Also fixed Direct 2D feature detection test for MinGW.
Task-number: QTBUG-83932
Change-Id: I8c89aaa953d34de40fdf7b51e0859c791aeb38ef
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
I noticed that QDTP has a mutable member, text, which gets set at the
end of each call to parse(); this makes all the in-out parameters
redundant, since relevant methods can simply access - and modify -
text, if it's set *at the start* of parse instaed. (There are no early
returns to complicate matters.) This also makes StateNode::input
redundant.
At the same time, rename the mutable member, as several methods shadow
it with parameter or local variable names; it is too generic.
Change-Id: I2259cd87de5c84201b25c9633d11e59a4a4d57a1
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There were duplicates; there was neither rhyme nor reason to the order.
One was conditioned on a deprecated old define.
Change-Id: Iba390f4a83758418379fb5fc522f08ada3e41d12
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Use std::hypot() instead of sqrt() of a sum of squares.
This ensures length() can't be zero when isNull() is false.
Use length() in QLine::setLength() rather than duplicating that.
Clarify and expand some documentation; isNull() never said what
constituted validity, nor did unitVector() mention that is should not
be used on a line for which isNull() is true. Make clear that lines of
denormal length cannot be rescaled accurately.
Given that we use fuzzy comparison to determine equality of
end-points, isNull() can be false for a line with displacements less
than sqrt(numeric_limits<qreal>::denorm_min()) between the coordinates
of its end-points (as long as these are not much bigger); squaring
these would give zero, hence a zero length, where using hypot() avoids
the underflow and gives a non-zero length. Having a zero length for a
line with isNull() false would lead to problems in setLength(), which
uses an isNull() pre-test, protecting a call to unitVector().
(It was already possible for a null line to have non-zero length; this
now arises in more cases.)
Restored QLine::setLength() to the form it had before a recent change
to avoid division by zero (which resulted from underflow in computing
the length of a non-null line) but allow for the possibility that the
unit vector it computes as transient may not have length exactly one.
Add tests against {ov,und}erflow problems in QLine. Reworked the test
added during the divide-by-zero fix to make it part of the existing
test.
Pick-to: 5.15 5.12
Change-Id: I7b71d66b872ccc08a64e941acd36b45b0ea15fab
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
addBFail() asserts on the file being non-null. The convention seems to
be "Unknown File" for cases where we cannot determine the file.
Change-Id: I3a4d0130352d77d75f264fad6f3bd47c6700ef4c
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
To avoid big artifact sizes, strip the binaries and libraries upon
installation. This achieves stripping similar to QTBUG-69767 and
QTBUG-81301 but arguably in a cleaner CMake way.
See comment on PS34 of the unmerged commit
90b09fee44b08b65a436fd15fda2526e242f7b21 for details.
Task-number: QTBUG-86053
Change-Id: I3ed929a8a7c74b88c480543212fc9551d8bde77f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Changed QtConcurrent algorithms to take the passed sequences as
universal references, where it makes sense. In addition to avoiding
to create extra copies when passing rvalues, this change allows
passing temporary container adaptors to QtConcurrent::map (e.g. see
the example in the ticket and the new test-cases).
Task-number: QTBUG-83170
Change-Id: Ia7c0833f4ec1d860294fa5214cd53934b65ff084
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Add the missing call to QScreenPrivate::emitGeometryChangeSignals()
along with an emission of physicalDotsPerInchChanged()
since that is calculated from geometry and physical size.
Rearrange the code in
QGuiApplicationPrivate::processScreenGeometryChange()
to prevent duplicate emissions of geometryChanged(),
physicalDotsPerInchChanged() which this change would introduce.
Amends 5290027e3b.
Pick-to: 5.15
Task-number: QTBUG-76902
Task-number: QTBUG-79248
Fixes: QTBUG-86604
Change-Id: I3dc2ec5ccd9c6413e92f9246242f323e8afc5e57
Reviewed-by: David Edmundson <davidedmundson@kde.org>
When the default printer supports a duplex mode other than DuplexAuto,
the unit tests change to QPrinter::PdfFormat and expect that
the pdf printer is in duplex mode then. However, the pdf printer
does not support duplex mode.
This patch removes this check.
Change-Id: If394f9f23fd244713bbb1ecce9d3802cbd281d90
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Use a simple and straightforward container that only does what
we need here.
Change-Id: I1a81b53a58bc91d533e3d7df5471a1362046825d
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
To match QString and QByteArray behavior
Change-Id: Ifce4a5dee6fc9077e855a24499f11f911e359cf5
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Even if we don't reallocate or detach.
Change-Id: I44928c261f037b304de8ee6135b96f00dd217c51
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
ChangeHandler's evaluated the binding to detect if the value actually
changed. This is a valid strategy for lazy bindings, but eager bindings
were already evaluated at that point, and thus the change would not be
detected.
Change the binding loop test, so that there isn't a fixpoint in the
binding loop, and we can still detect it. Changing the binding loop
detection code to deal with this case is left as an exercise for the
future.
Change-Id: Ia5d9ce2cd98a5780e69c993b5824024eb186c154
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
After 66d6030924e968dffd98ba88d1382e8b08cc521d those are located in
qtqa instead
Pick-to: 5.15 5.12
Change-Id: I2b07638d30affe3e2826a231a31d34cfe7e9e4c6
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
When converting a const variable to a non-const variable, use the conversion operator
Change-Id: Ib1c8f3defbf9ccce1af5c90e7e9c508bc8c039d0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
We don't build on platforms without stdint.h
Change-Id: Iee9de3e71a7bcae524f2d1377919cf074a713960
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The documentation of convert promised that “If the cast cannot be
done, the variant is still changed to the requested type”. This was not
the case so far, because we returned too early if canConvert returned
false.
This commit changes the behavior of the method to reflect its
documentation. The documented behavior seems more useful than the
alternative of not changing the metaType, at least for common use cases
inside qtdeclarative.
Change-Id: I09b5a5efb7344e76e93de278e35c7fb2b2f87dcd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QXmlString is an internal class, so qdoc cannot tie the member function
documentation to anything. Since "swap" is rather self-explanatory anyway,
we can just remove the (somewhat oddly placed) documentation.
Change-Id: I3d47219a628ba3d3e5ecd0c825eeff71908d07e9
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
HostInfo is used in places whenever QT_HOST_PATH is set, regardless
whether CMAKE_CROSSCOMPILING is set or not. Make sure that HostInfo
is available when QT_HOST_PATH is set.
Change-Id: I39763a61d77e97dc9c4cc3875bce4deb942f870a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This reverts commit b1ef104866.
This test is BPASS on openSUSE_42_3 for 5.12 and PASS on openSUSE_15_1
for 5.15.
Pick-to: 5.15
Pick-to: 5.12
Change-Id: Ia1d81ed38491c27c01f270623c5082663f4da699
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
The logic was complex and missed the UTF-8 UTF-8 case. It ended up
calling the UTF-8 to Latin1, resulting in an improperly-sorted
container, which in turn meant keys were not found when searched.
Fixes: QTBUG-86873
Pick-to: 5.15
Change-Id: I0d3ff441bec041728945fffd16379dec418637ca
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Deprecated from 6.0, but necessary for migration.
Change-Id: Idb1264e6ecca9400086970c15270b803c8fd391b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Nullptr memcpy, memmove and 36 bit shift of integer.
Change-Id: Ib79c8a98a710d021fc93b6aaec6c0ba9bde5f91e
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We were missing 64-bit signed mul_overflow on 32-bit platforms and in
those where we did have it, the detection was awful (both for signed and
for unsigned). So if one of the parameters is a constant, we can
simplify the code generated.
Change-Id: Ia99afccf0c474e20b3ddfffd162a60d269eb1892
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Movable in Qt is confusing since C++11. Our code also relies on wording
with "relocatable" and "movable" is mostly a backwards-compatibility thing
Change-Id: I28f5a61b4482aa1dd26c7b760d78be031d11ef10
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Introduce a category for debug/warning prints coming from connect()
and related functions. As a drive-by, rename and complete the
usage of logging categories for connectSlotsByName().
Change-Id: Ieb2d8641df856c8c60317757eda80dc5f9375130
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Take only the three things we need. Otherwise we waste time on copying
data that is not even relevant to buffer updates at all.
Change-Id: I5ed6ae647e23c6f1d0f5f1d973bead2e008f06cc
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Also bump the non-heap buffer size in the binding list to 16,
in order to accommodate complex Quick3D materials with many
associated texture maps.
Change-Id: Id190e5f8304f5941cffc41a2605fce45dfeb72f0
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Because we will iterate through this list and issue a memcpy
for each entry. Better to keep it sorted based on offset to
be more cache friendly.
Change-Id: Ie9dcb259e9a543937cbdcdea85aec9eb92dba1b1
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
The semantics are not very intuitive, and it opens a can of worms
with regards to what should happen with observers that observe
that property.
Change-Id: I6fb00b7693904b968224cc87d098bbd0ea776ba3
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
In the internal hash map implementation, we have to ensure that the
index is in the interval [0, size - 1].
Moreover, in setBinding we have to refetch the binding storage in case a
reallocation happened.
Change-Id: I11c6264f16537699c8908b647e2355a39ce87648
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Add qt6_android_get_sdk_build_tools_revision() function to get the
Android SDK build tools revision, the logic is moved from
QtPlatformAndroid to Qt6AndroidMacros. The update QtPlatformAndroid
header comments.
Task-number: QTBUG-85982
Change-Id: If3e5b46fa583f929a24794792c9d5a52beb83990
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Simplify rounding to get rid of hacks to make lines meet up again. This
also results in better looking drawing results in general.
Task-number: QTBUG-25896
Change-Id: I48f08f0e7bd7ff869d6767f7bac2a18c2d280615
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
These value gaps were there for binary compatibility, but we don't need
those in Qt 6.
Change-Id: I72a40d601b61f90e14562578e88493b0d54ff398
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The unit tests of QPrinter assume that a printer which is default-
initialized is the same printer as the default printer. However, when
no printer is set to default, this is not the case. When no printer
is the default printer, a default-initialized QPrinter will be the
first printer found.
This patch adapts the unit tests to work also when no printer is the
default printer, even though printers are available.
Change-Id: I4967e5b1c4fb8a7c33c911184289ec5cd283fc58
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This adds 'Inherited by:' links to print support classes deriving from
Qt GUI types.
Pick-to: 5.15
Task-number: QTBUG-77126
Change-Id: I84ecee5df8cae0635d42653b1483db6b3c6074ee
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Class QObject is the most widely used base class in Qt. It is
inherited by a great many Qt classes.This update sets the depends
variable in qtcore.qdocconf to '*' so that QDoc will load all the
index files for all of Qt, when it generates the documentation for
QtCore. In particular, this will ensure that the "Inherited By"
list for class QObject will show all the Qt classes that inherit
QObject.
Pick-to: 5.15
Task-number: QTBUG-77126
Change-Id: I5f38400ccc798ec34e2ee80472f1fe9bb7b1877d
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
