This change simplifies memory management as long as it doesn't requires
manuall calls to qDeleteAll and manual deleting/nulling pointers.
Change-Id: Id0dc563d0b1e74ae33939d90d4b39999020cd7ce
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
POSIX specifies that tzset() consults environment variable TZ and
modifies some globals; it also specifies mktime(), localtime() and
strftime() to behave as if they called tzset(). Fortunately, we only
call strftime() from a test and only call localtime() when not
threaded. Provide wrappers for tzset() and mktime() that share the
lock used by our environment-access code, to prevent races on the
environment (and tzset()'s globals) when we call them.
In the process, re-use tst_QDateTime's TimeZoneRollback in its older
test systemTimeZoneChange() and presume that this can now be tested
cross-platform, since TimeZoneRollback is used in another test where
this works.
Fixes: QTBUG-71030
Change-Id: I79f559b8857ea2803e73501008bf0d7158c6731f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QWidget::isEnabledToTLW() and QApplication::setKeypadNavigationEnabled()
are deprecated for a long time but not marked as deprecated. Therefore
add QT_DEPRECATED and guard them with QT_DEPRECATED_SINCE(5, 13).
Change-Id: I12a76597aaad71025e4b7ad251dd67be55f8f966
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Mark some long deprecated functions as deprecated so they can be removed
with Qt6.
Change-Id: I2ccd21c829c954b6a3662799070682dbe71fd693
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
This is not valid, but was confusing before and would be silently ignored,
warn instead.
Fixes: QTBUG-50583
Change-Id: If78c4a5ef96c76e1d5116a1bd24e5c289ff74cc4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This test works for me with KWin and is blacklisted on most linux platforms.
Let's try to remove the blacklisting next.
Using qWait right in front of the QTRY_VERIFY does not add any value.
Task-number: QTBUG-26424
Change-Id: I2dcd5fb3f3cbb64e190c777231b791d1ad9dd704
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
There is no docker bridge on macOS. Docker document recommends using
port mapping to connect to a container; but it causes a port conflict
if the user is running a service that binds the same port on the host.
An alternative solution is to deploy the docker environment into
VirtualBox and use the host network option.
Task-number: QTQAINFRA-2293
Change-Id: I05dc65c5f8b4be7a1b1874a4ec7c034cc68679ca
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The internal and external keywords in the server configuration are used
to specify the network interface (IP address) that the Dante server
should bind to. Because docker-compose allows a container to join more
than one network (by adding multiple entries under the top level
networks key to a docker-compose file), the default server
configuration (danted.conf) shall be updated in accordance with the
settings in the docker-compose file.
The user can pass the setting of a docker-compose file to containers by
adding environment variables in the docker-compose file. After the
container gets created, the danted.sh script uses the input environment
variables to overwrite the default value of internal and external
interfaces before starting the Dante server.
environment:
- danted_internal=eth1
- danted_external=eth1
- danted_auth_internal=eth1
- danted_auth_external=eth1
Change-Id: I7c65cdd136ba5dac387bee5e22e1f4335e960101
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The hue parameter in hsl/hsv was treated the same way as a the other
parameters although it's range is from 0-359 and not from 0-255.
Fix it by extending the maximum range for the first parameter when
parsing a color value given in hsv or hsl.
[ChangeLog][QtGui][CSS] Fix the range of the hue parameter when parsing
a color given in hsl or hsv
Fixes: QTBUG-70897
Change-Id: I9ffa65a89c0abcca62bae35777ca1cbde3375180
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The Qt stylesheets color property did not support hsl or hsla although
CSS 2.1 does support it. Since QColor natively supports this color model
only the color parsing needed to be adjusted.
This also adds some stricter checks for a valid css color definition and
prints a warning about the issue.
[ChangeLog][QtGui][CSS] Added support for hsl/hsla colors
Fixes: QTBUG-58804
Change-Id: Ief65a36a7e0ed0d705dc1fe5a8658e8d07fe9a13
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Only QGuiApplication would emit the signal. Untangling the duplicate
code is rather non-trivial, so left alone for now.
Fixes: QTBUG-71186
Change-Id: I4021e3b9ff39718562f4fa3a03c092436b559e9a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
A few member functions of QCborValue and QCborValueRef were given special
declarations for qdoc to see so that they could be documented as a single
function, but because clang is now used to parse c++, the special declarations
caused parsing errors.
The declarations for qdoc are removed in this update, but the functions are
still documented with a single comment by grouping the \fn commands for the
similar functions together in the single comment.
Change-Id: If97ee2f2bfcd045d2259a4375b31b8884eeb1072
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Martin Smith <martin.smith@qt.io>
Use unique_ptr instead of plain array. No need to call 'delete'.
Change-Id: Ia77f4f209b1fd83391428d8b82b7acbba48781b9
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This doesn't add any value and just complicates things.
Change-Id: I3a011174e330f212eda99371d2806517ceec45d7
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
It's needed to generate a pkcs12/pfx bundle from our
certificate chains which are then imported into a certificate
store in Schannel and then passed to various Schannel API.
Change-Id: Idb88f42f2aa15eb91c52404ee6c57bf43e983379
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Some of the enums were cast to int on comparison. That just makes it
harder to know what the values were.
And verifyClientCertificate had 4 cases which were named the same as 4
others.
Change-Id: I09e8e346a6f416236a92073cf9a8f349938d37ef
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
toolBarArea took non-const even though const would have been enough.
In the public API do this for Qt 6.
Fixes: QTBUG-45953
Change-Id: Ic99f4dd5a7f344d49d046e3b084b68120f8de3c0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
These inclusions are necessary when compiling without pre-compiled headers.
Change-Id: I4345ad3f6882046e4b8f2ba9d315299e280c9f18
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When the scroll mode is ScrollPerItem and uniformRowHeights is not set,
the offset has to be calculated by iterating over all items.
Optimize the loop by calculating the last item before the loop instead
of checking at every iteration.
Task-number: QTBUG-61763
Change-Id: I1d4439fe0fc3f32194f5f368c0486e793048d965
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
When painting the background for a QAbstractScrollArea, the brushOrigin
was calculated for every brush type although it was not needed. Since
this can be very time consuming (e.g for a QTreeView with non-uniform
row sizes) it should be avoided when possible.
Therefore check if the brush is a texture and skip the calculation if
it is not the case. Also do not restore the old brushOrigin since the
painter is not used at all afterwards.
Task-number: QTBUG-61763
Change-Id: I66cbe1b796cb5cad4c78e656fb86d199d8e4bde9
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
it must end up in front of QMAKE_LIBS{,_PRIVATE}, but not of
LIBS{,_PRIVATE} (which are preceded by QMAKE_LIBDIR).
Task-number: QTBUG-61982
Started-by: Liang Qi <liang.qi@qt.io>
Change-Id: Id3de01ee0e9b66af02f79949aeb5a0eabd55363f
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
In NDK r18, libc++.so was renamed to libc++.so.XX where XX is the Android
API level.
[ChangeLog][Android] Fixed build issue with NDK r18+.
Task-number: QTBUG-70631
Change-Id: Id0d2955648197e3054e3c69263b5a90d57964f6c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
the early merging of LIBS* into QMAKE_LIBS* meant that we could not
interleave them properly. defer the merging until the points of use.
Task-number: QTBUG-70779
Started-by: BogDan Vatra <bogdan@kdab.com>
Change-Id: I890f98016c3721396a1f0f6f149a9e2b37d56d8e
Reviewed-by: Liang Qi <liang.qi@qt.io>
it's unused now, and just complicates matters. its interaction with
LIBS_PRIVATE & co. has always been a bit shaky. google produces no
public hits outside qt itself, so let's assume it really remained
internal.
Change-Id: I6606bbabd44f1b76d84e97219e155e38d6f1b3a6
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
this was introduced in 2002 supposedly for qnx4, but doesn't appear to
have actually been used ever. remove it, as it's in the way now.
Change-Id: I54dcabb61e1d3609a1e7a9fa4ff4b25509cfdb7a
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
QWinRTBackingStore::flush() was not considering the possibility
that the supplied region may fall partially outside the bounds
of the paint device. This resulted in possible accesses to invalid
memory addresses, causing a crash. This bug was exposed by an update
in ANGLE that was causing a crash when running tst_QTableView::bigMode
with a small screen size. With this fix the function will use the
intersection of the supplied region with the paint device bounds.
Change-Id: I2f0f0f7f5510688bfa1459320a0c146df6be65d1
Reviewed-by: Miguel Costa <miguel.costa@qt.io>
lld for coff/mingw doesn't support linker scripts, which qmake used
for passing larger numbers of input file names to the linker.
Instead of using a fullblown linker script for this, just use a plain
response file, which both lld and binutils ld support.
Change-Id: I3aace7902fa6ca861a0a9fe67feaa236e7ea417b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This reverts 4fe68ffbe5,
1dfc16f6da and
9545bee98a2431d4ef4c3449631a5fcb8d9bd57a; this feature has not been in
use for some time, so is just dead code.
[ChangeLog][QtTestLib] Removed support for GPU_BLACKLIST files.
Reimplementations or equivalents of QTEST_MAIN() should remove their
uses of QTEST_ADD_GPU_BLACKLIST_SUPPORT and its _DEFS; they are still
vacuously defined, but serve no remaining purpose and shall be
undefined in due course.
Change-Id: I94ffd5c37ce4e1f7cf25d3c7ae8d40696b74c911
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
It is not always easy to spot the compiler version in the build or
configure log, so report it explicitly to make our lives easier when
trying to figure out why a specific build might have failed.
Change-Id: I1c84199aad4a98a30b0b4c4fbf2554008dc3ba2d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This reverts commit 341bfcd1ea.
As it turns out there might be use cases where we want to have proper
windowing system event integration with glib dispatcher via g_source_attach().
For example with gtk_dialog_run, where GTK blocks in a recursive main loop.
We want to continue dispatcing our windowing system events during this nested
event loop. Not having a proper glib integration can result in rendering issues,
e.g. when resizing parent window via mouse while GTK-based dialog is shown. Can
be seen on examples/widgets/richtext/textedit/ -> Format (from menu) -> "Color..."
The issue from 341bfcd1ea actually should be fixed inside XCB platform plugin,
by improving integration with event dispatcher. That is handled in follow-up patches.
Change-Id: Icabc6d841a554aefbdd460765a3165d22e65f651
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
xcb_poll_for_queued_event() was introduced in libxcb 1.8.
The minimal required libxcb version was bumped up to 1.9 in
1f5d791708. Before this version
bump we needed the runtime check to support older versions
of libxcb.
Updated connections in the event reader to use the new signal
and slot syntax. Removed threadedEventHandling() method because
now it is always 'true'.
Change-Id: I0bce61fd478a871d35e676239ee5280c4f40be8a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We had this information internally but there was no public API for it
Fixes: QTBUG-4071
Change-Id: Ic7f855e32a6870129e7723a47d31a629e0ea1aca
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
This is an opt-in feature to control whether font and palette should
be propagated, and there is no reason this should be removed in Qt 6.
This has been introduced in commit
7293200ace .
Change-Id: I666c09d716bf7033953e98108da3f7711f3bc321
Reviewed-by: Samuel Nevala <samuel.nevala@intopalo.com>
Reviewed-by: Martin Koller <kollix@aon.at>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The flakiness was reported for macOS 10.8 a long time ago and I
am not able to reproduce it, so lets remove the workaround for
it.
Task-number: QTBUG-32690
Change-Id: I92e64065c7480b8f4c5d1d1e6cb5fdd218a70313
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
A few places we didn't check if detach() succeeded including
in reinterpretAsFormat(), where it can be undone.
Task-number: QTBUG-70785
Change-Id: Ibcc8e26e2961f6288eb7a045ae1cb28e59213a49
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
This fixes configure with win32-clang-g++ as the native compiler.
Change-Id: Iced43d70b9a0aa413d1f5f6034b42b976cb7c39e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
QWidgetTextControl is a base class for controls of text widgets
and widget-specific code should be used in derived classes, so
override loadResource() in QTextEditControl.
Change-Id: I6d829ead0837419530094d19e0ca53a964413e92
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
and fix handling of incoming binary data
Change-Id: I31e97505ad4ff64cf8e380df5d0d6b70c3cd60b0
Reviewed-by: Ryan Chu <ryan.chu@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
