Verifies that we get the messages we want, and makes it easier to see
relevant debug output.
Pick-to: 6.2
Change-Id: Ide92959b120f325badbf200236cdc85f72226e1e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
- process environment/DNS are OFF for INTEGRITY
Task-number: QTBUG-96176
Pick-to: 6.2
Change-Id: I189a97f88c96a428586c31a66b8d250e04482900
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QVLA itself is non-relocatable due to self references. (ptr pointing
to array[Prealloc] as long as capacity < Prealloc)
Seems we shot ourselves in the foot in multiple places with this.
Pick-to: 6.2 6.2.0
Fixes: QTBUG-96619
Change-Id: I57a2ce539b671326cd352dbe57a1f3d4c46a6456
Reviewed-by: Tobias Koenig <tobias.koenig@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The QDoubleValidator::setRange() used to have 3 parameters, with
the third one (the number of decimals) having a default value of 0.
Such default value does not make much sense for a *double* validator.
Also, since a default value was used, omitting the decimals was
silently overwriting the previous decimals value, discarding the
value that could be previously explicitly specified by user.
[ChangeLog][QtCore][QDoubleValidator][Important Behavior Changes] The
QDoubleValidator::setRange() method now has two overloads.
The first overload takes 3 parameters, but does not support a
default value for decimals.
The second overload takes only two parameters, not changing the
number of decimals at all.
Hence, the number of decimals will only be changed if the user
explicitly specifies it.
To maintain the old behavior of setRange(), pass 0 as the 3rd
argument explicitly.
Note that it is a source-incompatible change. But it should be fine,
because using QDoubleValidator with 0 digits after decimal point does
not make much sense and so, hopefully, is not that common.
At the same time, change the default-constructed QDoubleValidator
to use -1 for decimals, which allows arbitrarily many digits in
the fractional part. The value was previously 1000, which allowed
more than anyone would reasonably use, so this should make no
practical difference.
Some more unit tests to cover the behavior of the setRange()
overloads are also added.
As a dirve-by: remove unnecessary QValidator::State to int conversions
in the unit tests. QCOMPARE is capable of comparing these enums and
provides a better output in case of failure for enums.
Task-number: QTBUG-90719
Change-Id: I523d6086231912e4c07555a89cacd45854136978
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
It is no longer handled separately from Android.
This effectively reverts commit 6d50f746fe
Change-Id: Ic2d75b8c5a09895810913311ab2fe3355d4d2983
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
...when starting a render/compute pass.
This matches most other backends in fact, the Vulkan backend has
just certain historical differences, and is complicated due to the
fact that it has the option of using secondary command buffers for
passes that specify ExternalContents (to support the case of wanting
to issue direct Vulkan commands in a code block surrounded by calls
to beginExternal and endExternal).
Not resetting state such as the currently bound index buffer when
starting a pass quickly blows up when two consecutive render passes
use different settings, one targeting the primary while the other
the secondary command buffer. Instead of further complicating the
logic, just reset the relevant state in every begin(Compute)Pass.
Comes with an autotest that is crafted so that it manages to
downright crash when run with Vulkan without the fix to the backend.
Fixes: QTBUG-89765
Pick-to: 6.2
Change-Id: I8dc47bd179c17d45a0556ec31200dc90c4b67ca5
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
The provided implementation tries to fix positions for the group
separator.
In case of scientific notation it can also converts the value to
normalized form.
It uses QLocale::FloatingPointShortest internally to convert the
double value back to string, so the number of decimals may change
after calling this method.
Change-Id: I963bc5f97b653e2bb912f4b95b09a4d1ee201e7f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Follow what has been done for QRhiShaderResourceBindings. Have a way
to retrieve an opaque blob (that just happens to be a list of integers)
so that a simple == comparison can be used to determine compatibility
even when the objects from which the blob was retrieved are no longer
alive.
The contract is the following:
bool a = rp1->isCompatible(rp2);
bool b = rp1->serializedFormat() == rp2->serializedFormat();
assert(a == b);
Pick-to: 6.2
Change-Id: I45e7d05eeb6dfa2b2de474da0a0644912aaf174a
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
a332f3fabc disabled resolving all fonts
on the system for every font lookup, which was a significant startup
time improvement. But it also caused a regression: When a font has
an alias which shares the name of a proper font, then this would
not be resolved correctly.
This is fairly typical on Windows/GDI due to backwards-compatibility.
Instead of being collected under a shared typographical family, fonts
are disambiguated by adding the style name to the family name. The
proper typographical name is still available, but this is not
enumerated by the system.
So "Segoe UI" for instance, will be available as "Segoe UI",
"Segoe UI Light", "Segoe UI Bold" etc.
When we populate family aliases, we register that "Segoe UI Light"
is actually "Segoe UI" with Light weight, and prior to
a332f3fabc this would be done implicitly.
But after the optimization, we would only populate family aliases once
we stumbled over a font request for a non-existent font. For "Segoe UI",
we would simply return the regular weight font as the best imperfect
match.
The fix is to populate font family aliases not only when the family is
non-existent, but when the match is imperfect, e.g. if we are asking
for a Light weight font and only finding a regular one. User code can
still avoid this somewhat expensive operation by using the full
family names on Windows.
This also requires a fix to a test. When removeApplicationFont() is
called, we invalidate the font database, so it will be reset to a state
that does not contain the family aliases. Therefore we cannot guarantee
that it is identical to what it was before the test started, since this
depends on what has happened previously in the application.
[ChangeLog][QtGui][Text] Fixed an issue where some font styles and weights
would not be selectable. This was especially noticeable on Windows.
Pick-to: 5.15 6.1 6.2
Fixes: QTBUG-94835
Change-Id: I892855edd1c8e3d3734aace396f6000d897d2ec4
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Export configuration() and setConfiguration() from the offscreen
platform plugin using QPlatformNativeInterface. tst_qighdpi can
then resolve and make use of them since it always uses the offscreen
platform plugin.
Add screenDpiChange() auto test.
Change-Id: I459b4df5d94ec4991234a346e3a94618cb3485e9
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Noticed the missing tests while implementing fixup() for
QDoubleValidator.
Change-Id: Ic0e053a6385e311e4a491c8bff8ec7fbb83c3944
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Be idiomatic and return the output iterator one past the last element.
Otherwise passing in a plain pointer (as exercised by the autotest now)
fails to function because we write over the same 4 elements again and
again for each binding.
Pick-to: 6.2
Change-Id: If74463fa5140ffa2b1d5be97b71868848ad46614
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
...by the Qt Quick renderer, for example.
A typical Qt Quick material binding set serializes to 8 uints. This
would not demand a container like QVector. However, being implicitly
shared is essential here due to the intended usage (query the
serialized blob, put it into a cache key, hash it, compare it, all
without any copying and new allocs; we can afford an extra alloc
upon each srb construction, but don't want more afterwards in the
rendering engines)
Also make it clear in the pipeline docs that the optimization Qt Quick
is (soon going to be) doing is legal. (the srb ref in the pipeline can
be dead and dangling as long as every call to setShaderResources()
specifies a layout-compatible alternative)
Pick-to: 6.2
Change-Id: I97efbea1fa3516b10c9832adbab0a21b7bc0845d
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Verify that closing a QWindow using either the close()
API or a close event works as expected, and that the window
can be re-created. Also test QWindows with child windows.
Task-number: QTBUG-46701
Change-Id: I4c12452ff58e1233536c2d6932e72cf924d8ed74
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
We can't really compare two NaN's. Should use qIsNaN() for that.
Pick-to: 6.2
Change-Id: Ia514cabe65cfcdeafb39cab91ecdb66f8fae725c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When using NoFontMerging, no fallbacks should be resolved. If the
font does not support a specific character in the text, we should
display a box instead of merging it with another font.
But in practice, Qt would still apply the fallback mechanism for
one specific case: If the font itself does not support the script
of the text, we would get no match and do a search for a fallback
instead. Since NoFontMerging is set, we would then force this
as preresolved for *all* scripts in the QFont's private data
(logically, the match should only have a single response for
NoFontMerging).
The end result was that if you set the font family before updating
the text, you would get broken rendering. This can happen e.g. in
Qt Quick, where you could update the font family of a text label
while it contains characters which are not supported by the new
font. Qt would then pick a fallback instead. When you subsequently
update the text, the fallback would already be preresolved for
whatever script this is. If it does not support the updated text,
we would then see boxes, even if the requested font actually would
have supported it.
The fix is simply to do an additional pass if NoFontMerging is set
and we were not able to match with the specified script. Since
the same family might be available in different foundries, with
different writing system support, we still want to do a pass first
to see if we can match the exact script of the text.
Note that QRawFont::fromFont() exploited the bug by using
NoFontMerging for getting the fallback font for a specific
writing system. To keep this working without having to rewrite
fromFont() and risk introducing regressions, we add an argument
to make the findFont() function behave as before. It isn't
super-pretty, but since it is private API it is hopefully fine.
[ChangeLog][QtGui][Text] Fixed an issue with NoFontMerging and
changing font families dynamically, where boxes would be seen in
place of the correct text.
Pick-to: 5.15 6.1 6.2
Done-with: Andy Shaw
Fixes: QTBUG-81770
Change-Id: Ide9a36d7528a1040172c5864fa99e7a82eac4e83
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Remove SRCDIR defines from tests that don't use them. There is a
standard define called QT_TESTCASE_SOURCEDIR that is available to all
tests and serves the same purpose.
Pick-to: 6.2
Change-Id: I2aa237739c011495e31641cca525dc0eeef3c870
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Replace custom SRCDIR define with QT_TESTCASE_SOURCEDIR. The latter is
automatically available to all tests to use and serves the same purpose
but is not terminated by a slash.
Change-Id: I62896d0fd84ac63ac1b74a459ec1646c6bde0a46
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Previous fix hit too widely so some valid horizontal and vertical
lines were affected; the root problem being that such lines have an
empty control point rect (width or height is 0). Fix by caculating in
the pen width.
Pick-to: 6.2 6.1 5.15
Change-Id: I7a436e873f6d485028f6759d0e2c6456f07eebdc
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The QtTest best practices documentations recommends using output
mechanisms such as qDebug() and qWarning() for diagnostic messages,
and this is also what most of our own tests do.
The QWARN() macro and corresponding internal QTest::qWarn() function
was added when QtTest was first implemented, but was likely meant as
an internal implementation detail, like its cousin QTestLog::info(),
which does not have any corresponding macro.
This theory is backed by our own QtTest self-test (tst_silent)
describing the output from QWARN() as "an internal testlib warning".
The only difference between QWARN() and qWarning(), besides the much
richer feature set of the latter, is that qWarning() will not pass
on file and line number information in release mode, but QWARN() will.
This is an acceptable loss of functionality, considering that the user
can override this behavior by defining QT_MESSAGELOGCONTEXT.
[ChangeLog][QtTest] QWARN() has been deprecated in favor of qWarning()
Pick-to: 6.2
Change-Id: I5a2431ce48c47392244560dd520953b9fc735c85
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
One is a bad application or library in this case, but nonetheless
we should handle this more gracefully then just crashing due to
the QRhi already having been destroyed. Mainly because in Qt 5 one
could get away with the same: releasing OpenGL objects underneath,
for example, a QSGPlainTexture with no (or wrong) GL context did
not generate any user visible fatal errors. So we should not crash
in Qt 6 either with these code bases.
In debug builds or when QT_RHI_LEAK_CHECK is set, one will get the
unreleased resources warning printed in Qt 6, which is a step
forward compared to Qt 5. So there is still some indication that
something is badly designed, even if the application survives.
Task-number: QTBUG-95394
Pick-to: 6.2
Change-Id: I944f4f425ff126e7363a82aff926b280ccf1dfc3
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
layoutAboutToBeChanged must be called before
persistentIndexList as the user might create persistent indexes
as a response to the signal
Fixes: QTBUG-93466
Pick-to: 6.2 5.15
Change-Id: I73c24501f536ef9b6092c3374821497f0a8f0de4
Reviewed-by: David Faure <david.faure@kdab.com>
When saving to a QIODevice, QImage and QImageWriter will automatically
deduct the file format from the filename if it determines that the
device is a QFile. That did not work for a QSaveFile device. Fix by
using the common ancestor, QFileDevice, in the implementation.
Fixes: QTBUG-89022
Pick-to: 6.2
Change-Id: Ie01d80df4f29ca0d4ff30bf7e1b77605293c070e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
... instead of raw pointers or QSharedPointer.
Raw pointers are, of course, a no-no in modern code. In particular,
when the result is then held in shared_ptr or QSharedPointer,
make_shared or QSharedPointer::create() should be used to reduce
number of memory allocations.
Since this is private API, we're free to use std::shared_ptr, which
does only half the atomic operations on copies, compared to
QSharedPointer, so is more efficient.
For either make_shared or QSharedPointer::create(), we need to work
around the private ctor, which we do by inheriting a member-function
local class from QColorTrcLut and make_shared'ing that. As a
member-function-local class, it has access to the otherwise private
parts of QColorTrcLut, including its default constructor. As a public
subclass, shared_ptr has no problem performing the derived-to-base
pointer adjustment in the return statement. This way, we can use
make_shared even though our target's class' ctor is private.
Change-Id: Icb11249b54cd5e544e692f6a0bf1f9dda1710454
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
... by making the test class a friend of the CUT, as we do elsewhere
for the same reason.
This allows to remove the duplicated enum and struct in favor of using
The Real Thing™, which means the test can no longer go out of sync
with the CUT anymore.
Change-Id: I87dc8bb4a5476ae4fc99e006c4690e96d2f530d2
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Fixes compiler warnings:
warning: implicit capture of ‘this’ via ‘[=]’ is deprecated in C++20 [-Wdeprecated]
Change-Id: Ia7cf50f491e92f39162c69afb2a8320afedba056
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Makes it able to catch the last bug of saturating color values above a
certain value.
Change-Id: Ib2a3918623a1defe2981efe61cf8118e019e9d4b
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
We need those events to trigger palette color group changes in QQuickItem
without having to connect every item to yet another QWindow signal.
Task-number: QTBUG-93752
Pick-to: 6.2
Change-Id: I8534808cdaab828e5876f8fda31567aeb1b4272a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Handy when one has the data buffer to be read in a QBAV.
This also fixes an issue and compiler warning about passing a
qsizetype data length value as an int, and makes it possible to pass
a qsizetype-size length without going through QByteArray.
Makes the QByteArray overload redundant.
Change-Id: Iba8825cf0fd8003fb2eac5b1d30a61ec91b85ceb
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
When rotating M_PI_2 based on x-axis, quaternion to euler conversion
makes NaN for the x-rotation value. This patch fixes this corner case.
Fixes: QTBUG-93600
Pick-to: 6.1 6.0 5.15
Change-Id: Ice321a80ad90dba9cf3ee3a14ec7d3d047c21bd3
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Supported on OpenGL (and ES) 3.0+ and everywhere else.
Can also be a render target, targeting a single slice at a time.
Can be mipmapped, cannot be multisample.
Reading back a given slice from a 3D texture is left as a future
exercise, for now it is documented to be not supported.
Upload is going to be limited to one slice in one upload entry,
just like we specify one face or one miplevel for cubemap and
mipmapped textures.
This also involves some welcome hardening of how texture subresources
are described internally: as we no longer can count on a layer index
between 0..5 (as is the case with cubemaps), simply arrays with
MAX_LAYER==6 are no longer sufficient. Switch to sufficiently dynamic
data structures where applicable.
On Vulkan rendering to a slice needs Vulkan 1.1 (and 1.1 enabled on the
VkInstance).
Task-number: QTBUG-89703
Change-Id: Ide6c20124ec9201d94ffc339dd479cd1ece777b0
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Add NEON for RGB32 and RGBA64 writeback, and SSE2 for
RGBA64 writeback.
Change-Id: Id9ee803267a78f5bdff5beaa719e7a59c1dbb9fb
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Useful for some HDR representations and HDR rendering.
Change-Id: If6e8a661faa3d2afdf17b6ed4d8ff5c5b2aeb30e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The existing conversions weren't handling gamma correctly and used
an ad-hoc definition of gray instead of based on true luminance.
[ChangeLog][QtGui] RGB conversions to grayscale formats are now
gamma-corrected and produce color-space luminance values
Change-Id: I88ab870c8f5e502ddb053e6a14a75102239a26f2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
In QFileSystemModel, in some cases the hostname in a UNC path is
converted to lower case and stored in the root node's visibleChildren.
When QFileSystemModel sets the UNC path as the root path, it tries to
get the row number for the host, but it didn't convert the hostname to
lower case before getting the row number, which resulted in the host
not found in the root node's visible children. As a result, it returns
-1, an invalid row number. Change the behavior to find the node for the
host using the host name case-insensitive and then get the row number.
Fixes: QTBUG-71701
Pick-to: 5.15 6.0 6.1
Change-Id: Ib95c7b6d2bc22fd82f2789b7004b6fc82dfcb13b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Normally we only allow creating wrappers for texture objects. These
can then be used with a QRhiTextureRenderTarget to allow rendering into
an externally created texture.
With OpenGL (ES), there are additional, special cases, especially on
embedded. Consider EGLImages for example. An EGLImageKHR can be bound to
a renderbuffer object (glEGLImageTargetRenderbufferStorageOES), which
can then be associated with a framebuffer object to allow rendering into
the external buffer represented by the EGLImage. To implement the same
via QRhi one needs a way to create a wrapping QRhiRenderBuffer for the
native OpenGL renderbuffer object.
Here we add a createFrom() to QRhiRenderBuffer, while providing a dummy,
default implementation. The only real implementation is in the OpenGL
backend, which simply takes a renderbuffer id, without taking ownership.
Task-number: QTBUG-92116
Change-Id: I4e68e665fb35a7d7803b7780db901c8bed5740e2
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
takeItem and takeChild do not signal the change correctly to the
external world, this change fixes the problem
Fixes: QTBUG-89145
Pick-to: 6.1 5.15
Change-Id: Ib4844ace53007068a2cd62eba64df99e6e45fdc0
Reviewed-by: David Faure <david.faure@kdab.com>
from qt/qtx11extras 0e67fb41cfc4b4bfbaa7dc75f8ddebdf5a08e836.
The plan is to expose these as native interfaces, so this is a first
step.
Task-number: QTBUG-83251
Change-Id: Iecba8db9a4f616a08a3750ddaae08cc30ec66f89
Reviewed-by: Liang Qi <liang.qi@qt.io>
Most nested block elements are merged together, so while we shouldn't
do real inheritance we need to do it when block elements are combined.
Pick-to: 6.1
Fixes: QTBUG-91236
Change-Id: I9e37b15f705db92c79a620d0d772f25d0ee72b8d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
When we are having nested lists then we need to ensure that the HTML is
outputted correctly so that the closing list and item tags are placed
in the right order.
[ChangeLog][QtGui][QTextDocument] The output of toHtml() now handles
nested lists correctly.
Fixes: QTBUG-88374
Pick-to: 6.1 5.15
Change-Id: I88afba0f897aeef78d4835a3124097fe6fd4d55e
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
This unit test is related to the parent commit.
Html export used to omit the text-decoration for the default font,
this unit test ensures that this property is added to the exported
html.
Fixes: QTBUG-91171
Change-Id: Ib68bec27f9963cdcac5c553b2c07557717b1c22e
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
It used to be ignored because we couldn't disable it, but that works
fine now. So re-enable it.
Fixes: QTBUG-91171
Change-Id: I4cf966211bb200b73326e90fc7e4c4d3d4090511
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Currently, we test at 1x, 2x, and mixed typical desktop
DPI values. Add android DPI values, with scale factors
in the 2.5 - 3.75 range.
This test currently uses 96 as the base DPI (and so
does the Android platform plugin), so we normalize
the values to use that base DPI.
Change-Id: I25b66f5e16d37c01758d5623b805e4141247a74a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Test the name=factor format and various incorrect spec
strings. We expect that the screen DPI is used if the
scale factor specification is incorrect.
Change-Id: Ia990e70cf71e370dd2bb4b1047a101dfe9e59cb0
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This reverts commit 40330b8f0a.
It was a bad idea to use QFlatMap here, because it is a sorted map, but
we need to keep the passive grabbers in the same order as the grabs happened.
So need to go back to an earlier version of the patch that uses two parallel QLists.
Pick-to: 6.1
Change-Id: I9e6013c2565986fe1eb9fd754f8259766f83bee5
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
QHighDpiScaling has two init/update functions:
- initHighDpiScaling(): called once during QGuiApplication construction
- updateHighDpiScaling(): called whenever (relevant) screen configuration changes
Currently the calls to updateHighDpiScaling() are made from
multiple places including platform code. Simplify by calling
it from two locations:
- QWindowSystemInterface::handleScreenAdded()
- QGuiApplicationPrivate::processScreenLogicalDotsPerInchChange()
Replace comment about early calls to qt_defaultDpi with a
test which calls qt_defaultDpiX/Y with no screens attached.
(Looking at the qt_defaultDpiX() implementation, it is unlikely
that there will be a problem as long as updateHighDpiScaling()
is called before QGuiApplication::primaryScreen() starts returning
a non-null value.)
Change-Id: I447db42894617495843a5cb531a1322b000fed62
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
In Qt Quick we now need to keep track of which QQDeliveryAgent is
responsible when a point is grabbed, either passively or exclusively.
When we re-deliver to that grabber, we need to do it via the same agent,
so that the same scene transform is used, and the grabber will see the
event in the correct coordinate system. It's easier to track this
mapping here instead of in a separate map in Qt Quick.
Pick-to: 6.1
Task-number: QTBUG-92944
Change-Id: I69f769c694d0da24885cdf4087e5032022bff629
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Those tests don't fail anymore and show in CI as BPASS, so we
can safely, hopefully, unblock them
Task-number: QTBUG-87429
Fixes: QTBUG-68974
Fixes: QTBUG-69166
Fixes: QTBUG-87403
Fixes: QTBUG-87411
Fixes: QTBUG-69083
Fixes: QTBUG-69084
Fixes: QTBUG-87426
Pick-to: 6.1
Change-Id: I831b955116c0f465319b9c5fc726dd98804d1c00
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Add rounding one place, and skip addFile for now since
the assumption about rounding dpr up no longer applies.
Pick-to: 6.1
Change-Id: I0a84dfabb218acf42cb3816ba50ef899c8762523
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
QVectorND, QQuaternion, and QColor all operate on floats rather than
qreal or double, so explicit use float literals in the tests.
Pick-to: 6.1
Change-Id: If12cc12ddd9cd8219f3d78bf24e1400921e26c2b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
376e3bd8ec added the new class for Qt 6.1,
but during header review we concluded that using a class introduces
complexity wrt instance ownership and API design that can be avoided by
using a std::function instead.
The functionality is tied to QTextDocument, so the type definition and
the default provider API is added there.
Since std::function is not trivially copyable, the atomicity of the
previous implementation is not maintained, and concurrent modifications
of and access to the global default provider from multiple threads is
not allowed. The relevant use case can be supported by implementing a
resource provider that is thread safe.
Task-number: QTBUG-90211
Fixes: QTBUG-92208
Pick-to: 6.1
Change-Id: I39215c5e51c7bd27f1dd29e1d9d908aecf754fb7
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
While the class name is now a bit more than a mouthful, it's purpose
is very narrowly tied to QTextDocument, so don't use a very generic
name for it. That resources are provided based on a URL is to some
degree an implementation detail, and URLs are resource locators so
we don't need that in the class name.
Address code review comment for 6.1. Add documentation and links to
existing APIs with a similar purpose.
Task-number: QTBUG-90211
Task-number: QTBUG-92208
Pick-to: 6.1
Change-Id: I4f09057cc2f53a5595513c1c9422e6ccaad6ca13
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
fillRule() contained a major blunder: instead of checking if the
d-pointer was allocated, and return a default value if it wasn't,
it checked whether the path contained any points. This means that
QPainterPath p;
p.setFillRule(x);
Q_ASSERT(p.fillRule() == x);
was failing.
As a drive-by to test this change, fix another mistake in clear():
clear is documented to clear the elements in a path, but instead
it also changed the fill rule.
This commit partially reverses 697910e5fb.
Change-Id: Ieb8145694b672439c3380d9ccb87d1206a2dd115
Pick-to: 5.12 5.15 6.0 6.1
Done-with: Milian Wolff
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
It was treated differently depending on format, made it consistently
behave the same for all formats (following the behavior of the primary
formats).
Pick-to: 6.1 6.0 5.15
Change-Id: Ie24e19957d076fdf3ebd333074e26ede187489eb
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Test that setting QT_USE_PHYSICAL_DPI uses physical
DPI instead of logical DPI.
Change-Id: I7f89cf1af5e013454cc3d8ec3559f2719514fea3
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Add auto-tests for QT_SCALE_FACTOR and QT_SCREEN_SCALE_FACTORS
Change-Id: I57bffa266be910f2ba26cb1a870e09ae202fcae0
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The tst_qwindow test failed with a warning that programmatically
moving the mouse cursor is not possible with Wayland.
Task-number: QTBUG-91418
Change-Id: I02ceb2af43fbc83a4e6ae09718315f5f79ff8285
Reviewed-by: Liang Qi <liang.qi@qt.io>
There was a race condition in the test, since the window
might be exposed before the event to activate the
application has been received. And the short cut is not
triggered before the application is active, which
means it could just be discarded and the window would
never be closed.
This happened consistently when testing on Wayland.
Task-number: QTBUG-91418
Change-Id: I40cb143985175f5f2b5405e9502a48475c93074a
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
This test depends on XCB, but is only protected by a build-time
flag, so it will be executed as long as XCB is available at
build-time. Do as with the offscreen backend and just skip it
when a different platform plugin is in use.
Task-number: QTBUG-91418
Change-Id: Ida076dc81d0740af2cec164bd40ca10d16345f05
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Since Qt 5.5, brush textures are stored as QImages. If the texture has
been set as a QPixmap, the conversion to QImage may change its pixel
format, depending on the native system format. That is acceptable.
Fixes: QTBUG-69193
Task-number: QTBUG-91418
Change-Id: Ic4dbeaa552b1f2183774a011e38414855a9dc4b1
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Following patterns from the other backends is insufficient with OpenGL
because we do not use real uniform buffers. There is currently a
possibility that a shader program will be bound without following it
with setting uniforms. Correct this by having a second level of tracking
of the associated srb object in the pipelines.
Pick-to: 6.0 6.1
Fixes: QTBUG-91630
Change-Id: I74a012daade826dd22c436bde06381c1233bad11
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
This function returns the size in device independent
pixels, and should be used when calculating user
interface sizes.
Change-Id: I528123f962595a3da42438ca560289a29aca4917
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
A way to read the description of the profile from ICC, or set one
yourself.
Change-Id: I68622e30ee209cac99c41f3df934712c3548c0de
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
When a foreign event loop that does not enter an alertable wait state
is running (which is also the case when a native dialog window is
modal), pipe handlers would freeze temporarily due to their APC
callbacks not being invoked.
We address this problem by moving the I/O callbacks to the Windows
thread pool, and only posting completion events to the main loop
from there. That makes the actual I/O completely independent from
any main loop, while the signal delivery works also with foreign
loops (because Qt event delivery uses Windows messages, which foreign
loops typically handle correctly).
As a nice side effect, performance (and in particular scalability)
is improved.
Several other approaches have been tried:
1) Using QWinEventNotifier was about a quarter slower and scaled much
worse. Additionally, it also required a rather egregious hack to
handle the (pathological) case of a single thread talking to both
ends of a QLocalSocket synchronously.
2) Queuing APCs from the thread pool to the main thread and also
posting wake-up events to its event loop, and handling I/O on the
main thread; this performed roughly like this solution, but scaled
half as well, and the separate wake-up path was still deemed hacky.
3) Only posting wake-up events to the main thread from the thread pool,
and still handling I/O on the main thread; this still performed
comparably to 2), and the pathological case was not handled at all.
4) Using this approach for reads and that of 3) for writes was slightly
faster with big amounts of data, but scaled slightly worse, and the
diverging implementations were deemed not desirable.
Fixes: QTBUG-64443
Change-Id: I66443c3021d6ba98639a214c3e768be97d2cf14b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Avoid painting errors with dpr < 1, also for the PassThrough
mode.
This limits the minimum high-dpi scale factor to 1,
for the code path which determines the scale factor
based on screen DPI.
Pick-to: 6.1
Task-number: QTBUG-89948
Change-Id: I14b3f130f0ae141d5f05c87437f926a9f76d1dec
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
After QPoint(F), it's now the time of QSize(F) and QVectorND,
which can be unambiguously decomposed.
[ChangeLog][QtCore][QSize] QSize is now usable in a structured
binding declaration.
[ChangeLog][QtCore][QSizeF] QSizeF is now usable in a structured
binding declaration.
[ChangeLog][QtGui][QVector2D] QVector2D is now usable in a
structured binding declaration.
[ChangeLog][QtGui][QVector3D] QVector3D is now usable in a
structured binding declaration.
[ChangeLog][QtGui][QVector4D] QVector4D is now usable in a
structured binding declaration.
Change-Id: I67bb152f4210f2be27607179cd2ec522174cc483
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Only RGB444 and RGB666 were treated slighlty different from the rest,
but the test had a few additional mistakes.
Pick-to: 6.1 6.0 5.15
Change-Id: I4728b4036affedfffce8bca5c1e7be3869344fbe
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
When changing transferfunction the look-up-tables needs to be
regenerated.
Pick-to: 6.1 6.0 5.15
Change-Id: I83ca5fe570f85d478a374f52c0a82db84e70c3b8
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
The emulation detection has been usable only on qtbase tests, move it to
QTest so that it can be used in other modules as well.
Pick-to: 6.1
Change-Id: I4b2321b7856414d7b1cfd5e6b1405a633c6bb878
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
A few formats were not treating the input QColor correctly. Fixed and
added more exhaustive test.
Pick-to: 6.1 6.0 5.15
Change-Id: I872aeeb45e518f9a34b4ac35642264821f9927f2
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Calculate the effective width of the hyphen better, and compare with
ceiled sizes.
Pick-to: 6.1 6.0
Fixes: QTBUG-90698
Change-Id: I7ed2eb44c54240ecb2f8a38e5acf1f32608b2bfb
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Different font was used when running on QEMU ARMv7 and the second page
was never reached.
Pick-to: 6.1
Task-number: QTQAINFRA-4127
Change-Id: Ic85b76661cf3642b69e6e1b21e8062d7c36231e3
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
As described in 3279c8e7d7, we can't
depend on the widths of decoration to always be the same for
drawText() and equivalent drawStaticText/drawGlyphRun.
This is typically visible as an off-by-one when using the default
fonts on OpenSUSE.
Since this test was actually made to test positions of RTL glyphs,
we can just disable the decoration and simplify the text.
Fixes: QTBUG-89086
Change-Id: I139fe3e1c5e98d8b1d7e0e7c19645fd4717d1d95
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This was added by 9ff76c27b9 on
the basis that it signifies a shaping error and would later assert
or crash.
But the line is easily reachable by user code. If Harfbuzz returns
0 glyphs, it just means it is unable to shape the string, for instance
if the input string only contains default ignorables (like a ZWJ)
and does not have any appropriate glyph to use for replacement.
Qt expects there to always be at least one glyph in the output
(num_glyphs == 0 is used to indicate shaping is not yet done), so
to avoid asserts later on, we simply populate the output with a
single 0 token, which is a required entry in the font that is
reserved for representing unrepresentable characters.
This also adds a test and therefore a zero-width joiner to the test
font to reproduce the issue.
[ChangeLog][QtGui][Text] Fixed a possible crash with certain fonts
when shaping strings consisting only of control characters.
Fixes: QTBUG-89155
Pick-to: 5.15
Pick-to: 6.0
Change-Id: Ia0dd6a04844c9be90dcab6c464bebe339a3dab11
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
With the updated QEMU and toolchain, these tests now pass.
Change-Id: Icb74562a0e6422cd4564f63db991aa431e0e3119
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Make use of the device pixel ratio in the QIcon paint method so the @nx
hi-dpi pixmaps are selected when appropriate when painting to a
QPainter.
Pick-to: 6.0
Fixes: QTBUG-90042
Change-Id: I53995a2285ef879e3c4fddb9f8da702e256a260f
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Initialize the offscreen platform plugin with no screens,
create QGuiApplication object.
Not much of the high-dpi related Qt API can be used
in this configuration, but at least Qt should not crash
on startup.
Task-number: QTBUG-71034
Change-Id: I6620843c3bd8b692c5c2419b1ba290e16175ba5b
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Add QRhi APIs to retrieve and reload the contents of the "pipeline
cache".
The only API where there is a true pipeline cache is object is Vulkan
(VkPipelineCache). For OpenGL, the other backend where we support this,
it is simulated with program binaries. The Qt 5 style OpenGL program
binary disk cache continues to work like before, but one has now the
option to do things in a more modern, graphics API agnostic way, that
leads to generating a single blob instead of a large set of files in
some system location, allowing easier "pre-baking" of the cache content.
It is expected that Qt Quick exposes the two new functions in form
if QSG_RHI_ environment variables, thus allowing easy testing and
cache file generation.
As an example for the performance improvements this can give, consider
Vulkan, where we do not have any existing persistent caching mechanism
in place:
Running BenchmarkDemoQt6.exe --scene flythrough --mode demo creates 18
QRhiGraphicsPipeline objects from Qt Quick and Qt Quick 3D.
The total time spent in QRhiGraphicsPipeline::create() during application
startup for these 18 pipelines is 35-40 ms on a given Windows (NVIDIA)
system.
When exporting the pipeline cache contents to a file, and then, in a
subsequent run, reloading the cache contents, this is reduced to 5-7 ms
on the same system, meaning we get a 6-7x improvement.
The generated data is always specific to a given Qt version, RHI
backend, graphics device, and driver version. Much of the implementation
consists of adding and verifying the appropriate header to the blobs
retrieved from the driver, to allow gracefully ignoring data that was
generated with a device or driver that differs from the one used at
run time. This should provide robustness, even if the Vulkan or OpenGL
implementation is for some reason not prepared to identity and reject
incompatible cache/program blobs.
Fixes: QTBUG-90398
Change-Id: I67b197f393562434f372c7b7377f638abab85cb3
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
...when the platform does not support Vulkan. The version is left
at the default 0 then, so checking for >= 1.0 is wrong.
This allows the test to pass with the offscreen platform plugin.
Change-Id: I5afba8f1e703e4fa0ff41da91d18f5fabfb54868
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
This also needs improvements to qvkgen. What we get with this patch
are the Vulkan 1.1 and 1.2 core API's additional 11 instance-level
and 30 device-level commands present in QVulkanFunctions and
QVulkanDeviceFunctions.
All of these are attempted to be resolved upon construction. When the
implementation does not return a valid function pointer for some of them
(e.g. because it is a Vulkan 1.0 instance or physical device), calling
the corresponding wrapper functions will lead to unspecified behavior.
This is in line with how QOpenGLExtraFunctions works. The simple
autotest added to exercise some Vulkan 1.1 APIs demonstrates this in
action.
The member functions in the generated qvulkan(device)functions header
and source files are ifdefed by VK_VERSION_1_{0,1,2}. This is essential
because otherwise a Qt build made on a system with Vulkan 1.2
headers would cause compilation breaks in application build environments
with Vulkan 1.0/1.1 headers when including qvulkanfunctions.h (due to
missing the 1.1/1.2 types and constants, some of which are used in the
function prototypes). In practice this should be alright - the only
caveat to keep in mind is that the Qt builds meant to be distributed
to a wide variety of systems need to be made with a sufficiently new
version of the Vulkan headers installed, just to ensure that the
1.1 and 1.2 wrapper functions are compiled into the Qt libraries.
Task-number: QTBUG-90219
Change-Id: I48360a8a2e915d2709fe82993f65e99b2ccd5d53
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Instead, have a static function in QRhiVulkanInitParams then Qt Quick
and anyone else who creates a QVulkanInstance that is then used in
combination with QRhi can query.
Change-Id: I046e0d84541fc00f5487a7527c97be262221527f
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
...as described in the Vulkan >= 1.1 spec. One can now call
supportedApiVersion() (before create(), similarly to the other
supported* functions) to determine the available Vulkan
(instance-level) version.
Fixes: QTBUG-90333
Change-Id: Ibe8482402b7f07e4abc48c88252ff0365e4e2faa
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
QGuiApplicationPrivate::processMouseEvent() sends a
QWindowSystemInterfacePrivate::TouchEvent if the mouse event is not
accepted and AA_SynthesizeTouchForUnhandledMouseEvents is enabled.
A QPA TouchEvent always contains native touch points, which is why
it calls QWindowSystemInterfacePrivate::fromNativeTouchPoints to
translate the QMouseEvent's device-independent position back to the
raw position that it would have had if it came from a real touchscreen.
Therefore we must give that function touchpoints that are actually in
native coordinates.
It may be that some of this transformation could be avoided entirely,
but here we prove that the existing way works correctly, by adding
coordinate checking to the tst_QWindow::mouseToTouchTranslation() test.
Pick-to: 6.0
Task-number: QTBUG-86165
Change-Id: I4c9ca2b11e9eb76d79712c187db3eb9865da581a
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Android and Wasm do not build the offscreen platform
plugin (see src/plugins/platforms/CMakeLists.txt).
Skip building the tst_qhighdpi test as well in this
case. Remove the BLACKLIST entry.
Task-number: QTBUG-88505
Change-Id: I172198c8c24759b14f73ad07260c449fc6ab893f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
From QRhi's perspective this consists of two things:
- A shader with samplerExternalOES in it cannot go through the standard
pipeline. Rather, a QShader with suitable GLSL code in it has to be
constructed manually. As this is something useful as an autotest
anyway, add a test case to the qshader autotest that demonstrates
this.
- When it comes to correctly calling glBindTexture, add a QRhiTexture
flag. The expectation is that an OpenGL-only client sets this in
combination with QRhiTexture::createFrom(), thus wrapping an existing
texture that then gets bound to the GL_TEXTURE_EXTERNAL_OES target
instead of our usual GL_TEXTURE_2D.
For completeness we also add a SamplerExternalOES variable type to
QShaderDescription, but the sampler type is not actually used by the
QRhi OpenGL backend, as it is the QRhiTexture that defines the
texture target.
Change-Id: I36b52325deb3703b59186ee3d726d0c3015bfc4b
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
...to the extent it is sensible. We have to make compromises still,
meaning some fields will only be applicable with certain APIs.
Most of this is already shown upon QRhi::create() as info debug
prints, when enabled. Now expose it all through the QRhi API as
well.
This is useful for printing in qtdiag, and, while it should be
avoided as much as possible, to make decisions about disabling
3D rendering features depending on the driver and GPU in use.
Change-Id: Iebe1e192965c928b82a094d1c7c50ddf4b38b9a2
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Those serve no purpose anymore, now that the .pro files are gone.
Task-number: QTBUG-88742
Change-Id: I39943327b8c9871785b58e9973e4e7602371793e
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
QTextDocument and the text editor classes suggest to override
their loadResource() methods to provide data associated with
a text document. This approach has the following drawbacks:
- it requires subclassing
- there is no way to set a global resource provider
- QLabel is missing virtual loadResource() method and
it can't be added without breaking ABI
QUrlResourceProvider is designed to solve these issues.
One should create a derived class that implements
QUrlResourceProvider::resource(). The objects of the derived
class then can be set for any text document.
The default resource provider can be set with
QUrlResourceProvider::setDefaultProvider().
This change also adds QLabel::setResourceProvider(),
which doesn't break ABI.
[ChangeLog][QtGui][Text] Introduced QUrlResourceProvider that allows to
load resources for HTML. It is intended to replace the use of
QTextDocument::loadResource().
Change-Id: Iaf19b229f522a73508f20715257450fe58f68daf
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
With the introduction of QKeyCombination, the result of |'ing together
a set of modifiers and a key goes always through the same QKeySequence
constructor, no matter the order.
The implicit conversion through int when the wrong order is used
causes a compiler warning as that conversion is deprecated. So remove
that test case.
Pick-to: 6.0
Change-Id: I04e27bcd51723ee0efc77e52e45ca3eb8bac5fc7
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Most tests fail when running on QEMU ARMv7, but not on target HW or
QEMU ARM64.
Task-number: QTBUG-89819
Change-Id: I686268c200cce1a44a717b80c2970f608be44636
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Remove the qmake project files for most of Qt.
Leave the qmake project files for examples, because we still test those
in the CI to ensure qmake does not regress.
Also leave the qmake project files for utils and other minor parts that
lack CMake project files.
Task-number: QTBUG-88742
Change-Id: I6cdf059e6204816f617f9624f3ea9822703f73cc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Blacklist qfont tests that don't work correctly with qemu.
Task-number: QTQAINFRA-3836
Change-Id: I7f5d4b07428febb0adb82d38203226b5c56a2ad5
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Complete search and replace of QtTest and QtTest/QtTest with QTest, as
QtTest includes the whole module. Replace all such instances with
correct header includes. See Jira task for more discussion.
Fixes: QTBUG-88831
Change-Id: I981cfae18a1cabcabcabee376016b086d9d01f44
Pick-to: 6.0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Apparently some library definitions went overboard, link them directly.
Pick-to: 6.0
Change-Id: I009737f7e3edff5619241b700a627dc4e25e6018
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This is the most basic way to represent custom transfer functions.
Change-Id: I529fb647ece82c03e85ef77b056d9daf13fe5a61
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
QColors were not premultiplied before being set.
Pick-to: 6.0 5.15 5.12
Change-Id: Id3765b6932a72374ddfd788fae4bb628a4edf0b7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
If the first font in the families list happens to have been
disambiguated because of duplicates, two things went wrong:
1. hasFamily() would return false for the font family, because
it does not disambiguate when checking for the family name and
only checks if the families list contains the exact string.
2. Adding aliases to the full disambiguated string is not supported,
only the family name.
The first issue has been reported separately as QTBUG-89068.
The test failure is fixed by just avoiding the fonts that
are ambiguous in the test, as it really doesn't matter which
font we pick.
Fixes: QTBUG-89008
Pick-to: 5.15 6.0
Change-Id: I829778c2e7bb6090475c34dcf9cdce58862729d6
Reviewed-by: Liang Qi <liang.qi@qt.io>
This patch disables four failing unit tests when executed with the
offscreen backend.
Change-Id: Ie67341b886984e6de19cd8dd8a8a237a620a1b7a
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
The former also does fuzzy comparison, but it reports what the values
were, if the test ever fails.
Change-Id: I36ecda1f69bf3f430c904b37cd8c3a23201ab7e2
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
QTextCharFormat::fontFamily is deprecated in favor of fontFamilies,
which returns a QStringList wrapped in a QVariant, whereas the setter
expects a QStringList.
Change-Id: I3333eaae4fc5ec3e3bdbec58047d6b3554b4a171
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Make the string into a list and call setFontFamilies.
Pick-to: 6.0
Change-Id: I1b70db784fd6e495b48917141d07bacd1e883882
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Not testing the result of the copying, just verifying that it doesn't
assert.
Pick-to: 6.0
Change-Id: Ib51129134b74c17eada7e3819ccfff10bb9affbf
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The QFont::fromString() needs to differ between strings
produced before and after Qt 6.0 when interpreting the
weight value, since in older strings this will be the legacy
scale.
Luckily the number of tokens in the string can be used for this
purpose, since many tokens were added in Qt 6.0.
This broke KDE, where font settings are stored in QSettings
and serialized using QFont::toString() from Qt 5.
Fixes: QTBUG-88589
Pick-to: 6.0.0 6.0
Change-Id: I199737fed61917f8b9d8f86176ead29a89eb8e0c
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
By depending on setFamilies() then we can be sure that font names with
spaces, commas, quotes and so on are correctly handled without being
misinterpreted. For now it will split on the comma when a string
containing one is passed to setFamily. But from Qt 6.2 this will be
removed to preserve the family string as a convenience function.
[ChangeLog][QtGui][QFont] Indicated that setFamilies/families is
preferred over setFamily/family to ensure that font family names are
preserved when spaces, commas and so on are used in the name.
Change-Id: Id3c1a4e827756a4c928fed461a4aafa5a0f06633
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
This reverts commit ee122077b0.
Reason for revert: This causes QProcess::readAll() to sometimes
return nothing after the process has ended.
Fixes: QTBUG-88624
Change-Id: I34fa27ae7fb38cc7c3a1e8eb2fdae2a5775584c2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
(cherry picked from commit 23100ee61e33680d20f934dcbc96b57e8da29bf9)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Ensure the values are reasonable regardless of screen DPI. Velocity
is supposed to be in logical pixels / second.
Task-number: QTBUG-88252
Task-number: QTBUG-88346
Change-Id: Ic209887f8ed0381c033a9ff04ae48b072c444df4
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
A QWindow created without an explicit geometry needs to pick up
a default geometry in the platform plugin. If the window has a
maximized of fullscreen window state, it will fill the entire
available geometry of the parent window (or the screen if there's
not parent window).
Fixes: QTBUG-69159
Fixes: QTBUG-69156
Fixes: QTBUG-69154
Pick-to: 5.15
Change-Id: If8565d92a97bb4b3fa44757e68969d54d0bc7ebe
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When a foreign event loop that does not enter an alertable wait state
is running (which is also the case when a native dialog window is
modal), pipe handlers would freeze temporarily due to their APC
callbacks not being invoked.
We address this problem by moving the I/O callbacks to the Windows
thread pool, and only posting completion events to the main loop
from there. That makes the actual I/O completely independent from
any main loop, while the signal delivery works also with foreign
loops (because Qt event delivery uses Windows messages, which foreign
loops typically handle correctly).
As a nice side effect, performance (and in particular scalability)
is improved.
Several other approaches have been tried:
1) Using QWinEventNotifier was about a quarter slower and scaled much
worse. Additionally, it also required a rather egregious hack to
handle the (pathological) case of a single thread talking to both
ends of a QLocalSocket synchronously.
2) Queuing APCs from the thread pool to the main thread and also
posting wake-up events to its event loop, and handling I/O on the
main thread; this performed roughly like this solution , but scaled
half as well, and the separate wake-up path was still deemed hacky.
3) Only posting wake-up events to the main thread from the thread pool,
and still handling I/O on the main thread; this still performed
comparably to 2), and the pathological case was not handled at all.
4) Using this approach for reads and that of 3) for writes was slightly
faster with big amounts of data, but scaled slightly worse, and the
diverging implementations were deemed not desirable.
Fixes: QTBUG-64443
Change-Id: I1cd87c07db39f3b46a2683ce236d7eb67b5be549
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Tests in tst_qhighdpi are crashing on Android.
Task-number: QTBUG-88505
Task-number: QTBUG-87025
Change-Id: Ie1350e06fb30d90f20c550f91555f4023eee56b6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
These tests are failing with "java.lang.UnsatisfiedLinkError: dlopen
failed: invalid ELF file" at the start, excluding them now to enable
Android testing until they're fixed later.
Task-number: QTBUG-87671
Task-number: QTBUG-87025
Change-Id: Ida7d7158fccdc31df1f9689f77fde832964d732f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
QChar should not be convertible from any integral type except from
char16_t, short and possibly char (since it's a direct superset).
David provided the perfect example:
if (str == 123) { ~~~ }
compiles, with 123 implicitly converted to QChar (str == "123"
was meant instead). But similarly one can construct other
scenarios where QString(123) gets accidentally used (instead of
QString::number(123)), like QString s; s += 123;.
Add a macro to revert to the implicit constructors, for backwards
compatibility.
The breaks are mostly in tests that "abuse" of integers (arithmetic,
etc.). Maybe it's time for user-defined literals for QChar/QString,
but that is left for another commit.
[ChangeLog][Potentially Source-Incompatible Changes][QChar] QChar
constructors from integral types are now by default explicit.
It is recommended to use explicit conversions, QLatin1Char,
QChar::fromUcs4 instead of implicit conversions. The old behavior
can be restored by defining the QT_IMPLICIT_QCHAR_CONSTRUCTION
macro.
Change-Id: I6175f6ab9bcf1956f6f97ab0c9d9d5aaf777296d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It's unnecessary, and copying QEvents is a bad practice since it's a
polymorphic class.
Change-Id: Ieb6de106084f838c5e6c8a0643c54fd3c7f4a7a8
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The dot product used rows instead of columns.
Pick-to: 5.15 5.12
Fixes: QTBUG-87984
Change-Id: I922f67ed0fa9a4f88aa4e9fc6d3c09f8dda21688
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The logic in qgrayraster was ready for it except for an intermediate
format. qrasterizer.cpp and qcosmeticstroker.cpp uses a dot-16 fixed
point format, and had to be changed to handle higher coordinates on
64-bit architectures.
Fixes: QTBUG-84428
Change-Id: I85ab7a04e38bd0dbcefa9f16c16ccc84785a33cf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Bring QPixmapIconEngine on par with QIconLoaderEngine
when it comes to @Nx pixmap handling: Make the scale
factor a test parameter during icon lookup.
This allows storing e.g 16x16@1, 16x16@2, 16x16@3 versions
of a pixmap in the icon, and then having QIcon select
the correct one based on the target devicePixelRatio.
Extend the qiconhighdpi test to also cover QPixmapIconEngine,
via the addPixmap() API.
The corner cases of pixmap lookup can be much complicated.
QIconLoaderEngine and QPixmapIconEngine should ideally
have identical behavior in order to avoid surprises.
Change-Id: I17552cc61755bff9553c4a462e3983ac6759c13b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The type is specific about printing, so give it a name in line with
QPageLayout and QPageSize.
As per API review comment, it's not clear why this type should not be a
regular, copyable and movable value type. It stores a list of intervals.
Give it value-type semantics, as an implicitly shared class.
Convert the parse method into a static factory function.
Add a Range type and use it instead of the semantic-free QPair.
Move QPrinter getter into QPagedPainteDevice, make it return a copy
rather than a pointer, and add a setter.
Extend test case to cover all members and more merge cases. Fix bugs
found that way.
Fixes: QTBUG-88113
Change-Id: If17ea4d410d49f16b097e88b7979db5d72add820
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
MarkdownDialectGitHub now includes this feature, so *emph* is italicized
and _emph_ is underlined. This is a better fit for QTextDocument capabilities;
until now, _underlined_ markdown could be read, but would be rendered with
italics, because in CommonMark, *emphasis* and _emphasis_ are the same.
But QTextMarkdownWriter already writes underlining and italics distinctly
in this way.
[ChangeLog][QtGui][Text] By default (with MarkdownDialectGitHub), markdown
_underline_ and *italic* text styles are now distinct.
Fixes: QTBUG-84429
Change-Id: Ifc6defa4852abe831949baa4ce28bae5f1a82265
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This makes high-level event dispatching easier: for example we often
need to cast an event to access getters like button() and buttons().
We can so far assume that any QPointerEvent that is not a QTouchEvent
is a QSinglePointEvent; but more explicit type-checking looks safer.
Implemented in a similar way as c7f7279969.
Change-Id: I980d759e2a7538b6b30fd3bdc3be0c351ec6c246
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
There’s no need to convert the file name/path to QUrl,
and then back again to QString before calling qt_findAtNxFile().
Call qt_findAtNxFile first, and then convert to QUrl.
This makes sure the url-name and string-name stays
in sync.
Change-Id: I8b8939eabbdaff473945ebe31faafd408e9c4295
Pick-to: 5.15
Fixes: QTBUG-60793
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
We want to re-enable Android tests in QTQAINFRA-3867. However,
many tests are failing already preventing that from happening.
QTBUG-87025 is currently keeping track (links) to all of those
failing tests.
The current proposal is to hide those failing tests, and enable
Android test running in COIN for other tests. After, that try
to fix them one by one, and at the same time we can make sure
no more failing tests go unnoticed.
Task-number: QTBUG-87025
Change-Id: Ic1fe9fdd167cbcfd99efce9a09c69c344a36bbe4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In 4e400369c0 we deprecated
normalizedPos() because we suspect it's a legacy feature that few
users will need. However Qt developers keep bringing up the continued
usage in autotests over and over. (It's IMO not wrong to keep testing
deprecated functions in autotests, but the warning keeps attracting
attention.)
Of course it will turn out that normalizedPos() has users; we just
don't know how many. One way to look at it is: why should they copy
a snippet of code to calculate it, when it costs us so little to
continue to provide this accessor.
It might also turn out that some users will complain that in Qt 5
it was passed through from the device driver (or at least from the
window system API) to the application, and perhaps the replacement will
not always work, for example if availableVirtualGeometry() ends up
wrong, or there is some strange scenario that generates events that are
out-of-bounds for the device that the event professes to come from, so
that the "normalized" coordinates also go outside the [0..1] range.
We reserve the right to put back the storage in QEventPointPrivate if
the need arises; so that's why this function is not inline.
We continue to hope that startNormalizedPos() and lastNormalizedPos()
are used even less and won't be missed much, because it would be
wasteful to store them all the time if only a few users need them.
Change-Id: I23ed78843e3f9e16133c5b6f462884a3845f91b6
Reviewed-by: David Skoland <david.skoland@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
All QFontDatabase APIs are static, use them accordingly.
Task-number: QTBUG-88114
Change-Id: I0e4a7508646037e6e2812611262eed8b6d7ad3de
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
It's been obsolete for a long time already. Make sure
the compiler now warns about it and remove all remaining
uses in qtbase.
Change-Id: I0ff80311184dba52d2ba5f4e2fabe0d47fdc59d7
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Keep this in sync with the changes we have done in QTypeInfo.
Change-Id: Iaacb0f3cc5c46d3486084a1f6eca480a233d5e1a
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
In Qt Quick, when we deliver an item-specific QTouchEvent that contains
only the subset of eventpoints that are inside the Item's bounds,
traditionally the Item can accept the event to tell the delivery logic
that the event is handled and doesn't need to be delivered further.
But an Item cannot be expected to have total scene awareness; so now,
the delivery is "done" only when all eventpoints in the original event
are accepted. This behavior has been working well enough already due to
logic in QQuickWindow that iterates the points and accepts them if the
event is accepted; but it seems appropriate to move this enforcement
into QPointerEvent itself. Making setAccepted() virtual gives us a
useful degree of freedom.
Event-handling code should alternatively use QEventPoint:setAccepted()
or QPointerEvent::setExclusiveGrabber() to take resonsibility for only
a subset of the touchpoints.
Another way to put it is that we treat QPointerEvent::setAccepted() as a
convenience method: accepting the QEventPoints is what counts (at least
in Qt Quick).
Change-Id: Icec42dc980f407bb5116f5c0852c051a4521105a
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Leave the normalizedPos warnings, there is no equivalent function.
Change-Id: I50c72ab24b4855e36941aafdee30cdb0e94c1684
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Expose event would not be sent when window was resized
Fixes: QTBUG-69155
Pick-to: 5.15
Change-Id: I81bf2d54f830a0dabf15398e1f25b55ff7ff4479
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Rami Potinkara <rami.potinkara@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Failure to copy m_inputEvent and m_pointerEvent actually left them
uninitialized, and resulted in random behavior in Qt Quick when
Flickable clones a pointer event for later replay.
Remove the comment about copying events being a "bad idea" in Qt 4,
while we're at it. Copying became more common in Qt 5, and we
probably won't be able to stop doing it now.
Change-Id: I40b6ba5ad696e7aaafbeefbca86eca00cab40616
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Move the factor() test, drop scale() which should be
covered already.
Change-Id: Id2079536a91c7e9f7199960bdf6b33489d0a6670
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Use the new screen config feature of the offscreen
platform plugin to run tests on virtual screen setup.
This has the benefit that we can auto-test the QHighDpiScaling
implementation (as well as its usage in QtGui) on any platform
with a fixed mock screen setup which does not rely on physical
screen configuration.
Test the following configurations:
- three screens: 96 DPI. (reference)
- three screens: 192 DPI
- three screens: mixed (high) DPI
Change-Id: I2fac889d896cf30ab2a79c306cee22177ad8f4ac
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The return value can be ignored here, so make intention clear.
Change-Id: I116869c47039b159db96f133b5850a2215873c2f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Tests the move semantics of QImage in Qt6.
Change-Id: Ia4d95f0b88ca7dde0daf85a0f53049b42b5be1a5
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
If the difference between the families sizes is just 1 where one of them
is 0 in size then we can fallback to the family in that case.
Pick-to: 5.15
Fixes: QTBUG-87267
Change-Id: I62b25b06c88000b4d7defe91871c07873b1fc792
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The original restriction to UniformBuffer was due to the GL backend
where there is no GL buffer object for QRhiBuffers with usage
UniformBuffer. However, we can still implement this for cases when
there is a true GL buffer object underneath. With other backends it
should all work as-is already.
This becomes useful when one has buffers with usage Vertex that need
full updates every frame. (f.ex. instance data)
Unfortunately this involves renaming the function. But while at it, add
an autotest case as well.
Change-Id: Iff59e4509a8bae06654cc92fe8428bd79eb012fb
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
This time based on grepping to also include documentation, tests and
examples previously missed by the automatic tool.
Change-Id: Ied1703f4bcc470fbc275f759ed5b7c588a5c4e9f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
We were already using the 'native' nomenclature when referring to these
kinds of APIs, e.g. when talking about native handles, or the existing
QPlatformNativeInterface on a QPA level. Using 'native' for the user
facing APIs also distinguishes them from the 'platform' backend layer
in QPA and elsewhere.
Change-Id: I0f3273265904f0f19c0b6d62471f8820d3c3232e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
During delivery of a TouchBegin event, if no widget accepts it,
we begin treating the first touchpoint as a synth-mouse, as before.
If a second touchpoint is pressed or released in any order, it's
irrelevant: the fake mouse button is released as soon as the first
touchpoint is released. This fixes the bug that such a scenario
caused the mouse release not to be sent, so that a widget could get
"stuck" in pressed state.
Done-with: Tang Haixiang <tanghaixiang@uniontech.com>
Fixes: QTBUG-86253
Pick-to: 5.15
Change-Id: I7fbbe120539d8ded8ef5e7cf712a27bd69391e02
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reports on the Web have it that there's nothing guaranteeing a
driver does any actual freeing of resources then doing
vkFreeCommandBuffer for a command buffer from a command pool that
does not have VK_COMMAND_POOL_CREATE_RESET_COMMAND_BUFFER_BIT, thus
leading to continuously growing resource usage with our current
allocate/free pattern. It could be that this is the source of out
of memory problems we are seeing on some Android devices.
Instead of just going straight for said command pool flag and doing
ResetCommandBuffer for the command buffers individually, take one
step further and use per-slot (slot being 0 or 1 if QVK_FRAMES_IN_FLIGHT
is 2) command pools. The current pool is reset in each
beginFrame/beginOffscreenFrame, moving all allocated command buffers
to the initial state (while other command buffers with the other pool
are not affected).
This may be (while impossible to tell from just guessing based on the
spec) our best approach to command buffer allocation since a Vulkan
implementation can likely just use some simple per pool allocator,
knowing that we never want to free or reset individual command buffers,
but we rather only reset the whole pool at once.
The option of importing an existing VkCommandPool when creating the
QRhi instance is now gone, but there was probably no point in offering
that in the first place.
When it comes to VK_COMMAND_POOL_RESET_RELEASE_RESOURCES_BIT it will
not be set unless releaseCachedResources() (in Qt Quick this is hooked
into QQuickWindow::releaseResources()) was called. What this does in
practice is unknown, but have an option to set it now and then if the
application really wants.
While we are at it, rename secondaryCbs to activeSecondaryCbStack to
indicate what it really is. (it's a stack as each call to
beginExternal() pushes a new one, while each endExternal() pops)
Change-Id: I2e5c1fad26d794e1f56c778e38f750998d706d84
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
ExternalContentsInPass becomes a per-pass flag now. Why is this
beneficial? Because while Qt Quick has no choice for its render
pass, not being able to guess if the application wants to do some
native rendering in there, Quick 3D's render passes, all the ones
that are under Quick3D's control, do not have native rendering
from the application in them, and so using secondary command
buffers with Vulkan is not necessary.
Introduce something similar for compute and OpenGL. By knowing that
none of the resources used in a pass are used with a compute pass
(e.g. because we know that there are no compute passes at all) a small
amount of time can be saved by skipping tracking buffers and textures
because the only purpose of said tracking is to generate barriers that
are relevant only to compute.
Change-Id: I0eceb4774d87803c73a39db527f5707a9f4d75c1
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
It also demonstrated that the tests were out of sync with reality:
since a97759a336c597327cb82eebc9f45c793aec32c9 QMouseEvent::button()
and QWindowSystemInterfacePrivate::MouseEvent::button should be the
button that changes state of course; but when a button is pressed,
we are reacting to it after the fact, so QMouseEvent::buttons() and
QWindowSystemInterfacePrivate::MouseEvent::buttons should include the
new button that was just pressed. Likewise when a button was released,
we send the event with buttons _omitting_ the button that was just
released.
Amends 147a8bc4c8 and
6d6ed64d6c
Change-Id: I670289019fcfa7de685ca38799804772dc0f1c8f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This reverts commit b1ef104866.
This test is BPASS on openSUSE_42_3 for 5.12 and PASS on openSUSE_15_1
for 5.15.
Pick-to: 5.15
Pick-to: 5.12
Change-Id: Ia1d81ed38491c27c01f270623c5082663f4da699
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Change lots of code to avoid the deprecated operator+() or implicit
casts to int.
Change-Id: I0c343cd5b28603afdf1214eefb85e928313345e2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Do not always use the smoothScaled routine, the normal routines are
also optimized, and do not convert to alpha formats when not necessary.
Task-number: QTBUG-49719
Change-Id: I6ee9b620cc259472c419e7363357f41ce29b594a
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
It already has a move-assignment operator, and implements swapping.
This requires a specialization of the QExplicitlySharedDataPointer
destructor to be forward declared, and an implementation that is
identical to the default version. Otherwise we would need
QPlatformPixmap to be fully defined in the public QPixmap header.
Change-Id: I2651bbc29a7083a93e3b3ad671d3aeea659b7d5a
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Colors with wrong number of elements are now invalid.
Change-Id: I32c934894de86095d9790baa5f0d2001d76bcd3c
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Modify special case locations to use the new API as well.
Clean up some stale .prev files that are not needed anymore.
Clean up some project files that are not used anymore.
Task-number: QTBUG-86815
Change-Id: I9947da921f98686023c6bb053dfcc101851276b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Clean up the state of the projects,
before changing the internal CMake API function names.
Task-number: QTBUG-86815
Change-Id: I90f1b21b8ae4439a4a293872c3bb728dab44a50d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
tst_qguiapplication was missing an Info.plist file.
We can't directly reference the tst_qcoreapplication Info.plist
file like the qmake project does, because that breaks ninja
(says multiple rules create the same output file), so use a
copy instead.
Blacklist the qpluginloader loadMachO test when doing CMake builds.
The qmake projects use multiple custom rules to build the macho
plugins, which need to be ported to CMake.
Task-number: QTBUG-86053
Task-number: QTBUG-86792
Change-Id: Iaff2b2d5e9e84a457b4f2ffc011a580388498f00
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Changes the definition of invalid QRects to be more consistent.
This simplifies the logic, and makes it possible for us to fix
normalized() so dimensions don't change.
The actual API is not changed except for inverted rects.
Only one use-case for the old normalized() function existed,
and has been reimplemented as QRect::span().
Fixes: QTBUG-22934
Change-Id: I29dad2952dc6c8e84a6d931898dc7e43d66780f3
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Do not use QVariant::Type anymore, instead use QMetaType
For some reason, this pushed the qvariant autotest over the limit where
MSVC requires the /bigobj flag, so add that one.
[ChangeLog][QtCore][QMimeData] The signature of the virtual retrieveData()
function has changed and now takes a QMetaType instead of a QVariant::Type.
Change-Id: Ib46773bd731ee2177b1ef74d8162d744be7017ef
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
These states correspond well with ScrollPhase, and this abstraction
makes it possible to handle wheel events the same way as mouse events
in Qt Quick: on "begin" we deliver to all Items and Handlers until
all points (the only point) are accepted; on "update" and "end" we
deliver only to the exclusive grabber, if there is one, and to any
passive grabbers.
Change-Id: I702dbd4f2c1bf5962eb3dbb9e4b725300a00a887
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It is lossy, so should be requested explicitly, using a dedicated
fromPixmap factory function.
Deprecate the constructor and assignment operator, and make the
constructor explicit.
[ChangeLog][QtGui][QBitmap] Implicitly constructing and assigning
to a QBitmap from a QPixmap has been deprecated, and the respective
constructor has been made explicit. Use the fromPixmap factory
function instead.
Change-Id: I68ce85b26c901415137b664a1db687021d48bae0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Adjust to changes to QIcon::pixmap, QMetaType::type, and
QAbstractItemView::itemDelegate.
Change-Id: I9eb0331ef899131afc86c33f27feeee76331ffc8
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
In 4e400369c0 we began to send synth-mouse
events from the touch device, but in the opposite direction it was not
consistent.
Add autotests to prove that it's consistent both ways now.
Change-Id: I7df2328fef224dc1529ca5d27411cd8a5a9c8df9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This functionality was only in Qt Quick in Qt 5. Now we move it up to QtGui
so that every QEventPoint will have a valid velocity() before being delivered
anywhere.
[ChangeLog][QtGui][QPointerEvent] Every QEventPoint should now carry a valid
velocity(): if the operating system doesn't provide it, Qt will calculate it,
using a simple Kalman filter to provide a weighted average over time.
Fixes: QTBUG-33891
Change-Id: I40352f717f0ad6edd87cf71ef55e955a591eeea1
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QQuickEventPoint instances were very long-lived and got reused from one
event to the next. That was initially done because they were "heavy"
QObjects; but it also became useful to store state in them between
events. But this is in conflict with the ubiquitous event replay
code that assumes it's OK to hold an event instance (especially
a QMouseEvent) for any length of time, and then send it to some widget,
item or window. Clearly QEventPoints must be stored in the QPointerEvent,
if we are to avoid the need for workarounds to keep such old code working.
And now they have d-pointers, so copying is cheap. But replay code
will need to detach() their QEventPoints now.
QEventPoint is useful as an object to hold state, but we now store
the truly persistent state separately in an EventPointData struct,
in QPointingDevicePrivate::activePoints. Incoming events merely
update the persistent points, then we deliver those instead.
Thus when event handler code modifies state, it will be remembered
even when the delivery is done and the QPA event is destroyed.
This gets us a step closer to supporting multiple simultaneous mice.
Within pointer events, the points are moved up to QPointerEvent itself:
QList<QEventPoint> m_points;
This means pointCount(), point(int i) and points() can be non-virtual.
However in any QSinglePointEvent, the list only contains one point.
We hope that pessimization is worthwhile for the sake of removing
virtual functions, simplifying code in event classes themselves, and
enabling the use of the range-for loop over points() with any kind of
QPointerEvent, not just QTouchEvent. points() is a nicer API for the
sake of range-for looping; but point() is more suited to being
non-const.
In QML it's expected to be OK to emit a signal with a QPointerEvent
by value: that will involve copying the event. But QEventPoint
instances are explicitly shared, so calling setAccepted() modifies
the instance in activePoints (EventPointData.eventPoint.d->accept);
and the grabbers are stored separately and thus preserved between events.
In code such as MouseArea { onPressed: mouse.accepted = false }
we can either continue to emit the QQuickMouseEvent wrapper
or perhaps QEvent::setAccepted() could become virtual and set
the eventpoint's accepted flag instead, so that it will survive
after the event copy that QML sees is discarded.
The grabChanged() signal is useful to keep QQuickWindow informed
when items or handlers change exclusive or passive grabbers.
When a release happens at a different location than the last move event,
Qt synthesizes an additional move. But it would be "boring" if
QEventPoint::lastXPosition() accessors in any released eventpoint always
returned the same as the current QEventPoint::xPosition()s just because
of that; and it would mean that the velocity() must always be zero on
release, which would make it hard to use the final velocity to drive an
animation. So now we expect the lastPositions to be different than
current positions in a released eventpoint.
De-inline some functions whose implementations might be subject to
change later on. Improve documentation.
Since we have an accessor for pressTimestamp(), we might as well add one for
timestamp() too. That way users get enough information to calculate
instantaneous velocity, since the plan is for velocity() to be somewhat
smoothed.
Change-Id: I2733d847139a1b1bea33c00275459dcd2a145ffc
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The qfilesystemmodel.pro was recently moved to the gui tests subfolder,
but it uses widgets inside. Skip it in a no-widgets build.
Amends fb9ec8ad44
Task-number: QTBUG-86187
Change-Id: I955556ffddad483d4c25602ae126b8c2433091b2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
As per ### Qt6 comment. Also rename the LibraryLocation enum
to LibraryPath.
Change-Id: I556025a19c5bcdf2ff52598eaba32269522d4128
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There is no reason to use double precision for colors. We at most have
16 significant bits anyway.
Change-Id: I8b402cd978675b8ba7248176976d934363212ff1
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Remove around 1000 compiler warnings about missing overrides
in our auto tests.
This significantly reduce the compiler warning noise in our auto
tests, so that one can actually better see the real problems
inbetween.
Change-Id: Id0c04dba43fcaf55d8cd2b5c6697358857c31bf9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Gives it its own changed signal, and simplifies setting from group,
while fixing an inconsistency in propagation.
Change-Id: I22b243210260a8878144fa4b60204df46f847f37
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
I still have doubts that QEventPoint can't be made small enough that
copying would be cheaper than reference-counting and all the indirections
in now-noninline accessors, but this gives us the usual freedom to
change the data members later on.
Change-Id: I792f7fc85ac3a9538589da9d7618b647edf0e70c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Because we removed public setters from QTouchEvent and QEventPoint in
4e400369c0 and now it's proposed to give
QEventPoint a d-pointer again, the implementation of QTouchEventSequence
needs to start using QMutableEventPoint: being a friend will no longer
be enough, because the member variables won't be accessible in the future.
But because we have separate test libs for Gui and Widgets, it needs to
be further refactored into two classes.
Change-Id: I0bfc0978fc4187348ac872e1330d95259d557b69
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Following the introduction of QKeyCombination, reduce the number
of warnings raised by the test. Drive-by, remove some pointless
math like Qt::SHIFT+0, which does not make any sense and would
actually fail to compile (shortly).
Refactoring the test to fully use QKeyCombination (instead of
ints) is left as a future exercise; some QKeyCombination->int
warnings are still around.
Change-Id: If825bc4c369986623447927bb11493c4f58b544f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Adjusting the QPrinter test case - some use cases no longer exist, or are
already tested in QPageSize and QPageLayout tests.
Adjust examples and manual tests.
Change-Id: I01cbc65f3d8031aea2dac86dd942126ba708b111
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
C++20 via P1120 is deprecating arithmetic operations between
unrelated enumeration types, and GCC 10 is already complaining.
Hence, these operations might become illegal in C++23 or C++26 at
the latest.
A case of this that affects Qt is in key combinations: a
QKeySequence can be constructed by summing / ORing modifiers and a
key, for instance:
Qt::CTRL + Qt::Key_A
Qt::SHIFT | Qt::CTRL | Qt::Key_G (recommended, see below)
The problem is that the modifiers and the key belong to different
enumerations (and there's 2 enumerations for the modifier, and one
for the key).
To solve this: add a dedicated class to represent a combination of
keys, and operators between those enumerations to build instances
of this class.
I would've simply defined operator|, but again docs and pre-existing
code use operator+ as well, so added both to at least tackle simple
cases (modifier + key).
Multiple modifiers create a problem: operator+ between them yields
int, not the corresponding flags type (because operator+ is not
overloaded for this use case):
Qt::CTRL + Qt::SHIFT + Qt::Key_A
\__________________/ /
int /
\______________/
int
Not only this loses track of the datatypes involved, but it would
also then "add" the key (with NO warnings, now its int + enum, so
it's not mixing enums!) and yielding int again.
I don't want to special-case this; the point of the class is
that int is the wrong datatype. Everything works just fine when
using operator| instead:
Qt::CTRL | Qt::SHIFT | Qt::Key_A
\__________________/ /
Qt::Modifiers /
\______________/
QKeyCombination
So I'm defining operator+ so that the simple cases still work,
but also deprecating it.
Port some code around Qt to the new class. In certain cases,
it's a huge win for clarity. In some others, I've just added
the necessary casts to make it still compile without warnings,
without attempting refactorings.
[ChangeLog][QtCore][QKeyCombination] New class to represent
a combination of a key and zero or more modifiers, to be used
when defining shortcuts or similar.
[ChangeLog][Potentially Source-Incompatible Changes] A keyboard
modifier (such as Qt::CTRL, Qt::AltModifier, etc.) should be
combined with a key (such as Qt::Key_A, Qt::Key_F1, etc.) by using
operator|, not operator+. The result is now an object of type
QKeyCombination, that stores the key and the modifiers.
Change-Id: I657a3a328232f059023fff69c5031ee31cc91dd6
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Port the high-dpi icon test to use the new pixmap()
API which takes the target devicePixelRatio as an argument.
This means we can run the fromTheme test at dpr = {1,2,3},
instead of at the current global devicePixelRatio only.
Task-number: QTBUG-85885
Change-Id: Iec7b21e04ed760e48964307d2048eaec1976ffe2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Without an override for logicalDpi() the base class implementation
would use the geometry of the screen to figure out the DPI, and end
up with ~100, which combined with a 96DPI base logical DPI would
give a wrong scale factor.
Change-Id: I68aecce44d2ee672c7b707dfe5444af8f551e961
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Add new QIcon::pixmap() overload:
QPixmap pixmap(const QSize &size, qreal devicePixelRatio, ...)
This function replaces the existing pixmap() function which
take a QWindow pointer, and should be more convenient in use.
Task-number: QTBUG-85885
Change-Id: Ie4ca96a266d9278864678dc61bdfc2836cabdb93
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The explicit paint event on QtGui and QPA level allows us to untangle
the expose event, which today has at least 3 different meanings.
It also allows us to follow the platform more closely in its semantics
of when painting can happen. On some platforms a paint can come in
before a window is exposed, e.g. to prepare the first frame. On others
a paint can come in after a window has been de-exposed, to save a
snapshot of the window for use in an application switcher or similar.
The expose keeps its semantics of being a barrier signaling that the
application can now render at will, for example in a threaded render
loop.
There are two compatibility code paths in this patch:
1. For platform plugins that do not yet report the PaintEvents
capability, QtGui will synthesize paint events on the platform's
behalf, based on the existing expose events coming from the platform.
2. For applications that do not yet implement paintEvent, QtGui will
send expose events instead, ensuring the same behavior as before.
For now none of the platform plugins deliver paint events natively,
so the first compatibility code path is always active.
Task-numnber: QTBUG-82676
Change-Id: I0fbe0d4cf451d6a1f07f5eab8d376a6c8a53ce8c
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Remove QTypeInfo::isStatic, as that's not used anymore in Qt 6.
Also remove sizeOf, it's unused, and we have QMetaType for that if
required.
Remove all typeinfo declaractions for trivial types, as the default
template covers them correctly nowadays.
Finally set up a better default for isPointer, and do some smaller
cleanups all over the place.
Change-Id: I6758ed37dfc701feaaf0ff105cc95e32da9f9c33
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Having three methods with the same name doing different things is
unnecessarily confusing, so follow the standard naming convention in
Qt and call the getter of the resolve mask resolveMask, and the setter
setResolveMask. These methods were all documented as internal.
The publicly documented resolve() method that merges two fonts and
palettes based on the respective masks remains as it is, even though
'merge' would perhaps be a better name.
Change-Id: If90b1ad800834baccd1dbc38fc6b861540d6df6e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This makes high-level event dispatching easier: for example in Qt Quick,
all pointer events should eventually be delivered to items in a similar way.
Implemented in a similar way as d1111632e2.
Change-Id: I2f0c4914bab228162f3b932dda8a88051ec2a4d7
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This requires a QAbstractFileIconProvider in QtGui, as the standard
QFileIconProvider depends on QStyle, and cannot be moved out of
QtWidgets.
QAbstractFileIconProvider returns strings for file types, but returns
no icons yet. Support for a default icon set might be added in a
follow-up commit.
Change-Id: Ib9d095cd612fdcf04db62f2e40709fcffe3dc2b7
Fixes: QTBUG-66177
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
event()->device() was the most common use case anyway.
The idea that the "parent" of a QEventPoint is the QPointerEvent
interferes with the ability to copy and move event objects: the parent
pointers are dangling unless we use the QPointerEvent subclass
destructors to set the points' parents to null. Since there is no move
constructor, even returning a QEventPoint from a function by value
results in destroying the temporary instance and copying it to the
caller's space. So the parent pointer is often useless, unless we do
even more work to maintain it when the event moves.
If we optimize to avoid copying QEventPoints too much (and perhaps
enable exposing _mutable_ points to QML) by storing reusable instances in
QPointingDevice (which is the current plan), then the actual parent will
no longer be the event. Events are usually stack-allocated, thus
temporary and intended to be movable.
Change-Id: I24b648dcc046fc79d2401c781f1fda6cb00f47b0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
And remove one of the type id to name mapping that still
existed in QMetaType. QMetaTypeInterface can provide that,
so there's no need to have a second copy of the data.
qMetaTypeTypeInternal() can still map all the names of all
builtin types to ids. That functionality is for now still
required by moc and can't be removed yet.
Change-Id: Ib4f8e9c71e1e7d99d52da9e44477c9a1f1805e57
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
And remove the old manual registration code for those operators.
Add some special handling for long/ulong, as these types could be
streamed as a QVariant so far, but are not directly streamable
through QDataStream.
[ChangeLog][QtCore][QMetaType] The QMetaType::registerStreamOperators()
and QMetaType::registerDebugStreamOperator() methods have been
removed. The streaming operators for a type are now automatically
registered together with the type registration. This implies that the
operators should be visible wherever the type is visible and being used.
[ChangeLog][Behavior Incompatible Changes] Because the QDataStream and
QDebug serialization operators are automatically registered with
QMetaType, the declarations of those functions must be present at any
point where the type is used with QMetaType and QVariant.
Change-Id: I4a0732651b20319af4a8397ff90b848ca4580d99
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This extends to/fromString to include style strategy, capitalization,
letter and word spacing and stretch. QFont::fromString() keeps
compatibility with strings from earlier versions as well.
Fixes: QTBUG-67687
Change-Id: I5e95a58f1cd850214af2a7d8906a214facd4e661
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
MidButton had its // ### Qt 5: remove me
upgraded to Qt 6 at 5.0; but it dates back to 4.7.0
Replace the many remaining uses of MidButton with MiddleButton in the
process.
Pick-to: 5.15
Change-Id: Idc1b1b1816673dfdb344d703d101febc823a76ff
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
It is a valid use case to have a vertex shader with no
vertex attributes. Using gl_VertexID or gl_InstanceID
is enough to generate vertex data out of thin air.
Change-Id: If7689914624a84723923fd2d7aef355bda592e24
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
It was marked internal anyway. Use the constructor taking a
QMetaType instead.
Change-Id: I15b9cd0911aac063a0f0fe0352fa2c84b7f7c691
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Both normal and relaxed constexpr are required by our new minimum of
C++17.
Change-Id: Ic028b88a2e7a6cb7d5925f3133b9d54859a81744
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
isNull() would forward to the contained type and check that type's
isNull() method for some of the builtin types. Remove that behavior
and only return true in isNull(), if the variant is invalid, doesn't
contain data or contains a null pointer.
In addition, implement more consistent behavior when constructing
a QVariant using the internal API taking a copy from a void *.
isNull() should return true in both cases. This mainly changes behavior
for some corner cases and when using our internal API.
[ChangeLog][Important Behavior Changes] QVariant::isNull()
no longer returns true when the variant contains an object of some
type with an isNull() method, that returns true for the object;
QVariant::isNull() now only returns true when the variant contains
no object or a null pointer.
Change-Id: I3125041c4f8f8618a04aa375aa0a56b19c02dcf5
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Remove the compare method in the QVariant::Handler struct. Rely
on the generic support provided by QMetaType instead.
[ChangeLog][Important Behavior Changes][QVariant] QVariant will now use builtin support in
QMetaType to compare its content. This implies a behavioral change
for some graphical types like QPixmap, QImage and QIcon that will
never compare equal in Qt 6 (as they do not have a comparison
operator).
Change-Id: I30a6e7116c89124d11ed9052537cecc23f78116e
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We only support version 4 and 5 in Qt 6.0. 1 and 2 are already gone
(due to being based on binary JSON), now we remove 3 as well.
Task-number: QTBUG-81346
Change-Id: I3627dcc0587f1e36f11e93edf7172889e911d64e
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Employ RO0; inherit the constructors from the base class; and
do some code tidies as a drive by.
The inherited constructors bring in goodies like initializer_list
support.
Change-Id: Ia00a3f9b0ccbf182bf837bc65ba2305110c8dc60
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
mkspecs/features/qt.prf adds a dependency on the system threading
library if the Qt Core thread feature is enabled. Because qt.prf is
loaded by any public or internal Qt project, it's essentially a public
dependency for any Qt consumer.
To mimic that in CMake, we check if the thread feature is enabled, and
and set the Threads::Threads library as a dependency of Qt6::Platform,
which is a public target used by all Qt modules and plugins and Qt
consumers.
We also need to create a Qt6Dependencies.cmake file so we
find_package(Threads) every time find_package(Qt6) is called.
For the .prl files to be usable, we have to filter out some
CMake implementation specific directory separator tokens
'CMAKE_DIRECTORY_ID_SEP' aka '::@', which are added because we call
target_link_libraries() with a target created in a different scope
(I think).
As a result of this change, we shouldn't have to hardcode
Threads::Threads in other projects, because it's now a global public
dependency.
Task-number: QTBUG-85801
Task-number: QTBUG-85877
Change-Id: Ib5d662c43b28e63f7da49d3bd77d0ad751220b31
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
QFontDatabase is a singleton and all instances would share
a single, mutex-protected global data pointer. But some functions
were implemented as non-static functions. This caused a lot
of code on the form
QFontDatabase().families(...)
since there was no static access. Other functions were implemented
as static.
To consolidate, we make all functions static. This should be
source-compatible, but not binary compatible.
[ChangeLog][QtGui][Fonts] Some functions in QFontDatabase were in
principle static, but previously not implemented as such. All
member functions have now been made static, so that constructing
objects of QFontDatabase is no longer necessary to access certain
functionality.
Fixes: QTBUG-83284
Change-Id: Ifd8c15016281c71f631b53387402c942cd9c43f6
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
QQuickPointerEvent had them, so despite how trivial they look,
it's very convenient to keep using them in QQuickWindow rather than
duplicating these kinds of checks in various places, and for multiple
event types too.
Change-Id: I32ad8110fd2361e69de50a679ddbdb2a2db7ecee
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
After enabling Qt::AA_UseHighDpiPixmaps, QIcon::pixmap()
now returns pixmaps larger than the requested size on
devicePixelRatio > 1 screens.
Adapt tests to account for this changed behavior.
Skip tests where it’s unclear what the the expected
behavior is, or where the test logic does not apply
to dpr > 1.
This gives a clearer indication of where we are
(39 passed, 0 failed, 9 skipped), and enables using
the qicon test to catch regressions also when running
at dpr > 1.
Remove the "lowdpi" testcase flags from the qmake and
cmake project files.
Change-Id: Ia7ce722ae356fc496a91b54e9f5d590d13b9df62
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Only keep 3, 4, and 5 because 3 is the lowest version where binary JSON
is not used anymore.
Change-Id: Id0319e8eceb845017ed493d0ef6902b53050d5a6
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Some compilers implicitly captures, and will warn about the unused capture.
Change-Id: Ib5e1cc3956c7eb0dc87cee834cce8a2b3dd0d30b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The previous implementation multiplexed callback-based event
notification into a single proxy event (cf. 85403d0af), which was
in turn object-waited for (this was the case since the beginning
of public qt history). It makes more sense to multiplex into a
posted message, because that also works with foreign event loops
that do not know anything about our event objects.
Task-number: QTBUG-64443
Change-Id: I97945ac8b5d7c8582701077134c0aef4f3b5a18f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Not sure why this was disabled in the first place.
Change-Id: I66329b55fd46d03fd96818c6c7004718ddea5c79
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Move QWindowsMime (which was a public class in Qt 4 and moved to the QPA
plugin in Qt 5) to the platform namespace and add register functions to the
native application.
Move in test code from QtWinExtras.
Task-number: QTBUG-83252
Change-Id: Iaac440e2d5cb370110919921b1eeb779600b5b65
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Add conversions from/to HBITMAP, HICON to QImage. Split the pixmap
conversion functions apart to use them.
Task-number: QTBUG-81876
Change-Id: Ic0c41a402a1f6e9bec572fc4d691357bd48e6423
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
As of 951d490750, high-DPI support
for pixmaps is enabled by default, which makes this test fail
when running on a local system with a high-DPI display.
Change-Id: I3fe4674d19a57bf82aa32b01d470c714092f7e62
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Avoid parsing over the buffer limit, or interpreting non-hex
as hex.
This still leaves parsing of lines longer than 300 chars
unreliable
Change-Id: I1c57a7e530c4380f6f9040b2ec729ccd7dc7a5fb
Pick-to: 5.15 5.12
Reviewed-by: Robert Loehning <robert.loehning@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
It is unnecessary to create a QList container just for comparison.
Split out helpers for comparing sequence sizes and sequences from
qCompare(QList) and add a template for an array with a non-type template
parameter for the size.
One can then write something like:
const int expected[] = {10, 12,...};
QCOMPARE(QFontDatabase.pointSizes(...), expected)
Unfortunately, any commas in such an array will be misread by macro expansion
as macro argument separators, so any expected array with more than one entry
needs an extra macro expanding __VA_ARGS__.
Change-Id: Ie7c8dc20bf669bbb25f6d7f8562455f8d03968c8
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Expand the getSetCheck to include all properties, and add a test to
verify the fallback logic for the tooltip property.
Use the meta object system to set and check properties in the
tooltip-test to verify that things don't break when migrating to
the new property system.
Change-Id: I56355e8b436ede46701a124a9241ed26d2c706c5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Change the functions to operate in float and add the
QPoint versions as overload calling them. This is
more in-line with the event accessors using float
and allows for removing some workarounds using a delta when
converting touch points.
Leave QPlatformWindow::map(To/From)Global() as is
for now and add helpers for float.
Change-Id: I2d46b8dbda8adff26539e358074b55073dc80b6f
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
In this case the srb represents the layout only, and can still be used
to create a pipeline. For setShaderResources() one will then need to use
another, layout compatible, srb that references valid resources.
Change-Id: I3ea5b63df3be8847540ca4c0c40fbd29dbed8fb7
Reviewed-by: Paul Lemire <paul.lemire@kdab.com>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Some goals that have hopefully been achieved are:
- make QPointerEvent and QEventPoint resemble their Qt Quick
counterparts to such an extent that we can remove those wrappers
and go back to delivering the original events in Qt Quick
- make QEventPoint much smaller than QTouchEvent::TouchPoint, with no pimpl
- remove most public setters
- reduce the usage of complex constructors that take many arguments
- don't repeat ourselves: move accessors and storage upwards
rather than having redundant ones in subclasses
- standardize the set of accessors in QPointerEvent
- maintain source compatibility as much as possible: do not require
modifying event-handling code in any QWidget subclass
To avoid public setters we now introduce a few QMutable* subclasses.
This is a bit like the Builder pattern except that it doesn't involve
constructing a separate disposable object: the main event type can be
cast to the mutable type at any time to enable modifications, iff the
code is linked with gui-private. Therefore event classes can have
less-"complete" constructors, because internal Qt code can use setters
the same way it could use the ones in QTouchEvent before; and the event
classes don't need many friends. Even some read-accessors can be kept
private unless we are sure we want to expose them.
Task-number: QTBUG-46266
Fixes: QTBUG-72173
Change-Id: I740e4e40165b7bc41223d38b200bbc2b403e07b6
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Qt::UNICODE_ACCEL had no effect since at least Qt 4.0. We can drop
it in Qt 6. The whole Qt::Modifier enumeration is still widely
used, so we can't drop it yet, but we should aim at doing so in
Qt 7. Add a note.
[ChangeLog][QtCore][Qt::Modifier] The Qt::UNICODE_ACCEL enumerator
has been removed. It had no effect since Qt 4.0.
[ChangeLog][QtCore][Qt::Modifier] Usage of the enumerators in
the Qt::Modifier enumeration is discouraged. The enumeration
will likely get removed in the next major version of Qt.
Change-Id: If25f30d920878d32903b91a38044f5da042c7eab
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
And generate a few more test projects that were missing.
Change-Id: I5df51106549aa5ae09bc3c42360e14b143719547
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Use pro2cmake with '--api-version 2' to force regenerate
projects to use the new prefixed qt_foo APIs.
Change-Id: I055c4837860319e93aaa6b09d646dda4fc2a4069
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This is in preparation for regenerating them with the new qt_foo
prefixed APIs.
Change-Id: Iff34932d642b1c0186ee39f952adf3ad367fd602
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
There doesn't seem to be any reason users will need to query tablet
devices by their IDs, because every event comes with a complete
instance already, and we have QInputDevice::devices() to list them all.
QPointingDevicePrivate::tabletDevice() can create a new instance if a
matching one is not found (and complains about that); it's intended
for use in QtGui, as a way to find the device if it was not part of the
QWSI event. Now it sets the parent of those auto-created instances
to QCoreApplication to avoid a memory leak.
On the other hand, queryTabletDevice() is intended for use in platform plugins
that need to check whether an instance exists; but they will take care
of creating new instances themselves, and thus have more control over the
parent and the details being stored. Now that the systemId can also be given,
the search is more likely to have a unique result, on window systems
that provide device IDs.
Rename id() to systemId() to clarify that it's a system-specific unique
device ID of some sort, not the same as the uniqueId that a stylus has.
However it seems that in practice, this will often be 0; so clarify that
if it's not unique, QInputDevicePrivate::fromId() and queryTabletDevice()
may not always find the right instance.
Clarify the function usage via comments.
Change-Id: I82bb8d1c26eeaf06f07c290828aa17ec4a31646b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This is required to remove the ; from the macro with Qt 6.
Task-number: QTBUG-82978
Change-Id: I3f0b6717956ca8fa486bed9817b89dfa19f5e0e1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The change creates a slight source incompatibility. The main
things to take care of are
* code using printf statements on list.size(). Using qsizetype in
printf statements will always require a cast to work on both 32
and 64 bit.
* A few places where overloads now get ambiguous. One example is
QRandomGenerator::bounded() that has overloads for int, uint and
double, but not int64.
* Streaming list.size() to a QDataStream will change the format
depending on the architecture.
[ChangeLog][QtCore][QList] QList now uses qsizetype to index into
elements.
Change-Id: Iaff562a4d072b97f458417b670f95971bd47cbc6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When the default format has letter and word spacing set then these
should be exported in the HTML's body tag. This also adds support
for the reading of letter-spacing and word-spacing set too, so that
the same html outputted can be read back in.
Fixes: QTBUG-83718
Change-Id: Ic4afca21eb05efb779dbf99c6b3c13373e851f15
Pick-to: 5.15
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The API is available by including qopenglcontext.h as usual,
but scoped in the QPlatformInterface namespace. The namespace
exposes platform specific type-safe interfaces that provide:
a) Factory functions for adopting native contexts, e.g.
QCocoaGLContext::fromNative(nsContext, shareContext);
b) Access to underlying native handles, e.g.
openGLContext->platformInterface<QCocoaGLContext>->nativeContext()
c) Platform specific functionality, e.g.
static QWGLContext::openGLModuleHandle()
openGLContext->platformInterface<QEGLContext>->doSomething();
The platform interfaces live close to the classes they extend,
removing the need for complex indirection and plumbing, and
avoids kitchen-sink modules and APIs such as the extras modules,
QPlatformFunctions, or QPlatformNativeInterface.
In the case of QOpenGLContext these platform APIs are backed
by the platform plugin, so dynamic_cast is used to ensure the
platform plugin supports the requested interface, but this is
and implementation detail. The interface APIs are agnostic
to where the implementation lives, while still being available
to the user as part of the APIs they extend/augment.
The documentation will be restored when the dust settles.
Task-number: QTBUG-80233
Change-Id: Iac612403383991c4b24064332542a6e4bcbb3293
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Skip crashing tests and ignore failing tests on CMake platforms.
Add missing QTEST_ENVIRONMENT=ci env var assignment to Coin test
instructions. This was hardcoded by the Coin code for qmake
configurations.
Task-number: QTBUG-85364
Change-Id: Id2312e504a0d36b8f8596d4cebaa49c63731406e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The platform plugins are implemented to grab the entire screen if
no window ID is provided. They do not grab the entire virtual
screen, just the screen the method is called on.
On macOS, the implementation ignored the window parameter, and
always grabbed the entire virtual screen. This change fixes the
cocoa implementation. The test passes in local tests (with two
displays with different dpr). Since grabbing a screen returns an
image with managed colors, we need to convert it to sRGB color
spec first, otherwise displaying a grabbed image will produce
different results. This will need to be changed once Qt supports
a fully color managed flow.
The test does not cover the case where a window spans multiple
displays, since this is generally not supported at least on macOS.
The code that exists in QCocoaScreen to handle that case is
untested, but with the exception of the optimization it is also
unchanged.
Done-with: Morten Sørvig <morten.sorvig@qt.io>
Change-Id: I8ac1233e56d559230ff9e10111abfb6227431e8c
Fixes: QTBUG-84876
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Required by OpenXR. A VkPhysicalDevice or an adapter LUID + feature
level pair should be adoptable while leaving the rest (device, queue,
etc. setup) to QRhi as normal.
Change-Id: Iada0972671b037b4efb03e7831b7c9b8c5f2393d
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
[ChangeLog][QtCore][QByteArray] Remove method overloads taking
QString as argument, all of which were equivalent to passing the
toUtf8() of the string instead.
Change-Id: I9251733a9b3711153b2faddbbc907672a7cba190
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The idea was to keep nagging us to update all the platform plugins to
do device registration. But besides being annoying, it would cause
test failures if we start adding QTest::ignoreMessage() all over,
and then some platforms start doing device registration properly.
Change-Id: Ia0fbb64cf86f33532be032ec9eebe6e4ad607f20
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
There is no reason for keep using our macro now that we have C++17.
The macro itself is left in for the moment being, as well as its
detection logic, because it's needed for C code (not everything
supports C11 yet). A few more cleanups will arrive in the next few
patches.
Note that this is a mere search/replace; some places were using
double braces to work around the presence of commas in a macro, no
attempt has been done to fix those.
tst_qglobal had just some minor changes to keep testing the macro.
Change-Id: I1c1c397d9f3e63db3338842bf350c9069ea57639
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This was causing some bogus failures in Qt Quick autotests.
Existing APIs like QQuickWindow::mouseGrabberItem() are not really
compatible with the idea of a mouse-less system; but perhaps we can
revisit this later.
Task-number: QTBUG-85114
Change-Id: Id1c2e5894e5cf13a79998aaea28d5f42fad920cf
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
We want every QInputEvent to carry a valid device pointer. It may be
some time until all QPA plugins are sending it, but it's necessary to
provide the functions for them to start doing that.
We now try to maintain the same order of arguments to all the functions.
handleTouchEvent(window, timestamp, device, the rest) was already there
(except "device" has changed type now), and is used in a lot of platform
plugins; so it seems easiest to let that set the precedent, and modify
the rest to match. We do that by adding new functions; we can deprecate
the older functions after it becomes clear that the new ones work well.
However the handleGestureEvent functions have only ever been used in
the cocoa plugin, so it's easy to change their argument order right now.
Modify tst_qwindow::tabletEvents() to test new tablet event API.
Task-number: QTBUG-46412
Change-Id: I1828b61183cf51f3a08774936156c6a91cfc9a12
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
...starting with a new feature: registering different devices at
different seats and verifying their capabilities and that we can get
them back again.
Change-Id: I8e58a49080633753d02a76e5fdc4932f5c674e0a
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
We have seen during the Qt 5 series that QMouseEvent::source() does
not provide enough information: if it is synthesized, it could have
come from any device for which mouse events are synthesized, not only
from a touchscreen. By providing in every QInputEvent as complete
information about the actual source device as possible, we will enable
very fine-tuned behavior in the object that handles each event.
Further, we would like to support multiple keyboards, pointing devices,
and named groups of devices that are known as "seats" in Wayland.
In Qt 5, QPA plugins registered each touchscreen as it was discovered.
Now we extend this pattern to all input devices. This new requirement
can be implemented gradually; for now, if a QTWSI input event is
received wtihout a device pointer, a default "core" device will be
created on-the-fly, and a warning emitted.
In Qt 5, QTouchEvent::TouchPoint::id() was forced to be unique even when
multiple devices were in use simultaneously. Now that each event
identifies the device it came from, this hack is no longer needed.
A stub of the new QPointerEvent is added; it will be developed further
in subsequent patches.
[ChangeLog][QtGui][QInputEvent] Every QInputEvent now carries a pointer
to an instance of QInputDevice, or the subclass QPointingDevice in case
of mouse, touch and tablet events. Each platform plugin is expected to
create the device instances, register them, and provide valid pointers
with all input events. If this is not done, warnings are emitted and
default devices are created as necessary. When the device has accurate
information, it provides the opportunity to fine-tune behavior depending
on device type and capabilities: for example if a QMouseEvent is
synthesized from a touchscreen, the recipient can see which touchscreen
it came from. Each device also has a seatName to distinguish users on
multi-user windowing systems. Touchpoint IDs are no longer unique on
their own, but the combination of ID and device is.
Fixes: QTBUG-46412
Fixes: QTBUG-72167
Task-number: QTBUG-69433
Task-number: QTBUG-52430
Change-Id: I933fb2b86182efa722037b7a33e404c5daf5292a
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The Vulkan spec changed the behavior for VkApplicationInfo::apiVersion
in 1.1, conveniently breaking compatibility with all existing 1.0 logic.
We can no longer assume that the 1.0 behavior, which was failing instance
creation with VK_ERROR_INCOMPATIBLE_DRIVER for an unsupported version,
is always in place. So do not rely on this in the test, and add a
reminder in QVulkanInstance docs as well.
Fixes: QTBUG-85040
Change-Id: I8f5c7a7830877b72d106c444aebfaea191083ee0
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
Amends 32b586864e, which added an override
of QStandardItemModel::roleNames(). It's good for it to have its own
QHash so that roles can be added, and because
QStandardItemModel::setItemRoleNames() remains un-deprecated; but before
that change, they were the roles that QAbstractItemModel had initialized
from QAbstractItemModelPrivate::defaultRoleNames(). In particular, we
need "display" to map to Qt::DisplayRole by default; several tests in
qtdeclarative depend on that.
Change-Id: I58b2d6aa6b6c78b1d618335ddc4ecb834af57274
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Remove QDestopWidget public header, simplify the implementation that
maintains a Qt::Desktop type QWidget for each QScreen, and turn
QWidget's initial target screen into a QScreen pointer.
QApplication::desktop() now takes an optional QScreen pointer, and
returns a QWidget pointer, so that applications and widgets can get
access to the root widget for a specific screen without having to
resort to private APIs.
QDesktopWidgetPrivate implementations to look up a screen for an index,
widget, or point are now all inline functions that thinly wrap
QGuiApplication::screens/screenAt calls. We should consider adding those
as convenience APIs to QScreen instead.
Note that QWidget::screen is assumed to return a valid pointer; there is
code that handles the case that it returns nullptr (but also code that
trusts that it never is nullptr), so this needs to be defined, verified
with tests, and asserted. We can then simplify the code further.
Change-Id: Ifc89be65a0dce265b6729feaf54121c35137cb94
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Many of these were generated by clazy using the new qevent-accessors check.
Change-Id: Ie17af17f50fdc9f47d7859d267c14568cc350fd0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The default font on Windows 10 (Segoe UI) will return the
wrong minimum right bearing at some sizes, which will cause
us to skip the textWidthVsWIdth() test at some scale factors,
since we cannot trust the layout to be perfect in this case.
Based on experiment, Arial is more accurate, so in order to
avoid skipping the test, we default to this on Windows instead.
(Note: The problem has not been observed with the default fonts
on Linux or macOS, so we only do this for Windows specifically.)
Task-number: QTBUG-84415
Pick-to: 5.15
Change-Id: I8cdb5d0d9922915a6ed1574d62a561dda0e1dc5d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
There are some slight differences between normal drawText()
and QGlyphRuns/QStaticText for decoration widths in certain
fonts. We decided to accept this and tried working around it
in the test by using ForceIntegerMetrics (since the difference
is < 0.5 pixel). This enum has been deprecated, so we move
the tests into Lancelot instead, since the idea here is to
test for regressions, not to compare the two painter commands.
Note that there is something off about decorations with
drawGlyphRuns() and drawStaticText() which is exposed
(not caused) by this, perhaps related to using a matrix
for positioning, since that was untested before.
This also takes the liberty of moving the emoji test string
from text.qps, since this was not in the statictext.qps yet.
Change-Id: Ib2d697095cbd11829cdd50b3c0268c85e9607c78
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Macros and the await helper function from qfunctions_winrt(_p).h are
needed in other Qt modules which use UWP APIs on desktop windows.
Task-number: QTBUG-84434
Change-Id: Ice09c11436ad151c17bdccd2c7defadd08c13925
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
We don't want to have untested qtbase.
This reverts commit 3598ffcc26.
This change also skips two network tests on b2qt.
Change-Id: I5c6f5e19487775f0a1c0feafa5e085208cbf7e9a
Reviewed-by: Liang Qi <liang.qi@qt.io>
The helper processes were not in the correct location.
Change-Id: I0a80a22a931625ea0c9370db38ff29c881b964cb
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Since the variable names in QShaderDescription are later compared to
QByteArrays we can gain some performance from not having to convert them
to QByteArrays later.
Task-Id: QTBUG-83706
Change-Id: Iaf80d0966f45cbb09e7c1000b7854bc488e57bb3
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Windows unexpectedly passes PM_NOYIELD flag in wParam parameter to the
hook procedure, if ::PeekMessage(..., PM_REMOVE | PM_NOYIELD) is called
from the event loop. So, to ignore undocumented flag, we should
interpret wParam as a bit field.
Thanks to Robin Lobel for research.
Pick-to: 5.15
Fixes: QTBUG-84562
Change-Id: Ib16d7d747aebc9a3628e4ee67478c4d3edeb96f1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Some fonts misreport the minimum right bearing, and in those cases
we may not be able to do a perfect text layout inside the bounds
set. This is a limitation we have chosen to accept.
To avoid random failure when testing this, we detect the case and
skip the test if we see that it may fail.
Fixes: QTBUG-84415
Pick-to: 5.15
Change-Id: I6b53ea2631c5c6e476e2902b5514829a2141796f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
ExtendedRgb should be treated as Rgb as it can be an automatic upgrade.
Pick-to: 5.15
Change-Id: I2942a1067ed5cacb2f60f303f467887cb44c36dd
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
For historical reasons we use build and release instead of create and
destroy. This becomes confusing now that more modules in Qt start taking
QRhi into use. Migrate to the more familiar naming, so those who have
used QWindow or QOpenGLContext before will find it natural.
Change-Id: I05eb2243ce274c59b03a5f8bcbb2792a4f37120f
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
The bold+italic combination indicated by ***triple stars*** requires
this; but it enables combinations of italics, bold, strikeout, anchor
text (and associated link formatting), image alternate text, and inline
code formatting (monospace). A code span overrides the formatting from
surrounding spans (which might be a bug to fix in another patch, if we
compare to how md2html formats code nested in bold-italics for example),
but the format stack restores state when any char format span ends.
Task-number: QTBUG-81306
Pick-to: 5.15
Change-Id: I289556fa53de400eb50a4d159b9b344eafc517da
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
