... to make large data usable from other test functions.
Pick-to: 6.5 6.5.0 6.4 6.4.3 6.2
Change-Id: I302070121a8bb49f373c7711bc3ab9e6418874ef
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QAIM::match() supports different matching modes. The wildcard match mode
was never meant to be specifically a filepath globbing wildcard, but
rather a generic one -- something like "*" should match into a
string like "a/b/c". This is a regression from Qt 5, where
QRegExp::Wildcard was ported to only allow for path globbing
rather than generic matching.
[ChangeLog][QtCore][QAbstractItemModel] QAbstractItemModel::match()
now uses more generic wildcard matches rather than file path globbing.
Please refer to the documentation of
QRegularExpression::wildcardToRegularExpression() for more information
about the differences.
Change-Id: I28b8a76b01fdd9c5dd8f99528fac1c7b704564bc
Fixes: QTBUG-104585
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Amends 76c63936d3 by adjusting the test case.
We still just test that we can open a file based on a filename that we came
up with ourselves.
Also, update usage documentation and make the snippet a bit more relevant.
Change-Id: I5bf00210d74e2a73d5a71a09a5beb1b3f6f8e225
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
QTemporaryFile is not designed to promote temporary files
to non-temporary files. So, it, quite importantly, does not
care if the content of the files are flushed to disk before
renaming it into its 'final' destination. This is what
QSaveFile is for.
This was much more time-consuming than intended since I had to debug
this quirk about calling size().
Pick-to: 6.5 6.4 6.2
Fixes: QTBUG-111397
Change-Id: I15b300f6a5748ad3a0be983545ea621269a12ecd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add support for shader input output interface blocks in Metal
tessellation pipelines. This feature is builtin to other rhi supported
tessellation backends (OpenGL/Vulkan).
Metal tessellation is implemented as compute pipelines for vert and
tesc, and a render pipeline for tese and frag. The shader conversion
from GLSL is handled by SPIRV-Cross, which has a particular way of doing
things. Rhi must setup the vertex inputs for the tese - frag render
pipeline to read from buffers written by the tesc compute pipeline,
following SPIRV-Cross conventions. This includes ensuring correct
memory alignment per MSL Specification.
In order to enable input output interface blocks, reflection of struct
members of QShaderDescription::InOutVariable is required. Reflection of
QShaderDescription::BuiltinVariable array dimensions is also required to
support variable size tese builtin input gl_ClipDistance.
An acompanying patch to QtShaderTools is required.
Change-Id: Id94e86caef211485afc187bb79fe3d0619d02cf0
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
QPropertyAlias might be deprecated, but using it should still not fail
to compile.
Pick-to: 6.5
Fixes: QTBUG-111735
Change-Id: I486cddb424b60cd3e5c539e26afca3726e29bb09
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
If a composite widget is put behind one of it's contained children via
QWidget::setTabOrder, then our logic might replace the composite widget
with the contained child. In that case, we'd end up with a broken tab
chain, possibly resulting in incomplete clean-ups and triggering asserts
when shutting down the UI.
Handle this by stopping the last-child searching logic at the respective
other widget, and by not allowing both widgets to be the same.
Augment test case, and apply some minor refactoring to the code.
Pick-to: 6.5 6.2
Change-Id: I7d97dfa85315b6c01daa283253025d94a1727048
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
The choice of whether to show a message again is per message,
so when showing a new message we need to reset the check box
back to its default checked state, otherwise the user might
mistakenly dismiss more than the indented message.
[ChangeLog][Widgets] QErrorMessage will now reset the check
box for showing a message again for each new message shown,
as each individual message has its own suppression state.
Pick-to: 6.5 6.5.0
Change-Id: I86d4bb5eabdb5b7a478c03516108a5edf87fcbe3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The parameter names were previously "lhs" and "rhs", which is incredibly
abstract for a testing framework. One of the parameters will tend to be
a baseline value to compare against while the other is the result of
some action we want to test. Thus I suggest they be renamed "computed"
and "baseline".
This way we can, hopefully, retain the semantic that the 'left'/first
argument is the computed ('actual' in QCOMPARE) value while the
'right'/second argument is the baseline ('expected' in QCOMPARE.)
Change-Id: I3e0fdce2a3f1faca06fdf7184ef6e0eb9724d990
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
A glob pattern has different semantics depending on whether
it's used in "filepath mode" (FNM_PATHNAME) or not.
QRegularExpression only implemented the former, but the latter
is also useful, and possibly more "intuitive" for certain use
cases (e.g. offering users a simplified version of regexps that
however still need "*" to match a "/").
Add this support. The problems highlighted by QTBUG-111234 have
not been addressed, I've just amended a bit of documentation
relating backslashes.
[ChangeLog][QtCore][QRegularExpression] Support for non-filepath
wildcards has been added to wildcardToRegularExpression().
Fixes: QTBUG-110901
Task-number: QTBUG-104585
Task-number: QTBUG-111234
Change-Id: If9850616267980fa843bda996fcb4552b5375938
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Not relevant for the CI as that does not run with any real Vulkan
implementation. (and Lavapipe works if that's used)
As the investigation in the Jira issue shows, there is no proper
conclusion yet on why rendering to a slice of a 3D texture breaks
the content of other slices that have image data written to them
before that render pass targeting the slice. It would seem that
transitioning to COLOR_ATTACHMENT_OPTIMAL has some unexpected
consequences for slices that are not targeted by the render pass
with Mesa on Intel.
(NB rendering to a given 3D texture slice works via
VK_IMAGE_CREATE_2D_ARRAY_COMPATIBLE_BIT; and how often this is needed
in practice is unclear, typical volume rendering cases will anyway
likely just upload data to the slices of a 3D texture, not rendering
to them)
The problem is still clearly visible in the tex3d manual test (when run
on affected Linux machines), this we keep unchanged for the time being
so that the issue can be examined further. However, the autotest is
changed to prevent the issue from occurring (render to slice first,
then upload to other slices) since it causes confusion when the test
is run locally on various developer machines.
Pick-to: 6.5
Task-number: QTBUG-111772
Change-Id: I4dc4c2413f8c518f377a33065992ad786a5ff44f
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Separate 1D mipmap generation support from rendering into an 1D texture.
Those are two independent features, so have a separate feature flag for
both instead of using just one.
This will then be symmetric with the 3D texture features, where now we
have a new flag to report support for generating mipmap for 3D textures.
(whereas 3D texture as a render target is already covered by
RenderTo3DTextureSlice)
Change-Id: Ie5e1f056a7d1c341d90cd7fc522877a3f2da3290
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
The polyfill for file input on WASM now makes use of the supplied
filter list.
Some changes were introduced in the abstraction for filters so that
they are usable both for the new file API and the legacy file input.
Change-Id: Id6341be4d6a1647e17382d13da7be42491cfaf80
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The note that QSqlDatabase::exec() is deprecated was added more than 12
years ago so it's time to also mark the function as such.
Change-Id: Ic5e7c31b3ff5b21e16e2640548cba1a4baaeeb1c
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Apple lets us know that:
warning: 'sprintf' is deprecated: This function is provided for
compatibility reasons only. Due to security concerns inherent
in the design of sprintf(3), it is highly recommended that you
use snprintf(3) instead.
Pick-to: 6.5
Change-Id: I3130b3c7b636466b5e77adc5cb05ad4ce1faee11
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We test moc's support for [[deprecated]], so don't warn about it.
Pick-to: 6.5
Change-Id: Ifda2b81c14cb9802db4bb1d0a1eb17d978ad492a
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
remove toHex() as it's not used at all and qTableName() with two params.
Also remove some SQLite 2 specific stuff
Change-Id: If285febdfbee5833f7174d70f386bd54674bd539
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Use a scope guard to print debug info in case of an early return.
Silences clang warning about sprintf being unsafe and deprecated.
Change-Id: Idcbfde1a6f2eb1143f51c1e5ecedbf3fe90d8ec8
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
The doc said positive values for a negative range were intermediate
but the code actually rejects them if the value has an overt plus
sign, so make clear that intermediate is only for the case without a
sign. Incidentally comment on a test where it might not have been
obvious to the reader that a space is the locale's digit-grouping
chracter.
Pick-to: 6.5 6.5.0
Change-Id: I3edab74fe8c2cbe8448c0e523676f1fd0d0d8a9f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
From the manual page:
Note: modern applications may prefer to use the interfaces
described in utimensat(2).
Change-Id: Ib20d8b9b50626233852ca351452ce90841a39603
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Make sure to properly close the cloned database connections and allow
one test for sqlite
Change-Id: Ia4eb4a684a3c432844e4b2a77bff69655b53f9b2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This example is useful but not a typical starting point for an
application.
Task-number: QTBUG-110647
Pick-to: 6.5
Change-Id: Ic4af8ed648c587b91110a7403fa80c619549289d
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Make them templates, for two reasons:
- so they can accept std::pmr types and, in general, any basic_string
with custom allocators and char_traits
- to break overload ambiguities with the Qt string view types
Also, add the missing C++20 char8_t overloads.
Also, avoid creation of a QString in the sizeof(wchar_t) == 2 case
(Windows). Add a comment to optimize for the sizeof(wchar_t) != 2 case
later.
Found in API review.
Pick-to: 6.5
Change-Id: I30139520f582a38863a0936f8eca4b1ed33e37c8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
otherwise there is no way to synthesize a "click" through the a11y API.
toggleAction only leads to a toggled() signal but the user may be more
discerning and only listen to clicked() (or QAction::triggered) to react
to **user** events not all toggle events. as such pressAction is always
superior to toggleAction when user input is meant to be synthesized
through a11y tooling.
Change-Id: I7f024d57087b545d3cfd1805026ea538b0b3e166
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
C++20 doesn't like arithmetic with enums anymore. While this hasn't
caused immediate pain, yet, fix it pro-actively for an imminent patch.
As a drive-by, fix the missing space at start of comment.
Pick-to: 6.5 6.4 6.4.3 6.2
Change-Id: Id08bb227c587bc7b900c593a7b6d2655ca32eefd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Also add one for types that are neither copy- nor move-constructible.
In contrast to resize(n), the QVLA(n) ctor worked for such types, so
make sure it stays that way.
Pick-to: 6.5 6.4 6.4.3 6.2 5.15
Change-Id: If54fbc9dd6a4808175c4bcb0ffb492b33c879746
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Use it in a few places.
[ChangeLog][QtCore][QMessageAuthenticationCode] Added
QCryptographicHash-style resultView().
Change-Id: I745d71f86f9c19c9a9aabb2021c6617775dab1cf
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Both QTimer's and QObjectPrivate's destructors print a warning if the
current object lives on another thread and has an active timer:
QWARN : tst_QTimer::moveToThread() QObject::killTimer: Timers cannot be stopped from another thread
QWARN : tst_QTimer::moveToThread() QObject::~QObject: Timers cannot be stopped from another thread
This timer is used to ask the thread to quit, which in turn allows us to
destroy this QObject without a cross-thread warning. Because it's
already fired once and done its duty, we can make sure it's not active
by simply making it single-shot.
Pick-to: 6.4 6.5
Change-Id: Ieec322d73c1e40ad95c8fffd17465067b27c044b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
A click on the selected item should deselect all other items before
editing starts.
Remove the part of the test case that assumes that we can have multiple
items selected in ExtendedSelection mode, and click on an item to start
editing while maintaining selection. That can never happen.
Pick-to: 6.5 6.4 6.2
Fixes: QTBUG-111131
Change-Id: I0312eed4614502cfb77eca26d3f7615427493d7d
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
The documentation for the RelationFlag enum was not very clear on what
was the "first" and "second" object.
And the fact that the AT-SPI backend (which these enum values originates
from) inverses "first" and "second" makes it harder to understand what
how it all fits together.
So when (with this change) Qt documents 'QAccessible::Labelled' as
"The returned object is labelled by the origin object"
AT-SPI documents ATSPI_RELATION_LABELLED_BY as:
"The origin object is labelled by the returned object"
(Documentation for AT-SPI is rewritten so that it shares the same
terminology)
Notice that the two objects are exchanged, which means that even if they
use the same 'Labelled' relation, the semantic gets 'inversed'.
This is already the case today, so we cannot change it. Therefore, to be
clear, the relation mapping will remain to be like this:
Qt Relation | Maps to AT-SPI | Qt explanation
----------------+-------------------------------+--------------------------------------------------------------------------------
Label | ATSPI_RELATION_LABELLED_BY | The returned object is a Label for the origin object
Labelled | ATSPI_RELATION_LABEL_FOR | The returned object is Labelled by the origin object
Controller | ATSPI_RELATION_CONTROLLED_BY | The returned object is the Controller for the origin object
Controlled | ATSPI_RELATION_CONTROLLER_FOR | The returned object is Controlled by the origin object
This mapping can already be seen in qAccessibleRelationToAtSpiRelation()
For the record, these future relations should then be mapped to like
this:
Qt Relation | Maps to AT-SPI | Qt explanation
----------------+-------------------------------+--------------------------------------------------------------------------------
Described | ATSPI_RELATION_DESCRIPTION_FOR| The returned object is described by the origin object
DescriptionFor | ATSPI_RELATION_DESCRIBED_BY | The returned object provides a description for the origin object
FlowsTo | ATSPI_RELATION_FLOWS_FROM | The returned object has content which flows logically to the origin object
FlowsFrom | ATSPI_RELATION_FLOWS_TO | The returned object has content which flows logically from the origin object
Change-Id: Ib245ec95564e4886dc6dbbb68abec2b23cd0e534
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Michael Weghorn <m.weghorn@posteo.de>
Runtime support is indicated via QRhi::Feature::HalfAttributes.
OpenGL support is available in OpenGL 3.0+, OpenGL ES 3.0+, and in
implementations that support the extension GL_ARB_half_float_vertex.
Other RHI backends (Vulkan, Metal, D3D11, and D3D12) all support this
feature.
Note that D3D does not support the half3 type. D3D backends pass half3
as half4.
tst_qrhi auto unit test included.
Change-Id: Ide05d7f62f6102ad5cae1b3681fdda98d52bca31
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Amends 0242be9060, and removes unwanted
side effect of having a modified style behavior for later functions.
Pick-to: 6.5 6.4 6.2
Change-Id: If3dff0d7ab9e6c6c10e7a92d0a3eaff98fa1457f
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Add Algorithm::NumAlgorithms and use it to iterate over all
statically-available algorithms, querying their hashLengthInternal().
This avoids having to statically_assert(<= MaxHashLength) everywhere,
and auto-adjusts the buffer size in SHA1_ONLY builds.
Yes, the extra case labels for NumAlgorithms are a nuisance, but at
least the compiler will remind us when we forget, unlike a missing
static_cast(<= MaxHashLength) that might easily be forgotten.
Adjust the test (which iterates over the QMetaEnum for
QCryptographicHash::Algorithm, so finds NumAlgorithms and tries to
pass it to the hash() function which responds with a
Q_UNREACHABLE(). Only test hashLength() == 0 for that enum value.
Pick-to: 6.5
Change-Id: I70155d2460464f0b2094e136eb6bea185effc9d5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Only Ukrainian is actually recorded in CLDR as using U+0415 as
exponent separator; all other Cyrillic-using locales officially use
plain ASCII 'E'. However, it seems reasonable, in all Cyrillic
locales, to recognize both (given that they look very similar).
Task-number: QTBUG-107801
Change-Id: I70a1e60a2d9fe7e254e01d32c5bad909ea4b8c76
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
