The XCB backend runs a thread which gets events out of the XCB event
queue and feeds it to the main thread via another queue. This queue is
protected by a mutex.
However, when the event thread exits, it cleans up after itself and
frees all remaining entries in the queue. This code messed with the
event queue without acquiring the needed mutex and left behind a list
full of stale pointers.
Fix this and protect the freeing with the correct mutex and clear the event
queue afterwards.
Change-Id: Ie49cf6241b76be86d8cebbc931f7226a3f6a14e5
Signed-off-by: Uli Schlachter <psychon@znc.in>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Since QPlatformTheme covers all dialogs whereas QPlatformDialogHelper is
really only for the native dialogs then the SnapToDefaultButton hint is
moved as it has relevance for all dialogs
Task-number: QTBUG-32631
Change-Id: I1dce0bb4abcd4cfd39c4a199a33fc7078176ab4b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Documentation is generally not translated, this one sticks out.
Task-number: QTBUG-28535
Change-Id: Ib2cdbc8c94a6354af3369ff2dcf4df69cde4c381
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Geir Vattekar <geir.vattekar@digia.com>
On BB10, NAVIGATOR_WINDOW_INACTIVE is called before
NAVIGATOR_WINDOW_INVISIBLE, already triggering handleWindowGroupDeactivated()
Change-Id: I7d82c0220fe8dc8e87bfa2b31af6085c7d1d6cee
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Bernd Weimer <bweimer@blackberry.com>
Reviewed-by: Nicolas Arnaud-Cormos <nicolas@kdab.com>
On Playbook, rendering should happen when the application is thumbnailed,
therefore we need to send a window activated event to resume rendering once
the thumbnail is restored from the minimized state.
Change-Id: I0fa5da483dc101e25f718e52859a66edfe5c66c7
Reviewed-by: Bernd Weimer <bweimer@blackberry.com>
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
Reviewed-by: Nicolas Arnaud-Cormos <nicolas@kdab.com>
Gcc 4.8 uses dwarf-4 by default which is not supported
by the GDB that is officially shipped with the NDK.
Change-Id: I913a038e095df52b0defd5d3da2606ef2e5456b7
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
The 4.7 version of the toolchain in the NDK has been
obsoleted by the introduction of version 4.8. The default
can still be overridden if necessary.
Change-Id: I042ded92e50dc5ebc4d54ffccc2e6856fc3edba0
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We retain each modal NSWindow as long as its modal session is running,
and we should release it every time that modal session ends.
Task-number: QTBUG-32728
Change-Id: Ia30c9c2d15be1350e7150a0d3c2f530a2fe4f38b
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
This would also cause an extra paint in QQuickStyleItem, resulting
in the frame being erased for those styles not having a frame width
set (e.g., fusion and GTK).
Change-Id: I7a9371c540cd31fd9f1400a51c4ec57582996dd2
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
There wasn't any example documentation besides json.html, which doesn't
actually describe usage of the various QJson* classes.
This also makes each QJson* class page link back to json.html.
Change-Id: If5ad6493d2728df0cec7bdbbc5790f0b755f816c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This enables both modes for TalkBack,
explore-by-touch and the normal swiping mode.
It is partially inspired by the BarGraphView example
of the Google/Android Eyes-Free project.
Note that for any accessibility to work you'll need
a device with api level 16 at least.
Using reflection we should be able to dynamically pick up
the classes if we have the high enough api level.
Change-Id: I11b93bead451483782a1711434d45c8f9a35996f
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
The API is broken and available in individual functions.
Don't make it more complicated than necessary to implement
the interfaces for new widgets.
Change-Id: Ie408c369ef05b2b8e7ac666b25153d090fcf3aae
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Since we await giving focus to a focus object until a press
release, it also makes sense to await activating a window until
a press release, since they both have to do with focus. By doing
so, the input panel now stays open if the user selects a line edit
in one window when a line edit in another window still has focus. We
also avoid activating a window in case of a touch cancel (e.g as
a result of the user flicking or triggering a gesture).
Change-Id: Ic00c4be69c257fceb10ce2d5a81cb490ea93710f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
qdoc's \include command now works as expected.
This command is only for including a file that
contains qdoc comments that contain qdoc commands
to be processed by qdoc. The file to be included
should have the .qdocinc suffix, although qdoc
will accept any suffix now. The file must be in
one of the directories specified by the sourcedirs
variable in the qdocconf file.
Task-number: QTBUG-33046
Change-Id: I45ea08932b4218aae369469968117fb5132f764b
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
To avoid duplicate files for examples, the files
are named this way. Suppose you have an example
called mandelbrot. The example is in a subdirectory
named mandelbrot, and there is a \example command
somewhere like this:
\example mandelbrot
In this case, the mandelbrot example is in the QtCore
module. Then the name of the example page will be:
"qtcore-mandelbrot-example"
...and the names of the example files will be:
"qtcore-mandelbrot-main-cpp.html"
"qtcore-mandelbrot-mandelbrot-pro.html"
"qtcore-mandelbrot-mandelbrotwidget-cpp.html"
"qtcore-mandelbrot-mandelbrotwidget-h.html"
"qtcore-mandelbrot-renderthread-cpp.html"
"qtcore-mandelbrot-renderthread-h.html"
Task-number: QTBUG-32580
Change-Id: Ic4445fd65b679523d6d94a8b0c19289d049ef0b0
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Don't use the 'emit' keyword in the moc generated code for properties
with MEMBER
Task-number: QTBUG-33094
Change-Id: I5a0950e9c7a0dee347a6a6c79098e3e7d4776014
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This may happen when we have namespaces and the qualified name is used
to scope an enum.
Task-number: QTBUG-32933
Change-Id: Ic4923bbfb138387bae1e3694172661ace8342089
Reviewed-by: Alan Alpert <aalpert@blackberry.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
After sending authentication, we need to revert all states to be able
to read the HTTP header again. Before, we would not try to read an
HTTP header after sending authentication.
Change-Id: Id4b95eda9881a37bcfbae0570756bb3e4918a568
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Shane Kearns <shane.kearns.qt@gmail.com>
Due to forcing java 6 we need to pass the
bootstrap jar file (android.jar).
https://blogs.oracle.com/darcy/entry/bootclasspath_older_source
Change-Id: I530a7e2a7df40813011a6dde93d6ccc3aaaa61d6
warning: [options] bootstrap class path not set in conjunction with -source 1.6
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
moc's C++ is not 100% accurate, so better process the invalid macro with
a warning rather than an error.
Such errors occurred in the QSKIP macro with variadic arguments since
that macro is defined conditionally.
It is also causing problem in boost header (cf task QTBUG-29331)
Task-number: QTBUG-29331
Change-Id: Ice6a01b675286540d6470c8e36920b7efd39b540
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
I have not located any significant behavior changes in this,
and it is annoying having too much similar code in different
branches.
The main change is a removal of Qt::AlignLeft, but
the icon Label should be in its own column.
Change-Id: Iaf07fc503075e61e2af1a93d5fc9e6e34a24451d
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
This patch moves some layout handling to a new function.
That will be helpful later since we can re-use the new function.
Change-Id: I4cc846f9958d9530ec2b07292093b94bd27ee055
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
They are:
3 Intel 80386 or equivalent
4 Intel 80486 or equivalent
5 Intel Pentium, Pentium MMX, AMD K6 and a few others
6 everything since the Intel Pentium Pro and AMD Athlon
By necessity, this means all 64-bit builds have a family of 6. That
matches the family number that the CPUID instruction produces.
Change-Id: I5dc7344976f8da65938f44310b89ade4fe3f1a28
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Rather than trying to make it lock-free (which requires double-bookkeeping of
4 atomic ints!), just lock the mutex before calling it.
tst_bench_qthreadpool shows no difference whatsoever between the two
solutions, I get 0.005 msecs per iteration in startRunnables().
Of course looping over calls to activeThreadCount() is a bit slower,
from 0.0002 msecs per iteration to 0.00027 msecs, i.e. 35% more.
But polling activeThreadCount() from the app is a really wrong thing to
do anyway, this benchmark was just for my own curiosity about the
price of a mutex in a function that sums up 4 ints.
What matters is start() performance, which is unchanged (0.00007 msecs
is just noise compared to a 0.005 total, that's 1.4%).
Change-Id: I993444eef8bc68eff9badd581fae3626dfd1cc6d
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This fixes the wrong value for path() and fileName() when a
path or file name actually contains a '%'.
userInfo() and authority() are not individual getters, they combine
two or more fields, so full decoding isn't possible (e.g. username
containing a ':').
[ChangeLog][Important Behavior Changes][QUrl and QUrlQuery]QUrl now
defaults to decoded mode in the getters and setters for userName,
password, host, topLevelDomain, path and fileName. This means a '%'
in one of those fields is now returned (or set) as '%' rather than "%25".
In the unlikely case where the former behavior was expected, pass PrettyDecoded
to the getter and TolerantMode to the setter.
Change-Id: Iaeecbde9c269882e79f08b29ff8c661157c41743
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The current question is whether activeThreadCount() should be lock-free
(using atomic ints) or mutex-protected, so this tests start()
and activeThreadCount() directly.
Change-Id: Ica4a2ad023c2002e3c7d81558e6b9ee64af7f690
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The XCB port is still incomplete and needs Xlib in several places.
The configure script should reflect that and make sure Xlib is present.
Change-Id: I6d81ea6cacef56084cf7ccfbcf908d597aae918f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Calling them and not using the return value makes no sense.
And it's even worse -- in autotests people might call those
functions without wrapping them in QVERIFY(), effectively
not testing anything.
Change-Id: I2c90d1c85963ff1f35f00653d536a9252c2fcc48
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The XCB platform plugin is the only one that requires Xrender.
Change-Id: Iac2efa31b4b51e38305ee5f635fe38b75c7752de
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
In delegates we get into trouble with calling showPopup in
setEditorData (edit by double click) - and that is not reasonable.
The user has requested edit - and therefore it is natural to save
a click for the user and show the popup at once.
However that fails since we have the mouse down and as soon as we
release the mouse we will call hidePopup.
This patch ensures that the mouseReleaseEvent, that caused the
problem is only considered if we have had a mousePressEvent.
Change-Id: Ibe031fcb9ad2158f6969e41127bbb5f651b9cae6
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The anonymous union isn't supported and can be replaced with a reinterpret_cast.
Change-Id: Ic76a31f36e61d910db16312d7a6c4bdc728aa825
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Layered (translucent/non-opaque) windows do not receive WM_PAINT,
expose events need to be generated. Improve
6800728d09 to handle transient
children as well.
Task-number: QTBUG-17548
Change-Id: Id113604512692dfbea1f2b10d0db3068213cf599
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Forward-port of 9ce60ff509c4ff27fe861fc5b2080f50897a68c4 (Qt4Macros:
Allow specifying a TARGET in invokations of macros., 2013-02-26)
from cmake.git.
This causes the INCLUDE_DIRECTORIES and COMPILE_DEFINITIONS to be
used from the specified target when running moc.
Change-Id: I868a35ade3c6b059e64d226291cf2046709d86d4
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This is new in CMake 2.8.12 and replaces the old properties
matching IMPORTED_INTERFACE_LINK_LIBRARIES_<CONFIG>.
Change-Id: I5d4c454972f2535f6792e95718c73d80c56ac24c
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
