a) don't detach until an occurrence found
b) don't memmove every time an occurrence found
c) truncate quickly )
well, numbers are better than words:
before:
RESULT : tst_QList::removeAll_primitive():
2,617,902 CPU ticks per iteration (total: 261,790,171, iterations: 100)
RESULT : tst_QList::removeAll_movable():
2,547,540 CPU ticks per iteration (total: 254,753,960, iterations: 100)
RESULT : tst_QList::removeAll_complex():
16,852,099 CPU ticks per iteration (total: 1,685,209,906, iterations: 100)
after:
RESULT : tst_QList::removeAll_primitive():
73,520 CPU ticks per iteration (total: 73,520,442, iterations: 1000)
RESULT : tst_QList::removeAll_movable():
90,422 CPU ticks per iteration (total: 90,422,464, iterations: 1000)
RESULT : tst_QList::removeAll_complex():
9,667,073 CPU ticks per iteration (total: 9,667,072,670, iterations: 1000)
Merge-request: 1285
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
(cherry picked from commit b209fe3b1a51f64541067917e96de99f14ad65f3)
Change-Id: Ia26036ed741cefcf4b5868b7b2fc5eae8130d3dc
Reviewed-on: http://codereview.qt-project.org/4577
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
as shortcutDestroyed(..) modifies the shortcuts list.
disconnect from shortcutDestroyed() first, or operate on a detach()-ed list
this was uncovered by QList::removaAll() optimization patch.
(cherry picked from commit e95de30977291a251660f72baa84b5ff244711fb)
Change-Id: Ie0b371c54458ce85f4d36430de8080a5e78d8b7f
Reviewed-on: http://codereview.qt-project.org/4585
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
These tests used requires(contains(QT_CONFIG,private_tests)) in their
.pro file, but did not subtract themselves from their parent project
SUBDIRS when private_tests weren't enabled.
In the best case, this wastes a little time as qmake iterates over these
projects which won't be built. In some worse esoteric cases, this may
break compilation or packaging.
Change-Id: I189c108ee9943b15114becf9d6b04f78dbabbe31
Reviewed-on: http://codereview.qt-project.org/4389
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Use the new PCMPESTRM instruction (Parallel CoMPare Explicit-length
STRings with result in a Mask) which is added in SSE4.2 for
facilitating string operations. The "compare ranges" mode allows us to
search for characters outside the Latin 1 range and then use the
SSE4.1 PBLENDVB instruction to replace those with question marks.
Unlike previous SSE compare instructions, the PCMPxSTRx family allows
us to operate on unsigned 16-bit values. This saves us another
parallel add.
Reviewed-By: Samuel Rødal
(cherry picked from commit 45d2d36c9dbcbce403c78838ea52acd1ab111b68)
Change-Id: I0f9d864f9d19c0f0da43ccb6918dc28295074496
Reviewed-on: http://codereview.qt-project.org/4468
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
QNetworkProxy takes an hostname, not an url.
Change-Id: I7504fbc02a817d6c75ee55dc8bbdd66ec1e6cd01
Reviewed-on: http://codereview.qt-project.org/4373
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
This fixes a few bugs in QML mode name resolution and simplifies
our V8 patchset a little by folding some patches together.
Change-Id: Ia528a43ac8ccad95ac81bcdff5d05aaeab4b48b2
Reviewed-on: http://codereview.qt.nokia.com/4294
Reviewed-by: Aaron Kennedy <aaron.kennedy@nokia.com>
Unmask the last character typed, not the last character in the string.
Change-Id: I9c70d2347bf878c18ab0a7f4ea76f755ca19a85c
Task-number: QTBUG-17003
Reviewed-by: Alan Alpert
(cherry picked from commit b98e9e69dd8ba33d5f01b9518d95b63b86c4b443)
Reviewed-on: http://codereview.qt.nokia.com/4165
Reviewed-by: Andrew den Exter <andrew.den-exter@nokia.com>
Many applications relied on the undefined behaviour that the
filesystem engines returned clean paths (despite the documentation
stating that they may not), and consequently suffered regressions with
Qt 4.8.
Unix paths are once again cleaned if necessary.
Windows/Symbian paths were already cleaned, but now use the utility
function to check if a path is dirty, to avoid duplicated code.
Task-number: QTBUG-19995
Change-Id: If8c18469f149291c9d079ae3da23bc2087bbd49a
Reviewed-on: http://codereview.qt.nokia.com/4154
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Prasanth Ullattil <prasanth.ullattil@nokia.com>
The build-key is an old mechanism to work around binary
incompatibilities in GCC 3.x versions. Modern GCC has not broken binary
compatibility since 3.4, making this mechanism obsolete.
The cache value stored now only includes Qt version, the debug/release
boolean, and the last modified time for the plugin. Old 4-value keys
will be replaced with new keys as the plugins are reloaded the first
time.
This also removes QLibraryInfo::buildKey(), which is a source-incompatible
change.
The UNIX and Windows configure tools have been updated to stop
outputting the QT_BUILD_KEY preprocessor directive.
See also:
http://lists.qt.nokia.com/pipermail/qt5-feedback/2011-August/000892.html
Change-Id: I7d06969a370d3d2c6de413c1230d9d6789cbf195
Reviewed-on: http://codereview.qt.nokia.com/3977
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
QDir::operator== was creating a clean absolute path for comparison
purposes if the original path was relative.
However original absolute paths were trusted, even though they could
be unclean. Now they are checked for cleanliness first.
Task-Number: QTBUG-19995
Task-Number: QTBUG-20495
Change-Id: I047a1a40ae5151e4604085e4ac87f30a4e4979c4
Reviewed-on: http://codereview.qt.nokia.com/4099
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Prasanth Ullattil <prasanth.ullattil@nokia.com>
Also export two symbols for auto tests since opaque keys
need EVP_PKEY * created by openssl.
Change-Id: Ib7801ddfceb259de7291bfaa5940df87f68af97d
Merge-request: 48
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Reviewed-on: http://codereview.qt.nokia.com/4011
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
This doesn't make sense, none of the other benchmarks do it, and it
breaks compilation for a release-only mac build.
Change-Id: I3bc73f670688d413afcae7fa88bab19f7b3dac33
Reviewed-on: http://codereview.qt.nokia.com/4017
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This appears to serve no purpose.
It was probably copy-pasted from assert.pro.
Change-Id: Ie3d9605b969ee11f2d64c1ac3e480e9efb862a3c
Reviewed-on: http://codereview.qt.nokia.com/4016
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This test intentionally crashes itself by using Q_ASSERT.
Since Q_ASSERT is a no-op in release builds, the .pro file was
attempting to always force debug mode for this project.
However, on platforms where debug vs release affect linkage (e.g. mac
and windows), this is invalid. On these platforms, debug mode can't be
enabled unless debug versions of the Qt libraries are available, which
they are not if Qt is configured with `-no-debug-and-release -release'.
Use a different method to ensure that Q_ASSERT really asserts, for both
debug and release builds.
Change-Id: I13eea2c72c77a0a981850dbcaa77f65f147c8490
Reviewed-on: http://codereview.qt.nokia.com/4015
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Both the old and new XML loggers produce the Complete and Light XML log
formats, while only the new logger produces Xunit XML logs. The
disadvantage of the new logger is that it is more complex and doesn't
produce a partial log if the test fails to terminate gracefully. This
behaviour arises because Xunit format output cannot be written correctly
until all tests have been executed.
This commit removes the Complete and Light XML formats from the new
logger, using the old logger to produce those formats and the new logger
to produce only Xunit XML. Prior to this commit, the qtestlib selftests
demonstrate that the old and new loggers produce identical output for
Complete and Light XML.
This commit also removes the undocumented -flush command-line option,
which was used rather obscurely to select between the old and new
loggers.
The newer logger will be renamed to QXunitTestLogger in a subsequent
commit.
Change-Id: Id304f5b411bdd520409ee233f6bc34e8917942ab
Reviewed-on: http://codereview.qt.nokia.com/3923
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The selftest for assert messages calls QEXPECT_FAIL if the assert
message doesn't exactly match the expected output. This is because
Q_ASSERT uses __FILE__, which is compiler-dependant.
The expected output for this test contains various hard-coded unix
paths meaning that the test never passes on any platform. This commit
removes those paths from the test data so that the test passes for
compilers that don't put path information in __FILE__. This commit also
makes the XFAIL message more accurate -- absolute paths in assert
messages don't come from QTestLib, they come from Q_ASSERT's use of
__FILE__.
Change-Id: I9aae212379b43a29ae83715717cc978b4b619420
Reviewed-on: http://codereview.qt.nokia.com/3908
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The toUpper/Lower() methods in QString should not
be locale dependent, as this can lead to rather
hard to find bugs in at least a turkish locale.
Rather have explicit, locale dependend case conversions
available in QLocale.
Reviewed-by: Denis Dzyubenko
(cherry picked from commit da0e1e101bb4c44c25b6523357fa81ad1b2d6539)
Change-Id: I1cc3f341bef17ad573a736dc94c9c5d514ace54e
Reviewed-on: http://codereview.qt.nokia.com/3259
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
regenerating blacklisted certificates with same serial number and
common name, but longer validity: Now they are valid for 10 years.
(cherry picked from commit a3d22777028b102b7f65cf2db9719f5d57308b04)
Change-Id: I7884484c2f61b3a55f671faa38967e62fc8954f0
Reviewed-on: http://codereview.qt.nokia.com/3894
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
The newer test logger did not produce the same light XML output as the
logger that it replaced. In particular, it did not output the <DataTag>
tag and it incorrectly nested a <Message> tag inside the <Incident> tag
when a fatal error occured in a test.
Unfortunately, it appears that the expected lightxml output for the
selftests was produced by running tests using the newer logger, while
the selftests did not use the older lightxml logger. Thus the errors
were not detected by the selftests.
This commit adds the older lightxml logger to the selftests, updates the
expected test data accordingly, and modifies the newer lightxml logger
to behave correctly. This last item is achieved by making the lightxml
streamer copy most of the code from the xml streamer -- lightxml output
is supposed to be same as xml, except for the omission of the root and
<TestCase> tags.
Change-Id: Ie6e1f69dd6000df2b9d0c5c8e2109fe7bbff3956
Reviewed-on: http://codereview.qt.nokia.com/3902
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
For XML logs, an Incident tag with no sub-tags has a space before the
closing slash. For Light XML logs, this space was missing unless the
-flush command line option was supplied.
Change-Id: I6de2e140f9309f333b5b97ed7f8116e4e727a149
Reviewed-on: http://codereview.qt.nokia.com/3871
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The omission of spaces is crucial in order for the
regular expressions in configure to be able to detect
that v8.pro isn't a "main project" file.
Task-number: QTBUG-21168
Change-Id: I2e94736ee3195bed7fd528759b1bc1812f1ae54c
Reviewed-on: http://codereview.qt.nokia.com/3878
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
blacklist the leaf certificate for now. There might well be more fake
certificates in the wild, for that either the Diginotar.nl root cert
needs to be disabled on the system or OCSP would need to be enabled
(not supported by Qt yet).
Reviewed-by: Richard J. Moore <rich@kde.org>
(cherry picked from commit 70f6a1b91b242174682c30be976c2aa36c450cc7)
Change-Id: I7cd3fdc4c6e85202914764f983a60d301e54aa35
Reviewed-on: http://codereview.qt.nokia.com/3893
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
This adds Aaron's copy of V8 to src/3rdparty/v8 (as a
git submodule), and builds it as a "normal" Qt library
(without any dependencies on Qt itself).
The library can be added to a project with
QT += v8-private
V8 API headers are available as private includes, e.g.
#include <private/v8.h>
The API is private because we're exposing a third-party
API directly, and we don't want to (and cannot) make
source or binary compatibility guarantees for it.
Since we want the V8 public API headers to be private
headers in Qt, syncqt and sync.profile were extended to
understand a new configuration option, the
@allmoduleheadersprivate array, that tells syncqt whether
all the library headers should be treated as private even
though they don't follow the _p.h Qt convention.
The V8 project files, patches and autotests are copied
from the QtDeclarative repository. The next step after
this commit is to remove QtDeclarative's copy of V8 and
link with QtV8 instead.
Task-number: QTBUG-20963
Change-Id: Ib8820362cdbc8fa662a5e97db841656cf38d1b62
Reviewed-on: http://codereview.qt.nokia.com/3092
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This test sometimes passes and sometimes fails.
Task-number: QTBUG-21098
Change-Id: Ic56e93d12a7b3fa2e9c135e25610bf1119fa636e
Reviewed-on: http://codereview.qt.nokia.com/3548
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Michael Goddard <michael.goddard@nokia.com>
QTBUG-21102 is currently blocking integration of several commits.
Marking the test as unstable until the bug has been fixed.
Change-Id: I9b630767fd1aa4369564f5e90c63e850808385e1
Reviewed-on: http://codereview.qt.nokia.com/3584
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
Implement the IAccessible table2 interface for itemviews.
This is simpler than what we have in complexwidgets.
For now it is only used on Linux.
The new table2 interface is ifdef'ed to only be used on X11.
Improve handling of accessible events and clean up.
There are two xfails for the Table and Tree where sibling
navigation is not implemented yet.
Reviewed-by: Gabi
(cherry picked from commit e797ba558dddd45522b5a317316e497e9efc44a8)
(cherry picked from commit eff5ecc5d8f65fa25d6cfd6ed96a9d2a00d0c663)
(cherry picked from commit d29876008fad400bca8d6b37e5d5f61dd1bcb39d)
(cherry picked from commit 2a326fdc8f8bf2bd2c5764394616100906d9db2d)
(cherry picked from commit 9b72e79e20d0d3560e0b064b8b0d75e35feb720e)
(cherry picked from commit 075b0f744363842ed4179c644d933d461389544f)
Change-Id: I654f74991830ae1fc7df7cc91d930390fb88b2a4
Reviewed-on: http://codereview.qt.nokia.com/3274
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Add boundary helper functions to the QAccessibleTextInterface.
Move LineEdit over to use QTextBoundaryFinder.
Reviewed-by: Jan-Arve
(cherry picked from commit c1ec1a95806cda54d5b4e9f8ed159a611bd75964)
Change-Id: Ib93599c49110aab50debe1e3fb0073dd34071c87
Reviewed-on: http://codereview.qt.nokia.com/3025
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
When a virtual object is registered with the SubPath option
it will handle all dbus calls to itself and all child paths.
It needs to reimplement handleMessage for that purpose.
Introspection needs to be implemented manually in the introspect function.
Reviewed-by: Thiago Macieira <thiago.macieira@nokia.com>
(cherry picked from commit b07919b3de8cff3e44b7271062372b14bcda5b83)
(cherry picked from commit 997c2dfed7a04da2fac577f1c29b89bda4939e2d)
(cherry picked from commit c676b7095d826dc2d006f52a4b234546af5e2137)
Change-Id: I003007604b286af8000959756ce9d25c17306f5b
Reviewed-on: http://codereview.qt.nokia.com/3051
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
This was known to be unstable on mac, but appears to be unstable on
Linux also.
Task-number: QTBUG-20987
Change-Id: I760533c32cf13d24f8428f120813eb590b202182
Reviewed-on: http://codereview.qt.nokia.com/3131
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Wait for window shown on _all_ platforms, not just X11.
QEXPECT_FAIL a test which relies on QCursor::setPos, which is currently
unimplemented for qpa (QTBUG-20753).
Change-Id: I72412476afc7e52ccb6cab4306ff791b7e7d8d93
Reviewed-on: http://codereview.qt.nokia.com/3118
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Throwing C++ exceptions through the event loop doesn't work if the Glib
event loop is used, so conditionally skip that part of the test.
Change-Id: Ic27ebf4eb75bd1cf7c7e35f371f29bcfc0e1844a
Reviewed-on: http://codereview.qt.nokia.com/2471
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
This test unstably fails because font lookup is somewhat broken for qpa.
Task-number: QTBUG-20986
Change-Id: Id4ebd35e979d8837d32b58e5ed9c1df3ac15827a
Reviewed-on: http://codereview.qt.nokia.com/3130
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
The necessary font handling code for qrawfont currently seems to be
unimplemented for all qpa backends.
Task-number: QTBUG-20976
Change-Id: I2b5c511936892e2754c0ee809b7a558f44d1d132
Reviewed-on: http://codereview.qt.nokia.com/3116
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
