QMAKE_LIBDIR and QMAKE_FRAMEWORKPATH have the downside that they
always effectively end up in LIBS, which makes for weird prl files.
Change-Id: Iaf61b0038504ff91ae5ec7f9b1255fe3a2d134f1
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
this saves some repeated calculations. also, it's nicer to have most
logic in one place.
Change-Id: Iea362d40f5e6203709ced94d29ca61a4163b8e69
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the variable name is a function parameter now
Change-Id: I46f3ce37c157312e7f70291a0cef2d666d50664c
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
When incredibuild-xge had been turned on by configure then it was not
ensuring that the generated vcproj files had the right extra comments
needed to make incredibuild run moc and other tools in parallel. By
fixing the prf file to get around a problem in the parser this is now
respected.
Task-number: QTBUG-14482
Change-Id: Ifd24bde2db7d80d3a52719c733d15f228c7b3534
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Hard float enabled Raspbian image is now primary platform provided by the
Raspberry Pi foundation.
Change-Id: I2d59ad26fac459907b4f51764975a3e6e29c6033
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Thomas Senyk <thomas.senyk@pelagicore.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
They had no effect anyways due to the check in the embed_manifest*.prf
files.
Change-Id: I3cd145030876d91948794d376a18a47e297f3b3a
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
this is more logical, following the qt_plugin and qt_tool scheme.
Change-Id: Ib3b2abec6728cdab260e15128b1cd78e8e6f5d6a
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this makes it comfortable to create qml-only modules
Change-Id: I17a5a3ee24210b93db05e50502c6ca91a4e7a9d8
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
when doing a non-prefix build (which is the only case where the code is
executed), the build location is always the same anyway, so there is no
use in complicating things.
Change-Id: Id98755d818e05a11bed505abcb8b9d52a7d5b7c4
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
non-installed -prefix builds can't do anything useful with qml plugin
files anyway, so don't waste time on copying them.
Change-Id: I23f4b8f67402a85d3c6e741a04f88567655c1655
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
load(resolve_target) must not be called before we have a final target
name.
Change-Id: Ia7418672b0c7b7fbd388a63819af9ea9a54c5241
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Microsoft has named their new Visual Studio again
after the old naming schema.
Change-Id: Ib1b971807fa89d90b10892a2d78570058e564f3a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Nicolas Arnaud-Cormos <nicolas@kdab.com>
this does the same as PKGCONFIG, only that the libraries end up in
LIBS_PRIVATE, not LIBS, which means they don't end up in prl files.
in the vast majority of cases, the user should use this new variable.
Change-Id: Icb57a1166f1896f51284c64e4047cfc79410e73a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
this is handled the same way as the QT variable, only that the actual
libraries end up in LIBS_PRIVATE, not LIBS, which means they don't end up
in prl files.
the handling of the two variables is entirely independent, including
independent dependency resolution, so some libraries will typically end
up twice on the linker command line. this is not a problem.
Change-Id: I257ad0d414bf273c08a7bd6a874fe9ddb7356009
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
this is in fact a shell-related flag, which determines how QMAKE_DIR_COPY
is assumed to behave.
Change-Id: If774f8a83b40c9ae7107c8e7ef7263af8a2e6c6e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
QT_PRIVATE is meant to be for something different.
only jsondb uses that so far. as it has little activity, i feel free to
break it temporarily.
Change-Id: Ifaa054af7234594ee534120c99506b76aebbf59f
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
QDBUSXML2CPP_{INTERFACES,ADAPTORS}_{HEADER,SOURCE}_FLAGS are now
understood.
Change-Id: I26492cec5ecb7ff4a6b83755ee8a0c17859b2a68
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
it's two times the same code, once with "adaptor" (and an -a option) and
once with "interface" (and a -p option).
the de-duplicated code looks a bit nasty, as qmake cannot deal with
braces on the LHS yet.
Change-Id: I199a07947661ab9abe7a736b56c437f3f6dc4fa4
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
So you can get AVX/NEON etc source compiled by assigning to the
corresponding variable (e.g. AVX_SOURCES).
This was previously used in just the gui module, but other
external modules might like it too.
Change-Id: I51aa64760c469c7dc4c71e6f089c2ddef4f509c5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
the system path separator and shell are bound to the host system
(system() will use cmd even on mingw with sh.exe in path).
the makefiles otoh may depend on what the qmakespec defines.
consequently, add $$system_path() and $$system_quote() (for use with
system() & $$system()). $$native_path() is renamed to $$shell_path() and
should be used with $$shell_quote() to produce command lines in
makefiles.
$$QMAKE_DIR_SEP needs to be applied to Option::dir_sep right after
parsing the spec, so it is available to $$shell_{path,quote}().
Change-Id: If3db4849e7f96068cf03a32348a24f3a72d6292c
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
It is expected to be well defined for the CMake files to be generated
correctly, but if that stops being the case, it should fail loudly. All
of the generated CMake packages are CI tested.
Change-Id: I67c7fa6ef1fe0a019c40936cb12db282669e9ee8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
It does not make a big difference, but it is what was intended
initially.
Change-Id: Idd7e06c857533030b000726ff87b48bb2619df06
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This includes a revert of 195df6e8e0
so that the solution scales better to other Qt modules, and other
logic related to 'internal' modules.
Change-Id: Ie4c1f10d20953aeb15438273081a810ab8bc9ec9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Even if we are building frameworks, we still build some static
libraries (eg QtUiTools). Static libraries are never in frameworks
so we need to ensure that we don't generate a path to a framework
in the CMake config file in that case.
Change-Id: I533e30874a653695cb0e262617e71bbd3d4c954b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
It should be possible to include both:
* <QtGui/private/qfoo.h>
* <private/qfoo.h>
Change-Id: I83ed5bba633b4a6b9bd38e315c987d78beecfb1b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
all other build artifacts go into qtbase's build directory anyway. this
asymmetry was confusing and causes cmake users some grief.
Change-Id: I4d7f7b2318f6c5300eb00360664785cb2c8217b7
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
now that all modules have migrated, this dead code can be removed.
Change-Id: I5e9c7dd3fb271346d1b5f0e2930874da3e4d2d57
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Handle the cases where the user does
./configure -debug
make
make install
make release
make release_install
Thereby making the installed configuration different to the
'configured' configuration.
Change-Id: Ib351d8a84c4333ebcbd305d68a37c16f86869559
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Brad King <brad.king@kitware.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
if() seems to behave differently with macro parameters compared to
variables set with set().
Change-Id: Ieb9544b8c3187579fd4cfe25e2c2afa3f349eba6
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
it's a tad insane to expect the user to do that
Change-Id: I75c68f2a28656c9ba2e3fabcc79718b899b29ce7
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
qmake always sets that variable, so unless somebody pro-actively screws
it up (which doesn't seem like being worth checking for), it will just
work.
Change-Id: I3c4ada47cbd34ac68695d8efbf09c605392616f5
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
now that all modules have migrated, dispose of the clutter.
Change-Id: Ib8937c1452536f645b76c0097b927df1108afc1a
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
qtAddModule() skips adding standard library paths to LIBS. however, as
processPrlFiles() didn't know anything about that, it would not find the
prl files of qt libraries in these paths.
so centralize the definition of these default paths (we should actually
ask the linker for them) and use it in both places.
do the same for the include paths for symmetry.
Change-Id: I7e3692dc2d1c2d0c97a9151d15887b1263de137a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
the import version is not supposed to determine the plugin version -
it's only used by the qmltypes target.
Change-Id: I0cb072cb0ee469bd96830262dbf4971a2bf3134f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
On windows this doesn't need to be set. On Mac I'm not sure yet on
the various configurations.
Change-Id: I31f191711a2ae0a1bb7221ae6e1fef377d62f1dc
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change-Id: Id3ae730c0ce0630f8ccc222fe09e5d3da23d124d
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
some tests have runtime deps on the other parts
Change-Id: Ieb2925e762e94b3c0b16884be0f59e10ce8e4878
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
we need to make cmd escape the expanded output, so it doesn't confuse
its own command line parsing (which happens later!).
Change-Id: I0c2c71d276c0aebe3c2163f7f08db8050a14d7ce
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
exists() resolves the path relative to qmake's current working
directory, which is mkspecs/features. Explicitly refer to the full
path.
Change-Id: I04e9f377528bffc1ebeeed69c86d73b85a117423
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
tools like idc and lrelease are outside qtbase/bin and depend on libraries
which are not in any search path, so we need some way to let the modules
announce the locations (qt_tool.prf) and use it (in qtPrepareTool()).
Change-Id: I98d5109cbee5e745d86dde94e3dc791d42edc3ec
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
a prefix build needs to be installed first anyway
Change-Id: I798861fddad2be289e9e4f182d0373e389b57437
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
On Mac the framework include paths were generated wrong.
The $${MODULE_NAME} was missing.
This patch fixes the framework include path generation.
Change-Id: Ic0e8d69ac7ac63be755302dc822c28240c9bc3d2
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This is used as a hint for the linker.
Change-Id: I869039c1ea50f1926809ead4064317628ebbb2e7
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Make test projects declare TEST_HELPER_INSTALLS rather than calling a
function exported by testcase.prf. load(testcase) may be unsafe, as
testcase.prf should be processed after default_post.prf.
Fixes silent disabling of various autotests.
Change-Id: I56b35ffd653a637ad5ab18d64dd1a1edadfac59f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Rationale:
QCC is a wrapper around GCC, but it doesn't understand -std,
so we need to pass it via -Wc.
The underlying GCC is v4.4, which doesn't know -std=c++11
yet, only c++0x.
We can't use -std=c++0x here, because the QNX headers
depend on some GNU extensions (nanosleep() was one that I
saw), so it has to be gnu++0x, ie. STD C++ + GNU extensions.
Change-Id: Ia5caf68f558b1638224e4876f1bbec84a0a93f67
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Don't hardcode the "qt_config" EXTRA variable and use QMAKE_PKGCONFIG_VARIABLES instead.
This allows qmake create the .pc files that are unrelated to Qt.
Change-Id: Ic72005e8819a15f6c50f3aaf79424a247fba20af
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This will allow tests of modules outside of qtbase to find their
CMake config files.
Change-Id: I68036908d0fd2ec640530b57d0f572d211ef44f0
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Use a command line argument instead of an environment variable.
Change-Id: I518b21d1fb9567d182384885a308c76e108598d8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
this meant that the common mkspec was unable to do 'sensible' things with the
cflags (hence -Wno-psabi not being applied to C++ code), and probably explains a
lot of other weird things.
Change-Id: I77079027dc1b2691c53212893eb90c7b935d00a2
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Should be be reintroduced with intent if there is sufficient interest, outside of the QWS context.
Change-Id: I598f47b5cf0c10dd66534294d0f27cf0b4e5069a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Using these requires setting two environment variables, e.g, for me:
export ANDROID_NDK_ROOT=/Users/burchr/android-ndk-r7c
export ANDROID_NDK_HOST=darwin-x86
./configure -opensource -confirm-license -xplatform unsupported/linux-android-armeabi-v7a-g++ -nomake examples -nomake demos -nomake tests -v
These mkspecs are somewhat based on the work of the Necessitas crew, kudos to
them for their work in getting the NDK integration into qmake.
Change-Id: I591e423ed8dc70616009f681c81890c696110e62
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
refactoring and cleanup. fixes x-builds between different os families.
Conflicts:
mkspecs/features/qt.prf
Change-Id: I0205e6f07f77c9b015cf055dd87a471883949a91
Up until now, we had a mess of different macros used for building
DLLs, for building shared libraries on Unix systems and for building
static libraries. Some of the macros were contradictory and did not
work. From now on, there shall be only:
- QT_STATIC: indicates that it's a static Qt build and the export
macros should expand to empty
- QT_SHARED: indicates that it's a shared / dynamic Qt build and the
export macros should expand to Q_DECL_EXPORT or Q_DECL_IMPORT,
depending on whether the macro corresponds to the current module
being built (the QT_BUILD_XXXX_LIB macro comes from the module's
.pro file)
QT_BOOTSTRAPPED implies QT_STATIC since the bootstrapped tools link
statically to some source code.
QT_STATIC is recorded in qconfig.h by configure when Qt is configured
for static builds. Nothing is recorded for a shared / dynamic build,
so QT_SHARED is implied if nothing is defined. This allows for the
existence of a static_and_shared build: with nothing recorded,
defining QT_STATIC before qglobal.h causes the export macros to be
that of the static form. Linking to the static libraries is out of the
scope of this change (something for the buildsystem and linker to
figure out).
From this commit on, the proper way of declaring the export macros for
a module called QtFoo is:
#ifndef QT_STATIC
# ifdef QT_BUILD_FOO_LIB
# define Q_FOO_EXPORT Q_DECL_EXPORT
# else
# define Q_FOO_EXPORT Q_DECL_IMPORT
# endif
#else
# define Q_FOO_EXPORT
#endif
The type of the Qt build is recorded in QT_CONFIG (in qconfig.pri) so
all Qt modules build by default the same type of library. The keywords
are "static" and "shared", used in both QT_CONFIG and CONFIG. The
previous keyword of "staticlib" is deprecated and should not be used.
Discussed-on: http://lists.qt-project.org/pipermail/development/2012-April/003172.html
Change-Id: I127896607794795b681c98d08467efd8af49bcf3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This will make it easier to handle cases where the Qt installation
and the build do not match exactly. For example, on Windows, it
would be possible to do:
./configure -debug
make
make install
make release
make release_install
In which case, both debug and release libraries would be installed
even though it was only configured with -debug. On non-Windows, the
debug and release libraries would overwrite each other, so it is
not necessary to support it.
Similarly, we want to handle cases in the future where (on
non-Windows) both static and shared libraries would be
installed (again, not described with a single build configuration).
Change-Id: Ib7916c9664a0f72e40156a03bdfc79a4a6c24350
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
abuses have been observed in the wild, so make sure these variables are
not available.
Change-Id: I502c3f5db7d341cf6a8bd2ec09e87f129da2fca6
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
this is cleaner by design and allows removing some hacks.
Change-Id: I3270195b5d62caa476ffde7c1e1ef43cec99c565
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
the spec does that itself, given that the real spec is just included
nowadays, instead of copied (which never worked without side effects).
Change-Id: Ibf655b9a943dadb949d3c7a58d8fe50fcd62cef7
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
doesn't make much of a difference on unix (as the default specs are just
symlinks).
on windows, it makes the gross hack used for finding spec-specific wince
default_post.prfs unnecessary.
Change-Id: Id403dce5be487e1ae22c1f54b8095a6afdd98bc8
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the project evaluator becomes oblivious of the target mode.
the mode is set up in spec_post.prf according to the spec.
$$QMAKE_TARGET contains the feature suffixes to search, and is also
contained in $$CONFIG.
the target_mode variable itself becomes private to the Makefile class.
Change-Id: I3c06d9dab536b753343cec6c5c491d3203e50bd8
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Commit 8b822825c5 introduced the
/get version but used the wrong variable name. Fix it by using
QT_HOST_DATA.
Change-Id: Ia4759b8c6ff2de9726f3aebae2f2f39c6644d4ec
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
autotests often need private headers (especially with qpa headers now
being private) and have no compatibility requirements, so it makes sense
to just use the privates of requested modules.
this also suppresses the useless warning about using privates, in case
they are still explicitly specified.
Change-Id: I9e499bedcf6ef25777283ff1432cef7254e9093a
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
This makes it easy to add cmake module tests for all modules.
Change-Id: I303bf7674ca6ae7a8544488f96e8e02afbaa6ff0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Rely on the DESTDIR variable being set correctly by qt_module_config.
Change-Id: I1a166124024722ec5a189a7402b38646179aa890
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
As the DEFINITIONS to be used for QtAddOns is different to essential
modules, rely on the logic in qt_module_config setting this variable
correctly.
Change-Id: I64485ccd6df093216cac4a97fb1cfaac0122a218
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
quick1 got a suffix, so we need a way to set it
Change-Id: I099b868106abd4d3040047703472faa65f694f31
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Update Raspberry-Pi mkspec to indicate that wayland is the default platform
for the Raspberry-Pi.
Change-Id: I10b30ecfb16faed6027137225d9e95409faa7e87
Reviewed-by: Johannes Zellner <johannes.zellner@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Use these mkspecs to switch to the new libc++ C++ runtime library, which
in turn makes it possible to enable C++11 support with clang.
Change-Id: If92908592f8bee4829a1bad747fe396f527d26c7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
instead of making the "real" targets depend on the makefiles, add
conditional makefile generation to the targets themselves.
this causes makefile generation to follow the recursion order determined
by the project, which is important when dealing with prl and module pri
files.
a side effect of this is that qmake and make calls are interleaved now,
which is entirely different from a 'qmake -r' run.
on the downside, calling make with multiple targets which operate on the
same subprojects without prior makefile generation will make a mess, as
the qmake calls will be racing. this should be no problem, as qmake does
not generate recursive targets where this would be useful - at least by
default.
it is not sufficient to just order the creation of the makefiles
non-recursively (e.g., by using gnu-specific order-only-prerequisites),
as an interrupted and subsequently resumed build would happily skip the
nested makefiles.
workable alternative approaches would be walking the entire tree in a
pre-pass to ensure makefile presence (which is incredibly slow) or
creating additional stamp files only after recursing and having the
makefiles depend on them (which is ugly).
Task-number: QTBUG-23376
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Change-Id: I88d3e7610215677d362026de316513d3bea04b06
if a module's private headers add additional dependencies, QT_PRIVATE is
now the place to declare them. note however, that this may not contain
other private headers in turn - that would be much harder to implement,
and we want the explicitness anyway.
Change-Id: Ic516fcf1a003c95798df4fbe216f92016afaf47e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
instead of hard-coding platform differences, use a variable.
Change-Id: I20e98811ad5f07429148c6f88aedbabc3ba58fff
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
there are only two types. everything else is duplication.
Change-Id: I87f2bdd3d56b94bb2ecdb60e8861afeb9af3666f
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
everything in the projects should be normalized. only the makefile
generators need to adjust it to the native form.
Change-Id: I06a4e997f32134d13949ec4a9dd1b44367aab7cb
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
this is a qt tool, so it needs appropriate treatment
Change-Id: I0cb30ba07e03c72ee275cd916ca0a39a99fc3705
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
the last read file wins, so reading in inverse order ensures that we
respect the list's sorting by decreasing priority.
Change-Id: I2e6539a52d4195ed6af4c0143b035c39577b8310
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
that way qmake is made aware of the forwarding pris which are generated
for this module even when a top-level .qmake.cache prevents the module's
root from being found automatically.
the path is also added to the cache, so that subsequent partial
qmake-ing of the tree will still find the module.
this also makes the -cache-module-fwd parameter of syncqt useless, so
remove it.
Change-Id: I2afbc52a465c0b3260e9bcaf032c43a82ae8061f
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the latter allows sub-projects to dynamically extend the qmake search path
specifically for modules. the others are just for congruency with
QMAKEPATH and QMAKEFEATURES.
Change-Id: I0c099035f8dc8ee8645566dbc635644a15ed9da5
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this has the advantage that the %mastercontent assignments in sync.profile
are not necessary any more. as it happens, most modules got them wrong
anyway.
Change-Id: Ibdf689be408f18e1d90c44ef4ecacd7c24b1f1c9
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
each qt module comes properly declared and located, so there is simply
no point in performing a search.
Change-Id: I86fad21bb8e128b85f1000cc116cc44a23642eb4
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this will allow us to not rely on the modules matching the global
qt_framework setting.
Change-Id: Ic1dce757ff63d06af54a2428e23a1bbcf1c81ba1
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
there won't be terribly many projects relying on it. now's the time to
find out for sure ...
this reverts commit 3279b07302fde0eb14f9b197c9ad2e14d512817e
Change-Id: Id36687ab3bfc7dd5ce35b584621a8f5b3ee00fc9
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this only needs to be set in one module each - the one which provides
the relevant tool.
this is moderately source-incompatible, in that a package which queries
a given variable from the wrong library won't get the path it looks for
any more. as it's likely that everyone was using QtCore as a reference
anyway, this will only affect uic - which is in the new QtWidgets
library, to which people need to adjust anyway.
Change-Id: If05d3c33fda6cd12466e261391b825c59651d3e4
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
that way we can theoretically support modules outside $QTDIR.
also, it's just cleaner.
Change-Id: I6139ebc7328b64ace8552b3e54f9a8c69248ceec
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
don't prepend the paths, as this will only mess up building of
subsequent modules (e.g., building qtdeclarative against an installed
qtbase would pick up the headers from the qtdeclarative previously
installed into the same directory as qtbase).
for frameworks this was a rather pointless exercise in the first place,
as their headers are properly isolated anyway.
however, make sure that we don't add system locations to the search
paths, as this is a) unnecessary and b) messes up subsequent libraries
in non-standard locations which want to shadow versions in standard
locations (pkg-config .pc files which add standard paths are considered
broken as well).
Change-Id: Ie1dc65d4767e98e1df6e49012505141935a6c704
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this fully replaces qtmodule-configtests.
it is way shorter and it actually integrates reasonably with qmake.
Change-Id: I819cc6807ad3661c419b54fa253894936dd88a64
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this doesn't make too much sense as such, but the file will grow.
Change-Id: Iceaecdc24f83b3dafb40c8d2f1b6cddafa2d70a1
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the location is determined by syncqt rather precisely. no need to
reverse-engineer config files.
$$HEADERS_PRI doesn't seem used anywhere, so don't set it as a side
effect.
Change-Id: I54a63356c350c0ddae4c880bf374fcd127282429
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the forwarding pri is loaded even if it was still created by syncqt, so a
top-level qmake -r will still catch it even in the future.
Change-Id: I2e4b556cd06eb88be9ee378662a2e6e1bff67ad7
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
there is no point in adding Qt modules to SUBDIRS projects.
as QT contains core and gui by default, the operations are relatively
expensive, so skip them when they are unneeded.
Change-Id: Ibe6447ff452e403cb040fabe245d248edbda0eaa
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the check whether we are building a lib or an app (and thus have a target)
is done by quite some feature files (and generally wrongly, as they do not
account for the new aux target), so centralize it in default_post.prf.
Change-Id: I868edbc4185be8a6c23ecd4a2c126024d73cdeb4
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the declarative module is a fake, so there is no library to install.
Change-Id: I0dcd39f3304e38adce9ea34e2268905525abd3d5
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the qt version is always set.
otoh, we need to allow the module to override the own version.
Change-Id: Ic3eb7dae59a5fb011cede09151553b652a0a1d78
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
qrc_ files are generally not meant to be included, so there is not much
point in doing this.
qprintsupport was a notable exception - which broke on mac and thus
needed a hack. just remove the qrc_ inclusion.
Change-Id: If5115665f331a280869e800673bf7b81d3ab559a
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this is needed by webkit's creative directory layout.
Change-Id: I2317162c11696d2820423d63563b10d3024a6cb6
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this makes qmake find them automatically now.
consequently, also do not write QMAKE_EXTRA_MODULE_FORWARDS to
.qmake.cache. still write the cache file, though, as otherwise a
top-level cache would mess up the module root detection.
Change-Id: I998b94fcc73ca3f8bf1af09a394ff8d40cf1fb76
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
a variable name should not reflect the tool which uses it, but its
purpose - especially, as the scope will be extended soon.
this variable is used by webkit, which has a somewhat creative directory
layout.
Change-Id: Id3d3fad6ed9395cb967aeabc79e47a0ba17f5423
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
absorb module.prf into qt_installs.prf, as that's where it belongs.
add qt_install_module option and automatically set it in
qt_module_config. make qt_installs use that option.
Change-Id: I860616f3a29a456f7b88ddaffa09375400c8911e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
it's used by people (in particular, qt creator), so it would be not nice
to just delete it entirely.
Change-Id: I6bd849d00ebfe3b9b126e01a6d1c6e7c6584d8ac
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
they are equivalent to QT_INSTALL_(HEADERS|LIBS)/get.
Change-Id: Ic4b47f3ca7db55785b96f19020a2fa020a8d25bd
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the qtbase install dir being a build dir is a necessary and sufficient
condition for detecting a developer build.
Change-Id: I3d98c789ac6fbe570980459edabb9a941bf1e5d6
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
instead, always pass -qtdir (which, btw, is a slight misnomer - it
should be -qtdatadir) with the correct path. this centralizes the
relevant logic in default_pre.prf.
Change-Id: Icc788d3f3e5f7b68b444e63e181efdea3b4ef160
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
this cleans up a lot of hacks supporting the build of qt, including the
last bits of $QTDIR.
Change-Id: Id119886ed8097967dad6cf86ebd4e71d90c42841
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
qt is built with depend_includepath anyway
Change-Id: I3967ad0bb52f5a3d88fceaf102c79f6711aaa83a
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
specifically, qtestlib.prf, qdbus.prf, help.prf, designer.prf and
quitools.prf - they have been obsoleted by modularization.
add noisy backwards compat hack to qt.prf.
Change-Id: I26f84fdd51798265471e20dd1f40efec59b1087e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
... and followup fixes.
this is not needed any more due to the breaking patch being reverted.
Change-Id: Ia3416fcc16ddece680efbd0322286a601879fa0a
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
The fbdev fallback code now resides in the default implemenatation of
the hooks.
Change-Id: Id3d2cd23ab826b90c0e6d442bfb222aa8c291646
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
This solved QTBUG-26111 in which qtjsbackend gets built with an
incomplete framework on Mac OSX. This was traced back to commit
6a6fd56e66 which moved QMAKE_CONFIG
values from .qmake.cache to mkspecs/qmodule.pri. Since qtjsbackend
contains config tests it creates its own .qmake.cache which was
previously masking this issue.
QMAKE_CONFIG incorrectly contained debug for debug_and_release builds
even though debug and release are already present in the CONFIG variable
in mkspecs/qconfig.pri. The changes to configure prevent CONFIG in
qmodule.pri from containing debug and release variables and ensure
that QT_CONFIG contains build_all and debug_and_release if appropriate.
Configure.app is also adjusted to match this behaviour.
The other part of the change is to qt_module_config.prf and
qt_plugin.prf. These changes take care of populating CONFIG with
the appropriate debug_and_release and build_all variables depending
upon what is present in QT_CONFIG. This ensures that the Qt modules
and plugins get built with the same configuration as qtbase.
The special handling for the qcocoa QPA plugin ensures that it is
built in release mode only to preserve the behaviour introduced by
commit 5603f94eaa.
Task-number: QTBUG-26111
Change-Id: I6f65aba50709e1b2431b8b4411ff30a06f7d8aed
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The QNX toolchain can use Neon on ARM and SSE<X> on x86/x86_64.
Change-Id: I36c61fa12b65d806b3cc60a0aefcb63964f9ab7e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The current cursor implementation can be a bit hard to read
without hints about which methods are overriden.
Change-Id: I3376890a13be46e1ece03d1442dd5a15ccd61382
Reviewed-by: Johannes Zellner <johannes.zellner@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since local thread storage is used we need to turn this on for the xlc
compiler with the -qtls flag.
Change-Id: Ib40ec87edada56a062b0c72b7d47b38a6d0b5b13
Reviewed-by: Teemu Katajisto <teemu.katajisto@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Follow-up to 6a51062e99 which did this
for win32-g++.
Change-Id: I3ba0dd8ffca46853844b55b16dc92270fa8a623a
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The OpenmaxIL video_render component uses the dispmanx layer 0, so EGLFS
should use at least z index 1. Otherwise the video_render would conflict
with the UI and thus overpaints it.
Change-Id: I3bed23567fa8c4399207289c6ef952c5a5e0d503
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Donald Carr <donald.carr@nokia.com>
See https://github.com/raspberrypi/firmware/pull/32 for more information.
Change-Id: I51bb532336ed069cde938540cd962721b1a72adb
Reviewed-by: Johannes Zellner <johannes.zellner@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
This allows us to have different flags for the compilers for
supporting the same feature. For example, the official flag in GCC to
support AVX2 is -mavx2, but ICC does not support it (yet), requiring
-march=core-avx2 or -xCORE-AVX2. That flag, instead, enables support
for all the features that the "Core-AVX2" processor (codename Haswell)
will support. And clearly, the MSVC flags are different.
Change-Id: I33b6d8617520925e807747180a8dbaafd79b7a9a
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This way the target will be created and have its properties
populated only one time.
I tried wrapping the whole file in an 'include guard', but that
broke the unit test in tests/auto/cmake/pass1 (and
the qt5_use_module function), because the function causes the
variables in the Config file to not exist outside of the
scope (eg for include directories), and yet, Qt5${Module}_FOUND is
still true even when the find_package was previously called in a
function, so it is not found and processed again.
The change in Qt5CoreConfigExtras.cmake does not need to be guarded
as it is only ever included from Qt5CoreConfig.
Change-Id: Iaa016563db5eb61294360ac9e003c9c923393d8c
Reviewed-by: Brad King <brad.king@kitware.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This fixes breakage in the Raspberry Pi spec introduced in:
https://codereview.qt-project.org/#change,27536
due to incorrect depth assumptions regarding included files.
Change-Id: I802b828f1755f299939fed192dd3ca9bf1a83002
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Enabling support for C++11 adds CONFIG+=c++11 to the Qt build. Projects
using Qt can check for C++11 support using contains(QT_CONFIG, c++11) in
their .pr[iof] files.
The QMAKE_CXXFLAGS_CXX11 and QMAKE_LFLAGS_CXX11 qmake varibles contain
any arguments the compiler needs to enable C++11. CONFIG+=c++11 adds
these arguments to the build.
Support for clang, g++, and the Intel C++ Compiler for Linux are
included in this commit.
Change-Id: Id77f86d7ad4d5c740b890446a40b105879a0d327
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The cursor is rendered on a dispmanx layer and moved
around. This approach saves us from having to update the
underlying window each time the cursor moves.
Dispmanx layers cannot be moved to negative coords. As
a result, currently it is not possible to move to a
location less than the hostpot. A future commit will
fix this problem.
Change-Id: Ida5ee961d03a6929860c515e503482756a4913ed
Reviewed-by: Johannes Zellner <johannes.zellner@nokia.com>
Reviewed-by: Andy Nichols <andy.nichols@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
There is no session management currently implemented for the xcb QPA
backend. Update the build system to reflect this.
Change-Id: I3486de5741f1fb7e09330ca142b8235a84d3b91d
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Instead of saving the ability of the compiler to produce SSE2, AVX,
Neon, etc. code in .qmake.cache (Unix) or qconfig.pri (Windows), move
everything to qmodule.pri. Accordingly, move the DEFINES += settings
to qt_module.prf instead of qt.prf.
This allows us to re-use these settings in other Qt modules (other
than qtbase), if necessary. Though currently the extra compiler
definitions are found only in src/gui/gui.pro. They can be moved
elsewhere when it becomes necessary.
As a side-effect of this change, some other flags are moved from
.qmake.cache to qmodule.pri (on Unix). The flags that are getting
moved should probably be moved anyway.
Change-Id: Ibc3ab0111e148d81870772f9357273660aa93417
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The QT_HAVE_xxx macros are replaced with QT_COMPILER_SUPPORTS_xxx.
They indicate that the compiler supports those intrinsics, but not
necessarily that they can be used right now.
ICC and MSVC allow one to use the intrinsics anywhere, but for Qt all
uses of the intrinsics are either in specially-built files, protected
by runtime checks, or they are unconditional (qstring.cpp). So we only
use the intrinsics when the compiler was instructed to generate code
for that instruction set anyway.
Change-Id: Ie58eebbc0518ad1d5420a85174fd84153bb9abaa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
- Add QWindowsEGLContext usable for ANGLE and Windows CE.
- Add QWindowsEGLStaticContext containing the display
for resource cleanup.
- Add EGLSurface to QWindowsWindow.
- Add a -angle option specifying the path to the external
ANGLE installation to configure, add libraries to
the mkspecs.
Initial-patch-by: Jabot Corentin <corentinjabot@gmail.com>
Task-number: QTBUG-24207
Change-Id: I5f80b1efb6996da7c5d70aa3720f7801c9e4c6af
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Remove the check from ST7540 and PNX8473 specs since
it's already checked in deviceSanityCheckCompiler
Change-Id: I2accb12f9e692e253f76194ca68b1f4cc673a833
Reviewed-by: Johannes Zellner <johannes.zellner@nokia.com>
Reviewed-by: Donald Carr <donald.carr@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
directfbegl requires libQtPlatformSupport to provide some EGL
helper functions. Enable EGL by adding it to the QT_CONFIG variable
in the qmake.conf.
Change-Id: I80d3163d9da4b9eb232aea72ba7d4388453f8247
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Re-enable checking if the compiler is in the path. The previous
commit dealt with a user/spec author not setting CROSS_COMPILE and
then picking up the host g++. Re-add the 'which' check, but put it
after the sanity check for the CROSS_COMPILE variable. This check
assumes that QMAKE_CXX is of the form "${CROSS_COMPILE}g++".
Change-Id: I54f7e058a75d26d73eca5a860946a6854ce91d67
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
QMAKE_CXX is initialized by default to gcc. As a result,
'which $QMAKE_CXX' always succeeds.
This change removes the 'which' check and makes it explicit
that CROSS_COMPILE is a mandatory option to -device mkspecs.
Change-Id: Icefa9d14fc24086a60c9108ff7d9d16fd9990995
Done-with: Johannes Zellner
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Change-Id: Iec687e9cd015ed389a637b50e4e4e332478b6e1f
Reviewed-by: Donald Carr <donald.carr@nokia.com>
Reviewed-by: Andy Nichols <andy.nichols@nokia.com>
Introduce platform libs hook to handle/allow device specific initialization and the associated symbol resolution
Change-Id: I098b07dcb581390d369d9165c6cedc7ace1e088a
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
-O2 is already the default optimization level for release builds,
as defined in gcc-base.conf. In addition, it shouldn't be set for
debug builds.
Change-Id: Idd7406b0d135d9579676b389050fd6e5776e722c
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Compiler flags like CPU architecture and FPU should be set on
QMAKE_CFLAGS instead of QMAKE_CFLAGS_RELEASE, as the latter only
applies to release builds
Change-Id: I2e729a9e413934e904fc2810394e118940b8557f
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
This significantly reduces the size of the generated code
in places where we don't need exceptions.
The -(no-)exceptions configure flag has been removed in the
process, as there is now a fine grained way to control this
on a per module level, and Qt is being compiled without
exceptions in most places.
Change-Id: I99a15c5d03339db1fbffd4987935d0d671cdbc32
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This adds the Visual Studio 11 mkspec
and the corresponding changes to configure
and qmake makesystem.
Change-Id: I3a7e82a6f7f90aa0a94dedd493ebaa66bf100923
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This is required if Qt is installed into a directory with spaces.
Change-Id: I1d6874265558d712ac98a3aef670c2934a632ab1
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Initially we didn't do this because someone could accidentally create
another target of a conflicting name, and used a variable to store whether we
have created the target already or not.
That wasn't adequeate to deal with finding the package in a scope
like a function, so we used a directory property. However, the directory
property is not valid in the same scopes as the defined target. For
example, finding a Qt module in both a directory and a subdirectory causes
a conflict.
As it is already unlikely that a target would be accidentally created with
a name like Qt5::Core, we should simply use the IF(TARGET) form.
Change-Id: If64f25d45f51edcd1edb0d4bfb5ed3bb2479bd27
Reviewed-by: David Faure <faure@kde.org>
Normally you want to pass -installdir $$[QT_INSTALL_DOCS] to qdoc by
default. However, if you want to force the generation of URL links to
the documentation, the option cannot be specified.
By setting the QMAKE_DOCS_INSTALLDIR variable in default_pre.prf a
project may override it at will, as for example Qt Creator would do.
Change-Id: Ib31f03acf4e8050cf2dd3aa33f3a10ed027f1df7
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
qmake -set can be used instead to set a the default cross compile.
device_config.prf already contains code to read this default.
Remove per-spec CROSS_COMPILE checks
Introduce deviceSanityCheckCompiler() usage where appropriate
Done-with: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Change-Id: I07c75c9e933dc1174a1bf8bf523b6b4a6b427408
Reviewed-by: Romain Pokrzywka <romain.pokrzywka@kdab.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
This is more resilient to calling find_package in a scope such
as a function.
Change-Id: I17e69a416f4aed3102fa6195d239bcf4ce0b306b
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Add a PATH to search for dependencies in the current prefix, and
disable other CMake searching logic with NO_DEFAULT_PATH.
A Qt installation must all be installed to the same prefix currently.
If that constraint is ever relaxed, we can turn this into a hint instead.
Change-Id: I633cafb7e546dbd102ac0b2ed18db260d26adc51
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
udev headers now ship as part of the base debian reference image
Change-Id: I181c7f48ca59af46fccf8f3204845379d068c023
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Modern versions of Xcode properly support dwarf2, and as such dwarf2 is
always enabled. This change removes the ability to turn it off, making
dwarf2 non-optional.
Change-Id: I149daeae6048ee8a1ed116363572173ad219102e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Change-Id: I4c70ed2808396931fff986fbfad5940dd39e74f6
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change-Id: I9f0e9316241b4cb615350876b11ee263f7efd3bf
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Only call qdoc for projects which sets the QMAKE_DOCS variable to
point to a qdocconf file.
Exclude examples/ and tests/ from the qdoc run, by adding
no_docs_target
to CONFIG for those projects.
Change-Id: Ic856c8f19db59309302d0602b3e99735609e525a
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
qpa header files were not installed under qpa/.
Change-Id: I243c3a7e83a342f7485791a1a29b65c9a8f25d6b
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Those components are not known to FindGTK2.cmake.
Change-Id: I4a7fe35d7d118168c24285f3ea8f57822b2facff
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Add mkspecs/macx-clang-32
Add mkspecs/macx-g++-32
Add mkspecs/common/clang-mac.conf
Skip the rest of the Mac mkspecs (icc, llvm, g++40,
g++42, builder, Xcode, xlc) pending a cleanup where
we determine which ones to keep.
Change-Id: I00ceddfcbdb5119cb132433bad43e4aed016eab2
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: James Turner <james.turner@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Remove all [PPC|PPC64|X86|x86_64] CFLAGS, CXXFLAGS
and OBJECTIVE_CFLAGS. Delete the arch prf files.
32/64 bit arch selection will be made using a different
mechanism in Qt 5. Universal builds are not supported.
Change-Id: I4664f2c31801cec7fb4d240f41c2c5204a109020
Reviewed-by: James Turner <james.turner@kdab.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reverts commit df43b9a06a.
Using the same depends information as QMake provides adds a lot of
convenience for users, and is mostly 'correct' from a CMake
point of view anyway.
Change-Id: I8f2a2f74a687c25a0dedcc491ef72ddb5b136090
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Commit 996672933a has made the
freebsd-g++46 mkspec use g++-base.conf, which on its turn resets
QMAKE_CC and QMAKE_CXX to other values.
Redefine them to gcc46 and g++46, respectively (and fix the linker
values) after the inclusion of g++-unix.conf so the settings are not
lost.
Change-Id: I2d03548fdc492c5e4c4744b636b29df2cefe2acd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Make the option name align with the name of the module.
Change-Id: I29a822b55b3cb52a51592aa2bd0746a53bfe44b9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Aurindam Jana <aurindam.jana@nokia.com>
This only works with CMake 2.8.8, but it is no harm to earlier versions.
Change-Id: I62c220e4b24f951e83c23eb57d5f833de4d181c5
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change-Id: I319b04cdb21860652658ee8d3e577d41a913ed5a
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change-Id: I30ca05d3c692a707cfe829ad5fee099549bab540
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change-Id: I5d7c26f12a296ac3527575149978b18c5e9a4a67
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Modified common MacOS gcc config for iOS compatibility. Added iOS
mkspecs for iOS devices and simulator using G++, LLVM-G++ or CLANG
compilers.
Change-Id: If0a0b1a3ce4e0dc4db319a315e227a9d31549399
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The beagleboard and Archos gen8 tablets are built on the same hardware
and OpenEmbedded platform build system.
The makespecs enable OpenGL/ES2 support and EGLFS as the default
platform.
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Donald Carr <donald.carr@nokia.com>
Change-Id: I04938676f82f9136efd662ff3ede16221eadf275
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
This change will cause any use of methods and classes declared with
Q_DECL_DEPRECATED to produce a warning in the compilation
output. Those warnings need to be silenced before the Qt 5.0 release,
preferably before the beta.
Change-Id: I28ce133867cc5918e177c57f6e5f7ab9421989ad
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The workaround should no longer be necessary.
It causes compile errors for MinGW since the command lines
are too long.
This reverts commit 6225e3ba01.
Change-Id: I0288f4621f072b91dc94f25092ef124fa4c1b09e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Matthew Vogt <matthew.vogt@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The config option debug_and_release is set on Windows and on
mac (unless xcode is used independently of whether Qt is configured
with -release or not.)
We need to check CONFIG(release,debug|release) to see if
-release was set.
Change-Id: Ibf952958874f6b102981526b3397e848c207a3f2
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Change-Id: Id85d18d9f21711e8d53e8e4bfdf39d10e135f593
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
in contrast to ::strdup(), qstrdup() allocates memory via new[];
deallocating this memory with free() leads to undefine behavior.
Change-Id: I0692c4bef010c05de547283b00b6c6043ac24c79
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
lang/gcc40 was removed from FreeBSD's ports tree in 2007, and the
lang/gcc port, which provides a stable GCC version newer than the one in
the base system, is currently pointing to the 4.6 series.
Change-Id: Ifd959ef7b9cd122aa606644e97e337ace8742245
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Make freebsd-g++40 include gcc-base-unix.conf and g++-unix.conf and
eliminate a lot of duplicate definitions.
Change-Id: Ib3fe572ee276645fb03034a08fbc8e06720b6372
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
According to FreeBSD svn r52802 from 1999 the -aout compiler option and
the QT_AOUT_UNDERSCORE trick were already obsolete.
Since the FreeBSD project itself only supports versions 7 and above
these days, the definition can be safely removed.
Change-Id: I324d5d5b136a6560d9e1b5c81b93efc32d87cdc2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
GCC 3.4 is older than the 4.2.1 in the base system, and should be
removed from the ports tree.
Besides, nobody in their sane mind would want to build Qt with such an
old compiler.
Change-Id: Ib40357758058505465a8bfcefbd182b9240591a5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
QT_SOCKLEN_T was being redefined depending on whether FreeBSD was < or
>= 4, branched in early 1999.
FreeBSD < 7 is not supported by the upstream project anymore, so we
can simplify the code and rely on the QT_SOCKLEN_T definition in
common/posix/qplatformdefs.h instead.
Change-Id: I0e06fc37e29158932b95a2619a7442c6068a7d32
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The current approach of forcing people to pass the fully qualified prefix
of their toolchain to the configure script is verbose and something of a
chore for people who use the same toolchain to target several devices.
This allows you to set a single toolchain for use with all Qt targets via:
qmake -set CROSS_COMPILE foo
You can still explicitly override this toolchain, as originally mandated,
with the configure time device-option arguments.
Change-Id: Ibd3d940bb08fa09499533f9c661557e337a8421a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
A recent change in platformsupport required "egl" to be defined,
otherwise the QNX plugin would fail at runtime with unresolved symbols.
Now the EGL config test passes.
Change-Id: I111eb939abac86885bcdb35d5f5899f515bd8c4e
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Add DirectFB buildsystem integration by adding a configure target
and adding it as subdirectory to the project file. The default is
to automatically build directfb. Update the Broadcom/9425 build.
Change-Id: I482f865cebd9d5cd4c98c184773f8534f92db9df
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
The EGL integration is vendor specific, add platform hooks to the
DirectFB plugin and implement them for the Broadcom 97425. The hook
interface is internal and there are no ABI/API gurantees.
Change-Id: I33359830c51f16895e771837fccb71e03c81cf18
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Add mkspec for the Trident's Shiner platform to be used in conjunction
with the -device support in configure. This allows you to build Qt
Change-Id: I68d8e8eb78f073e98f72207e9c5de6a0da0ed35d
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Add mkspec for the STMicroelectronic's ST7108 platform to be used in
conjunction with the -device support in configure. This allows you
to build Qt with the application libraries provided by STM SDK 35.
Change-Id: I36aa174200f034ccd6ee285e3f8a8ffec99b3e70
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Add mkspec for the STMicroelectronic's ST7540 platform to be used in
conjunction with the -device support in configure. This allows you
to build Qt with the application libraries provided by STM SDK 36.
Change-Id: I4369b23b9a0c9063417e5cc71969f65e967e4019
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
The naming convention for these libraries says that libGLES_CM is to be
used when EGL is included while libGLESv1_CM should be used when EGL is
not included. Since we have a seperate variable for libEGL, it
makes sense to have this variable represent the non-EGL version of the
library.
Change-Id: I9147c116da7be4a296a0ebeac39762b46725f10e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
There are two problems with the current design:
1. if (hooks) hooks->foo() doesn't work in debug mode when no platform hook
is defined. The problem doesn't arise in release mode because the compiler
optimizes away the if (hooks) into a no-op since hooks is NULL when no
platform hook is defined.
2. Adding a new hook requires changing every platform's hook implementation.
New approach:
1. Define QEglFSHooks as a class with virtual functions. A stub file provides
the default implementation.
2. Platform hooks derive from above class and reimplement whatever is needed.
The filenames and variables have been changed to be more in line with the
Qt style.
Change-Id: I2eaaa5ad7c8b48a06361c4747d4f210c428c983f
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
It's better to fail at linking time than to try and figure out later why
QPluginLoader refuses to load the plugin.
Change-Id: I439bad9dcdbfff9f76efe40381fd7ccfffe738bc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Donald Carr <donald.carr@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
It transpires that QNX 6.5.0 does not yet have libc support for the
gcc stack smashing protection.
Change-Id: Ic635662b6aa3ce2fad5f69e236386ae9ace420db
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Add mkspec for the Raspberry PI platform to be used in conjunction with the
-device support in configure. This allows you to build Qt with the
application libraries provided by the Raspberry PI foundation.
The Raspberry PI is described here:
http://en.wikipedia.org/wiki/Raspberry_Pi
and its use with Qt is documented here:
http://wiki.qt-project.org/Devices/RaspberryPi
Change-Id: Ib8d11d0a469edaaf34ccc04cf33a42a725fc2bdb
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
EGL provides an api to create a rendering context for khronos APIs
on native surfaces. The board initialization and window creation
is platform specific.
This commit adds platform hooks/extensions to the EGLFS plugin and
implements them for the Amlogic 8726M. The hook interface is internal
and there are no ABI/API guarantees.
EGLFS is now linked with -Wl,-no-undefined to make sure that a hook does not
add unresolvable symbols.
Change-Id: I7f4fcdb422aacbf00de468f4d8e85ae5368bfacf
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
