, which means that the strings will
be generated only when the comparison fails.
Also add a new test for tst_selftest and generate expected output
for it.
Fixes: QTBUG-98873
Task-number: QTBUG-98874
Change-Id: Ic8074798901d7a469b1f58d5cd28bbf49a3da1db
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The TAP test logger will now correctly print comparison types such
as QCOMPARE_NE or QCOMPARE_LT, and also provide a proper expected/wanted
value (by adding proper arithmetical operators in front of the value).
Sample output:
type: QCOMPARE_GE
message: Left value is expected to be greater than or equal to right value, but is not
wanted: >= 1 (rhs)
found: 0 (lhs)
expected: >= 1 (rhs)
actual: 0 (lhs)
at: tst_ExtendedCompare::compareUnregistereEnum() (tst_extendedcompare.cpp:232)
file: tst_extendedcompare.cpp
line: 232
As a drive-by: make some variables const.
Task-number: QTBUG-98873
Change-Id: Idb54eaabcb937b42d3fc844f30041aab82d73f69
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The compare() implementation made its actual and expected seem to have
different types (using a typedef name for one, when the other was of
the type that expands to) and the formatter it used was needlessly
clunky. Use modern string literals and package a repeated
null-or-quoted representation as a lambda, inline the resulting
simplified prettyElement() into prettyPair(), which can now just take
a pair rather than an iterator. Short-cut the empty list so that the
comma-joined accumulation could initialize with the first entry and
loop over the rest, always joining with a comma.
Undo commit f776595cc10aaafc7162f382a8fa11afffb0e708's mistaken update
to the copyright header and update correctly.
Change-Id: I99258dafa01e79f9ec384d9b375a59376eb7fb53
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We were querying the traitCollection property of the application's
keyWindow in order to determine the appearance mode (light/dark) of
the app.
However, the application may not have a keyWindow (visible window)
by the time the we set up the appearance mode, so get that information
from the last window in the application's windows array instead.
Change-Id: If7435d9f565b5c594a26027c971c16a1e3a9af26
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The old code allocated a stack buffer, but asked the runtime to
zero-initialize it. That's 1KiB of writes to the stack on every
QCOMPARE and QVERIFY before any actual work is done. Fixing this
little laissez-faire to just initialize the first character in the
buffer results in nice little speedups of up to or exceeding 2x.
Amends d946507727.
[ChangeLog][QtTestLib] Optimized successful QCOMPARE and QVERIFY for
an up to 2x speedup.
This has the potential to meaningfully reduce the load on the CI, so
picking all the way to 5.15.
Pick-to: 6.3 6.2 5.15
Change-Id: Ib93d69282ec87cbd26a60e4ac14413e8cef8ff78
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
