Signed integer overflow is undefined behavior ([expr]/4),
but unsigned arithmetic doesn't overflow, so isn't
([basic.fundamental]/4, footnote there).
So, use unsigned arithmetic for the loop-around serial
number generation in incrementserial(). While we're at
it, also use it for the masking operation in the same
function.
Found by UBSan.
Change-Id: I500fae9d80fd3f6e39d06e79a53d271b82ea8df8
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Left-shifting of negative values is undefined ([expr.shift]/2).
Since hashValue is a uint already, rectify by casting it->key to
uint prior to shifting.
Found by UBSan.
Change-Id: I94a5311f5a4492f514f595b8fb79726df1e7d0de
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The REHASH macro is used in qFindByteArray() with a char argument.
Applying the shift operator promotes (a) to int. The check in
REHASH, however, checks for the shift being permissible for
_unsigned_ ints.
Since hashHaystack is a uint, too, rectify by casting (a) to
uint prior to shifting.
Found by UBSan:
src/corelib/tools/qbytearraymatcher.cpp:314:72: runtime error: left shift of 34 by 30 places cannot be represented in type 'int'
Change-Id: Id09c037d570ca70b49f87ad22bed31bbb7dcc7fb
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This manifested itself in a UBSan report about loading a non-enumerated
value from an enumeration variable:
src/testlib/qbenchmark_p.h:95:7: runtime error: load of value 11091, which is not a valid value for type 'QBenchmarkMetric'
(or similar).
The chosen value is simply QTest::QBenchmarkMetric(0).
Change-Id: I8492a871a71d89fa6f7902d38f9eecee4b060646
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The QPageSize-based refactoring led to casting DevicePixel to a QPageSize::Unit
value of 6 (out of bounds). And then the switch in qt_nameForCustomSize
would leave the string empty, leading to "QString::arg: Argument missing: , 672"
warnings.
Change-Id: I85e97174cc8ead9beccaaa3ded6edfad80f8e360
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Selftests for testlib fail when executed in UTC timezone because local and
UTC are the same, but expected to be different. A custom timezone is used
instead.
Debug output of qCompare does only handle local and non-local timezones, using
new Qt5 features allows to show the correct timezone in format string.
Change-Id: I753884a12370952b7b62a90d62896db4f2d3d1b4
Reviewed-by: Jason McDonald <macadder1@gmail.com>
Lets us print out the interface name in addition to the address when
doing:
qDebug() << myNSObject;
Unfortunately, CFTypeRef is just a typedef to void*, so we can't add a
generic overload for CFTypeRef. For now, we provide operators for
commonly used Core Foundation and Core Graphics types. Additional
types may be added using Q_DECLARE_QDEBUG_OPERATOR_FOR_CF_TYPE.
Change-Id: I27b12ef9e62cb1be348b9771cb31657692903f6c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
...using qHashRangeCommutative(). Also add a test.
[ChangeLog][QtCore][QSet] Can now be used as the key in QSet, QHash.
Change-Id: Ie7c81d257a3b324fc03d394fa7c9fcf0c6fb062a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This allows further QTcpServer inheritance in library. Also,
add protected c'tor for this purpose.
Change-Id: I1a5c0cdedd64bcd41b028e09d7752248506296c7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add possibility to get length and other information of EC based
certificates. Also it is possible to parse those public/private
keys from PEM and DER encoded files.
Based on patch by Remco Bloemen
[ChangeLog][QtNetwork][SSL/TLS support] It is now possible to
parse elliptic curve certificates.
Change-Id: I4b11f726296aecda89c3cbd195d7c817ae6fc47b
Task-number: QTBUG-18972
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use the armle-v7 ones instead.
Change-Id: I981cb4bed7e14cae8f89112df2d1d014db314cd9
Reviewed-by: Wolfgang Bremer <wolfgang@w-bremer.de>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Shadow sampling is an old OpenGL feature (hello, OpenGL 1.3!), which
was missing from QOpenGLTexture. This commit adds the relevant support.
Change-Id: I9f6b552d806a356d24ee08121af6bc9ce684f2b5
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Can be used by applications to send hardware buffers directly to the
hardware compositor, if available. The primary usecase right now
will be from QtWayland to 2D composition of surface by bypassing
the OpenGL composition.
Change-Id: Ibdcdcc744c34869d3abbc11aad448a755f87161f
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
tst_collections.cpp
tst_collections.cpp(3138) : warning C4305: 'argument' : truncation from 'size_t' to 'bool'
tst_collections.cpp(3190) : see reference to function template instantiation 'void testContainerTypedefs<QVector<int>>(Container)' being compiled
with[Container=QVector<int>]
(repeated)
tst_qringbuffer.cpp(297) : warning C4267: 'argument' : conversion from 'size_t' to 'int', possible loss of data
tst_qringbuffer.cpp(300) : warning C4309: '=' : truncation of constant value
tst_qringbuffer.cpp(306) : warning C4267: 'argument' : conversion from 'size_t' to 'int', possible loss of data
tst_qrawfont.cpp(947) : warning C4309: 'argument' : truncation of constant value
tst_qsslsocket_onDemandCertificates_member.cpp(217) : warning C4189: 'rootCertLoadingAllowed' : local variable is initialized but not referenced
Change-Id: I6143d4ad121088a0d5bdd6dd2637eb3641a26096
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
When a QML base type is abstract, the documentation for its properties
is supposed to appear on the reference page for each QML type that
inherits the abstract type. And then links to those properties from
within the property documentation must refer to the documentation for
that property on the reference page for the particular inheriting QML
type. These links were dead, but this fix corrects the problem.
Change-Id: Icaf01d67edf44567099f5a6a59fd6348de8df380
Task-number: QTBUG-43200
Reviewed-by: Nico Vertriest <nico.vertriest@digia.com>
Reviewed-by: Tero Kojo <tero.kojo@digia.com>
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Makes it easier to add new tests.
Change-Id: I5c2bca60e125259eac83a03860e60ca85b51db24
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
This is in preparation of adding more tests.
It makes the test run longer, because of the additional book-keeping,
but if something goes wrong, it can pinpoint the circumstances better.
Change-Id: I4be68fcfbffe48e8609b722ea551b1f7c36790a9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We tested button's AXDescription, which is however used only for
non-textual buttons (e.g. buttons with an icon and without a visible
text). On the other hand, button's visible text (which is our case) is
exposed in AXTitle (and not in AXDescription).
Change-Id: Ie89c758cf94b72ade3a440561c5f3df61a4c4612
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Provide real implementations of:
properties(), faceId() and getUnscaledGlyph
Task-number: QTBUG-10094
Change-Id: I5899f247742406de53c68c5cd04fee6fb9b6b7d2
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
bec1854cc0 introduced a regression:
when sorting a tree model, children items would not follow the sorted
parents any more (they wouldn't be remapped correctly), resulting
in crashes.
So, the fix needs more reasoning; let's revert the fix,
but leave the original test around for any subsequent attempt, and
introduce a new test which looks for the right behavior when
sorting trees.
This commit partially reverts bec1854cc0.
Task-number: QTBUG-43827
Change-Id: Ic83ac53aef639f870f6c36a8b4b2992f5b485b13
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Volker Krause <volker.krause@kdab.com>
This patch short cuts a common loop in the gray rasterizer where it
would iterate over cells it considers invalid.
This greatly speeds up clipping paths on large paint devices, but
probably has little benefit for the FreeType origin of our rasterizer.
Task-number: QTBUG-40559
Change-Id: I30845de0b82e53b619853c6c91903793b4267615
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
For some reason these docs were missing, add them.
Change-Id: If17cf429925ee849a0817e0294a7db7f6dace79b
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
nonTouchUI wasn't defined anywhere, this Q_WS_S60 codepath was partially
removed during the Qt4->Qt5 port, but some cruft remained.
It's not worth saving, because:
- QML is now the way to go for touch UI code
- It's ugly, didn't build, won't be missed
and more importantly:
The current layouting code is already very difficult to read, since we have
"normal" mode, QT_SMALL_COLORDIALOG normal and QT_SMALL_COLORDIALOG touch.
(and WINCE ifdefs in the mix)
This will make the ifdef hell a bit better.
Change-Id: I6daa07cbc8da94ccfe1d0c8d3e870c0678c541fc
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
1) everyone forgets to do so (proof: tst_qnetworkaccessmanager_and_qprogressdialog.cpp
forgot too, which led to a valgrind warning, the elapsed timer was never started)
2) setValue(0) makes no sense if the progress dialog goes from 50 to 60,
or any other non-zero minimum value.
Fixed by starting the timer in the constructor (most code doesn't reuse
progress dialogs, so this fixes the most common case), and by also starting
the timer when calling setValue(minimum()) for well-behaved dialogs.
setValue(0) special case kept for compatibility.
Task-number: QTBUG-17427
Task-number: QTBUG-25316
[ChangeLog][Important Behavior Changes][QProgressDialog] The timer for estimating
the duration of the progress dialog is now started in the constructor and in
setValue(minimum()), as well as when calling setValue(0), as previously documented.
Done-with: Marc Mutz <marc.mutz@kdab.com>
Change-Id: Ia8f7fc677438749191b99074fc334eab652ea36f
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The old code fetched QHashData::seed from qt_qhash_seed on every detach.
That is both unnecessary and wrong.
It is uneccessary, because if the detached-from QHashData isn't shared_null,
the seed has already been populated from qt_qhash_seed. It thus suffices to
fetch the seed from qt_qhash_seed only when we detach from shared_null.
It is wrong, because if qt_qhash_seed was changed between the detach from
shared_null and a following detach, d->seed is now different from this->seed,
but detach_helper simply clones the buckets 1:1 from this to d, leaving d
in a corrupt state.
By doing this change, we make QHash robust against on-the-fly changes
to qt_qhash_seed (e.g. for testing, or added security). It also opens up the
option to have API for changing the seed of a given QHash instance after it
has been created (detach, set new seed, rehash).
Change-Id: Ib251fc9a6204b42036e97a2fc66f644b379ab841
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is useless. The C++ language does require callbacks passed to C
functions to also be extern "C". That's what this macro was doing.
But #ifdef'ing for the macro only made the code uglier. Just let the
extern "C" be there for all compilers.
PS: C++ classes can't be extern "C"...
Change-Id: Ic5d393bfd36e48a193fcffff13b9c9b3923443dd
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This version was based on Clang mainline between releases 3.1 and 3.2,
which means it has part of 3.2 features but not all. One of the missing
features is __builtin_bswap16.
Change-Id: Ic5d393bfd36e48a193fcffff13b95664c7f664de
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Output the current active/modal/popup windows when receiving
FocusAboutToChange or FocusIn events.
Task-number: QTBUG-42731
Change-Id: Ia88e9a9b41f7c80fb7a2a048b06da56d989ff18a
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Style sheets that refer to the progress bar (like
"QProgressDialog[maximum='0']{}") may dereference a
null-pointer during the styleHint() call in QProgressDialogPrivate::init()
since the progress bar has not been created yet.
Move the creation of the progress bar closer to the
top of init(), before the styleHint() call.
Change-Id: I31c3c1c346430fc9fe86b0977403dea0c0dc5e90
Task-number: QTBUG-43830
Reviewed-by: Andras Becsi <andras.becsi@theqtcompany.com>
[ChangeLog][QtPrintSupport] Fixed QPrinter::{width,height} return values
when the resolution is changed in the print dialog.
Task-number: QTBUG-43124
Change-Id: Ib805907affed4b1ffb48e6b1ff89f7a79ab3e329
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Until now, QSqlQuery::execBatch did not call resetBindCount, which lead
the next call to QSqlQuery::addBindValue to start at non zero index.
This is problematic in case of a prepared query which is called several
times.
Task-number: QTBUG-43874
Change-Id: I1a0f46e39b74d9538009967fd98a269e05aac6f2
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
The "Fixed CE build of sqlite3" patch is preserved in this change.
Change-Id: I5461571e5e0b60678727c96a9faee93f9624588c
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
The OpenGL windows should have some more obvious
transparent areas in them.
Change-Id: I7d000cd367208f99a79b11c341bf94062613f357
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Remove an useless check and hoist a costly call out of a loop.
Change-Id: Ibd1750026af44462a4f0223a9b2f422ebcc7c0e3
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
With change macro is in line with QT_NO_<feature> style of naming
macros. This way it will also be automatically added to file
mkspecs/qmodule.pri in QT_NO_DEFINES value.
Change-Id: I111d07fd015994290c54e00e8aac2d6dbdb7de9e
Reviewed-by: Ulf Hermann <ulf.hermann@theqtcompany.com>
When using the cross-compiler toolchain for 32 bit on a 64 bit machine,
qmake generated a 64 bit VS project.
This was because qmake didn't know about the amd64_x86 cross-compiler,
and qmake did not use the first MSVC bin directory it found in PATH.
Task-number: QTBUG-43457
Change-Id: I50c6f7bb9afe44a58321c670d680dbcc7cd07223
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The current work-flow for adding app icons to an
iOS app during deployment is not good. You basically
need to specify that you want to use asset catalogs
from within Xcode and add your icons there. The
problem is that qmake will regenerate the Xcode project
the next time it runs, and your changes will then be lost.
This patch will check if the project has a valid asset
catalog assigned to QMAKE_BUNDLE_DATA, and configure
the Xcode project to use it for app icons.
Change-Id: I06621ca46aad91de96cb23ba8ca3b1a3f1226670
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Font hinting depends on the specific pixel size, and ends up very
wrong when the painter is scaled.
Change-Id: I2007ec7e7ad8d52358d76e88e030ea4df7e91455
Task-number: QTBUG-43809
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Rectangles need to be mapped differently depending on what they are
used for. Expose events need to cover the entire geometry, so they must
be rounded up, potentially increasing the size. If we use the same
conversion for window geometries, it is possible to end up with a
feedback loop if the window reacts to the new size.
Task-number: QTBUG-43743
Change-Id: I7881cc77bf2148fed2ae743c4226617a61197434
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
This test requires test data to be available and the
testRetainSizeWhenHidden test assumes that a widget will be
sized based on its sizeHint(), which does not work on
platforms where show() implies showMaximized().
Change-Id: I9bf372d8c0ea94845ae08481ec555fe25dcfebc0
Reviewed-by: BogDan Vatra <bogdan@kde.org>
This test needs to have a test environment available on the regular
file system, so we create this when initializing the test. In
addition we QEXPECT_FAIL one of the tests which seems to expose
a legitimate bug. A bug report has been created for this.
Change-Id: I7c90aea78a067815cb647a51db5d91a652a9fc1c
Reviewed-by: BogDan Vatra <bogdan@kde.org>
On Android, the HOME and TMPDIR environment variables both point
to the application sandbox, whereas the QSideBar test assumed
they were different. We work around this simply by creating
a new directory and using this as the test dir in place of the
home directory.
Change-Id: I67e01926b901ddf237b05aff116d30b6c7885535
Reviewed-by: BogDan Vatra <bogdan@kde.org>