Use Q_STATIC_ASSERT_X give a better error message.
If C++11 is used, you get the string in the error.
Else, clicking on the QStaticFailure error still shows you the
string in the qobject.h source code)
And report better failure if the return types do not match.
(Without the static assert, you would still have a compilation error,
but in an unrelated place, with no reference to the actual connect()
call. The error was thrown from the virtual call
QSlotObject::call, without saying where it was instantiated)
Previously the error was relying on the existence of a type inside
CheckCompatibleArguments, but the Q_STATIC_ASSERT requires a bool
(hence the introduction of CheckCompatibleArguments::value)
There also was a typo in the return value of
AreArgumentsCompatible::dummy that made that code not work, and that
error not be reported.
(Instead, the error was reported when QObjectSlot::call is instantiated)
Specialization of AreArgumentsCompatible for the void type have been
added because if the return value of a signal or slot is void, the
connection should work.
Change-Id: I5a93ec787ce2a4b94a26630ca31d5001cd294e4d
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
QTest::pixmapsAreEqual() was left in the Qt4 API for compatibility with
some old tests written for Qt3. QCOMPARE() is the preferred way to
compare QPixmaps and provides superior diagnostic output when a
comparison fails.
This commit removes QTest::pixmapsAreEqual() from the testlib API and
replaces the last few remaining calls with QCOMPARE.
Change-Id: I051c0e7d3bda072855fcd262d82e8e540619233b
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Critical bug... Good thing I had backups of my $HOME.
Change-Id: I43b3a80786c946b0aec797036c1164d436d521f8
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The "happy eyeballs" connection code means that IPv4 and IPv6 connections
are both attempted for a http request.
For a normal http server, this is no problem, but the MiniHttpServer in
the test code is very simplistic and cannot cope with more than one
client connected at the same time.
On windows this causes all these tests to fail with timeouts.
Changed the MiniHttpServer to listen on IPv4 only instead of Any address.
Change-Id: I81e249997d894d266001da474a351b1f5642599e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Modifying the proxy causes a detach(), so the socket is still using
the unmodified proxy.
Changed this to setProxy() the modified one back to the socket.
Test case tst_QNetworkReply::httpProxyCommands()
Change-Id: I448c2f2ab43ce8d78bc6edb8261599bf67372676
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Now works with bcm5974: Added manual contact tracking for drivers that
do not report a tracking id and fixed abs limit querying to use
ABS_MT_* instead of ABS_*.
Fixed reported area: The incoming point was the top-left point instead
of the center which was incorrect.
Added pressure support.
Tracking of event type has been removed as handleTouchEvent no longer
needs it.
Broken debug prints have been removed.
Changed udev auto-detection to pick only /dev/input/event*.
Fixed multiple released state reports with some drivers.
Name and capabilities are now set properly for the QTouchDevice.
Change-Id: I8f026c9a14465bfb6d567f4dcf36c5c03f843868
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
This is a regression introduced in Qt 4.8
When QApplication::processEvents is called from a destructor, it is
possible that pending events would still be called on the already
destroyed subclass.
Prevent that by using the same pattern as in QMetaObject::activate
Change-Id: Ida50db07ae089264402dafcde7a41a066479d08b
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Else tst_moc::oldStyleCasts will fail if one add STATIC_ASSERT in
some headers included by moc generated files
Change-Id: I29ae64c14f10c889137fde36bb14c8ce047d5244
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
childAt used to return an integer.
Return an interface instead.
Not requiring a direct child to be returned allows optimizing
by bypassing iterating through the hierarchy of accessibles.
For QtQuick this is the only sensible way of implementing this.
The bridges are still responsible for finding the top-most element.
The default implementation in QAccessibleObject is sufficient
to return direct children. The implementation in
QAccessibleApplication is therfore no longer needed.
Change-Id: Id7100dd5bcc3a98de516a7f4a12eaaa41cb46d26
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
It doesn't currently have any effect and needs to be re-thought
anyway.
Change-Id: I6e620ca5b341264bbf5279a19e8f25af8fa7d396
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Allows the extras file to contain references to the target.
Change-Id: I47332c4efcb7ba0132509a41fa3040531cd1c81f
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
QMetaTypeInterface has to be POD because it is constructed in a static
array. Constructors in POD types are not allowed so we will use a macro
instead.
Change-Id: Iab9ae776dfe4dcd7148558f02d6181c5917aa5c3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Many Mac OS users expect to have the option to see the file extension
of the file being saved in the save dialog. This patch enables that
option.
Change-Id: I7713bcef16b6f43135b382c7107f306009c7a0a1
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Check for qApp before using. I'm aware that this is in commented
out code right now; but I wanted to make sure it doesn't
accidently slip back in without this check so I'm submitting
this patch. It caused problems at shutdown in 4.8.
Change-Id: I1c2358ab94f8b698e5519b3e0f988fb5cdd653fa
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
The private class had two append() methods, one appending a column and
one appending a row. Use more meaningful names instead of overloading
orthogonal operations.
Change-Id: I97e0268d6cb289694557846f244fe770cf980aaf
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Testcase: adding this line at the end of mkspecs/linux-g++-64/qmake.conf
QMAKE_CXX = ccache g++
Result:
fvisibility.test: line 28: ccache g++: command not found
Symbol visibility control disabled.
Result after fix:
Symbol visibility control enabled.
Change-Id: I4049264a38a43e1bee3cb823d53836f0689f0b53
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
These were only actually implemented on Symbian, thus, they aren't too useful,
apart from confusing developers when they don't work.
Removed per the discussion on:
http://lists.qt-project.org/pipermail/development/2011-December/000860.html
Change-Id: Id097cb392a3d964364adbe51a72a22927b9c382c
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Introduced by 4ebceaba39.
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change-Id: I81985c4121db5f6abd832f64ef412646daec6259
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
The code for reading named pipes can now be used in
other places as well.
Change-Id: Id734617a3927e369491a6c5daf965169ceb01f74
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Events for mouse clicks that active windows are by
default suppressed. Qt needs to see all events in
order to properly close popup windows.
Wether or not the event should be sent to the
target needs to be implemented later on - in the
QWidget world this is controlled by WA_MacNoClickThrough
Change-Id: I4b96d33978ed2b3cb793f52bb5b6fef234190a00
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@nokia.com>
Incase we have both IPv4 and IPv6 available after the host lookup
we should delay the connection attempt to IPv4.
Task-number: QTBUG-23066
Change-Id: I8c0177cf125c9daae314ada73cacef790a39b856
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Use QTestLog::info() rather than qDebug() to output informational
messages from testlib. Source file and line are deliberately omitted as
they would come from testlib rather than from a test program.
Change-Id: I7b479bba4d3d553c6fa846d8d5ea2c29a8ef42b8
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Previously, if the signal dumper was switched on with the -vs
command-line switch, it would never be switched off again.
Change-Id: I192e188010471525723fad0844ff33e9482128ea
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Convert bezier curves to polylines before rasterizing with gray
raster.
Change-Id: I353debd4338f2a3ce2fa1cfa1bff9dd2e36f05ab
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Call [QNSView updateGeometry] directly. We can't
got through the frameDidChange notification since
we are not actually changing the QNSView frame.
Rename frameDidChangeNotification -> updateGeometry
sine it now handles updates from two different sources.
Change-Id: I848e558294093cd51d97778734b5cf872435266a
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Unless QWindow:baseSize returns a valid value.
Setting the size caused lots of window geometry
instability in Creator.
Change-Id: Iab45e88b47207db900c7655c217959391d84a1bb
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
convertRectToScreen was added in 10.7, use
convertBaseToScreen on 10.6
Change-Id: Ica1ee0f62e1fc9b0d5ccf463419496684da779b7
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Required for launching the sub-processes. The test worked only
when launched locally, not from 'make check'.
Change-Id: I42c9202a7726c3135f94445fb336b2b8241535a4
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This removes confusion when we add a Linux-specific QPA dispatcher, and is
technically more accurate, as QEDQPA was not 'the' QPA event dispatcher in the
first place.
Change-Id: I2a41d425f284522ee76ef86782d5eb2bdd805120
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
Since integrity was pulling in all the same code (except the glib-in-QT_CONFIG
branch), we can just merge this in.
This shouldn't break integrity unless they somehow magically inject glib into
QT_CONFIG without actually having glib, but the removal of redundancy makes this
worthwhile.
Change-Id: I527b5e60bea4452fdca5eedfe729214f16519234
Reviewed-by: Rolland Dudemaine <rolland@ghs.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
This saves us from creating a single shot timer every time we emit
readyRead and eliminates the parallel pendingReadyRead flag.
Done-with: ossi
Change-Id: I1de7f07b83b583b9d60dd8862d6a9f7865b5b891
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
We must not close the QIODevice, if we detect a broken pipe.
We still can have data in our read buffer that can be read by the user.
Autotest: tst_QLocalSocket::threadedConnection
Change-Id: Ibe823c006516acb27f51a06ca0bbe5555dbd88f5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Not only is this extra if unnecesary - it is confusing.
oldSize is different from size.
(otherwise we would have returned less than 10 lines above)
Change-Id: Ie911414f679df2be7b5c8bc2670225d46e986b32
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
There is no reason to find out where to update the headerview
if updates aren't enabled. Another approch I considered to skip the
whole calculation and just call update. I seriosly doubt that this
calculation and update of a particular QHeaderView rect will normally(*)
be faster than just updating everything.
However to be safe I have done the conservative fix.
(*) Normally but with many/fragmented spans in the headerview.
Change-Id: Ia812a747ee825653db0345cdc34f9d2f7155ea01
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This makes it easier to see the guts of the unix event dispatcher, and to
experiment with it.
Change-Id: I715bb68c4de6798e10bc55304a128b88e0249c63
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
This field isn't used at all in qtbase, nor in any of the qt5
submodules.
Change-Id: If57d389935593f797818506a220c6a3cc04b6078
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Commits a6ae75f92a and
6f0f9f6928 were cherry-picked in the wrong
order (despite the dependencies shown in Gerrit), causing the
QObjectData::unused bitfield to be too large.
Change-Id: I65acaa8b507f7f6f2c5735f45bd0ad8343abea54
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
