Tag them as [[maybe_unused]] to silence compiler on platforms where they
are not used.
Change-Id: I12243c0409c66863617f073f968e50f913c58a67
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Use a simpler constexpr to generate type name on gcc This
works around an ICE on gcc in release mode when compiling
with PCH enabled. As the type we're getting from Q_FUNC_INFO is
already in a somewhat normalized form, this requires significanlty
less processing and esp. not a recursive constexpr method which
I suspect triggers the ICE.
Fix integer type conversions to also properly normalize long long
values (to q(u)longlong. Make sure the mapping also works on
MSVC, where long long types get mapped to __int64. Also, normalize
unsigned short and unsigned char to ushort and uchar, respectively, to
follow the convention set by uint and ulong.
Add some test cases to verify the mappings.
Change-Id: I3dec5764450bf22ab6f066597803c3f46c2cd5ac
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
One can call addResult(value, index) twice and consequently set the
value twice by the same index. This seems rather strange and probably
should not be allowed. This commit rejects setting results when there's
already a valid result by that index. Consequently, this fixes memory
leaks caused by N-times-called addResult(..., index)
Fixes: QTBUG-86828
Change-Id: I77494f2cb73ce727ffad721cfcdcaa420899eb25
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
This reverts commit 7544c242cb, which
reverted the first removal of the parameter under the assumption
that it caused flakiness in tests.
The flakiness was instead caused by changes to the wait functions
in QTest, so remove the parameter again.
Change-Id: I98154d5d7268375aebbcb09de757e75d9b765c5f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This commit restricts operator<<(QDebug lhs, QVariant rhs) to only work
if rhs is actually of type QVariant (instead of any type convertible to
QVariant). This is especially important as
a) we check in QMetaType whether (slightly simplified) QDebug{} <<
std::declval<T>() is valid, and if so, register a function which
simply uses the operator.
b) In QVariant, we ask the metatype system for the contained types
registered debug function and then use it.
If a type now does not have its own operator<< for QDebug, but is
implicitly convertible to QVariant containing itself, this would lead to
an infinite recursion, when trying to use qDebug with that type. The
registered function in a) would just convert the type to QVariant, and
then ask the QVariant to print itself.
Disallowing implicit conversions in qDebug in general was considered
(i.e. adding template<typename T> operator<<(T) = delete in QDebug ),
but discarded as it breaks too much code relying on conversions.
Fixes: QTBUG-87122
Change-Id: Ib709297670cbc6cc307efd0dfd8e5b0279df9414
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QFuture::takeResult() currently returns std::vector instead of QList,
because QList does not support move-only types. Disable this method
until QList is fixed to work with move-only types in Qt 6.1.
Also did minor doc-fixes.
Change-Id: I87feaf75d9433a3b540edd00039c3e21d6994985
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
As propertyobservers can execute arbitrarily complex code, they can also
modify the obsever list in multiple ways. To protect against list
corruption resulting from this, we introduce a protection scheme which
makes the list resilient against modification.
A detailed description of the scheme can be found as a comment in
QPropertyObserverPointer::notify.
Task-number: QTBUG-87153
Change-Id: I9bb49e457165ddc1e4c8bbdf3d3c9fbf5ff27e94
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Implement the better rounding mechanism that was previously blocked
by requiring C++14 to be constexpr.
Change-Id: I4e5b179ce0703f5c0b41c3f0ea00d28dfe53740c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Pending results were never cleared by result store. This led to memory
leaks when the results never transitioned to "visible" results
Change-Id: I674302eb51542ad5f4d918da68d616428c73ae9f
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
It was previously casting enum values to int, which produced unhelpful
answers when a test failed. Better to have them as enum values that
get printed as their names, which are actually informative.
Change-Id: I1bf2971b1426bdbbc321bb48f45ee3e5799e76ec
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QDateTime's addDays(), addMonths() and addYears() neglected to check
for validity before doing their job, with the result that they could
produce "valid" (but wildly inappropriate) results if used on an
invalid date-time. Added tests for this case (and the boundary).
Change-Id: I7b0d638501cb5d875a678cde213547a83ed7529e
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDateTime's range of possible values is wider than anyone generally
needs, but let's not do confusing things when someone does overflow
it.
Change-Id: Ifbaf7a0f02cd3afe7d3d13c829bf0887eba29f7f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Previously, a QDate representing more than about 0.3 gigayears before
or after the epoch would overflow the millisecond count and produce a
"valid" date-time that didn't represent the date and time passed to
its constructor. Changed to detect such overflow and produce an
invalid date-time instead, if it happens.
Corrected some tests that wrongly expected to be able to represent
extreme date-time values with every time-spec. The (milli)seconds
since epoch are from UTC's epoch, so converting to another offset,
zone or local time may give a value outside the actual range. Added
some tests for the actual exact bounds.
Task-number: QTBUG-68855
Change-Id: I866a4974aeb54bba92dbe7eab0a440baf02124f0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Currently
A a;
QVariant::fromValue(&a).value<const A*>() == nullptr;
Still casting non const to const is safe, and worked in Qt5.
After this change
A a;
QVariant::fromValue(&a).value<const A*>() == &a;
Change-Id: I257049d084c712b00a338a2943d379aa478e0981
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Change types returned and accepted by capacity-related QArrayDataPointer
functions to qsizetype:
1) QArrayData (underlying d-ptr) works with qsizetype
2) QArrayDataPointer::size is of type qsizetype
3) All higher level classes that use QADP (e.g. containers)
cast capacity to qsizetype in their methods
Additionally, fixed newly appeared warnings through qtbase
Change-Id: I899408decfbf2ce9d527be7e8b7f6382875148fc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This time based on grepping to also include documentation, tests and
examples previously missed by the automatic tool.
Change-Id: Ied1703f4bcc470fbc275f759ed5b7c588a5c4e9f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Even before adding support for fractional hours, a fraction of a
minute might potentially have represented a whole number of seconds by
a fractional part that, due to rounding, was less than the whole
number of seconds by less than half a millisecond. Previously, the
parsing would have clipped the fractional part at 999 milliseconds, in
the preceding second, instead of correctly rounding it up to the whole
second.
For QTime::fromString(), which can't represent 24:00, and for
TextDate, which doesn't allow 24:00 as a synomym for the next day's
0:0, applying such rounding to 23:59:59.999999 would produce an
invalid result from a string that does represent a valid time, so use
the nearest representable time, as previously.
Added some tests and amended others.
[ChangeLog][QtCore][QDateTime] QDateTime and QTime, in fromString()
with format ISODate or TextDate, now allow a fractional part of the
hour, minute or seconds to round up to the next second (hence
potentially into the next minute, etc.) when this is the closest
representable value to the exact fractional part given. When rounding
up would turn a valid result into an invalid one, however, the old
behavior of clipping to 999 milliseconds is retained.
Change-Id: I8104848d246cdb4545a12819fb4b6755da2b1372
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Previously we used 0:0 on the next day, which might fall in a
fall-back's gap.
[ChangeLog][QtCore][QDateTime] When fromString() reads 24:00 in ISO
format, it now uses the start of the next day, rather than 0:0 on the
next day. This only makes a difference if the next day's first hour is
skipped by a time-zone transition.
Change-Id: Ib81feca5dc09fa735321b6ab76d5d118d6db6fd2
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Try to get rid of APIs that use raw 'const {char, QChar} *, length'
pairs. Instead, use QByteArrayView or QStringView.
As QStringConverter is a new class, simply change the API to what we'd like
to have. Also adjust hidden API in QStringBuilder and friends.
Change-Id: I897d47f63a7b965f5574a1e51da64147f9e981f6
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QUrl hostnames must be compliant with STD3, but we must somehow accept
file paths that begin with double slash but aren't valid hostnames.
Because the file URI spec requires us to start with "file://" anyway, we
can represent those with four slashes. Note that on Unix "//X/y" is a
valid but local file path. If given to QUrl::fromLocalFile(), if the
path at the root does parse as a hostname, we will still try to
normalize (the above becomes "file://x/y").
[ChangeLog][QtCore][QUrl] Changed QUrl::fromLocalFile() to accept
Windows UNC paths whose hostname component is not a valid Internet
hostname. This makes QUrl able to accept extended-length paths (\\?\),
device namespace (\\.\), WSL (\\wsl$), etc.
Pick-to: 5.15
Fixes: QTBUG-86277
Change-Id: I3eb349b832c14610895efffd1635759348214a3b
Reviewed-by: David Faure <david.faure@kdab.com>
No change in testing, juts changed names and order.
Pick-to: 5.15
Change-Id: I3eb349b832c14610895efffd16357498454bcd52
Reviewed-by: David Faure <david.faure@kdab.com>
Also add the very same operators to the QBasicUtf8StringView
class to overcome the compiler issues seen on gcc.
Fixes: QTBUG-86481
Change-Id: I12484455ebd3b7b38d4ad67c38977d76f9b3ddfa
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Also adjust the QString constructor from QByteArray to ignore
\0 characters in the string (and not terminate conversion there).
[ChangeLog][QtCore][QString] Constructing a QString from a QByteArray
will not stop at intermediate '\0' (null) characters in the string as
in Qt 5, but will convert all characters in the byte array.
Change-Id: I1f6bfefe76dfa9072b165903fec7aa4af1abd882
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Previously the ISO time format would tolerate trailing cruft at the
end in various cases even though there might be an offset specifier
after the time, which should *not* be separated from it by anything
(not even the spaces we originally planned to still tolerate).
The RFC date format is forgiving about space, as is suitable for
parsing of RFC-822 headers, but the other formats should match the
handling in QDateTimeParser, which rejects any dangling cruft.
At the same time, since this required a re-write of
fromIsoTimeString() in any case, add support for the ISO format that
gives the hour a fractional part and skips minutes and
seconds. Previously we only had support for fractional minutes (with
no seconds). The hour without even a fractional part is also valid.
Reworked the documentation of Qt::DateFormat as it was wrong in
places, inconsistent in its formatting and incomplete. Adjusted some
tests to match the new behavior. A fraction separator with no
following digits should have been recognized as an error previously
and now is.
[ChangeLog][QtCore][QDateTime] The ISODate and ISODateWithMs formats
now reject trailing cruft (including spaces) at the end of a time
string. They also gain support for parsing hour-only formats,
including the hour-with-fractional-part format.
Task-number: QTBUG-86133
Change-Id: I38ad1479ae033407f7df97ffbeb7c4bcd463d04a
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The name toSecsSinceEpoch() gave no hint to the fact that the test
was, in fact, *also* testing round-tripping of the ISODateFormat.
Since there are other tests for string conversion, make this a simple
test of toSecsSinceEpoch().
It did the round-tripping via two methods with overly-terse names that
might just as well be local lambdas - now redundant, so removed.
Change-Id: I1e4fb1cc90224312c995596a8f3fe2bc5d9dfa15
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Also drop superfluous trailing 0s from QTime's constructor and add
space after commas.
Change-Id: Ie3ae87fd497456d6447c55e5d2c808ef59c9768d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Since we drop the lock while deleting threads, we need to handle
the queue possibly being accessed and changed by the pool threads
while clear() is running.
Pick-to: 5.15
Fixes: QTBUG-87092
Change-Id: I7611edab90520454278502a58621e299f9cd1f6e
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Address an old ### Qt 5 comment. The method has been documented as deprecated
and replaced by QProcess::processId since at least Qt 5.9, so we can first
properly flag it as such for 5.15.2, and remove it from Qt 6 in a follow-up
commit.
Change-Id: Ic4e3351740617083b16723db8eef7a341bccfbf6
Pick-to: 5.15
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add begin()/end() on QRegularExpressionMatchIterator, making
iterators over an iterator (like directory_iterator).
[ChangeLog][QtCore][QRegularExpression] The iterator object
(QRegularExpressionMatchIterator) returned by a global match
is now usable in a range-based for loop.
Change-Id: If3d31bd2e84e7d1fb626a0b3d2745914dff03e39
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use std::hypot() instead of sqrt() of a sum of squares.
This ensures length() can't be zero when isNull() is false.
Use length() in QLine::setLength() rather than duplicating that.
Clarify and expand some documentation; isNull() never said what
constituted validity, nor did unitVector() mention that is should not
be used on a line for which isNull() is true. Make clear that lines of
denormal length cannot be rescaled accurately.
Given that we use fuzzy comparison to determine equality of
end-points, isNull() can be false for a line with displacements less
than sqrt(numeric_limits<qreal>::denorm_min()) between the coordinates
of its end-points (as long as these are not much bigger); squaring
these would give zero, hence a zero length, where using hypot() avoids
the underflow and gives a non-zero length. Having a zero length for a
line with isNull() false would lead to problems in setLength(), which
uses an isNull() pre-test, protecting a call to unitVector().
(It was already possible for a null line to have non-zero length; this
now arises in more cases.)
Restored QLine::setLength() to the form it had before a recent change
to avoid division by zero (which resulted from underflow in computing
the length of a non-null line) but allow for the possibility that the
unit vector it computes as transient may not have length exactly one.
Add tests against {ov,und}erflow problems in QLine. Reworked the test
added during the divide-by-zero fix to make it part of the existing
test.
Pick-to: 5.15 5.12
Change-Id: I7b71d66b872ccc08a64e941acd36b45b0ea15fab
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
To match QString and QByteArray behavior
Change-Id: Ifce4a5dee6fc9077e855a24499f11f911e359cf5
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
ChangeHandler's evaluated the binding to detect if the value actually
changed. This is a valid strategy for lazy bindings, but eager bindings
were already evaluated at that point, and thus the change would not be
detected.
Change the binding loop test, so that there isn't a fixpoint in the
binding loop, and we can still detect it. Changing the binding loop
detection code to deal with this case is left as an exercise for the
future.
Change-Id: Ia5d9ce2cd98a5780e69c993b5824024eb186c154
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The documentation of convert promised that “If the cast cannot be
done, the variant is still changed to the requested type”. This was not
the case so far, because we returned too early if canConvert returned
false.
This commit changes the behavior of the method to reflect its
documentation. The documented behavior seems more useful than the
alternative of not changing the metaType, at least for common use cases
inside qtdeclarative.
Change-Id: I09b5a5efb7344e76e93de278e35c7fb2b2f87dcd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The logic was complex and missed the UTF-8 UTF-8 case. It ended up
calling the UTF-8 to Latin1, resulting in an improperly-sorted
container, which in turn meant keys were not found when searched.
Fixes: QTBUG-86873
Pick-to: 5.15
Change-Id: I0d3ff441bec041728945fffd16379dec418637ca
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
We were missing 64-bit signed mul_overflow on 32-bit platforms and in
those where we did have it, the detection was awful (both for signed and
for unsigned). So if one of the parameters is a constant, we can
simplify the code generated.
Change-Id: Ia99afccf0c474e20b3ddfffd162a60d269eb1892
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The semantics are not very intuitive, and it opens a can of worms
with regards to what should happen with observers that observe
that property.
Change-Id: I6fb00b7693904b968224cc87d098bbd0ea776ba3
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
In the internal hash map implementation, we have to ensure that the
index is in the interval [0, size - 1].
Moreover, in setBinding we have to refetch the binding storage in case a
reallocation happened.
Change-Id: I11c6264f16537699c8908b647e2355a39ce87648
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Before we had the option of eager evaluation, we were able to use the
dirty flag to detect whether we are recursing. However, eager properties
will lead to a evaluateIfDirtyAndReturnTrueIfValueChanged call, and that
in turn will clear the dirty flag.
Introduce a new member to detect that situation, and set the bindings
error state to BindingLoop if we detect that kind of loop.
Change-Id: If40b93221848bd9e9422502318d992fad95b0b74
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
It was already used many places directly making the code inconsistent.
Change-Id: I3b14bc6c333640fb3ba33c71eba97e78c973e44b
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
In the past, string formatting and parsing was done in the users
locale. Now, the C locale is consistently used in QDate(Time) and
localized functions are offered in QLocale. This patch reflects
this change in the documentation.
Change-Id: I81afda9063fa232d06841d63f69e19b49f8083f3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDateTime's comparisons just compare milliseconds when both values are
local times and their statuses (hence DST-ness) match. It can do the
same for time-zones. While doing the same for UTC and fixed offsets
wins nothing, it also costs nothing, given that we're already checking
the spec.
Task-number: QTBUG-75585
Change-Id: Ib6d824569aba8def2f1319ef3a11cca6869a5b5e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add some unit tests using emojis as separator characters to check
utf handling.
Change-Id: I03c4bb5cd349e649c58e8a908c38a0185d80e722
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Modify special case locations to use the new API as well.
Clean up some stale .prev files that are not needed anymore.
Clean up some project files that are not used anymore.
Task-number: QTBUG-86815
Change-Id: I9947da921f98686023c6bb053dfcc101851276b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Binary provider:
It was not possible to remove the first glob in a local override,
because the mainPattern handling would re-add the first glob back.
XML provider:
It didn't support glob-deleteall.
Also, the order of the providers was wrong. We want to pick local
overrides first, the internal DB has to go last in the list.
Fixes: QTBUG-85436
Pick-to: 5.15
Change-Id: I9a4523f37cd962c730df9a6ed992bd01c075bf03
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Clean up the state of the projects,
before changing the internal CMake API function names.
Task-number: QTBUG-86815
Change-Id: I90f1b21b8ae4439a4a293872c3bb728dab44a50d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
tst_qguiapplication was missing an Info.plist file.
We can't directly reference the tst_qcoreapplication Info.plist
file like the qmake project does, because that breaks ninja
(says multiple rules create the same output file), so use a
copy instead.
Blacklist the qpluginloader loadMachO test when doing CMake builds.
The qmake projects use multiple custom rules to build the macho
plugins, which need to be ported to CMake.
Task-number: QTBUG-86053
Task-number: QTBUG-86792
Change-Id: Iaff2b2d5e9e84a457b4f2ffc011a580388498f00
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
MSVC has strange problems with it and we don't actually need it.
Change-Id: I2c443946d52d475208800f310b5f910da165c99b
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Changes the definition of invalid QRects to be more consistent.
This simplifies the logic, and makes it possible for us to fix
normalized() so dimensions don't change.
The actual API is not changed except for inverted rects.
Only one use-case for the old normalized() function existed,
and has been reimplemented as QRect::span().
Fixes: QTBUG-22934
Change-Id: I29dad2952dc6c8e84a6d931898dc7e43d66780f3
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Do not use QVariant::Type anymore, instead use QMetaType
For some reason, this pushed the qvariant autotest over the limit where
MSVC requires the /bigobj flag, so add that one.
[ChangeLog][QtCore][QMimeData] The signature of the virtual retrieveData()
function has changed and now takes a QMetaType instead of a QVariant::Type.
Change-Id: Ib46773bd731ee2177b1ef74d8162d744be7017ef
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Resolve remaining Qt6 TODO
[ChangeLog][QtCore][QAbstractEventDispatcher] The signature of the abstract virtual registerTime function now takes a qint64 value for the interval parameter.
Change-Id: I10166ad5cfb455edc404d465a3731ff094a8977e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
In order to modify a container through an iterable, we need the original
container to be mutable. The iterable, then, is not a conversion of the
container, but rather a view on the container. The concept may be
extended to other types.
In order to facilitate this, provide a set of methods in QMetaType and
QVariant similar to the convert family. The new methods are non-const
and expect the original value to stay available during the life time of
the view.
Change-Id: I363621033f7fc600edcea2acb786820ccba49c86
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
And add mutable iterators. This requires some refactoring of the
existing iterators.
Task-number: QTBUG-81716
Change-Id: I61b3a3e8c0df5fd449679257a29d9f0c3d19c4f0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The constructor taking an array literal will now stop at the first
null-terminator encountered.
And fromArray is introduced which only supports array literals.
Constructs a view of the full size. Explicit so it shouldn't be
surprising.
Change-Id: I1497c33a5c12453a95e87c990abe6335b2817081
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
1. Make the ctor unable to construct a QByteArrayView from
array literals other than 'char'.
With the new behavior it would either be (very likely) unintended to
pass e.g. a std::byte array to the ctor. And it would be confusing
because you would get different sizes based on signed-ness.
2. Introduce fromArray
Only supports array literals. Constructs a view of the full size.
Explicit so it shouldn't be surprising.
Change-Id: Ifdb55eb21057dfe7053b2561bd81e2c9825e9bc6
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Use QVERIFY in test functions, and (void)tr.load outside.
Change-Id: I18d2eb3aeaf00f9f2bbe75d0a2d8b12569b541e1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
It is lossy, so should be requested explicitly, using a dedicated
fromPixmap factory function.
Deprecate the constructor and assignment operator, and make the
constructor explicit.
[ChangeLog][QtGui][QBitmap] Implicitly constructing and assigning
to a QBitmap from a QPixmap has been deprecated, and the respective
constructor has been made explicit. Use the fromPixmap factory
function instead.
Change-Id: I68ce85b26c901415137b664a1db687021d48bae0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Change the rounding of negative half values to match standard C++
round, this will also allow future optimizations.
Change-Id: I8f8c71bed1f05891e82ea787c6bc284297de9c5c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When QCoreApplication object is instantiated, creation of the internal
message window is delayed until QEventDispatcherWin32::processEvents()
is called or socket/event notifier is registered. But, if the user uses
a native event loop, posted events are not delivered and timers do not
work.
This problem was fixed in a4ac4b3263 for
QWindowsGuiEventDispatcher in the same way. So, the risk of regression
is minimal.
Change-Id: I7bbb721d96046f64d21a7b0e553e46798b37189c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The test was previously using int; I shall be wanting to add tests
that exercise the bounds of qint64. Clean up the layout of the
test-row additions in the process of making a trivial change to them
all. Also const the QFETCH() types so we catch any use of non-const
methods on the values fetched.
Change-Id: I4b0187de71f5f14b39b4eabe8afd12a196f73d23
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Instead of using imprecise QTest::qSleep() to estimate the
elapsed time, we trigger a single shot PreciseTimer and
gather all the data in lambda. We wait for lambda to be
executed - we give it twice as much time as is in theory
needed. Afterwards we verify all the data collected in lambda.
Task-number: QTBUG-82903
Change-Id: I0147b7cd2aaf4bf58a216caff167d2db8712541a
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Some CMake files currently assume that QtGui is always enabled and we
get a configure-time failure without these changes.
Task-number: QTBUG-86053
Change-Id: I28e32c180c32221f32519017bac6b518a19d5983
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This requires refactoring of QMetaSequence, as they share a lot of
common functionality. QMetaAssociation provides a low level interface to
an associative container.
Task-number: QTBUG-81716
Change-Id: I273e00abd82f1549ba8803c323d82aa3a2d12ded
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
test.bjon file doesn't exist, however, it's still included in json.qrc.
That causes the test to fail on Android because it's using that resource
file.
Change-Id: I1e93076069073a1a621459a7d90aec5c0c03f768
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The macro BACKTRACE_HELPER_NAME is defined inside a block with
#ifdef __GLIBC__ which is not defined on Android, thus causing the test
to fail on Android.
Change-Id: I55e9b3e3bae2da182481239ad88107c36e3bd438
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This was overlooked when doing the conversion to use UTF-8 as the
standard 8 bit encoding for text.
Fixes: QTBUG-54942
Change-Id: Ib7b1b75b4d694648ab7143f6930b6bb1dcad19c9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It has been deprecated and will live in qt5compat from now on.
Fixes: QTBUG-86480
Change-Id: I3744c7cee058d51d0fce633a174ab1a0f9235d2c
Reviewed-by: Karsten Heimrich <karsten.heimrich@qt.io>
The seconds and milliseconds default to 0; so omit them when they're
zero, unless there's nearby code that contrasts nicely with them.
Change-Id: Iea049015e976f5a5209fe87a2cbfdae9de49a559
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
These were now always defined, hence redundant.
Leave the #define in place so that we can verify we actually do always
define it, in a #else of an existing #if check on it.
Change-Id: Iea4c3dbc8f9982268bcf81da5ef17fe2ebf5c462
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTime() is invalid. Only the seconds and milliseconds are optional,
for valid times. Use startOfDay() for zoned times, QTime(0, 0) for
fixed-offset ones.
Change-Id: I3b65d5c3733ac83dc3a6c214859c3f56a480bb94
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Nothing used defDateTime(), nothing but it used defTime(). The only
other use of defDate() were from one test, which might as well make it
a local variable.
QDateTime's default is invalid, making invalidDateTime() redundant,
and the invalidDate() and invalidTime() it called had no other users.
Change-Id: I0e07ee58478bfe8ba680eafb52e2f73a962edd33
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As per ### Qt6 comment. Also rename the LibraryLocation enum
to LibraryPath.
Change-Id: I556025a19c5bcdf2ff52598eaba32269522d4128
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We were starting to run out of space for builtin core types.
Remap the type id's to create lots of additional space.
We now reserve the first 64k id's for Qt, and have 16k id's for
Qt Core. That should hopfully be enough for a while ;-)
Fixes: QTBUG-85914
Change-Id: I0dab6bf23652e46a9557d9b38af7990b68c572b6
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
They were disabled in ad0e3e26fa,
but that was probably accidental.
Change-Id: Ia9cbccfbeecfe84768c3465f5699ed44b7f932a5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Provide functionality to add and remove values, so that you can use a
sequential iterable as stack or queue if the underlying container
supports this. To this end, provide a way to specify whether the
value should be added or removed at the beginning or the end of the
iterable.
Change-Id: If63d302f3ca085e56d601116ce4dfaa6b94a0c4f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
For completeness' sake we should expose this. The iterators provided by
QIterable and friends will check the category at runtime, and should give
sensible feedback.
Change-Id: I778894f340c862f79a18c6c5607bcbba98dd7598
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Test data for QDateTime unit tests was constructed in system's local
time, which made unit test outcome dependent on the time zone of the
system running the tests.
This led to failing unit tests on systems with libc6 version
2.31 or newer. A QDateTime in a timezone, which has daylight saving
time, was created and then used in Hawaii's time zone,which has no
daylight saving time. Newer glibc checks this and returns errors.
This patch changes the behavior to create the test data in a
specified time zone setting.
Task-number: QTBUG-80441
Change-Id: I0330b647fa011be99141dde09001ff2d58bd3a5f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This reverts commit f51b690e91.
The commit made all animation tests in qtdeclarative on macOS
flaky.
Change-Id: I4ccaa879df7e2ba7e253657de01cbabc9b2c655f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This is so that they are in line with the "value_type" usually found in
containers. Associative containers have "key_type" and "mapped_type" and
we will use those names for access to elements in QMetaAssociation.
Using "value" as name for sequential containers improves consistency.
Change-Id: I628b7e1446bb2d56843b843bca72d279a6b247e6
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Instead of doing string formating first and then using QTest::newRow,
we can do both at the same time using QTest::addRow
Change-Id: Ia5c90eb705a806e37b96a1fa174a6557f91bee6d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
To not have to bother with encodings, a few QStrings are changed
to QByteArrays. This way, a few calls to QString::fromLatin1 and
to QString::toLocal8Bit can be removed
Change-Id: Ia0cf27fc2a86f9842ed0f3ebe47b050bb8a3f4e6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Remove around 1000 compiler warnings about missing overrides
in our auto tests.
This significantly reduce the compiler warning noise in our auto
tests, so that one can actually better see the real problems
inbetween.
Change-Id: Id0c04dba43fcaf55d8cd2b5c6697358857c31bf9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Looks this is redundant in fact and unneeded. The check can never be
evaluated to true, since if so, it would mean it had failed in the
previous iteration, in which we already handled the exit from the loop.
Fixed also some comments.
Task-number: QTBUG-83419
Change-Id: I4fe56bfac39cd58b1166967f3ccb80cdff882748
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The removal of the QProcess::start(QString, OpenMode) leads to more
porting work than anticipated. A call like
QProcess p;
p.start(cmdline);
must be transformed in the following cumbersome way:
QProcess p;
QStringList args = QProcess::splitCommand(cmdline);
QString program = args.takeFirst();
p.start(program, args);
This patch revives QProcess::start(QString, OpenMode) and renames it to
QProcess::startCommand. This is still source-incompatible, but the
transformation is much simpler:
QProcess p;
p.startCommand(cmdline);
[ChangeLog][QtCore][QProcess] Added QProcess::startCommand(QString,
OpenMode) as replacement for the removed QProcess::start(QString,
OpenMode).
Change-Id: I5499bbb39a025e115042c43a4cc63affddae585c
Reviewed-by: hjk <hjk@qt.io>
Changed QString to use implicit element reserved by QArrayData
Task-number: QTBUG-84320
Change-Id: If517500b3f0e71bb8d2989c64815a634aa8dd554
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QDate was changed to consistently use the C local in
serialization and parsing in git commit
5ba66c5622.
This commit reflects this change in the unit tests.
Task-number: QTBUG-80441
Change-Id: Ib21a215ef0e36c9eaa2c161b92c6877a50ae6f06
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Updated moveNonPod function to behave correctly under
exceptions being thrown. This is the version that was implemented
at some point but then got changed prior to merge. Added tests for
moveInGrowthDirection (which uses moveNonPod in general case) to
verify that range movements are correctly done
Updated QCommonArrayOps access modifier from private to protected
to allow testing of internal stuff by subclassing
Task-number: QTBUG-84320
Change-Id: Idb994a72ee601762e32248670cdc7819aaca0088
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Scoped GrowsBackwards-optimized erase to only be applied
when erase starts at the beginning of the element range.
In other cases, old "left-shifting" erase is used to align
with std::vector::erase invalidation policy
Task-number: QTBUG-84320
Change-Id: I2e7f3b96b056bc371119eb2d36cc7c74af52c394
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before, we used not so accurate QTest::qWait(50)
to measure the accuracy of more precise timer's interval.
In addition, the checked range for remainingTime (50, 200)
was probably wrong, since by definition it couldn't be more than 150,
as we started the timer with interval of 200 and waited at least 50.
In this fix we have additional "tester" timer to measure remainingTime
of "tested" timer. The "tester" is a singleShot timer with interval of
50, and is started together with "tested" timer. Whenever the "tested"
timer timeouts, it restarts the "tester" timer - this is done desired
number of times (2 by default, like in the original test).
The test itself lies now inside tester's lambda. We fix the tested
range (at least 1, no more than 150). The minimum value could in
theory be greater, but it's enough to test that it's not overdue.
Finally, we wait for expected number of test runs. We give it twice
as much time as is in theory needed.
Task-number: QTBUG-83419
Task-number: QTBUG-58519
Change-Id: I43836d787d804f22bb66515ebb215d040189c4f3
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
[ChangeLog][Source-Incompatible Changes] QProcess::setupChildProcess()
was removed. To execute code in a child process, use
QProcess::setChildProcessModifier()
[ChangeLog][QtCore][QProcess] Added setChildProcessModifier() function
with which one can provide code to be run in the Unix child process
between fork() and execve(). With this function, it is no longer
necessary to derive from QProcess in order to execute actions in the
child process.
Another reason is that we can tell whether the std::function carries a
valid target much more easily than we can tell whether QProcess was
overridden.
The setupChildProcess() virtual function does not need to be marked
final, since no overrider could ever return an inaccessible private
class. This also makes sure the error presented to the user is about the
return type, not about attempting to override a final.
Clang:
error: virtual function 'f' has a different return type ('void') than the function it overrides (which has return type 'QProcess::Use_setChildProcessModifier_Instead')
GCC:
error: conflicting return type specified for 'virtual void MyProcess::setupChildProcess()'
note: overridden function is 'virtual QProcess::Use_setChildProcessModifier_Instead QProcess::setupChildProcess()'
ICC:
error: return type is neither identical to nor covariant with return type "QProcess::Use_setChildProcessModifier_Instead" of overridden virtual function "QProcess::setupChildProcess"
MSVC is not relevant since it doesn't compile to Unix.
Change-Id: Ia8b65350cd5d49debca9fffd15f801161363aea7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
QDateTime::toString uses the C locale since 5ba66c5622
So don't expect locale specific day- and month-names.
Task-number: QTBUG-80441
Change-Id: I08f53b6b33ed9e7eaaa58df4ca6a966c4ba9ef24
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Instead of QCoreApplication::quit() directly calling exit(0), which would
leave QGuiApplication and client code out of the loop, we now send the
Quit event, and let it pass through event delivery, before finally ending
up in QCoreApplication::event(), where we call exit(0).
This has the advantage that QGuiApplication can ensure all windows are
closed before quitting, and if any of those windows ignore the close
event the quit will be aborted. This aligns the behavior of synthetic
quits via QCoreApplication::quit() with spontaneous quits from the
platform via QGuiApplicationPrivate::processApplicationTermination.
Clients who wish to exit the application without any event delivery or
potential user interaction can call the lower level exit() function
directly.
[ChangeLog][QtGui] Application termination via qApp->quit() will now
deliver Quit events to the application, which in turn will result in
application windows being closed as part of the application quit,
with an option to cancel the application quit by ignoring the close
event. Clients who explicitly want to exit the application without
any user interaction should call QCoreApplication::exit() explicitly.
Task-number: QTBUG-45262
Task-number: QTBUG-33235
Task-number: QTBUG-72013
Task-number: QTBUG-59782
Change-Id: Id4b3907e329b9ecfd936fe9a5f8a70cb66b76bb7
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Make QTBF ready for Qt6 by using qsizetype in the API and use
QStringView where it makes sense.
Change the exported API of qunicodetools to use QStringView as
well and use char16_t internally.
Change-Id: I853537bcabf40546a8e60fdf2ee7d751bc371761
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Calibrated to match F16C and ARM-FP16 hardware conversions.
Change-Id: I3bdd4d3db3046fee4aeb24e4ce8b9bc9a06e0397
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Just starting 20 threads to test this won't cut it if
the machine you're testing on has an ideal thread count
of 16 or larger.
Change-Id: Icba8f00aa836fec6da41c71b318e9e17bdd47c0e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Since waiting for a spy employs polling, it may happen
that while waiting for a startedSpy we had received already
a signal for finishedSpy. This explains current flakiness.
The fix is to connect to lambdas instead and update
the hit count accordingly. Inside lambdas we also
ensure the correct order for started / finised signals.
After waitForFinished() unblocks we ensure that possible
pending asynchronous signals (started / finished) are processed
and check the final state.
Task-number: QTBUG-83076
Change-Id: I16963ef9c011cb613d7b409d3e3032303a942336
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Addresses ### Qt 6 comment, and documentation pointing out that the parameter
value is ignored. It wasn't ignored in the code, but that's the kind of change
we can make now.
With this change, QUnifiedTimer::updateAnimationTimers is only called with -1
as the currentTick input parameter, also from Qt Declarative. Make it default,
so that leaf modules can be fixed. Once that it done, the parameter can be
removed completely.
Change-Id: I80c57ff92f3b615b932dd73d711cf6397347efd8
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
C++20 via P1120 is deprecating arithmetic operations between
unrelated enumeration types, and GCC 10 is already complaining.
Hence, these operations might become illegal in C++23 or C++26 at
the latest.
A case of this that affects Qt is in key combinations: a
QKeySequence can be constructed by summing / ORing modifiers and a
key, for instance:
Qt::CTRL + Qt::Key_A
Qt::SHIFT | Qt::CTRL | Qt::Key_G (recommended, see below)
The problem is that the modifiers and the key belong to different
enumerations (and there's 2 enumerations for the modifier, and one
for the key).
To solve this: add a dedicated class to represent a combination of
keys, and operators between those enumerations to build instances
of this class.
I would've simply defined operator|, but again docs and pre-existing
code use operator+ as well, so added both to at least tackle simple
cases (modifier + key).
Multiple modifiers create a problem: operator+ between them yields
int, not the corresponding flags type (because operator+ is not
overloaded for this use case):
Qt::CTRL + Qt::SHIFT + Qt::Key_A
\__________________/ /
int /
\______________/
int
Not only this loses track of the datatypes involved, but it would
also then "add" the key (with NO warnings, now its int + enum, so
it's not mixing enums!) and yielding int again.
I don't want to special-case this; the point of the class is
that int is the wrong datatype. Everything works just fine when
using operator| instead:
Qt::CTRL | Qt::SHIFT | Qt::Key_A
\__________________/ /
Qt::Modifiers /
\______________/
QKeyCombination
So I'm defining operator+ so that the simple cases still work,
but also deprecating it.
Port some code around Qt to the new class. In certain cases,
it's a huge win for clarity. In some others, I've just added
the necessary casts to make it still compile without warnings,
without attempting refactorings.
[ChangeLog][QtCore][QKeyCombination] New class to represent
a combination of a key and zero or more modifiers, to be used
when defining shortcuts or similar.
[ChangeLog][Potentially Source-Incompatible Changes] A keyboard
modifier (such as Qt::CTRL, Qt::AltModifier, etc.) should be
combined with a key (such as Qt::Key_A, Qt::Key_F1, etc.) by using
operator|, not operator+. The result is now an object of type
QKeyCombination, that stores the key and the modifiers.
Change-Id: I657a3a328232f059023fff69c5031ee31cc91dd6
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Traditionally when calling reserve it's because you expect to append
up to X amount of bytes. We should keep that behavior the same.
With another patch still in the works current behavior caused an issue
with QStringBuilder in QNAM, as mirrored in the testcase attached.
Change-Id: I9792a8f158fc9235e3de48ac8b06ac2c10e7f3dc
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Views / delegates absolutely *adore* hammering data(). A simple
QListView showing a couple of dozens entries can call data()
a hundred of times on the first show.
Back of the hand calculation,
* 2 times per visible item (sizeHint() + paint()),
* times 9 roles used by the default delegate,
* times 20 visible items
= 360 as a bare minimum, assuming the view doesn't redraw twice
accidentally. Move the mouse over the view, and that'll cause
a full update with certain styles: 360 calls to data() per update.
This has an overhead visible in profilers. The model's data()
has to re-fetch the index from its data structure and extract
the requested field every time.
Also, QVariant is used for the data interexchange,
meaning anything that won't fit in one is also a memory allocation.
This problem will likely be gone in Qt6Variant as that
will store sizeof(void*) * 3, meaning QImage/QPixmap and similar
polymorphic classes will fit in a QVariant now...
So I'm trying to to remove part of that overhead by allowing
views to request all the data they need in one go. For now,
one index a a time.
A view might also store the data returned. The idea is that
the same role on different indexes will _very likely_
return variants of the same type. So a model could move-assign
the data into the variant, avoiding the memory allocation
/deallocation for the variant's private.
This patch:
1) Introduces QModelRoleData as a holder for role+data.
2) Introduces QModelRoleDataSpan as a span over QModelRoleData.
The idea of a span type is twofold. First and foremost, we are
in no position to choose which kind of container a view should
use to store the QModelRoleData objects for a multiData() call;
a span abstracts any contiguous sequence, leaving the view free
to do whatever it wants (statically allocate, use a vector, etc.).
It also solves the problem of efficient passing the roles and
gathering the returned variants from multiData().
3) Add multiData(), which populates a span of roles for a given
model index. The main advantage here is that a model can fetch
all the needed information for a given index just once, then
iterate on the span and provide data for each requested role.
Cf. this with data(), where every call has to re-fetch
the information for the index.
A couple of models have been ported to multiData(), as well as
QStyledItemDelegate.
[ChangeLog][QtCore][QModelRoleData] New class.
[ChangeLog][QtCore][QModelRoleDataSpan] New class.
[ChangeLog][QtCore][QAbstractItemModel] Added the multiData()
function.
Change-Id: Icce0d108ad4e156c9fb05c83ce6df5f58f99f118
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
So far QPropertyAlias was limited to working with QProperty<T>.
Change the implementation, so it can be constructed from any
property or even a QBindable<T>.
Change-Id: I175cffe94a9ef332367d39faa976eb065b0e6ffe
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Add a new BINDABLE declaration to the Q_PROPERTY() macro that tells moc
where to find the QBindable for the property.
Add a QUntypedBindable base class to QBindable<T> that gives access to
generic functionality and checks argument compatibility at runtime.
QBindable<T> will still do static checking at compile time.
Add QMetaProperty::isBindable() and QMetaProperty::bindable()
to be able to dynamically access the binding functionality.
Change-Id: Ic7b08ae2cde83fd43e627d813a886e1de01fa3dc
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Add a compatibility property class that makes porting to the new
property system as simple as possible.
Binding evaluation for those compat properties is eager, as we
do not control possible side effects of the code in the existing
setters.
Change-Id: Ic56347abb49e40631ec73e88c6d40d4bdb05ca29
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Add a QObjectComputedProperty. This class doesn't store the data
itself, instead relies on a getter method to compute it's value.
As the property is read-only, one can not bind to it, but it can
be used in other property bindings.
Change-Id: I0f6bffdd9f80f1d0829826f93a47257f2b3127af
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Add Q_OBJECT_BINDABLE_PROPERTY() macro that can be used to define
a bindable property inside QObject.
The macro and the class behind it creates storage for a property
that is bindable inside a QObject or QObjectPrivate. The property
only uses as much space as the data contained, ie. it has no
storage overhead, as long as no bindings are being used.
Bindings are being stored and looked up in the QBindingStorage
associated with the owning object.
Change-Id: I1dadd7bddbad6fbf10cfa791d6461574b9db82dd
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Add a private QBindableInterface and a public QBindable<T>
class, that will be the API interface for accessing bindings
for properties in QObject.
The QBindable class gives access to all aspects of
the property related to bindings. This includes setting
and retrieving bindings, installing observers and creating
a direct binding on this property.
Change-Id: Iaead54d2bd6947bd2cda5052142b2a47dd8bf7c4
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
These look rather weird, an explicit property.setBinding() call
is simply better in this case, and also more aligned with the API
we can offer in QObject.
Change-Id: Ifb00fd47a75e6b3bc94e34bf49e4f13249565bfe
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
And all related functionality. This is being replaced by
Q_BINDABLE_PROPERTY and Q_OBJECT_BINDABLE_PROPERTY in the
next few commits. The new infrastructure coming will play
nicer along with the existing property system.
Commented out some autotests, that will get reimplemented
with the updated infrastructure.
Change-Id: I50c30bd4d5c6c6b6471f8eb93870e27d86f5a009
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Rename QPropertyBase to QPropertyBindingData, as it contains the
data related to bindings. The new name fits better, as the data
can now also live somewhere else than the data strored in the
property.
Change-Id: I489efb86ad2e0bad2740c9d1aa74506fe103d343
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Since we will be storing property data differently in most cases,
having this special case would create too many additional complications.
Change-Id: I27042b0730559bb375d8e3c07324398403a9885d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Enable the arrow operator for all types that could have members, so
that one can e.g. write myStringProperty->size() instead of having to
use the less convenient myStringProperty.value().size().
Also cleaned up the rvalue ref overloads to be
disabled for basic types. For those we now also
return by value, for more complex types we
return a const reference.
Change-Id: If6a75898dc0a097f57052488f0af0cd7166b3393
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
If one needed to listen to a signal just once, one had to
store the QMetaObject::Connection object returned by connect()
and use it to disconnect the slot after the first signal
activation.
This has led to a proliferation of using wrappers (and enough
TMP); they usually look like this:
1) create a shared_ptr<QMO::Connection>, allocating its payload;
2) create a lambda, capturing the shared_ptr by value;
3) in the lambda, disconnect the connection (through the shared_ptr),
and call the actual slot;
4) connect the signal to the lambda, storing the returned
QMO::Connection into the shared_ptr.
This is expensive, error prone for newcomers, and tricky to
support as a general facility inside one's projects.
We can do better, just support single shot connections right
in QObject.
[ChangeLog][QtCore][QObject] Added the Qt::SingleShotConnection
flag. When a connection is established with this flag set,
the slot is going to be activated at most once; when the signal
is emitted, the connection gets automatically broken by Qt.
Change-Id: I5f5feeae7f76c9c3d6323d841efba81c8f98ce7e
Fixes: QTBUG-44219
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
One could guess it by assuming that disconnecting for a destroyed
receiver and disconnect() with given receiver use the same
implementation, but without closely knowing the implementation a
reader of the documentation can't know for sure.
Also add a test to prove that what the new documentation says is
really true.
Also remove an unnecessary negation in the preceding sentence.
Change-Id: I9d24442bb1a4646b89f969bad1a4d0e1eafa7534
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This is in line with QMetaType and will be used to implement a mutable
QSequentialIterable. Later on, a QMetaAssociation will be added as
well, to implement a mutable QAssociativeIterable.
The code here represents the minimal set of functionality needed to have
a practical sequential container. The functionality is not completely
orthogonal. In particular, the index based operations could be
implemented in terms of iterator-based operations.
Task-number: QTBUG-81716
Change-Id: Ibd41eb7db248a774673c701549d9a03cbf2e48b6
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
We need to add these two classes at the same time, because
QAnyStringView makes all QUtf8StringView relational operators moot. We
might want to add some later, esp. for UTF-8/UTf-8 comparisons, to
avoid the pessimization that we can't early-out on size() mismatch in
QAnyStringView equality operators, but that's an optimization, not a
correctness issue, and can be fixed in a source-compatible way even
after Qt 6 is released.
To deal with the char8_t problem in C++20, make QUtf8StringView a
class template out of which two UTF-8 views can be instantiated: the
Qt 7 version, which depends on C++20 char8_t as value_type, and the Qt
6 version where value_type is a char. Use inline namespaces to map the
QUtf8StringView identifier to one or the other, depending on the C++
version used to compile the user code. The inline namespace names must
needs be a bit ugly, as their inline'ness depends on __cpp_char8_t. If
we simply used q_v1/q_v2 we'd be blocking these names for Qt inline
namespaces forever, because it's likely that inline'ness of other
users of inline namespaces in Qt depends on things other than
__cpp_char8_t. While inline'ness of namespaces is, theoretically
speaking, a compile-time-only property, at least Clang warns about
mixed use of inline on a given namespace, so we need to bite the
bullet here. This is also the reason for the QT_BEGIN_..._NAMESPACE
macros: GCC is ok with the first declaration making a namespace
inline, while Clang warns upon re-opening an inline namespace as a
non-inline one.
[ChangeLog][QtCore][QUtf8StringView] New class.
[ChangeLog][QtCore][QAnyStringView] New class.
Change-Id: Ia7179760fca0e0b67d52f5accb0a62e389b17913
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Since 5.0: assignment/construction from QObject pointer
Since 5.14: data() to recover the packaged pointer
Change-Id: I5d6ab561ce39bc0d9d3e5035eb2ca38139cd76b6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The Unicode table code can only be safely called on valid code-points.
So code that calls it must only pass it valid Unicode data. The string
iterator's Unchecked Unchecked methods only provide this guarantee
when the string being iterated is guaranteed to be valid UTF-16; while
client code should only use QString, QStringView and friends on valid
UTF-16 data, we have no way to be sure they have respected that.
So take the few extra cycles to actually check validity in the course
of iterating strings, when the resulting code-points are to be passed
to the Unicode table look-ups. Add tests that case mapping doesn't
access Unicode tables out of range (it'll trigger the new assertion).
Added some comments to qchar.h that helped me understand surrogates.
Change-Id: Iec2c3106bf1a875bdaa1d622f6cf94d7007e281e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add Q_REQUIRED_RESULT to force callers to check the return; the
QTranslator object is unusable if load() fails.
Check the result in QTranslator's own test.
Task-number: QTBUG-85700
Change-Id: I07509c76470cc87626190670665cd3162bfb17e7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
A large slice of it has been deprecated since 5.2.
Reflowed a doc paragraph pointed out, in the deprecation commit, as
having been left ragged by its edits.
Note: qSwap() is documented as \deprecated but not marked, where it's
defined, as deprecated.
Change-Id: Iaff10ac0c4c38e5b85f10eca4eedeab861f09959
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
PCRE2 already uses size_t which we can now make full use of.
Change-Id: Icb5efd5c6ef27f2e31a9780bf62f5671ddc603cd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As there is now a chance that a QMetaMethod already contains the
metatypes for its arguments, we can just query it directly (and use the
fallback to name lookup logic that already exists there).
This also allows us to avoid creating a QList of names, and only
requires us to do a name lookup in case the connection actually fails.
Change-Id: Idda30bc4b538a94476ae6c533776c22340f0030d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
I don't think we want to have implicit conversion
from a const char * or a QByteArray to a QUuid.
Change-Id: Idfe7450ce15b89e295aa7af7ccf1fc94f5acd4f9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Restored previously deleted logic of setting GrowsBackwards flag for
prepend-like cases. This should be sufficient to fully enable prepend
optimization
Fixed QList::emplace to not use implementation detail logic. Updated
tests to cover changed behavior and its correctness
Task-number: QTBUG-84320
Change-Id: I4aadab0647fe436140b7bb5cf71309f6887e36ab
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Introduced prepend optimization logic to QCommonArrayOps.
Trying to rely on original QList behavior
Task-number: QTBUG-84320
Change-Id: I46e6797b4edad804a3e3edb58307c9e96990fe01
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Introduced allocation function in QArrayDataPointer with
interface similar to QArrayData::allocate that supports growing
strategies. This func is used instead of the original in cases
when prepend-aware storage is needed. Tried to follow Qt5 QList
policy in terms of space reservation
Updated QPodArrayOps::reallocate to be aware of growing
shenanigans. It doesn't look like a perfect solution but it is
rather close and similar to what Qt6 QList is doing when not
growing (e.g. reserve/squeeze)
Added initial QCommonArrayOps with helper function that tells
when reallocation is preferable over just using the insert-like
operation. This comes up later on when GrowsBackwards policy is
properly supported in operations
Essentially, 2/3 main data management blocks for prepend optimization
are introduced here. The last one being a generalized data move that
is done instead of reallocation when existing free space is not enough
Task-number: QTBUG-84320
Change-Id: I9a2bac62ad600613a6d7c5348325e0e54aadb73d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Currently QFuture::waitForFinished() exits as soon as the future is not
in the running state. If the user calls it before
QPromise::reportStarted() is called, it will exit immediately, because
nothing is running yet. Fix the behavior to wait for the finished state.
[ChangeLog][Important Behavior Changes][QtCore] Fixed the behavior of
QFuture::waitForFinished() to wait until the future is actually in the
finished state, instead of exiting as soon as it is not in the running
state. This prevents waitForFinished() from exiting immediately, if at
the moment of calling it the future is not started yet.
Task-number: QTBUG-84867
Change-Id: I12f5e95d8200cfffa5653b6aa566a625f8320ca8
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QString still has the overloads of relational operators taking
QByteArray. Add back QByteArray's relational operators taking
QString for symmetry. See also the comments of
d7ccd8cb45 for more details.
[ChangeLog][EDITORIAL] Remove the changelog about QString/QByteArray
operators being removed. They're back.
Change-Id: I22c95e727285cf8a5ef79b3a4f9d45cb66319252
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QCoreApplication has a special internal mechanism to control whether
the event dispatcher should block after delivering the posted events.
To handle queued connections in nested loops properly, we should use
that functionality.
Pick-to: 5.15
Fixes: QTBUG-85981
Change-Id: I124179a23b26a995cf95ed379e97bfa62c95f42a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
First, use QT_MKDIR instead of QFileSystemEngine::createDirectory(), as
the latter can't create a directory with the right permissions. That
would allow an attacker to briefly obtain access to the runtime dir
between the mkdir() and chmod() system calls.
Second, make sure that if the target already exists that it is a
directory and not a symlink (even to a directory). If it is a symlink
that belongs to another user, it can be changed to point to another
place, which we won't like.
And as a bonus, we're printing more information to the user in case
something went wrong. Sample outputs:
QStandardPaths: runtime directory '/root' is not owned by UID 1000, but a directory permissions 0700 owned by UID 0 GID 0
QStandardPaths: runtime directory '/dev/null' is not a directory, but a character device, socket or FIFO permissions 0666 owned by UID 0 GID 0
QStandardPaths: runtime directory '/etc/passwd' is not a directory, but a regular file permissions 0644 owned by UID 0 GID 0
QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-tjmaciei'
QStandardPaths: runtime directory '/tmp/runtime-tjmaciei' is not a directory, but a symbolic link to a directory permissions 0755 owned by UID 1000 GID 100
Pick-to: 5.15 5.12 5.9
Change-Id: Iea47e0f8fc8b40378df7fffd16248b663794c613
Reviewed-by: David Faure <david.faure@kdab.com>
The convenience API used to look up the index of a named capturing
group expects NUL terminated strings. Therefore, we can't just
use it together with QStringViews, which may be not. Use the
non-convenience API instead.
Pick-to: 5.15
Change-Id: I25ca14de49b13ee1764525f8b19f2550c30c1afa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove QTypeInfo::isStatic, as that's not used anymore in Qt 6.
Also remove sizeOf, it's unused, and we have QMetaType for that if
required.
Remove all typeinfo declaractions for trivial types, as the default
template covers them correctly nowadays.
Finally set up a better default for isPointer, and do some smaller
cleanups all over the place.
Change-Id: I6758ed37dfc701feaaf0ff105cc95e32da9f9c33
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
While it could be done before it's nice to not have a custom "local"
struct or the size in an out-parameter.
Change-Id: Ie910f7060b1dadf037312d45e922f8e2deafe3ec
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Better to provide the correct meta type to convert to.
Change-Id: I8e0d46e4ba482186201c157e302c03874bd38e7b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
And remove one of the type id to name mapping that still
existed in QMetaType. QMetaTypeInterface can provide that,
so there's no need to have a second copy of the data.
qMetaTypeTypeInternal() can still map all the names of all
builtin types to ids. That functionality is for now still
required by moc and can't be removed yet.
Change-Id: Ib4f8e9c71e1e7d99d52da9e44477c9a1f1805e57
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
It's only used for dynamic types in DBUS and QML, where we control
things good enough to be able to handle the lifetime of those
interfaces there.
Change-Id: Ia7f8970d17a85b195db85fcdc2d8f1febd8753f4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Those were not yet supported by QMetaType.
Change-Id: I9f85476049f200e35939ac58ef7e8b4e7cbe0b77
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Use the fact that we return the conversion function as a lambda
to find out reliably whether a conversion between two types
can be done.
This requires some minor adjustments to our tests:
* Nothing can convert to an unknown type and vice versa
* Adjust results to the fact that we don't convert from char
to QString anymore (where the old method was incorrect)
* QStringList->QString requires some adjustments, as we only
convert if the string list has exactly one element. For now
we return true in canConvert(), but the conversion behavior
in this case is something we should rethink, as it is very
surprising.
Change-Id: I3f5f87ee9cb99d690f5a7d13b13d6a6313d8038e
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Take the opportunity to properly handle the underlying type
(size and signed vs unsigned).
Change-Id: I0cb8cf40acac6de03c24ed3fe570db68268952c8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This will ensure full symmetry in what QVariant and
QMetaType support. With this done, QVariant will become
simply a container that can hold any QMetaType with fully
symmetric functionality between both.
Change-Id: I796d4368a2bc0f08cf4f70f4465ed6a0e07bdd76
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
There's no point in storing small types with an external
refcount, even if they aren't movable. Simply copying
the type should be faster in pretty much all cases, while
this uses less memory.
Change-Id: I127474f8e3c5fa042f530684f9d5bfccbba134ca
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Refactor the methods retrieving data in Q*Iterable so
that we don't return pointers with unclear ownership. Instead,
copy the data into a out pointer provided by the caller.
This also means there is no need for the metatype flags
anymore and we can remove those.
Change-Id: I517de23a8ccfd608585ca00403aca0df2955f14b
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Store a QMetaType, not a meta type id in the classes.
Change-Id: If27a60512a46fa029cc914d65b8cad7f89d7f3b0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove the old revision of the interface, this is not
required with Qt 6 anymore, as everything is being
recompiled anyway.
Change-Id: I66070c4dc6b5e2a6d22f5a9ebea7688ed38333fe
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
And remove the old manual registration code for those operators.
Add some special handling for long/ulong, as these types could be
streamed as a QVariant so far, but are not directly streamable
through QDataStream.
[ChangeLog][QtCore][QMetaType] The QMetaType::registerStreamOperators()
and QMetaType::registerDebugStreamOperator() methods have been
removed. The streaming operators for a type are now automatically
registered together with the type registration. This implies that the
operators should be visible wherever the type is visible and being used.
[ChangeLog][Behavior Incompatible Changes] Because the QDataStream and
QDebug serialization operators are automatically registered with
QMetaType, the declarations of those functions must be present at any
point where the type is used with QMetaType and QVariant.
Change-Id: I4a0732651b20319af4a8397ff90b848ca4580d99
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reduce the scopes so that also the result of 1-arg-sliced() can be
called 'sliced'.
Change-Id: Ie156f76838f8650d6926d3c198007aaf12f90734
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QLatin1String::mid() etc were changed from narrow to wide contract,
but the narrow-contract replacements weren't added. This blocks using
the narrow-contract functions in QStringTokenizer.
As a drive-by, Q_REQUIRED_RESULT -> [[nodiscard]] and Q_DECL_CONSTEXPR
-> constexpr. Also centralize most Q_ASSERT()s in a single function,
verify(), in an attempt to reduce the amount of string data generated
from the asserts in assertive builds.
[ChangeLog][QtCore][QLatin1String] Added from(), sliced(), first(n),
last(n) functions.
[ChangeLog][QtCore][QLatin1String] size_type/size() is now qsizetype
(was: int). This makes QLatin1String(ptr, 0) ambiguous now between the
(ptr, ptr) and (ptr, qsizetype) constructors.
Change-Id: Ie195f66ae1974eb0752c058aa9f3b0853ed92477
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The serialization code neglected to check against null. Sinze zones
are saved either by IANA ID or in our special OffsetFromUtc format,
representing an invalid zone by a string that cannot possibly be a
valid IANA ID will do.
Fixes: QTBUG-86019
Pick-to: 5.15
Pick-to: 5.12
Change-Id: I6882026403d00f8b254aab34c645f1cf8f9fcc2d
Reviewed-by: Taylor Braun-Jones <taylor@braun-jones.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
setFilterRegExp retains the caseSensitivity() while setFilterRegularExpression did not.
Change setFilterRegularExpression to also retain the case sensitivity.
Fixes: QTBUG-83313
Pick-to: 5.15
Change-Id: I46f494d320aee99d50612f01f63558c693276989
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: David Faure <david.faure@kdab.com>
MidButton had its // ### Qt 5: remove me
upgraded to Qt 6 at 5.0; but it dates back to 4.7.0
Replace the many remaining uses of MidButton with MiddleButton in the
process.
Pick-to: 5.15
Change-Id: Idc1b1b1816673dfdb344d703d101febc823a76ff
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Export some private functions from QUtf8 to resolve
undefined symbols in Qt5Compat after moving QStringRef.
Task-number: QTBUG-84437
Change-Id: I9046dcb14ed520d8868a511d79da6e721e26f72b
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The string representation of std::pair<T1,T2> is now always
"std::pair<T1,T2>". This is in line with how we translate QPair,
avoiding typename mismatches that would previoulsy occur, because the
full name of pair on libc++ was "std::__1::pair".
Fixes: QTBUG-84924
Change-Id: Ia6c044a7327d69e4b4f4a31496c6b2408d85ebb9
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Just like any other container, it's legitimate for the user to
pass key/values belonging to the same container.
Q(Multi)Map::remove(Key) are already safe (either they call
erase() directly on std::(multi)map, where it does the right thing,
or they skip elements while detaching).
However, QMultiMap::remove(Key, T) wasn't safe in this regard
(the implementation is hand rolled), so take copies before start
erasing.
Change-Id: I87767d608b83216a6ff264fb6c8f145fdb5934f8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Added functions that tell how much free space is available at the
beginning and at the end of the storage
Updated preconditions of operations to use freeSpace* functions
Also, changed casts uint(this->size) to size_t(this->size)
Task-number: QTBUG-84320
Change-Id: Iad94c1060a00f62068da9d1327e332a00d4f4109
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Refactored certain bits of qarraydataops.h: picked exception-related
building blocks and put them into one place, (somewhat) documented
the usage, added tests
Personally, the existing code seemed rather complicated to analyze
(and do mental experiments for corner cases), especially when staring
at the whole thing for a while or "returning back" from some other work
and I still have my doubts that everything works correctly. Testing the
building blocks that are used should:
a) increase trust into existing code (provided the usage is correct)
b) give more use cases of how to use the building blocks, which in turn
would allow to compare and contrast tests vs implementation
Task-number: QTBUG-84320
Change-Id: I313a1d1817577507fe07a5b9b7d2c90b0969b490
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Updated insert() methods:
* Refined Q_ASSERT() checks
* Fixed implementation issues (some of which resulted in
actual crashes)
* Allowed to insert at the end. This is safe as far as I can
tell and actually would allow to simplify considerable chunks
of code (mainly, copyAppend versions to just return
insert at the end)
Updated tests accordingly
Change-Id: I0ba33ae5034ce8d5ff95b753894e95d71ba00257
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Extended existing tests with QArrayData's allocation options
Added extra tests on array operations covering append, insert,
emplace, erase and truncate. "Raw" QArrayDataPointer is used instead of
test-specific SimpleVector to check the behavior without some custom
logic in-between
The change targets future updates to array operations in the light of
prepend optimization: as the array operations would become more complex,
these tests should give a much better coverage (specifically due to
likely non-trivial implementation details and optimizations)
Task-number: QTBUG-84320
Change-Id: I6581e2cb48f81b82ee5052d1dcea3da2819df47a
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Check that we can successfully instantiate the data
stream operator for a container before we actually try.
This is required so we can automate registration of debug
stream operators with QMetaType.
Change-Id: Ib100a5242470d7fc8067058cc4d81af2fa9354b0
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Check that we can successfully instantiate the debug
stream operator for a container before we actually try.
This is required so we can automate registration of debug
stream operators with QMetaType.
Change-Id: I3943e7a443751d250c33b2ca1b9cf29207cfe6c4
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
It was marked internal anyway. Use the constructor taking a
QMetaType instead.
Change-Id: I15b9cd0911aac063a0f0fe0352fa2c84b7f7c691
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Both normal and relaxed constexpr are required by our new minimum of
C++17.
Change-Id: Ic028b88a2e7a6cb7d5925f3133b9d54859a81744
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
A few new files were added with old-school defines.
Change-Id: Ieb2c71e094e55102f3f39fb9551823f36863f5f4
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
After reimplementing Qt JSON support on top of CBOR, there were
unintended behavior changes when converting QVariant{, List, Map} to
QJson{Value, Array, List} due to reusing the code for converting
QVariant* types to CBOR types, and from CBOR types to corresponding JSON
types. In particular, conversions from QVariant containing QByteArray to
JSON has been affected: according to RFC 7049, when converting from
CBOR to JSON, raw byte array data must be encoded in base64url when
converting to a JSON string. As a result QVariant* types containing
QByteArray data ended up base64url-encoded when converted to JSON,
instead of converting using QString::fromUtf8() as before.
There were also differences when converting QRegularExpression.
Reverted the behavior changes by adding a flag to internal methods for
converting CBOR to JSON, to distinguish whether the conversion is done
from QVariant* or CBOR types. These methods now will fall back to the old
behavior, if the conversion is done using QJson*::fromVariant*().
Additionally fixed QJsonValue::fromVariant conversion for NaN and
infinities: they should always convert to QJsonValue::Null. This works
correctly when converting from variant to QJsonArray/QJsonObject, but has
been wrong for QJsonValue.
Added more tests to verify the expected behavior.
[ChangeLog][Important Behavior Changes] Restored pre-5.15.0 behavior
when converting from QVariant* to QJson* types. Unforeseen consequences
of changes in 5.15.0 caused QByteArray data to be base64url-encoded; the
handling of QRegularExpression was also unintentionally changed. These
conversions are now reverted to the prior behavior. Additionally fixed
QJsonValue::fromVariant conversions for NaN and infinities: they should
always convert to QJsonValue::Null.
Fixes: QTBUG-84739
Change-Id: Iaee667d00e5363906eedbb67948b7b39c9d0bc78
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
isNull() would forward to the contained type and check that type's
isNull() method for some of the builtin types. Remove that behavior
and only return true in isNull(), if the variant is invalid, doesn't
contain data or contains a null pointer.
In addition, implement more consistent behavior when constructing
a QVariant using the internal API taking a copy from a void *.
isNull() should return true in both cases. This mainly changes behavior
for some corner cases and when using our internal API.
[ChangeLog][Important Behavior Changes] QVariant::isNull()
no longer returns true when the variant contains an object of some
type with an isNull() method, that returns true for the object;
QVariant::isNull() now only returns true when the variant contains
no object or a null pointer.
Change-Id: I3125041c4f8f8618a04aa375aa0a56b19c02dcf5
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Comparing two variants will not try to convert the types
of the variant anymore. Exceptions are when both types are
numeric types or one type is numeric and the other one a
QString. The exceptions are there to keep compatibility with
C++ and to not completely break QSettings (which needs automatic
conversions from QString to numeric types).
[ChangeLog][Important Behavior Changes] Comparing two
variants in Qt 6 will not try attempt any type conversions before
comparing the variants anymore. Instead variants of different type
will not compare equal, with two exceptions: If both types are numeric
types they will get compared according to C++ type promotion rules. If
one type is a QString and the other type a numeric type, a conversion
from the string to the numeric tpye will be attempted.
Fixes: QTBUG-84636
Change-Id: I0cdd0b7259a525a41679fb6761f1e37e1d5b257f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove the compare method in the QVariant::Handler struct. Rely
on the generic support provided by QMetaType instead.
[ChangeLog][Important Behavior Changes][QVariant] QVariant will now use builtin support in
QMetaType to compare its content. This implies a behavioral change
for some graphical types like QPixmap, QImage and QIcon that will
never compare equal in Qt 6 (as they do not have a comparison
operator).
Change-Id: I30a6e7116c89124d11ed9052537cecc23f78116e
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Change-Id: Ibdc95e9af7bd456a94ecfffd16066c47ea9766d0
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
[ChangeLog][QtCore][QJsonDocument] Fixed a bug that caused
QJsonDocument's equality operator to crash if one of the operands was
default-constructed and the other wasn't.
Pick-to: 5.15
Fixes: QTBUG-85969
Change-Id: I5e00996d7f4b4a10bc98fffd1629f835f570ef6b
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Use the actual minimum value, rather than minus the maximum, and adapt
the overflow expectations so that they're correct west of Greenwich as
well as east.
Change-Id: I7a5f4510db0fdea3855b5b2bd4c4a86882030efd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Due to a limitation of mktime(), we would have declared it invalid.
Tidied up qt_mktime() slightly in the process.
Change-Id: I25469e314afee6e0394e564bc69a98883005d4ec
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Removed isCompressed(), deprecated since 5.15, and (since 5.13)
addSearchPath() and searchPath().
Change-Id: I4b6fb8077c02bbe322334e474eaf0a2a7caf0004
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QString's fromUtf16() prefers char16_t data over ushort.
Change-Id: Ib20c5afa09ceabb4e91fe434b6a057edb4739a53
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
mkspecs/features/qt.prf adds a dependency on the system threading
library if the Qt Core thread feature is enabled. Because qt.prf is
loaded by any public or internal Qt project, it's essentially a public
dependency for any Qt consumer.
To mimic that in CMake, we check if the thread feature is enabled, and
and set the Threads::Threads library as a dependency of Qt6::Platform,
which is a public target used by all Qt modules and plugins and Qt
consumers.
We also need to create a Qt6Dependencies.cmake file so we
find_package(Threads) every time find_package(Qt6) is called.
For the .prl files to be usable, we have to filter out some
CMake implementation specific directory separator tokens
'CMAKE_DIRECTORY_ID_SEP' aka '::@', which are added because we call
target_link_libraries() with a target created in a different scope
(I think).
As a result of this change, we shouldn't have to hardcode
Threads::Threads in other projects, because it's now a global public
dependency.
Task-number: QTBUG-85801
Task-number: QTBUG-85877
Change-Id: Ib5d662c43b28e63f7da49d3bd77d0ad751220b31
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Receiving an rvalue still requires to check whether the parameter
is detached, otherwise we can't steal its backing std::map.
Change-Id: Ie88dbf39fd777112ad7bb20a46d5c2d65be8eb3d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... and QMultiMap as std::multimap.
Just use the implementation from the STL; we can't really claim that
our code is much better than STL's, or does things any differently
(de facto they're both red-black trees).
Decouple QMultiMap from QMap, by making it NOT inherit from
QMap any longer. This completes the deprecation started in 5.15:
QMap now does not store duplicated keys any more.
Something to establish is where to put the
QExplictlySharedDataPointer replcement that is in there as an
ad-hoc solution. There's a number of patches in-flight by Marc
that try to introduce the same (or very similar) functionality.
Miscellanea changes to the Q(Multi)Map code itself:
* consistently use size_type instead of int;
* pass iterators by value;
* drop QT_STRICT_ITERATORS;
* iterators implictly convert to const_iterators, and APIs
take const_iterators;
* iterators are just bidirectional and not random access;
* added noexcept where it makes sense;
* "inline" dropped (churn);
* qMapLessThanKey dropped (undocumented, 0 hits in Qt, 1 hit in KDE);
* operator== on Q(Multi)Map requires operator== on the key type
(we're checking for equality, not equivalence!).
Very few breakages occur in qtbase.
[ChangeLog][Potentially Source-Incompatible Changes] QMap does not
support multiple equivalent keys any more. Any related functionality
has been removed from QMap, following the deprecation that happened
in Qt 5.15. Use QMultiMap for this use case.
[ChangeLog][Potentially Source-Incompatible Changes] QMap and
QMultiMap iterators random-access API have been removed. Note that
the iterators have always been just bidirectional; moving
an iterator by N positions can still be achieved using std::next
or std::advance, at the same cost as before (O(N)).
[ChangeLog][Potentially Source-Incompatible Changes] QMultiMap does
not inherit from QMap any more. Amongst other things, this means
that iterators on a QMultiMap now belong to the QMultiMap class
(and not to the QMap class); new Java iterators have been added.
Change-Id: I5a0fe9b020f92c21b37065a1defff783b5d2b7a9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
