The documentation wrongfully recommended deleting QTextFrames
directly. This would cause a crash, since the destructor didn't
update the document's layout at all. The correct way is the same
as when removing other aspects of the document.
Task-number: QTBUG-53082
Change-Id: I64f0ad08f1d063626456fa51d03611871ce6aa45
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Fix a warning about a missing case statement.
Change-Id: Ic89646704d62668cf83c463dbf6e9b549a4b5200
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
The test should not depend on qWait explicitly
Change-Id: I13c01c47c9f7bae8b0c30afa2ac8550dc0fbf028
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
7edd10e6c added this compression feature, but it's not a good idea for
drawing-tablet applications, because smooth drawing depends on receiving
every movement of the stylus.
Also show the device ID in qt.qpa.input.devices category logging.
[ChangeLog][X11] The new X event compression feature that was added in
5.6.0 no longer applies to motion events from drawing tablets.
Task-number: QTBUG-44964
Change-Id: Icd2ca8ca77d8f80c2f39160c74208db10e382501
Reviewed-by: Gatis Paeglis <gatis.paeglis@theqtcompany.com>
This can be enabled with QT_MAC_DONT_OVERRIDE_CTRL_LMB=1
environment variable. The goal is to provide consistent
cross-platform input when it's more desirable than full
platform comformance.
Change-Id: I3b96733077bd1c0367edeef21a98a44b15425807
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
EGL headers including X headers has traditionally been problematic due
to getting macros for Status, None, etc.
In most cases this is not an issue anymore because on embedded one will
almost always use a driver targeting the framebuffer or DRM/KMS and
therefore the EGL headers do not pull in X dependencies.
Furthermore, Mesa supports MESA_EGL_NO_X11_HEADERS which we set, avoiding
the problem altogether with Mesa regardless of targeting X11 or KMS.
However, other drivers do not have this option. On i.MX6 for instance,
targeting X11 is problematic due to not having EGL_API_FB defined, which
in turn means the EGL headers pulls in X headers in order to be able to
define the native display and window types as Display and Window.
Try to play nice with this use case by reshuffling the includes and
undefining the problematic names.
Task-number: QTBUG-52928
Change-Id: I059f26b340b6e442e7296055915d18f5a1ce7a7f
Reviewed-by: Louai Al-Khanji <louai.al-khanji@qt.io>
Prompted by Coverity CID 11720 (allegedly recently new in dev but
long-standing in 5.6). Even assuming the class is used correctly -
test initialize() and only use if that succeeded - the destructor
would have passed uninitialized arguments to munmap() and ioctl().
Noticed a double close along the way: it's been fixed on dev but
should have been fixed in 5.6, too. Documented why ioctl() failure in
switchToGraphicsMode() should at least do no harm.
Change-Id: Ie26a9eefa435b5ff5b1a02e03e29469b8db72d3c
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
while they are not built, their sources should be installed as long we
don't delete them completely.
Change-Id: I5e628e96cc9715520cb6e5aadb2cae61d1d03a4f
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
it was not built at all (and didn't build with qt in a namespace), and
consequently was not installed as well.
Change-Id: I24d8ac4dd5d70927c262ad6336e5ee32a0fd003a
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
as in other examples which come with plugins, use an additional
hierarchy level which contains the app and plugin subdirs.
Change-Id: I2487755967aa3474c337c8c8af10be49627b63d0
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
Make REDUCE_EXPORTS the default for QNX. This is what the Linux builds
use. The Windows builds should too.
Turn on ICU detection for QNX. QNX has ICU.
Task-number: QTBUG-52578
Change-Id: Ie65c6ff03c4eecf361727b3b6026338f686d9749
Reviewed-by: Dan Cape <dcape@qnx.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
We don't know why it happens, so let's apply a workaround. See the
comment for more details.
Task-number: QTBUG-53031
Change-Id: Ifea6e497f11a461db432ffff144972e892fbbda5
Reviewed-by: Roland Winklmeier <Roland.M.Winklmeier@gmail.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add more error messages on failures.
Task-number: QTBUG-25367
Task-number: QTBUG-25368
Change-Id: I064143a058b7b98d9d5eecab8b5da49f5307e1eb
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
this makes it fully consistent with INSTALLS.
note that this also removes the file name from the target path when
copying files, also for consistency.
Change-Id: I69042c9aa1e2cc81f8ff982343ba25688a04abfd
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
- QMAKE_FILE_IN_EXT as an alias for QMAKE_FILE_EXT, for consistency with
QMAKE_FILE_IN_BASE
- QMAKE_FILE_IN_NAME to make pairing _EXT/_BASE to get a full name
unnecessary (finally ...), and make use of it
- QMAKE_FILE_OUT_PATH, because i'll need it
Change-Id: I3d91ddb84f9cce52a665d562da11d165c92550c8
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it's beyond me why they shouldn't be.
Change-Id: I2493469636e4f196bfeb2eb00a691aeae0f1881d
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
newer versions of qt creator understand QMAKE_EXTRA_COMPILERS and
INSTALLS, so there is no need to list the files twice.
Change-Id: Iccf3cc3248daf3422b8c366c2eb2d2f46c5f08d1
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
On iPhone 6(s) Plus devices, or when display zoom is enabled in an iPhone 6,
the render buffer is scaled before being output on the physical display.
We have to take this into account when computing the physical size.
Task-number: QTBUG-50941
Change-Id: I318f3a866d039fccf0ba08f381fc9d8bcd676acd
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@theqtcompany.com>
Ensure we don't round a underline position beyond the descent in our
eagerness to avoid underlines too close to baseline.
Task-number: QTCREATORBUG-15851
Change-Id: I9a29447bbcb938b7e9fb29d52fd392a1340d07c5
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Implementation of QFileSystemEngine::copyFile() uses CopyFile2() as if
it is CopyFile() function, but CopyFile2() returns HRESULT, not BOOL.
So the success should be checked by "SUCCEEDED()" instead of "!= 0".
Current implementation does exactly the opposite because S_OK == 0.
Change-Id: I0677d54447d22366fb2031e0b928a3d10e24c0ed
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Unfortunately, the improved patch for QTBUG-45812 fixed things for
Chromium, but did no longer work for Emacs. This fixes commit [269fdb]
to make it work for both Emacs and Chromium.
Task-number: QTBUG-45812
Change-Id: I2fca708503f27679681bc6959de1ad94943a063e
Reviewed-by: Dmitry Shachnev <mitya57@gmail.com>
Reviewed-by: Błażej Szczygieł <spaz16@wp.pl>
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
The store to guard in the inner function's critical
section was not synchronized-with the load at the
start of the function:
T1 T2
guard.load()
mutex.lock()
guard.load()
d = new Type
guard.store()
guard.load()
// use d
mutex.unlock()
The use of d in T2 does not synchronize with
the write to d in T1 -> data race -> UB.
Fix by storing with release memory ordering,
so that the guard.load() in T2 synchronizes
with the guard.store() in T1.
Change-Id: I5c1cd1fa097c6397cb0b48b0d8e8012f95978558
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
QWindowsPipeWriter uses asynchronous API to perform writing. Once a cycle
has been started, the write buffer must remain valid until the write
operation is completed.
To avoid data corruption and possibly undefined behavior, this patch
makes QWindowsPipeWriter::write() take a QByteArray, which it keeps alive
for the duration of the write cycle.
Autotest-by: Thomas Hartmann
Task-number: QTBUG-52401
Change-Id: Ia35faee735c4e684267daa1f6bd689512b670cd2
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Q_GLOBAL_STATIC does the thread-safe protection for us. And who said we
could only use non-POD types? We can just use a boolean!
Change-Id: Ifea6e497f11a461db432ffff1449b0a88d75d194
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
It was being stored once in QThreadPrivate and once in QThreadData, with
the latter being hidden as a Qt::HANDLE. Besides saving a little bit of
memory, this also solves a small data race condition that arises from
trying to connect a signal to an object moved to that thread and then
emit that signal shortly after the thread starts. Before this patch,
QThreadData::threadId was initialized only by QThreadPrivate::start(),
which meant that we were racing that initialization with this check in
QMetaObject::activate:
const bool receiverInSameThread = currentThreadId == receiver->d_func()->threadData->threadId;
Task-number: QTBUG-52337
Change-Id: Ifea6e497f11a461db432ffff1449ae01f1099aae
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Fix regression in a7b0cb467c which caused
it to be hard to start scrolling at the ends of a scroll-view if using
fine grained scrolling events.
Change-Id: I55f3210150b993281545c3ad5a7356d892fa30b5
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
the host compiler's version is not determined, so we cannot make any
assumptions about its capabilities.
Task-number: QTBUG-53017
Change-Id: I939fd7402b5daac73f2195b9d8763b9008bc7ea4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Rolf Eike Beer <eb@emlix.com>
The widget is hidden, reshown and tested for active window, which
is flaky. Add a call to activateWindow() which increases
the chances of it becoming the active window should another window
appear.
Change-Id: Ibbecdbc43e2ac9638aec497c47fffaaffa1855af
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
CID 155005: Possible illegal access in string. Some loops were
reading the buffer without checking the bounds.
Change-Id: I910671a6d56808138ec2bb5d96bd7edf78b20f73
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
CID 21629: The QMakeProject::read result was ignored.
MetaMakefileGenerator::createMakefileGenerator will be called if the
project was read.
Change-Id: I9187c82efd1abedcaa8e394f1fdb0b7f35a2b1d7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
On some operating systems, tzdata files carry the Local Mean Time (LMT)
for the city in question, which better represents how time was tracked
before standard, hourly timezones were introduced in the early 20th
century. The test was asking for the data for 1653-02-09 and assumed
that it would find the first Central European Time (CET) rule, which
Germany didn't start using until 1893-04-01.
This fix allows us to remove the blacklist that had been applied to this
test without investigation. It wasn't related to OpenSUSE, aside from
the fact that OpenSUSE tzdata carries the LMT data.
Change-Id: Id5480807d25e49e78b79ffff1449bdaf46901367
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
The reference to trUtf8() made it even more confusing, so remove it.
It's redundant and deprecated anyway.
Change-Id: I9921297160db3660bb5099692bbfdaf6e85637aa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Miter limits below 1.0 are not valid in PDF and trigger an error in the
Reader. This change enforces a minimum miter limit of 1.0, and it adds
a manual test for producing a PDF file demonstrating this issue.
Task-number: QTBUG-52641
Change-Id: I1c78b1c4a44579e95e1cddfb459926d304e60165
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
It was hidden by overridden parent(const QModelIndex &) methods.
See also 63b5082ea8
(Unhide QObject::parent() from QAbstract{Table,List}model).
Change-Id: I8b6d4d4175e4d43ff269eaeb0b2b1a9fb8f44bab
Task-number: QTBUG-45393
Reviewed-by: Milian Wolff <milian.wolff@kdab.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
libdbus will send a local signal if connection gets disconnected. When
this happens, end all pending calls with QDBusError::Disconnected.
Task-number: QTBUG-51649
Change-Id: I5c7d2a468bb5da746d0c0e53e458c1e376f186a9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In addition to pen events being handled as tablet events, we create
touch events. Same principle is used on other platforms as well. This
allows devices as Surfaces to use the pen with Qt applications.
Furthermore, the first update event does not have to be a press event,
as in a pen has proximity values describing a move without touch, but
also the HoloLens uses touch points as permanent pointer devices. They
all send an exit event once released or out of range. Hence, clean up
the internal touchpoint hash when the touch device is gone, not on
release.
Task-number: QTBUG-38681
Change-Id: I38acaa034a3cfe224098bfa36bfead5428f4db16
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
IInputStream::ReadAsync might create a separate buffer to fill in data.
Passing a buffer with GetAddressOf() can cause a memory leak of the size
of data to be read.
Instead, pass a separate buffer pointer and continue to use this one
after the async operation. This way, the OS can decide whether to switch
buffers or not, keeping ref counting in sync.
Task-number: QTBUG-52961
Change-Id: I9dfb627287142355ebcf74ca52427b4e8108e8d1
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
This is not exhaustive, but was enough to discover ICEs.
Change-Id: Ib60be1d298a66b72e3eb9b75ad538f0bf15b5f62
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: Simo Fält <simo.falt@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
