Serializing an empty object path was crashing with
> arguments to dbus_message_iter_append_basic() were incorrect,
> assertion "_dbus_check_is_valid_path (*string_p)" failed in file
> dbus-message.c line 2555.
Thiago says this depends on the libdbus build settings, which is why
it didn't happen to everyone. OpenSUSE-12.1 here.
Change-Id: I657d28d5d915706a22abfd273aad88d20e2d112a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When writeDatagram is called without first binding the UDP socket,
then bind it as QHostAddress::Any.
This allows the same socket to be used to sent to both IPv4 and
IPv6 destination addresses.
Allowing the OS to autobind the socket inside sendTo() may
result in a single protocol socket.
Task-number: QTBUG-5275
Change-Id: I2b76507e8a8a38369c6eafb61ce4191d1d6cc930
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
It was only implemented on Mac OSX until now (all this came from the
QDesktopServices code).
Change-Id: I7fd81d80ca77cf0ca6c213f59813a6163abe7dc5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The code was only allocating memory for the next insertion
leading to a reallocation of the whole data for every
single insertion.
The code now reserves some space and uses a decent growth
strategy to avoid repeated reallocs.
Change-Id: I48b0feab71ba8ca73e7037f8460080f198b2f009
Reviewed-by: Jamey Hicks <jamey.hicks@nokia.com>
config.tests/unix/freetype.pri has a !cross_compile flag, so we must
find freetype using the proper detection methods. The detection was
inside an X11 section of configure, so move that out.
And use the results of that detection, now that QMAKE_CFLAGS_X11 isn't
used (since we're not building X11 in QtPlatformSupport).
Change-Id: Ic8f5cfb7263849bfb12967756def2b5aaa244872
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The bsymbolic_functions test was missing $SYSROOT_FLAG, so the linking
was always failing and the test falsely negative.
Also make the error reporting better: if the flag was requested, error
out if the check fails and report more information in -v mode.
Change-Id: Ie2615f8083e7e58d63d9ee9c23be937dc864b30d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Include linux.conf instead of unix.conf, so it can compile Qt Base
these days (otherwise, we get an error from wayland-scanner.prf).
Remove the outdated information from the header. The mkspec now
matches ICC 12, not 10 and there are more diagnostics we disable.
Change-Id: Ic75593759a4d53f859a9a9e919d77b5c52d01024
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Refactor from polling in an endless loop running in a separate thread
to using a QSocketNotifier working on the main thread.
Similar to "de-threading" of the navigator event handling in
9dc86ac0f2
Change-Id: I994dceed07312a3846737c8bea34cffa4ab408f1
Reviewed-by: Sean Harmer <sh@theharmers.co.uk>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Manual merge of the original fix 1ef309e9 in the Qt 4.8 repo.
Task-number: QTBUG-20480
Change-Id: Id08500c2dd16965af3942e65cff1f4afa24180b0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
General changes:
const, scope, braces, hash[] for clarity, comment wording and
spelling.
QSqlRelationalTableModel::selectStatement() readability:
Renamed private method.
QVector<Class>.value() already defaults to null object value, so there
is no point in handling this case explicitly.
Alias rec for d->rec added more noise than clarity.
Using "tables" list only adds an extra step. Simple concatenation does
the trick.
Deduplicate code for building table expression and JOIN condition.
Change-Id: Ia52afaf3c3937a26595d5ae867982664002562d8
Reviewed-by: Honglei Zhang <honglei.zhang@nokia.com>
Deprecate the old API for now as not to break existing usages.
Change-Id: I7abbbbe8a34951282537a9d74cded03743f44df7
Reviewed-by: Pekka Vuorela <pekka.ta.vuorela@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Focus change happen as: FocusAboutToChange event -> focus change
-> FocusOut event -> FocusIn event.
Input method need to have focus when calling commit(). Notification
on focus about to be lost allows QWindow implementations to commit in
time.
Also changes QWidget documentation to match code reality.
Change-Id: I17a8a374a33dd700909f79e370b42348869261a6
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
EGLFS and QNX both reference this symbol, hence it needs to be exported
Change-Id: I11b2b8ad5f2b81d951173f7cd8a7fbb8be4bb89b
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
The parser makes the default language en_US, and no mimetype xml says
<comment xml:lang="C">, so use the en_US string for the C locale,
rather than returning an empty string.
Change-Id: Iad7c142e8078abe357773249416e7ce9b3e29a92
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
ApplicationsLocation and DataLocation were returning only the local path,
rather than system paths + local path.
Change-Id: I653d14e5bbe1e08c5fa1ecd5a6106336d1cd0369
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Otherwise, it crashes if you simply set the same proxy factory instance
twice.
Change-Id: I4b1f1d0eed7630c9a145c0a330c6be1b3fc381e5
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
Make sure that if ShowAlphaChannel option is set then also setShowsAlpha
needs to be set for the panel before setting the current color, otherwise
alpha channel value is omitted.
Task-number: QTBUG-24320
Change-Id: Ifb3822711af8ffd0cf6cb4c8aab2b0020d296663
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
According to new module name convention, QtXmlPatterns is
replaced with Qt XML Patterns in all documentation.
Task-number: QTBUG-24775
Change-Id: I9ca85728e266bd1ca9fa7a14e5e68c43c8d3e826
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
Only swap width/height of initial geometry if orthogonal to initial
rotation not orthogonal to current rotation
Change-Id: I825954e98dee6c0d07a284307dfb8e1f9fd538e6
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Sean Harmer <sh@theharmers.co.uk>
Display the actual file and line where the Q_ASSERT statement
was triggered.
Change-Id: I54d72f4c4bd9edee744c0f6e08f31b8e3120f454
Reviewed-by: David Faure <faure@kde.org>
\since 5.0 has been add to the class section, so member functions and
properties donot need this any more.
see SHA: 5728c8a8e7
Change-Id: I4e67461373dda99ee1fbfdeb6477fde1dcfec116
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
- Fixed path was failing to find sub program.
Change-Id: I86f1a6941e244c9bc25ad0441cc7a441607560b7
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Changed installTestHelperApp() to use OUT_PWD path to find files.
(was looking in source tree instead of build)
Change-Id: If795c17a76aebcfbbe0d4f84c5df784a255ddb19
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Added toByteArray() and fromByteArray() benchmark tests.
Performance tests to measure QVariantMap to bytearray
and bytearray to QVariantMap.
Use case: Interprocess communications via local socket
Change-Id: If5e94ff870890b2ebb665f3cc38f5c33b34547f4
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
-updated both QDoc manual and QDoc guide
-"QML element" and "QML component" should be "QML type"
Change-Id: Ib2a0e8baa9087a04d35c05bbbd35852da10faf42
Reviewed-by: Martin Smith <martin.smith@nokia.com>
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
The .pageindex file was generated for the search engine on the
doc.qt.nokia.com website, since this website is not used anymore there
is no use for the .pageindex file.
Task-number: QTBUG-24911
Change-Id: Ie74f569ce881ab383d83ac9c5a8bc223da91564a
Reviewed-by: Martin Smith <martin.smith@nokia.com>
Removes the need for an extra thread by creating the event handler's
socket notifier in the context of the main thread.
Change-Id: If8c7bb986074083b5b9a7b9c96734a970ba32f92
Reviewed-by: Sean Harmer <sh@theharmers.co.uk>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
The define is removed and only adds includes.
Change-Id: Id6cc32aa22536f78bb5de10cb779a3168e79441a
Reviewed-by: Gabriel de Dietrich <gabriel.dietrich-de@nokia.com>
Calling QInputMethod::invokeAction() was not checking for proper event
type and was requiring context widget unnecessarily.
Fixes some parts of QTBUG-24035
Change-Id: I51fe9ed02a018ced36319eb672a088503649b275
Reviewed-by: Andrew den Exter <andrew.den-exter@nokia.com>
This causes all sorts of problems, but is also blocking the introduction of new,
more detailed signals, because the backend never correctly identified the removal.
The object handle appears to be woken up before the directory is actually
deleted, thus causing QFileInfo::exists() to return true, and not doing the
removal dance. This behaviour isn't exactly documented (as far as I was able to
find out), but also seems to happen consistently, and Chromium also contains
a comment noting a similar issue.
Task-number: QTBUG-2331
Change-Id: Icfb6219b78e688852d7863a666a0ffc31bb4d573
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
The warnings about "Internal mouse button tracking invalid" should check
for the correct button before emitting a warning. The warning should
also mention the correct button as well. For otherMouseDragged, we
simply check for any button that's not the left or right button.
Change-Id: I9eb6d6bd7fb5919e745b7f8eb517b4bc9efd36a6
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Make Qt window activation follow the Cocoa key
window, with one exception: Popup windows become
the key window but not the Qt active window.
Change-Id: Ic4d8685737fa3ec5c15a68b81844929370c9cd8e
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
-QDoc output should use "type", not "element".
"This type was introduced..."
Change-Id: I72b6ba6318889d7727796b80574b72694f2b7594
Reviewed-by: Martin Smith <martin.smith@nokia.com>
this allows expressing "no SettingsPath" cleanly, and makes the
internals cleaner.
this is marginally behavior-incompatible in that if somebody had Prefix
or Data set to an empty string (rather than a dot, which is hinted at by
the documentation and commanded by common sense), he would have gotten
the binary's directory resp. Prefix, while now it will be just empty.
Change-Id: I3c11cc4e8671ffb604d4889389764a9ba9c2e7e6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
QFont::defaultFamily() should not use any hardcoded font names like
"Helvetica" or "Times" as they might not be present in certain systems,
it should rather use abstract names like "sans-serif", "serif" and
"monospace" then let the platform plugin to decide which font map to
them.
Change-Id: I5aafb103a5238c17b10773711ad504806c6fc3ce
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
As usual the y coordinate needs to be inverted.
Change-Id: Iac9b48f9bdb475a3d5a76b930c2e138a625f1ef8
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
The QPalette::Inactive text color should be the same as
kThemeTextColorDialogActive. kThemeTextColorDialogInactive is for
disabled widgets/windows.
Change-Id: I55eb63fff213cb9870a991455cbc3254b9d1538e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
The contextInfo passed to printPanelDidEnd should be a QPrintDialog*,
not a QPrintDialogPrivate*.
Change-Id: I8f9aae2f27b483b4669f9d39cdafd0ddeb37fd22
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
With the move to the QPA architecture EGL is now only required by
individual platform plugins and the configure script has been adjusted to
reflect this.
Change-Id: Ieadacef0b970f29752d9e3e36a007e5cbb005b0d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
egl.h on certain platforms directly includes X11 headers, resulting in an
all too familiar header conflict. There are existing defines we merely need
to set in order to avoid this eventuality.
Change-Id: Ic91b66286ad6cc329f9c88b5e47834690a8eb96a
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
This is the equivalent of 821fc4cf4e520a74b8d4c834f2fb46e4e2f27001
from qt4 but done differently because qt5 has egl.prf.
Change-Id: I52114239bdeda6c300db04a7859cae52aa9e9b41
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
