[ChangeLog][Important Behavior Changes] QDebug output for QStrings
changed compared to Qt 5.5.0 to more closely match the output of
previous Qt versions. Like Qt 5.5.0, QDebug will escape non-printable
characters, the backslash and quote characters, but will no longer
escape the printable characters.
Task-number: QTBUG-47316
Change-Id: I52dd43c12685407bb9a6ffff13f62ef68cbc80c5
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Otherwise, on some systems (Windows), we'll always create the same dirs.
Change-Id: Id3d5c7bf4d4c45069621ffff13f79ba91e0f974b
Reviewed-by: Christopher Adams <chris.adams@jollamobile.com>
A couple of test always fail on OS X/iOS with SecureTransport
(simply not implemented yet).
Change-Id: Idd82262512938c36b657b497751738fdc804c182
Reviewed-by: Jeremy Lainé <jeremy.laine@m4x.org>
Reviewed-by: Richard J. Moore <rich@kde.org>
[ChangeLog][QtCore][QLoggingCategory] Fixed behavior of default
severity passed to constructor or Q_LOGGING_CATEGORY with regards to
QtInfoMsg, which was previously treated as being more severe than
QtFatalMsg.
This is because the code was using the numeric value of QtMsgType as a
proxy for severity (via the <= operator), but the value of QtInfoMsg is
greater than QtFatalMsg. Instead, the severity ordering must be dealt
with explicitly.
Change-Id: I5f178afc735221b00cb67c2cea4fa964bd9079ce
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Also removed the XFAIL from connectToUnresponsiveHost
Change-Id: Ie0f5685a8fa437c00d22f9e76b51ac61347ce03b
Task-number: QTBUG-15111
Reviewed-by: Caroline Chao <caroline.chao@theqtcompany.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: Ie29640451dddeb58342038a8cd5fac152cce39e5
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
Build it only in -developer-build mode for tests that might depend
on exact-matching font behavior.
Return earlier to avoid doing any useless job.
Change-Id: I966ee5689f03403e45f4c957b63e3113f0467803
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: I624deb320c378c18a29b3707f48583d53bfd5186
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: Icaa1edafcc6e2779fbd6dbc2c058544d6e07f1e9
Reviewed-by: Richard J. Moore <rich@kde.org>
The QSslCertificate tests only covered certificates with RSA keys, this
extends the test coverage to DSA and EC keys.
Change-Id: Ibee26f449cf6c1d97cbac6b511972eb44d6f0bd2
Reviewed-by: Richard J. Moore <rich@kde.org>
All overloads of QProcess::start will now check whether the program
string is empty and in that case
- set error to FailedToStart,
- set errorString to "No program defined",
- emit error.
Until now only one of the three overloads behaved like this.
As a side effect, start(QString(), QStringList()) will not crash on
Windows anymore.
Task-number: QTBUG-47404
Change-Id: I2f93657204fe3643b1d74a74817843c05fc4a96b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: I4e4a319c5918d697a33f6d6032c36b8c9660ca05
Reviewed-by: Andy Shaw <andy.shaw@theqtcompany.com>
Introduce overloads in the API to allow specifying multiple color
attachment sizes and formats. When these are in use and MRT is supported,
a texture or renderbuffer is created for each of GL_COLOR_ATTACHMENT0, 1, 2, ...
[ChangeLog] Added support for multiple render targets in QOpenGLFramebufferObject
Task-number: QTBUG-39235
Change-Id: Ie7cfd81d1b796a9166b80dff7513aafe0120d53d
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
According to history, the test was supposed to verify
the correct parsing of the command line on Windows by the qWinCmdLine()
function in corelib. It did not test anything since the test
application printed out argv[1] instead of
QCoreApplication::arguments()[1]. Since qWinCmdLine() has been replaced
by the WinAPI CommandLineToArgvW(), the test no longer makes sense
and also starts to fail then warnings are printed to the error output.
Change-Id: Idf642783ebb56eaa8fba9004174557485563a84f
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
So we can have interoperability with algorithms.
Motivated by inefficient code like qDeleteAll(hash.keys())
[ChangeLog][QtCore][QHash] Added key iterators, accessible through
keyBegin() and keyEnd().
Change-Id: I1f9db8a7a4294e1556cbb50b8fe5ebdcf0dc29a2
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
So we can have interoperability with algorithms.
Motivated by inefficient code like qDeleteAll(map.keys())
[ChangeLog][QtCore][QMap] Added key iterators, accessible through
keyBegin() and keyEnd().
Change-Id: Ieee2f9ad031e9d1e845a71447746699bbe95b96c
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The comment about non-OpenSSL backends not reproting a specific error
for self-signed certificates contained a typo, this fixes it.
Change-Id: I3010981d5d87d68ebf5e984c003b8bbbfb019b96
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
Non-OpenSSL backends are not able to report a specific error code
for self-signed certificates.
Change-Id: I56bf130335b2afa65cf2bd5248a40ac0e32f74c2
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Rename the test slot eventFilter() to testEventFilter(), which fixes:
tst_qgraphicsproxywidget.cpp:101:10: warning: 'tst_QGraphicsProxyWidget::eventFilter' hides overloaded virtual function [-Woverloaded-virtual]
void eventFilter();.
Change-Id: Ia05d188b18dcbf3a0b093dcea19a7122bcde6e62
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
tst_qgraphicsanchorlayout.cpp:144:5: warning: ignoring return value of function declared with warn_unused_result attribute [-Wunused-result]
layoutGeometry.adjusted(+right, +top, -left, -bottom);
Change-Id: I411ccaa867e418f36869fc244ea2eeaa5b117312
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Fix warnings:
tst_qtcpsocket.cpp:245:9: warning: private field 'numConnections' is not used [-Wunused-private-field]
int numConnections;
^
tst_qtcpsocket.cpp:1834:9: warning: private field 'exitCode' is not used [-Wunused-private-field]
int exitCode;
tst_qcheckbox.cpp:86:10: warning: private field 'tmp' is not used [-Wunused-private-field]
uint tmp;
^
tst_qcheckbox.cpp:88:10: warning: private field 'tmp2' is not used [-Wunused-private-field]
uint tmp2;
Below warning is caused by code #ifdefed for OS X only, make it a local variable:
tst_qlabel.cpp:114:16: warning: private field 'test_edit' is not used [-Wunused-private-field]
QLineEdit *test_edit;
Change-Id: I53c755545fe2e7ca1f053f40c8c0e50aec2efcdd
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
in tests/auto/other, tests/auto/printsupport and tests/auto/xml.
Change-Id: I28cbdc89d36791f179425f17f90b697c60660938
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
Preparing the replacement of Q[TRY]_VERIFY(a == b) by
Q[TRY]_COMPARE(a, b) for non-boolean types.
Change-Id: Iab6ec2f0a89a3adc79e18304573994965013dab5
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: I7add5b7afeba83895acdcbed110e8275dc76864a
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
The history state had the limitation that it was hard (or impossible) to
use when more than one default state had to be entered. For example,
using it in a parallel state was impossible without ending up in an
infinite loop.
This patch changes the QHistoryState to only have an initial transition,
and the state selection algorithm is changed accordingly. It also brings
QStateMachine closer to the SCXML standard.
The existing defaultState is implemented on top of the
defaultTransition: when used, a new transition, with the default state as
its target, is set as the defaultTransition.
Task-number: QTBUG-46703
Change-Id: Ifbb44e4f0f26b72e365af4c94753e4483f9850e7
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
A parallel state cannot have an initial state, as all children of the
parallel state will be entered. Setting such an initial state on a
QState marked as ParallelStates would already produce a warning and
ignore the initial state. Now any initial state that has been set before
changing the child-mode to ParallelStates will also produce a warning
and remove the previously set initial state.
Change-Id: Ie5fcd44b03516744f785f2d1880bf806918c44d4
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Add QTRY_VERIFY2_WITH_TIMEOUT() similar to QTRY_VERIFY_WITH_TIMEOUT()
except that QTRY_VERIFY2() is used below the loop and QTRY_VERIFY2()
based on it.
Add tests to cmptest.
[ChangeLog][QtTest] Added macros QTRY_VERIFY2_WITH_TIMEOUT(), QTRY_VERIFY2()
making it possible to output a message after the timeout has expired.
Change-Id: I587e24f3aeb73542dbf3ccb936a16f2e0806555f
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
Set QFileDevice::WriteUser on all files extracted from resources. These
are read-only, which is preserved by QFile::copy(). This caused the
deletion of the temporary directory to fail on Windows.
Change-Id: Id99de9160471c38bcec68025c89cfabbe209bdbe
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: David Faure <david.faure@kdab.com>
[ChangeLog][QtCore][QProcess] Fixed a bug that caused QProcess to launch
a child process on Unix even if the directory specified with
setWorkingDirectory did not exist.
Task-number: QTBUG-47271
Change-Id: Ib306f8f647014b399b87ffff13f195158b0e52f5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
We force a recreation of the library paths with added information on
construction of QCoreApplication. This way we can find plugins in
the application directory which only becomes known when
QCoreApplication is created. When the user changes the library path
we create a new list of the manually modified library paths and
recalculate it from the delta of original vs. modified paths when
QCoreApplication is created.
The upsides of this approach vs. keeping an explicit delta are:
* We don't need to introduce a separate data structure to hold
the added/removed status for delta items or the information that
the whole list got replaced.
* The lists never get larger than the the real library paths. An
explicit delta would have to record all modifications.
* I don't think the delta replay algorithm we would have to do
anyway could be made much more compact than the one this change
introduces.
Of course, if the user actually changes anything, the list is
duplicated. Considering that this is a rarely used function and
that we would have to save some extra information anyway, I think
we can live with this.
Task-number: QTBUG-38598
Change-Id: I3bfbbd1be62dd5804dcc7ac808b053428a4e3149
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This adds an OpenSSL-based implementation of the QSslKeyPrivate encrypt
and decrypt method. This puts both the OpenSSL-based and non-OpenSSL
backends (WinRT for now) on par.
Change-Id: I18a75ee5f1c223601e51ebf0933f4430e7c5c29b
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
This is low-hanging fruit, for two reasons:
1. The implementation is dead-simple (unlike, say, in QList).
2. It's completely transparent to the QVector user (unlike,
say, emplace_back, which can only be used inside an ifdef).
Change-Id: Iaf750100cf61ced77aa452f0e4e3c4ec36b29639
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
FileInfo is larger than a void*, so holding them in a QList is needlessly
inefficient. Worse, the code could come to depend on the fragile property
of (inefficient) QLists that references to elements therein never are
invalidated.
Change-Id: I772177c5ac544a5fecce2368f628148308ef260f
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The overload was added for NokiaX86 and RVCT and is bound for
removal.
Task-number: QTBUG-47260
Change-Id: Ic67cee8769847956e16cd0470ebcd663a9e98a40
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Long-lived threads started by Qt itself can now receive events even if
QCoreApplication hasn't been created. This is required in all threads we
start that will handle events, unless we're sure that the thread will
exit before the global application object begins destruction.
Otherwise, those threads will have race conditions dealing with the
event delivery system trying to call the QCoreApplication::notify()
virtual while the object is being destroyed.
Change-Id: I27eaacb532114dd188c4ffff13d4ad2a4bb443e6
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Otherwise, if I open tests/auto/dbus/dbus.pro in Qt Creator, it shows me
"test", "test2", "test3", "test4" and it's very hard to know which test
is which.
Change-Id: Iee8cbc07c4434ce9b560ffff13d0654696c025b7
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
I'm getting an error with WSARecvFrom in nativeBytesAvailable() and I
don't know why. The number of bytes obtained is correct and the test
works for 2 bytes, so let's use that.
The Windows nativeBytesAvailable() function has a comment saying that
WSAIoctl sometimes indicates 1 byte available when there's a pending
error notification, so that function proceeds to do a WSARecvFrom to
peek the number of bytes. Somehow that function in this test is getting
a SOCKET_ERROR I can't explain.
Change-Id: Ic5b19e556e572a72a9df9a405b1fee3b7efb8b24
Reviewed-by: Richard J. Moore <rich@kde.org>
From MSVC 2015 onwards, MSVC formats floats using printf("%g") like
g++, so the fiddling of the expected output needs to restricted
accordingly.
Change-Id: I6e7f78e5e90f70886a8b2ef37c0fb9bf82b5e1a3
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
When running the test, one gets the impression that it hangs.
Add some debug output including time to show what happens.
Change-Id: Iac6b4f0518ecec62169bf2269a0a8ec9192da570
Reviewed-by: David Faure <david.faure@kdab.com>
On Windows, having read-only files in a directory can cause removal
to fail. When file deletion fails, check on the permissions, set
write permissions and retry.
Split apart code paths by OS in tst_QDir::removeRecursivelyFailure();
deletion of the read-only directory on UNIX should still fail.
Change-Id: I36e54be5229a7b552e90fd5f42722b868fa0b6ee
Reviewed-by: David Faure <david.faure@kdab.com>
The test showed failures on OS X:
FAIL! : tst_QListView::batchedMode() Compared values are not the same
Actual (ba.size()): 2
Expected (3) : 3
Loc: [tst_qlistview.cpp(848)]
Use QTRY_COMPARE() to count the number of visible indexes with
a helper function instead of using hard-coded timeouts. Item 3
appears with a little delay on OS X.
Change-Id: I2fb2ff5ebdf9dbe85bdc79401375ad6f47b7b12b
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The test checks whether a child window receives
mouse events synthesizes from touch. Enlarge the child
window so that it fully covers the parent and move the
touch point a bit inside so that it is not affected
by window manager positioning issues.
Use QTRY_VERIFY.
FAIL! : tst_QApplication::touchEventPropagation() 'widget.seenMouseEvent' returned FALSE. ()
Loc: [/work/build/qt/qtbase/tests/auto/widgets/kernel/qapplication/tst_qapplication.cpp(2107)]
Change-Id: Ic08e68b1e547cc7148cd8994464fdc2a14ac507b
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The test sends touch events to the root item at the top left
corner which fails if the views starts to scroll.
Make the view sufficiently large to prevent scrolling and align
at top left.
FAIL! : tst_QTouchEvent::touchBeginWithGraphicsWidget() Compared values are not the same
Actual (((root->touchBeginCounter))): 0
Expected (1) : 1
Loc: [/work/build/qt/qtbase/tests/auto/gui/kernel/qtouchevent/tst_qtouchevent.cpp(1471)]
Change-Id: I357322ccc809ddb5cb587febf3c75cbe497e59d8
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
An object that throws in its constructor cannot be reentered. This
violates both C++11 and C++98. It's also a regression from MSVC 2013.
The unit test is renamed to indicate what it really does, as opposed to
a misleading name that was probably a "thinko" on my part.
Task-number: QTBUG-47224
Change-Id: Ib306f8f647014b399b87ffff13f132436d0578ef
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
QTemporaryFileEngine does not store the pattern, so it needs to get it
again from QTemporaryFilePrivate prior to reopening the file. It's
possible to lose the pattern when remove() is called on the object.
Task-number: QTBUG-46156
Change-Id: I66a35ce5f88941f29aa6ffff13dfc7f83d4fa3a2
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Make the name of the signal and the name of the getter unambiguous,
which in turn allows the easy use of Qt 5-style connects.
[ChangeLog][QtCore] Deprecated QProcess::error() signal in favor
of new QProcess::errorOccurred() one.
Change-Id: Ic5bcf7d6878e6985f1b4fed9dbe247527d13758c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The test is crashing regularly (see bugreport).
Currently the test is not run in the regular CI system, that is why
the failures were not noticed.
Task-number: QTBUG-47128
Change-Id: I70d4ada0872316cc63d7629bb9ab2d055d70cf2a
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
There was an attempt to allow static instances of QIcon in
7727a4355876607a1a022ff54e2570dae883f79c (Qt 4). This patch does only
solve some of the corner cases and broke with
aa5f70c00a. Since the "breakage" has been
there for two years, let's officially declare it unsupported instead of
trying to work around the issue.
Change-Id: I61e12fd03953763ee2e70eae58bcaecabdcb85b8
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
We have ownership for a reason - and there seems to be
no good reason not to accept it here.
[ChangeLog][QtWidgets][QComboBox] QComboBox::setView no longer
deletes the old view directly. It now checks the ownership first.
Change-Id: Icb5e5c0a6e9dc93c1d1c1a90ff57fbcc0786aa60
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
This is a fix-up for cff39fba10.
That patch lead to some internal state issues that lead to the QTBUG-47048
or to QNetworkReply objects erroring with "Connection Closed" when
the server closed the Keep-Alive connection.
This patch changes the QNAM socket slot connections to be DirectConnection.
We don't close the socket anymore in slots where it is anyway in a closed state
afterwards. This prevents event/stack recursions.
We also flush QSslSocket/QTcpSocket receive buffers when receiving a disconnect
so that the developer always gets the full decrypted data from the buffers.
[ChangeLog][QtNetwork] Fix HTTP issues with "Unknown Error" and "Connection Closed"
[ChangeLog][QtNetwork][Sockets] Read OS/encrypted read buffers when connection
closed by server.
Change-Id: Ib4d6a2d0d988317e3a5356f36e8dbcee4590beed
Task-number: QTBUG-47048
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
On Windows, t->timeout was updated only once, at creation time, so the
timer would always show as "overdue" after the first activation.
The timer is updated to indicate the full remaining time during the slot
activation, which is the behavior of the Unix and Glib dispatchers.
Task-number: QTBUG-46940
Change-Id: I255870833a024a36adf6ffff13ecadb021c4358c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Sending several key presses with repeat=true should trigger the action
several times, unless autoRepeat is set to false.
Change-Id: I6469bbd78a608a87852554882c1632ce34422662
Reviewed-by: Liang Qi <liang.qi@theqtcompany.com>
Not all empty states were considered equal.
[ChangeLog][QtCore][QProcessEnvironment] Fixed a bug in
operator== involving different empty states.
Change-Id: I13c3200897847475bde2f963db0d2c587336b8a7
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Wasn't checked, and with all the mutex locking going
on under the hood, we better rule out that there's a
deadlock.
Change-Id: I5a2ef1a524fb42b7840c9f3c18395cde05b7ef28
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Had to mark {,c,const}{begin,end}() inline, since they are, and mingw
complains about inconsistent dllimport attributes.
[ChangeLog][QtCore][QByteArray] Added rbegin(), crbegin(), rend(), crend(),
and reverse_iterator and const_reverse_iterator typedefs.
Task-number: QTBUG-25919
Change-Id: Id5aefb52635f029305135afcd99db0b036a7af82
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Had to mark {,c,const}{begin,end}() inline, since they are, and mingw
complains about inconsistent dllimport attributes.
[ChangeLog][QtCore][QString] Added rbegin(), crbegin(), rend(), crend(),
and reverse_iterator and const_reverse_iterator typedefs.
Task-number: QTBUG-25919
Change-Id: I1d48729c76e510c1e49c0e5dc41691aa662fdf21
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
With two alpha-bits half opacity can not be represented, so we must use
one third (85) instead of half (127).
Change-Id: I2b3f1c983a3034196bf2604840945ad3a81f5b38
Reviewed-by: Liang Qi <liang.qi@theqtcompany.com>
QLocales can be compared for equality,
so qHash should be overloaded, too.
[ChangeLog][QtCore][QLocale] Added qHash(QLocale).
Change-Id: Ia0fdf1207b842b9bb20b8f9ab0165016915debf4
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Keeping the reference may end up in a crash if a created
QIcon outlives the QFileIconProvider and we then try to
generate a pixmap.
The reference is not necessary since the options are queried
only when creating the icon, so they can be saved in the icon
provider.
Task-number: QTBUG-46755
Change-Id: I5c60887c2ed39030a2a20298ff10fd652189e4e7
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
When executing the test in a sequence (as done by make check after
tst_qstackedlayout), tst_QToolTip::task183679 often fails since
apparently the tooltip is hidden when the cursor is near it.
Move to the cursor to the right corner of the widget to fix this.
Change-Id: I3b13239e77cb387f1b1425fab79c8d6faa27b5bb
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Instantiate widgets on stack and add cleanup function for the check.
Change all functions instantiating a QFormLayout without widget on
the stack to use a toplevel widget and pointer variables since
otherwise, the labels automatically created by a call like
QFormLayout::addRow("bla", widget) leak.
Change-Id: I72a7a9c3175b5793a9450c6fcb970012ccd2274b
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
Instantiate widgets on stack and add cleanup function for the check.
Change-Id: Ia527c228f9173d1b5aeba94ba4e14e1beba60731
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
Gather member variables testWidget, testLayout, w1..w3 and sp
used in getItemPosition() and itemAtPosition() in Helper
class ItemTestWidget.
Remove member variables m_grid, m_toplevel and instantiate the
top level widget on the stack in minMaxSize().
Remove empty slots and functions.
Add a cleanup() test checking that no visible top levels
are leaked with explanatory comment about data driven tests.
Change-Id: Ia30120d78144dab3b7c73864c6fbcef606cb19d3
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
Conflicts:
src/plugins/platforms/cocoa/qcocoafiledialoghelper.h
Manually fixed src/testlib/qtestcase.cpp to return the right type.
Change-Id: Id1634dbe3d73fefe9431b9f5378846cb187624e4
os.version is the kernel version which is just not very useful or easy to
use for us. Instead, introduce a string that allows easy differentiation
between Windows 7 and 8.
From the adapter identifier the driver description is often helpful too,
especially in virtual machines.
These allow writing rules like:
{ "description": "Use WARP in some Win 8 and 8.1 VMs",
"os": { "type": "win", "release": [ "8", "8.1" ] },
"driver_description": "VMware SVGA 3D",
"features": [ "disable_desktopgl", "disable_d3d9", "disable_d3d11" ]
}
Change-Id: I196f6b44d7bb9e42ef47f61f4c28d8aa79afb7c4
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Merely filling with Qt::transparent is not enough, as the default blend
mode of QPainter is QPainter::CompositionMode_SourceOver, where the alpha
of the source is used to blend the pixel on top of the destination. The
destination in the case of an FBO may contain garbage, and we end up with
the same garbage as the alpha is 0.
This was evident when running the ellipses and porter_duff/porter_duff2
tests on OS X. These tests can now be un-blacklisted.
Change-Id: I315fa764fa29fb3a06e38945a738a6feadf4502d
Reviewed-by: aavit <eirik.aavitsland@theqtcompany.com>
The test tried to position the mouse cursor over item #0 . This
sometimes results in the cursor being outside the window when
the window manager adds the window decoration on X11.
Move the cursor to the center of the window instead.
Add cleanup slot checking top level leaks, remove empty
functions.
Change-Id: I908240e1cc3fdbe370b43eae0015272ca342a312
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
If we have a filter applied that removes all entries, the source
model is sorted, and then we remove the filter, QSortFilterProxyModel
never emits rowsInserted. This is because it doesn't have the correct
source mapping and doesn't update when the filter is removed.
Change-Id: I447b2d150e509b128d27f4dabc4e081ca4ef037f
Task-number: QTBUG-46282
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The rationale being that the empty string is not a valid path component.
[ChangeLog][QtCore][QDir] QDir::relativeFilePath() now returns "."
instead of an empty string if the given path is the same as the
directory.
Change-Id: Ibcf31904b2ae5edf5639d4c2e5ba234365d347fd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Gives more information to user in case of failure. Also, fix the
order of parameters for some QCOMPARE's.
Change-Id: I3ea91f9602d4d32ac79027b6093caea749633c01
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since of Windows (Phone) 8.1 most of the desktop's thread functionality
is also available, so we might be able to share the code and get rid of
the extra implementation for WinRT.
Task-number: QTBUG-43837
Change-Id: I0ce907cd94899834527f88c70e1e395bafdb14b3
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@theqtcompany.com>
This reverts commit a6000e2b66.
Temporarily remove this to unblock the qtdeclarative dev CI.
While Windows 8 VMs are fixed by this patch, Windows 7 has different
problems.
Change-Id: I45ef064ed953cc4b7bbf19657300d4fc43d82452
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
ad9698713f reduced the curvethreshold
for wide lines, to fix QTBUG-46151. But as a side effect, the
threshold was increased for lines of widths >=0 and <4. This commit
fixes that, and also adds a lance test for the issue in QTBUG-46151.
Change-Id: I52507db622435fe1d2646640cb0bd9cd8222e453
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Move the code path handling widgets embedded in QGraphicsProxyWidget
into the loop moving up the parent hierarchy.
Add child widget to test.
Task-number: QTBUG-41135
Change-Id: Ibd86413faaa927145a85a2f5864f162979135053
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This isn't specific to an Ubuntu version, unfortunately. It also fails
on OpenSuSE occasionally and other Ubuntu versions.
Change-Id: I6a1ca55a198270f1a1e8a9916e9f768762211550
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
When the test fails, show the actual signals spy count.
Change-Id: Id7312bfbfb6531404a9df73234031f13295c80ea
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
It's flakey with 'current > 42' sometimes succeeding and sometimes failing.
Change-Id: I86f52b0d0cecd345ed6c5852c822d12eae6acb26
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The failure of this test is not architecture specific but rather
Windows specific. It is failing on either type of Windows machine at random
intervals.
Change-Id: Ie3ab1d868053b22ee5b0d965a8cd6b923985b019
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
All variants of the tests are timing out randomly on all platforms :(
Change-Id: I9244602a8d06fd07d3cc99b2fb8fdf6e07e92cf2
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The Intel compiler defaults to "fast math" mode, which is why those
tests had been failing. So for the test that is trying to check whether
we conform to IEEE strict requirements, turn on strict requirements.
Change-Id: I02f8426b1c8e4241ac10ffff13e8efa224f313b2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Since Connection can be copied, one copy could be used for
disconnecting, but the other's d_ptr wouldn't get updated and would
continue to report as still connected.
This patch fixes that by making it check the internal state. That is
only done after d_ptr is already known to be non-null. Unfortunately,
that is the common path:
if (connect(sender, &Sender::signal, [] {}))
will call an out-of-line function. I don't see a way out.
Task-number: QTBUG-46213
Change-Id: I66a35ce5f88941f29aa6ffff13dfb45dca68a350
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Global (application-level) event filters are supposed to be run only in
the main thread, so ensure that it is the case.
Change-Id: I27eaacb532114dd188c4ffff13d5a17d991b8bd2
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
By adding support for the driver description, we can detect if
we are in VMware. In this case D3D9 and 11 get disabled, so only
the software-based options are in use.
This allows running autotests like tst_qopengl, tst_qopenglwidget,
tst_qgl, etc. in the Qt CI system. There OpenGL 2.x is not available,
so ANGLE is the only option. D3D11 is not an option, so it picks D3D9
by default. However, this results in mystic failures. The stable solution
seems to be to use WARP. This can be achieved by setting disable_d3d9 in
the built-in GPU blacklist.
Change-Id: I937c4b3fa82fc1a2d524b4eb712732722df2070c
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
...by moving common code into the Private ctor,
and catering for C++11 move semantics a bit.
Saves ~1.5KiB in text size on Linux GCC 4.9 C++11 release
builds.
Change-Id: I52ed7e47f76b69500a871844c0920e27fe51a127
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's just a test, but it's in the way of automatic tracking
of inefficient QLists.
Change-Id: I2dcfd81c9e208dab57bb256d7c276ad5303f196c
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Add a cleanup function for the check and disable animations
in tst_qwidgetaction to prevent effect widgets from interfering
(vista style animations).
Change-Id: I043ecb131c8dcd07b6ef10bc75c9e010ab569e85
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Verify the bounding rect of the left hand side of copy/assignment,
not the right hand side (which is passed by const ref).
Change-Id: I5044d269fe0acb5f4484c82da7e030ca33958792
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Addition of new options SSL_KEY, SSL_CERT, SSL_CA, SSL_CAPATH and SSL_CIPHER
to allow SSL-encrypted connections to MySQL databases.
When needed, these options must be specified in the function call
QSqlDatabase::setConnectOptions() before the call to QSqlDatabase::open().
SSL_KEY = the path name to the key file
SSL_CERT = the path name to the certificate file
SSL_CA = the path name to the certificate authority file
SSL_CAPATH = the path name to a directory that contains trusted SSL CA
certificates in PEM format.
SSL_CIPHER = a list of permissible ciphers to use for SSL encryption.
These options replace CLIENT_SSL (which should not be used any more).
Example:
db.setConnectOptions("SSL_KEY=client-key.pem;" \
"SSL_CERT=client-cert.pem;" \
"SSL_CA=server-ca.pem");
[ChangeLog][QtSql] SSL support for MySQL database connections has been added.
Option CLIENT_SSL replaced by SSL_KEY, SSL_CERT, SSL_CA, SSL_CAPATH and
SSL_CIPHER, so that the keys, certificates and cipher can be specified.
Task-number: QtBUG-3500
Change-Id: I8197234b169a818658678d6fcc953c90e83db23e
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
... and enable auto-deletion on it.
This allows users of the function to get rid of their own
cleanup code. They just need to keep the shared pointer alive
for as long as they need it.
Drive-by changes:
- replaced QStringLiterals that were only used as the rhs of op+
- replaced an instance of mid() used as the rhs of op+ with midRef()
- enabled NRVO
Change-Id: I161d39461e020c9e8d473c0810dea2109fe0d62d
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
They didn't show up in the "old" CI runs because they usually pass the second
time they are executed - which the testrunner does. The new CI doesn't do that
anymore, instead we now mark those tests explicitly and will track their record
of passing and failing in the new metrics database.
Change-Id: Id34dd6f792f38995b07b6fec88f833df64de2f8b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This allows for example properties with QMap<Foo, Bar>
[ChangeLog][QtCore] Types in the Q_PROPERTY macro can now contain commas
(for example, QMap<Foo, Bar>)
Change-Id: Ibf5c8c9cf20a7c8b3dfec9e891fb8a9ca1bdba7c
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Size policies can be compared for equality,
so qHash should be overloaded, too.
[ChangeLog][QtWidgets][QSizePolicy] Added qHash(QSizePolicy).
Change-Id: Id219f47ac6cb236efdd73cad7b892c8efd034d5c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Zero is a legitimate size to be returned by bytesFree/bytesAvailable
functions, so change those functions to return some 'invalid' size
in case of an invalid drive.
This is also consistent with the original version from the Qt Systems
framework.
[ChangeLog][QtCore][QStorageInfo] Fixed sizes returned for invalid drives.
Task-number: QTBUG-45724
Change-Id: I312fba521fdf8d52d7a0ac0e46cacca625775e80
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Previously, QStandardItem::operator<() returned true when both
items had invalid data. With MSVC in debug mode (checked
iterators/STL), this triggered an assert in
tst_QStandardItem::sortChildren() since that verifies
that !(b < a) when a < b:
Debug Assertion Failed!
Line: 3006
Expression: invalid operator<
Introduce a stable sort order for invalid items such that
other items are always less than invalid items and comparing
invalid items returns false (indicating equivalence).
Change-Id: Ica0f0d9f001c86973b1941dbcc1faf282e4c47df
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
QSslConfiguration is better suited for these APIs. The ones
in QSslSocket that already have a counterpart have been deprecated.
[ChangeLog][QtNetwork][SSL/TLS Support] Most of the QSslSocket
functions to deal with ciphersuites, certification authorities
as well as elliptic curves have been deprecated in favor of the
corresponding counterparts in QSslConfiguration.
Task-number: QTBUG-46558
Change-Id: I1de03379efcbcab931c20e876e252769fe4279e0
Reviewed-by: Liang Qi <liang.qi@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Jani Heikkinen <jani.heikkinen@theqtcompany.com>
When the server could not be reached, the test previously,
produced:
FAIL! : tst_NetworkSelfTest::smbServer() 'smbclient.waitForFinished(5000)' returned FALSE. ()
- Loc: [tst_networkselftest.cpp(992)]
QWARN : tst_NetworkSelfTest::smbServer() QProcess: Destroyed while process ("smbclient") is still running.
Fix this by:
- Using QStandardPaths::findExecutable to locate the binary instead
of test-wise starting it.
- Add a function to ensure process termination.
- Pass a timeout argument to smbclient and pass an interval
depending on it to waitForFinished(), which should prevent
having to kill the process in most cases.
- Add proper error message
Change-Id: I1cbc76ca69aec7d1e0e880685bed54b0ba7f21c7
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Give the link a name containing time stamp and ensure
it is deleted.
Change-Id: I846c58095acbcd92e7daccfd43a69dd97e95e7b0
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Previously, the path was removed from list returned (indicating failure
to remove) only when the thread's list was empty
(last file in directory). Move the statement up so that removal
happens when it is found in thread's list.
Task-number: QTBUG-46449
Change-Id: Ib79199c731f79357b0e5c17636254fbeb3a754a0
Reviewed-by: Robin Burchell <robin.burchell@viroteck.net>
When trying to do a straight right/left/up/down swipe, a minimal
change in the other direction caused to the gesture to be canceled.
Introduce a threshold for checking such to prevent this.
Task-number: QTBUG-46195
Change-Id: I3e199f2ec0c81d23a16073b1f5b8fff004958239
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
Don't hit the scrollbar with the mouse click
Change-Id: Ie82d8c5c058df9a482e7d5de2fe40681572f19ad
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
make sure it'll work with the new mouse handling as well.
Change-Id: Ia2d567e618b77b0fa3532ee6c335cbdf5e496241
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
OS X has an unreasonably low default for the maximum number of open
file descriptors (256). The unit test creates about 200 threads and each
thread in Qt creates at least two file descriptors (pipe), so the test
cannot execute.
Change-Id: I656367bca6d0a40fb1edb8c72914304db0f429ac
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Since we added font matching by style name, the style name is not just
a derived property and should not be ignored in comparisons.
The QFontDef::exactMatch comparison is left unchanged, since it tests
if a loaded font matches a requested one.
Task-number: QTBUG-30851
Change-Id: I4187c5b993815001f35bcf24dc449059bfdcba6f
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
When a premultiplied alpha changes value because it is rounded to fewer
bits the premultiplied colors may need to be recalculated with the new
value. Otherwise the color will both be wrong and potentially invalid.
Change-Id: I9ec74a22aac73cd7ffab04e180cf2bf35bb4c315
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
As discussed on the development mailing list, the new overload is ambiguous
and breaks source compatibility. Therefore this function that is new in 5.5
shall be called readLineInto.
Change-Id: I2aecb8441af4edb72f16d0bc6dabf10cdabf32e2
Reviewed-by: Jan Kundrát <jkt@kde.org>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Implement init() and cleanup() to verify that
no top level widgets are leaked.
- Position widget in tst_QToolTip::task183679() and set
window title.
- Remove hardcoded wait in tst_QToolTip::whatsThis()
and use a find function within QTRY_VERIFY().
- Rearrange and clean code a bit.
Change-Id: I0b1ad88444fc9441c1071a2527f75de1f68ea9e5
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
- Use QTRY_COMPARE() in touchBeginWithGraphicsWidget.
- Change raw event translation tests to wait for the
window to become active to avoid WM positioning issues.
- Blacklist the raw event translation tests on Linux.
Task-number: QTBUG-46266
Change-Id: I73aae375ee279a518a2a083d0ce8919cce474cb3
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
QTextLayout::additionalFormats setters and getters using QList<FormatRange> have
been deprecated; port to the QVector versions.
Moved op== definition for FormatRange needed in tst_qsyntaxhighlighter.cpp
to a friend declaration in FormatRange itself, because MSVC 2008 doesn't find
it otherwise.
Change-Id: Ibab6589df057f02377d895079b56395859e3401e
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
When invoking a macro with less argument than it expect, we would
crash trying to access the vector of arguments from the invocation
as we are trying to substitute an argument.
(Note that we do not show an error in case of argument mismatch
because ithat might happen parsing valid code as moc's c++ parser
is not 100% accurate (that was QTBUG-29331))
Task-number: QTBUG-46210
Change-Id: I3f08d7f5049e593a5bdc02a594ea63cadf66e7a4
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
The pattern "mySet.intersect(other).isEmpty()" has been spotted in
the wild and in Qt codebase. intersects() is much cheaper because it
bails out as soon as we find one common item and doesn't do any
allocations.
[ChangeLog][QtCore][QSet] Added intersects().
Change-Id: I44a350dc4cdb9deb835a23eee99fc99d6ca24c82
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Add CONFIG += testcase to the .pro file which was missing.
The test thus was never executed by make check and left to
rot.
Fix up code:
- Remove module includes.
- Introduce explicit constructors taking parent object
for helper classes, removing calls to setParent().
- Ensure test does not leak objects by converting pointers
to stack variables or introducing QScopedPointer, verify
by checking for an empty window list in cleanup().
- Simplify code by removing unneeded variables.
- Split up conditions in QVERIFY().
Fix tests:
- Show windows were required when events are sent to
QWidget::windowHandle().
- Invert the conditions checking whether touch events are
accepted by widgets since widgets no longer accept them
by defaults in Qt 5 after
e50416066c.
- XFAIL multiPointRawEventTranslationOnTouchPad()
which started to fail at some point in Qt 5.
- Mark as insignificant on OS X due to crash.
Task-number: QTBUG-46266
Change-Id: I6676d021afb015411a24d97d9b8f7c327d4d3c3f
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The positioning test has been observed to fail on X11.
Change-Id: I58727126a8742de93ec203e9992a9ae1b454f731
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
We have at least 5 different (but equal) implementations of a wrapper
in Qt, and some code uses explicit NSAutoreleasePools. Having a shared
implementation lets us clean up things a bit and makes it easier to
reason about which pools are actually needed.
Change-Id: I2fd8eefc3ae7308595ef9899b7820206268362a5
Reviewed-by: Tim Blechmann <tim@klingt.org>
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Two (?) tests can fail: what they actually try to test is that our application
quits on the second single shot timer (2 s. timeout) and not on the first one
(timeout 1 s.) - on the first timeout we either ignore event, or we still have another
window and should not quit yet, on the second timeout we actually do quit the app.
The test checks this in a quite fragile way, counting the number of timeouts for the third 100 ms
timer. It looks like on OS X (VM-only) there is some delay (~500-600 ms) before we receive the
first timeout so the count is always 14 or less, making the test to fail.
Change-Id: I9e8728e6c956025d91528f4195982767a5d3d320
Task-number: QTBUG-46164
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
baselineexample.pro is missing CONFIG += testcase, so,
make check succeeds without doing anything. The test seems
to connect to some network server to retrieve baseline images,
but that infrastructure apparently no longer exists.
Change-Id: I98f4fe5ef8a508fda90e408df2781a944eb99a60
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
QTreeViewPrivate::updateScrollBars depends on a correctly set up
viewItems vector. If a delayed layout is pending, we must call
QTreeViewPrivate::executePostedLayout before accessing any stored model
indices.
Task-number: QTBUG-45697
Change-Id: I55fcbaf81f225b26181c2cf739283740b85dd16a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Do not try to automatically register the meta type for Q_GADGET that
are not default constructible.
This fixes a source incompatibility in the function pointer syntax
of QObject::connect when such types are used as an argument of a signal.
Task-number: QTBUG-45721
Change-Id: I3065f6d57bc1f37e16988d2dee99118de250ca56
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Convenience to avoid annoying detaching (instead of using at()),
especially on temporary vectors (returned by functions or so).
[ChangeLog][QtCore][QVector] Added the convenience constFirst
and constLast functions.
Change-Id: If61b1f0096f6a7a1c9074340e237cc2376ce3d18
Task-number: QTBUG-46026
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Remove the insignificant_tests CONFIG option in favor of a BLACKLIST
file. The tests blacklisted have been found using CI builds logs.
Change-Id: Iffc9043654a9dcd97d55e262011c8daff6f4e60f
Task-number: QTBUG-25300
Task-number: QTBUG-45502
Task-number: QTBUG-46325
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
To cover the situation that the process ID got reused, the current
process name is compared to the name of the process that corresponds
to the process ID from the lock file.
If the process names differ, the lock file is considered stale.
[ChangeLog][QtCore][QLockFile] Detection of stale lock files got more
robust and takes the name of the process that belongs to the stored
PID into account.
Task-number: QTBUG-45497
Change-Id: Ic3c0d7e066435451203e77b9b9ce2d70bfb9c570
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Convert vertical wheel events to horizontal for two cases of
the items layout when vertical scrolling is impossible:
1) TopToBottom flow with wrapping
2) LeftToRight flow without wrapping
Do it only for pure vertical events to avoid a mess for such
devices as touchpads or Apple Mouse.
[ChangeLog][QtWidgets][Important Behavior Changes] Allow
horizontal scrolling with a vertical mouse wheel for QListView.
Task-number: QTBUG-37007
Change-Id: Ie2525153fa7b443d27ca08cc5f5d4d7ecdb8c183
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This function was introduced alongside the support for Unix file
descriptors, so it's a good indicator of whether Unix FDs are
supported. Ever since dbus_minimal_p.h, however, DBUS_TYPE_UNIX_FD may
be defined even if the system libs don't support it.
In order to fix this issue, I had to fix what was apparently a merge
conflict resolution mistake and remove the #ifdef around the test. Doing
the latter is a good idea due to moc being unable to find <dbus/dbus.h>.
This was tested with both linked and dynamically-loaded libdbus-1.
Task-number: QTBUG-46199
Change-Id: I66a35ce5f88941f29aa6ffff13dfb4b5438613a3
Reviewed-by: Jani Vähäkangas <jani.vahakangas@theqtcompany.com>
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
Otherwise the type is registered with the wrong name
Change-Id: I68ec3a05e2528816626e648b46ccc9d70b004866
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
These changes are required to make event delivery from
test lib synchronous.
Change-Id: I8f7093a2bfe01dfa1b0315620d672e7346a7a23a
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Include class name, object name and file name when available.
For the bug in question:
QIODevice::read: device not open
becomes
QIODevice::read (QTcpSocket, "QFtpDTP Passive state socket"): device not open
Adding a static function also makes it easier to set a breakpoint
and find the culprit.
Task-number: QTBUG-46112
Change-Id: Ic181d8ab292912d1acbcc3cb84d9679fe4842ca0
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
The test fails on all ubuntu versions, not only 14.04 as far
as I can tell.
Change-Id: I1e204f68bbb791eef25338f0ed007942a2eb22ff
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The resizeColumnsToContents test would fail on some machines, as the
requested 40 pixels where to small to accommodate the header size hint
as well. Raising it to 60 pixels helps make the test pass.
Change-Id: I2a5026fd18425e236849a1cef25ba8d899c7ae5a
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
This should allow us to make the rest of 14.04 enforcing
Change-Id: I37f6751e8b966b047d1bd2e49ba9482e5846acb1
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Otherwise, make check does nothing, always succeeding.
Change-Id: I0fe04697e02ab0f33cd9aebb550777e200c70804
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
the functionality is now covered by the qmakelib test.
Change-Id: Id627f573fb247ff3b86558509e27b6a9862c1a59
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
the idea was to speed up optimized msvc compilation, but it didn't help.
still, it's better structured that way.
Change-Id: I4b2108d02a47ef8ef704b0b542b0f281bff20165
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
also adds documentation, which is kind of a sanity test. ehm.
Change-Id: I6b520e8b505a2bfbb1e376fa72be0f140227a3a4
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
freeData() takes a Data*, not a QContiguousCacheData*.
Task-number: QTBUG-45783
Change-Id: I96d7ac38dac24b418138ffff13d7fdf09b1d6b07
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reduce the size of .text section in QtCore by 4.5KB and in QtNetwork
by 26.5KB.
Change-Id: If7998776166b9681c1e4b24c51d40444aa996d7a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
If the internal queue contained multiple events, but the first one did
not select any transitions, the external event queue would be checked
before the remaining events in the internal queue.
Change-Id: I1a7f49afdefaaf2b4330bf13b079b61344385ea0
Task-number: QTBUG-46059
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Standalone files are added by using RESOURCES += file.txt, while
collections of files are defined as collection.files = f1.txt f2.txt
and then added using RESOURCES += collection. For collections a prefix
can also be set using collection.prefix = /foo. The standalone files
are not prefixed.
Change-Id: I8236808238414da05e744f799a1bb15a72f4a46f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
QCursor::setPos with Cocoa integration is calling CGEventPost. Some time is required
before the cursor position is really set, so we can not immediately call QCOMPARE.
Change-Id: I83a4c13f06ec151a4b9ab18c83de1eb5247ea9cc
Task-number: QTBUG-45553
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
Reviewed-by: Caroline Chao <caroline.chao@theqtcompany.com>
The test is marked as XPASS in CI. This change follow 201bf9e673.
Change-Id: I0938b1417f792aa88fc1b40c08e7cd810e7d22f7
Task-number: QTBUG-22326
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Prior to this, moc would not generate the function unless the
gadget class had a property or a non-constructor invokable.
Change-Id: Ic020ea5f8f59702f5e9e194a46e26850e53e5cfe
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
An error similar to the one below would be emitted
by the compiler on the moc generated file:
error: assigning to 'QObject *' from incompatible type 'Gadget *'
if (_a[0]) *reinterpret_cast<QObject**>(_a[0]) = _r; } break;
Change-Id: I75ae7bd6c46d20db2d47a80eaa08aae302d7d6c8
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This test has been initially blacklisted. However it is racy by design
and cannot be fixed. Removing it.
Change-Id: I6c386a12e54d8a382f17c4fc033428f56eb03f02
Task-number: QTBUG-23837
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
QMachOParser is defined in the private header that only gets included in
developer-builds. Thus ifdef its usage out, not just the header
inclusion.
Change-Id: I1e0059787be6eb70bd1661c7814e69eee7c5b2ee
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Make it possible to read images with EXIF orientation automatically
applied. This was originally implemented without opt-out in Qt 5.4, but
reverted. Here it is implemented as opt-in for JPEG, and opt-out for TIFF
to keep behavioral consistency.
The EXIF support for JPEG was written by Rainer Keller.
[ChangeLog][QtGui][Image plugins] An option has been added to
QImageReader to enable automatic application of EXIF orientation.
This behavior was default in Qt 5.4.1, but reverted in Qt 5.4.2.
Task-number: QTBUG-37946
Task-number: QTBUG-43563
Task-number: QTBUG-45552
Task-number: QTBUG-45865
Change-Id: Iaafd2519b63ede66ecc1f8aa4c7118081312b8f5
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
When both scroll bar's policies are set to ScrollBarAsNeeded, make sure
the scroll bars are shown if needed and not show if not. Even the corner
case, where one scroll bar's visibility depends on the other, is handled
properly.
Task-number: QTBUG-45470
Change-Id: I11d6ccf7c0b51644a5ce2d5c3fc59e2e4812755d
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Thorbjørn Lindeijer <bjorn@lindeijer.nl>
ItemIsTristate only makes sense in tree widgets, where it triggers the
auto-tristate behavior between parents and children.
Change-Id: Idfa8bb5d0b9c63fe450115fb58d088929e11c7ff
Reviewed-by: Jarek Kobus <jaroslaw.kobus@theqtcompany.com>
My commit 6c973dee2c broke the case where setApplicationName
is called before the QCoreApplication constructor.
Fixed and added autotest.
Task-number: QTBUG-45283
Change-Id: If7bdb0d82be50b50a95a04027f5f9d7143c1a7ac
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
As usual, user code connected to signals emitted from Qt may destroy
an object's internal status while a signal is being emitted.
Guard a bit QDialogButtonBox signal emissions to prevent
crashes in case the button or a dialog get deleted from a slot
connected to clicked(). Also, be sure to emit the corresponding
accepted/rejected/etc. signal.
Change-Id: I7b1888070a8f2f56aa60923a17f90fb5efef145c
Task-number: QTBUG-45835
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Because if it doesn't, then calling dbus_type_is_fixed or is_basic may
result in a failed assertion.
process 16304: arguments to dbus_type_is_fixed() were incorrect,
assertion "_dbus_type_is_valid (typecode) || typecode ==
DBUS_TYPE_INVALID" failed in file dbus-signature.c line 345.
Change-Id: Idf715b895bac4d56b4afffff13db2ed71b1516a5
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
