Change-Id: I55dcc1d188a2c45a11b0ab6a194625b50906eca9
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
QCalendarWidget currently uses Qt::Sunday as the default first day
of the week. It has been suggested that a better user experience
would see the calendar's locale be used instead.
Task-number: QTBUG-19811
Change-Id: I4441bf9ffd52213ef622a4a7f498530b7cc9e110
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
There can be occurences of \qmlclass where there is no C++ class (for a
pure QML Type for example). QDoc will ignore searching for a C++ class
when '0' is specified as second argument to the \qmlclass command.
Change-Id: I09c8c7ad302daffb0723a49967951ca623e646e4
Reviewed-by: Martin Smith <martin.smith@nokia.com>
Store the signal index in QObjectPrivate::Connection, thereby making
it available in "implicit" disconnect contexts (i.e., receiver
deletion).
This change does not cause the size of QObjectPrivate::Connection
to grow (still 40 bytes on 32-bit Linux, 72 bytes on 64-bit Mac).
Valgrinding the new benchmark indicates that the percentage of the
time spent in the QObject destructor increased from 7.8% to 8.4%
on ia32, for that particular stress test; the increase is the
combined cost of calling metaObject(), QMetaObjectPrivate::signal(),
and disconnectNotify() for one connection. In practice, the measured
wallclock time increased by about 3ms for a 500ms run (which
repeatedly constructs, connects, and destroys an object).
Task-number: QTBUG-4844
Change-Id: I1beb01c753f31542fc0acb62edb4c6d165fcc5b4
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
The Maemo-specific function have been renamed a bit to prevent them
clashing with the more generic stuff.
Task-number: QTBUG-25865
Change-Id: Id55693159e15d5a0c679546eb48308feb48acac9
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Some documenters are using two topic commands in a single qdoc
comment. This is only allowed for \qmlproperty so that multiple QML
properties can be documented with a single comment. qdoc now reports
an error for all other combinations of multiple topic commands.
Task Nr: QTBUG-26345
Change-Id: I1f9a6d2502ccffa76c2d41f961be3750014a0a56
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
These can't happen async, as otherwise the geometry of the widget is
changed too late, having the effect that QWidget::show_sys() would
overwrite the window geometry again.
Change-Id: Id60d009867a5b282ac14c112c872af1075660732
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
When calling SetWindowPos in QWindowsWindow::setWindowState_sys we must
inform the QWidget about the new size we have set.
Task-number: QTBUG-26226
Change-Id: I42b01125f50a94cdb97026c74f5445f9ff47d8ba
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
qmake is needed by autoDetection()/tryCompileProject() to be able to build the
tests. This patch also add a new method - generateQConfigCpp() - which
generates qconfig.cpp, needed to build qmake.
Change-Id: Ic304a364a13a2b3c28433f2a299df222a56fed67
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
If mask was set to a widget before the widget was shown,
the mask was not applied.
Also, if toplevel widgets were set a mask in Windows, the mask was
applied to frame coordinates instead of client coordinates.
Ported relevant code from Qt4 to fix these issues.
Change-Id: Id6187cf4952b81b5b60c167e2fd284b7dc83ed9c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
PlatformSupport is no longer shared and there should be no plugin
factory in it otherwise it will break plugin loading.
Since PlatformInputContext is already in QtGui, so move QPlatformInput-
ContextPlugin/Factory to resolve the platforminputcontexts plugin
loading problem. And remove platformsupport-private dependency from
existing inputcontexts plugin.
Change-Id: If4cb766470b8f9c8b72157da86cb33b4e1ff09e3
Reviewed-by: Pekka Vuorela <pekka.ta.vuorela@nokia.com>
QPair is small and is no problem to include from
qdatastream.h. However, including QDataStream from qpair.h means
including QIODevice and QObject too.
Change-Id: I344321e9f68438008ec329a165135c3a346c6058
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
QT_NODLL is replaced by QT_STATIC, but the latter is implied if
QT_BOOTSTRAPPED is already defined. Therefore, simply remove the
QT_NODLL definitions.
Change-Id: Iac7ec0b494b7a78197c25d59547f45eaf92d7465
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Up until now, we had a mess of different macros used for building
DLLs, for building shared libraries on Unix systems and for building
static libraries. Some of the macros were contradictory and did not
work. From now on, there shall be only:
- QT_STATIC: indicates that it's a static Qt build and the export
macros should expand to empty
- QT_SHARED: indicates that it's a shared / dynamic Qt build and the
export macros should expand to Q_DECL_EXPORT or Q_DECL_IMPORT,
depending on whether the macro corresponds to the current module
being built (the QT_BUILD_XXXX_LIB macro comes from the module's
.pro file)
QT_BOOTSTRAPPED implies QT_STATIC since the bootstrapped tools link
statically to some source code.
QT_STATIC is recorded in qconfig.h by configure when Qt is configured
for static builds. Nothing is recorded for a shared / dynamic build,
so QT_SHARED is implied if nothing is defined. This allows for the
existence of a static_and_shared build: with nothing recorded,
defining QT_STATIC before qglobal.h causes the export macros to be
that of the static form. Linking to the static libraries is out of the
scope of this change (something for the buildsystem and linker to
figure out).
From this commit on, the proper way of declaring the export macros for
a module called QtFoo is:
#ifndef QT_STATIC
# ifdef QT_BUILD_FOO_LIB
# define Q_FOO_EXPORT Q_DECL_EXPORT
# else
# define Q_FOO_EXPORT Q_DECL_IMPORT
# endif
#else
# define Q_FOO_EXPORT
#endif
The type of the Qt build is recorded in QT_CONFIG (in qconfig.pri) so
all Qt modules build by default the same type of library. The keywords
are "static" and "shared", used in both QT_CONFIG and CONFIG. The
previous keyword of "staticlib" is deprecated and should not be used.
Discussed-on: http://lists.qt-project.org/pipermail/development/2012-April/003172.html
Change-Id: I127896607794795b681c98d08467efd8af49bcf3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Primary goal, make the front page of the Qt GUI module a bit more
clarifying and avoid downstream references inside the Qt GUI docs.
Change-Id: Icbcfbb64b93963add889bf83711daa9575885c02
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
qobject.h includes it, but only if QT_NO_QOBJECT isn't defined. It is
during the build of the bootstrapped tools.
Change-Id: I8fc921fb17c283358af263a6932b763a21209d40
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
this was disabled before but
I2631ff687881278ba42edacd237a2130c103b69f
enabled it per default
Change-Id: Ic5a8e50d116cf6b15719668faf055967a6f34e06
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Copy-and-paste error; the doc was based on QObject::receivers.
Change-Id: I4f6ce716d388328e0345e8457cbc99fff323ce41
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Since QStateMachine inherits QState, QStateMachine::finished() and
QState::finished() are the same thing.
Task-number: QTBUG-14553
Change-Id: I7df2f815be377c19aeee393e9a2ce124183dc5e1
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
This test had been XFAILing since August 2011, but recently started to
XPASS, possibly due to changes in the SSL setup on the tested host
(qt.nokia.com).
Removed QEXPECT_FAIL and replaced qt.nokia.com with
codereview.qt-project.org as a host expected to have working SSL. (If
SSL on the latter were broken, it would immediately be detected by
any attempts at git over HTTPS.)
SSL setup can be verified as working by:
openssl s_client -CApath /etc/ssl/certs \
-connect codereview.qt-project.org:443 </dev/null
Task-number: QTBUG-20983
Change-Id: I9b4146da6545ab4115d6308044b1d242dd52b7f9
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Do not go searching for a parent window handle in
setMask_sys() as this causes for example MDI areas
to set masks that show the child only.
Fix breakage introduced by 8e280d1e18 .
Change-Id: I57de41d16985ebc8d3fc81153a671f2e2807b1eb
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Now QQuickView::showFullscreen() works as expected.
QQuickView has no fallback for platforms without window state support,
as opposed to QWidget.
Change-Id: I9c41fe563ea1f6d117eaebd3ea1db87465142b85
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
This fixes a painting glitch where the window would stay in the old
position with the old rotation until it got repainted.
Change-Id: Id9de256b525760e8b32e55a87549efeccca151e0
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
filterEvent for QPlatformInputContext is already used for auto repeat
key, x11FilterEvent also need to be filtered.
Task-number: QTBUG-25795
Change-Id: I3db87fdffdb5b01404047e905793ae6e10bb1e90
Reviewed-by: Pekka Vuorela <pekka.ta.vuorela@nokia.com>
This will make it easier to handle cases where the Qt installation
and the build do not match exactly. For example, on Windows, it
would be possible to do:
./configure -debug
make
make install
make release
make release_install
In which case, both debug and release libraries would be installed
even though it was only configured with -debug. On non-Windows, the
debug and release libraries would overwrite each other, so it is
not necessary to support it.
Similarly, we want to handle cases in the future where (on
non-Windows) both static and shared libraries would be
installed (again, not described with a single build configuration).
Change-Id: Ib7916c9664a0f72e40156a03bdfc79a4a6c24350
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
foreach already knows how to iterate over the values without the need to create an intermediate qlist
Change-Id: I4622a36fbdbf536a75f26b42e32488a77d078f02
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
I'm pretty sure I've caught all uses of deprecated methods throughout
the Qt codebase, except for the ItemViews changes and for QtWebKit
(which must still compile with Qt 4).
Change-Id: Ic17801b71434fa41c647f97c9e5e4234ad4f9af0
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The interfaces may change in Qt minor versions.
Change-Id: I43bc6245ddbba8232e00313bdc64e8e60c7eab6f
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Raising or lowering a native widget needs to raise or lower the
associated platform window, too.
Task-number: QTBUG-26344
Change-Id: Ib847d97df86857d92bcc4c9c0dd51219575d8db1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Remove a non-ascii character from configureapp.cpp to let it to be
compiled successfully with MSVC2010 x64.
Change-Id: I0b016630be49e8731cc438abca4ef959124138be
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
XLFD fonts are no longer supported in Qt 5.
Change-Id: I83400dab417c933d5cd956c0d168c45b9d79dab7
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
qmake can now produce proper mixed-target projects
Change-Id: I797f055f6e1487b9aefb75eee91d6c2cc4e6e56e
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Icon support was disabled in QPA menus, now QIcon is in QtGui, convert the QPA interface, enable setting the icon in QMenu, and make the Cocoa implementation use it. (And fix a ref-counting leak if an icon is actually set)
Change-Id: Ica203bf6826b79d8beee58f39febc851b9633a66
Reviewed-by: Christoph Schleifenbaum <christoph.schleifenbaum@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Tests against the test data from the IETF working group
https://github.com/abarth/http-state
The test data is in the parser.json file, imported from that repository
and with one patch applied to make the ordering0001 test case data match
the raw files which are used by their python test server.
Task-number: QTBUG-18920
Change-Id: I17c1a8d92aef2850907f009667c6574e4c8d0cdb
Reviewed-by: Richard J. Moore <rich@kde.org>
As required by RFC6265, if the date can't be parsed then the
attribute should be ignored but not the whole cookie.
Task-number: QTBUG-15794
Task-number: QTBUG-16798
Change-Id: I2ed2fbbaf2d00b194995349c24b174032a599703
Reviewed-by: Richard J. Moore <rich@kde.org>
As recommended by RFC6265.
This fixes the optional-domain0042 test case.
Task-number: QTBUG-15794
Change-Id: I6dd459797afcb52fa2a78437f8481f5abc6f3105
Reviewed-by: Richard J. Moore <rich@kde.org>
Url encoding of paths is no longer used. This matches the
current release behaviour of Firefox, Chrome and MSIE browsers.
RFC6265 does not allow this type of encoding.
This fixes remaining path test cases in the IETF test suite.
Currently the path0027 test is passed by Firefox but failed by
Chrome and MSIE, so there is a potential compatibility issue.
However it is a corner case with a malformed cookie.
Task-number: QTBUG-15794
Change-Id: I9b02bb5adc32d614f512d314d06f2c60894aa2b0
Reviewed-by: Richard J. Moore <rich@kde.org>
The ';' separator takes priority even inside a quoted string.
Quotation marks have no special meaning, they are not parsed and
regenerated anymore. This means it is not possible to include
the ';' character inside a cookie value.
Other characters are returned transparently, including [",\]
Task-number: QTBUG-15794
Task-number: QTBUG-26002
Task-number: QTBUG-11641
Change-Id: I4eefef5c6ac7753d5a21c226169e264578521fe9
Reviewed-by: Richard J. Moore <rich@kde.org>
If unparsable, ignore the max-age attribute but process the rest of
the cookie normally.
If max age <= 0, set expiration time to "earliest representable time"
To keep this a safe value for conversions, time_t of 0 is used.
This fixes cases 0019 and comma0005 in the test suite.
Due to this change, cookies may be sent after they should have expired
in case the max-age was malformed. Previously they would have been
discarded immediately, which is more likely to break web services.
Task-number: QTBUG-15794
Change-Id: I7882af8eb37db156785e4e358ca639e90c94f8d0
Reviewed-by: Richard J. Moore <rich@kde.org>
