Don't highlight the example until it's updated to use a new version
of the Twitter API.
Task-number: QTBUG-31745
Change-Id: If7f9ac3391c549f48cfebcdbe6bdcd12eb4a3e13
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Use the manifest meta-content system to add suitable tags for Qt WebKit
examples.
This enables users to filter for them in Qt Creator Welcome mode by
typing 'webkit'.
Change-Id: Ie9b5f6ff9f455dd3d8f7c64e5f73e30ff021f208
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
These two widget-based, mobile-targeted examples are obsolete, defunct,
and/or serve no purpose in Qt 5.
Task-number: QTBUG-31023
Change-Id: Ie5732734bb2547b1ea701d7b3c8dcd806362de09
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Add an 'isHighlighted' attribute to selected examples to bring them
to the top on Qt Creator Welcome mode/Examples tab.
Task-number: QTBUG-29354
Change-Id: I6c72c11f1f8359d889649ff5b7f91e5c4de583bd
Reviewed-by: Thomas Hartmann <Thomas.Hartmann@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
-the externalsites from qtdoc is being removed and the new copy is in
qtbase/doc/global.
Change-Id: I8f509acf05c0e1f399205daf4e4831cf46475746
Reviewed-by: Venugopal Shivashankar <venugopal.shivashankar@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
-This should allow any Qt 5 module which inherit qt-module-defaults
to link to the Qt Creator Manual.
Change-Id: If413fe299fa604d16c06fa261024c1a12be24b09
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
This token must be ignored by qdoc's hapless C++ parser.
Task-number: QTBUG-29444
Change-Id: I02a0c5926a3fa6284648a632341e38614a237a30
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
This should avoid QDoc warnings when the macro
is used with the signals and slots.
Task-number QTBUG-30105
Change-Id: I8d1b32854c15ff07e6ece7b326be38666ae29c3f
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
Remove all trailing whitespace from the following list of files:
*.cpp *.h *.conf *.qdoc *.pro *.pri *.mm *.rc *.pl *.qps *.xpm *.txt *README
excluding 3rdparty, test-data and auto generated code.
Note A): the only non 3rdparty c++-files that still
have trailing whitespace after this change are:
* src/corelib/codecs/cp949codetbl_p.h
* src/corelib/codecs/qjpunicode.cpp
* src/corelib/codecs/qbig5codec.cpp
* src/corelib/xml/qxmlstream_p.h
* src/tools/qdoc/qmlparser/qqmljsgrammar.cpp
* src/tools/uic/ui4.cpp
* tests/auto/other/qtokenautomaton/tokenizers/*
* tests/benchmarks/corelib/tools/qstring/data.cpp
* util/lexgen/tokenizer.cpp
Note B): in about 30 files some overlapping 'leading tab' and
'TAB character in non-leading whitespace' issues have been fixed
to make the sanity bot happy. Plus some general ws-fixes here
and there as asked for during review.
Change-Id: Ia713113c34d82442d6ce4d93d8b1cf545075d11d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
-added style for JavaScript code blocks
-code blocks is scrollable when viewed in a narrow window
-improved alignment of table of contents
Change-Id: I45acdb4c7aa0ae57fe030e7e68a230c1a7d41b8f
Reviewed-by: Geir Vattekar <geir.vattekar@digia.com>
This change makes qdoc support additional attributes and tags written
to example/demo manifest files. The goal is to enable highlighting of
selected items, as well as having additional content to make searching
for specific categories work better in Qt Creator welcome screen.
This meta-content is stored in manifest-meta.qdocconf, which is loaded
globally for all modules.
Tag handling is also changed to use a QSet to eliminate possible
duplicate tags.
Task-number: QTBUG-29354
Change-Id: I2c4b2dff6229172efbecc2bfc1c269017edc4d56
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
This macro is useless from Qt 5.1 on, so:
- Remove comment about using QT_BEGIN_NAMESPACE after QT_BEGIN_HEADER
- There is no need to blacklist these in qt-cpp-ignore.qdocconf
Change-Id: I2c3ceb3d77d294a606b87f7486071a2350b3d42f
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: hjk <hjk121@nokiamail.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Linguist examples are now in qttools.
Change-Id: I8abfff50d81cda143a080711bf9583e7be777009
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
Remove docs and images for Multiple Inheritance and Text Finder
examples that were moved to qttools/uitools.
Change-Id: I29e8f76b2512e329c354a6d3676c9b2e09e35726
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: David Schulz <david.schulz@digia.com>
-value copied from qt-project.org
-more room between lines of text and the list at the landing page.
Change-Id: Iee995325ded0c803feca44d112c5e73a024917bb
Reviewed-by: hjk <qthjk@ovi.com>
Revert "Doc: Removing entry in CSS for adding icons to HTTP links"
This reverts commit ceb2799163.
Also:
-edited image to use Qt Project brand colors
-removed breadcrumbs from CSS
Change-Id: I3c2e655f8eac463677b20b68bc2ffa0efd2fd468
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Eike Ziller <eike.ziller@digia.com>
-padding should be the same as C++ code snippet.
Change-Id: Idba44d252f411f70b6957161b83626811c1c69f2
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Make them appear in list of touch input examples.
Change-Id: Ia5f489e28771f0a272da9ec7b61de186ca305e36
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
This is a temporary solution to
QDoc bug https://bugreports.qt-project.org/browse/QTBUG-28307
The links will not have the icon.
Change-Id: Ib81bcc9c55cd5f403c85fdd38c0ee71219091e76
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Change-Id: I398a9e46fd9c4beacd9e8554dab544154e48b870
Reviewed-by: Sami Makkonen <sami.makkonen@digia.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
-used Qt Project colors
-changed margins and paddings
Change-Id: If7a533ac3a32debbaca7b403aa68290c2b9aab2c
Reviewed-by: Martin Smith <martin.smith@digia.com>
-Has the Qt logo
-For generating the archives and online snapshot
Change-Id: I88d1d6335c0ba600a62868a25fadaed8a751f2b4
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
No longer needed as the paths are resolved relative to the file.
Change-Id: Id4012336b7de00a5dcf8686e44f7a972e2b8b284
Reviewed-by: Martin Smith <martin.smith@digia.com>
-Moved from qtdoc repository
-included in the default configuration for each module
-grouped links
Change-Id: I544d9232950f50ae9fb877c1a0166ab157f70942
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Venugopal Shivashankar <venugopal.shivashankar@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
All modules wishing to use the default style will get the offline style
in their QCH files.
Change-Id: I37f41f72be7946a6473e6d56d4ef2f6d7c454f47
Reviewed-by: Martin Smith <martin.smith@digia.com>
-Modules only need to include qt-module-defaults.qdocconf
-Sorted the variables.
-The variables still need to be confirmed to be important.
Change-Id: I7b40f665bf6348b668f3bcfd3c5ab4d881ef6aed
Reviewed-by: Martin Smith <martin.smith@digia.com>
The module documentation require these definitions.
Change-Id: Iecef3df5edad761d8c5f67b14783e13952ab2dbb
Reviewed-by: Martin Smith <martin.smith@digia.com>
It seems this is the pattern to follow:
landing page: qtwidgets-index.html
examples page: qtwidgets-examples.html
class list page: qtwidgets-module.html
Change-Id: I3e5459fe650178e0398cb43181b594c0f12a170e
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Change-Id: I846439a9cf7ad965ed27a00f98dbc4ff97abe73b
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
All qdocconf settings that should be used by all Qt modules are now in
qt-module-defaults.qdocconf.
Change-Id: I2a0315a55db3fcbb0160c4392d2da98611043d83
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Gui example documentation should be in examples/gui/doc/
Change-Id: I3cd196a2bb5d76b6e275f336b29a2ad1811159dd
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
We should be using the global qdocconf for the common variables. This
change also allows you to just specify -installdir without using a
templatedir.
Change-Id: I207d279d9b5199212e896fc5ccab5c212b1896c6
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Designer is in the tools repo, we cannot link there.
Mentioning the name should be good enough.
Change-Id: I55193aa31e60ae266a8890f706c332a63ed3610d
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
Updated those .qdoc files to refer to the new relative examples
emplacement. Images and snippets to be moved later.
Also grouped all widgets related examples under widgets.
Change-Id: Ib29696e2d8948524537f53e8dda88f9ee26a597f
Reviewed-by: J-P Nurmi <j-p.nurmi@nokia.com>
Handle 0 WId parameter as meaning "desktop window"/whole screen.
Also, re-add the default values for the grab area, both for
convenience and compatibility with QPixmap::grabWindow() in Qt4.
Update the screenshot example so it doesn't comlain about usage of
deprecated QPixmap::grabWindow().
Change-Id: I2ad229113ddb8ded0388f2ebc0e8c703c6657f1f
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
This fixes a couple of qdoc errors on methods that
are declared as nothrow.
Change-Id: I22bcd18253665280a5c1c3a38539dacf8f869c57
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This fixes a large bunch of qdoc errors in Qt Core.
Change-Id: Ie3c3cebc730081a0927a0998d8937d721719c1c6
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
\img was a macro defined in macros.qdocconf. This collection
of macros is being phased out. Use the full command instead.
Change-Id: Ia55212f87bb46349d61359d40568e0aa33882596
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
-The example no longer exists
Change-Id: I05485e950ca39918117cddee928f3c9da0fe1cb8
Reviewed-by: Paul Olav Tvete <paul.tvete@nokia.com>
Reviewed-by: Martin Smith <martin.smith@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
qws is no longer relevant. These pages are now deleted:
deleted: mousecalibration.qdoc
deleted: simpledecoration.qdoc
deleted: svgalib.qdoc
Change-Id: I6ca77627cc6c018245cf16047b52c1145721e175
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
setUnifiedTitleAndToolBarOnMac will not be supported
on Qt 5, which removes the point of having this example.
The replacement for setUnifiedTitleAndToolBarOnMac
will be a NSToolBar wrapper in the MacExtras module,
and this example will probably re-appear in some form
there.
Change-Id: I46d5e70a7c45625d9334911bb48059e86f05282d
Reviewed-by: Christoph Schleifenbaum <christoph.schleifenbaum@kdab.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
The CSS for the footer is not completely correct, but at this
time it is better to have something than nothing.
Change-Id: I7371e1e458a2abafcdb0fca5564ad73e209d64c3
Reviewed-by: Jerome Pasion <jerome.pasion@nokia.com>
Ensure comma between elements (757 missing), single space and curly-
braces around title elements, etc.
Change-Id: Id16c3fda7fc47a12a0682f8720214f4990609a97
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
The files in this change were still in qtbase/doc/src or required for
it. qtbase/doc/src should now only contain example documentation and
images for the example documentation.
Change-Id: Ia7ca8e7fd2b316e77c706a08df71303bc8294213
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
This change moves the snippets to the modularized directories.
Change-Id: I917dd1dae5ee5d4b6bd5a0390783a8b9a99edc06
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
This change moves the snippets and images to the modularized
directories.
Change-Id: Ib8f8556bcef13593ee40ac1122d765ed307ecb93
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
This change moves the snippets to the modularized directories.
Change-Id: Ifcf22fa3f234681f851d1e7eed5fe44e2e223ffd
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
This change moves the snippets and images to the modularized
directories.
Change-Id: Idec1afb9db7ea6add1ca4cf25ec4019d8bce0c4d
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
This change moves the snippets and images to the modularized
directories.
Change-Id: I5f86f598fbe7c47d632c613b85d94ced89ba2c29
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
This change moves the snippets and images to the modularized
directories.
Change-Id: Idacff866735d00b048d65318bc4c3ee1dfa16310
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
This change moves the snippets and images to the modularized directories.
Change-Id: If52f69c0f8bb4d2df4ee46f5524a82047ec214de
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
This change moves the snippets and imagesto the modularized directories.
Change-Id: If14912692a7f72d7de345eaf88d9ec9752310fca
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
qmake can't parse /* C-style comments */. The license headers in these
files should use # as the comment delimiter. However, .pro files anyway
don't need license headers, so just remove them.
Continues from commit 8dea797015, which
removed the header from one file.
Change-Id: Ib227aabb27224fc1fe89b7ced4fbbf7b1af8b193
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
Changes:
- XML processing document moved from Qt XML Patterns.
- Moves documentation from /doc/src to /src/xml/doc
- Add new qdocconf file.
Change-Id: I4bc2104714a28905304997e5ff252e662ddf0bee
Reviewed-by: Jerome Pasion <jerome.pasion@nokia.com>
This change fixes most qdoc errors in QtCore. There are about 900 left.
The main thing this change does is moving documentation from qtcore from
/doc/src to /src/corelib/doc.
Other issues resolved are mis-use of qdoc commands.
Change-Id: I002d01edfb13575e8bf27ce91596a577a92562d1
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@nokia.com>
Algorithmic complexity attacks against hash tables have been known
since 2003 (cf. [1, 2]), and they have been left unpatched for years
until the 2011 attacks [3] against many libraries /
(reference) implementations of programming languages.
This patch adds a qHash overload taking two arguments: the value to
be hashed, and a uint to be used as a seed for the hash function
itself (support the global QHash seed was added in a previous patch).
The seed itself is not used just yet; instead, 0 is passed.
Compatibility with the one-argument qHash(T) implementation is kept
through a catch-all template.
[1] http://www.cs.rice.edu/~scrosby/hash/CrosbyWallach_UsenixSec2003.pdf
[2] http://perldoc.perl.org/perlsec.html#Algorithmic-Complexity-Attacks
[3] http://www.ocert.org/advisories/ocert-2011-003.html
Task-number: QTBUG-23529
Change-Id: I1d0a84899476d134db455418c8043a349a7e5317
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
This class is meant to replace the QUrl functionality that handled
key-value pairs in the query part of an URL. We therefore split the
URL parsing code from the code dealing with the pairs: QUrl now only
needs to deal with one encoded string, without knowing what it is.
Since it doesn't know how to decode the query, QUrl also becomes
limited in what it can decode. Following the letter of the RFC,
queries will not encode "gen-delims" nor "sub-delims" nor the plus
sign (+), thus allowing the most common delimiters options to remain
unchanged.
QUrlQuery has some undefined behaviour when it comes to empty query
keys. It may drop them or keep them; it may merge them, etc.
Change-Id: Ia61096fe5060b486196ffb8532e7494eff58fec1
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Use these macros to tell the compiler about conditions that may
happen, so it will generate better code. But do not assume that they
will do anything special.
Change-Id: I89ec4f65f48a9340ccf5ffc4ae4b8c3d8897c8b1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QWorkspace had been called Q3Workspace before Qt4.0 finally released.
In a sense, it is a Qt3 support Widget. And QWorkspace has been
deprecated and replaced by QMdiArea at Qt4.3.
Change-Id: Iea1bf831c9960c23c2b21d51fdc7c13b303642ea
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
According to the new module name convention, QtSql should be replaced
with Qt SQL in documentation.
Task-number: QTBUG-24775
Change-Id: I712ef17c8245d30fe5e3cf879ef6e3e6aa2ff75c
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
Added support for QString overloads taking a QRegularExpression.
Change-Id: I8608ab0b66e5fdd2e966992e1072cf1ef7883c8e
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Added QRegularExpression, QRegularExpressionMatch and
QRegularExpressionMatchIterator as PCRE-enabled, regexp classes.
Documentation is included, as well as a first round of autotests.
Task-number: QTBUG-23489
Change-Id: Id47031b80602c913ccd2fd740070e3024ea06abc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This is an xev-like program. A user clicks a mouse button inside the
Window, and the program displays (a) the "raw" button number; (b)
the corresponding Qt::MouseButton name; and (c) the type of mouse Event.
Task-number: QTBUG-24112
Change-Id: I8a76ff37b5b85639f662706072cc4a2ce490754b
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
QDoc now has support for Doxygen style commands for italics, bold
and list items. This change applies that change in QDoc to the
actual documentation.
Task-number: QTBUG-24578
Change-Id: I519bf9c29b14092e3ab6067612f42bf749eeedf5
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QMetaType::Void was ambiguous, it was pointing to a valid type (void)
and in the same time it was signaling errors in QMetaType. There was
no clean way to check if returned type was valid void or some
unregistered type.
This feature will be used by new QMetaObject revision which will
store type ids instead of type names. So it will be easy to
distinguish between:
void mySlot();
MyUnregisteredType mySlot();
Change-Id: I73ff097f75585a95e12df74d50c6f3141153e771
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
In Qt5 the meta-data format will be changed to not store the
method signature string explicitly; the signature will be
reconstructed on demand from the method name and parameter type
information.
The QMetaMethod::signature() method returns a const char pointer.
Changing the return type to QByteArray can lead to silent bugs due to
the implicit conversion to char *. Even though it's a source-
incompatible change, it's therefore better to introduce a new
function, methodSignature(), and remove the old signature().
Task-number: QTBUG-24154
Change-Id: Ib3579dedd27a3c7c8914d5f1b231947be2cf4027
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Support pixel-based deltas as well as sending
dx and dy values in the same event. Keep source and
behavior compatibility with Qt 4.
New API:
QPoint pixelDelta() const
QPoint angleDelta() const
Deprecate delta() and orientation().
Both pixel-based deltas and combined updates are
necessary for smooth trackpad-based scrolling on
OS X.
Qt 4 compatible behavior is achieved by sending an
extra wheel event in cases where the initial event
has a combined dx and dy update. This extra event
sends dx in delta() and orientation(), with pixelDelta()
and angleDelta() set to null.
Modify the Cocoa implementation to provide pixel
deltas. It is expected that not all platforms can
provide these. Angle deltas will always be available.
Change-Id: I20c10f0df338ddcd6a3f7a4d40949ed5ae3b4795
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Q_WS_WIN does not exist any more.
Change-Id: Icb7f542cfcd4d21e994f246ff665583cb6b57610
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This is replaced by parent(), child() and relations()
Change-Id: Iabff6ec56176a1ca8465d6480860f6e0174fd134
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
History of the development before the import:
ssh://codereview.qt-project.org/playground/mimetypes.git
Mimetype definitions come from shared-mime-info where available (UNIX systems),
loaded using a mmap'ed binary cache generated by update-mime-database.
As a fallback if no cache is found, we parse the raw XML files otherwise.
This makes the MIME type support fast and with very low memory usage on UNIX,
and it makes it easy to use on Windows (no dependency on shared-mime-info,
Qt even includes a freedesktop.xml file to use if none are found on the system).
Change-Id: I27b05008216ff936dc463bd80d3893422bfb940e
Reviewed-by: Richard J. Moore <rich@kde.org>
The QTextStream paragraph that is removed referred to something that is
incorrect. This was confirmed for Windows, Linux and Mac.
Change-Id: Ibac8f82482f2060308b5b8485d6da228bdf52fe6
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
(cherry picked from commit 80cebfde10cf34dcc0777c24f1b3ff37cad20181)
Ensure consistent conversions by not using the system default locale.
Change-Id: I60db9fc4f465c0254f3213419e57d7879aaddd65
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This has only been around as compatibility interface for Qt4
but is now replaced by QPlatformInputContext.
Change-Id: I677dbbea46311bf39f6c5ca9dc3fb5009abe924a
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This provides a stronger mechanism e.g when inheriting QItemDelegate.
It makes some things much easier e.g avoid delete of an editor
and maybe only delete depending on what the editor says itself.
This introduces a new virtual function.
Task-number: QTBUG-2299
Change-Id: I8410f8199775987dbacffd99e4c354fdadcdd21f
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Record the file, line, and function where a qDebug, qWarning, qCritical
or qFatal call happens, and make this information available in a custom
message handler.
The patch uses the C preprocessor to replace qDebug, qWarning, ... with
a line that also records the current file, line, and function. Custom
message handlers can access this information via a new QMessageLogContext
argument.
Change-Id: I0a9b89c1d137e41775932d3b1a35da4ebf12d18d
Reviewed-by: David Faure <faure@kde.org>
The QDnsLookup class provides asynchronous APIs for performing
DNS lookups. For now, the following lookups are supported:
- A and AAAA
- CNAME as defined per RFC 1035
- MX as defined per RFC 1035
- NS as defined per RFC 1035
- PTR as defined per RFC 1035
- SRV as defined per RFC 2782
- TXT as defined per RFC 1035
Task-number: QTBUG-10481
Change-Id: I46c1741ec23615863eeca3a1231d5e3f8942495e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The MNG file format is generally abandoned, and libmng has been
unmaintained for several years.
The MNG plugin and bundled libmng has been moved to the
qtimageformats project on Gerrit.
Task-number: QTBUG-21869
Change-Id: I946432347014ffde2b72307a5f8b166ca5553602
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
The resetModel() signal indicates that the model is reset. Previously
there was no note that the signal is emitted also when endResetModel()
is called.
Task-number: QTBUG-23755
Change-Id: I6c3c1ccef580e9c1112c3af79912cffca675e140
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This imports the JSON support for Qt 5 from
playground/qtbinaryjson.
It adds a fast, fully compliant json parser, a
convenient C++ API, conversion to and from
QVariants and a binary format for JSON that is
extremely fast to use together with the C++ API.
Change-Id: If9e3a21a4241d388d0abaa446b6824f9cc6edb1c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Removed the reference to Symbian plugin, and added the reference to
ConnMan / oFono plugin.
Change-Id: I6a2ea9159aaa05bf4109bae97889d126a324ef8b
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Alex <alex.blasche@nokia.com>
Let's follow the other places in qtbase where the
directory is named corelib.
Change-Id: Ib426f4ee7311f622a89b252b9915aca1d3dd688d
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is a fix for problems introduced by bf7f170.
Change-Id: If5dd8e031ef2efea578b3efb188c2e950e1ba41a
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
All references to QFtp in documentation have been removed, QFtp's
documentaiton was marked internal. The QFtp example was removed.
Task-number: QTBUG-23199
Change-Id: Ifff83cac069fb350e8ebeae63e605850e65c0c30
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
The previous change missed some headers from years prior to 2011, and a
few new files were merged after the previous change.
Change-Id: Ib7d1a2b7062228c2a5373da64242b2ee1f0981e1
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
These snippets are used on the module pages in qtbase.
Change-Id: I755897176275288521cd557fd82b0687181b302b
Reviewed-by: Jerome Pasion <jerome.pasion@nokia.com>
As discussed on qt5-feedback / development lists.
Change-Id: If1733369d12daa29054776ec2cbd78e63679768e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Update the documentation to make it clear that regular test applications
should not call QTest::qExec() more than once. Also minor rewording of
description of return value.
Change-Id: I45bdf520ed10fd3c9232847a0ec0bc2b32d4caf3
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Automated tests often need to load some data from external files.
Currently, a wide variety of approaches for this have been used in Qt
autotests, including:
- embed the source directory into the test binary at compile time, and
find the testdata relative to that; this fails when the source tree
is no longer available (e.g. when the tests are deployed to a device).
- use a path relative to the current working directory, and trust that
the caller always sets the current working directory such that the
testdata can be found; this fails when the caller uses a different
working directory than expected.
- use a path relative to QCoreApplication::applicationDirPath();
this fails when source tree != build tree (since testdata is not
automatically copied into the build tree).
- compile the files into the binary using the Qt resource system; this
should work, but does not allow for testing of code which genuinely
needs external files.
It seems that there is not a simple method for determining the testdata
path which can be reliably used in all circumstances, so various tests
have reinvented the testdata location method in different ways.
Therefore, this is a good candidate for an addition to the testlib API.
The current implementation of QFINDTESTDATA is able to find testdata
in all three of (build tree, install tree, source tree), in that order.
Change-Id: Ib2fed860723ccf437240da3b00db22dfe1a6b56c
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
For compilations without variadic template support
Change-Id: I78af4f6022ad7a0923e5c5788a34eb7d834f50f3
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
It is already documented in the QObject API documentation, but
Also update the overview
Change-Id: I92f44a50222738530928e3f4e6e463b3210d3a29
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This add an overload to disconnect which is symetrical to the new
syntax of connect.
It is possible to diconnect connection like this:
QObject::connect( sender, &Sender::valueChanged,
receiver, &Receiver::updateValue );
QObject::disconnect( sender, &Sender::valueChanged,
receiver, &Receiver::updateValue );
This overload only work with pointer to member function, and not static
functions or functors.
The test is copied from tst_QObject::disconnect(), just
changed the syntax of the connection and disconnection
Change-Id: Ia8f819100cb12098e32877522b97b732b1e676a8
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
In addition to the old connection syntax, you can now connect using function pointers.
connect(sender, &Sender::valueChanged,
receiver, &Receiver::updateValue );
You can connect also to functor or C++11 lambdas
The connections are now type safe (no more problems with namespaces
or typedefs). Implicit type conversion is also supported.
The new syntax forces us to change the meaning of signal form
protected to public, in order to be able to access the signal's
address everywhere
The way it works is by introducing new overload of QObject::connect
that take function pointer as parametter. Those new overload are template
function, that are implemented inline. The actual implementation is
in QObject::connectImpl which take a QObject::QSlotObject* as parametter
for the slot. That slot object contains a virtual function which call
the slot which has to be implemented in the header as it depends on the
template parametter. So the internals of QObjectPrivate::Connection
will store this QObjectSlot* in order to be able to make the call.
You can read a full description here:
http://developer.qt.nokia.com/wiki/New_Signal_Slot_Syntax
History of commits before it was imported on gerrit:
https://qt.gitorious.org/~ogoffart/qt/ogoffarts-qtbase/commits/qobject_connect_ptr
Thread on the mailing list:
http://lists.qt.nokia.com/pipermail/qt5-feedback/2011-August/000796.htmlhttp://lists.qt.nokia.com/pipermail/qt5-feedback/2011-September/001248.html
(The discussions on the mailing list were about trying to find a
solution that do not need making signals public, but no user friendly
solution was found)
Note: support for QueuedConnection, and the symetric QObject::disconnect is
added in another commit.
Qt::UniqueConnection is not supported yet in the new overload.
Change-Id: I67d08436b0720e7f2992be9f7e34770960fa58fa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
-system-sqlite should be used when system SQLite library should be
used instead of the one embedded in Qt. This information is added
to SQLite driver documentation.
Change-Id: Ie51cb0d7c4044b74a64192ad8a5c946e21ee0ed9
Reviewed-by: Michael Goddard <michael.goddard@nokia.com>
This is a source-incompatible change.
TlsV1 is ambiguous; what is actually meant is TLS version 1.0. There are
also TLS versions 1.1 and 1.2; we might want to add options for these
once OpenSSL supports them (apparently they will be with OpenSSL version
1.0.1).
Change-Id: I940d020b181b5fa528788ef0c3c47e8ef873796a
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
* QDataStream format documented
* Added Unit test for QDataStream operators
* Updated Unit test
Change-Id: Idbcfcb0b927e6369e8d31b57693c7aa0d1a154e7
Reviewed-by: Olivier Goffart <ogoffart@kde.org>
When the SkipAll mode is used, tests only report a SKIP for the first
line of test data and subsequent lines are not reported at all. This
behaviour makes it impossible for anything post-processing test results
to accurately report test pass- and run- rates because they cannot see
how many lines of test data were skipped.
This commit removes SkipMode. QSKIPs in regular test functions and data
functions are treated the same as SkipSingle, so that every skipped line
of local or global test data is reported in the test log. QSKIPs
elsewhere are treated the same as SkipAll -- skipping in init() causes
the next test function to be skipped entirely, and skipping in
initTestCase() or initTestCase_data() causes all test functions to be
skipped.
This commit only changes qtestlib and the selftests. A further commit
will change the autotests to remove the SkipMode parameter from QSKIP
calls.
Note that the change in expected output for the globaldata selftest is
deliberate, as the QSKIP in the skipLocal test function has effectively
changed from SkipAll to SkipSingle.
Task-number: QTBUG-21851, QTBUG-21652
Change-Id: I7b1c53fe7ca9dde032810b789d967e2a402bbe5d
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Alex <alex.blasche@nokia.com>
This macro is no longer used in Qt's tests and encourages writing tests
in a way that makes test reporting less accurate -- remove it to prevent
further misuse. If a test can be determined at compile-time to be
inapplicable, it should be omitted from the build via .pro file logic.
If that is not possible (e.g. there is no suitable qmake variable), the
test's initTestCase() function should call QSKIP to skip the entire test
with a meaningful explanation.
Task-number: QTBUG-21851
Change-Id: Icacc8c5567a700191b6ef3fa94ee52ede94c5b34
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
create() is symmetric with destroy().
Also rename the internal methods and fields to be
consistent (qDeleteHelper already had the "right"
name, though!).
This change will allow us to use construct() and
destruct() for something else: Placement new-style
allocation (QTBUG-12574).
The old construct() is still kept for now, until
the other repositories have been updated to use
create().
Change-Id: Iceb184af6cffcb0a634359cfc3516c718ba0c2f5
Reviewed-on: http://codereview.qt-project.org/6342
Sanity-Review: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
These snippets where in qtdoc before, to modularize the documentation
they move to qtbase instead.
Change-Id: Icf430b6d0a0b26c9466b7df4d51721b53e5239cf
Reviewed-on: http://codereview.qt-project.org/6237
Sanity-Review: Jerome Pasion <jerome.pasion@nokia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@nokia.com>
Sanity-Review: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Remove the usage of Q_MAC_USE_COCOA and Carbon code paths.
Change-Id: Ib569ad8c6d9ffe258f454b3c3b06e95294a10112
Reviewed-on: http://codereview.qt-project.org/5100
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Sanity-Review: Morten Johan Sørvig <morten.sorvig@nokia.com>
Because of the merge of demos and examples all references to all demos
have to be updated. This is the update for the affine example.
Change-Id: I83f24010162a73e11786587365c6f10b51d4bf4b
Reviewed-on: http://codereview.qt.nokia.com/774
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: David Boddie
In 4.8 we added support for using StringBuilder with QByteArray.
But this is breaking source compatibility for people that used
QT_USE_FAST_OPERATOR_PLUS in Qt 4.7. So we introduce a new macro
Notice that QT_USE_FAST_CONCATENATION was not working without
QT_USE_FAST_OPERATOR_PLUS, so we remove the checking of that macro.
Reviewed-by: joao
(cherry picked from commit 8447f5616be731d78081f326bb9cb3f5aa9087a4)
