Instead of 'true', it should be '-1'.
Change-Id: I5e8f99153da68d34b37477ef4cedbc447fba347f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
According to QLocalSocket's documentation, connectToServer() must
initiate a connection attempt after opening the device. Otherwise, if
a connection succeeds immediately, connected() signal will be emitted
on closed device. So, this patch ensures that TCP-based implementation
behaves correctly.
Change-Id: I4cc9474815e091a1491a429a6dc17f9cf0154f58
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
While connecting, the socket goes through the HostLookupState. In
this state, the socket engine is not yet created, unless the socket
had previously been bound. When it has been bound, we should keep
the socket engine even if the user initiates a delayed close by
using the write()+close() sequence.
Change-Id: Iefebcb33cd72cb49617acbac8e02af9d8209c869
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Otherwise socketDescriptor(), localPort(), localAddress(), peerPort(),
peerAddress(), and peerName() remain uncleared until close() is called.
This could take place when the connection is closed by the remote
endpoint or the user calls disconnectFromHost(). After disconnecting,
connection parameters are no longer valid, while I/O device is still
opened and may have pending data for reading. Usually, the user reads
all incoming data and closes the device independently.
Change-Id: Ic898851c39137faf64019949910f0d94ebb79df7
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
And blacklisted a few tests in tst_QUdpSocket.
Conflicts:
src/android/jar/src/org/qtproject/qt5/android/QtNative.java
src/corelib/global/qglobal.cpp
src/corelib/global/qsystemdetection.h
src/corelib/io/qfileselector.cpp
src/plugins/platforms/eglfs/deviceintegration/eglfs_kms_egldevice/qeglfskmsegldeviceintegration.cpp
tests/auto/network/socket/qudpsocket/BLACKLIST
Task-number: QTBUG-54205
Change-Id: I11dd1c90186eb1b847d45be87a26041f61d89ef6
This is the second attempt to remove 'insignificant' from UDP socket test to:
- make changes ending up in regressions more difficult (hopefully impossible) to merge
- switch to BLACKLIST if needed
- make flaky tests more visible.
For now this 'back to significant' will be accompanied by extended BLACKLIST.
New in BLACKLIST:
* OS X - datagram size-related problems (fixed in 5.7)
* OS X - multicastLeaveAfterClose - will probably stay BLACKLISTED,
seems to be a Darwin's quirk, can be fixed in OS X >= 10.10.
* windows ...
tst_QUdpSocket::echo seems to fail randomly on OS X/linux and
it looks like it fails at the same time on different machines,
should be something server-related (a guess only).
Change-Id: Ib344348ffab03fab1b9309b80449a04d8ce247c6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This reverts commit 11ad50074b.
Unfortunately, udpsocket strikes back this time on OS X < 10.10 -
never seens these test failing before. Since this prevents 5.6->5.7
merge, I have to revert it until the problem investigated/fixed on OS X.
Alas :(
Change-Id: I52f6512d88c25d2e3071cb845e91faefbd455e27
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
BLACKLIST should make it, recent regression in QUdpSocket went unnoticed
(first) because of 'insignificant'. We'd like to avoid such regressions
in future (again, using BLACKLIST if needed and fixig the real problem then).
NB: BLACKLIST in this patch was extended to deal with previously unnoticed failures on
Windows and OS X. 'multicast' and related family of of functions on OS X
will probably stay like this (seems to be a Darwin's quirk), datagram
size related tests - fixed in dev or 5.7 (change is in nativesocket engine,
'bytesAvailable').
Task-number: QTBUG-52714
Change-Id: I039b05935a02983ce1648de449907dfa765f7db7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Add more error messages on failures.
Task-number: QTBUG-25367
Task-number: QTBUG-25368
Change-Id: I064143a058b7b98d9d5eecab8b5da49f5307e1eb
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
QWindowsPipeWriter uses asynchronous API to perform writing. Once a cycle
has been started, the write buffer must remain valid until the write
operation is completed.
To avoid data corruption and possibly undefined behavior, this patch
makes QWindowsPipeWriter::write() take a QByteArray, which it keeps alive
for the duration of the write cycle.
Autotest-by: Thomas Hartmann
Task-number: QTBUG-52401
Change-Id: Ia35faee735c4e684267daa1f6bd689512b670cd2
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Suppress message dialog of the test helper as does QTestlib.
Task-number: QTBUG-52714
Change-Id: I5efd7d72f77c7689500ecaccf46f1f9dfb312140
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Use QFINDTESTDATA to find the socketprocess helper executable.
Now tst_QLocalSocket::processConnection() passes when started from Qt
Creator without adjusting the working directory.
Change-Id: I97ca3334a381b3cd646647487529bcd90b969528
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QWindowsPipeWriter doesn't write in a separate thread
anymore.
Change-Id: Id978bfdfa2531be91cce94476ab9b0dff237bd61
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Commit 0307c008 removed the buffering of data-to-be-written from
QWindowsPipeWriter, because it was assumed that users of this class
(QProcess and QLocalSocket) already buffer data internally.
This assumption was wrong for QLocalSocket. The following sequence
localSocket->write(someData);
localSocket->write(someMoreData);
would not write anything on the second write.
Add a write buffer to the Windows implementation of QLocalSocket.
Task-number: QTBUG-52073
Change-Id: I6d0f03a722ec48138cbde3e2f69aae7dafe790d3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
canReadNotification() could return 'false' if either the socket has
been closed, or the read buffer has reached the maximum size. Because of
this duality, waitForBytesWritten() should not fail as a result of a
canReadNotification() call.
Change-Id: I9a15fa174a3b982a7ce404913caa38fc19f64622
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Markus Goetz (Woboq GmbH) <markus@woboq.com>
This change partially reverts 1bfc7f68 about QT_HAS_BUILTIN define
and undef in src/corelib/tools/qsimd_p.h.
This change is also squashed with "Fall back to c++11 standard
compiler flag for host builds" which is done by Peter Seiderer.
Conflicts:
mkspecs/features/default_post.prf
src/3rdparty/sqlite/0001-Fixing-the-SQLite3-build-for-WEC2013-again.patch
src/3rdparty/sqlite/sqlite3.c
src/corelib/tools/qsimd_p.h
src/gui/kernel/qevent.cpp
src/gui/kernel/qwindowsysteminterface.cpp
src/gui/kernel/qwindowsysteminterface_p.h
src/plugins/bearer/blackberry/blackberry.pro
src/plugins/platforms/cocoa/qcocoasystemsettings.mm
src/plugins/platformthemes/gtk2/gtk2.pro
src/plugins/styles/bb10style/bb10style.pro
src/sql/drivers/sqlite2/qsql_sqlite2.cpp
tools/configure/configureapp.cpp
Task-number: QTBUG-51644
Done-with: Peter Seiderer <ps.report@gmx.net>
Change-Id: I6100d6ace31b2e8d41a95f0b5d5ebf8f1fd88b44
Suppose a client connects while the QLocalServer is still in the loop
that calls addListener. The connection would SetEvent(eventHandle),
but every call to ConnectNamedPipe would ResetEvent(eventHandle).
Thus, the connection is never detected by the notifier on eventHandle.
Callers of addListener must check the connection state of every
listener to make sure that no client connected while setting up
listeners.
Task-number: QTBUG-49254
Change-Id: Ia961927ea76973708e6e3f73510695eb5d6a0e4c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
In one code path the test checked for the emission of a readyRead()
signal without waiting for it.
This code path was never hit, neither on Windows nor on Unix platforms.
Change-Id: Ifbe464400a2a1ba8eab49bd60315289040e6bbde
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The data function for this test re-used listenAndConnect_data that
has an additional column "connections" which was never used in sendData.
Thus sendData executed three times the same code which is just uselessly
burned CI time.
Copied the actually needed code of listenAndConnect_data to sendData_data.
Change-Id: I6cdb1c1b72cb4ce7be7c13e90eea30ac09a14914
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
I wrote a script to help find the files, but I reviewed the
contributions manually to be sure I wasn't claiming copyright for search
& replace, adding Q_DECL_NOTHROW or adding "We mean it" headers.
Change-Id: I7a9e11d7b64a4cc78e24ffff142b506368fc8842
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
When the remote peer closed the connection, a read notification needs
to always be emitted, otherwise the higher layer does not get the
disconnected signal. From the other side, underlying QAbstractSocket
object could temporarily disable notifications from the engine at
any time. To avoid possible blocking of the socket, take a pending EOF
into account when the read notifications are re-enabled.
Change-Id: Iac9d4e2f790530be3500baf5a2000f1f63df5cc2
Reviewed-by: Ulf Hermann <ulf.hermann@theqtcompany.com>
In bind+connect scenario, rejected connection can trigger a read
notification while the socket is opened. But unlike UDP, reading from
the socket engine or emitting a readyRead() signal is not allowed for
the TCP socket in bound or connecting state.
To make a bind+connect scenario work properly, disable the read
notifications until a connection is established.
Task-number: QTBUG-50124
Change-Id: I7b3d015b0f6021fb9ff9f83560478aa5545f41f5
Reviewed-by: Richard J. Moore <rich@kde.org>
Move some code (like registrations of meta types) from init() to
initTestCase() in the process.
Change-Id: I57db5156647cfadab554fbed853b2e68b2815f3b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Introduce QVERIFY2() to get some information when exactly it fails.
Change-Id: Icaddf2ecae434d0bafc90c18458c5ee067dfd506
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
After canceling the asynchronous read operation, the
notified() slot receives ERROR_OPERATION_ABORTED.
We must not handle this situation as an error.
This amends commit 5ce567c5.
Task-number: QTBUG-48336
Change-Id: Iff948ceb3ad1f805a9de8c188fbc39ed4c76ba82
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Different multicast tests fail on different platforms for different reasons.
Blacklist them to get rid of insignificant and later fix/un-blacklist.
Change-Id: I91548366c7666478ea1cc446bbf337becfdefd49
Task-number: QTBUG-46612
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
Use QByteArray/QString addition instead in loops and for
test row names.
Change-Id: I7974ace5b34f2da43e7511044e80de1e733245ac
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Prefer QCOMPARE over QVERIFY for equality and use QLatin1String().
Change-Id: If226a0fc7b25be3e6774c7e36ca1e6f99234e5dd
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Use character literals where applicable.
Change-Id: I1a026c320079ee5ca6f70be835d5a541deee2dd1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
After calling connectToHost(), the socket enters HostLookup state. At this
stage, the socket engine was not created yet, and writing to the socket
should result in either data buffering or an error. So, add a check for
d->socketEngine to prevent a crash on unbuffered sockets.
Task-number: QTBUG-48356
Change-Id: I15ea9ce7de97ce6d7e13e358eca5350745b556bb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
